Zen Vision M (30Gb) will not turn

My Vision:M is 6 months old. I used it last 2 days ago. It won't turn on. I tried connecting it to my PC and tried recharging it - no response from the player. Any suggestions other than throwing it away?

What ubs port or you using? If it is one in the front use one in the rear. It may take some time( few hours) for it start charging if battery is REALLY dead. Or if you have a wall charger for it use that instead. Next option if battery has finally really died from just being worn out (they don't last forever) buy & install a new one? here's http://www.youtube.com/watch?v=akJDRpx6rA8 ? a how to open player (if not under warranty)? here's http://www.infinitybatteries.com/p-4...n-polymer.aspx where to get a new battery.

Similar Messages

Zen Vision M 30GB will not stay docked on Windows XP

For some reason my Zen won't stay docked into the computer so i can upload music and such to it. I can connect it..it'll actually charge but it won't change to the USB docked screen. It stays at my main screen and can cycle through my options and everything. Itried uninstalling and re-installing...i tried updating my MTP driver but that worked for a few seconds. And when it finally does dock. It'll actually stay there for a good...5 seconds and then exit as if it was disconnected from the USB plug. It doesn't even say "Updating".
I'd like to update the firmware on my Zen but it's .4.0. Not only does the MTP device have a yellow "!" but also SCSI/Raid Host Controller. Any idea why this is happening at all?

Like they say at the offset, this forum although was set up by Creative, they are not meant for official support or for direct support anyways. It is for peer-to-peer support which means it is more like customers helping other customers.
If you need the official support, you will need to either call them up or use the Support Tab or Contact Us tab to contact Tech Support directly.

ZEN Vision:M 30GB Battey not recharg

Has any one else?had any issues with the battery not recharging on the ZEN Vision:M 30GB. The battery Icon does even show that is?recharging. Any suggestions?I emailed Creative Lab support and they told me this below!?All ZEN MP3 players (except ZEN Nano and ZEN Plus) have a rechargeable
lithium-ion battery. You can charge your MP3 player by connecting it to
the power adapter (if included with your player), or by connecting it
to
a powered USB port on your PC.
When a MP3 player has not been used or charged over a long period of
time, it can take up to 60 minutes for the charging icon to appear when
it is being charged

Mine is doing that too... I had to send my other one in because it lost power and so they sent me this one, and I have a power adapter for the wall, which for as?long as I left in on there (4 hours) it should be showing some charge, but nothing.Right now, its?"charging" from my computer and I'm importing videos to it, so hopefully it shows something.

Mp3 player creative zen vision m 30gb doesn t turns on

Hi!! I'm an italian girl!! I got mp3 player some days ago and it doesn t turns on... It turns on only when it s charging with the adapter... Can anyone help me please???

Leave it charging for a while to make sure the battery has enough charge. Also try resetting the player and perhaps update (or reload) the firmware to see if that hel
ps.
If it still will not turn on then, it is possible there is a problem with your player. It would be best to contact Customer Support in that case (check the "Support" folder of the installation CD for contact details).
Cat

Zen Vision M 30G will not connect to

New at this, please bear with me.
My player worked just fine, unfortunately I don't have a car charger and after a long trip killed the battery. I return home, plug the player into my computer and nothing happens. I get frustrated, try everything, even going from USB port to USB port to get the thing to charge... nothing.
I leave it plugged in for a week and forget about it for?a few days. Well, it's charged, I'm happy about that, however I'm not very happy that it is not being recognized by my computer. Nope, no docking symbol, nothing. When I open the program it tells me the device is not connected. So again I try it in every port available and nothing. I do get a symbol within the battery symbol that sort of looks like a plug in, but no lightning bolt or dock symbol. (I guess it won't give me a lightning bolt if it's fully charged, right? (duh)).
I even uninstalled and installed the software on my computer thinking this is the problem, checked the USB ports through the control panel(...), I get nothing.
Anyone, please help. By the way, I am not a computer expert, nor am I an MP3 expert, I just want this thing to work so I don't have to go out and buy a new one. This one is only a year old and I only use it in my vehicle on long tri
ps.
(PLEH!? That's help backwards, this is a serious problem)

This has happened to me a few times with my vision m. First, is your firmware updated?
Driver Removal/Reinstallation
If this is not your first time plugging your ZVM into that computer, and it had worked before, then it is likely your system's driver cache has gotten corrupted. Windows has the occasional habit of "forgetting" things that it had recognized in the past. You will have to uninstall and reinstall the driver. To do this:
Plug your ZVM into the USB port, if it isn't already.<
Go to Windows' Device Manager by right-clicking on "My Computer" and selecting "Properties" (alternati'vely, if you are not running in "Start Menu Classic View" mode, then open your Control Panel from the Start Menu, select "Performance and Maintenance", and selecting "System"). From there, select the "Hardware" tab, and click "Device Manager".<
Locate the entry for "Creative Zen Vision:M" in the device list. It should be located under "Portable Devices".<
Right-click the "Creative Zen Vision:M" entry, and select "Uninstall".<
When the entry disappears, unplug your player, and wait several seconds.<
Plug your player back in. The "Found New Hardware" wizard should come up. Allow it to locate and install the driver automatically.<
Windows Media Player on Windows XP
If you are running Windows XP and have updated your Windows Media Player to WMP from WMP0, and you start encountering connectivity issues, you may have a conflict between WMP and your Creative software. There are three possible solutions for this:
Download and install the update patch for Creative Media Explorer, which can be found on the appropriate download page on Creative's website. This makes the Creative software compatible with WMP's MTP driver.<
Completely uninstall all Creative software and use WMP instead. If the problem persists, reinstall WMP.<
Roll-back WMP back to WMP0.<
Docked, but Not Recognized
If your player is showing all the signs of being docked, but your computer isn't seeing it, then try performing a Disk Cleanup from the ZVM's Recovery Mode menu. As a last resort when nothing else has worked, you may need to reformat your ZVM - also from Recovery Mode. Note that you will lose all of your media files when you reformat.
you might want to check out http://www.anythingbutipod.com/forum/showthread.php?t=0960 for more info about this. I wish i bookmark the thread that i have on the creative forum about this same exact problem. search it up if u can.

Ipod Video 30GB - Will not turn on!

I see a few similar posts, but I can't find one that has a resolution.
My ipod was working fine a week ago. I put some new songs on, did the latest update then turned it off and put it way.
I go to turn it on today, and nothing. I went throught the support suggests. It won't restart, it won't connect to my computer (yes I've tired different USB ports). And of course it's past the 1 year warranty so when I called apple support they basically ditched me and told me to read up online.
HELP!

I think it was a week ago that I updated. No mods on my iPod.
I've been on the phone with a bunch of apple reps. They're all saying it's not software, that it's a hardware issues, specifically the battery. My iPods in great condition, and I don't use it nearly enough for the battery to have a problem.
I don't know. At this rate I'm probably going to have to send it in and pay the $80 for the battery to be replaced. Then if it still doesn't work I'll have proof it's not hardware.

Creative zen vision:m will not turn

ok. so i got the creative zen vision:m mp3 player for Christmas and has been working just great until now. i plugged it into my charging accessory (http://creative.com/products/product.asp?category=3&subcategory=57&product=5050 ) yesterday and today i unplugged it and now it will not turn on. it was low on battery so i plugged it in...is that a reason for it to die
!!! i've tried the power and reset switches multiple times, as well as the combination for the maintenance menu. it still doesn't turn on. if i plug it into either the regular mp3 player to computer or mp3 player to wall power adapter all that happens is that the power led on the top blinks every few seconds. the display doesn't turn on or display that it's "charging" and when i plug it into the computer it doesn't recognize it. why isn't it working

I had same problem with my 30gb ZVM.
I had run down the battery a lot, but not to the point of the unit actually shutting itself down. So I?plugged into PC for hours;?charging icon?blinking away as usual. Thought everything OK until I disconnected and?would not turn on. The power on blue light by the switch would only flash briefly and then . . nothing. However - I then went into recovery mode - no problem - by hitting reset button as per instructions. Could see the battery icon showing no charge. Since that seemed to rejuvinate it I then exited?that mode and tried charging again. This time it took a charge and several hours later showed full battery charge. But then I made the biggest mistake ever - decided to update the firmware because of the charging problem. So I followed directions EXACTLY - downloaded new Firmware file onto PC first so it was ready to go, and then made the fatal mistake of going into Recovery mode and selecting the Update Firmware option - all as per instructions on-line and in user guide. The ZVM then immediately erased current version in player, and then said "ready for firmware update".
So I assumed - since no further instructions were given - that I had to connect unit back to PC and run the downloaded firmware file. When I did though the ZVM was no longer recognized by the software - kept telling me that no unit was connected. Unit showed in Device Manager, but not seen by WIndows Media or Creative Media Explorer. This then started the wasting of 2 days (so far) of my life trying to get firmware re-installed. Unit is now totally DOA because it has no firmware installed, and the Creative software on my PC will not update the firmware because it does not recognize a player which has no firmware installed. What were they thinking? See my post on this problem from earlier today.
From several calls into customer "service" I was told that I could have updated firmware just by running the downloaded file when the ZVM was normally connected - did not have to go into Recovery mode. That's nice to know now, and would have been critical to know 2 days ago - but why did the documentation say absolutely nothing about that? It only said this could be done through Recovery. Now I understand why so many posts about Creative are from totally frustrated users wasting their li'ves fighting with awful software and bad documentation. Great player - terrible documentation - awful software.
So my advice to you is:>?try hooking up to you PC and see if unit charges that way, instead of through charger.2> If no luck - go into Recovery mode by hitting reset button as?per?instructions. If you can get there,?select Reboot and then shut off. Hook up to charger again and see what happens.3> If still no luck - sounds like unit is still under warranty. Call Customer Service (405) 742-6622 and ask that they send UPS Call Tag to pick up unit from you to be sent back for repair. I am guessing that this player does not like to have the battery heavily discharged, somehow related?to?asoftware issue as well (surprise surpirse).
Will probably be fixed in future firmware update. Good Luck

Can not turn on my Zen Vision M 30gb pla

Hi, Sorry to bother you guys, but my Zen Vision M 30gb player can not be turned on. When I was listening to the music, it suddenly freezing. I can not turn it off or reset it. After a while it is off automatically and can not be turned on anymore and reset also doesn't work. When I connect it to the pc. nothing really happen except the swith keeps flashing, and the pc also doesn't recognize it. Did anybody have the same experience or same problem I really appreciate it if you can help me with it. Thanks! Ning

Sounds like you need to replace the battery here's the info to open the player for that? http://www.youtube.com/watch?v=akJDRpx6rA8? Here's a link to get a battery for the player? http://www.infinitybatteries.com/p-4...n-polymer.aspx

Zen Vision:M 30Gb not connected (!) and I'm becoming crazy

:Zen Vision:M 30Gb not connected (!) and I'm becoming crazyl Hi,
I tried for week to do something with the Vision 30Gigs of my son, and I don't no what to do now, maybe open the window and throw the zen..
No, seriously, he still remains in not connected and in Control Panel, system, device manager, always with the yellow sign blinking and tells that no driver is loaded.
I'm in XP SP3, removed WinMediaPlayer to install the WMP 9 because the 0 is not compatible with SP3 I think,
The zen is automatically in Recovery mode when boot, because I have tried all the possible and I have erased the firmware by "reload firmware" but without being connected to the computer,
I tried the recovery tool, but not connected...
So, I'm sure that some guru has the solution, and I'm convinced that this zen is not dead!
Thanks in advance for your precious help.
Ray

Read everything before you start.
Rayray wrote:
Hi,
I tried for week to do something with the Vision 30Gigs of my son, and I don't no what to do now, maybe open the window and throw the zen..
No, seriously, he still remains in not connected and in Control Panel, system, device manager, always with the yellow sign blinking and tells that no driver is loaded.
I'm in XP SP3, removed WinMediaPlayer to install the WMP 9 because the 0 is not compatible with SP3 I think,
The zen is automatically in Recovery mode when boot, because I have tried all the possible and I have erased the firmware by "reload firmware" but without being connected to the computer,
I tried the recovery tool, but not connected...
So, I'm sure that some guru has the solution, and I'm convinced that this zen is not dead!
Thanks in advance for your precious help.
Ray
You're right the Zen is not dead. It needs a firmware to work & it doesn't need to be connected to the computer to erase it. It does however need to be connected to a computer to reload it. First you will need to install WMP0. http://www.filehippo.com/download_wi...edia_player/9/
You then need to charge the battery When its charged & turned back on you will choose Format>Cleanup. You then connect player to see that Windows can see the device. Once you can see that it is recognized in Device Manager you will Disconnect it from the computer (use rear usb ports)
You will need to download the firmware file for the player to the desktop & open the file.(do this before you connect the player again)http://support.creative.com/Products...me=MP3+PlayersOn the player before you connect it to the computer that has the firmware file open & ready to go you will choose Reload firmware connect the player to the computer(use rear usb port) choose your language & let it run. (the autoplay window may open DO NOT CLOSE IT)
The reason it did not work before with WMP9 is that the driver is a part of WMP0.

30GB ipod will not turn off

Everything seems to be working fine, music, videos, connection to itunes, and no sudden trauma has happened to the ipod. It just will not turn off and I am wondering if there is another way besides holding the pause/play button. Should I reset all settings? Any help would be appreciated.
Thanks

Try holding the MENU and SELECT (center) buttons until you see the Apple logo to reset your iPod - then see if it'll turn off.
Cheers!
-Bryan

Zen Vision M 30gb Prob

I have a relati'vely new Zen Vision M 30gb player, which as of today stopped working.
It will not turn on, will not charge or interface with the computer. When plugged into the computer a blue light flashes at the top of the player, and the same occurs when attempting to turn on. I have tried recovery mode to no avail and the resets do naught.
Can anyone help me with this problem?

No helping me. I just got mine about 5 weeks ago and its been working great. I charged it overnight last night to take to the gym and it didn't work. So I though that maybe the outlet I charged it on was popped or something. I verified that it worked. I plugged it in again and I have the blue light, but I just chekced and the battery meter barely had a line, and that was after 7 hours. I unplugged it and it wouldn't turn on. Any idea. I am currently charging it now and there is a blue light again. It just doesn;t seem to hold a charge

Zen Vision:M 30GB recognition problems...Big t

Hi, 2 days ago i ran into a problem with my Zen. I had to charge it, as the battery was low and had to put some new music on it.. I plugged it into the USB port on my Laptop, where all of it's software is installed. The Zen wasn't recognized. Instead of the charging screen it normally started up with, it started up with the play screen(the screen it shows when a song is playing). I looked at the battery icon in the top right corner, and it wasn't doing anything. I turned the Zen off and started it up again. Nothing changed. I restarted my computer. Nothing changed. I shut down my computer and started it back up again. Nothing changed.
I took it to my desktop computer, a Compaq, and tried it there. It worked, but not how i was expecting it to work. The battery icon started flashing with the little lightning bolt, acknowledging that it was charging. But the play screen was still there. The odd thing with this is, i left the player to charge for several hours. When i came back, the Zen was in some form of idle shut-down. The screen was black, except for the battery icon with the lightning bolt. Oddly enough, he battery bar hadn't filled up anymore than when i left it. Upon unplugging the player though, the Zen turned off. When i turned it back on, the bar had filled up more. It wasn't fully charged though.
I plugged the cable back into it, and this time, the battery icon WASN'T charging. It just had the play screen on. It wasn't doing ANYTHING this time. Frustrated, i went out and bought the wall charger, and now i have a full battery. But it doesn't solve why my computer won't recognize my player.
Today, i un-installed the software that came with the player and re-installed it. It didn't do anything. I installed the software on my desktop computer, and THAT didn't work either. So i came to the website here and used the trouble-shoot guide. That didn't help, and this is where my problem differs from the other posters here who have recognition problems:
Back to my laptop: I have Windows Service Pack 2. I installed Windows Media Player . I went to the Device Manger, like the trouble-shoot guide said to. The kicker: Windows Portable Devices is NOT, i repeat NOT in my Device Manager. Neither does the Creative player either. I clicked on "The player does not appear in Device manager". That link showed me a diagram of a desktop computer, so went back to my desktop computer. I did everything above mentioned, and Windows Portable Devices is not in the device manager of my desktop computer either. Further reading the trouble-shoot guide, i could NOT locate "Other Devices" or "Unknown Devices" in my Device Manger on either desktop or laptop. There's nothing "Creative" related or "Zen" related at all in any of the Device programs.
I don't know what to do. All of the trouble-shoot guides don't discuss my issue at all. Everything is "If an MP3 player is reported working properly in Device Manager, but it is not detected or listed in Windows Media Player or Creative Media Explorer..."
Mine isn't even detected in Device Manager. My Device Manager has nothing regarding my Zen or Windows Portable Devices.
I'm thinking about messing with it in Recovery mode, but i don't want to erase everything i have on here, just to have my player still not work. I'm going to try messing with this at my friend's house to check the cable and the player there too.
But any help regarding my situation would be greatly appreciated. This is driving me crazy.

I tried my uncle's Zen Vision: M 30GB on my laptop and strange things happened. My laptop recognized the player as an unknown device and said i needed to install the MTP driver. I did that, and upon doing so, my laptop recognized my Uncle's player as a Portable device, allowing me to transfer songs to his player. But it STILL doesn't recognize MY player. Email support says i have to send it in for repairs, but i don't know...
Any luck with you?

Creative Zen Vision M 30gb and Vista.

Is there a way to get a Creative Zen Vision M 30gb to work on a Vista computer? It will save me buying my son a new MP3 player. Thanks.

I've been in touch with Creative support for over a week now but so far without success. Every time I download links they suggest I still can't access Creative Media Explorer, I just keep getting this error message:-
"The Creative Media Explorer that is compatible with this device is not installed. Please reinstall the application and try again"
This has included deleting all previously installed Crteati've files as well as downloading in a 'Clean Boot'. I've also rebooted my Zen Vision M.
At this rate I'll have to bin the Zen and look at an ipod:manmad:

Creative zen : vision M 30gb strange problem

,Creative zen : vision M 30gb strange problem. Hi people,
My mp3 player is 2 and a half years old. A few months ago he didn't charge anymore. ?I thought i could repair it by buying a new battery and install him in my mp3.
Afther a few ours of ?assembling it was ready for charging a thought..
I used the usb charger and de sync adapter...
the morning after, my mp3 is not charged and only showing me a little red stripe in de battery (right top) i can listen music but only for a few minutes...
Also my PC does noet see my MP3
tested on :
windows xp service pack 3?
vista?
windows 7?
please help me
Stijn van Vilsteren?
DUTCH?
i am sorry for my pore english !

Squipy wrote:
Hi, I stopped using this MP3 for about 2 or so years because I bought a new one. I decided to start using it again and downloaded all the required software but as soon as I unplugged the MP3 from the power outlet, the player died. I can't get it to start up without plugging it into a power outlet. I think it has rechargable battery? Why didn't it recharge itself?
My second enquiry is about the capacity of the player. When my player was empty, I went into "Information" and it said Total Space: 28GB and Free Space: 2GB. Why is free space only 2GB? Shouldn't it be 28 as well?
Thanks in advance!
The battery will only last about 3yrs regardless of use.You will need to change it. Did you scroll down to see the album,picture,track counts? Did you partition part of the dri've for removable storage. You can find instructions to open here ? http://www.youtube.com/watch?v=_Drkr...e=channel_page & ? the battery here(very easy to do) http://cgi.ebay.com/Original-Creative-ZEN-Vision-M-30gb-Battery-LPCS285385_W0QQitemZ400028645679QQcmdZViewItemQQpt ZOther_MP3_Player_Accessories?hash=item40002864567 9&_trksid=p39.c0.m4&_trkparms=72%3A205|66%3A4|65%3 A2|39%3A|240%3A38|30%3A0|293%3A|294%3A200

Zen Vision M 30GB is stuck in Recovery Mode

Hi, I have a Zen Vision M 30GB that is stuck in Recovery Mode. I have tried ' Cleaning ', ' Formatting ' and ' Reload Firmware ' but none of my 3 computers in which it was previously used recognise the device. The computers have Win Xp Home, Win xP Pro and Win 7 Pro, 64-bit. I could get it to connect once to my Win 7 and I set the firmware down to .4 ( I think), as I have read that latest Firmware .20 does not recognise some of the new batteries with 400 mAh and 700mAh batteries. I have tried the MP3 Recovery Tool, Creative Wizard tool but none work. Would appreciate any suggestion. I have read extensi'vely the postings about Zen Vision M in the ABIT (anythingbutipod) Forums, but no luck in re-loading the firmware. TIA, MPM

I had installed .4. and in the Recovery Mode, it dispalys v0.0.6. I have Creative Zen Vision M Media Explorer installed in both, my Xp Home desktop and Xp Pro ( not 64-bit) in my laptop. I will check which version of WMP is installed in my Xp systems.
On many occasions, all 3 computers (including Win & Pro 64-bit) signalled ' Un-recognised USB Device many times but now nothing happens and I can operate the touch pad of the Zen even when it is connected to the computers !!

Zen Vision M (30Gb) will not turn

Similar Messages

Maybe you are looking for