ZEN SLEEK PHOTO & WINDOWS 98 SE!! AAAAAARGGH!

Hi!
Apologies in advance if this problem has already been raised and addressed, but due to a mismatch of information, I find I have now invested in a lovely mp3 player (namely ZEN SLEEK PHOTO) I can't use. The problem? It's mimimum OE requirement is XP and I'm still running WINDOWS 98 SE. Okay, obviously the solution (ahem) is to upgrade to the XP System, but, I'm hearing all sorts of talk of driver updates, installations, fixes etc and wondered if someone knew of any available remedy here on Creative. At the present time, the installation disc is not chuffed with the OE system and I can get no further.
Anyone have any nice, straight-forward step-by-step solution they'd care to share?
Cheers
TinoMessage Edited by TINOBEN on 0-04-2006 09:34 PM

<EM>It's a PlaysForSure device, and uses the same drivers any other PlaysForSure device uses. It's standardized.</EM>
I've finished downloading the drivers required. Do I now just need to connect my player or am I required to install the software on the ZEN SLEEK PHOTO first? The last time this was unsuccessful because of the Operating System. So if all this works, I'm guessing that it will be a case of transferring mp3 files (hopefully straight from my hard dri've through WMP) into the Zen player.
Can you please confirm the procedure using WMP?
Peter

Similar Messages

  • Creative Zen Sleek Photo & Windows Vi

    I've got a Creative Zen Sleek Photo player, and I just got a new computer for school. Since all new computers come standard with Vista, I can't download any of my Creative software because it is not compatible with Vista. Is there any kind of?download update or file that I can get so that I can make the software compatible and install it's

    You do not need to install the software on the disc. The driver is nati've to the Vista OS. Windows Media Player can Sync to the player rip cds, ect.

  • ZEN Sleek Photo & Windows 2000 p

    I have recently purchased a ZEN Sleek Photo (firmware version .0.0e). I bought this from Argos, where it states quite clearly in the catalogue "Minimum PC specification Microsoft Windows 98SE/Me/2000/XP..." After finding the software refused to install on Windows 2000, I contacted Creative. Customer services refused to help, and I found their general attiture offensi've. On contacting Argos, their reply was "As it states on the website I can confirm that this item will only be compatible with operating system Windows XP and later systems." Well thank you Argos. Verry helpfull after already stating it works with Windows 2000!
    I have found a latency driver
    http://us.creative.com/support/downloads/download.asp?DriverLang=033&searchString=+P4S_PCDR V_US__0_00.exe&Image.x=26&Image.y=3
    This and WMP9 work with the player under Windows 2000, except that the track numbers are all -. I have found reports of this being a fault of WMP9. I then tried winamp, as it apparently works with the Sleek Photo.
    http://forums.winamp.com/showthread.php?s=9d604eed60033b9e5de774d3d597078d& threadid=238885&perpage=40&highlight=&pagenumber=3
    It will not show the player at all (even after reinstalling drivers and winamp).
    Can anyone help? I've no idea what to do next, and the player is currently a very expensi've paperweight.

    I don't think this is going to help but here's what I've experienced with winamp:
    I'm running xp/sp2. I was using winamp 5.2 and it would work with my zen touch and also with my iri'ver h0 (even though it would take a real long time detecting my iri'ver). Then I switched to winamp 5.24 and it wouldn't detect my iri'ver anymore, in fact, for some weird reason, winamp figured it was a cd dri've... Can't say if 5.24 worked with my zen touch since I didn't try it but it definitely didn't with my iri'ver. When I switched back to version 5.2 both players worked alright. Maybe somebody else knows if your problem could be a bug in the new version? There definitely is one with my iri'ver.

  • Zen sleek photo....how do you make folders and edit them on mp3player using windows mediaplayer

    well....that's really all I want to know!: is it possible to create folders and move files around on the sleek photo (windows media player 0 doesn't let you edit the player as far as I know!) I would really like to organize my songs....they all seem muddled up. I have nearly 6 gigs of music on it and when I go under "Artists", sometimes it doesn't show me all the albums. Many of the albums on my player don't even have a folder and all the songs can be found only going on to "all tracks".
    It's a bit frustrating....
    any ideas?
    thanx

    This seems to be happening a lot now... The same thing happened to me. Unfortunately, I had to get a new one, but to save you a phone call, I'll tell you what Zen told me to do.
    . take the batery out.
    2. while putting the batery back in, turn the Zen on. This will take you to recovery mode (make sure your batery is full...you can check this on Recovery Mode. If it isn't you should charge it if you can stil connect to the cimputer. If not follow the rest of the ste
    ps.
    3. Click on Format All. This will sadly delete all your files =(
    4. Click on Ceanup
    5. Click on Reboot. (If this doesn't work and you get the logo again, your Zen's probably broken and you may need to return it and get a new one... or at least that's what I had to do)
    Note: You can also try to just click Cleanup and Reboot and see if that works. If not follow the steps above or call Zen...
    Note: If you can connect to the computer and your batery is full, you may want to download a new dri've. Call Zen for more info.

  • Zen Sleek Photo on Windows 98

    My 20GB Zen Sleek Photo arri'ved today, but my computer won't let me run the installation disc. It keeps giving me a message saying that the Windows operating system on my computer is not supported by the product. Is there any way of getting around this? I would appreciate it if someone couple help, thanks.

    Hi ProvWolf,
    Unfortunately, as the system requirements (on the site and box) detail, this player requires WindowsXP (with SP or later) or Windows XP Professional x64 edition. Windows98SE is not supported.
    http://www.creative.com/products/pro...uct=4259&nav=3
    Cat

  • Zen Sleek Photo and Windows Vi

    I have previously posted regarding problems with Vista and the Zen Sleek Photo mp3 player. (The Zen software is not compatible and won?t install.) Vista has built-in drivers so that Vista will recognize the player, but this isn?t much help. (It just makes the player usable as a portable hard dri've, but not much else.)
    After exchanging emails with Creative several times, and after some further experimenting on my own, I have put together a procedure that will, in fact, do a full install of the Zen Sleek Photo on a machine running Vista.
    It is in the form of a 3 page Word document, and I don?t know the best way to make it available to anyone needing it. Anyone needing this document can email me directly, and I will send it to you as a Word doc.
    Dave McClay
    [email protected]

    I emailed you and got a message back saying your email is down.

  • Creative Zen Sleek Photo Firmware Download does not recognize my pla

    My Creative Zen Sleek Photo recently froze up. After restarting it, the "firmware problem" screen popped up. After reading up on it a bit, I decided to first clean, then reformat, and then reload the firmware. Everything went smoothly until I went to load the firmware back onto my Zen.
    For whatever reason a screen pops up that says that my device is not connected to the computer, when it, in fact, is. I have tried several things including uninstalling Windows Media Player and repeatedly cleaning and reformatting in hopes that it would recognize it.
    I have had no prior problems with the computer recognizing the device and I have loaded quite a bit of music onto it through this computer. Can anyone please help? Any more ideas? Anything will be helpful and appreciated. Thanks?

    HelloHave a look at this thread http://www.anythingbutipod.com/forum...ead.php?t=6328?I had a similar problem with a Zen Sleek Photo and I am sure that this was the thread I used to recover the player when a firmware upgrade failed. Regards?

  • Transfering music from Napster To Go to Creative Zen Sleek Photo probl

    Hello
    I have a Creative Zen Sleek Photo with Napster To Go. I have Windows XP home edition. I can rip a CD to the hard dri've
    of the computer and transfer music to the mp3 player, but I am receiving a message when trying to transfer music files
    from Napster To Go. The message is the mp3 player will need an update to the firmware to work with Napster To Go.
    The Zen Sleek Photo has the latest firmware. I had been able to transfer music from Napster To Go until recently.
    Napster support referred me to Creative support but the Sleek Photo is past the warranty. Any help would be appreciated.
    Thank you.
    Bridget Ferrazzano

    I had problems for the first month of my Napster membership (while I was still in the trial period). I nearly went elsewhere, but stayed with it. As soon as the trial period was over, everything worked perfectly. One suggestion is to use the same software for everything. Whether you use Creative media source, Napster's own software or media explorer or any of the others, stick with that one only. Do not give up and go to itunes. What a waste of money!?If you need to reload firmware or try another software, it's worth it.
    I also had some issues getting help. Napster said the problem was with Creative and Creative said the problem was with Napster. Don't give up. Can you get ripped songs in?

  • Zen Sleek Photo gets USB DEVICE NOT RECOGNI

    I have ZEN Sleek Photo which i use for about a week now.
    Today I connected the player to the computer and got
    "USB DEVICE NOT RECOGNIZED" window in Win XP
    and the Zen Photo froze.
    Disconnected it, reset it using a pin, then turn it on and it's "re-building library"
    It works good as a player but i can't connect it to the computer.
    Tried restarting the computer, restoring the windows to a previous day, connected to all possible USB ports nothing hel
    ps.
    Hope for an answer
    Thanks in advance,
    Danny
    UPDATE.... PROBLEM SOLVED.. LOOK BELOW.. FRED'S SUGGESTIONMessage Edited by dindia on 07-24-2006 2:49 AM

    fred38 wrote:
    Hi i had this problem too and the solution was amazingly simple. (I found it by searching on Google for ages!) Turn your pc off and then unplug it from the mains for approximately 30 mins. I know it sounds crazy but apparantly static electricity can cause problems with usb devices particularly if you have your device already plugged in to USB port-Windows forgets its there! After 30 mins plug your pc back in to the mains and voila! your Zen will be recognised again.
    2:44 AM : After 30 minutes of trying to fall asleep with no success turned on computer and connected the Zen... Didn't have much expectations, but IT WORKED! IT REALLY DID! WINDOWS FOUND THE DEVICE CORRECTLY AND EVERYTHING IS WORKING NOW!
    THANSKS FRED!
    Danny

  • Got My Zen Sleek Photo! Now... Creative Playcenter

    I have just got my Zen Sleek Photo this morning (yay! its really, really good by the way) replacing my broken original Jukebox Zen, the original Zen used Creative Playcenter, which I am used to and really like, this sleek uses Creative MediaSource which I don't like, is there any way in which the Sleek Photo, or Sleek if you have one of those, can connect with the Playcenter software?
    If this is not possible then could you possibly help with the fact all the music files are stored in folders like on windows explorer, when looking at it on creative media source, this makes it ultra extreme to organise in my opnion.
    If i havn't explained that very well, just say, and I'll give you some more details, as I'd really like some help with this, also ask me what you want about the Zen Photo if you want to know about it.

    I'm afraid that isn't possible, Playcenter is an old application and was replaced with MediaSource, Playcenter isn't compatible with newer players.
    I think what's happening here is that the interface you're seeing is different to the old ones, partly because MediaSource is new, but also (mainly) because the player is an MTP-compatible player, so it'll be a little different to the way the older players behaved.
    There should be another application included with that, Zen Media Explorer. You can also use Windows Media Player 0. Perhaps you could try those and see if you prefer them.
    Cat

  • Zen Sleek Photo Installation Wo

    Hey guys, I just bought a Creative Zen Sleek Photo MP3 player and i'm having trouble installing the driver. After plugging it in, windows detects the new hardware and goes thru the installation process the driver. At the end it tells me:
    "Cannot install this Hardware.
    There was a problem installing this hardware.
    MTP Device
    An error occured during the installation of the device.
    The required section was not found in the INF."
    There are only two INF files, one located in the root and one within Walmart/Files. I manually directed the installation wizard to both directories but the end result for both is the same. Nothing Happens.
    Just wondering if anyone has encountered a similar problem or if there is a fix around for this?
    Cheers
    (winxpsp2)

    Hello, I have had the same problem and had great help when I emailed creative.com. They recommended I uninstalled the software, disabled my broadband and disabled my spamkiller and security packages. Once I had done this I reinstalled and now my player was recognized immediately. This had never happened before. I now can download. Hope this helps Forgot to say also I had to make sure I had windows service pack 2.

  • Zen Sleek Photo - Can't reload firmw

    I acidentally erased the firmware on my Zen Sleek Photo and I've been having troubles re-loading it. I downloaded the only firmware available on Creative's site for the Zen Sleek Photo and tried to run it, but it keeps saying that my player is not connected. My player is in fact connected and I don't know why it's not picking it up. I know Microsoft Windows is picking it up because I get that pop up that asks what I want to do when a media device is connected. I am basically stuck in recovery mode now because I can't load the firmware. Does anyone know how to fix this?

    After hours of searching around the forums, I finally found the solution. I downloaded the hotfixes found here http://ask.americas.creative.com/SRVS/CGI-BIN/WEBCGI.EXE?New,Kb=ww_english_add,U={B8F6030-DA4F-D3-94F4-00500463020E},Company={CEAE26D-879-4C00-AC9F-03BC258F7B70},d=3025443648,VARSET=ws:http://us.creative.com,case=793
    They'll fix the problem even if you don't use an online music subscription.

  • Zen Sleek Photo won't boot

    I have just bought a used Zen Sleek photo and have been excited about getting it, but I was setting up some playlists in Windows media Player 0, I left the machine to sync and when I came back my Zen was off and now won't start up again. Is there a way to reset it or please please can anyone help with this, as I have so much stuff I want to listen to but the is now useless. I look forward to some words of wisdom. Thanks, HypnomanMessage Edited by Catherina-CL on 09-06-2007 2:3 PM

    Hi Hypnoman,
    The player does have a reset, you can press the button inside with a paperclip for instance. It should reboot (and reset) the player. Leave it charging for a while to make sure it has enough power to operate.
    When happens when you try to start up the player?
    On a seperate note, I have removed your signature, advertising is not allowed.
    Cat

  • Zen Sleek Photo - Product Key C

    I?have recently purchased a new computer.
    I have loaded 250 CD's on my Zen Sleek Photo from an old computer & want to transfer all the CD's to my new computer by the the Sync Manager. I was able?to load the software?on the new computer but it wont let me transfer from the mp3 player to the new computer without?putting in the product?key code, which i have lost. Can someone give me a key code that i can?use to make this work? thanks, Doug

    Hi ProvWolf,
    Unfortunately, as the system requirements (on the site and box) detail, this player requires WindowsXP (with SP or later) or Windows XP Professional x64 edition. Windows98SE is not supported.
    http://www.creative.com/products/pro...uct=4259&nav=3
    Cat

  • Creative Zen Sleek Photo

    I have Windows Vista on my PC and iTunes. I can't get the music on my Creasti've Zen Sleek photo. The original software just makes everything crash. Any help?

    muellerdav wrote:
    I have Windows Vista and I cannot load music onto my Creative Zen Sleek Photo. The Creative software stalls the PC and ultimately has to be shut down with the Windows task manager. Any answers?
    Like skb said you don't need the Creative software WMPwill sync to the device.

Maybe you are looking for

  • Is it possible to force links inside a custom widget to open in Safari instead of within the widget?

    I'm just starting to get into working with iBooks Author, so apologies in advance if this is a FAQ.  I've search the forum and the web but haven't been able to find an answer. I'm trying to link out to an external resource from within a custom widget

  • DYNPRO NOT FOUND - Runtime Error

    A run time error "DYNPRO_NOT_FOUND" occurred while the ABAP program "SAPLCV130" was terminated. Error Analysis reports that system attempted to use dynpro 1231 in program "SAPLCV130" where in the dynpro did not exist. Can you provide us the options a

  • Install problem - SAP Crystal Dashboard Design, departmental edition

    I download a departmental edition trial version and I tried install it. When finish a message said the installing was fine but then apears another message "Missing installdir reg key for installinverse, required for uninstall. Key: SOFTWARE\SAP Busin

  • Routing  a human task while invalid dynamic assignment

    hi, we hav a confusion while using route process in human task. In our case when an invalid user is dynamically assigned to BPEL ,an Alert is generated for the jcooper user .As we have set "overrride default exception management" for jcooper user in

  • Numbers set cell value

    Hi Guys, might be a weird question but here goes. am trying to create a formula that sets the values of other cells meaning: if A1 = 2 in B1 i will put: =IF(A1=2,C1=2,D1=0) which will check if cell A1 has the value of 2 and if so put the value 2 in c