Zen V Plus

Hi.
I've checked everywhere online and I just wanted to find out if the 8GB for the Zen V Plus will be sold in American stores before Christmas. Will it be sold in America at all?
Thanks.

I see that the 8GB Zen V Plus is offered on Creatives website as well as amazon.com, jr.com and a few other retailers. They didn't make the Christmas rush though

Similar Messages

  • Zen Stone Plus won't charge for more than 10 min

    When I charge my zen stone plus, withint 5-0 mins it will be full, as indicated by both Creative Mediasource lite as well a the blinking blue led.
    But once I turn on th eplayer i am shown with only 2 bars of battery and within 5 minutes of use I am down to one bar.
    What's going on?
    Resetting the player doesn't seem to work at all!
    I haven't even had a chance to properly use it at all >

    Me 2... I bought 2 Zen stone plus and the two wont charge for long too... I leave it for 4hrs and still the battery bar is only one bar full. Hai~~sad... And to make things worse, one of them the volume button is faulty. Anyway does anyone of u haf creative support hotline?

  • Bought Zen Micro to replace Zen Nano Plus - Can't get it to work

    HiSorry if this was answered somewhere, but maybe i'm just dense. Can't seem to get things going. I used to have a Zen Nano Plus which worked fine on my PC - Win XP SP2.Picked up a used Zen Micro - I thought that it would be better because of bookmarking - but I have yet to get it to work.Zen Micro says Version 2.20.05?Here is a list of what it says is loaded on my PC[Creative Product-PID][Installation Log]
    8 May 2006, Creative Zen Nano Plus Pack
    8 May 2006, Creative MediaSource Zen Nano Plugin .00.07
    8 May 2006, Zen Nano Plus Media Explorer 2.00.0
    8 May 2006, Creative Audio CD Ripper .60.0
    7 May 2006, Creative MediaSource Plugin for CD Burner 3.0.8
    7 May 2006, Creative MediaSource Player/Organizer 3.30.2
    7 May 2006, Common Audio Driver Interface .03.29
    3 May 2006, MediaSource AudioSync Plugin .0.03
    3 May 2006, MediaSource NOMAD Jukebox 2/3/Zen Plugin .0.03
    3 May 2006, Creative Music Store Plugin .00.09
    3 May 2006, Creative MediaSource Zen Nano Plugin .00.03
    3 May 2006, Creative MediaSource Player Skin Pack .0.06
    3 May 2006, MediaSource NOMAD MuVo Plugin .0.0
    3 May 2006, MediaSource CD-ROM Burner Component 3.0.
    3 May 2006, MediaSource Detector 3.00.7
    3 May 2006, Common Audio Driver Interface .03.
    3 May 2006, Creative MediaSource 3.20.57
    3 May 2006, Audio Device Selection .0.05
    3 May 2006, Creative System Information .0.3
    3 May 2006, Zen Nano Plus Media Explorer .0.03
    3 May 2006, Creative Audio CD Ripper .60.06
    Have tried to download drivers and software for Zen Micro. When I try to run it though, it does not install because it says that I do not have device connected. Have erased everything off of Zen Micro, but have not reformatted. When I attach Zen Micro to PC, Zen Micro displays "booted" & PC displays "Zen Micro" for a second or two, then switches to "MTP Device"?. Do I need to erase everything from the Zen Nano Plus first?2. What do you think my next step should be?Thx???

    Welcome to the Apple community.
    If you are referring to adding a secondary account, to a single device, then you can do this at system preferences >mail, contacts & calendars.

  • Zen v plus probl

    i've only had my zen v plus for a day and decided to charge it overnight. when i was listening to it this morning, after a song finished, it just turned off. i pressed the reset button multiple times but nothing happened. if i try to turn it on, nothing happens - i even tried to press other buttons and held them for more than 30 seconds.
    so far, nothing has been working.
    i even linked the player to my comp through the usb cable and the computer didn't even detect it - so i can't even update it firmware.
    has this happened to anyone else - if so, do you have a solution?
    thanks

    try this I found it on another website I had the same problem and it worked.
    To solve this, plug in your hardware and wait for the prompt to search for drivers.
    If no drivers are found, click on the "advanced" option of locating the drivers manually.
    If you dont get an option of browsing manually go to Control Panel > Device Manager and Find your hardware thats not installed. Right click on it and select Update Driver Software.
    You get asked to Browse your computer, or you can enter a file location. Simply place the following in, or find the folder on your computer
    C:\Windows\System32\DriverStore\FileRepository
    Click next and Windows searches that folder... and finds your drivers... installs them and sorts it all out.
    This has solved my problem with my Creative Zen V Plus MP3 player and some other hardwares which cannot be recognised."

  • ZEN V PLUS - Depleted Batte

    I bought a Creative Zen V Plus (pink version)?for my neice for her birthday on 7-2-2007. She only used it a few times and then it stopped working. Recently I was wondering why i haven't seen her using it so i asked her. She told me that it hasn't been working for a while. So i had her bring it o me to see what the problem is. I am a little familiar with the Creative MP3 players because i have the Zen M 30gb and i also purchased 2 more ZEN M 30gb for my brother and sister and also a Zen V Plus (black and green) for my nephew. So as you can tell i love the Creative brand. I am not sure what is wrong with my neice's Zen V Plus. When i try to turn it on it won't turn on. So i plug it into the computer using the USB cable that it came with. Here is what it does when i connect it to the computer.
    1. Blue leds lights up under the play button.
    2. Then the blue leds turns off and then turns back on.
    3. Then the led flashes again and then my computer detects the mp3 player and ask if i want to sync.
    4. I click No for syncing.
    5. Then the mp3 screen shows the battery on low with the red chunck on the battery. Then the red chunck turns green and then the battery starts to ncrease to /4 full then half full then 3/4 full then it shows the completely full battery icon/symbol ***All this happens within less than minute.***
    6. Then the blue leds turns off and the battery image on the screen disappears.
    7. The icon on my computer shows that the mp3 player has been disconnected.
    8. I push a button on the mp3 player to see if it is still on. When i do that the full battery icon appears along with the blue leds.
    9. I goto the side and turn the player on and then the screen turns on then goes to the docked icon.
    0. As i wait a little bit the screen turns off and then the blue leds turns on again and flashes (showing me that it's charging).
    . Then after a few seconds of blue led flashing, the leds turns off and stops flashing.
    2. I push scroll button again to see if it's still on, and it is.
    3. I then goto support page to update the firmware. I follow the processes as stated on?Creative site and completed the update successfully.
    4. The player restarts after firmware update, and computer lets you know that update is successful, but it still won't turn on.
    5. It does exact same thing as it did before. I repeat steps -2. Same things occur.
    6. When i unplug the USB from the mp3 player it turns off immediately. i press the play button with the USB connected to make the screen turn on and then unplugg the USB to see what would happen and it also shuts off immediately.
    7. I have also tired letting it stay connected to the USB over night and over the weekend with my computer staying on. Hoping that it might charge up?but still nothing.?I contacted Creative and they gave me a few things to try that i have already tried and still no luck. The last option in that list of things to try was to request a RMA (which basically consists of me paying $25.00 for them to diagnose the problem because i only have the 2months hardware manufactures warranty left) in which i am hesitant to pay for because it seems to be a commmon defect in the ZEN V and ZEN V Plus. I have been reading around and it seems like the problem?might be that?the battery might be on the verge of being dead or is completely depleted. I have read alot about people with similar symptoms with their players and it seems to be very common with the battery.?My neice probably only used it less than 5 times. And its been sitting in her room for months because she didn't know what to do with it because it stopped working. My little nephew's ZEN V Plus i acting up also. He says it's not working again. So I will be taking a look at it sometime this week too. I?tried being as detailed as possible so that u guys can better understand the situation. Hopefully someone knows a fix to this and help me fix it without having to cough up another $25.00 PLUS SHIPPING AND TAX to have then take a look. But i can't resolve the problem within the next week or so then i guess i will have to send it in.
    Message Edited by jack36 on -08-20072:42 AM

    reset it then cleanup>reboot theplayer http://forums.creative.com/creativel...ap&thread.id=3

  • Problem with my brand new mp3 player Zen Stone Plus 2GB ( with built in speaker )

    Hi .
    I have purchased the following Zen Stone Plus 2GB with built in speaker on 24.06.2008.
    From day one, it had a charging problem . Initial charging it'snever go beyond 87%.
    After using it for 2 days, at the time of recharging , I found my player won`t get dectected in my PC .
    I took the set to the vendor for a checkup . He tried to solve it by resetting , formating etc. But he could only able to to format it's sacrificing its 50% of its allocated space.
    My vendor then changed the set with a brand new one, againts that faulty one .
    Now the new one worked well for 3 - 4 days , but it is now totally dead .
    But the set did not give any indication before it become completely dead.
    A few dust particles inside the LCD screen was also observed. I can`t understand how come dust particles can enter inside
    a player which is sealed box pack .
    Next issue is with the battery which CREATIVE promised of giving a backup of approx 20 hrs of continious playback , which with minimal scuffling and with minimal settings lasted for 0 hrs approx ( 50% less than promised ).
    Another thing that i must state is the problem of FM Reception . It is simply terrible . In the same area where my mobile's FM reception is fine , Zen Stone's FM failed to give any reception .
    I came to know about Zen Stone Plus from of my friend , who is using Zen Stone Plus GB without any problem for long time.
    Pls tell me what to do now, since my player is compleately out of order now , and pls suggest me something regarding the issue of battery backup , FM reception ... etc.
    Now i am in a total mess . I just dont know what to do with the set that is few days old .
    Pls help urgently .
    Waiting for any valued suggestion .
    Bye ...

    Hi,
    I would suggest getting in touch with support, they might be able to help you with this.
    Go to the Support section of the website and select your product. On your right, click on Contact Us. You will be provided with a list of troubleshooting options. Click on the one closes to your issue. Go through the suggestions and if the does not work or you have already tried that, scroll to the bottom and click on No, escalate to email. This should bring you to the email form to contact support.

  • Battery Replacement Zen Stone Plus

    Li-Poly batteries last approximately 3 years after manufacturing (charged or not). So if your Zen Stone ceases to function and it has not been abused, it'ss likely a dead ? no longer can be charged - battery.
    I purchased a battery (actually 3 to meet their $ minimum) from allbattery.com? Polymer Li-Ion Battery 3.7V 240mAh. Order it with NO PCB option. $3.99 each plus shipping. After they arri'ved, I note the brand name is ?Tenergy. Original battery specs from Creative are 280mAh, a nominal difference. Specifications I didn?t have were charging requirements, but I?m happy to report they recharge seemingly identical from the Creative OEM batteries.
    <table cellspacing="0" cellpadding="0[/img]<tr><td>This battery replacement takes some skill and is, obviously at your own risk. Suggest examining ribbon cable prior to ordering batteries. My unit is a Zen Stone Plus with Speaker.
    </td></tr></table>?
    BATTERY REPLACEMENT:
    Run Exacto knife or small utility knife around sides and end NOT including end opposite display (or you will cut through a ribbon cable) penetrating no more than 0.075 (/6th inch) to split case of Zen Stone. It may be necessary to insert small jeweler?s screwdriver directly at corners to gently pry, releasing positioning studs. If you?re lucky, you won?t break off studs, but if you do, don?t worry they are mostly for alignment purposes.
    Lift off control pad (volume up down, fast forward, reverse, center select button) Remove two Phillips screws holding pc board to bottom case and lift edge of pc board with small screwdriver under USB port.
    Hinge pc board up with headphone jack on top and lift up battery with screwdriver.
    Examine ribbon cable, which is folded around control board and sandwiched between control board and pc mother board. If cable is torn (or cut) you?ll probably have to throw Zen Stone in trash as this cable may be impossible to repair.
    Remove white tape from top of battery and unsolder + and ? connectors
    Tint ribbon cables with solder (I used a little solder paste to get solder to stick), the solder in wires, paying attention to + and ? terminals. Be very careful not to touch the ribbon cables together or solder on a metal surface.
    Cut a piece of electrician tape and wrap around ribbon cables and soldering joints.
    You can test your Zen Stone prior to assembly.
    Reassemble in reverse order using a pin, tooth pick or small paper clip and clear silicone caulk around edges. Wrap elastics around unit holding upper and lower case together while caulk dries.
    <span style="font-family: "Times New Roman"; font-size: 2pt; mso-fareast-font-family: 'Times New Roman'; mso-ansi-language: EN-US; mso-fareast-language: EN-US; mso-bidi-language: AR-SA;">?
    <span style="font-family: "Times New Roman"; font-size: 2pt; mso-fareast-font-family: 'Times New Roman'; mso-ansi-language: EN-US; mso-fareast-language: EN-US; mso-bidi-language: AR-SA;">?
    <span style="font-family: "Times New Roman"; font-size: 2pt; mso-fareast-font-family: 'Times New Roman'; mso-ansi-language: EN-US; mso-fareast-language: EN-US; mso-bidi-language: AR-SA;">Sorry this board does not support pictures

    &Hi,
    Thanks for creating this guide. This forum does support pictures, click on Insert/edit image to insert an image. Take note that only urls are accepted so images have to be hosted on an external image hosting site like tinypic. Oh and welcome to the Creative Forums.

  • Zen Stone Plus 4GB - Hiccups / Skipping with new firmware 1.01

    I upgraded my recently purchased Zen Stone Plus 4GB to the new .0.05 firmware a few days ago. Ever since, most (if not all) tracks will play for ~ second, then skip back to the beginning and play fine thereafter. The problem will recur when the next track begins, either naturally on its own or if I jump tracks. I did not notice this problem with the prior firmware .0.03 (which had some EQ issues for me--EQ adjustments weren't audible while being performed, only after applied as a whole), but have not been able to downgrade back. More than once, I have tried reformatting (as FAT). I have reinstalled the .0.05 firmware (including in recovery mode). I have tried turning cue/review on and off. Nothing solves the hiccup / skipping?problem. Again, nothing will let me downgrade back to the older firmware, either. Has anyone else noticed this with the .0.05 firmware? I know several people have reported date bugs already (which I noticed too), so I'm hoping it's just Creative still getting firmware kinks ironed out. I'm a?little worried that it appears the player is no longer for sale anywhere, despite being a brand new "release." Most of my mp3's are a high quality variable bit rate, just in case that might be impacting something.

    Hi JLM, am running .0.05e fine and in fact listening to it at the moment. Is there anyway you can regress back to .0.03 to test your theory? Testing a bunch of 28k CBR MP3s is an easy thing to try also.Message Edited by BlueRobin on 0-02-200802:49 PM

  • Zen Stone Plus Charg

    Good day! I have a problem with my Creative Zen Stone Plus unit. The battery does not get a full charge and according to my Creative Media Lite, it's only 20% or so full. However, when I turn the player display on, it indicates that the charging is already complete (blinking blue LED and a plug sign instead of the lightning sign). In turning the product on, it reads that the player only has two bars? left and then turns to one bar after just 5 minutes of playback. This is crazy since I charge it as sson as the battery indicator reaches one bar. So obviously, it isn't charging. I've already installed the new firmware, resetting and formatting the player, and everything else that I could think of I've already tried them. Went through the messages in this site and all I can see are problems with their own players and no worthwhile solution from the Creative Tech team. I went on as much as to locally look for the service provider of Creative here in the Philippines but they all seem to know less than myself regarding the product.
    A side question and comment is if it would be better for my battery to run until there's no more bars in the indicator left (not necessarily drain it) or charge as soon as it hits one bar. The crazy thing is, I'm presumming with the hassle that it is producing, most probably the battery is not in its optimum condition anymore due to the trials that I have been doing to resolve this problem. The crazy thing is that the service provider I've been mentioning also told me that I can charge the player even when it is on, now reading the messages and from my stock knowledge I realized that what she did was irresponsible and utterly detrimental for my battery. This is such a sad condition considering that Creative is just building its name and they seem to be unable to provide a good customer support base for their clients.

    Not sure if this hel
    ps.
    .. I had a similar issue with my new Zen Stone.... Following it's first charge (+3 hours), I used?the player?until the battery went 'flat' and it turned itself off... I tried to charge the player up several times?without success - Creative Media Lite continually reported the battery as having 7% charge - but this never improved... Prior to me taking it back to the store I bought it from, I did a 'reset' (paperclip hole on the top side)... Low and behold - the player started to charge up again....

  • Zen Nano Plus WON'T START / RECOVERY / RES

    Hello ZNP friends and fellow victims of frustration,
    I have the GB Zen Nano Plus and a Windows XP operating system. My Zen is just over 3 months old, and a few days ago I started having the "stuck on Logo or hour glass (building library) problem". Like many of you, it has frustrated me beyond belief in my attempts to correct it. I'm certainly not a computer whiz, but I'm fairly good at following clear, numbered, valid instructions. I have tried many of the offered cures for this problem as provided in the discussion forum. None have worked for me.
    I have just stumbled onto/into the fix for the WON'T START / RECOVERY / RESCUE problem. At least, I hope it lasts. The bad news is that I don't know or remember the steps for the cure. The good news is that the problem can be fixed. In the frustration of trying a million variations on the steps offered in the discussion area, I happened to fix my nano plus. I was becoming like a hyper zealot playing a slot machine.
    What I do remember is this:
    ) I did download the application ZenNanoPlus_PCFW_LF___0 and install it, and put an icon on my desktop so I could activate it easily.
    2) I did double click it to call it up.
    3) I attached my nano plus via USB to the computer. I don't remember if I had to do that before or after bringing up the above application. (You may have to try both.)
    4) I did leave the battery out of the nano plus during this operation.
    5) I was required to reformat the nano plus which eliminated anything on it. When the instruction came on to reformat, it said "... area" so I was worried that the reformat might include more than the device itself but it didn't.
    6) Then I loaded a song, disconnected the device from the computer, put in a battery, and it started fine.
    What a task that whole process was! Of course I'm not telling you anything new. I was tempted to just get on with life, but then I thought I should really share this with those of you who have been in the trenches...to let you know that a cure is possible.
    Creative should really have a clear set of instructions by now for fixing this problem.
    Good luck!
    Buck

    Have you updated the firmware? this could be the major cause. Also, MP3 has far fewer kinks as a uni'versal format than WMA. If possible, I highly suggest using MP3 on MP3 players.

  • Zen V Plus won't cha

    My Zen V Plus battery won't charge. When I connect it with the USB cable to the computer to charge I get a message in Windows saying "USB Device Not Recongnize". Then when I look at my player the battery symbol cycles between showing the charging symbol and a depleted battery symbol (red with one bar). So what can I do anything to fix this or is my battery toast? I've had this for less than a year.

    It should charge without needing any drivers. It would be using the power connectors on the USB port for charging.
    Drivers are at?
    http://support.creative.com/Products/ProductDetails.aspx?catID=23&CatName=MP3+Players&s ubCatID=23&subCatName=ZEN&prodID=5306&prodName=ZEN +V+Plus

  • HELP! Brand New Zen Stone Plus WON'T TURN

    Just received the product today, downloaded and installed the latest software. Charged the unit for 3 hours and successfully loaded mp3 onto the player. Following every direction and clicked the "safely remove hardware" option. All ready to go... press the on/off button... NOTHING HAPPENED! No screen! LED light did not turn on! NOTHING!
    So went to Creative site and follow the "fix it myself" direction, reset the player did not work, formatting the player did not work. There is no firmware download available for Zen Stone Plus (only Zen Stone), so I could not try that option.
    I am starting to think there is a defect in my player. Do you guys have any suggestion on what I should do? Does any know how to contact Creative's US customer support (email address and/or phone numbers)? And please don't refer me to the 3 dollars to 30 mins support because I already spent money expecting to buy a non-defecti've product.
    I tried looking for the customer support number before posting this message. I did not know Creative have such a poor customer support system! I clicked the "email support" on its site and it directed me to some "fix the player yourself" page (I also tried those solution but did not help), and does not lead to any customer support number! HORRIBLE!Message Edited by misellu on 07-3-20070:6 PM
    ****** UPDATE*********
    Thanks for everyone's suggestions.
    Since I didn't want to spend more time to fuzz over a defecti've product, I returned my Zen Stone Plus to Amazon (I did this because I know sending it to Creative would take much longer time before I receive a replacement). Amazon sent me a new one in about 3 days at no charge (and free return shipping). The new one works fine now and does everything its suppose to do (so far...).
    Just like I wrote it when I posted the problem, I tried different time intervals and it still wouldn't turn on. I couldn't have lock the unit because it requires power on to turn on the lock (which I was unable to turn on the unit).
    The lesson I learn here is think about the product's customer support and where I am buying from before purchasing anything online. I would definitely think twice before buying Creative's products again.
    Message Edited by misellu on 08-05-200702:2 PM

    mine wont turn on after almost two weeks since i bought my player. i went to the store where i bought my player, asked them to replace my player right there and then (because i firmly believed that it was a factory defect) but to no avail. so i let the creative support checked my player and voila! my player was infected with WORM VIRUS!!! they fixed my player, deleted the virus and was all set after 2weeks. i scanned my computer, found A LOT OF WORM VIRUS, deleted them before connecting my player to this computer. after transferring files to my player & disconnecting it from this pc, it wont turn on again!! and i havent used it for at least 0mins since i got it back! darn!! i'm gonna return it again to the storea and ask for creative support's help again. does anybody know if there is an anti-virus available for zen products?

  • Zen Stone Plus won't turn

    Hi,I recieved a new zen stone plus for christmas and it told me to charge it for at least 3 hours.Well...it's been 2 days and I can't get it to respond or turn on. It responds when i plug it into the usb and it says it's charging, but the light never blinks. It just keeps charging.When i hit menu, it does nothing at all.Any ideas?

    One might want to read this thread..... right here..... http://forums.creative.com/creativelabs/board/message?board.id=dap&thread.id=2477
    You know, the one that is stickied.....
    More specifically, this part.......
    "Battery - Lithium-Ion Polymer
    #. Battery won't charge "out of the box" new player.
    A. First, read above "Getting Started"
    B. Next, try a different USB mini cable.
    C. Next, there is a battery manufactuer's failure rate < %, in which the Lithium-Ion Polymer battery refuses to charge.
    Creative, ships the Zen MP3 players with no charge so there is very small probability that? you could have one.
    I call it the "Deep Six Discharge Battery" Call / Contact Creative.
    #2. Battery won't charge properly after using the player for some time.
    A. When you plug in your player into the USB port via mini USB patch cable, the connection resets the player to the "docked screen" with the battery level gas guage , in the right hand corner.
    Sometimes this action does not reset the player properly but there is no indication to you that the player is charging.
    Just disconnect/connect the USB cable again.
    B. Sometimes, the Zen player gets confused and you have to do a Recovery Mode "paper clip reset" which forces the player into a "special menu screen" to clean-up the player and to reset the player which allows showing the "docked screen" while charging the unit. See Zen User's Guide for explicit instruction und FAQ.
    C. Since the Zens came out late in 2007, the maximum of 300-500 charge/discharge should not apply YET? but users beware, as with any other Lithium-Ion Polymer battery it will not charge fully "like new"? because of a " fixed shelf life" (2-3 yrs)?OR too many charge/discharge cycles. A battery replacement is in order."
    There is a reason why that thread is a sticky guys. You're supposed to read it.

  • The New Creative Zen Stone plus with built-in spea

    ?i was thinking of buying the the New Creative Zen Stone plus 2GB?with built-in speaker. http://creative.com/products/mp3/zenstoneplus/?The product detail info claim a 20 hours battery life of this product. . is?this a?true claim ?2. is there any problem about the charging process of this product?because the "previous" Creative?Stone Plus has a charging and?battery life problem. 3. Or should i just settle for the Creative muVo v00 2 GB instead ?Any thoughts guys?Thanks

    xmouse,
    Here you go:
    Firmware for Zen Stone Plus w/ Speaker
    You can find any other files you need by going to "Support" and then "Downloads" on this website.
    Good luck,
    Dale

  • 'Creative Zen V Plus' Recovery, from Creative Labs that

    Hi,
    I love my Creative mp3 player, but I haven't seen it for ages. The crappy joystick needed repairing (the only badly designed bit).
    I took it in to JB Hi-Fi for them to send off and they told me it would take 6-8 weeks (this was December 27).
    Anyway, to cut a long story short, 3 weeks have passed and I still don't have it.
    I've rung JB Hi-Fi constantly and the Storeperson tried to help me out, gave me the Creative Labs number and I phoned them.
    So I rang them and a (presumabley) Asian guy answers. I am not racist but **bleep**, he was hard to understand (phones should have inbuilt subtitles). He tried to help me out and to the best of my knowledge he said they were processing my product and it would take another 2 to 4 weeks to get my mp3 player back to me (on top of the 3 weeks!)
    Now you can propably see why I'm royally peeved.
    What I want to know is why Creative Labs have such crap service No joke, it sounded to me like they off-sourced people's queries to other countries and in the rinkiest dinkiest places possible (the audio quality was disqusting).
    Enough ranting from me.
    Anyone have a similar experience or know what I can do about it's (I'm definitely going to write a letter of complaint).
    Thanks all

    First, I got a? RMA number by e-mail and sent in my Zen V Plus 4GB?(refurbished) directly to Creative by UPS on a Thursday (3/28/08)?and they received it by the following Monday 3/3/08. It was back to me yesterday 4/07/08. Very fast service, only it wasn't fixed and it still locks up my computer and my player?when I download my audiobooks. Only way to get it running again is to reset, go to recovery mode?and then do a full format. Then, the next time I try to reload the books, it locks up again at GB. Now, I am trying to get Creative to pay for shipping both ways, because they didn't fix the player the first time.
    It probably would have much faster for you to have?delt with Creative directly instead of using the JB Hi Fi shop. At least yours is just a problem with the?joy stick and not the electronic parts.
    Good luck.
    luvmyrescuedogs

  • Creative Zen Nano Plus Media Explorer only works for administra

    Creative Zen Nano Plus Media Explorer only works for the administrator account; for other users the message "The Zen Nano Plus is not connected. Please connect your Zen Nano Plus to the computer." is displayed, but it *is* connected and works under other programs.
    Version is .0.03.
    Thanks for any assistance.
    Edit: System is XPMessage Edited by zigkill on 0--2006 06:23 AM

    RMskater wrote:I think you need to change the permissions to "Everyone".
    How exactly do you do this? I checked this out tonight - when I logged onto my PC using my son's Limited User account (XP Home, BTW) I could connect his N200 and see it in Device Manager and Windows Explorer but both Creative pieces of software (CMS and N200 Media Explorer) did not see that it was there!
    I tried setting the Run As... properties for the CTMS.exe file to run as one of the Admin user accounts but kept getting an error about being unable to find a specific file (which is in the Media Explorer folder!). When I went back to using the current user the error stopped. Perhaps I need to set the Run As.. options on that file as well?
    As we don't use DRM'd music this isn't going to be a problem but it would be good to find out the cause of this once and for all.
    I'm going to see if WMP0 has problems as well or if it's just the Creative ap
    ps.
    PB

Maybe you are looking for

  • How to update commitment in R/3 after SC being created

    Dear gurus, In my project, there is a requirement that whenever SC is created, a commitment should be updated into Fund Management in R/3. This is to make sure that the Fund Management should get the up-to-date information of all objects that are pla

  • Security Error in OBIEE

    Dear ALL , I have a question about security in OBIEE. I have given the security for BI publisher reports in OBIEE .I have given the read option for particular group to the BIP reports.These reports are showing fine for the weblogic user but same thin

  • Alert & Exception

    To Trigger deadline Monitoring and Exception Handling in BPM, whether it is necessary to have the ALERT to be Configured? We are in SP12 Thanks.

  • Join Windows PC with Mac Server domain

    Hello We are having a Mac OS X Server and few Microsoft PCs.  We want to join all PCs into domain of OS X Server. Windows is showing error after entering domain name : Active Directory Domain Controller could not be contacted.  Please let me know the

  • TDMS Low level file functions and Saving Front Panel image

    Am using TDMS low level file functions to save while also plotting data in my data acquisition programme.  However, I also want to programmatically be saving the front panel image on every run of my data acquisition.  I have coded all other aspects,