$0, $1..$9 back-reference in CF7.

I have just discovered the $ back-reference in Coldfusion
which seems to
be an undocumented feature. I'm not sure of CF7 is using its
own regex
engine or using Java's, but the $ back-reference seems to
work
differently than java's.
What I have discovered is that this back-reference only works
if it is
leaning against a left-side cr or lf. But if the
back-reference is
found in the middle of a line it gets ignored.
I have written my code around these rules, but if anyone has
any input I
would appreciate it.
Thanks

> Why are you trying to "escape" dollar signs that are
immediately after a
> line break, anyhow?
Because my experience has shown that only $1 after a line
break are
affected.
Adam Cameron wrote:
> On Thu, 07 Sep 2006 12:28:44 -0400, Don Vaillancourt
wrote:
>
>> Sample 3:
>>
>> If I escape the $ that appears after a CR/LF, I get
this result.
>>
>> myvar = "This is a test product that will cost
>> $1,599.00 dollars with shipping at $4.99";
>>
>> myvar = Replace(myvar, "#chr(13)#$", "#chr(13)#$$",
"All");
>> myvar = Replace(myvar, "#chr(10)#$", "#chr(10)#$$",
"All");
>>
>> myvar = ReReplace(myvar, "(dollars)", "Euros");
>>
>> The result will be:
>>
>> This is a test product that will cost
>> $1,599.00 Euros with shipping at $4.99
>
> Err... no it ain't, it's:
> This is a test product that will cost
> $$1,599.00 Euros with shipping at $4.99
>
> Which is exactly what I'd expect, given what you're
doing.
>
> I have put some intermediary output in your "logic"
which demonstrates
> where you're getting confused.
>
> Try this:
>
> <cfscript>
> myvar = "This is a test product that will cost
> $1,599.00 dollars with shipping at $4.99";
> writeOutput("Original:<br
/><pre>#myVar#</pre><br /></hr />");
>
> myvar = Replace(myvar, "#chr(13)#$", "#chr(13)#$$",
"All");
> writeOutput("Swap CR$ with CR$$:<br
/><pre>#myVar#</pre><br /></hr />");
>
> myvar = Replace(myvar, "#chr(10)#$", "#chr(10)#$$",
"All");
> writeOutput("Swap LF$ with LF$$:<br
/><pre>#myVar#</pre><br /></hr />");
>
> myvar = ReReplace(myvar, "(dollars)", "Euros");
> writeOutput("Swap (dollars) for
Euros:<pre>#myVar#</pre><br /></hr />");
> </cfscript>
>
> The output is:
>
> Original:
>
> This is a test product that will cost
> $1,599.00 dollars with shipping at $4.99
>
>
> Swap CR$ with CR$$:
>
> This is a test product that will cost
> $1,599.00 dollars with shipping at $4.99
>
>
> Swap LF$ with LF$$:
>
> This is a test product that will cost
> $$1,599.00 dollars with shipping at $4.99
>
>
> Swap (dollars) for Euros:
>
> This is a test product that will cost
> $$1,599.00 Euros with shipping at $4.99
>
>
> I THINK you are falling foul of the fact that the EOL
"marker" is CRLF, so
> the first substitution actually doesn't match anything:
there is no
> sequence "#chr(13)#$", it's "#chr(13)##chr(10)#$"
>
>
> Just to confirm: as far as I can tell, CFMX passes all
regex operations
> directly to Java.
>

Similar Messages

  • Toplink Cache "back reference" best practice question.

    I have too many objects being stored in the Identity map. I'm using the default Soft/Weak map. The problem is every objects connects to every other objects. Since every objects can somehow be traced to each other all objects nothing is removed.
    Let's look at an example. I have two objects Projects and Tasks. A project has a collection of tasks and the task's have a "back reference" to the project. If just one task is in the "soft" section of the Identity map then all the other tasks, which are in the weak section, aren't eligible for garbage collection. The task has a simple OneToOne mapping to the project. I'm using a valueholder to hold the project. This particular instance doesn't use indirection, but there are many other objects that have a similar setup that do.
    These mappings are really convenient for reporting. For example through any task I can easily print the project's name. No query, joining, etc is necessary. This is critical to the app because we have a dynamic report builder where end users and print off anything they want. This flexibility though all of our mappings enables us to build a powerful report builder. Besides the report builder there are other modules that work in a similar fashion. Needless to say the application will build with the assumption that these "back references" exist. That said, I need to remove objects from the identity map.
    Is there a way to manually remove / invalidate the back references and have it repopulated on access? Similar to how indirection works?
    Is it possible to re-init an indirection value holder?
    Does anyone have any suggestions?
    I've looked at using an invalidation policy but that doesn't seem to remove anything. It still keeps the objects in memory. It just refreshes the object on access.

    Soft references should still garbage collect when memory is low, so you should still be ok memory wise, even with your cycles. If you want memory to be freed more aggressively, then use a Weak cache instead of Soft, or decrease your Soft cache size.
    There is no refresh() or revert() API on a ValueHolder, but if you refresh the source object, it will revert all of its relationships. Having a refresh() or revert() API of ValueHolder would be useful, so feel free to log an enhancement request on EclipseLink for that. You also may be able to cook something up using the mapping and readFromRowIntoObject(). Another option would be to just set the relationship to null and invalidate the object so it is refreshed when next accessed.
    James : http://www.eclipselink.org

  • Regular expressions and back references

    Just wanted to know if anyone else noticed that.
    In the javadoc of java.util.regex.Pattern in the "Back references" section it says that you need to use \n to match capturing group but it does not work. To match a capturing group one need to use a "$" sign which is not standard for this type of operation.
    For example, the following code should work according to the API and most other regular expression engines:
    Pattern.compile("([A-Z])").matcher("ThisIsATestString").replaceAll(" \1");
    But to make this work you need to use:
    Pattern.compile("([A-Z])").matcher("ThisIsATestString").replaceAll(" $1");
    So, is this just a doc bug or am I missing something?
    Someone have any idea why Sun choose to use the "$" sign instead of the regular "\" sign??
    TIA,
    Shaul

    The doc you're referring to is talking about using back-refereneces within the regex, not in the replacement string. For instance, if you wanted to find all instances of things like "foo-foo" or "bar-bar", you would use a Pattern like   Pattern p = Pattern.compile("([a-z]+)-\\1");For the most part, they've made the syntax the same a Perl's regexes, and that's why they use $n instead of \n in the replacement string. The replacement string is described in the Matcher javadoc.

  • 1:n relationship back reference?

    Hi! I'm trying to model a 1:n relationship and read in TopLink documentation that, for a 1:n relationship a back poiner 1:1 relation is needed to (from the n-side to the 1-side).
    The documentation sadly does not go into more detail on the back pointer 1:1 relationship, so I'm not sure how I need to model this back-reference. Maybe some of you can shed some light on it:
    1) In the Table Reference tab, do I need to check "Target Foreign Key" for 1:1 back pointer relationship?
    2) Do I need to check "Maintain Bidirectional Relationship"? (If not, how does TL know it is a back pointer?)
    3) Can I use "Private Owned" if the livecycle of the n-side objects is bound to the object on the 1-side?
    4) Will TL take care of filling in the backpointers for objects in that are newly associated (put into the collection on the 1-side)?
    Hint greatly appreciated!
    Sebastian

    Hello Sebastian,
    TopLink recommends a 1:1 backpointer when using a 1:M because of the way the database relation works. A 1:M at the database level is really just a 1:1 relation going the other way. So for an Employee having many phone numbers, at the database level, each phone number has only a single employee.
    Because of that, the Phone table has the foreign key. When you make changes to Employee (say adding new PhoneNumbers), these changes will only cause updates to the Employee table. This in effect makes the 1:M relation very much like a read-only relation. To change the foreign key which is associated to a row in the Phone table, you need a mapping to it in the PhoneNumber object. Best way to do this is a 1:1 mapping, but it doesn't need to be - it can be a direct to field etc if you want to maintain the value yourself.
    1) Since the 1:1 back pointer is just a normal 1:1, it the foreign key is in the source table (Phone). So the mapping should not use the "target foreign key" check box, which is reserved for use if the Target table has the foreign key (ie a back pointer to a 1:1)
    2) "Maintain Bidirectional Relationship" is a concept brought about by ejb2 support. I do not recommend it - It tells TopLink to maintain the relationship rather than leaving control to the application. So when your app sets one side of the relation, the otherside gets set by TopLink after commit. This feature is easily done in code just by having your setter methods set the otherside's relationship. Using this requires both sides to be registered first, and can cause issues when database constraints arent taken into account.
    3) Private ownership is a seperate concept. You would set this on a relationship when the object being refered to should not exist and is dependent on the source object. For instance, Employee might privately own a phone number, but phone number would not own an Employee. This means that removing a PhoneNumber from Employee's collection will cause TopLink to delete it from the database, and that removing employee will cause its PhoneNumbers to also be removed. Only recommended if nothing else can reference the object to be deleted.
    4) No, unless you see #2. I'd really not recommend "Maintain Bidirectional Relationship" as it is really easy to ensure you set both sides of a relationship, and less hassle in the long run.
    Regards,
    Chris

  • Regular Expression back-reference in character class

    I am trying to capture quoted text (excluding the quotes) with the following pattern:
    "(['\"])([^\\1]+)\\1"
    The input string might look like:
    "That's strange"
    or:
    'valid "regex" pattern'
    I get an exception when trying to compile the pattern, because of the back-reference within character-class brackets: [^\1]
    This pattern worked with the org.apache.oro package. Is this a bug in the 1.4 Pattern class? Can you offer an alternative solution?
    Thanks,
    Tony

    Thanks for the reply. Apparently, my pattern wasn't working as I thought with ORO. The pattern you suggested, however, wouldn't do what I need either, because it would match anything between the first and last quote character. I don't want to match the string you included in your reply, because it includes the same quote character that encloses the entire string. If you think about my pattern again, you'll notice that the first capture group should match either a single or double quote character. Then the back-reference should be the exact character (single character) that was matched and captured. So the second capture group should be any number of characters, as long as they don't match the first capture group character, followed by the exact string matched in the first capture group (the single character). You probably are aware that when one or more characters are included in square brackets [], that it specifies a match of a single character that is found anywhere within that character class. So if the first capture group happened to match more than one character (impossible due to the pattern in that grouping), the following character class [^\1] should match any character EXCEPT any of the ones matched in the first capture group...right? There must be a bug in ORO that doesn't match correctly per my description, but it seems there is a bug in JDK 1.4 Pattern that will not even compile it. Just to re-iterate...if \1 matched "abc", [^\1] should match any single character EXCEPT a or b or c. I can get what I want, though, if I do it in 2 matches:
    Pattern pat = Pattern.compile("(['\"])(.*)");
    Matcher mat = pat.matcher(sText);
    mat.matches();
    String sQuote = mat.group(1);
    String sRem = mat.group(2);
    pat = Pattern.compile("([^" + sQuote + "]*)" + sQuote);
    mat = pat.matcher(sRem);
    mat.matches();
    String sWhatIWanted = mat.group(1);
    Thanks,
    Tony

  • [DW CC] Regular Expression and Back Reference in "Replace with": Escape

    I have a problem with escaping a character in "Replace with".
    Let's assume the following situation:
    Content:
    foobar
    Search for:
    (foo)(bar)
    Replace by:
    $1zot$2
    Result:
    foozotbar
    Everything is fine.
    But I want to insert the number "2" in between foo and bar.
    When I use
    Replace by: $12$2
    The result is:
    $12$2
    It seems that the regex engine interpretes the "$12" as a whole. And because there's no back reference with the count "12" DW cannot work correctly.
    The question:
    How can I "escape" the "2"?
    Thanks.

    Dreamweaver uses JavaScript for its Find and Replace with regex.
    I've just checked the Regular Expressions Cookbook by Jan Goyvaerts and Steven Levithan (O'Reilly). It deals with exactly this sort of situation where capturing groups can be ambiguous. This is what it says:
    "Java and JavaScript try to be clever with $10 [and above]. If a capturing group with the two-digit number exists in your regular expresssion, both digits are used for the capturing group. If fewer capturing groups exist, only the first digit is used to reference the group, leaving the second as a literal. Thus $23 is the 23rd capturing group, if it exists. Otherwise, it is the second capturing group followed by a literal 3."
    In other words, there is no way to escape the 2 in the Replace field. It would appear there's a bug in Dreamweaver's use of capturing groups.

  • Understanding loitering objects and back references in profiler

    i'm trying to debug a problem in my AIR app that results in
    exhaustion of USER objects (USER objects are viewable in the
    sysinternals tool process explorer) on my windows xp sp2 system.
    once the USER objects for my AIR app grow to a certain number
    (between 2000 and 3000) i'm unable to open new windows on my
    computer.
    i'm using the profiler in flex builder 3 beta 2 to help
    troubleshoot this problem. i take a memory snapshot, then interact
    with my AIR app and watch the USER objects count climb, then take
    another memory snapshot. i then click "Find Loitering Objects".
    that opens up a Loitering Objects tab - i'm guessing that these
    loitering objects are responsible for the USER objects climb.
    most of the Loitering Objects are not my classes, but a few
    are. Regex and RegexEditor, two model classes of mine, show an
    Instance count equal to the total number of Instances i'd expect to
    have been created between the two memory snapshots. if my app was
    correctly functioning i'd expect the count for each to show 1, not
    <n> where <n> is the number of times a new instance of
    these objects is created. that leads me to believe that somewhere
    in my code i'm hanging on to a reference to these objects,
    preventing them from being garbage collected (i've tried clicking
    the Run Garbage Collector link in the profiler, which doesn't
    decrease the count of these objects). the Regex class extends
    EventDispatcher, so there certainly could be a programming error on
    my part (e.g. not removing event listeners) that could prevent
    these objects from being garbage collected.
    however, when i double click Regex in the Loitering Objects
    view to view the Object References, i only find a single back
    reference to RegexEditor. all other Regex instances have no back
    references, yet they remain in memory. no RegexEditor instance has
    a back reference, which doesn't make sense either - there is
    definitely a reference to one instance of this class in my
    application. i don't see any back references to view classes, which
    doesn't make sense to me either, since there is a view class that
    binds to the property values of Regex.
    perhaps i fail to understand what back references mean in the
    profiler. could someone clarify this for me? my best hope for
    diagnosing the leak was to find the unexpected back references and
    make sure i clean those up. any other suggestions for diagnosing my
    problem?
    thanks.

    i'm trying to debug a problem in my AIR app that results in
    exhaustion of USER objects (USER objects are viewable in the
    sysinternals tool process explorer) on my windows xp sp2 system.
    once the USER objects for my AIR app grow to a certain number
    (between 2000 and 3000) i'm unable to open new windows on my
    computer.
    i'm using the profiler in flex builder 3 beta 2 to help
    troubleshoot this problem. i take a memory snapshot, then interact
    with my AIR app and watch the USER objects count climb, then take
    another memory snapshot. i then click "Find Loitering Objects".
    that opens up a Loitering Objects tab - i'm guessing that these
    loitering objects are responsible for the USER objects climb.
    most of the Loitering Objects are not my classes, but a few
    are. Regex and RegexEditor, two model classes of mine, show an
    Instance count equal to the total number of Instances i'd expect to
    have been created between the two memory snapshots. if my app was
    correctly functioning i'd expect the count for each to show 1, not
    <n> where <n> is the number of times a new instance of
    these objects is created. that leads me to believe that somewhere
    in my code i'm hanging on to a reference to these objects,
    preventing them from being garbage collected (i've tried clicking
    the Run Garbage Collector link in the profiler, which doesn't
    decrease the count of these objects). the Regex class extends
    EventDispatcher, so there certainly could be a programming error on
    my part (e.g. not removing event listeners) that could prevent
    these objects from being garbage collected.
    however, when i double click Regex in the Loitering Objects
    view to view the Object References, i only find a single back
    reference to RegexEditor. all other Regex instances have no back
    references, yet they remain in memory. no RegexEditor instance has
    a back reference, which doesn't make sense either - there is
    definitely a reference to one instance of this class in my
    application. i don't see any back references to view classes, which
    doesn't make sense to me either, since there is a view class that
    binds to the property values of Regex.
    perhaps i fail to understand what back references mean in the
    profiler. could someone clarify this for me? my best hope for
    diagnosing the leak was to find the unexpected back references and
    make sure i clean those up. any other suggestions for diagnosing my
    problem?
    thanks.

  • Grouping & Back-references with regular expressions on Replace Text window

    I really appreciate the inclusion of the Regular Expressions in the search & replace feature. One thing I am missing is back-references in the replacement expression. For instance, in the unix tools vi or sed, I might do something like this:
    s/\(firstPart\) \(secondPart\) \(oldThirdPart\)/\2 \1 newThirdPart/g
    which would allow me to switch the places of firstPart and secondPart, and totally replace thirdPart. If grouping and back-references are already present in the Replace Text window, how does one correctly invoke them?

    duplicate of Grouping & Back-references with regular expressions on Replace Text window

  • Regular Expression back-reference Find/Replace in SQL Developer 4.0

    I cannot seem to get the Search/Replace functionality to use back-references with Regular Expressions in 4.0.  This worked fine in 3.0.
    Text in my editor:
    abc
    Example:
    Find: (a)(bc)
    Replace:
    \1\1\1\2
    Should result in:
    aaabc
    Instead I get:
    \1\1\1\2
    This still isn't fixed in 4.0.2 - I'll try to find time to put in MOS as a bug...

    You know what, I think I'm logging in a sys on the command line on the sqlplus side of the house, AHA!
    Wow, I must be tired....LOL...thanks

  • Back reference for regular expressions on "Search & Replace".

    Can't I reference a result from my Regular Expression used on "Search Clause" into my "Replace Clause"?
    What I'm doing is:
    Using JDev 10.1.3 DP,
    Search Menu -> Replace in Files...
    Select "Regular Expressions"
    Text: (A[0-9]*?_)(.)
    Replace with: $2 (reference to the second Parenthesis in the "Text" Field).
    For example, in Java, I would so something like this:
    "Dummy String".replaceAll("(D.*? )(S)", "$2");
    Are there any other ways that I can just Search something and Replace for nothing? I need a simple "Search and Delete", you know?
    If I don't do that and try to leave it blank, a warning comes up saying that the "Replace with" field cannot be blank.
    Any sugestions?

    BOUNCE!
    Please, anyone?
    Will I really have to delete 1200 occurrences by hand???
    :(

  • EJB/JPA Session/Entity Bean: Back Reference Id not set

    Hello All,
    I m using JPA as a persist tool. I have an entity Account and in Account there is a collection of entity AccountDetail. In Account entity relation for AccountDetail is One-To-Many and in AccountDetail the relation for Account is Many-To-One. When i save the Account, object of Account and AccountDetail are saved correctly. But the problem is that in AccountDetail the Id of Account is not saved in Database table. I have AccountId in AccountDetail table. plz help me??
    Second thing is that how to generate automatically primary keys when entity saved in database ???

    define the column you want to auto increment as an Integer with Identity attribute set to True (using the sql server management tool for example) and then put
    @Id
    @GeneratedValue(strategy = GenerationType.IDENTITY)
    in front of the ID declaration in the mapping file, it should generate the IDs automatically.

  • Registering call back object reference

    hello to all.
    I am developing a RMI application and I have a problem while registering the call back reference object of client.
    I have followed what ever thing required to register the clients object reference to register at the server side and server can call my client and it works fine in local environment. But when I use live environment my client can register the object but server cannot call my client.
    When I use following code while registering the client reference object
    System.out.println("Call me back registered as \n"+cmb); //cmb the the clients reference objectit gives following output
    Call me back registered as  
    Admin_Stub[UnicastRef [liveRef: [endpoint:[192.168.1.2:56851](remote),objID:[-57856c9e:124db6554b6:-7ffe, -7745666993431596650]]]]  At localhost it works fine even if my IP address changes to 192.168.1.2 to 192.168.1.4 or 6 i.e. works fine in local environment but when registering to the live environment it registers with the same IP address as shown in the output. So what can I do to register the object so that server can call me.
    Also when server get the reference of my client's object and try to connect my client it gives an exception of connection time out, which means it cannot find my client to reply.
    So, please suggest me what to do.
    Thank in advance.

    Very difficult, in fact impossible. You have to allolw for the presence or absence of:
    (a) client-side firewalls
    (b) client-side NAT
    (c) misconfigured client-side DNS, e.g. the Linux /etc/hosts issue described in the FAQ item.
    So some client-side configuration is inevitable. Most people avoid callback-based applications over the Internet for these reasons, as well as the security reasons that cause this issue in the first place.

  • Find & replace part of a string in Numbers using do shell script in AppleScript

    Hello,
    I would like to set a search-pattern with a wildcard in Applescript to find - for example - the pattern 'Table 1::$*$4' for use in a 'Search & Replace script'
    The dollar signs '$' seem to be a bit of problem (refers to fixed values in Numbers & to variables in Shell ...)
    Could anyone hand me a solution to this problem?
    The end-goal - for now - would be to change the reference to a row-number in a lot of cells (number '4' in the pattern above should finally be replaced by 5, 6, 7, ...)
    Thx.

    Hi,
    Here's how to do that:
    try
        tell application "Numbers" to tell front document to tell active sheet
            tell (first table whose selection range's class is range)
                set sr to selection range
                set f to text returned of (display dialog "Find this in selected cells in Numbers " default answer "" with title "Find-Replace Step 1" buttons {"Cancel", "Next"})
                if f = "" then return
                set r to text returned of (display dialog "Replace '" & f & "' with " default answer f with title "Find-Replace Step 2")
                set {f, r} to my escapeForSED(f, r) -- escape some chars, create back reference for sed
                set tc to count cells of sr
                tell sr to repeat with i from 1 to tc
                    tell (cell i) to try
                        set oVal to formula
                        if oVal is not missing value then set value to (my find_replace(oVal, f, r))
                    end try
                end repeat
            end tell
        end tell
    on error number n
        if n = -128 then return
        display dialog "Did you select cells?" buttons {"cancel"} with title "Oops!"
    end try
    on find_replace(t, f, r)
        do shell script "/usr/bin/sed 's~" & f & "~" & r & "~g' <<< " & (quoted form of t)
    end find_replace
    on escapeForSED(f, r)
        set tid to text item delimiters
        set text item delimiters to "*" -- the wildcard 
        set tc1 to count (text items of f)
        set tc2 to count (text items of r)
        set text item delimiters to tid
        if (tc1 - tc2) < 0 then
            display alert "The number of wildcard in the replacement string must be equal or less than the number of wildcard in the search string."
            error -128
        end if
        -- escape search string, and create back reference for each wildcard (the wildcard is a dot in sed) --> \\(.\\)
        set f to do shell script "/usr/bin/sed -e 's/[]~$.^|[]/\\\\&/g;s/\\*/\\\\(.\\\\)/g' <<<" & quoted form of f
        -- escape the replacement string, Perl replace wildcard by two backslash and an incremented integer, to get  the back reference --> \\1 \\2
        return {f, (do shell script "/usr/bin/sed -e 's/[]~$.^|[]/\\\\&/g' | /usr/bin/perl -pe '$n=1;s/\\*/\"\\\\\" . $n++/ge'<<<" & (quoted form of r))}
    end escapeForSED
    For what you want to do, you must have the wildcard in the same position in both string. --> find "Table 1::$*$3", replace "Table 1::$*$4"
    Important, you can use no wildcard in both (the search string and the replacement string) or you can use any wildcard in the search string with no wildcard in the replacement string).
    But, the number of wildcard in the replacement string must be equal or less than the number of wildcard in the search string.

  • Trying to get lighttpd to upload a file through perl cgi

    Hi, I'm quite new in these things, so I might be doing something obvious wrong, but I'd like some help on this.
    I'm trying to make a webpage where people can upload files, this is the html page (located at /srv/html/index.html):
    <!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN"
    "http://www.w3.org/TR/html4/loose.dtd">
    <html xmlns="http://www.w3.org/1999/xhtml" xml:lang="en" lang="en">
    <head>
    <meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
    <title>lighttpd Test Page</title>
    </head>
    <body>
    <div style="text-align:center; font: 12px sans-serif;">
    <span style="font-weight: bold; font-size: 20px;">
    Arch Linux
    </span>
    <br><br>
    This is a test page for the lighttpd Web Server.<br>
    <form action="/cgi-bin/upload.pl" method="post" enctype="multipart/form-data">
    <input type="file" name="fileName" size="40">
    <input type="submit" value="Send">
    <input type="reset">
    </form>
    </div>
    </body>
    </html>
    And the backend (in /srv/html/cgi-bin/upload.pl):
    #!/usr/bin/perl -wT
    use strict;
    use CGI;
    use CGI::Carp qw ( fatalsToBrowser );
    use File::Basename;
    $CGI::POST_MAX = 1024 * 1024 * 5000; # 5GB filesize limit
    my $safe_filename_characters = "a-zA-Z0-9_.-";
    my $upload_dir = "/srv/jail/";
    my $query = new CGI;
    my $filename = $query->param("fileName");
    if ( !$filename )
    print $query->header ( );
    print "There was a problem uploading your file (filesize limit may be exceeded).";
    exit;
    my ( $name, $path, $extension ) = fileparse ( $filename, '\..*' );
    $filename = $name . $extension;
    $filename =~ tr/ /_/;
    $filename =~ s/[^$safe_filename_characters]//g;
    if ( $filename =~ /^([$safe_filename_characters]+)$/ )
    $filename = $1;
    else
    die "Filename contains invalid characters";
    my $upload_filehandle = $query->upload("fileName");
    open ( UPLOADFILE, ">$upload_dir/$filename" ) or die "$!";
    binmode UPLOADFILE;
    while ( <$upload_filehandle> )
    print UPLOADFILE;
    close UPLOADFILE;
    print $query->header ( );
    print <<END_HTML;
    <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN" "DTD/xhtml1-strict.dtd">
    <html xmlns="http://www.w3.org/1999/xhtml" xml:lang="en" lang="en">
    <head>
    <meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
    <title>Done!</title>
    </head>
    <body>
    <p>Uploading done!</p>
    </body>
    </html>
    END_HTML
    My server config:
    # lighttpd configuration file
    # use it as a base for lighttpd 1.0.0 and above
    # $Id: lighttpd.conf,v 1.7 2004/11/03 22:26:05 weigon Exp $
    ############ Options you really have to take care of ####################
    ## modules to load
    # at least mod_access and mod_accesslog should be loaded
    # all other module should only be loaded if really neccesary
    # - saves some time
    # - saves memory
    server.modules = (
    # "mod_rewrite",
    # "mod_redirect",
    # "mod_alias",
    "mod_access",
    # "mod_cml",
    # "mod_trigger_b4_dl",
    # "mod_auth",
    # "mod_status",
    # "mod_setenv",
    # "mod_fastcgi",
    # "mod_proxy",
    # "mod_simple_vhost",
    # "mod_evhost",
    # "mod_userdir",
    "mod_cgi",
    # "mod_compress",
    # "mod_ssi",
    # "mod_usertrack",
    # "mod_expire",
    # "mod_secdownload",
    # "mod_rrdtool",
    "mod_accesslog" )
    ## a static document-root, for virtual-hosting take look at the
    ## server.virtual-* options
    server.document-root = "/srv/http/"
    ## where to send error-messages to
    server.errorlog = "/var/log/lighttpd/error.log"
    # files to check for if .../ is requested
    index-file.names = ( "index.php", "index.html",
    "index.htm", "default.htm" )
    ## set the event-handler (read the performance section in the manual)
    # server.event-handler = "freebsd-kqueue" # needed on OS X
    # mimetype mapping
    mimetype.assign = (
    ".pdf" => "application/pdf",
    ".sig" => "application/pgp-signature",
    ".spl" => "application/futuresplash",
    ".class" => "application/octet-stream",
    ".ps" => "application/postscript",
    ".torrent" => "application/x-bittorrent",
    ".dvi" => "application/x-dvi",
    ".gz" => "application/x-gzip",
    ".pac" => "application/x-ns-proxy-autoconfig",
    ".swf" => "application/x-shockwave-flash",
    ".tar.gz" => "application/x-tgz",
    ".tgz" => "application/x-tgz",
    ".tar" => "application/x-tar",
    ".zip" => "application/zip",
    ".mp3" => "audio/mpeg",
    ".m3u" => "audio/x-mpegurl",
    ".wma" => "audio/x-ms-wma",
    ".wax" => "audio/x-ms-wax",
    ".ogg" => "application/ogg",
    ".wav" => "audio/x-wav",
    ".gif" => "image/gif",
    ".jar" => "application/x-java-archive",
    ".jpg" => "image/jpeg",
    ".jpeg" => "image/jpeg",
    ".png" => "image/png",
    ".xbm" => "image/x-xbitmap",
    ".xpm" => "image/x-xpixmap",
    ".xwd" => "image/x-xwindowdump",
    ".css" => "text/css",
    ".html" => "text/html",
    ".htm" => "text/html",
    ".js" => "text/javascript",
    ".asc" => "text/plain",
    ".c" => "text/plain",
    ".cpp" => "text/plain",
    ".log" => "text/plain",
    ".conf" => "text/plain",
    ".text" => "text/plain",
    ".txt" => "text/plain",
    ".dtd" => "text/xml",
    ".xml" => "text/xml",
    ".mpeg" => "video/mpeg",
    ".mpg" => "video/mpeg",
    ".mov" => "video/quicktime",
    ".qt" => "video/quicktime",
    ".avi" => "video/x-msvideo",
    ".asf" => "video/x-ms-asf",
    ".asx" => "video/x-ms-asf",
    ".wmv" => "video/x-ms-wmv",
    ".bz2" => "application/x-bzip",
    ".tbz" => "application/x-bzip-compressed-tar",
    ".tar.bz2" => "application/x-bzip-compressed-tar",
    # default mime type
    "" => "application/octet-stream",
    # Use the "Content-Type" extended attribute to obtain mime type if possible
    #mimetype.use-xattr = "enable"
    ## send a different Server: header
    ## be nice and keep it at lighttpd
    # server.tag = "lighttpd"
    #### accesslog module
    accesslog.filename = "/var/log/lighttpd/access.log"
    ## deny access the file-extensions
    # ~ is for backupfiles from vi, emacs, joe, ...
    # .inc is often used for code includes which should in general not be part
    # of the document-root
    url.access-deny = ( "~", ".inc" )
    $HTTP["url"] =~ "\.pdf$" {
    server.range-requests = "disable"
    # which extensions should not be handle via static-file transfer
    # .php, .pl, .fcgi are most often handled by mod_fastcgi or mod_cgi
    static-file.exclude-extensions = ( ".php", ".pl", ".fcgi" )
    ######### Options that are good to be but not neccesary to be changed #######
    ## bind to port (default: 80)
    server.port = ###
    ## bind to localhost (default: all interfaces)
    #server.bind = "127.0.0.1"
    ## error-handler for status 404
    #server.error-handler-404 = "/error-handler.html"
    #server.error-handler-404 = "/error-handler.php"
    ## to help the rc.scripts
    server.pid-file = "/var/run/lighttpd/lighttpd.pid"
    ###### virtual hosts
    ## If you want name-based virtual hosting add the next three settings and load
    ## mod_simple_vhost
    ## document-root =
    ## virtual-server-root + virtual-server-default-host + virtual-server-docroot
    ## or
    ## virtual-server-root + http-host + virtual-server-docroot
    #simple-vhost.server-root = "/srv/http/vhosts/"
    #simple-vhost.default-host = "www.example.org"
    #simple-vhost.document-root = "/htdocs/"
    ## Format: <errorfile-prefix><status-code>.html
    ## -> ..../status-404.html for 'File not found'
    #server.errorfile-prefix = "/usr/share/lighttpd/errors/status-"
    #server.errorfile-prefix = "/srv/http/errors/status-"
    ## virtual directory listings
    #dir-listing.activate = "enable"
    ## enable debugging
    #debug.log-request-header = "enable"
    #debug.log-response-header = "enable"
    #debug.log-request-handling = "enable"
    #debug.log-file-not-found = "enable"
    ### only root can use these options
    # chroot() to directory (default: no chroot() )
    #server.chroot = "/"
    ## change uid to <uid> (default: don't care)
    server.username = "http"
    ## change uid to <uid> (default: don't care)
    server.groupname = "http"
    #### compress module
    #compress.cache-dir = "/var/cache/lighttpd/compress/"
    #compress.filetype = ("text/plain", "text/html")
    #### proxy module
    ## read proxy.txt for more info
    #proxy.server = ( ".php" =>
    # ( "localhost" =>
    # "host" => "192.168.0.101",
    # "port" => 80
    #### fastcgi module
    ## read fastcgi.txt for more info
    ## for PHP don't forget to set cgi.fix_pathinfo = 1 in the php.ini
    #fastcgi.server = ( ".php" =>
    # ( "localhost" =>
    # "socket" => "/var/run/lighttpd/php-fastcgi.socket",
    # "bin-path" => "/usr/bin/php-cgi"
    #### CGI module
    cgi.assign = ( ".pl" => "/usr/bin/perl",
    ".cgi" => "/usr/bin/perl" )
    #### SSL engine
    #$SERVER["socket"] == "0.0.0.0:443" {
    ssl.engine = "enable"
    ssl.pemfile = "/etc/ssl/private/lighttpd.pem"
    # server.errorlog = "/var/log/lighttpd/error-ssl.log"
    # accesslog.filename = "/var/log/lighttpd/access-ssl.log"
    # server.document-root = "/home/lighttpd/html-ssl"
    #### status module
    #status.status-url = "/server-status"
    #status.config-url = "/server-config"
    #### auth module
    ## read authentication.txt for more info
    #auth.backend = "plain"
    #auth.backend.plain.userfile = "lighttpd.user"
    #auth.backend.plain.groupfile = "lighttpd.group"
    #auth.backend.ldap.hostname = "localhost"
    #auth.backend.ldap.base-dn = "dc=my-domain,dc=com"
    #auth.backend.ldap.filter = "(uid=$)"
    #auth.require = ( "/server-status" =>
    # "method" => "digest",
    # "realm" => "download archiv",
    # "require" => "user=jan"
    # "/server-config" =>
    # "method" => "digest",
    # "realm" => "download archiv",
    # "require" => "valid-user"
    #### url handling modules (rewrite, redirect, access)
    #url.rewrite = ( "^/$" => "/server-status" )
    #url.redirect = ( "^/wishlist/(.+)" => "http://www.123.org/$1" )
    #### both rewrite/redirect support back reference to regex conditional using %n
    #$HTTP["host"] =~ "^www\.(.*)" {
    # url.redirect = ( "^/(.*)" => "http://%1/$1" )
    # define a pattern for the host url finding
    # %% => % sign
    # %0 => domain name + tld
    # %1 => tld
    # %2 => domain name without tld
    # %3 => subdomain 1 name
    # %4 => subdomain 2 name
    #evhost.path-pattern = "/srv/http/vhosts/%3/htdocs/"
    #### expire module
    #expire.url = ( "/buggy/" => "access 2 hours", "/asdhas/" => "access plus 1 seconds 2 minutes")
    #### ssi
    #ssi.extension = ( ".shtml" )
    #### rrdtool
    #rrdtool.binary = "/usr/bin/rrdtool"
    #rrdtool.db-name = "/var/lib/lighttpd/lighttpd.rrd"
    #### setenv
    #setenv.add-request-header = ( "TRAV_ENV" => "mysql://user@host/db" )
    #setenv.add-response-header = ( "X-Secret-Message" => "42" )
    ## for mod_trigger_b4_dl
    # trigger-before-download.gdbm-filename = "/var/lib/lighttpd/trigger.db"
    # trigger-before-download.memcache-hosts = ( "127.0.0.1:11211" )
    # trigger-before-download.trigger-url = "^/trigger/"
    # trigger-before-download.download-url = "^/download/"
    # trigger-before-download.deny-url = "http://127.0.0.1/index.html"
    # trigger-before-download.trigger-timeout = 10
    ## for mod_cml
    ## don't forget to add index.cml to server.indexfiles
    # cml.extension = ".cml"
    # cml.memcache-hosts = ( "127.0.0.1:11211" )
    #### variable usage:
    ## variable name without "." is auto prefixed by "var." and becomes "var.bar"
    #bar = 1
    #var.mystring = "foo"
    ## integer add
    #bar += 1
    ## string concat, with integer cast as string, result: "www.foo1.com"
    #server.name = "www." + mystring + var.bar + ".com"
    ## array merge
    #index-file.names = (foo + ".php") + index-file.names
    #index-file.names += (foo + ".php")
    #### include
    #include /etc/lighttpd/lighttpd-inc.conf
    ## same as above if you run: "lighttpd -f /etc/lighttpd/lighttpd.conf"
    #include "lighttpd-inc.conf"
    #### include_shell
    #include_shell "echo var.a=1"
    ## the above is same as:
    #var.a=1
    The site is running over https with a self signed ssl-cert, if that matters. If I try to upload a file, the browser just quickly reloades the page, the filename still in the input field. The file isn't uploaded and the page that the script should display when completed doesn't show neither.
    Does anyone know how to troubleshoot this? I'm not getting any errors, it just doesn't work..

    I haven't used Websphere before so I can't say much about that. Try putting <%@ page language="Java" %> at the top of your jsp page.
    Try putting your java files into a package and see if that helps. I read somewhere that Tomcat once had issues with running classes that weren't in a package. Make sure to put the package statement at the top of your Java files if you do.
    Websphere says it caught an unhandled exception. Instead of having your method throw and Exception put your code in a try-catch block and then print a stack trace to see if it says anything when it trys to read and write data.
    Try{
        PrintWriter pw = new PrintWriter(new BufferedWriter(new FileWriter("doUpload.txt")));
        ServletInputStream in = request.getInputStream();
        int a=0;
        a=in.read();
        while (a!= -1){
            pw.print((char) a);
            a=in.read();
        pw.close();
    }catch(Exception e){
      e.printStackTrace();
    }Sorry I can't really give you more help.
    -S-

  • [Solved]Lighttpd and php/fcgi

    I installed and configured lighttpd and php/fcgi exactly as found http://wiki.archlinux.org/index.php/Lig … nd_Non-SSL except for: ssl and eaccelerator. I am also running php with the lighttpd user instead of phpuser.
    I have done chmod 775 for /var/run/ligghtpd and chown lighttpd -R /var/run/lighttpd and still get these errors.
    2008-05-02 10:14:28: (log.c.75) server started
    2008-05-02 10:14:28: (mod_fastcgi.c.904) bind failed for: unix:/var/run/lighttpd/php-fastcgi.socket-0 Permission denied
    2008-05-02 10:14:28: (mod_fastcgi.c.1340) [ERROR]: spawning fcgi failed.
    2008-05-02 10:14:28: (server.c.908) Configuration of plugins failed. Going down.
    But if I stop /etc/rc.d/spawn-php, and restart my server, everything works perfectly, the phpinfo page, and a basic php include.
    my /etc/php/php.ini
    [PHP]
    ; About php.ini ;
    ; This file controls many aspects of PHP's behavior. In order for PHP to
    ; read it, it must be named 'php.ini'. PHP looks for it in the current
    ; working directory, in the path designated by the environment variable
    ; PHPRC, and in the path that was defined in compile time (in that order).
    ; The path in which the php.ini file is looked for can be overridden using
    ; the -c argument in command line mode.
    ; The syntax of the file is extremely simple. Whitespace and Lines
    ; beginning with a semicolon are silently ignored (as you probably guessed).
    ; Section headers (e.g. [Foo]) are also silently ignored, even though
    ; they might mean something in the future.
    ; Directives are specified using the following syntax:
    ; directive = value
    ; Directive names are *case sensitive* - foo=bar is different from FOO=bar.
    ; The value can be a string, a number, a PHP constant (e.g. E_ALL or M_PI), one
    ; of the INI constants (On, Off, True, False, Yes, No and None) or an expression
    ; (e.g. E_ALL & ~E_NOTICE), or a quoted string ("foo").
    ; Expressions in the INI file are limited to bitwise operators and parentheses:
    ; | bitwise OR
    ; & bitwise AND
    ; ~ bitwise NOT
    ; ! boolean NOT
    ; Boolean flags can be turned on using the values 1, On, True or Yes.
    ; They can be turned off using the values 0, Off, False or No.
    ; An empty string can be denoted by simply not writing anything after the equal
    ; sign, or by using the None keyword:
    ; foo = ; sets foo to an empty string
    ; foo = none ; sets foo to an empty string
    ; foo = "none" ; sets foo to the string 'none'
    ; If you use constants in your value, and these constants belong to a
    ; dynamically loaded extension (either a PHP extension or a Zend extension),
    ; you may only use these constants *after* the line that loads the extension.
    ; About this file ;
    ; This is the recommended, PHP 5-style version of the php.ini-dist file. It
    ; sets some non standard settings, that make PHP more efficient, more secure,
    ; and encourage cleaner coding.
    ; The price is that with these settings, PHP may be incompatible with some
    ; applications, and sometimes, more difficult to develop with. Using this
    ; file is warmly recommended for production sites. As all of the changes from
    ; the standard settings are thoroughly documented, you can go over each one,
    ; and decide whether you want to use it or not.
    ; For general information about the php.ini file, please consult the php.ini-dist
    ; file, included in your PHP distribution.
    ; This file is different from the php.ini-dist file in the fact that it features
    ; different values for several directives, in order to improve performance, while
    ; possibly breaking compatibility with the standard out-of-the-box behavior of
    ; PHP. Please make sure you read what's different, and modify your scripts
    ; accordingly, if you decide to use this file instead.
    ; - register_long_arrays = Off [Performance]
    ; Disables registration of the older (and deprecated) long predefined array
    ; variables ($HTTP_*_VARS). Instead, use the superglobals that were
    ; introduced in PHP 4.1.0
    ; - display_errors = Off [Security]
    ; With this directive set to off, errors that occur during the execution of
    ; scripts will no longer be displayed as a part of the script output, and thus,
    ; will no longer be exposed to remote users. With some errors, the error message
    ; content may expose information about your script, web server, or database
    ; server that may be exploitable for hacking. Production sites should have this
    ; directive set to off.
    ; - log_errors = On [Security]
    ; This directive complements the above one. Any errors that occur during the
    ; execution of your script will be logged (typically, to your server's error log,
    ; but can be configured in several ways). Along with setting display_errors to off,
    ; this setup gives you the ability to fully understand what may have gone wrong,
    ; without exposing any sensitive information to remote users.
    ; - output_buffering = 4096 [Performance]
    ; Set a 4KB output buffer. Enabling output buffering typically results in less
    ; writes, and sometimes less packets sent on the wire, which can often lead to
    ; better performance. The gain this directive actually yields greatly depends
    ; on which Web server you're working with, and what kind of scripts you're using.
    ; - register_argc_argv = Off [Performance]
    ; Disables registration of the somewhat redundant $argv and $argc global
    ; variables.
    ; - magic_quotes_gpc = Off [Performance]
    ; Input data is no longer escaped with slashes so that it can be sent into
    ; SQL databases without further manipulation. Instead, you should use the
    ; function addslashes() on each input element you wish to send to a database.
    ; - variables_order = "GPCS" [Performance]
    ; The environment variables are not hashed into the $_ENV. To access
    ; environment variables, you can use getenv() instead.
    ; - error_reporting = E_ALL [Code Cleanliness, Security(?)]
    ; By default, PHP suppresses errors of type E_NOTICE. These error messages
    ; are emitted for non-critical errors, but that could be a symptom of a bigger
    ; problem. Most notably, this will cause error messages about the use
    ; of uninitialized variables to be displayed.
    ; - allow_call_time_pass_reference = Off [Code cleanliness]
    ; It's not possible to decide to force a variable to be passed by reference
    ; when calling a function. The PHP 4 style to do this is by making the
    ; function require the relevant argument by reference.
    ; - short_open_tag = Off [Portability]
    ; Using short tags is discouraged when developing code meant for redistribution
    ; since short tags may not be supported on the target server.
    ; Language Options ;
    ; Enable the PHP scripting language engine under Apache.
    engine = On
    ; Enable compatibility mode with Zend Engine 1 (PHP 4.x)
    zend.ze1_compatibility_mode = Off
    ; Allow the <? tag. Otherwise, only <?php and <script> tags are recognized.
    ; NOTE: Using short tags should be avoided when developing applications or
    ; libraries that are meant for redistribution, or deployment on PHP
    ; servers which are not under your control, because short tags may not
    ; be supported on the target server. For portable, redistributable code,
    ; be sure not to use short tags.
    short_open_tag = Off
    ; Allow ASP-style <% %> tags.
    asp_tags = Off
    ; The number of significant digits displayed in floating point numbers.
    precision = 14
    ; Enforce year 2000 compliance (will cause problems with non-compliant browsers)
    y2k_compliance = On
    ; Output buffering allows you to send header lines (including cookies) even
    ; after you send body content, at the price of slowing PHP's output layer a
    ; bit. You can enable output buffering during runtime by calling the output
    ; buffering functions. You can also enable output buffering for all files by
    ; setting this directive to On. If you wish to limit the size of the buffer
    ; to a certain size - you can use a maximum number of bytes instead of 'On', as
    ; a value for this directive (e.g., output_buffering=4096).
    output_buffering = 4096
    ; You can redirect all of the output of your scripts to a function. For
    ; example, if you set output_handler to "mb_output_handler", character
    ; encoding will be transparently converted to the specified encoding.
    ; Setting any output handler automatically turns on output buffering.
    ; Note: People who wrote portable scripts should not depend on this ini
    ; directive. Instead, explicitly set the output handler using ob_start().
    ; Using this ini directive may cause problems unless you know what script
    ; is doing.
    ; Note: You cannot use both "mb_output_handler" with "ob_iconv_handler"
    ; and you cannot use both "ob_gzhandler" and "zlib.output_compression".
    ; Note: output_handler must be empty if this is set 'On' !!!!
    ; Instead you must use zlib.output_handler.
    ;output_handler =
    ; Transparent output compression using the zlib library
    ; Valid values for this option are 'off', 'on', or a specific buffer size
    ; to be used for compression (default is 4KB)
    ; Note: Resulting chunk size may vary due to nature of compression. PHP
    ; outputs chunks that are few hundreds bytes each as a result of
    ; compression. If you prefer a larger chunk size for better
    ; performance, enable output_buffering in addition.
    ; Note: You need to use zlib.output_handler instead of the standard
    ; output_handler, or otherwise the output will be corrupted.
    zlib.output_compression = On
    ;zlib.output_compression_level = -1
    ; You cannot specify additional output handlers if zlib.output_compression
    ; is activated here. This setting does the same as output_handler but in
    ; a different order.
    ;zlib.output_handler =
    ; Implicit flush tells PHP to tell the output layer to flush itself
    ; automatically after every output block. This is equivalent to calling the
    ; PHP function flush() after each and every call to print() or echo() and each
    ; and every HTML block. Turning this option on has serious performance
    ; implications and is generally recommended for debugging purposes only.
    implicit_flush = Off
    ; The unserialize callback function will be called (with the undefined class'
    ; name as parameter), if the unserializer finds an undefined class
    ; which should be instantiated.
    ; A warning appears if the specified function is not defined, or if the
    ; function doesn't include/implement the missing class.
    ; So only set this entry, if you really want to implement such a
    ; callback-function.
    unserialize_callback_func=
    ; When floats & doubles are serialized store serialize_precision significant
    ; digits after the floating point. The default value ensures that when floats
    ; are decoded with unserialize, the data will remain the same.
    serialize_precision = 100
    ; Whether to enable the ability to force arguments to be passed by reference
    ; at function call time. This method is deprecated and is likely to be
    ; unsupported in future versions of PHP/Zend. The encouraged method of
    ; specifying which arguments should be passed by reference is in the function
    ; declaration. You're encouraged to try and turn this option Off and make
    ; sure your scripts work properly with it in order to ensure they will work
    ; with future versions of the language (you will receive a warning each time
    ; you use this feature, and the argument will be passed by value instead of by
    ; reference).
    allow_call_time_pass_reference = Off
    ; Safe Mode
    safe_mode = Off
    ; By default, Safe Mode does a UID compare check when
    ; opening files. If you want to relax this to a GID compare,
    ; then turn on safe_mode_gid.
    safe_mode_gid = Off
    ; When safe_mode is on, UID/GID checks are bypassed when
    ; including files from this directory and its subdirectories.
    ; (directory must also be in include_path or full path must
    ; be used when including)
    safe_mode_include_dir =
    ; When safe_mode is on, only executables located in the safe_mode_exec_dir
    ; will be allowed to be executed via the exec family of functions.
    safe_mode_exec_dir =
    ; Setting certain environment variables may be a potential security breach.
    ; This directive contains a comma-delimited list of prefixes. In Safe Mode,
    ; the user may only alter environment variables whose names begin with the
    ; prefixes supplied here. By default, users will only be able to set
    ; environment variables that begin with PHP_ (e.g. PHP_FOO=BAR).
    ; Note: If this directive is empty, PHP will let the user modify ANY
    ; environment variable!
    safe_mode_allowed_env_vars = PHP_
    ; This directive contains a comma-delimited list of environment variables that
    ; the end user won't be able to change using putenv(). These variables will be
    ; protected even if safe_mode_allowed_env_vars is set to allow to change them.
    safe_mode_protected_env_vars = LD_LIBRARY_PATH
    ; open_basedir, if set, limits all file operations to the defined directory
    ; and below. This directive makes most sense if used in a per-directory
    ; or per-virtualhost web server configuration file. This directive is
    ; *NOT* affected by whether Safe Mode is turned On or Off.
    open_basedir = /home/:/tmp/:/usr/share/pear/
    ; This directive allows you to disable certain functions for security reasons.
    ; It receives a comma-delimited list of function names. This directive is
    ; *NOT* affected by whether Safe Mode is turned On or Off.
    disable_functions =
    ; This directive allows you to disable certain classes for security reasons.
    ; It receives a comma-delimited list of class names. This directive is
    ; *NOT* affected by whether Safe Mode is turned On or Off.
    disable_classes =
    ; Colors for Syntax Highlighting mode. Anything that's acceptable in
    ; <span style="color: ???????"> would work.
    ;highlight.string = #DD0000
    ;highlight.comment = #FF9900
    ;highlight.keyword = #007700
    ;highlight.bg = #FFFFFF
    ;highlight.default = #0000BB
    ;highlight.html = #000000
    ; If enabled, the request will be allowed to complete even if the user aborts
    ; the request. Consider enabling it if executing long request, which may end up
    ; being interrupted by the user or a browser timing out.
    ; ignore_user_abort = On
    ; Determines the size of the realpath cache to be used by PHP. This value should
    ; be increased on systems where PHP opens many files to reflect the quantity of
    ; the file operations performed.
    ; realpath_cache_size=16k
    ; Duration of time, in seconds for which to cache realpath information for a given
    ; file or directory. For systems with rarely changing files, consider increasing this
    ; value.
    ; realpath_cache_ttl=120
    ; Misc
    ; Decides whether PHP may expose the fact that it is installed on the server
    ; (e.g. by adding its signature to the Web server header). It is no security
    ; threat in any way, but it makes it possible to determine whether you use PHP
    ; on your server or not.
    expose_php = Off
    ; Resource Limits ;
    max_execution_time = 30 ; Maximum execution time of each script, in seconds
    max_input_time = 60 ; Maximum amount of time each script may spend parsing request data
    ;max_input_nesting_level = 64 ; Maximum input variable nesting level
    memory_limit = 32M ; Maximum amount of memory a script may consume (32MB)
    ; Error handling and logging ;
    ; error_reporting is a bit-field. Or each number up to get desired error
    ; reporting level
    ; E_ALL - All errors and warnings (doesn't include E_STRICT)
    ; E_ERROR - fatal run-time errors
    ; E_RECOVERABLE_ERROR - almost fatal run-time errors
    ; E_WARNING - run-time warnings (non-fatal errors)
    ; E_PARSE - compile-time parse errors
    ; E_NOTICE - run-time notices (these are warnings which often result
    ; from a bug in your code, but it's possible that it was
    ; intentional (e.g., using an uninitialized variable and
    ; relying on the fact it's automatically initialized to an
    ; empty string)
    ; E_STRICT - run-time notices, enable to have PHP suggest changes
    ; to your code which will ensure the best interoperability
    ; and forward compatibility of your code
    ; E_CORE_ERROR - fatal errors that occur during PHP's initial startup
    ; E_CORE_WARNING - warnings (non-fatal errors) that occur during PHP's
    ; initial startup
    ; E_COMPILE_ERROR - fatal compile-time errors
    ; E_COMPILE_WARNING - compile-time warnings (non-fatal errors)
    ; E_USER_ERROR - user-generated error message
    ; E_USER_WARNING - user-generated warning message
    ; E_USER_NOTICE - user-generated notice message
    ; Examples:
    ; - Show all errors, except for notices and coding standards warnings
    ;error_reporting = E_ALL & ~E_NOTICE
    ; - Show all errors, except for notices
    ;error_reporting = E_ALL & ~E_NOTICE | E_STRICT
    ; - Show only errors
    ;error_reporting = E_COMPILE_ERROR|E_RECOVERABLE_ERROR|E_ERROR|E_CORE_ERROR
    ; - Show all errors, except coding standards warnings
    error_reporting = E_ALL
    ; Print out errors (as a part of the output). For production web sites,
    ; you're strongly encouraged to turn this feature off, and use error logging
    ; instead (see below). Keeping display_errors enabled on a production web site
    ; may reveal security information to end users, such as file paths on your Web
    ; server, your database schema or other information.
    ; possible values for display_errors:
    ; Off - Do not display any errors
    ; stderr - Display errors to STDERR (affects only CGI/CLI binaries!)
    ; On or stdout - Display errors to STDOUT (default)
    ; To output errors to STDERR with CGI/CLI:
    ;display_errors = "stderr"
    ; Default
    display_errors = Off
    ; Even when display_errors is on, errors that occur during PHP's startup
    ; sequence are not displayed. It's strongly recommended to keep
    ; display_startup_errors off, except for when debugging.
    display_startup_errors = Off
    ; Log errors into a log file (server-specific log, stderr, or error_log (below))
    ; As stated above, you're strongly advised to use error logging in place of
    ; error displaying on production web sites.
    log_errors = On
    ; Set maximum length of log_errors. In error_log information about the source is
    ; added. The default is 1024 and 0 allows to not apply any maximum length at all.
    log_errors_max_len = 1024
    ; Do not log repeated messages. Repeated errors must occur in same file on same
    ; line until ignore_repeated_source is set true.
    ignore_repeated_errors = Off
    ; Ignore source of message when ignoring repeated messages. When this setting
    ; is On you will not log errors with repeated messages from different files or
    ; source lines.
    ignore_repeated_source = Off
    ; If this parameter is set to Off, then memory leaks will not be shown (on
    ; stdout or in the log). This has only effect in a debug compile, and if
    ; error reporting includes E_WARNING in the allowed list
    report_memleaks = Off
    ;report_zend_debug = 0
    ; Store the last error/warning message in $php_errormsg (boolean).
    track_errors = Off
    ; Disable the inclusion of HTML tags in error messages.
    ; Note: Never use this feature for production boxes.
    ;html_errors = Off
    ; If html_errors is set On PHP produces clickable error messages that direct
    ; to a page describing the error or function causing the error in detail.
    ; You can download a copy of the PHP manual from http://www.php.net/docs.php
    ; and change docref_root to the base URL of your local copy including the
    ; leading '/'. You must also specify the file extension being used including
    ; the dot.
    ; Note: Never use this feature for production boxes.
    ;docref_root = "/phpmanual/"
    ;docref_ext = .html
    ; String to output before an error message.
    ;error_prepend_string = "<font color=ff0000>"
    ; String to output after an error message.
    ;error_append_string = "</font>"
    ; Log errors to specified file.
    ;error_log = filename
    ; Log errors to syslog.
    error_log = syslog
    ; Data Handling ;
    ; Note - track_vars is ALWAYS enabled as of PHP 4.0.3
    ; The separator used in PHP generated URLs to separate arguments.
    ; Default is "&".
    ;arg_separator.output = "&"
    ; List of separator(s) used by PHP to parse input URLs into variables.
    ; Default is "&".
    ; NOTE: Every character in this directive is considered as separator!
    ;arg_separator.input = ";&"
    ; This directive describes the order in which PHP registers GET, POST, Cookie,
    ; Environment and Built-in variables (G, P, C, E & S respectively, often
    ; referred to as EGPCS or GPC). Registration is done from left to right, newer
    ; values override older values.
    variables_order = "GPCS"
    ; Whether or not to register the EGPCS variables as global variables. You may
    ; want to turn this off if you don't want to clutter your scripts' global scope
    ; with user data. This makes most sense when coupled with track_vars - in which
    ; case you can access all of the GPC variables through the $HTTP_*_VARS[],
    ; variables.
    ; You should do your best to write your scripts so that they do not require
    ; register_globals to be on; Using form variables as globals can easily lead
    ; to possible security problems, if the code is not very well thought of.
    register_globals = Off
    ; Whether or not to register the old-style input arrays, HTTP_GET_VARS
    ; and friends. If you're not using them, it's recommended to turn them off,
    ; for performance reasons.
    register_long_arrays = Off
    ; This directive tells PHP whether to declare the argv&argc variables (that
    ; would contain the GET information). If you don't use these variables, you
    ; should turn it off for increased performance.
    register_argc_argv = Off
    ; When enabled, the SERVER and ENV variables are created when they're first
    ; used (Just In Time) instead of when the script starts. If these variables
    ; are not used within a script, having this directive on will result in a
    ; performance gain. The PHP directives register_globals, register_long_arrays,
    ; and register_argc_argv must be disabled for this directive to have any affect.
    auto_globals_jit = On
    ; Maximum size of POST data that PHP will accept.
    post_max_size = 8M
    ; Magic quotes
    ; Magic quotes for incoming GET/POST/Cookie data.
    magic_quotes_gpc = Off
    ; Magic quotes for runtime-generated data, e.g. data from SQL, from exec(), etc.
    magic_quotes_runtime = Off
    ; Use Sybase-style magic quotes (escape ' with '' instead of \').
    magic_quotes_sybase = Off
    ; Automatically add files before or after any PHP document.
    auto_prepend_file =
    auto_append_file =
    ; As of 4.0b4, PHP always outputs a character encoding by default in
    ; the Content-type: header. To disable sending of the charset, simply
    ; set it to be empty.
    ; PHP's built-in default is text/html
    default_mimetype = "text/html"
    ;default_charset = "iso-8859-1"
    ; Always populate the $HTTP_RAW_POST_DATA variable.
    ;always_populate_raw_post_data = On
    ; Paths and Directories ;
    ; UNIX: "/path1:/path2"
    include_path = ".:/usr/share/pear"
    ; The root of the PHP pages, used only if nonempty.
    ; if PHP was not compiled with FORCE_REDIRECT, you SHOULD set doc_root
    ; if you are running php as a CGI under any web server (other than IIS)
    ; see documentation for security issues. The alternate is to use the
    ; cgi.force_redirect configuration below
    doc_root =
    ; The directory under which PHP opens the script using /~username used only
    ; if nonempty.
    user_dir =
    ; Directory in which the loadable extensions (modules) reside.
    extension_dir = "/usr/lib/php/20060613/"
    ; Whether or not to enable the dl() function. The dl() function does NOT work
    ; properly in multithreaded servers, such as IIS or Zeus, and is automatically
    ; disabled on them.
    enable_dl = Off
    ; cgi.force_redirect is necessary to provide security running PHP as a CGI under
    ; most web servers. Left undefined, PHP turns this on by default. You can
    ; turn it off here AT YOUR OWN RISK
    ; **You CAN safely turn this off for IIS, in fact, you MUST.**
    ; cgi.force_redirect = 1
    ; if cgi.nph is enabled it will force cgi to always sent Status: 200 with
    ; every request.
    ; cgi.nph = 1
    ; if cgi.force_redirect is turned on, and you are not running under Apache or Netscape
    ; (iPlanet) web servers, you MAY need to set an environment variable name that PHP
    ; will look for to know it is OK to continue execution. Setting this variable MAY
    ; cause security issues, KNOW WHAT YOU ARE DOING FIRST.
    ; cgi.redirect_status_env = ;
    ; cgi.fix_pathinfo provides *real* PATH_INFO/PATH_TRANSLATED support for CGI. PHP's
    ; previous behaviour was to set PATH_TRANSLATED to SCRIPT_FILENAME, and to not grok
    ; what PATH_INFO is. For more information on PATH_INFO, see the cgi specs. Setting
    ; this to 1 will cause PHP CGI to fix it's paths to conform to the spec. A setting
    ; of zero causes PHP to behave as before. Default is 1. You should fix your scripts
    ; to use SCRIPT_FILENAME rather than PATH_TRANSLATED.
    cgi.fix_pathinfo=1
    ; FastCGI under IIS (on WINNT based OS) supports the ability to impersonate
    ; security tokens of the calling client. This allows IIS to define the
    ; security context that the request runs under. mod_fastcgi under Apache
    ; does not currently support this feature (03/17/2002)
    ; Set to 1 if running under IIS. Default is zero.
    ; fastcgi.impersonate = 1;
    ; Disable logging through FastCGI connection
    ; fastcgi.logging = 0
    ; cgi.rfc2616_headers configuration option tells PHP what type of headers to
    ; use when sending HTTP response code. If it's set 0 PHP sends Status: header that
    ; is supported by Apache. When this option is set to 1 PHP will send
    ; RFC2616 compliant header.
    ; Default is zero.
    ;cgi.rfc2616_headers = 0
    ; File Uploads ;
    ; Whether to allow HTTP file uploads.
    file_uploads = On
    ; Temporary directory for HTTP uploaded files (will use system default if not
    ; specified).
    ;upload_tmp_dir =
    ; Maximum allowed size for uploaded files.
    upload_max_filesize = 2M
    ; Fopen wrappers ;
    ; Whether to allow the treatment of URLs (like http:// or ftp://) as files.
    allow_url_fopen = Off
    ; Whether to allow include/require to open URLs (like http:// or ftp://) as files.
    allow_url_include = Off
    ; Define the anonymous ftp password (your email address)
    ;from="[email protected]"
    ; Define the User-Agent string
    ; user_agent="PHP"
    ; Default timeout for socket based streams (seconds)
    default_socket_timeout = 60
    ; Dynamic Extensions ;
    ; If you wish to have an extension loaded automatically, use the following
    ; syntax:
    ; extension=modulename.extension
    ; For example, under UNIX:
    ; extension=msql.so
    ; Note that it should be the name of the module only; no directory information
    ; needs to go here. Specify the location of the extension with the
    ; extension_dir directive above.
    ; Module Settings ;
    [Date]
    ; Defines the default timezone used by the date functions
    ;date.timezone =
    ;date.default_latitude = 31.7667
    ;date.default_longitude = 35.2333
    ;date.sunrise_zenith = 90.583333
    ;date.sunset_zenith = 90.583333
    [filter]
    ;filter.default = unsafe_raw
    ;filter.default_flags =
    [iconv]
    ;iconv.input_encoding = ISO-8859-1
    ;iconv.internal_encoding = ISO-8859-1
    ;iconv.output_encoding = ISO-8859-1
    [sqlite]
    ;sqlite.assoc_case = 0
    [xmlrpc]
    ;xmlrpc_error_number = 0
    ;xmlrpc_errors = 0
    [Pcre]
    ;PCRE library backtracking limit.
    ;pcre.backtrack_limit=100000
    ;PCRE library recursion limit.
    ;Please note that if you set this value to a high number you may consume all
    ;the available process stack and eventually crash PHP (due to reaching the
    ;stack size limit imposed by the Operating System).
    ;pcre.recursion_limit=100000
    [Syslog]
    ; Whether or not to define the various syslog variables (e.g. $LOG_PID,
    ; $LOG_CRON, etc.). Turning it off is a good idea performance-wise. In
    ; runtime, you can define these variables by calling define_syslog_variables().
    define_syslog_variables = Off
    [mail function]
    ; For Unix only. You may supply arguments as well (default: "sendmail -t -i").
    ;sendmail_path =
    ; Force the addition of the specified parameters to be passed as extra parameters
    ; to the sendmail binary. These parameters will always replace the value of
    ; the 5th parameter to mail(), even in safe mode.
    ;mail.force_extra_parameters =
    [SQL]
    sql.safe_mode = Off
    [ODBC]
    ;odbc.default_db = Not yet implemented
    ;odbc.default_user = Not yet implemented
    ;odbc.default_pw = Not yet implemented
    ; Allow or prevent persistent links.
    odbc.allow_persistent = On
    ; Check that a connection is still valid before reuse.
    odbc.check_persistent = On
    ; Maximum number of persistent links. -1 means no limit.
    odbc.max_persistent = -1
    ; Maximum number of links (persistent + non-persistent). -1 means no limit.
    odbc.max_links = -1
    ; Handling of LONG fields. Returns number of bytes to variables. 0 means
    ; passthru.
    odbc.defaultlrl = 4096
    ; Handling of binary data. 0 means passthru, 1 return as is, 2 convert to char.
    ; See the documentation on odbc_binmode and odbc_longreadlen for an explanation
    ; of uodbc.defaultlrl and uodbc.defaultbinmode
    odbc.defaultbinmode = 1
    [MySQL]
    ; Allow or prevent persistent links.
    mysql.allow_persistent = On
    ; Maximum number of persistent links. -1 means no limit.
    mysql.max_persistent = -1
    ; Maximum number of links (persistent + non-persistent). -1 means no limit.
    mysql.max_links = -1
    ; Default port number for mysql_connect(). If unset, mysql_connect() will use
    ; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the
    ; compile-time value defined MYSQL_PORT (in that order).
    mysql.default_port =
    ; Default socket name for local MySQL connects. If empty, uses the built-in
    ; MySQL defaults.
    mysql.default_socket =
    ; Default host for mysql_connect() (doesn't apply in safe mode).
    mysql.default_host =
    ; Default user for mysql_connect() (doesn't apply in safe mode).
    mysql.default_user =
    ; Default password for mysql_connect() (doesn't apply in safe mode).
    ; Note that this is generally a *bad* idea to store passwords in this file.
    ; *Any* user with PHP access can run 'echo get_cfg_var("mysql.default_password")
    ; and reveal this password! And of course, any users with read access to this
    ; file will be able to reveal the password as well.
    mysql.default_password =
    ; Maximum time (in seconds) for connect timeout. -1 means no limit
    mysql.connect_timeout = 60
    ; Trace mode. When trace_mode is active (=On), warnings for table/index scans and
    ; SQL-Errors will be displayed.
    mysql.trace_mode = Off
    [MySQLi]
    ; Maximum number of links. -1 means no limit.
    mysqli.max_links = -1
    ; Default port number for mysqli_connect(). If unset, mysqli_connect() will use
    ; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the
    ; compile-time value defined MYSQL_PORT (in that order).
    mysqli.default_port = 3306
    ; Default socket name for local MySQL connects. If empty, uses the built-in
    ; MySQL defaults.
    mysqli.default_socket =
    ; Default host for mysql_connect() (doesn't apply in safe mode).
    mysqli.default_host =
    ; Default user for mysql_connect() (doesn't apply in safe mode).
    mysqli.default_user =
    ; Default password for mysqli_connect() (doesn't apply in safe mode).
    ; Note that this is generally a *bad* idea to store passwords in this file.
    ; *Any* user with PHP access can run 'echo get_cfg_var("mysqli.default_pw")
    ; and reveal this password! And of course, any users with read access to this
    ; file will be able to reveal the password as well.
    mysqli.default_pw =
    ; Allow or prevent reconnect
    mysqli.reconnect = Off
    [mSQL]
    ; Allow or prevent persistent links.
    msql.allow_persistent = On
    ; Maximum number of persistent links. -1 means no limit.
    msql.max_persistent = -1
    ; Maximum number of links (persistent+non persistent). -1 means no limit.
    msql.max_links = -1
    [OCI8]
    ; enables privileged connections using external credentials (OCI_SYSOPER, OCI_SYSDBA)
    ;oci8.privileged_connect = Off
    ; Connection: The maximum number of persistent OCI8 connections per
    ; process. Using -1 means no limit.
    ;oci8.max_persistent = -1
    ; Connection: The maximum number of seconds a process is allowed to
    ; maintain an idle persistent connection. Using -1 means idle
    ; persistent connections will be maintained forever.
    ;oci8.persistent_timeout = -1
    ; Connection: The number of seconds that must pass before issuing a
    ; ping during oci_pconnect() to check the connection validity. When
    ; set to 0, each oci_pconnect() will cause a ping. Using -1 disables
    ; pings completely.
    ;oci8.ping_interval = 60
    ; Tuning: This option enables statement caching, and specifies how
    ; many statements to cache. Using 0 disables statement caching.
    ;oci8.statement_cache_size = 20
    ; Tuning: Enables statement prefetching and sets the default number of
    ; rows that will be fetched automatically after statement execution.
    ;oci8.default_prefetch = 10
    ; Compatibility. Using On means oci_close() will not close
    ; oci_connect() and oci_new_connect() connections.
    ;oci8.old_oci_close_semantics = Off
    [PostgresSQL]
    ; Allow or prevent persistent links.
    pgsql.allow_persistent = On
    ; Detect broken persistent links always with pg_pconnect().
    ; Auto reset feature requires a little overheads.
    pgsql.auto_reset_persistent = Off
    ; Maximum number of persistent links. -1 means no limit.
    pgsql.max_persistent = -1
    ; Maximum number of links (persistent+non persistent). -1 means no limit.
    pgsql.max_links = -1
    ; Ignore PostgreSQL backends Notice message or not.
    ; Notice message logging require a little overheads.
    pgsql.ignore_notice = 0
    ; Log PostgreSQL backends Noitce message or not.
    ; Unless pgsql.ignore_notice=0, module cannot log notice message.
    pgsql.log_notice = 0
    [Sybase]
    ; Allow or prevent persistent links.
    sybase.allow_persistent = On
    ; Maximum number of persistent links. -1 means no limit.
    sybase.max_persistent = -1
    ; Maximum number of links (persistent + non-persistent). -1 means no limit.
    sybase.max_links = -1
    ;sybase.interface_file = "/usr/sybase/interfaces"
    ; Minimum error severity to display.
    sybase.min_error_severity = 10
    ; Minimum message severity to display.
    sybase.min_message_severity = 10
    ; Compatibility mode with old versions of PHP 3.0.
    ; If on, this will cause PHP to automatically assign types to results according
    ; to their Sybase type, instead of treating them all as strings. This
    ; compatibility mode will probably not stay around forever, so try applying
    ; whatever necessary changes to your code, and turn it off.
    sybase.compatability_mode = Off
    [Sybase-CT]
    ; Allow or prevent persistent links.
    sybct.allow_persistent = On
    ; Maximum number of persistent links. -1 means no limit.
    sybct.max_persistent = -1
    ; Maximum number of links (persistent + non-persistent). -1 means no limit.
    sybct.max_links = -1
    ; Minimum server message severity to display.
    sybct.min_server_severity = 10
    ; Minimum client message severity to display.
    sybct.min_client_severity = 10
    [bcmath]
    ; Number of decimal digits for all bcmath functions.
    bcmath.scale = 0
    [browscap]
    ;browscap = extra/browscap.ini
    [Informix]
    ; Default host for ifx_connect() (doesn't apply in safe mode).
    ifx.default_host =
    ; Default user for ifx_connect() (doesn't apply in safe mode).
    ifx.default_user =
    ; Default password for ifx_connect() (doesn't apply in safe mode).
    ifx.default_password =
    ; Allow or prevent persistent links.
    ifx.allow_persistent = On
    ; Maximum number of persistent links. -1 means no limit.
    ifx.max_persistent = -1
    ; Maximum number of links (persistent + non-persistent). -1 means no limit.
    ifx.max_links = -1
    ; If on, select statements return the contents of a text blob instead of its id.
    ifx.textasvarchar = 0
    ; If on, select statements return the contents of a byte blob instead of its id.
    ifx.byteasvarchar = 0
    ; Trailing blanks are stripped from fixed-length char columns. May help the
    ; life of Informix SE users.
    ifx.charasvarchar = 0
    ; If on, the contents of text and byte blobs are dumped to a file instead of
    ; keeping them in memory.
    ifx.blobinfile = 0
    ; NULL's are returned as empty strings, unless this is set to 1. In that case,
    ; NULL's are returned as string 'NULL'.
    ifx.nullformat = 0
    [Session]
    ; Handler used to store/retrieve data.
    session.save_handler = files
    ; Argument passed to save_handler. In the case of files, this is the path
    ; where data files are stored.
    ; As of PHP 4.0.1, you can define the path as:
    ; session.save_path = "N;/path"
    ; where N is an integer. Instead of storing all the session files in
    ; /path, what this will do is use subdirectories N-levels deep, and
    ; store the session data in those directories. This is useful if you
    ; or your OS have problems with lots of files in one directory, and is
    ; a more efficient layout for servers that handle lots of sessions.
    ; NOTE 1: PHP will not create this directory structure automatically.
    ; You can use the script in the ext/session dir for that purpose.
    ; NOTE 2: See the section on garbage collection below if you choose to
    ; use subdirectories for session storage
    ; The file storage module creates files using mode 600 by default.
    ; You can change that by using
    ; session.save_path = "N;MODE;/path"
    ; where MODE is the octal representation of the mode. Note that this
    ; does not overwrite the process's umask.
    session.save_path = "/tmp"
    ; Whether to use cookies.
    session.use_cookies = 1
    ;session.cookie_secure =
    ; This option enables administrators to make their users invulnerable to
    ; attacks which involve passing session ids in URLs; defaults to 0.
    ; session.use_only_cookies = 1
    ; Name of the session (used as cookie name).
    session.name = PHPSESSID
    ; Initialize session on request startup.
    session.auto_start = 0
    ; Lifetime in seconds of cookie or, if 0, until browser is restarted.
    session.cookie_lifetime = 0
    ; The path for which the cookie is valid.
    session.cookie_path = /
    ; The domain for which the cookie is valid.
    session.cookie_domain =
    ; Whether or not to add the httpOnly flag to the cookie, which makes it inaccessible to browser scripting languages such as JavaScript.
    session.cookie_httponly =
    ; Handler used to serialize data. php is the standard serializer of PHP.
    session.serialize_handler = php
    ; Define the probability that the 'garbage collection' process is started
    ; on every session initialization.
    ; The probability is calculated by using gc_probability/gc_divisor,
    ; e.g. 1/100 means there is a 1% chance that the GC process starts
    ; on each request.
    session.gc_probability = 1
    session.gc_divisor = 1000
    ; After this number of seconds, stored data will be seen as 'garbage' and
    ; cleaned up by the garbage collection process.
    session.gc_maxlifetime = 1440
    ; NOTE: If you are using the subdirectory option for storing session files
    ; (see session.save_path above), then garbage collection does *not*
    ; happen automatically. You will need to do your own garbage
    ; collection through a shell script, cron entry, or some other method.
    ; For example, the following script would is the equivalent of
    ; setting session.gc_maxlifetime to 1440 (1440 seconds = 24 minutes):
    ; cd /path/to/sessions; find -cmin +24 | xargs rm
    ; PHP 4.2 and less have an undocumented feature/bug that allows you to
    ; to initialize a session variable in the global scope, albeit register_globals
    ; is disabled. PHP 4.3 and later will warn you, if this feature is used.
    ; You can disable the feature and the warning separately. At this time,
    ; the warning is only displayed, if bug_compat_42 is enabled.
    session.bug_compat_42 = 0
    session.bug_compat_warn = 1
    ; Check HTTP Referer to invalidate externally stored URLs containing ids.
    ; HTTP_REFERER has to contain this substring for the session to be
    ; considered as valid.
    session.referer_check =
    ; How many bytes to read from the file.
    session.entropy_length = 0
    ; Specified here to create the session id.
    session.entropy_file =
    ;session.entropy_length = 16
    ;session.entropy_file = /dev/urandom
    ; Set to {nocache,private,public,} to determine HTTP caching aspects
    ; or leave this empty to avoid sending anti-caching headers.
    session.cache_limiter = nocache
    ; Document expires after n minutes.
    session.cache_expire = 180
    ; trans sid support is disabled by default.
    ; Use of trans sid may risk your users security.
    ; Use this option with caution.
    ; - User may send URL contains active session ID
    ; to other person via. email/irc/etc.
    ; - URL that contains active session ID may be stored
    ; in publically accessible computer.
    ; - User may access your site with the same session ID
    ; always using URL stored in browser's history or bookmarks.
    session.use_trans_sid = 0
    ; Select a hash function
    ; 0: MD5 (128 bits)
    ; 1: SHA-1 (160 bits)
    session.hash_function = 0
    ; Define how many bits are stored in each character when converting
    ; the binary hash data to something readable.
    ; 4 bits: 0-9, a-f
    ; 5 bits: 0-9, a-v
    ; 6 bits: 0-9, a-z, A-Z, "-", ","
    session.hash_bits_per_character = 5
    ; The URL rewriter will look for URLs in a defined set of HTML tags.
    ; form/fieldset are special; if you include them here, the rewriter will
    ; add a hidden <input> field with the info which is otherwise appended
    ; to URLs. If you want XHTML conformity, remove the form entry.
    ; Note that all valid entries require a "=", even if no value follows.
    url_rewriter.tags = "a=href,area=href,frame=src,input=src,form=fakeentry"
    [MSSQL]
    ; Allow or prevent persistent links.
    mssql.allow_persistent = On
    ; Maximum number of persistent links. -1 means no limit.
    mssql.max_persistent = -1
    ; Maximum number of links (persistent+non persistent). -1 means no limit.
    mssql.max_links = -1
    ; Minimum error severity to display.
    mssql.min_error_severity = 10
    ; Minimum message severity to display.
    mssql.min_message_severity = 10
    ; Compatibility mode with old versions of PHP 3.0.
    mssql.compatability_mode = Off
    ; Connect timeout
    ;mssql.connect_timeout = 5
    ; Query timeout
    ;mssql.timeout = 60
    ; Valid range 0 - 2147483647. Default = 4096.
    ;mssql.textlimit = 4096
    ; Valid range 0 - 2147483647. Default = 4096.
    ;mssql.textsize = 4096
    ; Limits the number of records in each batch. 0 = all records in one batch.
    ;mssql.batchsize = 0
    ; Specify how datetime and datetim4 columns are returned
    ; On => Returns data converted to SQL server settings
    ; Off => Returns values as YYYY-MM-DD hh:mm:ss
    ;mssql.datetimeconvert = On
    ; Use NT authentication when connecting to the server
    mssql.secure_connection = Off
    ; Specify max number of processes. -1 = library default
    ; msdlib defaults to 25
    ; FreeTDS defaults to 4096
    ;mssql.max_procs = -1
    ; Specify client character set.
    ; If empty or not set the client charset from freetds.comf is used
    ; This is only used when compiled with FreeTDS
    ;mssql.charset = "ISO-8859-1"
    [Assertion]
    ; Assert(expr); active by default.
    ;assert.active = On
    ; Issue a PHP warning for each failed assertion.
    ;assert.warning = On
    ; Don't bail out by default.
    ;assert.bail = Off
    ; User-function to be called if an assertion fails.
    ;assert.callback = 0
    ; Eval the expression with current error_reporting(). Set to true if you want
    ; error_reporting(0) around the eval().
    ;assert.quiet_eval = 0
    [COM]
    ; path to a file containing GUIDs, IIDs or filenames of files with TypeLibs
    ;com.typelib_file =
    ; allow Distributed-COM calls
    ;com.allow_dcom = true
    ; autoregister constants of a components typlib on com_load()
    ;com.autoregister_typelib = true
    ; register constants casesensitive
    ;com.autoregister_casesensitive = false
    ; show warnings on duplicate constant registrations
    ;com.autoregister_verbose = true
    [mbstring]
    ; language for internal character representation.
    ;mbstring.language = Japanese
    ; internal/script encoding.
    ; Some encoding cannot work as internal encoding.
    ; (e.g. SJIS, BIG5, ISO-2022-*)
    ;mbstring.internal_encoding = EUC-JP
    ; http input encoding.
    ;mbstring.http_input = auto
    ; http output encoding. mb_output_handler must be
    ; registered as output buffer to function
    ;mbstring.http_output = SJIS
    ; enable automatic encoding translation according to
    ; mbstring.internal_encoding setting. Input chars are
    ; converted to internal encoding by setting this to On.
    ; Note: Do _not_ use automatic encoding translation for
    ; portable libs/applications.
    ;mbstring.encoding_translation = Off
    ; automatic encoding detection order.
    ; auto means
    ;mbstring.detect_order = auto
    ; substitute_character used when character cannot be converted
    ; one from another
    ;mbstring.substitute_character = none;
    ; overload(replace) single byte functions by mbstring functions.
    ; mail(), ereg(), etc are overloaded by mb_send_mail(), mb_ereg(),
    ; etc. Possible values are 0,1,2,4 or combination of them.
    ; For example, 7 for overload everything.
    ; 0: No overload
    ; 1: Overload mail() function
    ; 2: Overload str*() functions
    ; 4: Overload ereg*() functions
    ;mbstring.func_overload = 0
    ; enable strict encoding detection.
    ;mbstring.strict_encoding = Off
    [FrontBase]
    ;fbsql.allow_persistent = On
    ;fbsql.autocommit = On
    ;fbsql.show_timestamp_decimals = Off
    ;fbsql.default_database =
    ;fbsql.default_database_password =
    ;fbsql.default_host =
    ;fbsql.default_password =
    ;fbsql.default_user = "_SYSTEM"
    ;fbsql.generate_warnings = Off
    ;fbsql.max_connections = 128
    ;fbsql.max_links = 128
    ;fbsql.max_persistent = -1
    ;fbsql.max_results = 128
    [gd]
    ; Tell the jpeg decode to libjpeg warnings and try to create
    ; a gd image. The warning will then be displayed as notices
    ; disabled by default
    ;gd.jpeg_ignore_warning = 0
    [exif]
    ; Exif UNICODE user comments are handled as UCS-2BE/UCS-2LE and JIS as JIS.
    ; With mbstring support this will automatically be converted into the encoding
    ; given by corresponding encode setting. When empty mbstring.internal_encoding
    ; is used. For the decode settings you can distinguish between motorola and
    ; intel byte order. A decode setting cannot be empty.
    ;exif.encode_unicode = ISO-8859-15
    ;exif.decode_unicode_motorola = UCS-2BE
    ;exif.decode_unicode_intel = UCS-2LE
    ;exif.encode_jis =
    ;exif.decode_jis_motorola = JIS
    ;exif.decode_jis_intel = JIS
    [Tidy]
    ; The path to a default tidy configuration file to use when using tidy
    ;tidy.default_config = /usr/local/lib/php/default.tcfg
    ; Should tidy clean and repair output automatically?
    ; WARNING: Do not use this option if you are generating non-html content
    ; such as dynamic images
    tidy.clean_output = Off
    [soap]
    ; Enables or disables WSDL caching feature.
    soap.wsdl_cache_enabled=1
    ; Sets the directory name where SOAP extension will put cache files.
    soap.wsdl_cache_dir="/tmp"
    ; (time to live) Sets the number of second while cached file will be used
    ; instead of original one.
    soap.wsdl_cache_ttl=86400
    ; available extensions
    ;extension=bcmath.so
    ;extension=bz2.so
    ;extension=calendar.so
    ;extension=curl.so
    ;extension=dba.so
    ;extension=dbase.so
    ;extension=exif.so
    ;extension=ftp.so
    ;extension=gd.so
    extension=gettext.so
    ;extension=iconv.so
    ;extension=imap.so
    ;extension=json.so
    ;extension=ldap.so
    ;extension=mcrypt.so
    ;extension=mime_magic.so
    ;extension=mysql.so
    ;extension=mysqli.so
    ;extension=ncurses.so
    ;extension=odbc.so
    ;extension=openssl.so
    ;extension=pdo.so
    ;extension=pdo_mysql.so
    ;extension=pdo_odbc.so
    ;extension=pdo_pgsql.so
    ;extension=pdo_sqlite.so
    ;extension=pgsql.so
    ;extension=posix.so
    ;extension=pspell.so
    extension=session.so
    ;extension=shmop.so
    ;extension=snmp.so
    ;extension=soap.so
    ;extension=sockets.so
    ;extension=sqlite.so
    ;extension=sysvmsg.so
    ;extension=sysvsem.so
    ;extension=sysvshm.so
    ;extension=tidy.so
    ;extension=xmlrpc.so
    ;extension=xsl.so
    ;extension=zip.so
    extension=zlib.so
    ; Local Variables:
    ; tab-width: 4
    ; End:
    my /etc/lighttpd/lighttpd.conf
    # lighttpd configuration file
    # use it as a base for lighttpd 1.0.0 and above
    # $Id: lighttpd.conf,v 1.7 2004/11/03 22:26:05 weigon Exp $
    ############ Options you really have to take care of ####################
    ## modules to load
    # at least mod_access and mod_accesslog should be loaded
    # all other module should only be loaded if really neccesary
    # - saves some time
    # - saves memory
    server.modules = (
    # "mod_rewrite",
    # "mod_redirect",
    # "mod_alias",
    "mod_access",
    # "mod_cml",
    # "mod_trigger_b4_dl",
    # "mod_auth",
    # "mod_status",
    # "mod_setenv",
    "mod_fastcgi",
    # "mod_proxy",
    # "mod_simple_vhost",
    # "mod_evhost",
    # "mod_userdir",
    # "mod_cgi",
    "mod_compress",
    # "mod_ssi",
    # "mod_usertrack",
    # "mod_expire",
    # "mod_secdownload",
    # "mod_rrdtool",
    "mod_accesslog" )
    ## a static document-root, for virtual-hosting take look at the
    ## server.virtual-* options
    server.document-root = "/home/lighttpd/html/"
    ## where to send error-messages to
    server.errorlog = "/var/log/lighttpd/error.log"
    # files to check for if .../ is requested
    index-file.names = ( "index.php", "index.html",
    "index.htm", "default.htm" )
    ## set the event-handler (read the performance section in the manual)
    # server.event-handler = "freebsd-kqueue" # needed on OS X
    # mimetype mapping
    mimetype.assign = (
    ".pdf" => "application/pdf",
    ".sig" => "application/pgp-signature",
    ".spl" => "application/futuresplash",
    ".class" => "application/octet-stream",
    ".ps" => "application/postscript",
    ".torrent" => "application/x-bittorrent",
    ".dvi" => "application/x-dvi",
    ".gz" => "application/x-gzip",
    ".pac" => "application/x-ns-proxy-autoconfig",
    ".swf" => "application/x-shockwave-flash",
    ".tar.gz" => "application/x-tgz",
    ".tgz" => "application/x-tgz",
    ".tar" => "application/x-tar",
    ".zip" => "application/zip",
    ".mp3" => "audio/mpeg",
    ".m3u" => "audio/x-mpegurl",
    ".wma" => "audio/x-ms-wma",
    ".wax" => "audio/x-ms-wax",
    ".ogg" => "application/ogg",
    ".wav" => "audio/x-wav",
    ".gif" => "image/gif",
    ".jar" => "application/x-java-archive",
    ".jpg" => "image/jpeg",
    ".jpeg" => "image/jpeg",
    ".png" => "image/png",
    ".xbm" => "image/x-xbitmap",
    ".xpm" => "image/x-xpixmap",
    ".xwd" => "image/x-xwindowdump",
    ".css" => "text/css",
    ".html" => "text/html",
    ".htm" => "text/html",
    ".js" => "text/javascript",
    ".asc" => "text/plain",
    ".c" => "text/plain",
    ".cpp" => "text/plain",
    ".log" => "text/plain",
    ".conf" => "text/plain",
    ".text" => "text/plain",
    ".txt" => "text/plain",
    ".dtd" => "text/xml",
    ".xml" => "text/xml",
    ".mpeg" => "video/mpeg",
    ".mpg" => "video/mpeg",
    ".mov" => "video/quicktime",
    ".qt" => "video/quicktime",
    ".avi" => "video/x-msvideo",
    ".asf" => "video/x-ms-asf",
    ".asx" => "video/x-ms-asf",
    ".wmv" => "video/x-ms-wmv",
    ".bz2" => "application/x-bzip",
    ".tbz" => "application/x-bzip-compressed-tar",
    ".tar.bz2" => "application/x-bzip-compressed-tar",
    # default mime type
    "" => "application/octet-stream",
    # Use the "Content-Type" extended attribute to obtain mime type if possible
    #mimetype.use-xattr = "enable"
    ## send a different Server: header
    ## be nice and keep it at lighttpd
    # server.tag = "lighttpd"
    #### accesslog module
    accesslog.filename = "/var/log/lighttpd/access.log"
    ## deny access the file-extensions
    # ~ is for backupfiles from vi, emacs, joe, ...
    # .inc is often used for code includes which should in general not be part
    # of the document-root
    url.access-deny = ( "~", ".inc" )
    $HTTP["url"] =~ "\.pdf$" {
    server.range-requests = "disable"
    # which extensions should not be handle via static-file transfer
    # .php, .pl, .fcgi are most often handled by mod_fastcgi or mod_cgi
    static-file.exclude-extensions = ( ".php", ".pl", ".fcgi" )
    ######### Options that are good to be but not neccesary to be changed #######
    ## bind to port (default: 80)
    #server.port = 81
    ## bind to localhost (default: all interfaces)
    #server.bind = "127.0.0.1"
    ## error-handler for status 404
    #server.error-handler-404 = "/error-handler.html"
    #server.error-handler-404 = "/error-handler.php"
    ## to help the rc.scripts
    server.pid-file = "/var/run/lighttpd.pid"
    ###### virtual hosts
    ## If you want name-based virtual hosting add the next three settings and load
    ## mod_simple_vhost
    ## document-root =
    ## virtual-server-root + virtual-server-default-host + virtual-server-docroot
    ## or
    ## virtual-server-root + http-host + virtual-server-docroot
    #simple-vhost.server-root = "/home/lighttpd/vhosts/"
    #simple-vhost.default-host = "www.example.org"
    #simple-vhost.document-root = "/htdocs/"
    ## Format: <errorfile-prefix><status-code>.html
    ## -> ..../status-404.html for 'File not found'
    #server.errorfile-prefix = "/usr/share/lighttpd/errors/status-"
    #server.errorfile-prefix = "/srv/www/errors/status-"
    ## virtual directory listings
    #dir-listing.activate = "enable"
    ## enable debugging
    #debug.log-request-header = "enable"
    #debug.log-response-header = "enable"
    #debug.log-request-handling = "enable"
    #debug.log-file-not-found = "enable"
    ### only root can use these options
    # chroot() to directory (default: no chroot() )
    #server.chroot = "/"
    ## change uid to <uid> (default: don't care)
    ## !!!! IF YOU CHANGE THE UID OR GROUPID apply the changes to /etc/logrotate.conf as well !!!
    server.username = "lighttpd"
    ## change uid to <uid> (default: don't care)
    server.groupname = "lighttpd"
    #### compress module
    compress.cache-dir = "/home/lighttpd/cache/"
    compress.filetype = ("text/plain", "text/html")
    #### proxy module
    ## read proxy.txt for more info
    #proxy.server = ( ".php" =>
    # ( "localhost" =>
    # "host" => "192.168.0.101",
    # "port" => 80
    #### fastcgi module
    ## read fastcgi.txt for more info
    ## for PHP don't forget to set cgi.fix_pathinfo = 1 in the php.ini
    fastcgi.server = ( ".php" =>
    ( "localhost" =>
    "socket" => "/var/run/lighttpd/php-fastcgi.socket",
    "bin-path" => "/usr/bin/php-cgi"
    #### CGI module
    #cgi.assign = ( ".pl" => "/usr/bin/perl",
    # ".cgi" => "/usr/bin/perl" )
    #### SSL engine
    #$SERVER["socket"] == "0.0.0.0:443" {
    # ssl.engine = "enable"
    # ssl.pemfile = "/home/lighttpd/ssl/server.pem"
    # server.errorlog = "/var/log/lighttpd/error-ssl.log"
    # accesslog.filename = "/var/log/lighttpd/access-ssl.log"
    # server.document-root = "/home/lighttpd/html-ssl"
    #### status module
    #status.status-url = "/server-status"
    #status.config-url = "/server-config"
    #### auth module
    ## read authentication.txt for more info
    #auth.backend = "plain"
    #auth.backend.plain.userfile = "lighttpd.user"
    #auth.backend.plain.groupfile = "lighttpd.group"
    #auth.backend.ldap.hostname = "localhost"
    #auth.backend.ldap.base-dn = "dc=my-domain,dc=com"
    #auth.backend.ldap.filter = "(uid=$)"
    #auth.require = ( "/server-status" =>
    # "method" => "digest",
    # "realm" => "download archiv",
    # "require" => "user=jan"
    # "/server-config" =>
    # "method" => "digest",
    # "realm" => "download archiv",
    # "require" => "valid-user"
    #### url handling modules (rewrite, redirect, access)
    #url.rewrite = ( "^/$" => "/server-status" )
    #url.redirect = ( "^/wishlist/(.+)" => "http://www.123.org/$1" )
    #### both rewrite/redirect support back reference to regex conditional using %n
    #$HTTP["host"] =~ "^www\.(.*)" {
    # url.redirect = ( "^/(.*)" => "http://%1/$1" )
    # define a pattern for the host url finding
    # %% => % sign
    # %0 => domain name + tld
    # %1 => tld
    # %2 => domain name without tld
    # %3 => subdomain 1 name
    # %4 => subdomain 2 name
    #evhost.path-pattern = "/home/lighttpd/vhosts/%3/htdocs/"
    #### expire module
    #expire.url = ( "/buggy/" => "access 2 hours", "/asdhas/" => "access plus 1 seconds 2 minutes")
    #### ssi
    #ssi.extension = ( ".shtml" )
    #### rrdtool
    #rrdtool.binary = "/usr/bin/rrdtool"
    #rrdtool.db-name = "/var/lib/lighttpd/lighttpd.rrd"
    #### setenv
    #setenv.add-request-header = ( "TRAV_ENV" => "mysql://user@host/db" )
    #setenv.add-response-header = ( "X-Secret-Message" => "42" )
    ## for mod_trigger_b4_dl
    # trigger-before-download.gdbm-filename = "/var/lib/lighttpd/trigger.db"
    # trigger-before-download.memcache-hosts = ( "127.0.0.1:11211" )
    # trigger-before-download.trigger-url = "^/trigger/"
    # trigger-before-download.download-url = "^/download/"
    # trigger-before-download.deny-url = "http://127.0.0.1/index.html"
    # trigger-before-download.trigger-timeout = 10
    ## for mod_cml
    ## don't forget to add index.cml to server.indexfiles
    # cml.extension = ".cml"
    # cml.memcache-hosts = ( "127.0.0.1:11211" )
    #### variable usage:
    ## variable name without "." is auto prefixed by "var." and becomes "var.bar"
    #bar = 1
    #var.mystring = "foo"
    ## integer add
    #bar += 1
    ## string concat, with integer cast as string, result: "www.foo1.com"
    #server.name = "www." + mystring + var.bar + ".com"
    ## array merge
    #index-file.names = (foo + ".php") + index-file.names
    #index-file.names += (foo + ".php")
    #### include
    #include /etc/lighttpd/lighttpd-inc.conf
    ## same as above if you run: "lighttpd -f /etc/lighttpd/lighttpd.conf"
    #include "lighttpd-inc.conf"
    #### include_shell
    #include_shell "echo var.a=1"
    ## the above is same as:
    #var.a=1
    DAEMONS=(syslog-ng iptables network netfs crond sshd lighttpd)
    Did I do anything wrong, is this how it's supposed to work? I googled the error from lighttpd error.log and the only useful information I could find was in polish i think, and unfortunately, i don't speak polish.
    -Zack
    Last edited by Sjoden (2008-05-28 22:00:37)

    ls -l /var/run/lighttpd/
    And how are you spawning the php instances? I don't see that in the daemons array anywhere.
    EDIT: It looks like the info in that page is no longer using pre-spawned instances, but lighttpd adaptive-spawn. The documentation has been made inconsistent it looks like.
    You will note that with pre-spawned information, the config looks different[1].
    You need to do one or the other, not both (eg. choose adaptive-spawn, or pre-spawn..not both).
    [1]: http://wiki.archlinux.org/index.php?tit … oldid=8051 "change"

Maybe you are looking for

  • Time dimension generated differently in 11gR2

    Hi, on generating a new default time dimension, I noticed some strange behaviour compared to the former release which seems to be incorrect. 1. No DIMENSION_KEY column as PK 2. the %_START_DATE columns are defined as business key instead of the %_NUM

  • Want to upgrade...but...

    Hello users. I'm planning to upgrade to the CS3 premium suite (about time...) but wondering if my system spec will be able to perform with the needs of the latest suite requirements... so any advices from you "advised" users will be appreciated. I'm

  • Idea centre B520 slow WiFi connection​.

    I recently bought a leno b520 all in one and I found out that WiFi connectivity is slow on that PC. I tried with Opera, IE, Chrome and Firefox and the problem still exists. I even reinstalled the drivers and nothing has improved. However, my Sony lap

  • Abstract class and class

    What is the difference between abstract class and class in java?

  • OMB6- scrap material with 551 mvt type

    dear experts even though I put the cost center as optional for the movement type 551, in OMB6 and also on the program  RM07CUFA. When I do a MIGo and use 551 movement tyype the system is asking for a cost center as a mandatory entry, even though I pu