Zyxel modem doesn't work

How to install ZyXel Omni 56k Plus using USB?

It says on the spec for this zyxel 56k usb modem that the Mac is supported however they only have OS9 drivers.
VKOR:
Why not use the apple usb 56k modem which is designed for OS X.

Similar Messages

Yoga 2 1051L Win 8.1 - 3G modem doesn't work on Vodafone

I've bought a Yoga Tablet 2 1051L Windows 8.1 and I found out that the 3G modem doesn't work with the Vodafone Sim card, I've tried with Telekom Sim Card and it works, so the probably it's a compatibility issue since I've changed the Sim card from Vodafone with a new one and no luck, I've tried it in another very cheap tablet and it works just fine.I've also instaled the newest drivers, only the bios driver I didn't had the courage to install it.
I've read on the reviews from amazon.de and it seems that i'm not the only one. Does anyone know how to solve this problem? Thanks in advance!

This is a known problem and no solution yet, you can reflash the modem and gain a basic functionality with a vodafone ro sim, but only on hsdpa speed wich is crap for a 4G sim, i keept searching for a solution for a month now and no succes, i'm from ROU too, and support for us from lenovo is non existent as it seems.

After the OS X Lion installation, my USB modem doesn't work. I already updated the USB drivers, but nothing happened. Any suggestion?

After the OS X Lion installation, my USB modem doesn't work. I already updated the USB drivers, but nothing happened. Any suggestion?

You might want to do a search here on the forums re. usb modems - I've seen several threads and the opinion appears to be that faxing is no longer supported (especially since the "Fax" is now missing from the Print Preference Pane in System Preferences). I am faxing with an all-in-one printer which is connected to a landline, but I have to use the printer's control panel - can't use it from the iMac.

Tecra M1 - Modem doesn't work (can't open a port)

I have a problem: After reinstalling WinXP and drivers on my Tecra M1, modem doesn't function. It even can't diagnose itself - there always comes a warning: "Can't open a port (COM). It may be used by another device or application". I installed the latest Toshiba drivers for the modem, but nothing changes. How can I fix it? Looking forward for your advices!
Best regards.

Hi
Did you install the drivers in the right order? Not? So do it!
Did you install any additional devices or software which could has a bad influence on the modem?
Check the modem status in the device manger. Can you see any yellow exclamation marks?
Try to start the modem test within the Operating system.
Check the Modem function under
Start -> Control Panel -> Phone and Modem Options -> Modems Tab -> Properties -> Diagnostics
by pressing the "Query Modem" button.
If the Modem Information window contain a list of AT commands (including ATI2, ATI3, ATI4 etc.), then the modem is correctly installed. The ATI5 command ends in with the number for the selected Regional settings (for example Germany = 06).
To change the Regional Setting please use the Toshiba Internal Modem Region Select Utility.

ZTE MF667 usb modem doesn't work with yosemite

I have lost my internetten connection after having upgraded to yosemite. my usb modem (zte mf667) worked smoothly with mavericks. but it stopped to work when i upgraded to yosemite. i can not find a compatible driver either. now my machine is just a harddisk. what would a pc without internet look like?

I have the same problem with modem Prolink PHS101 not working with yosemite, was oke with maverick, apple please help

6303i Classic modem doesn't work - why?

In the 6303i user manual: "You can use your device as a modem by connecting it to a compatible PC. For details, see the Nokia Ovi Suite documentation"
Based on this I just bought a 6303i and wasted a morning trying to get the modem to work. I can connect to it using Hyperterminal, interrogate it, find out what network it's connected to (AT+COPS), what the call quality is (AT+CSQ), but as soon as I type ATD [phone no] it returns ERROR.
Why does AT+CSQ, +COPS etc work but ATD doesn't?

nowadays, nokia phones which comes with computer compatibles(connectivity) and gprs enable, also can be used as a modem.
I hope you are not typing your phone no. in atd command. it should be somewhat like *99#(contact your sp).
to use your phone as a modem, no need to go such detail(but if for some reason you need).
and there are lots of thread/topic on this forum
hope someone add more input on this issue

Fax modem doesn't work under Lion

Under Snow Leopard I was using without any problem an Apple Modem to snd the occasional fax.
Whilst the Print function in Lion stll allows to "Fax a PDF" the modem is not been recognized anymore.
I am getting the error message:
Unsupported
You cannot use an Apple USB MOdem with this computer
Any ideas ?

I bought the Zoom 3095 modem as I need to use fax for legal correspondence. Also, if I have to make hotel booking confirmations, I think it is more secure sending my credit card details on a fax rather than an email. An email can end up in a hotel PC, which may or may not have a proper firewall, instrusion protection, keylogger protection etc etc.
Fax works OK but on the main program I fax from, Word 2011, in Lion you cannot no longer use Fax PDF, where you now get an error message. You have to set the fax modem as your print device and then enter the fax number in the third pull down menu under "Fax Information".
Finally, although the Zoom modem faxes and you get the information on the icon on the screen header rail, you no longer hear dial tone and fax sending like you did with the Apple modem. I contacted Zoom and got this back - not very good!
Unfortunately, the Zoom 3095 doesn't have an on-board speaker, and we do not provide drivers (with sound support) for Mac OS X. The 3985 uses OS X's native USB CDC/ACM class driver. So you will not hear the dialing sounds, etc, when using the 3095 on a Mac. We have no plans at this to time release sound files for Mac.
All in all, a pretty poor effort from Apple. I bought a replacement just 15 months ago, after an earlier Apple Fax modem failed. 15 months is not a very long time to cut off software/driver support. I think the least Apple could do is offer us refunds for our non-functioning modems. OK it is not a lot of money to replace but a principle is at stake.
Wilson

Tecra S11-15T - GPRS modem doesn't work on internal USB port

My GPRS moden only works when I plug it into the dockingstation's USB port or if I use a USB port hub. If I plug it directly into the USB port on the laptop, I get an unknown device displayed in the device manager.
I have tried re-installing the chipset of my Toshiba Tecra S11-15T. I cannot get the device to work directly from the laptop's USB ports. I have WIN XP Professional.

Hi
Maybe the USB port does not provide enough power to get the modem working.
But all ports support the USB standards and every USB port is able to provide 500mA.
Possibly the modem needs more.
You can try to disable the USB power saving option.
In device manager, click right on USB root hub and go to Properties.
Then choose Power Management tab and uncheck the option; Allow the computer to turn off this device to save power

Apple Modem (for dialup) doesn't work in Lion. Why?

We have no acceptable alternatives for dialup where I live here. Even dialup is difficult. But the Apple Modem does not work in Lion!
Anyone know why Apple did that?
And what alternative is there for us (other than resinstalling Snow Leopard).
Does Apple not know that there are still PLENTY of places with poor or non-existent Internet services?
Does anyone know of an option?
Using a MacBookPro, but the problem appears to be Lion so the hardware would not seem to matter...

Hint: Look in the upper right hand corner
Re: Fax modem doesn't work under Lion
Re: will apple's usb modem work with Lion
external modem
Re: After installing Lion, my usb broadband modem doesn't work

Satellite A30, Win XP Pro SP3 - modem won't work

Another issue with this A30 Satellite notebook
The built in modem doesn't work.
*Explanation:*
The driver is correct and downloaded from the Toshiba support site.
The modem is identified as 'Toshiba software modem amr' and is setted on com3 port.
When I click on 'diagnostic' and 'ask modem' (the right labels may be different, since my is an Italian win xp, I just translated the Italian labels), a window appears saying it's impossible to open the door (port) which the modem is connected to.
I have tried to change the modem com port to different numbers but the problem is the same.
I don't know whether the modem is an actual board connected in some way to the main board or is just built on the main board. If it would be the first case, I could change it ad see. btw, the mini pci slot is already occupied by the gigabyte Wi-Fi board, so the modem must be somewhere else.
It is strange, since I did at least 2 other win xp pro installations on this machine, always downloading and installing the proper drivers, and the modem never has worked.
Thanks
S.

Hi
This old Satellite A30 was offered with Windows XP Home Edition/Professional SP1 so maybe you should install WXP SP1 and then all other stuff following original installation order.
Installations order for WXP.
1. Chipset Driver
2. Microsoft Updates
3. Display Driver
4. Sound Driver
5. Touch pad Driver
6. Network Driver
7. CardBus Driver
8. Modem Driver
9. V.92 Modem Driver
10. Wireless Network Driver
11. Atheros Client Utility
12. Infrared Driver
13. Power Management
14. E-Key Utility
15. Easy Button Utility
16. cPad/Touch pad On-Off Utility
17. Console
18. ConfigFree
19. Skins for Windows Media Player
20. User`s Manual
21. DVD Player
22. Drag'n Drop
23. Sun Java Runtime Environment
24. Screensaver
25. Wallpapers

I recently upgraded to mac os x lion. But now my broadband pen doesn't work. I'm portuguese and i use the vodafone network. Can anybody help me?

Hello.
My name is Margarido and i'm portuguese. I use a mobile operator named zon to access the web using a broadband pen modem.
This operator uses the vodafone technical support (network) and since i upgraded to the Mac OS X Lion, the pen modem doesn´t work.
Can anybody help me?
I eared that Mac OS X Lion doesn´t support pen modems yet. Is this true?
Thank you.

Your best bet is to call the Vodafone technical support helpline. Since each manufacturer writes custom software for each OS. They might be working on new drivers...

Want to extend my WLAN (ZyXEL) using 2013 airport extreme; doesn't work... Any ideas?

Hi
I want to extend my WLAN (using a ZyXEL VDSL-modem) with 2013 airport extreme. Doesn't work. What am I doing wrong?
Does APE only work with Twisted Pair cable? That's the only way so far I can access the Internet using APE. But that was not my plan when I ordered it. So - am I wrong or is there a solution (without buying airport express on top of it …)?
I am using AP utility v 6.3.1., OS X 10.8.4.
Thanks
swissgerman

In your case, you will need to connect the AirPort to the ZyXEL product with an Ethernet cable.
As far as your question of Does APE only work with Twisted pair cable?
I cannot answer for all products. I said "probably" because as far as I know and have tested....the Apple products will not "extend" a signal from another manufacturer wirelessly.
There might be a product that works with Apple. But, someone else will have to tell you what that product might be.
If you want to extend using wireless with Apple.....as far as I know.....it takes two Apple products to do this.

After upgrading my Macbook Air to OS Yosemite it doesn't recognise the 3G USB modem which was working previously. Any ideas

After upgrading my Macbook Air to OS Yosemite it doesn't recognise the 3G USB modem which was working previously. Any ideas?

Hi ..
Reset the PRAM > About NVRAM and PRAM
Those instructions are for Mavericks but will work on Yosemite as well.
Then try the USB modem.

Back to my mac doesn't work with Cable modem

I have at home Cable modem and a Airport Extreme, both use NAT to distribute internet, so it seems even if I connect the cable modem direct to my home Mac (without the Airport) that the Back to my mac doesn't work. Can somebody tell me how can I turn around this problem? Doesn anybody has it too?
The Back to my Mac panel displays this message when I have the Airport Extreme distribuiting the Internet: Back to My Mac isn't working properly because you may have more than one device on your network providing Network Address Translation (NAT). Try disabling NAT on one the devices.
And without the Aiport: Back to My Mac isn't working properly because it requieres a router that supports NAT Port Mapping Protocol (NAT-PMP) or Universal Plug and Play (UPnP). Make sure your router supports one of these protocols and that it is enabled.

If I may continue this thread, I have the same double NAT issue and am using a DSL modem/router combo. I added an Airport Extreme to my Qwest supplied Actiontec dsl Modem/Router in hopes it would solve issues with Back to my Mac, among other things. The dsl modem supports UPnP to some degree, but BtmM doesn't seem to like it.
Currently the setup uses the DSL modem/router first in line, functioning as modem, NAT, router, but no DHCP (or wifi). That plugs into the WAN port of the Airport BaseSta. The Base Station runs in bridge mode, and distributes the ethernet and wifi connections. I would rather bridge the modem and disable its router functions, and let the Airport handle NAT and routing and wifi and Back-To-My-Mac.
What are the alternatives? Any help appreciated!

After last update my iphone doesn't work as a USB modem anymore

Hi,
I installed some softwareupdate to my MacBook Air today - and now my iPhone doesn't work as a USB modem anymore. Connecting via Wifi works. But this drains too much batteries - and USB usually works more consistant for me (and it connects a lot faster). What can I do?

Hi Sonja
I am facing same problem in my macbook pro still not get any reply from apple or any one els
Rizwan

Zyxel modem doesn't work

Similar Messages

Maybe you are looking for