Zen Touch: Is clean up supposed to reset touch pad settin

Whenever I do a clean-up, it resets the touch pad to "Clicker: On" and "Sensitivity: Medium." Is this normal? Could this be addressed Creative?

Yes, disk cleanup also does a general reset of the player to correct any odd behaviour. It's really an "as designed" and you should only use disk cleanup when you have problems.

Similar Messages

  • My current laptop is about 3 years old. Got a virus and had to wipe it clean. Now my IPod touch 2nd generation won't recognize this computer as the one it was originally assigned to.  what do I need to do to safeguard my tunes on the Ipod touch.

    My current laptop is about three years old and got a virus.  Had to wipe it clean.  Now my Ipod Touch-2nd generation is not recognizing it as the primary original computer and says it is registered on another computer.  What can I do to safeguard my library of songs on the Ipodtouch.  Any suggestions?

    Syncing to a new iTunes library or computer will erase your iPod. Only if you back up your iPod manually before syncing, you can restore your device from that backup again. A manual backup does not include the sync process.
    Do this:
    Disable autosync in iTunes, connect your iPod to your new computer and right click on it in the device list and choose backup. iTunes will backup your ipod without syncing.
    Transfer your purchases the same way, choosing "transfer purchases" this time.
    When you connect your device for the first time, all media content will be erased. But you can restore your settings and app data from your manual backup afterwards.
    Don't forget to set up at least one contact and event on your new computer to be able to merge calendars and contacts when you sync the iPod for the first time.
    Music is one way only, from the computer to your device, unless you bought the songs in itunes and transferred your purchases.
    There is 3rd party software out there, but not supported by Apple, see this thread:http://discussions.apple.com/thread.jspa?threadID=2013615&tstart=0
    About backups and what's saved:iTunes: About iOS backups
    How to back up and restore:http://support.apple.com/kb/HT1414
    How to download apps for free again:http://support.apple.com/kb/HT2519
    Saving other data is also described here. How to back up your data and set up as a new device

  • Touch screen doesn't work after resetting the phone. Could the screen be locked?

    After following the previous  touch screen not working message, I reset the phone but still doesn't work.  Could there be a screen lock?  Or any other way for the touch screen to work?

        Hi there Angelicness3011!
    The touch screen responding correctly is pretty important for you to even use your phone! I'm sorry to learn you've been having issues with it. Let's review some options together!
    You mentioned you reset the phone. Does this mean you removed the battery & put it back in? Or does this mean you able to complete an actual Hard Reset?
    Instructions on a Hard Reset can be found here: http://bit.ly/Q00sJ9
    Your information is generally backed up to Google or Backup Assistant and your SD Card. If possible, please sign in to double check.
    If you're unable to hard reset and removing the battery doesn't resolve the concerns we may have to look in to replacement. Does your phone have any physical or liquid damage? How long have you had your phone? Do you have insurance?
    I look forward to your responses!
    Melissa_VZW
    Please follow us on twitter @VZWSupport

  • I reset my ipod touch 5th generation and i just reset my apple id and password and it wont let me activate my ipod. I need help!!

    i reset my ipod touch 5th generation and i just reset my apple id and password and it wont let me activate my ipod. I need help!!

    What happens when you try? Error message?
    To activate you have to enter the ID and password last used for Settings>iCloud. In most cases the Apple ID is used for Settings>iCloud but not always.
    If problems contact iTunes
    Apple - Support - iTunes - Contact Us

  • I forgot my Ipod touch passcode .  How do I reset it?

    I forgot my Ipod touch passcode .  How do I reset it?

    You will have to restore your iPod in iTunes. You will also need to run it in Recovery Mode

  • Ipod touch screen not working even after resetting to factory specs

    ipod touch screen not working even after resetting to factory spec.  lock symbol appears at top

    That indicates you have a hardware problem. An appointment at the Genius Bar of an Apple store is in order.

  • My ipod touch isnt working I tried to reset it and the apple logo comes up but then goes to a black screen. What else can I do?

    My ippd touch isnt working i tried to reset it and the apple logo comes up then goes to a black screen. What else can I do?

    Try connecting to your PC in Recovery Mode ane restore it.  See this article for help on getting your iPod into Recovery Mode.
    iPhone and iPod touch: Unable to update or restore
    B-rock

  • HT5312 Ok So I did everything it told me but then when I went to the part where it asks you the security questions (Third picture) It didnt have send reset security info thingy! So how am I supposed to reset them now?

    Ok So I did everything it told me but then when I went to the part where it asks you the security questions (Third picture) It didnt have send reset security info thingy! So how am I supposed to reset them now?

    The email response is automated, and almost certainly is detected as "junk" or "spam". So, try again and check your spam folders for their reply.

  • HT201363 How Am I Suppose To Reset My Security Questions Of Im Not Receiving It In My Inbox

    How Am I Suppose To Reset My Security Questions Of Im Not Receiving It In My Inbox

    You need to ask Apple to reset your security questions; ways of contacting them include clicking here and picking a method for your country, and filling out and submitting this form.
    (96673)

  • My ipod touch locks up and when i reset it it will not come back on.

    my ipod touch locks up and when i reset it it will not come back on. when i plug it to my computer it wont come back on. it does this often and after a couple of days it will finally turn back on.

    Have you tried restoring the iPod via itunes on your computer? First restore from backup and if problem persists restore to factory defaults/new iPod.

  • Grandaughter has locked i pad 2 with passcode and then forgotten number how do you reset i pad to get it to work again

    grandaughter has locked i pad 2 with passcode and then forgotten number how do you reset i pad to get it to work again

    If You Are Locked Out Or Have Forgotten Your Passcode or Just Need to Restore Your Device
      1. iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
      2. iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
      3. iOS- Understanding passcodes
         If you have forgotten your Restrictions code, then follow the instructions
         below but DO NOT restore any previous backup. If you do then you will
         simply be restoring the old Restrictions code you have forgotten. This
         same warning applies if you need to restore a clean system.
    A Complete Guide to Restore or Recover Your iDevice (if You Forget Your Passcode)
    If you need to restore your device or ff you cannot remember the passcode, then you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and re-sync the data from the device (or restore from a backup). If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present. Refer to Updating and restoring iPhone, iPad and iPod touch software.
    Try restoring the iOS device if backing up and erasing all content and settings doesn't resolve the issue. Using iTunes to restore iOS devices is part of standard isolation troubleshooting. Restoring your device will delete all data and content, including songs, videos, contacts, photos, and calendar information, and will restore all settings to their factory condition.
    Before restoring your iOS device, Apple recommends that you either sync with iTunes to transfer any purchases you have made, or back up new data (data acquired after your last sync). If you have movie rentals on the device, see iTunes Store movie rental usage rights in the United States before restoring.
    Follow these steps to restore your device:
         1. Verify that you are using the latest version of iTunes before attempting to update.
         2. Connect your device to your computer.
         3. Select your iPhone, iPad, or iPod touch when it appears in iTunes under Devices.
         4. Select the Summary tab.
         5. Select the Restore option.
         6. When prompted to back up your settings before restoring, select the Back Up
             option (see in the image below). If you have just backed up the device, it is not
             necessary to create another.
         7. Select the Restore option when iTunes prompts you (as long as you've backed up,
             you should not have to worry about restoring your iOS device).
         8. When the restore process has completed, the device restarts and displays the Apple
             logo while starting up:
               After a restore, the iOS device displays the "Connect to iTunes" screen. For updating
              to iOS 5 or later, follow the steps in the iOS Setup Assistant. For earlier versions of
              iOS, keep your device connected until the "Connect to iTunes" screen goes away or
              you see "iPhone is activated."
         9. The final step is to restore your device from a previous backup. If you do not have a
              backup to restore, then restore as New.
    If you are restoring to fix a forgotten Restrictions Code or as a New device, then skip Step 9 and restore as New.

  • Clicking on Touch Tracks object won't re-open Touch Tracks window

    Hey Everyone,
    If I create a Touch Tracks object in the Environment, a new Touch Tracks window appears. If I close that window and then double-click on the newly created Touch Tracks object to re-open the Touch Tracks window (like the manual tells me to), the window will not re-open. I'm on day three of trying to figure this out. Double-clicking on all other objects in the "All Objects" layer of the Environment works (takes you to where the clicked object exists in a different layer or whatever is supposed to happen). But double-clicking on this specific object does nothing.
    Also, if double-clicking just won't work, does anyone know a different way to re-open the Touch Tracks window?
    Thanks!

    I have the same problem as well with an itouch that I purchased for my niece. The first one I bought, the apps never worked after I downloaded and some songs wouldn't play either. So last Monday I exchanged it and got a new one. The apps worked on this one along with the music until she unwrapped it Christmas morning (about 4 days). Now the app will flash up then quickly return to the home screen. I also received a touch for Christmas and put the apps on mine and so far am NOT having that problem, so I don't think it's a computer problem. I scheduled a support call with apple but it will be January 4th before they can get to me! If anyone can help, it would be greatly appreciated!

  • HT1923 i updated my ipod touch software and it made my ipod touch be restored. now my itunes does not sync my stuff and everything is backed up.

    i updated my ipod touch software and it made my ipod touch be restored

    Restore loop (being prompted to restore again after a restore successfully completes): This issue is typically caused by out-of-date or incorrectly configured third-party security software. Please followTroubleshooting security software issues if USB troubleshooting does not resolve this issue.
    Error 13 and 14: These errors are typically resolved by performing one or more of the steps listed below:
    Perform USB isolation troubleshooting, including trying a different USB port directly on the computer. See the advanced steps below for USB troubleshooting.
    Put a USB 2.0 hub between the device and the computer.
    Try a different USB 30-pin dock-connector cable.
    Eliminate third-party security software conflicts.
    There may be third-party software installed that modifies your default packet size in Windows by inserting one or more TcpWindowSize entries into your registry. Your default packet size being set incorrectly can cause this error. Contact the manufacturer of the software that installed the packet-size modification for assistance. Or, follow this article by Microsoft: How to reset Internet Protocol (TCP/IP) to reset the packet size back to the default for Windows.
    Connect your computer directly to your Internet source, bypassing any routers, hubs, or switches. You may need to restart your computer and modem to get online.
    Try to restore from another known-good computer and network.
    Error 50: This error (and error -50) are timeout errors. Follow the steps for errors 13 or 14 above.
    Above from:
    http://support.apple.com/kb/TS3694

  • Is there any shop in texas ,austin where we can replace an old ipod touch 3G and get a new ipod touch 4G ??

    Is there any shop in texas ,austin where we can replace an old ipod touch 3G and get a new ipod touch 4G ??
    pls help mee

    Sorry but I am pretty sure there isn't a shop which offers such a service.
    Apple stores offer a 14 day remorse period where you can return a purchase for a full refund without having to give a reason however this has probably expired - unless you bought from a different store with a similar system which you still happen to be within the time limit for.
    Your best bet would be to sell your iPod 3G and put the money towards a new one. If you are having trouble selling it an Apple store will take it and give you 10% off a new iPod.

  • Noise when I touch the area in front of the touch pad. How do I fix it?

    A weird sound is caused when I touch the area in front of the touch pad. How do I fix it?

    May be you should take the computer to the Apple store to have it checked.
    Best.

Maybe you are looking for

  • SAP report for movement type and material type

    Hi! I would like to use a standard SAP report to give me a list of all the movement types (much like MB51) but instead of material I would like to select on Material type e.g. ROH. The result should for example be a list of the movement types 501 on

  • Zen Micro Installation issu

    Ok, so I put the disk in and chose Full installation and stuff, but eventually when it gets to 39% is freezes and this error message comes up saying DoInstall fails to launch D:\CDRipwiz\Setup.inx DoInstall return error code is -2472332. Then I click

  • Wierd form issue

    I have a jsp (user.jsp) which has a link. The link points to another jsp (update_user.jsp) and has a query parameter coded into it. (like: http://localhost:8080/idm/update_user.jsp?id=01) The update_user.jsp has an embedded form (using requestState's

  • CAML query on SharePoint list not working after reaching threshold limit

    I have written CAML query to filter and get list items. It was working fine, but the List items count crossed 5000 and its around 15000 items. In Server Object Model When i execute my query to get list items throws exception as " The attempted operat

  • Select-option or parameter with display mode

    hai experts, i need to give select-option or parameter with display mode in selection-screen. my requirement is....... to give last print out time in selection screen with display mode mean user cant able to change the time...... reward avail for hop