Zen Touch, LCD Display not working at all, but player is f

So I'm on the bus, listening to my Zen Touch, it's working fine, the LCD is working fine. Everything is dandy. Few songs later, I pull it out of my pocket, the LCD is blank. But the player is still going. I can change songs, adjust volume, play all randomly etc etc, but I'm working blind, cause there is nothing on the display whatsoever.
It was a dry day, so it wasnt moisture damage or anything. And I didnt drop it, or bang it. It went from working fine, to going in my pocket, to not working. Really strange.
I'm sure its just defecti've, but I leave for a week long vacation in just under an hour (good timing eh? works fine for 8 months and then bam, 6 hours before I leave the country...ugh **bleep** karma), and I'm praying theres a simple fix I'm just missing. I already tried multiple restarts and resets, and I even charged it for a few hours, thinking the battery was just getting weak. But no dice. I doubt anyone can help me, but I figured it's worth at least a shot.Message Edited by myname on 0-24-2005 05:07 AM

If it won't display anything at all, even after a reset, it's likely there is a hardware problem. You could connect the player to the PC and update the firmware, but I suspect it'll be the same after that, unfortunately.
Cat

Similar Messages

  • My touch screen is not working at all and I've tried numerous times to turn it off and on but with no success to getting the touch screen to work again.  Any suggestions to get it back working?

    My touch scree will not work at all.  It just stopped one day and has not worked since.  I've tried numerous times to restart it but with no success at all.  The only tning I haven't tried is resetting it back to it's original setting when I bought it 2 years ago>  Any suggestions??

    When resetting the iPod to factory defaults/new iPod fails to resolve a problem, the problem is likely due to a a hardware problem. An appointment at the Genius Bar of an Apple store is then in order.

  • LCD display not working (blank screen)

    One day old 15" G4 (the latest model). No major changes to configuration; only basic software installed (Adium, Messenger, Firefox, Remote Desktop).
    The LCD display stopped working during normal operation (web browsing) and I assumed it was a power management issue (I was running on a low battery). I unplugged all devices, plugged it in and rebooted (per instruction manual); same issue.
    Since then, I've zapped the PRAM, booted with "R", reset the NVRAM, and reset the PMU. I also tried loading the setup CD with the "Option" to get the hardware check; this may have given me helpful data but I can't see the display so I'm not sure (read: display doesn't work even when booting from CD).
    External monitors work fine still. The Mac boots and everything loads perfectly. I can adjust the screen brightness on the LCD using the F1 and F2 keys; the display responds by varying the backlight but it is not rending the GUI; it remains black (or dark gray, really).
    I'm experienced with computers but this is my first time working on a Mac, so I'm completely unfamiliar with how to troubleshoot these things. Any help you can provide is greatly appreciated.

    Hi
    This is exactly what has happend to my PowerBook a few days ago. Its only just out of warranty too. Man I wish I bought Apple care!!!!!!
    PLEASE, PLEASE, PLEASE, could you tell me what it was? Was it the inverter? I'm miles away from an Apple store (yes I know I live in the UK and its a small island, but its still miles) and woulf like to try and resolve it myself.
    Works fine on an external LCD. Tried everything!
    May get my screwdriver out.
    Powerbook G4 1.5   Mac OS X (10.4.3)  

  • My touch screen will not work at all. I cant even turn it off, so i dont know what do to?

    My touch screen will not work.

    Hey ajnissly25,
    Thanks for the question. If I understand correctly, the touchscreen on the iPhone wont work. I would recommend that you read this article, it may be able to help you resolve or isolate the issue.
    iPhone, iPad, iPod touch: Troubleshooting touchscreen response
    If you can't restart your device, reset it by pressing and holding the Sleep/Wake button and the Home button at the same time for a least ten seconds, until the Apple logo appears.
    Thanks for using Apple Support Communities.
    Have a great day,
    Mario

  • Zen Touch in Vista- Not working, don't know what to

    I've looked around for over an hour and I still can't find a solution. I'm trying to install the software that my player came with onto a different computer that has Vista. I've read that there's a problem w/ that on Vista, but no where that tells me what exactly to do, or if there is anything to do at all. I read something about nati've drivers and firmware, but where would I even get that? I did go where you select your product, and then what type of system you have and look for firmware and applications. No firmware came up.. I have Vista 32 bit. Basically, I just want someone to tell me if I can use my Zen Touch in Vista right now or not. If I can, and there's something I have to do for it to work, what do I have to do?It seems like they would have a solution to it by now, especially since I paid about $300 for the mp3 player when I purchased it, and to find out it doesn't work in Vista would really piss me off. If anyone can help me out, I'd really appreciate it. Thanks.Message Edited by Tiffany3 on 09-2-200708:43 PM

    I got it working... I had to instal the original cd on the XP machine and Windows Media player 0 too. apparently it was WMP0 that did the trick, I don't know why. Anyhow the new firmware installed and it now works on MY VISTA machine. I installed the newest applications for Vista and it I have problems using the software.. so I just use the drag and drop feature with windows explorer instead of the Creative MS 5 software. Oh, and I DID watch my language. I purposely put in symbols to blank out what the word I meant to say was. :smileytongue:

  • 2510 Photosmart Color LCD display not working

    My 2510 Photosmart All In One Color LCD display screen has seemed to stop working and makes life difficult.  Any solutions?

    Hi
    This is exactly what has happend to my PowerBook a few days ago. Its only just out of warranty too. Man I wish I bought Apple care!!!!!!
    PLEASE, PLEASE, PLEASE, could you tell me what it was? Was it the inverter? I'm miles away from an Apple store (yes I know I live in the UK and its a small island, but its still miles) and woulf like to try and resolve it myself.
    Works fine on an external LCD. Tried everything!
    May get my screwdriver out.
    Powerbook G4 1.5   Mac OS X (10.4.3)  

  • T61 LCD Screen not working at all !!!

    Hi, i have :
    1 - Thinkpad T61 6460 EF7
    2 - Windows XP SP3
    3 - Intel Centrino Pro Duo 2Ghz
    4 - NVidia Quadro 140NVS
    5 - 2 GIG of RAM
    6 - Latest drivers and updates installed
    I was working and suddenly :
    1 - my screen started flashing red
    2 - and then Blue Screen
    3 - crash
    4 - i can see the screen working but it shows nothing
    what i did:
    1 - i bought an external screen to see what's going on
    2 - external screen works only in safe mode and not in the normal mode and the Thinkpad LCD Screen still not working
    3 - i checked the BIOS ans in display Thinkpad LCD is checked
    4 - i've done a R and R restore, the thinkpad LCD screen resrarted working
    but
    1- the screen seems blocked by sometimes
    2- after reinstalling the laptop in a way to continue working on it
    3 - in the end of the day red flash, blue screen and screen not working anymore
    so please, is there any software solution or do i have a hardware problem ?
    thank you in advance

    I was referring to PC-Doctor bootable CD...
    http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-56222
    As for Turbo Memory, I don't have enough experience with it to claim anything...but am tempted to point at the GPU as being the component most likely at fault...
    Good luck.
    Cheers,
    George
    In daily use: R60F, R500F, T61, T410
    Collecting dust: T60
    Enjoying retirement: A31p, T42p,
    Non-ThinkPads: Panasonic CF-31 & CF-52, HP 8760W
    Starting Thursday, 08/14/2014 I'll be away from the forums until further notice. Please do NOT send private messages since I won't be able to read them. Thank you.

  • The screen on my ipod touch 3rd generation will not respond to touch, it will not work at all.

    My ipod touch 3rd generation fell off of a chair, it worked ok fow a while then the bottom half of the screen would not work, now the entire screen is not working
    I'm not sure what to do.

    You can try the following to rule out a software probem:
    - Reset:
    Reset iPod touch:  Press and hold the On/Off Sleep/Wake button and the Home
    button at the same time for at least ten seconds, until the Apple logo appears.
    - Restore from backup
    - Restore to  factory defaults/new iPod
    If you still have the problem they yu very likely have a hardware problem and an appointment at the Genius Bar of an Apple store is in order.

  • External (thunderbolt) display not working at all when in clamshell mode

    I have a brand new macbook pro (2014).  With a thunderbolt display and external keyboard/mouse attached, I use the computer as a 'desktop' all the time (lid closed).  Always worked fine, until I upgraded to Yosemite.  Now, either the machine doesn't boot at all, OR (even more strangely), it takes many minutes to boot up, and the animation of fades and also the mouse cursor jump around extremely slowly--the interface is completely unusable and I have to open the display and manually force a shutdown by holding the power button down.  Without an external monitor attached, everything seems to work just fine.
    Has anyone else experienced this, and has anyone found a work around?
    Thank you,
    Frustrated with Apple's apparent software quality decline,
    Mark

    Ran Etrecheck and my results are:
    Problem description:
    Thunderbolt Display doesn’t come on after power up. Also my desktop picture gets changed after display is restored.
    EtreCheck version: 2.1.5 (108)
    Report generated December 31, 2014 at 10:08:41 AM CST
    Click the [Support] links for help with non-Apple products.
    Click the [Details] links for more information about that line.
    Click the [Adware] links for help removing adware.
    Hardware Information: ℹ️
      MacBook Pro (Retina, 15-inch, Early 2013) (Verified)
      MacBook Pro - model: MacBookPro10,1
      1 2.7 GHz Intel Core i7 CPU: 4-core
      16 GB RAM Not upgradeable
      BANK 0/DIMM0
      8 GB DDR3 1600 MHz ok
      BANK 1/DIMM0
      8 GB DDR3 1600 MHz ok
      Bluetooth: Good - Handoff/Airdrop2 supported
      Wireless:  en0: 802.11 a/b/g/n
    Video Information: ℹ️
      Intel HD Graphics 4000
      NVIDIA GeForce GT 650M - VRAM: 1024 MB
      Thunderbolt Display 2560 x 1440
    System Software: ℹ️
      OS X 10.10.1 (14B25) - Uptime: 0:6:14
    Disk Information: ℹ️
      APPLE SSD SD512E disk0 : (500.28 GB)
      EFI (disk0s1) <not mounted> : 210 MB
      Recovery HD (disk0s3) <not mounted>  [Recovery]: 650 MB
      Macintosh HD (disk2) / : 499.07 GB (357.63 GB free)
      Encrypted AES-XTS Unlocked
      Core Storage: disk0s2 499.42 GB Online
      ST1000LM024 HN-M101MBB disk1 : (1 TB)
      THERESA EXT (disk1s1) /Volumes/THERESA EXT : 190.04 GB (189.34 GB free)
      1TB External (disk1s2) /Volumes/1TB External : 810.17 GB (120.69 GB free)
    USB Information: ℹ️
      Apple Inc. FaceTime HD Camera (Built-in)
      Apple Inc. Apple Internal Keyboard / Trackpad
      Apple Inc. BRCM20702 Hub
      Apple Inc. Bluetooth USB Host Controller
      Apple Inc. MacBook Air SuperDrive
      C-Media Electronics Inc. BassJump Core
      Apple Inc. Apple Thunderbolt Display
      Apple Inc. FaceTime HD Camera (Display)
      Apple Inc. Display Audio
    Firewire Information: ℹ️
      LaCie Rugged FW/USB 800mbit - 800mbit max
      disk3s1 (disk3s1) <not mounted> : 32 KB
      320GB External (disk3s3) /Volumes/320GB External : 499.97 GB (88.33 GB free)
    Thunderbolt Information: ℹ️
      Apple Inc. thunderbolt_bus
      Apple Inc. Thunderbolt Display
      G-Technology G-RAID with Thunderbolt
      LaCie Rugged mini
    Gatekeeper: ℹ️
      Mac App Store and identified developers
    Kernel Extensions: ℹ️
      /System/Library/Extensions
      [loaded] com.Leawo.driver.AudioDevice (1.0.0d1 - SDK 10.2) [Support]
      [not loaded] com.palm.ClassicNotSeizeDriver (3.2.1) [Support]
      [not loaded] com.sierrawireless.driver.SierraDevSupport (2.0.4) [Support]
      [not loaded] com.sierrawireless.driver.SierraFSCSupport (2.0.4) [Support]
      [not loaded] com.sierrawireless.driver.SierraODSupport (2.0.5) [Support]
      [loaded] com.sierrawireless.driver.SierraSerial (1.0.1) [Support]
      [not loaded] com.sierrawireless.driver.SierraSupport (1.4.5) [Support]
      [not loaded] com.sierrawireless.driver.SierraSupportKicker (1.4.5) [Support]
      [not loaded] com.sierrawireless.driver.SierraSwitch (1.2.0) [Support]
      [not loaded] com.twelvesouth.driver.BassJumpOverrideDriver (2.5.1 - SDK 10.9) [Support]
    Launch Agents: ℹ️
      [running] com.flipvideo.FlipShare.AutoRun.plist [Support]
      [loaded] com.oracle.java.Java-Updater.plist [Support]
      [running] com.twelvesouth.bassjump.observer.plist [Support]
    Launch Daemons: ℹ️
      [loaded] com.adobe.fpsaud.plist [Support]
      [not loaded] com.gopro.stereomodestatus.plist [Support]
      [loaded] com.macpaw.CleanMyMac2.Agent.plist [Support]
      [loaded] com.microsoft.office.licensing.helper.plist [Support]
      [loaded] com.oracle.java.Helper-Tool.plist [Support]
      [loaded] com.oracle.java.JavaUpdateHelper.plist [Support]
      [not loaded] com.sierrawireless.SierraReset.plist [Support]
      [running] com.sierrawireless.SierraSerial.plist [Support]
      [running] com.sierrawireless.SWoCMon.plist [Support]
      [running] com.twelvesouth.bassjump.player.plist [Support]
    User Launch Agents: ℹ️
      [loaded] com.adobe.ARM.[...].plist [Support]
      [loaded] com.google.keystone.agent.plist [Support]
      [not loaded] com.macpaw.CleanMyMac.helperTool.plist [Support]
      [not loaded] com.macpaw.CleanMyMac.trashSizeWatcher.plist [Support]
      [loaded] com.macpaw.CleanMyMac2Helper.diskSpaceWatcher.plist [Support]
      [loaded] com.macpaw.CleanMyMac2Helper.scheduledScan.plist [Support]
      [loaded] com.macpaw.CleanMyMac2Helper.trashWatcher.plist [Support]
    User Login Items: ℹ️
      GrowlHelperApp Application (/Library/PreferencePanes/Growl.prefPane/Contents/Resources/GrowlHelperApp.app)
      Suitcase Fusion Application (/Applications/Extensis Suitcase Fusion/Suitcase Fusion.app)
      AdobeResourceSynchronizer ApplicationHidden (/Applications/Adobe Acrobat 8 Professional/Adobe Acrobat Professional.app/Contents/Support/AdobeResourceSynchronizer.app)
      Dropbox Application (/Applications/Dropbox.app)
      Google Drive Application (/Applications/Google Drive.app)
      AirPlayitServerManager Application (/Applications/AirPlayit.app/Contents/Resources/AirPlayitServerManager.app)
    Internet Plug-ins: ℹ️
      Google Earth Web Plug-in: Version: 6.0 [Support]
      Default Browser: Version: 600 - SDK 10.10
      Flip4Mac WMV Plugin: Version: 3.2.0.16   - SDK 10.8 [Support]
      RealPlayer Plugin: Version: Unknown [Support]
      Silverlight: Version: 5.1.30514.0 - SDK 10.6 [Support]
      FlashPlayer-10.6: Version: 16.0.0.235 - SDK 10.6 [Support]
      WidevineMediaOptimizer: Version: 6.0.0.12757 - SDK 10.7 [Support]
      Flash Player: Version: 16.0.0.235 - SDK 10.6 [Support]
      QuickTime Plugin: Version: 7.7.3
      iPhotoPhotocast: Version: 7.0
      SharePointBrowserPlugin: Version: 14.4.7 - SDK 10.6 [Support]
      AdobePDFViewer: Version: 10.1.0 [Support]
      JavaAppletPlugin: Version: Java 7 Update 71 Check version
    User internet Plug-ins: ℹ️
      BrowserPlus_2.9.8: Version: 2.9.8 [Support]
      fbplugin_1_0_3: Version: Unknown [Support]
    Safari Extensions: ℹ️
      Facebook Cleaner [Installed]
      F.B. Purity - Cleans Up Facebook [Installed]
      AVG Do Not Track [Installed]
    3rd Party Preference Panes: ℹ️
      3ivx MPEG-4  [Support]
      BrowserPlus  [Support]
      Flash Player  [Support]
      Flip4Mac WMV  [Support]
      GoPro  [Support]
      Growl  [Support]
      Java  [Support]
      Tuxera NTFS  [Support]
    Time Machine: ℹ️
      Skip System Files: NO
      Mobile backups: OFF
      Auto backup: YES
      Volumes being backed up:
      Macintosh HD: Disk size: 499.07 GB Disk used: 141.44 GB
      Destinations:
      Data [Network]
      Total size: 3.00 TB
      Total number of backups: 30
      Oldest backup: 2014-07-08 04:52:19 +0000
      Last backup: 2014-12-31 02:32:04 +0000
      Size of backup disk: Excellent
      Backup size 3.00 TB > (Disk size 499.07 GB X 3)
    Top Processes by CPU: ℹ️
          4% WindowServer
          0% fontd
          0% SystemUIServer
          0% AppleSpell
          0% Google Drive
    Top Processes by Memory: ℹ️
      309 MB mds_stores
      241 MB Dock
      206 MB com.apple.WebKit.WebContent
      103 MB Safari
      103 MB Google Drive
    Virtual Memory Information: ℹ️
      12.03 GB Free RAM
      2.51 GB Active RAM
      1.42 GB Inactive RAM
      1.22 GB Wired RAM
      2.03 GB Page-ins
      0 B Page-outs
    Diagnostics Information: ℹ️
      Dec 31, 2014, 10:03:01 AM Self test - passed
      Dec 30, 2014, 05:26:28 PM /Users/[redacted]/Library/Logs/DiagnosticReports/garcon_2014-12-30-172628_[reda cted].crash
    If there's anyone out there that can help please...
    I am running the latest firmware on the TBD and all software is up to date as you can see.

  • Imac Display not working at all

    I'm using the latest release of Leopard on my iMac that is less than a couple of months old and the display just went off, totally black and I cannot get it back on.
    I have tried:
    - Unplugging all peripherals and rebooting
    - Resetting the PRAM (http://docs.info.apple.com/article.html?artnum=2238)
    - Resetting the System Management Controller (http://docs.info.apple.com/article.html?artnum=303446)
    What is strange is that I left the machine running for a couple of hours and went back to it, waking it from sleep by touching the keyboard and the display actually came back on and I thought it was miraculously fixed. However, as soon as I touched the mouse the display went off again and I haven't been able to get it back.
    I can hear the machine when it boots and I know it's starting ok because I can hear the noises when I turn the volume up and down using the keyboard. Because the display did come back, although extremely briefly, I reckon it has to be a software problem.
    What's really frustrating is that I haven't got screen sharing turned on and I'm writing this from my MacBook which I could use to try to diagnose the problem.
    I have figured out all the keyboard commands I need to bring up the screen sharing dialogue but I don't know what the keyboard command is to tick a check box!
    Any help would be greatly appreciated.
    Paul.

    Luckily mine is still under warranty, but it is still away being repaired.
    Strangely I discovered that it would still run an external monitor (but i couldn't set it to be primary) so the problem can't be with the graphics card.
    This whole experience (combined with numerous separate issues I have had with Leopard) has certainly tainted my view of Apple.

  • LCD Display Not Working

        I have a T60, the bottum 1/3 of the screen suddenly is not displaying anything.  There are funky lines across the width of the screen but only come up about a third.  I haven't been able to find anything else wrong.  The screen is fine when in a docking station or projected.  Only the laptop's screen seems affected.

    bags4440, welcome to the forum,
    hopefully you have warranty, what you describe says to me that you have a defective display. Sorry
    Andy  ______________________________________
    Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
    Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
      Deutsche Community     Comunidad en Español    English Community Русскоязычное Сообщество
    PepperonI blog 

  • HT4528 My touch screen is not working at all.  I can't get into my phone at all.

    I can't access anything in my phone.  Using my bluetooth in the car I can answer/make phone calls.  But that is it.  I can't even turn my phone off. 

    Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new).  Try each of these in order until the issue is resolved.

  • Another spotlight not working at all

    I have tried all suggestions from the other post about spotlight not working at all but archive and install. Is there any other way to fix it besides that? What are other people doing to fix theirs?

    I have just fixed the same problem on my Powermac, i was not even getting a spinning wheel when trying to search. It is a bit more involved than an archive and install but much quicker, i wouldn't recomend it if you're not familiar with the contents of install packages a little bit. here's the steps:
    1. Download and open Pacifist from macupdate.com and after the countdown click not yet and open the install packages from your OSX DVD (there is a specific button for this function).
    2. Use the find tool to search for all spotlight files (just search for spotlight)
    3. The list of files includes all references to spotlight found on the install dvd including language packs and applications so only the top 22 item are needed. These are the files in the Base system and essensials packages. although if you just did a full install then there is no real harm in doing the language variations etc too..
    4. Select the files that you want to install from the search drawer and click the install button. You will need an admin password to complete this.
    5. I didn't need to restart but you may want to delete the preferences file at ~/library/preferences/c.apple.spotlight.plist, and repair the permissions before restarting anyway.
    Do be careful that your not writing over updated versions of mail or other applicaions that are in the packages, i would advise having a good look through the search results and only installing those components in the base system and essensials, these were the top 22 on my DVD.
    Obviously this is at your own risk but it worked perfectly for me. Good luck
    SEB
    iBook G4 12in (800mhz, 640MB, 40GB)   Mac OS X (10.4.3)   Powermac G4 (Dual G4 450mhz, 768 MB, 20GB, PCI USB 2.0)
    iBook G4 12in (800mhz, 640MB, 40GB)   Mac OS X (10.4.3)   Powermac G4 (Dual G4 450mhz, 768 MB, 20GB, PCI USB 2.0)

  • I have bought  three iPhone 6  one for me and one each for my two kids  we have just done the update iOS 8.01 now all phone  do not connect to service provider and touch id is not working ,  APPLE HELP !!!!

    i phones  updated iso 8.01 all three phones  will not connect to service provider and touch id
    will not work  APPLE HELP !!!!!!!!!
    anyone know  i fix as  i have spent over 2000 pound on three phones that won't work
    all three where working fine until the 8.01 update

    Apple just pulled the update because it is a major fubar! You will have to rollback your iPhone to the base iOS 8 using iTunes and Apple needs to seriously test its patches!
    Update:
    Simply connect your phone to iTunes and back up your data. Then, click the “Restore iPhone” button and follow the on-screen instructions. It’s a huge pain, but at least it’s better than having your shiny new iPhone turned into a big expensive iPod touch.

  • My ipod touch is not working at all pls HELP, my ipod touch is not working at all pls HELP

    My iPod touch is not working at all,i did everything i could and still it doesnt work,i live in the philippines my idea of solving this problem is to send it back at Apple California we do have service centre here but i dont trust them,i dont know what to do,I REALLY NEED YOUR HELP

    Quite possibly.  It wouldn't hurt to try another one if at all possible. If you have to, borrow one from a friend.  It could also be due to debris in the docking port of your iPod.  Take a look on the inside of the port and make sure there is no lint or anything like that.  Also look for broken pins as they would definitely cause connection issues as well.
    B-rock

Maybe you are looking for

  • Multiple choices in a SELECT list or a DECODE block?

    I know I have a lot of questions lately, but I am fairly new to Oracle. I have this query - it looks awful, but I just want to refer to the DECODE line. This line works, but I have more than one word that is valid. There are actually 3 or 4. Is there

  • IGMP Snooping IPTV SG200-08

    For having 3 settopboxes for iptv I have setup vlan 3 for iptv. IGMP snooping is enabled for vlan 3 with the default settings and port 5 (incoming iptv) is enabled as IGMP Mrouter. In the multicast forwarding table vlan 3 is set to filter unregistere

  • IDVD Won't Record Video In OneStep DVD

    I connected my Sony DV camera to my MacBook Pro using a FireWire cable, I switched the camera to VTR mode, I opened iDVD and clicked on OneStep DVD, I inserted a recordable DVD, it rewinds the tape for me and then says that it's capturing the video,

  • How to set isolation level for BMP

    Hi. We're trying to avoid the ORA-08177 by setting the isolation level in the weblogic-ejb-jar.xml to READ_COMMITED Still (looking in the jdbc.log) it seems that weblogic set the transaction isolation level to SERIALIZABLE The xml : <weblogic-enterpr

  • PLD. How to get information that not contain in document

    Hi, I need to get information of series number of some items previously sold to Customer. I have the CardCode of BP in Document and another ItemCode. Is it possible to get such  information (series number of other items) into Printing Layout? With re