0.7.2 CD's fsck.ext3 ???
I thought that fsck.ext3 was in the 0.7.2 CD to make a check on an ext3 fs. Why is it not available?
Gullible Jones wrote:Because it's a symlink to e2fsck?
Not on my Gimmick installation:
[julio@juliocomp ~]$ ll /sbin/fsck.*
-rwxr-xr-x 1 root root 11K 2005-10-28 16:21 /sbin/fsck.cramfs
-rwxr-xr-x 3 root root 672K 2005-12-31 11:28 /sbin/fsck.ext2
-rwxr-xr-x 3 root root 672K 2005-12-31 11:28 /sbin/fsck.ext3
-rwxr-xr-x 1 root root 22K 2005-10-28 16:21 /sbin/fsck.minix
lrwxrwxrwx 1 root root 7 2006-05-02 10:20 /sbin/fsck.msdos -> dosfsck
lrwxrwxrwx 1 root root 10 2006-05-02 09:39 /sbin/fsck.reiserfs -> reiserfsck
-rwxr-xr-x 1 root root 503K 2005-12-31 11:28 /sbin/fsck.static
lrwxrwxrwx 1 root root 7 2006-05-02 10:20 /sbin/fsck.vfat -> dosfsck
Similar Messages
-
Fsck.ext3 a little too fast, what's best way make sure nothing lost?
Short of reinstalling, what are the easiest measures I can take to make sure what I can guarentee is not corrupted is not corrupted? I am going to resync pacman and reinstall everything on my system, but is there anything else I can do? I went through that fsck.ext3 a LITTLE too fast (the system refused to boot until I did it) and now fear something important might have been written. There *are* two files in lostandfound, though I'm not quite sure what to do with them. I guess I'm just a little concerned. All *seems* to be well but...... yeah.
I think I found at least one thing that is corrupt... cd! When you put cd <path that doesn't exist> it spits out weird symbols instead of the usual error message:
megini / $ cd De
bash: cd: De: Τ褦ʥեǥ쥯ȥϤޤ
Is that a part of coreutils?
Last edited by violagirl23 (2008-06-18 07:14:12)fsck doesn't normally do a full check on ext3 unless the filesystem is due a check either according to the time since the last check or the mount count, however you can force a check by using the -f option.
I would only bother reinstalling packages if I had a good reason to think their files were corrupted, e.g. weird errors like the one with the cd command, complaints about missing file or files from a package turning up in lost+found. All packages will reinstalled sooner or later anyway when the packages get updated.
That file from lost+found looks like the pacman depends files for xine-ui, so you could just move it back to /var/lib/pacman/local/xine-ui-<version>/depends where <version> is the version you have installed on your system.
Oh, and "which cd" doesn't return a result for a file, so I think carlocci is right about it being a bash built-in. -
Linux not starting with fsck.ext3: Unable to resovle 'Label=/boot' error
I tried to setup fs by following this
http://blogs.oracle.com/AlejandroVargas/2006/12/how_to_create_configure_and_mo.html
now i restarted & its not staring , i think if i change /etc/fstab and put the setting back i will be able to start it, But new to linux, any body know how to boot it in maintenace mode ? & put the files back i made changes?any body know how to boot it in maintenace mode ?If you could not boot into your system successfully, you need boot into rescue mode from Linux installation CD and then update your /etc/fstab.
Here are steps:
The system should boot from media and land you at the linux boot prompt (boot:). Enter 'linux rescue' and answer the
questions posed ie.:
language - english
keyboard - us
start network - no
mount system under /mnt/sysimage - continue
You may refer to the link:
http://www.redhat.com/docs/manuals/linux/RHL-7.2-Manual/custom-guide/rescuemode.html -
Question about "fast fsck", ext4 and defragmentation status [SOLVED]
I'm trying to use fsck to do a defacto defragmentation check of an ext4 partition. I'm running fsck from a live cd (SysRescue 1.15) to check one of my ext4 partitions. The ext4 partition is unmounted, of course.
The check goes amazingly fast, but it doesn't give me any info about the percentage of non-contiguous inodes, which I understand to be the the same as the percentage of defragmentation (true?). I'm thinking this is because of the new "fast fsck" feature of ext4, as detailed below.
My question: can I force a "slow fsck" in order to get a complete check including the inode-contiguity info? Or is there another way to get at the defragmentation status using fsck?
Thanks.
FWIW, here's the info on "fast fsck" from the excellent http://kernelnewbies.org/Ext4 page:
2.7. Fast fsck
Fsck is a very slow operation, especially the first step: checking all the inodes in the file system. In Ext4, at the end of each group's inode table will be stored a list of unused inodes (with a checksum, for safety), so fsck will not check those inodes. The result is that total fsck time improves from 2 to 20 times, depending on the number of used inodes (http://kerneltrap.org/Linux/Improving_f … ds_in_Ext4). It must be noticed that it's fsck, and not Ext4, who will build the list of unused inodes. This means that you must run fsck to get the list of unused inodes built, and only the next fsck run will be faster (you need to pass a fsck in order to convert a Ext3 filesystem to Ext4 anyway). There's also a feature that takes part in this fsck speed up - "flexible block groups" - that also speeds up filesystem operations.
Last edited by dhave (2009-02-17 22:09:49)Ranguvar wrote:
Woot! http://fly.isti.cnr.it/cgi-bin/dwww/usr … z?type=man
fsck.ext4 -E fragcheck /dev/foo
Thanks, Ranguvar. I had read the man page for fsck.ext3, but I hadn't run across the page for fsck.ext4. The link was helpful. -
Disk error - fsck doesn't want to help
Hi there
yesterday there was a power cut, after that my kde seams to run fine, but suddenly there where a lot of errors in some blocks on /dev/sda8
kde broke and displayed them, afterwards i couldn't log in.
Now i'm trying to fix my hard disk using the desinfect live disk from CT Magazin (anyway the only live disk i had at home).
I can boot into KDE right now, the corrupted partition is the /home parition. but i cannot imagine a way to "clean" it up.
Every time i try to use fsck.ext3 /dev/sda8 i'll get this response:
e2fsck: Attempt to read block from filesystem resulted in short read beim Versuch, /dev/sda8 zu öffnen
Könnte es eine Partion der Länge Null sein?
It asks if the parition length is null. Does anyone here have a hint what i can do?
Greets
[desinfect@localhost ~]$ sudo mke2fs -n /dev/sda8
mke2fs 1.41.9 (22-Aug-2009)
Dateisystem-Label=
OS-Typ: Linux
Blockgröße=4096 (log=2)
Fragmentgröße=4096 (log=2)
23592960 Inodes, 94363794 Blöcke
4718189 Blöcke (5.00%) reserviert für den Superuser
Erster Datenblock=0
Maximale Dateisystem-Blöcke=0
2880 Blockgruppen
32768 Blöcke pro Gruppe, 32768 Fragmente pro Gruppe
8192 Inodes pro Gruppe
Superblock-Sicherungskopien gespeichert in den Blöcken:
32768, 98304, 163840, 229376, 294912, 819200, 884736, 1605632, 2654208,
4096000, 7962624, 11239424, 20480000, 23887872, 71663616, 78675968
[desinfect@localhost ~]$ sudo e2fsck -b 32768 /dev/sda8
e2fsck 1.41.9 (22-Aug-2009)
e2fsck: Attempt to read block from filesystem resulted in short read beim Versuch, /dev/sda8 zu öffnen
Könnte es eine Partion der Länge Null sein?If it has any important data => dd_rescue if=/dev/sda8 of=~/backup/sda8.img and try e2fsck on the img so you can always retry when something goes wrong.
Did dmesg or other logfiles gave some info about the I/O error? (maybe use the -v flag for more verbosity)
Did you try the -b argument with all other backups of the superblock? Maybe you could try to use the -c argument also to disable the bad blocks and the -p argument for preening (it's quiet safe, but working on a backup img is always safer ;-) )
man e2fsck wrote:-c This option causes e2fsck to use badblocks(8)
program to do a read-only scan of the device in
order to find any bad blocks. If any bad
blocks are found, they are added to the bad
block inode to prevent them from being allo‐
cated to a file or directory. If this option
is specified twice, then the bad block scan
will be done using a non-destructive read-write
test.
man e2fsck wrote:-p Automatically repair ("preen") the file system.
This option will cause e2fsck to automatically
fix any filesystem problems that can be safely
fixed without human intervention. If e2fsck
discovers a problem which may require the sys‐
tem administrator to take additional corrective
action, e2fsck will print a description of the
problem and then exit with the value 4 logi‐
cally or'ed into the exit code. (See the EXIT
CODE section.) This option is normally used by
the system's boot scripts. It may not be spec‐
ified at the same time as the -n or -y options. -
Hi
I recently did an online udpate and after a few hours my groupwise stopped working. I checked out the issue and it seems my NSS drive storing my GWDATA is not mounting, I am running a hyper V environment and the scsi drive has enough storage.
Server details
LSB_VERSION="core-2.0-noarch:core-3.2-noarch:core-4.0-noarch:core-2.0-x86_64:core-3.2-x86_64:core-4.0-x86_64"
Novell Open Enterprise Server 11 (x86_64)
VERSION = 11.1
PATCHLEVEL = 1
SUSE Linux Enterprise Server 11 (x86_64)
VERSION = 11
PATCHLEVEL = 2
Linux rem-now-01 3.0.101-0.5-default #1 SMP Thu Oct 31 05:21:34 UTC 2013 (36fae46) x86_64 x86_64 x86_64 GNU/Linux
I have attached the boot message for reference.
These services have failed to load
Master Resource Control: runlevel 5 has been reached
Failed services in runlevel 5: novell-nss novell-xregd grpwise
Skipped services in runlevel 5: nfs smbfs smartd
Any ideas where to start?
klogd 1.4.1, log source = ksyslog started.
<6>[ 0.000000] Initializing cgroup subsys cpuset
<6>[ 0.000000] Initializing cgroup subsys cpu
<5>[ 0.000000] Linux version 3.0.101-0.5-default (geeko@buildhost) (gcc version 4.3.4 [gcc-4_3-branch revision 152973] (SUSE Linux) ) #1 SMP Thu Oct 31 05:21:34 UTC 2013 (36fae46)
<6>[ 0.000000] Command line: root=/dev/disk/by-id/scsi-14d5346542020202030347929c4471f4a992f647d8c930037-part2 resume=/dev/disk/by-id/scsi-14d5346542020202030347929c4471f4a992f647d8c930037-part1 splash=silent crashkernel=256M-:128M vga=0x31a
<6>[ 0.000000] BIOS-provided physical RAM map:
<6>[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
<6>[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
<6>[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
<6>[ 0.000000] BIOS-e820: 0000000000100000 - 00000000f7ff0000 (usable)
<6>[ 0.000000] BIOS-e820: 00000000f7ff0000 - 00000000f7fff000 (ACPI data)
<6>[ 0.000000] BIOS-e820: 00000000f7fff000 - 00000000f8000000 (ACPI NVS)
<6>[ 0.000000] BIOS-e820: 0000000100000000 - 0000000208000000 (usable)
<6>[ 0.000000] NX (Execute Disable) protection: active
<6>[ 0.000000] DMI 2.3 present.
<7>[ 0.000000] DMI: Microsoft Corporation Virtual Machine/Virtual Machine, BIOS 090006 05/23/2012
<6>[ 0.000000] Hypervisor detected: Microsoft HyperV
<6>[ 0.000000] HyperV: features 0xe7f, hints 0x2c
<7>[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
<7>[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
<6>[ 0.000000] No AGP bridge found
<6>[ 0.000000] last_pfn = 0x208000 max_arch_pfn = 0x400000000
<7>[ 0.000000] MTRR default type: uncachable
<7>[ 0.000000] MTRR fixed ranges enabled:
<7>[ 0.000000] 00000-9FFFF write-back
<7>[ 0.000000] A0000-DFFFF uncachable
<7>[ 0.000000] E0000-FFFFF write-back
<7>[ 0.000000] MTRR variable ranges enabled:
<7>[ 0.000000] 0 base 0000000000 mask FF00000000 write-back
<7>[ 0.000000] 1 base 0100000000 mask F000000000 write-back
<7>[ 0.000000] 2 disabled
<7>[ 0.000000] 3 disabled
<7>[ 0.000000] 4 disabled
<7>[ 0.000000] 5 disabled
<7>[ 0.000000] 6 disabled
<7>[ 0.000000] 7 disabled
<6>[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
<6>[ 0.000000] last_pfn = 0xf7ff0 max_arch_pfn = 0x400000000
<6>[ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780
<7>[ 0.000000] initial memory mapped : 0 - 20000000
<7>[ 0.000000] Base memory trampoline at [ffff88000009a000] 9a000 size 20480
<6>[ 0.000000] init_memory_mapping: 0000000000000000-00000000f7ff0000
<7>[ 0.000000] 0000000000 - 00f7e00000 page 2M
<7>[ 0.000000] 00f7e00000 - 00f7ff0000 page 4k
<7>[ 0.000000] kernel direct mapping tables up to 0xf7feffff @ [mem 0x1fffa000-0x1fffffff]
<6>[ 0.000000] init_memory_mapping: 0000000100000000-0000000208000000
<7>[ 0.000000] 0100000000 - 0208000000 page 2M
<7>[ 0.000000] kernel direct mapping tables up to 0x207ffffff @ [mem 0xf7fea000-0xf7feffff]
<6>[ 0.000000] nmi ring buffer: 262144
<6>[ 0.000000] RAMDISK: 37905000 - 37ff0000
<6>[ 0.000000] Reserving 128MB of memory at 752MB for crashkernel (System RAM: 8320MB)
<4>[ 0.000000] ACPI: RSDP 00000000000f56f0 00014 (v00 ACPIAM)
<4>[ 0.000000] ACPI: RSDT 00000000f7ff0000 00040 (v01 VRTUAL MICROSFT 05001223 MSFT 00000097)
<4>[ 0.000000] ACPI: FACP 00000000f7ff0200 00081 (v02 VRTUAL MICROSFT 05001223 MSFT 00000097)
<4>[ 0.000000] ACPI: DSDT 00000000f7ff1724 02E78 (v01 MSFTVM MSFTVM02 00000002 INTL 02002026)
<4>[ 0.000000] ACPI: FACS 00000000f7fff000 00040
<4>[ 0.000000] ACPI: WAET 00000000f7ff1480 00028 (v01 VRTUAL MICROSFT 05001223 MSFT 00000097)
<4>[ 0.000000] ACPI: SLIC 00000000f7ff14c0 00176 (v01 VRTUAL MICROSFT 05001223 MSFT 00000097)
<4>[ 0.000000] ACPI: OEM0 00000000f7ff16c0 00064 (v01 VRTUAL MICROSFT 05001223 MSFT 00000097)
<4>[ 0.000000] ACPI: SRAT 00000000f7ff0600 00100 (v02 VRTUAL MICROSFT 00000001 MSFT 00000001)
<4>[ 0.000000] ACPI: APIC 00000000f7ff0300 0024C (v01 VRTUAL MICROSFT 05001223 MSFT 00000097)
<4>[ 0.000000] ACPI: OEMB 00000000f7fff040 00064 (v01 VRTUAL MICROSFT 05001223 MSFT 00000097)
<7>[ 0.000000] ACPI: Local APIC address 0xfee00000
<6>[ 0.000000] SRAT: PXM 0 -> APIC 0x00 -> Node 0
<6>[ 0.000000] SRAT: PXM 0 -> APIC 0x01 -> Node 0
<6>[ 0.000000] SRAT: PXM 0 -> APIC 0x02 -> Node 0
<6>[ 0.000000] SRAT: PXM 0 -> APIC 0x03 -> Node 0
<6>[ 0.000000] SRAT: PXM 0 -> APIC 0x04 -> Node 0
<6>[ 0.000000] SRAT: PXM 0 -> APIC 0x05 -> Node 0
<6>[ 0.000000] SRAT: PXM 0 -> APIC 0x06 -> Node 0
<6>[ 0.000000] SRAT: PXM 0 -> APIC 0x07 -> Node 0
<6>[ 0.000000] SRAT: Node 0 PXM 0 0-f8000000
<6>[ 0.000000] SRAT: Node 0 PXM 0 100000000-208000000
<6>[ 0.000000] NUMA: Node 0 [0,f8000000) + [100000000,208000000) -> [0,208000000)
<6>[ 0.000000] Initmem setup node 0 0000000000000000-0000000208000000
<6>[ 0.000000] NODE_DATA [0000000207f99000 - 0000000207fbffff]
<7>[ 0.000000] [ffffea0000000000-ffffea00071fffff] PMD -> [ffff8801ff600000-ffff8802067fffff] on node 0
<4>[ 0.000000] Zone PFN ranges:
<4>[ 0.000000] DMA 0x00000010 -> 0x00001000
<4>[ 0.000000] DMA32 0x00001000 -> 0x00100000
<4>[ 0.000000] Normal 0x00100000 -> 0x00208000
<4>[ 0.000000] Movable zone start PFN for each node
<4>[ 0.000000] early_node_map[3] active PFN ranges
<4>[ 0.000000] 0: 0x00000010 -> 0x0000009f
<4>[ 0.000000] 0: 0x00000100 -> 0x000f7ff0
<4>[ 0.000000] 0: 0x00100000 -> 0x00208000
<7>[ 0.000000] On node 0 totalpages: 2097023
<7>[ 0.000000] DMA zone: 56 pages used for memmap
<7>[ 0.000000] DMA zone: 5 pages reserved
<7>[ 0.000000] DMA zone: 3922 pages, LIFO batch:0
<7>[ 0.000000] DMA32 zone: 14280 pages used for memmap
<7>[ 0.000000] DMA32 zone: 997416 pages, LIFO batch:31
<7>[ 0.000000] Normal zone: 14784 pages used for memmap
<7>[ 0.000000] Normal zone: 1066560 pages, LIFO batch:31
<6>[ 0.000000] ACPI: PM-Timer IO Port: 0x408
<7>[ 0.000000] ACPI: Local APIC address 0xfee00000
<6>[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
<6>[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
<6>[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
<6>[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
<6>[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x04] enabled)
<6>[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled)
<6>[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x06] enabled)
<6>[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
<6>[ 0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0x08] disabled)
<6>[ 0.000000] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x09] disabled)
<6>[ 0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x0a] disabled)
<6>[ 0.000000] ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x0b] disabled)
<6>[ 0.000000] ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x0c] disabled)
<6>[ 0.000000] ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x0d] disabled)
<6>[ 0.000000] ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x0e] disabled)
<6>[ 0.000000] ACPI: LAPIC (acpi_id[0x10] lapic_id[0x0f] disabled)
<6>[ 0.000000] ACPI: LAPIC (acpi_id[0x11] lapic_id[0x10] disabled)
<6>[ 0.000000] ACPI: LAPIC (acpi_id[0x12] lapic_id[0x11] disabled)
<6>[ 0.000000] ACPI: LAPIC (acpi_id[0x13] lapic_id[0x12] disabled)
<6>[ 0.000000] ACPI: LAPIC (acpi_id[0x14] lapic_id[0x13] disabled)
<6>[ 0.000000] ACPI: LAPIC (acpi_id[0x15] lapic_id[0x14] disabled)
<6>[ 0.000000] ACPI: LAPIC (acpi_id[0x16] lapic_id[0x15] disabled)
<6>[ 0.000000] ACPI: LAPIC (acpi_id[0x17] lapic_id[0x16] disabled)
<6>[ 0.000000] ACPI: LAPIC (acpi_id[0x18] lapic_id[0x17] disabled)
<6>[ 0.000000] ACPI: LAPIC (acpi_id[0x19] lapic_id[0x18] disabled)
<6>[ 0.000000] ACPI: LAPIC (acpi_id[0x1a] lapic_id[0x19] disabled)
<6>[ 0.000000] ACPI: LAPIC (acpi_id[0x1b] lapic_id[0x1a] disabled)
<6>[ 0.000000] ACPI: LAPIC (acpi_id[0x1c] lapic_id[0x1b] disabled)
<6>[ 0.000000] ACPI: LAPIC (acpi_id[0x1d] lapic_id[0x1c] disabled)
<6>[ 0.000000] ACPI: LAPIC (acpi_id[0x1e] lapic_id[0x1d] disabled)
<6>[ 0.000000] ACPI: LAPIC (acpi_id[0x1f] lapic_id[0x1e] disabled)
<6>[ 0.000000] ACPI: LAPIC (acpi_id[0x20] lapic_id[0x1f] disabled)
<6>[ 0.000000] ACPI: LAPIC (acpi_id[0x21] lapic_id[0x20] disabled)
<6>[ 0.000000] ACPI: LAPIC (acpi_id[0x22] lapic_id[0x21] disabled)
<6>[ 0.000000] ACPI: LAPIC (acpi_id[0x23] lapic_id[0x22] disabled)
<6>[ 0.000000] ACPI: LAPIC (acpi_id[0x24] lapic_id[0x23] disabled)
<6>[ 0.000000] ACPI: LAPIC (acpi_id[0x25] lapic_id[0x24] disabled)
<6>[ 0.000000] ACPI: LAPIC (acpi_id[0x26] lapic_id[0x25] disabled)
<6>[ 0.000000] ACPI: LAPIC (acpi_id[0x27] lapic_id[0x26] disabled)
<6>[ 0.000000] ACPI: LAPIC (acpi_id[0x28] lapic_id[0x27] disabled)
<6>[ 0.000000] ACPI: LAPIC (acpi_id[0x29] lapic_id[0x28] disabled)
<6>[ 0.000000] ACPI: LAPIC (acpi_id[0x2a] lapic_id[0x29] disabled)
<6>[ 0.000000] ACPI: LAPIC (acpi_id[0x2b] lapic_id[0x2a] disabled)
<6>[ 0.000000] ACPI: LAPIC (acpi_id[0x2c] lapic_id[0x2b] disabled)
<6>[ 0.000000] ACPI: LAPIC (acpi_id[0x2d] lapic_id[0x2c] disabled)
<6>[ 0.000000] ACPI: LAPIC (acpi_id[0x2e] lapic_id[0x2d] disabled)
<6>[ 0.000000] ACPI: LAPIC (acpi_id[0x2f] lapic_id[0x2e] disabled)
<6>[ 0.000000] ACPI: LAPIC (acpi_id[0x30] lapic_id[0x2f] disabled)
<6>[ 0.000000] ACPI: LAPIC (acpi_id[0x31] lapic_id[0x30] disabled)
<6>[ 0.000000] ACPI: LAPIC (acpi_id[0x32] lapic_id[0x31] disabled)
<6>[ 0.000000] ACPI: LAPIC (acpi_id[0x33] lapic_id[0x32] disabled)
<6>[ 0.000000] ACPI: LAPIC (acpi_id[0x34] lapic_id[0x33] disabled)
<6>[ 0.000000] ACPI: LAPIC (acpi_id[0x35] lapic_id[0x34] disabled)
<6>[ 0.000000] ACPI: LAPIC (acpi_id[0x36] lapic_id[0x35] disabled)
<6>[ 0.000000] ACPI: LAPIC (acpi_id[0x37] lapic_id[0x36] disabled)
<6>[ 0.000000] ACPI: LAPIC (acpi_id[0x38] lapic_id[0x37] disabled)
<6>[ 0.000000] ACPI: LAPIC (acpi_id[0x39] lapic_id[0x38] disabled)
<6>[ 0.000000] ACPI: LAPIC (acpi_id[0x3a] lapic_id[0x39] disabled)
<6>[ 0.000000] ACPI: LAPIC (acpi_id[0x3b] lapic_id[0x3a] disabled)
<6>[ 0.000000] ACPI: LAPIC (acpi_id[0x3c] lapic_id[0x3b] disabled)
<6>[ 0.000000] ACPI: LAPIC (acpi_id[0x3d] lapic_id[0x3c] disabled)
<6>[ 0.000000] ACPI: LAPIC (acpi_id[0x3e] lapic_id[0x3d] disabled)
<6>[ 0.000000] ACPI: LAPIC (acpi_id[0x3f] lapic_id[0x3e] disabled)
<6>[ 0.000000] ACPI: LAPIC (acpi_id[0x40] lapic_id[0x3f] disabled)
<6>[ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
<6>[ 0.000000] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23
<6>[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
<6>[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
<7>[ 0.000000] ACPI: IRQ0 used by override.
<7>[ 0.000000] ACPI: IRQ2 used by override.
<7>[ 0.000000] ACPI: IRQ9 used by override.
<6>[ 0.000000] Using ACPI (MADT) for SMP configuration information
<6>[ 0.000000] SMP: Allowing 64 CPUs, 56 hotplug CPUs
<7>[ 0.000000] nr_irqs_gsi: 40
<6>[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
<6>[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
<6>[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
<6>[ 0.000000] PM: Registered nosave memory: 00000000f7ff0000 - 00000000f7fff000
<6>[ 0.000000] PM: Registered nosave memory: 00000000f7fff000 - 00000000f8000000
<6>[ 0.000000] PM: Registered nosave memory: 00000000f8000000 - 0000000100000000
<6>[ 0.000000] Allocating PCI resources starting at f8000000 (gap: f8000000:8000000)
<6>[ 0.000000] Booting paravirtualized kernel on bare hardware
<6>[ 0.000000] setup_percpu: NR_CPUS:4096 nr_cpumask_bits:64 nr_cpu_ids:64 nr_node_ids:1
<6>[ 0.000000] PERCPU: Embedded 25 pages/cpu @ffff880206e00000 s73728 r8192 d20480 u131072
<7>[ 0.000000] pcpu-alloc: s73728 r8192 d20480 u131072 alloc=1*2097152
<7>[ 0.000000] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15
<7>[ 0.000000] pcpu-alloc: [0] 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31
<7>[ 0.000000] pcpu-alloc: [0] 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47
<7>[ 0.000000] pcpu-alloc: [0] 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63
<4>[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2067898
<4>[ 0.000000] Policy zone: Normal
<5>[ 0.000000] Kernel command line: root=/dev/disk/by-id/scsi-14d5346542020202030347929c4471f4a992f647d8c930037-part2 resume=/dev/disk/by-id/scsi-14d5346542020202030347929c4471f4a992f647d8c930037-part1 splash=silent crashkernel=256M-:128M vga=0x31a
<6>[ 0.000000] bootsplash: silent mode.
<6>[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
<6>[ 0.000000] Checking aperture...
<6>[ 0.000000] No AGP bridge found
<6>[ 0.000000] Memory: 8043808k/8519680k available (4433k kernel code, 131588k absent, 344284k reserved, 7663k data, 1336k init)
<6>[ 0.000000] Hierarchical RCU implementation.
<6>[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
<6>[ 0.000000] NR_IRQS:262400 nr_irqs:1192 16
<6>[ 0.000000] Console: colour dummy device 80x25
<6>[ 0.000000] console [tty0] enabled
<6>[ 0.000000] allocated 67108864 bytes of page_cgroup
<6>[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
<4>[ 0.000000] Fast TSC calibration failed
<4>[ 0.000000] TSC: Unable to calibrate against PIT
<6>[ 0.000000] TSC: using PMTIMER reference calibration
<4>[ 0.000000] Detected 3324.942 MHz processor.
<6>[ 0.012014] Calibrating delay loop (skipped), value calculated using timer frequency.. 6649.88 BogoMIPS (lpj=13299768)
<6>[ 0.012022] pid_max: default: 65536 minimum: 512
<4>[ 0.012304] kdb version 4.4 by Keith Owens, Scott Lurndal. Copyright SGI, All Rights Reserved
<6>[ 0.012548] Security Framework initialized
<6>[ 0.012570] AppArmor: AppArmor initialized
<6>[ 0.013339] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
<6>[ 0.017041] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
<6>[ 0.018119] Mount-cache hash table entries: 256
<6>[ 0.018332] Initializing cgroup subsys cpuacct
<6>[ 0.018347] Initializing cgroup subsys memory
<6>[ 0.018376] Initializing cgroup subsys devices
<6>[ 0.018381] Initializing cgroup subsys freezer
<6>[ 0.018384] Initializing cgroup subsys net_cls
<6>[ 0.018388] Initializing cgroup subsys blkio
<6>[ 0.018396] Initializing cgroup subsys perf_event
<6>[ 0.021490] CPU: Physical Processor ID: 0
<6>[ 0.021495] CPU: Processor Core ID: 0
<6>[ 0.021500] mce: CPU supports 1 MCE banks
<6>[ 0.121088] ACPI: Core revision 20110413
<6>[ 0.124121] Switched APIC routing to physical flat.
<6>[ 0.204012] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
<6>[ 0.251460] CPU0: Intel(R) Xeon(R) CPU X5680 @ 3.33GHz stepping 02
<6>[ 0.252015] Performance Events: unsupported p6 CPU model 44 no PMU driver, software events only.
<4>[ 0.252015] NMI watchdog disabled (cpu0): hardware events not enabled
<6>[ 0.252015] Booting Node 0, Processors #1
<7>[ 0.252015] smpboot cpu 1: start_ip = 9a000
<4>[ 0.264045] NMI watchdog disabled (cpu1): hardware events not enabled
<4>[ 0.264188] #2
<7>[ 0.264191] smpboot cpu 2: start_ip = 9a000
<4>[ 0.284043] NMI watchdog disabled (cpu2): hardware events not enabled
<4>[ 0.284180] #3
<7>[ 0.284183] smpboot cpu 3: start_ip = 9a000
<4>[ 0.300049] NMI watchdog disabled (cpu3): hardware events not enabled
<4>[ 0.300226] #4
<7>[ 0.300229] smpboot cpu 4: start_ip = 9a000
<4>[ 0.320046] NMI watchdog disabled (cpu4): hardware events not enabled
<4>[ 0.320185] #5
<7>[ 0.320188] smpboot cpu 5: start_ip = 9a000
<4>[ 0.336048] NMI watchdog disabled (cpu5): hardware events not enabled
<4>[ 0.336208] #6
<7>[ 0.336211] smpboot cpu 6: start_ip = 9a000
<4>[ 0.356059] NMI watchdog disabled (cpu6): hardware events not enabled
<4>[ 0.356212] #7
<7>[ 0.356215] smpboot cpu 7: start_ip = 9a000
<4>[ 0.376049] NMI watchdog disabled (cpu7): hardware events not enabled
<6>[ 0.376084] Brought up 8 CPUs
<6>[ 0.376089] Total of 8 processors activated (53199.07 BogoMIPS).
<6>[ 0.396382] devtmpfs: initialized
<6>[ 0.403154] PM: Registering ACPI NVS region at f7fff000 (4096 bytes)
<6>[ 0.403154] print_constraints: dummy:
<6>[ 0.403154] Time: 16:35:52 Date: 12/27/13
<6>[ 0.404195] NET: Registered protocol family 16
<6>[ 0.404383] ACPI: bus type pci registered
<6>[ 0.404749] PCI: Using configuration type 1 for base access
<6>[ 0.405534] bio: create slab <bio-0> at 0
<7>[ 0.410275] ACPI: EC: Look up EC in DSDT
<6>[ 0.413902] ACPI: Interpreter enabled
<6>[ 0.413910] ACPI: (supports S0 S5)
<6>[ 0.413929] ACPI: Using IOAPIC for interrupt routing
<6>[ 0.426448] ACPI: No dock devices found.
<6>[ 0.426456] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
<6>[ 0.427535] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
<6>[ 0.429730] pci_root PNP0A03:00: host bridge window [mem 0xfe0000000-0xfffefffff]
<6>[ 0.429738] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7]
<6>[ 0.429743] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff]
<6>[ 0.429748] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
<6>[ 0.429754] pci_root PNP0A03:00: host bridge window [mem 0xf8000000-0xfffbffff]
<7>[ 0.429922] pci 0000:00:00.0: [8086:7192] type 0 class 0x000600
<7>[ 0.431592] pci 0000:00:07.0: [8086:7110] type 0 class 0x000601
<7>[ 0.434290] pci 0000:00:07.1: [8086:7111] type 0 class 0x000101
<7>[ 0.436389] pci 0000:00:07.1: reg 20: [io 0xffa0-0xffaf]
<7>[ 0.437608] pci 0000:00:07.3: [8086:7113] type 0 class 0x000680
<4>[ 0.437647] * Found PM-Timer Bug on the chipset. Due to workarounds for a bug,
<4>[ 0.437649] * this clock source is slow. Consider trying other clock sources
<6>[ 0.439685] pci 0000:00:07.3: quirk: [io 0x0400-0x043f] claimed by PIIX4 ACPI
<7>[ 0.440542] pci 0000:00:08.0: [1414:5353] type 0 class 0x000300
<7>[ 0.442475] pci 0000:00:08.0: reg 10: [mem 0xf8000000-0xfbffffff]
<7>[ 0.445307] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
<6>[ 0.445568] pci0000:00: Unable to request _OSC control (_OSC support mask: 0x1e)
<6>[ 0.446013] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12 14 15)
<6>[ 0.446236] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
<6>[ 0.446462] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
<6>[ 0.446686] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
<6>[ 0.446918] vgaarb: device added: PCI:0000:00:08.0,decodes=io+mem,owns=io+mem,locks= none
<6>[ 0.446926] vgaarb: loaded
<6>[ 0.447035] PCI: Using ACPI for IRQ routing
<7>[ 0.447035] PCI: pci_cache_line_size set to 64 bytes
<7>[ 0.447035] reserve RAM buffer: 000000000009fc00 - 000000000009ffff
<7>[ 0.447035] reserve RAM buffer: 00000000f7ff0000 - 00000000f7ffffff
<6>[ 0.447035] NetLabel: Initializing
<6>[ 0.447035] NetLabel: domain hash size = 128
<6>[ 0.447035] NetLabel: protocols = UNLABELED CIPSOv4
<6>[ 0.447035] NetLabel: unlabeled traffic allowed by default
<6>[ 0.447035] Switching to clocksource hyperv_clocksource
<6>[ 0.447035] AppArmor: AppArmor Filesystem Enabled
<6>[ 0.447035] pnp: PnP ACPI init
<6>[ 0.447035] ACPI: bus type pnp registered
<7>[ 0.447832] pnp 00:00: [mem 0xfe0000000-0xfffefffff window]
<7>[ 0.447836] pnp 00:00: [bus 00-ff]
<7>[ 0.447838] pnp 00:00: [io 0x0cf8-0x0cff]
<7>[ 0.447841] pnp 00:00: [io 0x0000-0x0cf7 window]
<7>[ 0.447844] pnp 00:00: [io 0x0d00-0xffff window]
<7>[ 0.447847] pnp 00:00: [mem 0x000a0000-0x000bffff window]
<7>[ 0.447849] pnp 00:00: [mem 0x00000000 window]
<7>[ 0.447852] pnp 00:00: [mem 0xf8000000-0xfffbffff window]
<7>[ 0.447893] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
<7>[ 0.447932] pnp 00:01: [dma 4]
<7>[ 0.447934] pnp 00:01: [io 0x0000-0x000f]
<7>[ 0.447937] pnp 00:01: [io 0x0081-0x0083]
<7>[ 0.447939] pnp 00:01: [io 0x0087]
<7>[ 0.447941] pnp 00:01: [io 0x0089-0x008b]
<7>[ 0.447944] pnp 00:01: [io 0x008f]
<7>[ 0.447946] pnp 00:01: [io 0x00c0-0x00df]
<7>[ 0.447974] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
<7>[ 0.447990] pnp 00:02: [io 0x0070-0x0071]
<7>[ 0.452329] pnp 00:02: [irq 8]
<7>[ 0.452369] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
<7>[ 0.452425] pnp 00:03: [io 0x0060]
<7>[ 0.452428] pnp 00:03: [io 0x0064]
<7>[ 0.455932] pnp 00:03: [irq 1]
<7>[ 0.455975] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
<7>[ 0.458641] pnp 00:04: [irq 12]
<7>[ 0.458684] pnp 00:04: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
<7>[ 0.458703] pnp 00:05: [io 0x0061]
<7>[ 0.458735] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
<7>[ 0.458749] pnp 00:06: [io 0x00f0-0x00ff]
<7>[ 0.461312] pnp 00:06: [irq 13]
<7>[ 0.461353] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
<7>[ 0.463988] pnp 00:07: [irq 4]
<7>[ 0.463992] pnp 00:07: [dma 0 disabled]
<7>[ 0.463995] pnp 00:07: [io 0x03f8-0x03ff]
<7>[ 0.464054] pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active)
<7>[ 0.466278] pnp 00:08: [irq 3]
<7>[ 0.466282] pnp 00:08: [dma 0 disabled]
<7>[ 0.466284] pnp 00:08: [io 0x02f8-0x02ff]
<7>[ 0.466344] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active)
<7>[ 0.468615] pnp 00:09: [irq 6]
<7>[ 0.468618] pnp 00:09: [dma 2]
<7>[ 0.468621] pnp 00:09: [io 0x03f0-0x03f5]
<7>[ 0.468623] pnp 00:09: [io 0x03f7]
<7>[ 0.468696] pnp 00:09: Plug and Play ACPI device, IDs PNP0700 (active)
<7>[ 0.468714] pnp 00:0a: [io 0x0010-0x001f]
<7>[ 0.468717] pnp 00:0a: [io 0x0022-0x003f]
<7>[ 0.468719] pnp 00:0a: [io 0x0044-0x005f]
<7>[ 0.468721] pnp 00:0a: [io 0x0062-0x0063]
<7>[ 0.468723] pnp 00:0a: [io 0x0065-0x006f]
<7>[ 0.468725] pnp 00:0a: [io 0x0072-0x007f]
<7>[ 0.468728] pnp 00:0a: [io 0x0080]
<7>[ 0.468732] pnp 00:0a: [io 0x0084-0x0086]
<7>[ 0.468734] pnp 00:0a: [io 0x0088]
<7>[ 0.468736] pnp 00:0a: [io 0x008c-0x008e]
<7>[ 0.468738] pnp 00:0a: [io 0x0090-0x009f]
<7>[ 0.468741] pnp 00:0a: [io 0x00a2-0x00bf]
<7>[ 0.468743] pnp 00:0a: [io 0x00e0-0x00ef]
<7>[ 0.468745] pnp 00:0a: [io 0x01e0-0x01ef]
<7>[ 0.468747] pnp 00:0a: [io 0x0160-0x016f]
<7>[ 0.468749] pnp 00:0a: [io 0x0278-0x027f]
<7>[ 0.468752] pnp 00:0a: [io 0x0378-0x037f]
<7>[ 0.468754] pnp 00:0a: [io 0x0678-0x067f]
<7>[ 0.468756] pnp 00:0a: [io 0x0778-0x077f]
<7>[ 0.468758] pnp 00:0a: [io 0x04d0-0x04d1]
<6>[ 0.468806] system 00:0a: [io 0x01e0-0x01ef] has been reserved
<6>[ 0.468814] system 00:0a: [io 0x0160-0x016f] has been reserved
<6>[ 0.468819] system 00:0a: [io 0x0278-0x027f] has been reserved
<6>[ 0.468824] system 00:0a: [io 0x0378-0x037f] has been reserved
<6>[ 0.468829] system 00:0a: [io 0x0678-0x067f] has been reserved
<6>[ 0.468834] system 00:0a: [io 0x0778-0x077f] has been reserved
<6>[ 0.468839] system 00:0a: [io 0x04d0-0x04d1] has been reserved
<7>[ 0.468844] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
<7>[ 0.469099] pnp 00:0b: [io 0x0400-0x043f]
<7>[ 0.469102] pnp 00:0b: [io 0x0370-0x0371]
<7>[ 0.469105] pnp 00:0b: [io 0x0000-0xffffffffffffffff disabled]
<7>[ 0.469107] pnp 00:0b: [io 0x0440-0x044f]
<7>[ 0.469110] pnp 00:0b: [mem 0xfec00000-0xfec00fff]
<7>[ 0.469112] pnp 00:0b: [mem 0xfee00000-0xfee00fff]
<6>[ 0.469153] system 00:0b: [io 0x0400-0x043f] has been reserved
<6>[ 0.469159] system 00:0b: [io 0x0370-0x0371] has been reserved
<6>[ 0.469164] system 00:0b: [io 0x0440-0x044f] has been reserved
<6>[ 0.469169] system 00:0b: [mem 0xfec00000-0xfec00fff] could not be reserved
<6>[ 0.469175] system 00:0b: [mem 0xfee00000-0xfee00fff] has been reserved
<7>[ 0.469180] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
<7>[ 0.469364] pnp 00:0c: [mem 0x00000000-0x0009ffff]
<7>[ 0.469367] pnp 00:0c: [mem 0x000c0000-0x000dffff]
<7>[ 0.469370] pnp 00:0c: [mem 0x000e0000-0x000fffff]
<7>[ 0.469372] pnp 00:0c: [mem 0x00100000-0xf7ffffff]
<7>[ 0.469374] pnp 00:0c: [mem 0xfffc0000-0xffffffff]
<6>[ 0.469417] system 00:0c: [mem 0x00000000-0x0009ffff] could not be reserved
<6>[ 0.469423] system 00:0c: [mem 0x000c0000-0x000dffff] could not be reserved
<6>[ 0.469429] system 00:0c: [mem 0x000e0000-0x000fffff] could not be reserved
<6>[ 0.469434] system 00:0c: [mem 0x00100000-0xf7ffffff] could not be reserved
<6>[ 0.469439] system 00:0c: [mem 0xfffc0000-0xffffffff] has been reserved
<7>[ 0.469445] system 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active)
<6>[ 0.469782] pnp: PnP ACPI: found 13 devices
<6>[ 0.469787] ACPI: ACPI bus type pnp unregistered
<7>[ 0.476082] PCI: max bus depth: 0 pci_try_num: 1
<7>[ 0.476089] pci_bus 0000:00: resource 4 [mem 0xfe0000000-0xfffefffff]
<7>[ 0.476092] pci_bus 0000:00: resource 5 [io 0x0000-0x0cf7]
<7>[ 0.476094] pci_bus 0000:00: resource 6 [io 0x0d00-0xffff]
<7>[ 0.476097] pci_bus 0000:00: resource 7 [mem 0x000a0000-0x000bffff]
<7>[ 0.476100] pci_bus 0000:00: resource 8 [mem 0xf8000000-0xfffbffff]
<6>[ 0.477048] NET: Registered protocol family 2
<6>[ 0.477558] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
<6>[ 0.479416] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
<6>[ 0.481075] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
<6>[ 0.481261] TCP: Hash tables configured (established 524288 bind 65536)
<6>[ 0.481266] TCP reno registered
<6>[ 0.481283] UDP hash table entries: 4096 (order: 5, 131072 bytes)
<6>[ 0.481335] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
<6>[ 0.482109] NET: Registered protocol family 1
<6>[ 0.482125] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
<7>[ 0.482366] pci 0000:00:08.0: Boot video device
<7>[ 0.482406] PCI: CLS 0 bytes, default 64
<6>[ 0.482455] Unpacking initramfs...
<6>[ 0.659642] Freeing initrd memory: 7084k freed
<6>[ 0.661052] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
<6>[ 0.661059] Placing 64MB software IO TLB between ffff8800f3fea000 - ffff8800f7fea000
<6>[ 0.661064] software IO TLB at phys 0xf3fea000 - 0xf7fea000
<6>[ 0.668188] audit: initializing netlink socket (disabled)
<5>[ 0.668208] type=2000 audit(1388162152.664:1): initialized
<4>[ 0.702880] bounce pool size: 64 pages
<6>[ 0.702891] HugeTLB registered 2 MB page size, pre-allocated 0 pages
<5>[ 0.706769] VFS: Disk quotas dquot_6.5.2
<4>[ 0.706943] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
<6>[ 0.707274] msgmni has been set to 3931
<6>[ 0.707604] alg: No test for stdrng (krng)
<6>[ 0.707718] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
<6>[ 0.707801] io scheduler noop registered
<6>[ 0.707806] io scheduler deadline registered
<6>[ 0.708005] io scheduler cfq registered (default)
<6>[ 0.708249] vesafb: mode is 1280x1024x16, linelength=2560, pages=0
<6>[ 0.708254] vesafb: scrolling: redraw
<6>[ 0.708258] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
<6>[ 0.708929] vesafb: framebuffer at 0xf8000000, mapped to 0xffffc90001800000, using 4096k, total 4096k
<6>[ 0.709049] bootsplash 3.2.0-2010/03/31: looking for picture...
<6>[ 0.709052] bootsplash: silentjpeg size 74123 bytes
<6>[ 0.731946] bootsplash: ...found (1280x1024, 40629 bytes, v3).
<6>[ 0.780927] Console: switching to colour frame buffer device 156x60
<6>[ 0.828743] fb0: VESA VGA frame buffer device
<6>[ 0.828882] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled
<6>[ 0.831332] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
<6>[ 0.846410] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
<6>[ 0.933902] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
<6>[ 0.945594] 00:08: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
<6>[ 0.955274] Non-volatile memory driver v1.3
<6>[ 0.955280] Linux agpgart interface v0.103
<6>[ 0.955379] Fixed MDIO Bus: probed
<6>[ 0.955441] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
<6>[ 0.969808] serio: i8042 KBD port at 0x60,0x64 irq 1
<6>[ 0.969825] serio: i8042 AUX port at 0x60,0x64 irq 12
<6>[ 0.969915] mousedev: PS/2 mouse device common for all mice
<6>[ 0.970155] cpuidle: using governor ladder
<6>[ 0.970161] cpuidle: using governor menu
<6>[ 0.970165] EFI Variables Facility v0.08 2004-May-17
<6>[ 0.970592] TCP cubic registered
<5>[ 0.970609] Registering the dns_resolver key type
<7>[ 0.970721] PM: Checking hibernation image partition /dev/disk/by-id/scsi-14d5346542020202030347929c4471f4a992f647d8c930037-part1
<6>[ 1.008486] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
<4>[ 1.216294] trackpoint.c: failed to get extended button data
<6>[ 1.695523] Refined TSC clocksource calibration: 3324.999 MHz.
<6>[ 4.400574] IBM TrackPoint firmware: 0x01, buttons: 0/0
<6>[ 4.402228] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/input/input1
<7>[ 4.402999] PM: Hibernation image not present or could not be loaded.
<6>[ 4.403017] registered taskstats version 1
<6>[ 4.404389] Magic number: 9:792:591
<6>[ 4.409458] Freeing unused kernel memory: 1336k freed
<6>[ 4.409736] Write protecting the kernel read-only data: 10240k
<6>[ 4.417078] Freeing unused kernel memory: 1692k freed
<6>[ 4.421718] Freeing unused kernel memory: 1000k freed
<5>[ 4.495042] SCSI subsystem initialized
<7>[ 4.497920] libata version 3.00 loaded.
<7>[ 4.504287] ata_piix 0000:00:07.1: version 2.13
<6>[ 4.504462] ata_piix 0000:00:07.1: Hyper-V Virtual Machine detected, ATA device ignore set
<7>[ 4.504682] ata_piix 0000:00:07.1: setting latency timer to 64
<6>[ 4.508495] scsi0 : ata_piix
<6>[ 4.509022] scsi1 : ata_piix
<6>[ 4.510514] ata1: PATA max UDMA/33 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
<6>[ 4.510655] ata2: PATA max UDMA/33 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
<6>[ 4.677885] ata2.00: ATAPI: Virtual CD, , max MWDMA2
<7>[ 4.678807] ata1.00: host indicates ignore ATA devices, ignored
<6>[ 4.678980] ata1.01: ATAPI: Virtual CD, , max MWDMA2
<6>[ 4.681960] ata2.00: configured for MWDMA2
<6>[ 4.683187] ata1.01: configured for MWDMA2
<5>[ 4.687680] scsi 0:0:1:0: CD-ROM Msft Virtual CD/ROM 1.0 PQ: 0 ANSI: 5
<5>[ 4.689758] scsi 1:0:0:0: CD-ROM Msft Virtual CD/ROM 1.0 PQ: 0 ANSI: 5
<6>[ 4.708425] hv_vmbus: Hyper-V Host OS Build:9200-6.2-16-0.16729
<6>[ 4.712400] hv_vmbus: Negotiated host information 13
<6>[ 4.712845] hv_vmbus: child device vmbus_0_1 registered
<6>[ 4.713110] hv_vmbus: child device vmbus_0_2 registered
<6>[ 4.713394] hv_vmbus: child device vmbus_0_3 registered
<6>[ 4.713669] hv_vmbus: child device vmbus_0_4 registered
<6>[ 4.713974] hv_vmbus: child device vmbus_0_5 registered
<6>[ 4.714247] hv_vmbus: child device vmbus_0_6 registered
<6>[ 4.714521] hv_vmbus: child device vmbus_0_7 registered
<6>[ 4.714799] hv_vmbus: child device vmbus_0_8 registered
<6>[ 4.715094] hv_vmbus: child device vmbus_0_9 registered
<6>[ 4.715367] hv_vmbus: child device vmbus_0_10 registered
<6>[ 4.715643] hv_vmbus: child device vmbus_0_11 registered
<6>[ 4.715912] hv_vmbus: child device vmbus_0_12 registered
<6>[ 9.693609] hv_vmbus: registering driver hv_storvsc
<6>[ 9.694468] scsi2 : storvsc_host_t
<5>[ 9.695151] scsi 2:0:0:0: Direct-Access Msft Virtual Disk 1.0 PQ: 0 ANSI: 4
<6>[ 9.695843] scsi3 : storvsc_host_t
<6>[ 9.696625] scsi scan: INQUIRY result too short (5), using 36
<5>[ 9.697436] scsi 3:0:0:1: Direct-Access Msft Virtual Disk 1.0 PQ: 0 ANSI: 4
<6>[ 9.698016] scsi scan: INQUIRY result too short (5), using 36
<6>[ 14.687376] hp_sw: device handler registered
<6>[ 14.695768] rdac: device handler registered
<6>[ 14.703207] alua: device handler registered
<6>[ 14.711258] emc: device handler registered
<6>[ 14.716329] udev: starting version 147
<7>[ 14.744338] ACPI: acpi_idle registered with cpuidle
<6>[ 14.749183] hv_vmbus: registering driver hv_netvsc
<6>[ 14.750531] hv_netvsc: hv_netvsc channel opened successfully
<5>[ 14.754431] sd 2:0:0:0: [sda] 83886080 512-byte logical blocks: (42.9 GB/40.0 GiB)
<5>[ 14.754627] sd 3:0:0:1: [sdb] 1048576000 512-byte logical blocks: (536 GB/500 GiB)
<5>[ 14.754770] sd 2:0:0:0: [sda] Write Protect is off
<7>[ 14.754920] sd 2:0:0:0: [sda] Mode Sense: 0f 00 00 00
<5>[ 14.754929] sd 3:0:0:1: [sdb] Write Protect is off
<7>[ 14.755076] sd 3:0:0:1: [sdb] Mode Sense: 0f 00 00 00
<5>[ 14.755136] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
<5>[ 14.755365] sd 3:0:0:1: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
<6>[ 14.756100] sdb: sdb1
<5>[ 14.756539] sd 3:0:0:1: [sdb] Attached SCSI disk
<6>[ 14.760677] sda: sda1 sda2
<5>[ 14.761170] sd 2:0:0:0: [sda] Attached SCSI disk
<6>[ 14.853739] hv_netvsc vmbus_0_11: Device MAC 00:15:5d:06:83:03 link state up
<7>[ 19.909479] PM: Marking nosave pages: 000000000009f000 - 0000000000100000
<7>[ 19.909485] PM: Marking nosave pages: 00000000f7ff0000 - 0000000100000000
<7>[ 19.909724] PM: Basic memory bitmaps created
<7>[ 19.948242] PM: Basic memory bitmaps freed
<6>[ 19.959506] PM: Starting manual resume from disk
<7>[ 19.959648] PM: Hibernation image partition 8:1 present
<7>[ 19.959650] PM: Looking for hibernation image.
<7>[ 19.961619] PM: Image not found (code -22)
<7>[ 19.961622] PM: Hibernation image not present or could not be loaded.
<6>[ 20.136385] kjournald starting. Commit interval 15 seconds
<6>[ 20.136764] EXT3-fs (sda2): using internal journal
<6>[ 20.136899] EXT3-fs (sda2): mounted filesystem with ordered data mode
<6>[ 21.569339] udev: starting version 147
<4>[ 21.628664] sr0: scsi3-mmc drive: 0x/0x tray
<6>[ 21.628807] cdrom: Uniform CD-ROM driver Revision: 3.20
<7>[ 21.629053] sr 0:0:1:0: Attached scsi CD-ROM sr0
<4>[ 21.632902] sr1: scsi3-mmc drive: 0x/0x tray
<7>[ 21.633138] sr 1:0:0:0: Attached scsi CD-ROM sr1
<5>[ 21.670559] sr 0:0:1:0: Attached scsi generic sg0 type 5
<5>[ 21.670736] sr 1:0:0:0: Attached scsi generic sg1 type 5
<5>[ 21.670913] sd 2:0:0:0: Attached scsi generic sg2 type 0
<5>[ 21.671088] sd 3:0:0:1: Attached scsi generic sg3 type 0
<6>[ 21.694963] input: PC Speaker as /devices/platform/pcspkr/input/input2
<6>[ 21.738202] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
<6>[ 21.738681] ACPI: Power Button [PWRF]
<6>[ 21.739750] hv_utils: Registering HyperV Utility Driver
<6>[ 21.739888] hv_vmbus: registering driver hv_util
<6>[ 21.741454] hv_vmbus: child device vmbus_0_5 unregistered
<3>[ 21.855470] piix4_smbus 0000:00:07.3: SMBus base address uninitialized - upgrade BIOS or use force_addr=0xaddr
<6>[ 21.863250] Floppy drive(s): fd0 is 1.44M
<6>[ 21.890107] FDC 0 is an 82078.
<6>[ 21.937189] rtc_cmos 00:02: RTC can wake from S4
<6>[ 21.958729] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
<6>[ 21.964296] rtc0: alarms up to one month, 114 bytes nvram
<6>[ 22.068854] hv_vmbus: registering driver hid_hyperv
<6>[ 22.070603] input: Microsoft Vmbus HID-compliant Mouse as /devices/virtual/input/input4
<6>[ 22.070814] hid 0006:045E:0621.0001: input: <UNKNOWN> HID v0.01 Mouse [Microsoft Vmbus HID-compliant Mouse] on
<6>[ 27.106125] Adding 2103292k swap on /dev/sda1. Priority:-1 extents:1 across:2103292k
<6>[ 28.737563] device-mapper: uevent: version 1.0.3
<6>[ 28.738201] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: [email protected]
<6>[ 29.026019] loop: module loaded
<6>[ 30.169641] fuse init (API version 7.16)
Kernel logging (ksyslog) stopped.
Kernel log daemon terminating.
Boot logging started on /dev/tty1(/dev/console) at Sat Dec 28 03:36:11 2013
Trying manual resume from /dev/disk/by-id/scsi-14d5346542020202030347929c4471f4a992f647d8c930037-part1
Invoking userspace resume from /dev/disk/by-id/scsi-14d5346542020202030347929c4471f4a992f647d8c930037-part1
resume: libgcrypt version: 1.5.0
Trying manual resume from /dev/disk/by-id/scsi-14d5346542020202030347929c4471f4a992f647d8c930037-part1
Invoking in-kernel resume from /dev/disk/by-id/scsi-14d5346542020202030347929c4471f4a992f647d8c930037-part1
Waiting for device /dev/disk/by-id/scsi-14d5346542020202030347929c4471f4a992f647d8c930037-part2 to appear: ok
fsck from util-linux 2.19.1
[/sbin/fsck.ext3 (1) -- /] fsck.ext3 -a -C0 /dev/sda2
/dev/sda2: clean, 296531/2490368 files, 1999842/9959680 blocks
fsck succeeded. Mounting root device read-write.
Mounting root /dev/disk/by-id/scsi-14d5346542020202030347929c4471f4a992f647d8c930037-part2
mount -o rw,acl,user_xattr -t ext3 /dev/disk/by-id/scsi-14d5346542020202030347929c4471f4a992f647d8c930037-part2 /root
Boot logging started on /dev/tty1(/dev/console) at Sat Dec 28 03:36:13 2013
<notice -- Dec 28 03:36:13.332905000>
boot.debugfs start
Mounting debugfs at /sys/kernel/debugdone
<notice -- Dec 28 03:36:13.369284000>
'boot.debugfs start' exits with status 0
<notice -- Dec 28 03:36:13.371108000>
boot.udev start
Starting udevd: done
Loading drivers, configuring devices: done
<notice -- Dec 27 20:10:55.354414000>
'boot.udev start' exits with status 0
<notice -- Dec 27 20:10:55.355966000>
boot.rootfsck start
Activating swap-devices in /etc/fstab...
done
<notice -- Dec 27 20:10:55.398783000>
'boot.rootfsck start' exits with status 0
<notice -- Dec 27 20:10:55.400577000>
boot.clock start
Set System Time to the current Hardware Clockdone
<notice -- Dec 27 20:10:56.942379000>
'boot.clock start' exits with status 0
<notice -- Dec 27 20:10:56.944352000>
boot.device-mapper start
Activating device mapper...
done
<notice -- Dec 27 20:10:57.20179000>
'boot.device-mapper start' exits with status 0
<notice -- Dec 27 20:10:57.22434000>
boot.loadmodules start
Loading required kernel modules
done
<notice -- Dec 27 20:10:57.46596000>
'boot.loadmodules start' exits with status 0
<notice -- Dec 27 20:10:57.48288000>
boot.md start
Starting MD RAID unused
<notice -- Dec 27 20:10:57.112371000>
'boot.md start' exits with status 6
<notice -- Dec 27 20:10:57.114441000>
boot.localfs start
Checking file systems...
fsck from util-linux 2.19.1
doneMounting local file systems...
proc on /proc type proc (rw)
sysfs on /sys type sysfs (rw)
debugfs on /sys/kernel/debug type debugfs (rw)
udev on /dev type tmpfs (rw,mode=0755)
tmpfs on /dev/shm type tmpfs (rw,mode=1777)
devpts on /dev/pts type devpts (rw,mode=0620,gid=5)
nothing was mounted
done
<notice -- Dec 27 20:10:57.331387000>
'boot.localfs start' exits with status 0
<notice -- Dec 27 20:10:57.332580000>
boot.compliance start
Check if the profiles matches the systemdone
<notice -- Dec 27 20:10:58.355993000>
'boot.compliance start' exits with status 0
<notice -- Dec 27 20:10:58.357530000>
boot.cycle start
<notice -- Dec 27 20:10:58.399207000>
'boot.cycle start' exits with status 6
<notice -- Dec 27 20:10:58.401339000>
boot.fuse start
Loading fuse module done
Mounting fuse control filesystemdone
<notice -- Dec 27 20:10:58.458495000>
'boot.fuse start' exits with status 0
<notice -- Dec 27 20:10:58.460101000>
boot.klog start
Creating /var/log/boot.msg
done
<notice -- Dec 27 20:10:58.549404000>
pidofproc: /sbin/blogd
407
<notice -- Dec 27 20:10:58.571980000>
killproc: kill(407,29)
<notice -- Dec 27 20:10:58.579244000> 'boot.klog start' exits with status 0
<notice -- Dec 27 20:10:58.581541000> boot.lvm_monitor start
Enabling monitoring on LVM volume groups...
No volume groups found
done
<notice -- Dec 27 20:10:58.735165000> 'boot.lvm_monitor start' exits with status 0
<notice -- Dec 27 20:10:58.736906000> boot.proc start
<notice -- Dec 27 20:10:58.773908000> 'boot.proc start' exits with status 0
<notice -- Dec 27 20:10:58.775634000> boot.scpm start
<notice -- Dec 27 20:10:58.817985000> 'boot.scpm start' exits with status 0
<notice -- Dec 27 20:10:58.819520000> boot.swap start
Activating remaining swap-devices in /etc/fstab...
done
<notice -- Dec 27 20:10:58.890568000>
'boot.swap start' exits with status 0
<notice -- Dec 27 20:10:58.892520000> boot.udev_retry start
<notice -- Dec 27 20:10:58.931843000>
'boot.udev_retry start' exits with status 0
<notice -- Dec 27 20:10:58.933759000> boot.ldconfig start
<notice -- Dec 27 20:10:59.80965000> 'boot.ldconfig start' exits with status 0
<notice -- Dec 27 20:10:59.83077000> boot.quota start
Turning quota on
Checking quotas. This may take some time.
done
<notice -- Dec 27 20:10:59.144356000> 'boot.quota start' exits with status 0
<notice -- Dec 27 20:10:59.146277000> boot.sysctl start
Setting current sysctl status from /etc/sysctl.confdone
<notice -- Dec 27 20:10:59.201868000> 'boot.sysctl start' exits with status 0
<notice -- Dec 27 20:10:59.203812000> boot.cleanup start
<notice -- Dec 27 20:11:00.59571000> pidofproc: /sbin/blogd 407
<notice -- Dec 27 20:11:00.344682000>
'boot.cleanup start' exits with status 0
<notice -- Dec 27 20:11:00.346899000> boot.ipconfig start
Enabling syn flood protectiondone
Disabling IP forwardingdone
done
<notice -- Dec 27 20:11:00.396956000> 'boot.ipconfig start' exits with status 0
<notice -- Dec 27 20:11:00.398786000> boot.apparmor start
Starting AppArmor Mounting securityfs on /sys/kernel/security done
done
<notice -- Dec 27 20:11:01.800318000> 'boot.apparmor start' exits with status 0
<notice -- Dec 27 20:11:01.802316000> boot.localnet start
Setting up hostname 'rem-now-01'done
Setting up loopback interface lo
lo IP address: 127.0.0.1/8
IP address: 127.0.0.2/8
done
<notice -- Dec 27 20:11:02.188822000>
'boot.localnet start' exits with status 0
<notice -- Dec 27 20:11:02.190205000> boot.kdump start
Loading kdump
done
<notice -- Dec 27 20:11:02.907821000> 'boot.kdump start' exits with status 0
System Boot Control: The system has been set up
Skipped features: boot.md boot.cycle
System Boot Control: Running /etc/init.d/boot.local
done
INIT: Entering runlevel: 5
Master Resource Control: previous runlevel: N, switching to runlevel: 5
<notice -- Dec 27 20:11:03.110539000> acpid start
Starting acpid
<notice -- Dec 27 20:11:03.153151000> startproc: execve (/sbin/acpid) [ /sbin/acpid ], [ CONSOLE=/dev/console SELINUX_INIT=YES ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 crashkernel=256M-:128M LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a DO_CONFIRM= RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SLES/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/scsi-14d5346542020202030347929c4471f4a992f647d8c930037-part2 _=/sbin/startproc DAEMON=/sbin/acpid ]
acpid: starting up
done
<notice -- Dec 27 20:11:03.166295000> 'acpid start' exits with status 0
<notice -- Dec 27 20:11:03.168126000>
dbus start
acpid: 2 rules loaded
Starting D-Bus daemondone
<notice -- Dec 27 20:11:03.428391000> 'dbus start' exits with status 0
<notice -- Dec 27 20:11:03.430244000> earlysyslog start
Starting syslog services
<notice -- Dec 27 20:11:03.492560000>
startproc: execve (/sbin/syslog-ng) [
/sbin/syslog-ng
SELINUX_INIT=YES
CONSOLE=/dev/console
ROOTFS_FSTYPE=ext3
TERM=linux
SHELL=/bin/sh
ROOTFS_FSCK=0
crashkernel=256M-:128M
LC_ALL=POSIX
INIT_VERSION=sysvinit-2.86
REDIRECT=/dev/tty1
COLUMNS=156
PATH=/bin:/sbin:/usr/bin:/usr/sbin
DO_CONFIRM=
vga=0x31a
RUNLEVEL=5
SPLASHCFG=/etc/bootsplash/themes/SLES/config/bootsplash-1280x1024.cfg
PWD=/
PREVLEVEL=N
LINES=60
SHLVL=2
HOME=/
SPLASH=yes
splash=silent
ROOTFS_BLKDEV=/dev/disk/by-id/scsi-14d5346542020202030347929c4471f4a992f647d8c930037-part2
_=/sbin/startproc
DAEMON=/sbin/syslog-ng
<notice -- Dec 27 20:11:03.559776000> startproc: execve (/sbin/klogd) [ /sbin/klogd -c 1 -x ], [ SELINUX_INIT=YES CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 crashkernel=256M-:128M LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin DO_CONFIRM= vga=0x31a RUNLEVEL=5 SPLASHCFG=/etc/bootsplash/themes/SLES/config/bootsplash-1280x1024.cfg PWD=/ PREVLEVEL=N LINES=60 SHLVL=2 HOME=/ SPLASH=yes splash=silent ROOTFS_BLKDEV=/dev/disk/by-id/scsi-14d5346542020202030347929c4471f4a992f647d8c930037-part2
_=/sbin/startproc DAEMON=/sbin/klogd ]
done
<notice -- Dec 27 20:11:03.570513000> 'earlysyslog start' exits with status 0
<notice -- Dec 27 20:11:03.572386000>
fbset start
<notice -- Dec 27 20:11:03.604926000> 'fbset start' exits with status 0
<notice -- Dec 27 20:11:03.606796000> micasad start
Starting miCASA daemondone
<notice -- Dec 27 20:11:05.737324000> 'micasad start' exits with status 0
<notice -- Dec 27 20:11:05.739136000> microcode.ctl start
Checking CPU.. upload Intel microcodedone
<notice -- Dec 27 20:11:05.995091000>
'microcode.ctl start' exits with status 0
<notice -- Dec 27 20:11:05.996419000> purge-kernels start
<notice -- Dec 27 20:11:06.24241000> 'purge-kernels start' exits with status 0
<notice -- Dec 27 20:11:06.25539000> random start
Initializing random number generatordone
<notice -- Dec 27 20:11:06.81102000> 'random start' exits with status 0
<notice -- Dec 27 20:11:06.82673000> haldaemon start
Loading CPUFreq modules (CPUFreq not supported)
Starting HAL daemondone
<notice -- Dec 27 20:11:07.19742000> 'haldaemon start' exits with status 0
<notice -- Dec 27 20:11:07.21771000> network start
<notice -- Dec 27 20:11:07.219643000> checkproc: /sbin/udevd 442<notice -- Dec 27 20:11:07.219718000> checkproc: /sbin/udevd 532<notice -- Dec 27 20:11:07.219728000> checkproc: /sbin/udevd 533<notice -- Dec 27 20:11:07.219735000> checkproc: /sbin/udevd 1409<notice -- Dec 27 20:11:07.219742000> checkproc: /sbin/udevd 1415<notice -- Dec 27 20:11:07.219749000> checkproc: /sbin/udevd 1416<notice -- Dec 27 20:11:07.219755000> checkproc: /sbin/udevd 1426<notice -- Dec 27 20:11:07.219762000> checkproc: /sbin/udevd 1427<notice -- Dec 27 20:11:07.219768000> checkproc: /sbin/udevd
1439<notice -- Dec 27 20:11:07.219774000> checkproc: /sbin/udevd 1440<notice -- Dec 27 20:11:07.219781000> checkproc: /sbin/udevd 1450<notice -- Dec 27 20:11:07.219787000> checkproc: /sbin/udevd 1453<notice -- Dec 27 20:11:07.219793000> checkproc: /sbin/udevd
1465<notice -- Dec 27 20:11:07.219800000> checkproc: /sbin/udevd
1466<notice -- Dec 27 20:11:07.219806000> checkproc: /sbin/udevd 1479<notice -- Dec 27 20:11:07.219812000> checkproc: /sbin/udevd 1480<notice -- Dec 27 20:11:07.219819000> checkproc: /sbin/udevd 1492<notice -- Dec 27 20:11:07.219825000> checkproc: /sbin/udevd 1493<notice -- Dec 27 20:11:07.219831000> checkproc: /sbin/udevd 1504
Setting up (localfs) network interfaces:
lo
lo IP address: 127.0.0.1/8
IP address: 127.0.0.2/8
done eth0 name: Virtual Ethernet Card 0
eth0 IP address: 192.168.0.10/24
doneSetting up service (localfs) network . . . . . . . . . .done
<notice -- Dec 27 20:11:08.220701000> 'network start' exits with status 0
<notice -- Dec 27 20:11:08.222521000>
novell-httpstkd start
Starting the Novell Small Http Interface Daemon.
<notice -- Dec 27 20:11:08.455149000> 'novell-httpstkd start' exits with status 0
<notice -- Dec 27 20:11:08.457662000>
syslog start
<notice -- Dec 27 20:11:08.477565000> 'syslog start' exits with status 0
<notice -- Dec 27 20:11:08.479072000> auditd start
Starting auditd
<notice -- Dec 27 20:11:08.525517000> startproc: execve (/sbin/auditd) [ /sbin/auditd -s disable ], [ CONSOLE=/dev/console SELINUX_INIT=YES ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 crashkernel=256M-:128M LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a DO_CONFIRM= RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SLES/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/scsi-14d5346542020202030347929c4471f4a992f647d8c930037-part2 _=/sbin/startproc DAEMON=/sbin/auditd ]
done
<notice -- Dec 27 20:11:08.721488000> 'auditd start' exits with status 0
<notice -- Dec 27 20:11:08.723477000>
haveged start
Starting haveged daemon
<notice -- Dec 27 20:11:08.772775000>
startproc: execve (/sbin/haveged) [
/sbin/haveged
-w
1024
-v
1
CONSOLE=/dev/console
SELINUX_INIT=YES
ROOTFS_FSTYPE=ext3
SHELL=/bin/sh
TERM=linux
ROOTFS_FSCK=0
crashkernel=256M-:128M
LC_ALL=POSIX
INIT_VERSION=sysvinit-2.86
REDIRECT=/dev/tty1
COLUMNS=156
PATH=/bin:/sbin:/usr/bin:/usr/sbin
vga=0x31a
DO_CONFIRM=
RUNLEVEL=5
PWD=/
SPLASHCFG=/etc/bootsplash/themes/SLES/config/bootsplash-1280x1024.cfg
PREVLEVEL=N
LINES=60
HOME=/
SHLVL=2
splash=silent
SPLASH=yes
ROOTFS_BLKDEV=/dev/disk/by-id/scsi-14d5346542020202030347929c4471f4a992f647d8c930037-part2
_=/sbin/startproc
DAEMON=/sbin/haveged
done
<notice -- Dec 27 20:11:08.977862000> 'haveged start' exits with status 0
<notice -- Dec 27 20:11:08.979577000> rpcbind start
Starting rpcbind
<notice -- Dec 27 20:11:09.33208000> startproc: execve (/sbin/rpcbind) [ /sbin/rpcbind ], [ CONSOLE=/dev/console SELINUX_INIT=YES ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 crashkernel=256M-:128M LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a DO_CONFIRM= RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SLES/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/scsi-14d5346542020202030347929c4471f4a992f647d8c930037-part2 _=/sbin/startproc DAEMON=/sbin/rpcbind ]
done
<notice -- Dec 27 20:11:09.106169000> 'rpcbind start' exits with status 0
<notice -- Dec 27 20:11:09.107657000>
splash_early start
<notice -- Dec 27 20:11:09.150175000>
'splash_early start' exits with status 0
<notice -- Dec 27 20:11:09.152071000> nfs start
Not starting NFS client services - no NFS found in /etc/fstab:unused
<notice -- Dec 27 20:11:09.212532000> 'nfs start' exits with status 6
<notice -- Dec 27 20:11:09.214284000> smbfs start
Mount CIFS File Systems unused
<notice -- Dec 27 20:11:09.270080000> 'smbfs start' exits with status 6
<notice -- Dec 27 20:11:09.272092000> kbd start
Loading console font lat9w-16.psfu -m trivial G0:loadable
doneLoading keymap assuming iso-8859-15 euro
Loading /usr/share/kbd/keymaps/i386/qwerty/us.map.gz
doneLoading compose table latin1.adddone
Start Unicode mode
done
<notice -- Dec 27 20:11:10.78851000> 'kbd start' exits with status 0
<notice -- Dec 27 20:11:10.81452000> alsasound start
<notice -- Dec 27 20:11:10.119462000> 'alsasound start' exits with status 0
<notice -- Dec 27 20:11:10.120953000> bluez-coldplug start
done
<notice -- Dec 27 20:11:10.159870000> 'bluez-coldplug start' exits with status 0
<notice -- Dec 27 20:11:10.161649000> irq_balancer start
Starting irqbalance
<notice -- Dec 27 20:11:10.228044000> startproc: execve (/usr/sbin/irqbalance) [ /usr/sbin/irqbalance ], [ CONSOLE=/dev/console SELINUX_INIT=YES ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 crashkernel=256M-:128M LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a DO_CONFIRM= RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SLES/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/scsi-14d5346542020202030347929c4471f4a992f647d8c930037-part2 _=/sbin/startproc DAEMON=/usr/sbin/irqbalance ]
done
<notice -- Dec 27 20:11:10.240220000> 'irq_balancer start' exits with status 0
<notice -- Dec 27 20:11:10.241681000> java.binfmt_misc start
Starting java.binfmt_misc done
<notice -- Dec 27 20:11:10.312192000>
'java.binfmt_misc start' exits with status 0
<notice -- Dec 27 20:11:10.314207000> mcelog start
Starting mcelog...
<notice -- Dec 27 20:11:10.378680000> startproc: execve (/usr/sbin/mcelog) [ /usr/sbin/mcelog --daemon --config-file /etc/mcelog/mcelog.conf ], [ CONSOLE=/dev/console SELINUX_INIT=YES ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 crashkernel=256M-:128M LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a DO_CONFIRM= RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SLES/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/scsi-14d5346542020202030347929c4471f4a992f647d8c930037-part2 _=/sbin/startproc DAEMON=/usr/sbin/mcelog ]
done
<notice -- Dec 27 20:11:10.428551000> 'mcelog start' exits with status 0
<notice -- Dec 27 20:11:10.429934000> network-remotefs start
<notice -- Dec 27 20:11:10.635758000> checkproc: /sbin/udevd 442<notice -- Dec 27 20:11:10.635835000> checkproc: /sbin/udevd 532<notice -- Dec 27 20:11:10.635845000> checkproc: /sbin/udevd 533<notice -- Dec 27 20:11:10.635852000> checkproc: /sbin/udevd 2355<notice -- Dec 27 20:11:10.635859000> checkproc: /sbin/udevd 2356<notice -- Dec 27 20:11:10.635865000> checkproc: /sbin/udevd 2357<notice -- Dec 27 20:11:10.635872000> checkproc: /sbin/udevd 2359
Setting up (remotefs) network interfaces:
Setting up service (remotefs) network . . . . . . . . . .done
<notice -- Dec 27 20:11:10.863775000> 'network-remotefs start' exits with status 0
<notice -- Dec 27 20:11:10.865981000> sfcb start
Starting sfcb:
<notice -- Dec 27 20:11:10.936575000> startproc: execve (/usr/sbin/sfcbd) [ /usr/sbin/sfcbd -d ], [ CONSOLE=/dev/console SELINUX_INIT=YES ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LD_PRELOAD=/lib64/libpam_misc.so.0 crashkernel=256M-:128M LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a DO_CONFIRM= RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SLES/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/scsi-14d5346542020202030347929c4471f4a992f647d8c930037-part2 _=/sbin/startproc DAEMON=/usr/sbin/sfcbd ]
done
<notice -- Dec 27 20:11:11.23169000> 'sfcb start' exits with status 0
<notice -- Dec 27 20:11:11.24855000> slpd start
Starting slpd
<I bet LUM is not working properly. Go to OES setup and run through the LUM settings.
I had the same problem after a partially failed migration from OES2 to OES11. Also make sure your OESCommonProxy_servername users are correct. This got all messed up for me.
>>> rbsa<[email protected]> 12/27/2013 5:06 AM >>>
Hi
I recently did an online udpate and after a few hours my groupwise
stopped working. I checked out the issue and it seems my NSS drive
storing my GWDATA is not mounting, I am running a hyper V environment
and the scsi drive has enough storage.
Server details
LSB_VERSION="core-2.0-noarch:core-3.2-noarch:core-4.0-noarch:core-2.0-x86_64:core-3.2-x86_64:core-4.0-x86_64"
Novell Open Enterprise Server 11 (x86_64)
VERSION = 11.1
PATCHLEVEL = 1
SUSE Linux Enterprise Server 11 (x86_64)
VERSION = 11
PATCHLEVEL = 2
Linux rem-now-01 3.0.101-0.5-default #1 SMP Thu Oct 31 05:21:34 UTC 2013
(36fae46) x86_64 x86_64 x86_64 GNU/Linux
I have attached the boot message for reference.
These services have failed to load
Master Resource Control: runlevel 5 has been reached
Failed services in runlevel 5: novell-nss novell-xregd grpwise
Skipped services in runlevel 5: nfs smbfs smartd
Any ideas where to start?
klogd 1.4.1, log source = ksyslog started.
<6>[ 0.000000] Initializing cgroup subsys cpuset
<6>[ 0.000000] Initializing cgroup subsys cpu
<5>[ 0.000000] Linux version 3.0.101-0.5-default (geeko@buildhost)
(gcc version 4.3.4 [gcc-4_3-branch revision 152973] (SUSE Linux) ) #1
SMP Thu Oct 31 05:21:34 UTC 2013 (36fae46)
<6>[ 0.000000] Command line:
root=/dev/disk/by-id/scsi-14d5346542020202030347929c4471f4a992f647d8c930037-part2
resume=/dev/disk/by-id/scsi-14d5346542020202030347929c4471f4a992f647d8c930037-part1
splash=silent crashkernel=256M-:128M vga=0x31a
<6>[ 0.000000] BIOS-provided physical RAM map:
<6>[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00
(usable)
<6>[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000
(reserved)
<6>[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000
(reserved)
<6>[ 0.000000] BIOS-e820: 0000000000100000 - 00000000f7ff0000
(usable)
<6>[ 0.000000] BIOS-e820: 00000000f7ff0000 - 00000000f7fff000 (ACPI
data)
<6>[ 0.000000] BIOS-e820: 00000000f7fff000 - 00000000f8000000 (ACPI
NVS)
<6>[ 0.000000] BIOS-e820: 0000000100000000 - 0000000208000000
(usable)
<6>[ 0.000000] NX (Execute Disable) protection: active
<6>[ 0.000000] DMI 2.3 present.
<7>[ 0.000000] DMI: Microsoft Corporation Virtual Machine/Virtual
Machine, BIOS 090006 05/23/2012
<6>[ 0.000000] Hypervisor detected: Microsoft HyperV
<6>[ 0.000000] HyperV: features 0xe7f, hints 0x2c
<7>[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000
(usable) ==> (reserved)
<7>[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000
(usable)
<6>[ 0.000000] No AGP bridge found
<6>[ 0.000000] last_pfn = 0x208000 max_arch_pfn = 0x400000000
<7>[ 0.000000] MTRR default type: uncachable
<7>[ 0.000000] MTRR fixed ranges enabled:
<7>[ 0.000000] 00000-9FFFF write-back
<7>[ 0.000000] A0000-DFFFF uncachable
<7>[ 0.000000] E0000-FFFFF write-back
<7>[ 0.000000] MTRR variable ranges enabled:
<7>[ 0.000000] 0 base 0000000000 mask FF00000000 write-back
<7>[ 0.000000] 1 base 0100000000 mask F000000000 write-back
<7>[ 0.000000] 2 disabled
<7>[ 0.000000] 3 disabled
<7>[ 0.000000] 4 disabled
<7>[ 0.000000] 5 disabled
<7>[ 0.000000] 6 disabled
<7>[ 0.000000] 7 disabled
<6>[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new
0x7010600070106
<6>[ 0.000000] last_pfn = 0xf7ff0 max_arch_pfn = 0x400000000
<6>[ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780
<7>[ 0.000000] initial memory mapped : 0 - 20000000
<7>[ 0.000000] Base memory trampoline at [ffff88000009a000] 9a000
size 20480
<6>[ 0.000000] init_memory_mapping:
0000000000000000-00000000f7ff0000
<7>[ 0.000000] 0000000000 - 00f7e00000 page 2M
<7>[ 0.000000] 00f7e00000 - 00f7ff0000 page 4k
<7>[ 0.000000] kernel direct mapping tables up to 0xf7feffff @ [mem
0x1fffa000-0x1fffffff]
<6>[ 0.000000] init_memory_mapping:
0000000100000000-0000000208000000
<7>[ 0.000000] 0100000000 - 0208000000 page 2M
<7>[ 0.000000] kernel direct mapping tables up to 0x207ffffff @ [mem
0xf7fea000-0xf7feffff]
<6>[ 0.000000] nmi ring buffer: 262144
<6>[ 0.000000] RAMDISK: 37905000 - 37ff0000
<6>[ 0.000000] Reserving 128MB of memory at 752MB for crashkernel
(System RAM: 8320MB)
<4>[ 0.000000] ACPI: RSDP 00000000000f56f0 00014 (v00 ACPIAM)
<4>[ 0.000000] ACPI: RSDT 00000000f7ff0000 00040 (v01 VRTUAL MICROSFT
05001223 MSFT 00000097)
<4>[ 0.000000] ACPI: FACP 00000000f7ff0200 00081 (v02 VRTUAL MICROSFT
05001223 MSFT 00000097)
<4>[ 0.000000] ACPI: DSDT 00000000f7ff1724 02E78 (v01 MSFTVM MSFTVM02
00000002 INTL 02002026)
<4>[ 0.000000] ACPI: FACS 00000000f7fff000 00040
<4>[ 0.000000] ACPI: WAET 00000000f7ff1480 00028 (v01 VRTUAL MICROSFT
05001223 MSFT 00000097)
<4>[ 0.000000] ACPI: SLIC 00000000f7ff14c0 00176 (v01 VRTUAL MICROSFT
05001223 MSFT 00000097)
<4>[ 0.000000] ACPI: OEM0 00000000f7ff16c0 00064 (v01 VRTUAL MICROSFT
05001223 MSFT 00000097)
<4>[ 0.000000] ACPI: SRAT 00000000f7ff0600 00100 (v02 VRTUAL MICROSFT
00000001 MSFT 00000001)
<4>[ 0.000000] ACPI: APIC 00000000f7ff0300 0024C (v01 VRTUAL MICROSFT
05001223 MSFT 00000097)
<4>[ 0.000000] ACPI: OEMB 00000000f7fff040 00064 (v01 VRTUAL MICROSFT
05001223 MSFT 00000097)
<7>[ 0.000000] ACPI: Local APIC address 0xfee00000
<6>[ 0.000000] SRAT: PXM 0 -> APIC 0x00 -> Node 0
<6>[ 0.000000] SRAT: PXM 0 -> APIC 0x01 -> Node 0
<6>[ 0.000000] SRAT: PXM 0 -> APIC 0x02 -> Node 0
<6>[ 0.000000] SRAT: PXM 0 -> APIC 0x03 -> Node 0
<6>[ 0.000000] SRAT: PXM 0 -> APIC 0x04 -> Node 0
<6>[ 0.000000] SRAT: PXM 0 -> APIC 0x05 -> Node 0
<6>[ 0.000000] SRAT: PXM 0 -> APIC 0x06 -> Node 0
<6>[ 0.000000] SRAT: PXM 0 -> APIC 0x07 -> Node 0
<6>[ 0.000000] SRAT: Node 0 PXM 0 0-f8000000
<6>[ 0.000000] SRAT: Node 0 PXM 0 100000000-208000000
<6>[ 0.000000] NUMA: Node 0 [0,f8000000) + [100000000,208000000) ->
[0,208000000)
<6>[ 0.000000] Initmem setup node 0
0000000000000000-0000000208000000
<6>[ 0.000000] NODE_DATA [0000000207f99000 - 0000000207fbffff]
<7>[ 0.000000] [ffffea0000000000-ffffea00071fffff] PMD ->
[ffff8801ff600000-ffff8802067fffff] on node 0
<4>[ 0.000000] Zone PFN ranges:
<4>[ 0.000000] DMA 0x00000010 -> 0x00001000
<4>[ 0.000000] DMA32 0x00001000 -> 0x00100000
<4>[ 0.000000] Normal 0x00100000 -> 0x00208000
<4>[ 0.000000] Movable zone start PFN for each node
<4>[ 0.000000] early_node_map[3] active PFN ranges
<4>[ 0.000000] 0: 0x00000010 -> 0x0000009f
<4>[ 0.000000] 0: 0x00000100 -> 0x000f7ff0
<4>[ 0.000000] 0: 0x00100000 -> 0x00208000
<7>[ 0.000000] On node 0 totalpages: 2097023
<7>[ 0.000000] DMA zone: 56 pages used for memmap
<7>[ 0.000000] DMA zone: 5 pages reserved
<7>[ 0.000000] DMA zone: 3922 pages, LIFO batch:0
<7>[ 0.000000] DMA32 zone: 14280 pages used for memmap
<7>[ 0.000000] DMA32 zone: 997416 pages, LIFO batch:31
<7>[ 0.000000] Normal zone: 14784 pages used for memmap
<7>[ 0.000000] Normal zone: 1066560 pages, LIFO batch:31
<6>[ 0.000000] ACPI: PM-Timer IO Port: 0x408
<7>[ 0.000000] ACPI: Local APIC address 0xfee00000
<6>[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
<6>[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
<6>[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
<6>[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
<6>[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x04] enabled)
<6>[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled)
<6>[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x06] enabled)
<6>[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
<6>[ 0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0x08] disabled)
<6>[ 0.000000] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x09] disabled)
<6>[ 0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x0a] disabled)
<6>[ 0.000000] ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x0b] disabled)
<6>[ 0.000000] ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x0c] disabled)
<6>[ 0.000000] ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x0d] disabled)
<6>[ 0.000000] ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x0e] disabled)
<6>[ 0.000000] ACPI: LAPIC (acpi_id[0x10] lapic_id[0x0f] disabled)
<6>[ 0.000000] ACPI: LAPIC (acpi_id[0x11] lapic_id[0x10] disabled)
<6>[ 0.000000] ACPI: LAPIC (acpi_id[0x12] lapic_id[0x11] disabled)
<6>[ 0.000000] ACPI: LAPIC (acpi_id[0x13] lapic_id[0x12] disabled)
<6>[ 0.000000] ACPI: LAPIC (acpi_id[0x14] lapic_id[0x13] disabled)
<6>[ 0.000000] ACPI: LAPIC (acpi_id[0x15] lapic_id[0x14] disabled)
<6>[ 0.000000] ACPI: LAPIC (acpi_id[0x16] lapic_id[0x15] disabled)
<6>[ 0.000000] ACPI: LAPIC (acpi_id[0x17] lapic_id[0x16] disabled)
<6>[ 0.000000] ACPI: LAPIC (acpi_id[0x18] lapic_id[0x17] disabled)
<6>[ 0.000000] ACPI: LAPIC (acpi_id[0x19] lapic_id[0x18] disabled)
<6>[ 0.000000] ACPI: LAPIC (acpi_id[0x1a] lapic_id[0x19] disabled)
<6>[ 0.000000] ACPI: LAPIC (acpi_id[0x1b] lapic_id[0x1a] disabled)
<6>[ 0.000000] ACPI: LAPIC (acpi_id[0x1c] lapic_id[0x1b] disabled)
<6>[ 0.000000] ACPI: LAPIC (acpi_id[0x1d] lapic_id[0x1c] disabled)
<6>[ 0.000000] ACPI: LAPIC (acpi_id[0x1e] lapic_id[0x1d] disabled)
<6>[ 0.000000] ACPI: LAPIC (acpi_id[0x1f] lapic_id[0x1e] disabled)
<6>[ 0.000000] ACPI: LAPIC (acpi_id[0x20] lapic_id[0x1f] disabled)
<6>[ 0.000000] ACPI: LAPIC (acpi_id[0x21] lapic_id[0x20] disabled)
<6>[ 0.000000] ACPI: LAPIC (acpi_id[0x22] lapic_id[0x21] disabled)
<6>[ 0.000000] ACPI: LAPIC (acpi_id[0x23] lapic_id[0x22] disabled)
<6>[ 0.000000] ACPI: LAPIC (acpi_id[0x24] lapic_id[0x23] disabled)
<6>[ 0.000000] ACPI: LAPIC (acpi_id[0x25] lapic_id[0x24] disabled)
<6>[ 0.000000] ACPI: LAPIC (acpi_id[0x26] lapic_id[0x25] disabled)
<6>[ 0.000000] ACPI: LAPIC (acpi_id[0x27] lapic_id[0x26] disabled)
<6>[ 0.000000] ACPI: LAPIC (acpi_id[0x28] lapic_id[0x27] disabled)
<6>[ 0.000000] ACPI: LAPIC (acpi_id[0x29] lapic_id[0x28] disabled)
<6>[ 0.000000] ACPI: LAPIC (acpi_id[0x2a] lapic_id[0x29] disabled)
<6>[ 0.000000] ACPI: LAPIC (acpi_id[0x2b] lapic_id[0x2a] disabled)
<6>[ 0.000000] ACPI: LAPIC (acpi_id[0x2c] lapic_id[0x2b] disabled)
<6>[ 0.000000] ACPI: LAPIC (acpi_id[0x2d] lapic_id[0x2c] disabled)
<6>[ 0.000000] ACPI: LAPIC (acpi_id[0x2e] lapic_id[0x2d] disabled)
<6>[ 0.000000] ACPI: LAPIC (acpi_id[0x2f] lapic_id[0x2e] disabled)
<6>[ 0.000000] ACPI: LAPIC (acpi_id[0x30] lapic_id[0x2f] disabled)
<6>[ 0.000000] ACPI: LAPIC (acpi_id[0x31] lapic_id[0x30] disabled)
<6>[ 0.000000] ACPI: LAPIC (acpi_id[0x32] lapic_id[0x31] disabled)
<6>[ 0.000000] ACPI: LAPIC (acpi_id[0x33] lapic_id[0x32] disabled)
<6>[ 0.000000] ACPI: LAPIC (acpi_id[0x34] lapic_id[0x33] disabled)
<6>[ 0.000000] ACPI: LAPIC (acpi_id[0x35] lapic_id[0x34] disabled)
<6>[ 0.000000] ACPI: LAPIC (acpi_id[0x36] lapic_id[0x35] disabled)
<6>[ 0.000000] ACPI: LAPIC (acpi_id[0x37] lapic_id[0x36] disabled)
<6>[ 0.000000] ACPI: LAPIC (acpi_id[0x38] lapic_id[0x37] disabled)
<6>[ 0.000000] ACPI: LAPIC (acpi_id[0x39] lapic_id[0x38] disabled)
<6>[ 0.000000] ACPI: LAPIC (acpi_id[0x3a] lapic_id[0x39] disabled)
<6>[ 0.000000] ACPI: LAPIC (acpi_id[0x3b] lapic_id[0x3a] disabled)
<6>[ 0.000000] ACPI: LAPIC (acpi_id[0x3c] lapic_id[0x3b] disabled)
<6>[ 0.000000] ACPI: LAPIC (acpi_id[0x3d] lapic_id[0x3c] disabled)
<6>[ 0.000000] ACPI: LAPIC (acpi_id[0x3e] lapic_id[0x3d] disabled)
<6>[ 0.000000] ACPI: LAPIC (acpi_id[0x3f] lapic_id[0x3e] disabled)
<6>[ 0.000000] ACPI: LAPIC (acpi_id[0x40] lapic_id[0x3f] disabled)
<6>[ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000]
gsi_base[0])
<6>[ 0.000000] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000,
GSI 0-23
<6>[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl
dfl)
<6>[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high
level)
<7>[ 0.000000] ACPI: IRQ0 used by override.
<7>[ 0.000000] ACPI: IRQ2 used by override.
<7>[ 0.000000] ACPI: IRQ9 used by override.
<6>[ 0.000000] Using ACPI (MADT) for SMP configuration information
<6>[ 0.000000] SMP: Allowing 64 CPUs, 56 hotplug CPUs
<7>[ 0.000000] nr_irqs_gsi: 40
<6>[ 0.000000] PM: Registered nosave memory: 000000000009f000 -
00000000000a0000
<6>[ 0.000000] PM: Registered nosave memory: 00000000000a0000 -
00000000000e0000
<6>[ 0.000000] PM: Registered nosave memory: 00000000000e0000 -
0000000000100000
<6>[ 0.000000] PM: Registered nosave memory: 00000000f7ff0000 -
00000000f7fff000
<6>[ 0.000000] PM: Registered nosave memory: 00000000f7fff000 -
00000000f8000000
<6>[ 0.000000] PM: Registered nosave memory: 00000000f8000000 -
0000000100000000
<6>[ 0.000000] Allocating PCI resources starting at f8000000 (gap:
f8000000:8000000)
<6>[ 0.000000] Booting paravirtualized kernel on bare hardware
<6>[ 0.000000] setup_percpu: NR_CPUS:4096 nr_cpumask_bits:64
nr_cpu_ids:64 nr_node_ids:1
<6>[ 0.000000] PERCPU: Embedded 25 pages/cpu @ffff880206e00000 s73728
r8192 d20480 u131072
<7>[ 0.000000] pcpu-alloc: s73728 r8192 d20480 u131072
alloc=1*2097152
<7>[ 0.000000] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 08 09 10 11 12
13 14 15
<7>[ 0.000000] pcpu-alloc: [0] 16 17 18 19 20 21 22 23 24 25 26 27 28
29 30 31
<7>[ 0.000000] pcpu-alloc: [0] 32 33 34 35 36 37 38 39 40 41 42 43 44
45 46 47
<7>[ 0.000000] pcpu-alloc: [0] 48 49 50 51 52 53 54 55 56 57 58 59 60
61 62 63
<4>[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on.
Total pages: 2067898
<4>[ 0.000000] Policy zone: Normal
<5>[ 0.000000] Kernel command line:
root=/dev/disk/by-id/scsi-14d5346542020202030347929c4471f4a992f647d8c930037-part2
resume=/dev/disk/by-id/scsi-14d5346542020202030347929c4471f4a992f647d8c930037-part1
splash=silent crashkernel=256M-:128M vga=0x31a
<6>[ 0.000000] bootsplash: silent mode.
<6>[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
<6>[ 0.000000] Checking aperture...
<6>[ 0.000000] No AGP bridge found
<6>[ 0.000000] Memory: 8043808k/8519680k available (4433k kernel
code, 131588k absent, 344284k reserved, 7663k data, 1336k init)
<6>[ 0.000000] Hierarchical RCU implementation.
<6>[ 0.000000] RCU dyntick-idle grace-period acceleration is
enabled.
<6>[ 0.000000] NR_IRQS:262400 nr_irqs:1192 16
<6>[ 0.000000] Console: colour dummy device 80x25
<6>[ 0.000000] console [tty0] enabled
<6>[ 0.000000] allocated 67108864 bytes of page_cgroup
<6>[ 0.000000] please try 'cgroup_disable=memory' option if you don't
want memory cgroups
<4>[ 0.000000] Fast TSC calibration failed
<4>[ 0.000000] TSC: Unable to calibrate against PIT
<6>[ 0.000000] TSC: using PMTIMER reference calibration
<4>[ 0.000000] Detected 3324.942 MHz processor.
<6>[ 0.012014] Calibrating delay loop (skipped), value calculated
using timer frequency.. 6649.88 BogoMIPS (lpj=13299768)
<6>[ 0.012022] pid_max: default: 65536 minimum: 512
<4>[ 0.012304] kdb version 4.4 by Keith Owens, Scott Lurndal.
Copyright SGI, All Rights Reserved
<6>[ 0.012548] Security Framework initialized
<6>[ 0.012570] AppArmor: AppArmor initialized
<6>[ 0.013339] Dentry cache hash table entries: 1048576 (order: 11,
8388608 bytes)
<6>[ 0.017041] Inode-cache hash table entries: 524288 (order: 10,
4194304 bytes)
<6>[ 0.018119] Mount-cache hash table entries: 256
<6>[ 0.018332] Initializing cgroup subsys cpuacct
<6>[ 0.018347] Initializing cgroup subsys memory
<6>[ 0.018376] Initializing cgroup subsys devices
<6>[ 0.018381] Initializing cgroup subsys freezer
<6>[ 0.018384] Initializing cgroup subsys net_cls
<6>[ 0.018388] Initializing cgroup subsys blkio
<6>[ 0.018396] Initializing cgroup subsys perf_event
<6>[ 0.021490] CPU: Physical Processor ID: 0
<6>[ 0.021495] CPU: Processor Core ID: 0
<6>[ 0.021500] mce: CPU supports 1 MCE banks
<6>[ 0.121088] ACPI: Core revision 20110413
<6>[ 0.124121] Switched APIC routing to physical flat.
<6>[ 0.204012] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
<6>[ 0.251460] CPU0: Intel(R) Xeon(R) CPU X5680 @ 3.33GHz
stepping 02
<6>[ 0.252015] Performance Events: unsupported p6 CPU model 44 no PMU
driver, software events only.
<4>[ 0.252015] NMI watchdog disabled (cpu0): hardware events not
enabled
<6>[ 0.252015] Booting Node 0, Processors #1
<7>[ 0.252015] smpboot cpu 1: start_ip = 9a000
<4>[ 0.264045] NMI watchdog disabled (cpu1): hardware events not
enabled
<4>[ 0.264188] #2
<7>[ 0.264191] smpboot cpu 2: start_ip = 9a000
<4>[ 0.284043] NMI watchdog disabled (cpu2): hardware events not
enabled
<4>[ 0.284180] #3
<7>[ 0.284183] smpboot cpu 3: start_ip = 9a000
<4>[ 0.300049] NMI watchdog disabled (cpu3): hardware events not
enabled
<4>[ 0.300226] #4
<7>[ 0.300229] smpboot cpu 4: start_ip = 9a000
<4>[ 0.320046] NMI watchdog disabled (cpu4): hardware events not
enabled
<4>[ 0.320185] #5
<7>[ 0.320188] smpboot cpu 5: start_ip = 9a000
<4>[ 0.336048] NMI watchdog disabled (cpu5): hardware events not
enabled
<4>[ 0.336208] #6
<7>[ 0.336211] smpboot cpu 6: start_ip = 9a000
<4>[ 0.356059] NMI watchdog disabled (cpu6): hardware events not
enabled
<4>[ 0.356212] #7
<7>[ 0.356215] smpboot cpu 7: start_ip = 9a000
<4>[ 0.376049] NMI watchdog disabled (cpu7): hardware events not
enabled
<6>[ 0.376084] Brought up 8 CPUs
<6>[ 0.376089] Total of 8 processors activated (53199.07 BogoMIPS).
<6>[ 0.396382] devtmpfs: initialized
<6>[ 0.403154] PM: Registering ACPI NVS region at f7fff000 (4096
bytes)
<6>[ 0.403154] print_constraints: dummy:
<6>[ 0.403154] Time: 16:35:52 Date: 12/27/13
<6>[ 0.404195] NET: Registered protocol family 16
<6>[ 0.404383] ACPI: bus type pci registered
<6>[ 0.404749] PCI: Using configuration type 1 for base access
<6>[ 0.405534] bio: create slab <bio-0> at 0
<7>[ 0.410275] ACPI: EC: Look up EC in DSDT
<6>[ 0.413902] ACPI: Interpreter enabled
<6>[ 0.413910] ACPI: (supports S0 S5)
<6>[ 0.413929] ACPI: Using IOAPIC for interrupt routing
<6>[ 0.426448] ACPI: No dock devices found.
<6>[ 0.426456] PCI: Using host bridge windows from ACPI; if
necessary, use "pci=nocrs" and report a bug
<6>[ 0.427535] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus
00-ff])
<6>[ 0.429730] pci_root PNP0A03:00: host bridge window [mem
0xfe0000000-0xfffefffff]
<6>[ 0.429738] pci_root PNP0A03:00: host bridge window [io
0x0000-0x0cf7]
<6>[ 0.429743] pci_root PNP0A03:00: host bridge window [io
0x0d00-0xffff]
<6>[ 0.429748] pci_root PNP0A03:00: host bridge window [mem
0x000a0000-0x000bffff]
<6>[ 0.429754] pci_root PNP0A03:00: host bridge window [mem
0xf8000000-0xfffbffff]
<7>[ 0.429922] pci 0000:00:00.0: [8086:7192] type 0 class 0x000600
<7>[ 0.431592] pci 0000:00:07.0: [8086:7110] type 0 class 0x000601
<7>[ 0.434290] pci 0000:00:07.1: [8086:7111] type 0 class 0x000101
<7>[ 0.436389] pci 0000:00:07.1: reg 20: [io 0xffa0-0xffaf]
<7>[ 0.437608] pci 0000:00:07.3: [8086:7113] type 0 class 0x000680
<4>[ 0.437647] * Found PM-Timer Bug on the chipset. Due to
workarounds for a bug,
<4>[ 0.437649] * this clock source is slow. Consider trying other
clock sources
<6>[ 0.439685] pci 0000:00:07.3: quirk: [io 0x0400-0x043f] claimed
by PIIX4 ACPI
<7>[ 0.440542] pci 0000:00:08.0: [1414:5353] type 0 class 0x000300
<7>[ 0.442475] pci 0000:00:08.0: reg 10: [mem 0xf8000000-0xfbffffff]
<7>[ 0.445307] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
<6>[ 0.445568] pci0000:00: Unable to request _OSC control (_OSC
support mask: 0x1e)
<6>[ 0.446013] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11
12 14 15)
<6>[ 0.446236] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 11
12 14 15) *0, disabled.
<6>[ 0.446462] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 11
12 14 15) *0, disabled.
<6>[ 0.446686] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 11
12 14 15) *0, disabled.
<6>[ 0.446918] vgaarb: device added:
PCI:0000:00:08.0,decodes=io+mem,owns=io+mem,locks= none
<6>[ 0.446926] vgaarb: loaded
<6>[ 0.447035] PCI: Using ACPI for IRQ routing
<7>[ 0.447035] PCI: pci_cache_line_size set to 64 bytes
<7>[ 0.447035] reserve RAM buffer: 000000000009fc00 -
000000000009ffff
<7>[ 0.447035] reserve RAM buffer: 00000000f7ff0000 -
00000000f7ffffff
<6>[ 0.447035] NetLabel: Initializing
<6>[ 0.447035] NetLabel: domain hash size = 128
<6>[ 0.447035] NetLabel: protocols = UNLABELED CIPSOv4
<6>[ 0.447035] NetLabel: unlabeled traffic allowed by default
<6>[ 0.447035] Switching to clocksource hyperv_clocksource
<6>[ 0.447035] AppArmor: AppArmor Filesystem Enabled
<6>[ 0.447035] pnp: PnP ACPI init
<6>[ 0.447035] ACPI: bus type pnp registered
<7>[ 0.447832] pnp 00:00: [mem 0xfe0000000-0xfffefffff window]
<7>[ 0.447836] pnp 00:00: [bus 00-ff]
<7>[ 0.447838] pnp 00:00: [io 0x0cf8-0x0cff]
<7>[ 0.447841] pnp 00:00: [io 0x0000-0x0cf7 window]
<7>[ 0.447844] pnp 00:00: [io 0x0d00-0xffff window]
<7>[ 0.447847] pnp 00:00: [mem 0x000a0000-0x000bffff window]
<7>[ 0.447849] pnp 00:00: [mem 0x00000000 window]
<7>[ 0.447852] pnp 00:00: [mem 0xf8000000-0xfffbffff window]
<7>[ 0.447893] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03
(active)
<7>[ 0.447932] pnp 00:01: [dma 4]
<7>[ 0.447934] pnp 00:01: [io 0x0000-0x000f]
<7>[ 0.447937] pnp 00:01: [io 0x0081-0x0083]
<7>[ 0.447939] pnp 00:01: [io 0x0087]
<7>[ 0.447941] pnp 00:01: [io 0x0089-0x008b]
<7>[ 0.447944] pnp 00:01: [io 0x008f]
<7>[ 0.447946] pnp 00:01: [io 0x00c0-0x00df]
<7>[ 0.447974] pnp 00:01: Plug and Play ACPI device, IDs PNP0200
(active)
<7>[ 0.447990] pnp 00:02: [io 0x0070-0x0071]
<7>[ 0.452329] pnp 00:02: [irq 8]
<7>[ 0.452369] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00
(active)
<7>[ 0.452425] pnp 00:03: [io 0x0060]
<7>[ 0.452428] pnp 00:03: [io 0x0064]
<7>[ 0.455932] pnp 00:03: [irq 1]
<7>[ 0.455975] pnp 00:03: Plug and Play ACPI device, IDs PNP0303
PNP030b (active)
<7>[ 0.458641] pnp 00:04: [irq 12]
<7>[ 0.458684] pnp 00:04: Plug and Play ACPI device, IDs PNP0f03
PNP0f13 (active)
<7>[ 0.458703] pnp 00:05: [io 0x0061]
<7>[ 0.458735] pnp 00:05: Plug and Play ACPI device, IDs PNP0800
(active)
<7>[ 0.458749] pnp 00:06: [io 0x00f0-0x00ff]
<7>[ 0.461312] pnp 00:06: [irq 13]
<7>[ 0.461353] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04
(active)
<7>[ 0.463988] pnp 00:07: [irq 4]
<7>[ 0.463992] pnp 00:07: [dma 0 disabled]
<7>[ 0.463995] pnp 00:07: [io 0x03f8-0x03ff]
<7>[ 0.464054] pnp 00:07: Plug and Play ACPI device, IDs PNP0501
(active)
<7>[ 0.466278] pnp 00:08: [irq 3]
<7>[ 0.466282] pnp 00:08: [dma 0 disabled]
<7>[ 0.466284] pnp 00:08: [io 0x02f8-0x02ff]
<7>[ 0.466344] pnp 00:08: Plug and Play ACPI device, IDs PNP0501
(active)
<7>[ 0.468615] pnp 00:09: [irq 6]
<7>[ 0.468618] pnp 00:09: [dma 2]
<7>[ 0.468621] pnp 00:09: [io 0x03f0-0x03f5]
<7>[ 0.468623] pnp 00:09: [io 0x03f7]
<7>[ 0.468696] pnp 00:09: Plug and Play ACPI device, IDs PNP0700
(active)
<7>[ 0.468714] pnp 00:0a: [io 0x0010-0x001f]
<7>[ 0.468717] pnp 00:0a: [io 0x0022-0x003f]
<7>[ 0.468719] pnp 00:0a: [io 0x0044-0x005f]
<7>[ 0.468721] pnp 00:0a: [io 0x0062-0x0063]
<7>[ 0.468723] pnp 00:0a: [io 0x0065-0x006f]
<7>[ 0.468725] pnp 00:0a: [io 0x0072-0x007f]
<7>[ 0.468728] pnp 00:0a: [io 0x0080]
<7>[ 0.468732] pnp 00:0a: [io 0x0084-0x0086]
<7>[ 0.468734] pnp 00:0a: [io 0x0088]
<7>[ 0.468736] pnp 00:0a: [io 0x008c-0x008e]
<7>[ 0.468738] pnp 00:0a: [io 0x0090-0x009f]
<7>[ 0.468741] pnp 00:0a: [io 0x00a2-0x00bf]
<7>[ 0.468743] pnp 00:0a: [io 0x00e0-0x00ef]
<7>[ 0.468745] pnp 00:0a: [io 0x01e0-0x01ef]
<7>[ 0.468747] pnp 00:0a: [io 0x0160-0x016f]
<7>[ 0.468749] pnp 00:0a: [io 0x0278-0x027f]
<7>[ 0.468752] pnp 00:0a: [io 0x0378-0x037f]
<7>[ 0.468754] pnp 00:0a: [io 0x0678-0x067f]
<7>[ 0.468756] pnp 00:0a: [io 0x0778-0x077f]
<7>[ 0.468758] pnp 00:0a: [io 0x04d0-0x04d1]
<6>[ 0.468806] system 00:0a: [io 0x01e0-0x01ef] has been reserved
<6>[ 0.468814] system 00:0a: [io 0x0160-0x016f] has been reserved
<6>[ 0.468819] system 00:0a: [io 0x0278-0x027f] has been reserved
<6>[ 0.468824] system 00:0a: [io 0x0378-0x037f] has been reserved
<6>[ 0.468829] system 00:0a: [io 0x0678-0x067f] has been reserved
<6>[ 0.468834] system 00:0a: [io 0x0778-0x077f] has been reserved
<6>[ 0.468839] system 00:0a: [io 0x04d0-0x04d1] has been reserved
<7>[ 0.468844] system 00:0a: Plug and Play ACPI device, IDs PNP0c02
(active)
<7>[ 0.469099] pnp 00:0b: [io 0x0400-0x043f]
<7>[ 0.469102] pnp 00:0b: [io 0x0370-0x0371]
<7>[ 0.469105] pnp 00:0b: [io 0x0000-0xffffffffffffffff disabled]
<7>[ 0.469107] pnp 00:0b: [io 0x0440-0x044f]
<7>[ 0.469110] pnp 00:0b: [mem 0xfec00000-0xfec00fff]
<7>[ 0.469112] pnp 00:0b: [mem 0xfee00000-0xfee00fff]
<6>[ 0.469153] system 00:0b: [io 0x0400-0x043f] has been reserved
<6>[ 0.469159] system 00:0b: [io 0x0370-0x0371] has been reserved
<6>[ 0.469164] system 00:0b: [io 0x0440-0x044f] has been reserved
<6>[ 0.469169] system 00:0b: [mem 0xfec00000-0xfec00fff] could not be
reserved
<6>[ 0.469175] system 00:0b: [mem 0xfee00000-0xfee00fff] has been
reserved
<7>[ 0.469180] system 00:0b: Plug and Play ACPI device, IDs PNP0c02
(active)
<7>[ 0.469364] pnp 00:0c: [mem 0x00000000-0x0009ffff]
<7>[ 0.469367] pnp 00:0c: [mem 0x000c0000-0x000dffff]
<7>[ 0.469370] pnp 00:0c: [mem 0x000e0000-0x000fffff]
<7>[ 0.469372] pnp 00:0c: [mem 0x00100000-0xf7ffffff]
<7>[ 0.469374] pnp 00:0c: [mem 0xfffc0000-0xffffffff]
<6>[ 0.469417] system 00:0c: [mem 0x00000000-0x0009ffff] could not be
reserved
<6>[ 0.469423] system 00:0c: [mem 0x000c0000-0x000dffff] could not be
reserved
<6>[ 0.469429] system 00:0c: [mem 0x000e0000-0x000fffff] could not be
reserved
<6>[ 0.469434] system 00:0c: [mem 0x00100000-0xf7ffffff] could not be
reserved
<6>[ 0.469439] system 00:0c: [mem 0xfffc0000-0xffffffff] has been
reserved
<7>[ 0.469445] system 00:0c: Plug and Play ACPI device, IDs PNP0c01
(active)
<6>[ 0.469782] pnp: PnP ACPI: found 13 devices
<6>[ 0.469787] ACPI: ACPI bus type pnp unregistered
<7>[ 0.476082] PCI: max bus depth: 0 pci_try_num: 1
<7>[ 0.476089] pci_bus 0000:00: resource 4 [mem
0xfe0000000-0xfffefffff]
<7>[ 0.476092] pci_bus 0000:00: resource 5 [io 0x0000-0x0cf7]
<7>[ 0.476094] pci_bus 0000:00: resource 6 [io 0x0d00-0xffff]
<7>[ 0.476097] pci_bus 0000:00: resource 7 [mem
0x000a0000-0x000bffff]
<7>[ 0.476100] pci_bus 0000:00: resource 8 [mem
0xf8000000-0xfffbffff]
<6>[ 0.477048] NET: Registered protocol family 2
<6>[ 0.477558] IP route cache hash table entries: 262144 (order: 9,
2097152 bytes)
<6>[ 0.479416] TCP established hash table entries: 524288 (order: 11,
8388608 bytes)
<6>[ 0.481075] TCP bind hash table entries: 65536 (order: 8, 1048576
bytes)
<6>[ 0.481261] TCP: Hash tables configured (established 524288 bind
65536)
<6>[ 0.481266] TCP reno registered
<6>[ 0.481283] UDP hash table entries: 4096 (order: 5, 131072 bytes)
<6>[ 0.481335] UDP-Lite hash table entries: 4096 (order: 5, 131072
bytes)
<6>[ 0.482109] NET: Registered protocol family 1
<6>[ 0.482125] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
<7>[ 0.482366] pci 0000:00:08.0: Boot video device
<7>[ 0.482406] PCI: CLS 0 bytes, default 64
<6>[ 0.482455] Unpacking initramfs...
<6>[ 0.659642] Freeing initrd memory: 7084k freed
<6>[ 0.661052] PCI-DMA: Using software bounce buffering for IO
(SWIOTLB)
<6>[ 0.661059] Placing 64MB software IO TLB between ffff8800f3fea000
- ffff8800f7fea000
<6>[ 0.661064] software IO TLB at phys 0xf3fea000 - 0xf7fea000
<6>[ 0.668188] audit: initializing netlink socket (disabled)
<5>[ 0.668208] type=2000 audit(1388162152.664:1): initialized
<4>[ 0.702880] bounce pool size: 64 pages
<6>[ 0.702891] HugeTLB registered 2 MB page size, pre-allocated 0
pages
<5>[ 0.706769] VFS: Disk quotas dquot_6.5.2
<4>[ 0.706943] Dquot-cache hash table entries: 512 (order 0, 4096
bytes)
<6>[ 0.707274] msgmni has been set to 3931
<6>[ 0.707604] alg: No test for stdrng (krng)
<6>[ 0.707718] Block layer SCSI generic (bsg) driver version 0.4
loaded (major 253)
<6>[ 0.707801] io scheduler noop registered
<6>[ 0.707806] io scheduler deadline registered
<6>[ 0.708005] io scheduler cfq registered (default)
<6>[ 0.708249] vesafb: mode is 1280x1024x16, linelength=2560,
pages=0
<6>[ 0.708254] vesafb: scrolling: redraw
<6>[ 0.708258] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
<6>[ 0.708929] vesafb: framebuffer at 0xf8000000, mapped to
0xffffc90001800000, using 4096k, total 4096k
<6>[ 0.709049] bootsplash 3.2.0-2010/03/31: looking for picture...
<6>[ 0.709052] bootsplash: silentjpeg size 74123 bytes
<6>[ 0.731946] bootsplash: ...found (1280x1024, 40629 bytes, v3).
<6>[ 0.780927] Console: switching to colour frame buffer device
156x60
<6>[ 0.828743] fb0: VESA VGA frame buffer device
<6>[ 0.828882] Serial: 8250/16550 driver, 8 ports, IRQ sharing
disabled
<6>[ 0.831332] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
<6>[ 0.846410] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
<6>[ 0.933902] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
<6>[ 0.945594] 00:08: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
<6>[ 0.955274] Non-volatile memory driver v1.3
<6>[ 0.955280] Linux agpgart interface v0.103
<6>[ 0.955379] Fixed MDIO Bus: probed
<6>[ 0.955441] i8042: PNP: PS/2 Controller
[PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
<6>[ 0.969808] serio: i8042 KBD port at 0x60,0x64 irq 1
<6>[ 0.969825] serio: i8042 AUX port at 0x60,0x64 irq 12
<6>[ 0.969915] mousedev: PS/2 mouse device common for all mice
<6>[ 0.970155] cpuidle: using governor ladder
<6>[ 0.970161] cpuidle: using governor menu
<6>[ 0.970165] EFI Variables Facility v0.08 2004-May-17
<6>[ 0.970592] TCP cubic registered
<5>[ 0.970609] Registering the dns_resolver key type
<7>[ 0.970721] PM: Checking hibernation image partition
/dev/disk/by-id/scsi-14d5346542020202030347929c4471f4a992f647d8c930037-part1
<6>[ 1.008486] input: AT Translated Set 2 keyboard as
/devices/platform/i8042/serio0/input/input0
<4>[ 1.216294] trackpoint.c: failed to get extended button data
<6>[ 1.695523] Refined TSC clocksource calibration: 3324.999 MHz.
<6>[ 4.400574] IBM TrackPoint firmware: 0x01, buttons: 0/0
<6>[ 4.402228] input: TPPS/2 IBM TrackPoint as
/devices/platform/i8042/serio1/input/input1
<7>[ 4.402999] PM: Hibernation image not present or could not be
loaded.
<6>[ 4.403017] registered taskstats version 1
<6>[ 4.404389] Magic number: 9:792:591
<6>[ 4.409458] Freeing unused kernel memory: 1336k freed
<6>[ 4.409736] Write protecting the kernel read-only data: 10240k
<6>[ 4.417078] Freeing unused kernel memory: 1692k freed
<6>[ 4.421718] Freeing unused kernel memory: 1000k freed
<5>[ 4.495042] SCSI subsystem initialized
<7>[ 4.497920] libata version 3.00 loaded.
<7>[ 4.504287] ata_piix 0000:00:07.1: version 2.13
<6>[ 4.504462] ata_piix 0000:00:07.1: Hyper-V Virtual Machine
detected, ATA device ignore set
<7>[ 4.504682] ata_piix 0000:00:07.1: setting latency timer to 64
<6>[ 4.508495] scsi0 : ata_piix
<6>[ 4.509022] scsi1 : ata_piix
<6>[ 4.510514] ata1: PATA max UDMA/33 cmd 0x1f0 ctl 0x3f6 bmdma
0xffa0 irq 14
<6>[ 4.510655] ata2: PATA max UDMA/33 cmd 0x170 ctl 0x376 bmdma
0xffa8 irq 15
<6>[ 4.677885] ata2.00: ATAPI: Virtual CD, , max MWDMA2
<7>[ 4.678807] ata1.00: host indicates ignore ATA devices, ignored
<6>[ 4.678980] ata1.01: ATAPI: Virtual CD, , max MWDMA2
<6>[ 4.681960] ata2.00: configured for MWDMA2
<6>[ 4.683187] ata1.01: configured for MWDMA2
<5>[ 4.687680] scsi 0:0:1:0: CD-ROM Msft Virtual
CD/ROM 1.0 PQ: 0 ANSI: 5
<5>[ 4.689758] scsi 1:0:0:0: CD-ROM Msft Virtual
CD/ROM 1.0 PQ: 0 ANSI: 5
<6>[ 4.708425] hv_vmbus: Hyper-V Host OS Build:9200-6.2-16-0.16729
<6>[ 4.712400] hv_vmbus: Negotiated host information 13
<6>[ 4.712845] hv_vmbus: child device vmbus_0_1 registered
<6>[ 4.713110] hv_vmbus: child device vmbus_0_2 registered
<6>[ 4.713394] hv_vmbus: child device vmbus_0_3 registered
<6>[ 4.713669] hv_vmbus: child device vmbus_0_4 registered
<6>[ 4.713974] hv_vmbus: child device vmbus_0_5 registered
<6>[ 4.714247] hv_vmbus: child device vmbus_0_6 registered
<6>[ 4.714521] hv_vmbus: child device vmbus_0_7 registered
<6>[ 4.714799] hv_vmbus: child device vmbus_0_8 registered
<6>[ 4.715094] hv_vmbus: child device vmbus_0_9 registered
<6>[ 4.715367] hv_vmbus: child device vmbus_0_10 registered
<6>[ 4.715643] hv_vmbus: child device vmbus_0_11 registered
<6>[ 4.715912] hv_vmbus: child device vmbus_0_12 registered
<6>[ 9.693609] hv_vmbus: registering driver hv_storvsc
<6>[ 9.694468] scsi2 : storvsc_host_t
<5>[ 9.695151] scsi 2:0:0:0: Direct-Access Msft Virtual Disk
1.0 PQ: 0 ANSI: 4
<6>[ 9.695843] scsi3 : storvsc_host_t
<6>[ 9.696625] scsi scan: INQUIRY result too short (5), using 36
<5>[ 9.697436] scsi 3:0:0:1: Direct-Access Msft Virtual Disk
1.0 PQ: 0 ANSI: 4
<6>[ 9.698016] scsi scan: INQUIRY result too short (5), using 36
<6>[ 14.687376] hp_sw: device handler registered
<6>[ 14.695768] rdac: device handler registered
<6>[ 14.703207] alua: device handler registered
<6>[ 14.711258] emc: device handler registered
<6>[ 14.716329] udev: starting version 147
<7>[ 14.744338] ACPI: acpi_idle registered with cpuidle
<6>[ 14.749183] hv_vmbus: registering driver hv_netvsc
<6>[ 14.750531] hv_netvsc: hv_netvsc channel opened successfully
<5>[ 14.754431] sd 2:0:0:0: [sda] 83886080 512-byte logical blocks:
(42.9 GB/40.0 GiB)
<5>[ 14.754627] sd 3:0:0:1: [sdb] 1048576000 512-byte logical blocks:
(536 GB/500 GiB)
<5>[ 14.754770] sd 2:0:0:0: [sda] Write Protect is off
<7>[ 14.754920] sd 2:0:0:0: [sda] Mode Sense: 0f 00 00 00
<5>[ 14.754929] sd 3:0:0:1: [sdb] Write Protect is off
<7>[ 14.755076] sd 3:0:0:1: [sdb] Mode Sense: 0f 00 00 00
<5>[ 14.755136] sd 2:0:0:0: [sda] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
<5>[ 14.755365] sd 3:0:0:1: [sdb] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
<6>[ 14.756100] sdb: sdb1
<5>[ 14.756539] sd 3:0:0:1: [sdb] Attached SCSI disk
<6>[ 14.760677] sda: sda1 sda2
<5>[ 14.761170] sd 2:0:0:0: [sda] Attached SCSI disk
<6>[ 14.853739] hv_netvsc vmbus_0_11: Device MAC 00:15:5d:06:83:03
link state up
<7>[ 19.909479] PM: Marking nosave pages: 000000000009f000 -
0000000000100000
<7>[ 19.909485] PM: Marking nosave pages: 00000000f7ff0000 -
0000000100000000
<7>[ 19.909724] PM: Basic memory bitmaps created
<7>[ 19.948242] PM: Basic memory bitmaps freed
<6>[ 19.959506] PM: Starting manual resume from disk
<7>[ 19.959648] PM: Hibernation image partition 8:1 present
<7>[ 19.959650] PM: Looking for hibernation image.
<7>[ 19.961619] PM: Image not found (code -22)
<7>[ 19.961622] PM: Hibernation image not present or could not be
loaded.
<6>[ 20.136385] kjournald starting. Commit interval 15 seconds
<6>[ 20.136764] EXT3-fs (sda2): using internal journal
<6>[ 20.136899] EXT3-fs (sda2): mounted filesystem with ordered data
mode
<6>[ 21.569339] udev: starting version 147
<4>[ 21.628664] sr0: scsi3-mmc drive: 0x/0x tray
<6>[ 21.628807] cdrom: Uniform CD-ROM driver Revision: 3.20
<7>[ 21.629053] sr 0:0:1:0: Attached scsi CD-ROM sr0
<4>[ 21.632902] sr1: scsi3-mmc drive: 0x/0x tray
<7>[ 21.633138] sr 1:0:0:0: Attached scsi CD-ROM sr1
<5>[ 21.670559] sr 0:0:1:0: Attached scsi generic sg0 type 5
<5>[ 21.670736] sr 1:0:0:0: Attached scsi generic sg1 type 5
<5>[ 21.670913] sd 2:0:0:0: Attached scsi generic sg2 type 0
<5>[ 21.671088] sd 3:0:0:1: Attached scsi generic sg3 type 0
<6>[ 21.694963] input: PC Speaker as
/devices/platform/pcspkr/input/input2
<6>[ 21.738202] input: Power Button as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
<6>[ 21.738681] ACPI: Power Button [PWRF]
<6>[ 21.739750] hv_utils: Registering HyperV Utility Driver
<6>[ 21.739888] hv_vmbus: registering driver hv_util
<6>[ 21.741454] hv_vmbus: child device vmbus_0_5 unregistered
<3>[ 21.855470] piix4_smbus 0000:00:07.3: SMBus base address
uninitialized - upgrade BIOS or use force_addr=0xaddr
<6>[ 21.863250] Floppy drive(s): fd0 is 1.44M
<6>[ 21.890107] FDC 0 is an 82078.
<6>[ 21.937189] rtc_cmos 00:02: RTC can wake from S4
<6>[ 21.958729] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
<6>[ 21.964296] rtc0: alarms up to one month, 114 bytes nvram
<6>[ 22.068854] hv_vmbus: registering driver hid_hyperv
<6>[ 22.070603] input: Microsoft Vmbus HID-compliant Mouse as
/devices/virtual/input/input4
<6>[ 22.070814] hid 0006:045E:0621.0001: input: <UNKNOWN> HID v0.01
Mouse [Microsoft Vmbus HID-compliant Mouse] on
<6>[ 27.106125] Adding 2103292k swap on /dev/sda1. Priority:-1
extents:1 across:2103292k
<6>[ 28.737563] device-mapper: uevent: version 1.0.3
<6>[ 28.738201] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02)
initialised: [email protected]
<6>[ 29.026019] loop: module loaded
<6>[ 30.169641] fuse init (API version 7.16)
Kernel logging (ksyslog) stopped.
Kernel log daemon terminating.
Boot logging started on /dev/tty1(/dev/console) at Sat Dec 28 03:36:11
2013
Trying manual resume from
/dev/disk/by-id/scsi-14d5346542020202030347929c4471f4a992f647d8c930037-part1
Invoking userspace resume from
/dev/disk/by-id/scsi-14d5346542020202030347929c4471f4a992f647d8c930037-part1
resume: libgcrypt version: 1.5.0
Trying manual resume from
/dev/disk/by-id/scsi-14d5346542020202030347929c4471f4a992f647d8c930037-part1
Invoking in-kernel resume from
/dev/disk/by-id/scsi-14d5346542020202030347929c4471f4a992f647d8c930037-part1
Waiting for device
/dev/disk/by-id/scsi-14d5346542020202030347929c4471f4a992f647d8c930037-part2
to appear: ok
fsck from util-linux 2.19.1
[/sbin/fsck.ext3 (1) -- /] fsck.ext3 -a -C0 /dev/sda2
/dev/sda2: clean, 296531/2490368 files, 1999842/9959680 blocks
fsck succeeded. Mounting root device read-write.
Mounting root
/dev/disk/by-id/scsi-14d5346542020202030347929c4471f4a992f647d8c930037-part2
mount -o rw,acl,user_xattr -t ext3
/dev/disk/by-id/scsi-14d5346542020202030347929c4471f4a992f647d8c930037-part2
/root
Boot logging started on /dev/tty1(/dev/console) at Sat Dec 28 03:36:13
2013
<notice -- Dec 28 03:36:13.332905000>
boot.debugfs start
Mounting debugfs at /sys/kernel/debugdone
<notice -- Dec 28 03:36:13.369284000>
'boot.debugfs start' exits with status 0
<notice -- Dec 28 03:36:13.371108000>
boot.udev start
Starting udevd: done
Loading drivers, configuring devices: done
<notice -- Dec 27 20:10:55.354414000>
'boot.udev start' exits with status 0
<notice -- Dec 27 20:10:55.355966000>
boot.rootfsck start
Activating swap-devices in /etc/fstab...
done
<notice -- Dec 27 20:10:55.398783000>
'boot.rootfsck start' exits with status 0
<notice -- Dec 27 20:10:55.400577000>
boot.clock start
Set System Time to the current Hardware Clockdone
<notice -- Dec 27 20:10:56.942379000>
'boot.clock start' exits with status 0
<notice -- Dec 27 20:10:56.944352000>
boot.device-mapper start
Activating device mapper...
done
<notice -- Dec 27 20:10:57.20179000>
'boot.device-mapper start' exits with status 0
<notice -- Dec 27 20:10:57.22434000>
boot.loadmodules start
Loading required kernel modules
done
<notice -- Dec 27 20:10:57.46596000>
'boot.loadmodules start' exits with status 0
<notice -- Dec 27 20:10:57.48288000>
boot.md start
Starting MD RAID unused
<notice -- Dec 27 20:10:57.112371000>
'boot.md start' exits with status 6
<notice -- Dec 27 20:10:57.114441000>
boot.localfs start
Checking file systems...
fsck from util-linux 2.19.1
doneMounting local file systems...
proc on /proc type proc (rw)
sysfs on /sys type sysfs (rw)
debugfs on /sys/kernel/debug type debugfs (rw)
udev on /dev type tmpfs (rw,mode=0755)
tmpfs on /dev/shm type tmpfs (rw,mode=1777)
devpts on /dev/pts type devpts (rw,mode=0620,gid=5)
nothing was mounted
done
<notice -- Dec 27 20:10:57.331387000>
'boot.localfs start' exits with status 0
<notice -- Dec 27 20:10:57.332580000>
boot.compliance start
Check if the profiles matches the systemdone
<notice -- Dec 27 20:10:58.355993000>
'boot.compliance start' exits with status 0
<notice -- Dec 27 20:10:58.357530000>
boot.cycle start
<notice -- Dec 27 20:10:58.399207000>
'boot.cycle start' exits with status 6
<notice -- Dec 27 20:10:58.401339000>
boot.fuse start
Loading fuse module done
Mounting fuse control filesystemdone
<notice -- Dec 27 20:10:58.458495000>
'boot.fuse start' exits with status 0
<notice -- Dec 27 20:10:58.460101000>
boot.klog start
Creating /var/log/boot.msg
done
<notice -- Dec 27 20:10:58.549404000>
pidofproc: /sbin/blogd
407
<notice -- Dec 27 20:10:58.571980000>
killproc: kill(407,29)
<notice -- Dec 27 20:10:58.579244000> 'boot.klog start' exits with
status 0
<notice -- Dec 27 20:10:58.581541000> boot.lvm_monitor start
Enabling monitoring on LVM volume groups...
No volume groups found
done
<notice -- Dec 27 20:10:58.735165000> 'boot.lvm_monitor start' exits
with status 0
<notice -- Dec 27 20:10:58.736906000> boot.proc start
<notice -- Dec 27 20:10:58.773908000> 'boot.proc start' exits with
status 0
<notice -- Dec 27 20:10:58.775634000> boot.scpm start
<notice -- Dec 27 20:10:58.817985000> 'boot.scpm start' exits with
status 0
<notice -- Dec 27 20:10:58.819520000> boot.swap start
Activating remaining swap-devices in /etc/fstab...
done
<notice -- Dec 27 20:10:58.890568000>
'boot.swap start' exits with status 0
<notice -- Dec 27 20:10:58.892520000> boot.udev_retry start
<notice -- Dec 27 20:10:58.931843000>
'boot.udev_retry start' exits with status 0
<notice -- Dec 27 20:10:58.933759000> boot.ldconfig start
<notice -- Dec 27 20:10:59.80965000> 'boot.ldconfig start' exits with
status 0
<notice -- Dec 27 20:10:59.83077000> boot.quota start
Turning quota on
Checking quotas. This may take some time.
done
<notice -- Dec 27 20:10:59.144356000> 'boot.quota start' exits with
status 0
<notice -- Dec 27 20:10:59.146277000> boot.sysctl start
Setting current sysctl status from /etc/sysctl.confdone
<notice -- Dec 27 20:10:59.201868000> 'boot.sysctl start' exits with
status 0
<notice -- Dec 27 20:10:59.203812000> boot.cleanup start
<notice -- Dec 27 20:11:00.59571000> pidofproc: /sbin/blogd 407
<notice -- Dec 27 20:11:00.344682000>
'boot.cleanup start' exits with status 0
<notice -- Dec 27 20:11:00.346899000> boot.ipconfig start
Enabling syn flood protectiondone
Disabling IP forwardingdone
done
<notice -- Dec 27 20:11:00.396956000> 'boot.ipconfig start' exits with
status 0
<notice -- Dec 27 20:11:00.398786000> boot.apparmor start
Starting AppArmor Mounting securityfs on /sys/kernel/security done
done
<notice -- Dec 27 20:11:01.800318000> 'boot.apparmor start' exits with
status 0
<notice -- Dec 27 20:11:01.802316000> boot.localnet start
Setting up hostname 'rem-now-01'done
Setting up loopback interface lo
lo IP address: 127.0.0.1/8
IP address: 127.0.0.2/8
done
<notice -- Dec 27 20:11:02.188822000>
'boot.localnet start' exits with status 0
<notice -- Dec 27 20:11:02.190205000> boot.kdump start
Loading kdump
done
<notice -- Dec 27 20:11:02.907821000> 'boot.kdump start' exits with
status 0
System Boot Control: The system has been set up
Skipped features: boot.md boot.cycle
System Boot Control: Running /etc/init.d/boot.local
done
INIT: Entering runlevel: 5
Master Resource Control: previous runlevel: N, switching to runlevel: 5
<notice -- Dec 27 20:11:03.110539000> acpid start
Starting acpid
<notice -- Dec 27 20:11:03.153151000> startproc: execve (/sbin/acpid) [
/sbin/acpid ], [ CONSOLE=/dev/console SELINUX_INIT=YES
ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0
crashkernel=256M-:128M LC_ALL=POSIX INIT_VERSION=sysvinit-2.86
REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin
vga=0x31a DO_CONFIRM= RUNLEVEL=5 PWD=/
SPLASHCFG=/etc/bootsplash/themes/SLES/config/bootsplash-1280x1024.cfg
PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes
ROOTFS_BLKDEV=/dev/disk/by-id/scsi-14d5346542020202030347929c4471f4a992f647d8c930037-part2
_=/sbin/startproc DAEMON=/sbin/acpid ]
acpid: starting up
done
<notice -- Dec 27 20:11:03.166295000> 'acpid start' exits with status 0
<notice -- Dec 27 20:11:03.168126000>
dbus start
acpid: 2 rules loaded
Starting D-Bus daemondone
<notice -- Dec 27 20:11:03.428391000> 'dbus start' exits with status 0
<notice -- Dec 27 20:11:03.430244000> earlysyslog start
Starting syslog services
<notice -- Dec 27 20:11:03.492560000>
startproc: execve (/sbin/syslog-ng) [
/sbin/syslog-ng
SELINUX_INIT=YES
CONSOLE=/dev/console
ROOTFS_FSTYPE=ext3
TERM=linux
SHELL=/bin/sh
ROOTFS_FSCK=0
crashkernel=256M-:128M
LC_ALL=POSIX
INIT_VERSION=sysvinit-2.86
REDIRECT=/dev/tty1
COLUMNS=156
PATH=/bin:/sbin:/usr/bin:/usr/sbin
DO_CONFIRM=
vga=0x31a
RUNLEVEL=5
SPLASHCFG=/etc/bootsplash/themes/SLES/config/bootsplash-1280x1024.cfg
PWD=/
PREVLEVEL=N
LINES=60
SHLVL=2
HOME=/
SPLASH=yes
splash=silent
ROOTFS_BLKDEV=/dev/disk/by-id/scsi-14d5346542020202030347929c4471f4a992f647d8c930037-part2
_=/sbin/startproc
DAEMON=/sbin/syslog-ng
<notice -- Dec 27 20:11:03.559776000> startproc: execve (/sbin/klogd) [
/sbin/klogd -c 1 -x ], [ SELINUX_INIT=YES CONSOLE=/dev/console
ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0
crashkernel=256M-:128M LC_ALL=POSIX INIT_VERSION=sysvinit-2.86
REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin
DO_CONFIRM= vga=0x31a RUNLEVEL=5
SPLASHCFG=/etc/bootsplash/themes/SLES/config/bootsplash-1280x1024.cfg
PWD=/ PREVLEVEL=N LINES=60 SHLVL=2 HOME=/ SPLASH=yes splash=silent
ROOTFS_BLKDEV=/dev/disk/by-id/scsi-14d5346542020202030347929c4471f4a992f647d8c930037-part2
_=/sbin/startproc DAEMON=/sbin/klogd ]
done
<notice -- Dec 27 20:11:03.570513000> 'earlysyslog start' exits with
status 0
<notice -- Dec 27 20:11:03.572386000>
fbset start
<notice -- Dec 27 20:11:03.604926000> 'fbset start' exits with status 0
<notice -- Dec 27 20:11:03.606796000> micasad start
Starting miCASA daemondone
<notice -- Dec 27 20:11:05.737324000> 'micasad start' exits with status
0
<notice -- Dec 27 20:11:05.739136000> microcode.ctl start
Checking CPU.. upload Intel microcodedone
<notice -- Dec 27 20:11:05.995091000>
'microcode.ctl start' exits with status 0
<notice -- Dec 27 20:11:05.996419000> purge-kernels start
<notice -- Dec 27 20:11:06.24241000> 'purge-kernels start' exits with
status 0
<notice -- Dec 27 20:11:06.25539000> random start
Initializing random number generatordone
<notice -- Dec 27 20:11:06.81102000> 'random start' exits with status 0
<notice -- Dec 27 20:11:06.82673000> haldaemon start
Loading CPUFreq modules (CPUFreq not supported)
Starting HAL daemondone
<notice -- Dec 27 20:11:07.19742000> 'haldaemon start' exits with status
0
<notice -- Dec 27 20:11:07.21771000> network start
<notice -- Dec 27 20:11:07.219643000> checkproc: /sbin/udevd 442<notice
-- Dec 27 20:11:07.219718000> checkproc: /sbin/udevd 532<notice -- Dec
27 20:11:07.219728000> checkproc: /sbin/udevd 533<notice -- Dec 27
20:11:07.219735000> checkproc: /sbin/udevd 1409<notice -- Dec 27
20:11:07.219742000> checkproc: /sbin/udevd 1415<notice -- Dec 27
20:11:07.219749000> checkproc: /sbin/udevd 1416<notice -- Dec 27
20:11:07.219755000> checkproc: /sbin/udevd 1426<notice -- Dec 27
20:11:07.219762000> checkproc: /sbin/udevd 1427<notice -- Dec 27
20:11:07.219768000> checkproc: /sbin/udevd
1439<notice -- Dec 27 20:11:07.219774000> checkproc: /sbin/udevd
1440<notice -- Dec 27 20:11:07.219781000> checkproc: /sbin/udevd
1450<notice -- Dec 27 20:11:07.219787000> checkproc: /sbin/udevd
1453<notice -- Dec 27 20:11:07.219793000> checkproc: /sbin/udevd
1465<notice -- Dec 27 20:11:07.219800000> checkproc: /sbin/udevd
1466<notice -- Dec 27 20:11:07.219806000> checkproc: /sbin/udevd
1479<notice -- Dec 27 20:11:07.219812000> checkproc: /sbin/udevd
1480<notice -- Dec 27 20:11:07.219819000> checkproc: /sbin/udevd
1492<notice -- Dec 27 20:11:07.219825000> checkproc: /sbin/udevd
1493<notice -- Dec 27 20:11:07.219831000> checkproc: /sbin/udevd 1504
Setting up (localfs) network interfaces:
lo
lo IP address: 127.0.0.1/8
IP address: 127.0.0.2/8
done eth0 name: Virtual Ethernet Card 0
eth0 IP address: 192.168.0.10/24
doneSetting up service (localfs) network . . . . . . . . .
.done
<notice -- Dec 27 20:11:08.220701000> 'network start' exits with status
0
<notice -- Dec 27 20:11:08.222521000>
novell-httpstkd start
Starting the Novell Small Http Interface Daemon.
<notice -- Dec 27 20:11:08.455149000> 'novell-httpstkd start' exits with
status 0
<notice -- Dec 27 20:11:08.457662000>
syslog start
<notice -- Dec 27 20:11:08.477565000> 'syslog start' exits with status
0
<notice -- Dec 27 20:11:08.479072000> auditd start
Starting auditd
<notice -- Dec 27 20:11:08.525517000> startproc: execve (/sbin/auditd) [
/sbin/auditd -s disable ], [ CONSOLE=/dev/console SELINUX_INIT=YES
ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0
crashkernel=256M-:128M LC_ALL=POSIX INIT_VERSION=sysvinit-2.86
REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin
vga=0x31a DO_CONFIRM= RUNLEVEL=5 PWD=/
SPLASHCFG=/etc/bootsplash/themes/SLES/config/bootsplash-1280x1024.cfg
PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes
ROOTFS_BLKDEV=/dev/disk/by-id/scsi-14d5346542020202030347929c4471f4a992f647d8c930037-part2
_=/sbin/startproc DAEMON=/sbin/auditd ]
done
<notice -- Dec 27 20:11:08.721488000> 'auditd start' exits with status
0
<notice -- Dec 27 20:11:08.723477000>
haveged start
Starting haveged daemon
<notice -- Dec 27 20:11:08.772775000>
startproc: execve (/sbin/haveged) [
/sbin/haveged
-w
1024
-v
1
CONSOLE=/dev/console
SELINUX_INIT=YES
ROOTFS_FSTYPE=ext3
SHELL=/bin/sh
TERM=linux
ROOTFS_FSCK=0
crashkernel=256M-:128M
LC_ALL=POSIX
INIT_VERSION=sysvinit-2.86
REDIRECT=/dev/tty1
COLUMNS=156
PATH=/bin:/sbin:/usr/bin:/usr/sbin
vga=0x31a
DO_CONFIRM=
RUNLEVEL=5
PWD=/
SPLASHCFG=/etc/bootsplash/themes/SLES/config/bootsplash-1280x1024.cfg
PREVLEVEL=N
LINES=60
HOME=/
SHLVL=2
splash=silent
SPLASH=yes
ROOTFS_BLKDEV=/dev/disk/by-id/scsi-14d5346542020202030347929c4471f4a992f647d8c930037-part2
_=/sbin/startproc
DAEMON=/sbin/haveged
done
<notice -- Dec 27 20:11:08.977862000> 'haveged start' exits with status
0
<notice -- Dec 27 20:11:08.979577000> rpcbind start
Starting rpcbind
<notice -- Dec 27 20:11:09.33208000> startproc: execve (/sbin/rpcbind) [
/sbin/rpcbind ], [ CONSOLE=/dev/console SELINUX_INIT=YES
ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0
crashkernel=256M-:128M LC_ALL=POSIX INIT_VERSION=sysvinit-2.86
REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin
vga=0x31a DO_CONFIRM= RUNLEVEL=5 PWD=/
SPLASHCFG=/etc/bootsplash/themes/SLES/config/bootsplash-1280x1024.cfg
PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes
ROOTFS_BLKDEV=/dev/disk/by-id/scsi-14d5346542020202030347929c4471f4a992f647d8c930037-part2
_=/sbin/startproc DAEMON=/sbin/rpcbind ]
done
<notice -- Dec 27 20:11:09.106169000> 'rpcbind start' exits with status
0
<notice -- Dec 27 20:11:09.107657000>
splash_early start
<notice -- Dec 27 20:11:09.150175000>
'splash_early start' exits with status 0
<notice -- Dec 27 20:11:09.152071000> nfs start
Not starting NFS client services - no NFS found in /etc/fstab:unused
<notice -- Dec 27 20:11:09.212532000> 'nfs start' exits with status 6
<notice -- Dec 27 20:11:09.214284000> smbfs start
Mount CIFS File Systems unused
<notice -- Dec 27 20:11:09.270080000> 'smbfs start' exits with status 6
<notice -- Dec 27 20:11:09.272092000> kbd start
Loading console font lat9w-16.psfu -m trivial G0:loadable
doneLoading keymap assuming iso-8859-15 euro
Loading /usr/share/kbd/keymaps/i386/qwerty/us.map.gz
doneLoading compose table latin1.adddone
Start Unicode mode
done
<notice -- Dec 27 20:11:10.78851000> 'kbd start' exits with status 0
<notice -- Dec 27 20:11:10.81452000> alsasound start
<notice -- Dec 27 20:11:10.119462000> 'alsasound start' exits with
status 0
<notice -- Dec 27 20:11:10.120953000> bluez-coldplug start
done
<notice -- Dec 27 20:11:10.159870000> 'bluez-coldplug start' exits with
status 0
<notice -- Dec 27 20:11:10.161649000> irq_balancer start
Starting irqbalance
<notice -- Dec 27 20:11:10.228044000> startproc: execve
(/usr/sbin/irqbalance) [ /usr/sbin/irqbalance ], [ CONSOLE=/dev/console
SELINUX_INIT=YES ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux
ROOTFS_FSCK=0 crashkernel=256M-:128M LC_ALL=POSIX
INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156
PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a DO_CONFIRM= RUNLEVEL=5
PWD=/
SPLASHCFG=/etc/bootsplash/themes/SLES/config/bootsplash-1280x1024.cfg
PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes
ROOTFS_BLKDEV=/dev/disk/by-id/scsi-14d5346542020202030347929c4471f4a992f647d8c930037-part2
_=/sbin/startproc DAEMON=/usr/sbin/irqbalance ]
done
<notice -- Dec 27 20:11:10.240220000> 'irq_balancer start' exits with
status 0
<notice -- Dec 27 20:11:10.241681000> java.binfmt_misc start
Starting java.binfmt_misc done
<notice -- Dec 27 20:11:10.312192000>
'java.binfmt_misc start' exits with status 0
<notice -- Dec 27 20:11:10.314207000> mcelog start
Starting mcelog...
<notice -- Dec 27 20:11:10.378680000> startproc: execve
(/usr/sbin/mcelog) [ /usr/sbin/mcelog --daemon --config-file
/etc/mcelog/mcelog.conf ], [ CONSOLE=/dev/console SELINUX_INIT=YES
ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0
crashkernel=256M-:128M LC_ALL=POSIX INIT_VERSION=sysvinit-2.86
REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin
vga=0x31a DO_CONFIRM= RUNLEVEL=5 PWD=/
SPLASHCFG=/etc/bootsplash/themes/SLES/config/bootsplash-1280x1024.cfg
PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes
ROOTFS_BLKDEV=/dev/disk/by-id/scsi-14d5346542020202030347929c4471f4a992f647d8c930037-part2
_=/sbin/startproc DAEMON=/usr/sbin/mcelog ]
done
<notice -- Dec 27 20:11:10.428551000> 'mcelog start' exits with status
0
<notice -- Dec 27 20:11:10.429934000& -
Hard disk problems after full upgrade [SOLVED]
After a full upgrage (pacman -Suy) last monday, My system denied to boot:D:D:D:D:D.
So to fix it I have to go to /boot/grub/menu.list and change from hda3 to sda3. Everything seems to be Ok but when the system is booting and scan the the hard disk to check bad, It drops me to the shell with the error that there is something wrong with my hard disk and it suggest me to set the superblock to 8139.
So to fix it I boot my PC from Arch live CD, use the following command:
#fsck.ext3 -c -f /dev/sda3
#fsck.ext3 -b 8139
Everything seems to be Ok, there is no bad in my hard disk.
When I boot my system again, I got the same error again, I came back to live CD, check the hard disk, set the superblock as It told me and again, I got the error when I boot from the hard disk.
This is the second PC with the same error.
Three months ago, I upgraded my Server and got exactly the same problem. Because this is the server, I need it run ASAP, so I modified the rc.sysinit script so that the system will not check my hard disk when It boots. :P:P. And my Server can run without any problems since then.
I don't have time much to spend on this error and my PC is in the Lab now so I can't provide the detail of the error until next Monday. Sorry for that.
Any idea how to fix this error?
Cheers.
Last edited by hungsonbk (2008-06-25 10:26:35)tigrmesh wrote:Did you review and merge any .pacnew files after the upgrade?
:D:D I am a kind of lazy guy so when I did pacman -Suy, I just leave it running without reading information on the terminal.
milan wrote:I guess you didn't change entries in /etc/fstab (hda->sda).
Yes, you are right. I changed from hda to sda in /boot/grub/menu.lst but I forgot to do the same in /etc/fstab files. On Monday I will check again if it is set correctly or not
:D:D. I have just taken a quick look into the fstab file in my Server, The One with the same problem three months ago, and the fstab file is set correctly with sda partitions. I don't want to touch this server again or my services will be down. So this seems not the correct solution, but anyway, I will take a look at it next week.
Thanks for your replies. -
Radeon Early KMS Fails with Linux LTS
Upgraded to linux-lts 3.0.72-1 yesterday. Kernel now hangs for 60 seconds during the KMS switch with the following error messages (with both the main initramfs and the fallback):
[ 61.120047] r600_cp: Failed to load firmware "radeon/REDWOOD_pfp.bin"
[ 61.120083] [drm:evergreen_startup] *ERROR* Failed to load firmware!
[ 61.120121] radeon 0000:01:00.0: disabling GPU acceleration
GPU acceleration is then disabled and I cannot activate desktop effects.
Here's the full dmesg:
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.0.71-1-lts (nobody@andyrtr) (gcc version 4.7.2 (GCC) ) #1 SMP Fri Mar 29 11:32:47 CET 2013
[ 0.000000] Command line: root=/dev/system/root cryptdevice=/dev/sda2:root ro apparmor=1 security=apparmor init=/usr/sbin/e4rat-preload-lite initrd=/initramfs-linux-lts.img BOOT_IMAGE=/vmlinuz-linux-lts
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009e800 (usable)
[ 0.000000] BIOS-e820: 000000000009e800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000cfe90000 (usable)
[ 0.000000] BIOS-e820: 00000000cfe90000 - 00000000cfee3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000cfee3000 - 00000000cfef0000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000cfef0000 - 00000000cff00000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000230000000 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.5 present.
[ 0.000000] DMI: Dell Inc. Inspiron 530/0RY007, BIOS 1.0.18 02/24/2009
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x230000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CEFFF write-protect
[ 0.000000] CF000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-through
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 100000000 mask F00000000 write-back
[ 0.000000] 1 base 200000000 mask FE0000000 write-back
[ 0.000000] 2 base 220000000 mask FF0000000 write-back
[ 0.000000] 3 base 000000000 mask F80000000 write-back
[ 0.000000] 4 base 080000000 mask FC0000000 write-back
[ 0.000000] 5 base 0C0000000 mask FF0000000 write-back
[ 0.000000] 6 base 0CFF00000 mask FFFF00000 uncachable
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 00000000cff00000 - 0000000100000000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0xcfe90 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [ffff8800000f3f00] f3f00
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 20480
[ 0.000000] init_memory_mapping: 0000000000000000-00000000cfe90000
[ 0.000000] 0000000000 - 00cfe00000 page 2M
[ 0.000000] 00cfe00000 - 00cfe90000 page 4k
[ 0.000000] kernel direct mapping tables up to 0xcfe8ffff @ [mem 0x1fffa000-0x1fffffff]
[ 0.000000] init_memory_mapping: 0000000100000000-0000000230000000
[ 0.000000] 0100000000 - 0230000000 page 2M
[ 0.000000] kernel direct mapping tables up to 0x22fffffff @ [mem 0xcfe8a000-0xcfe8ffff]
[ 0.000000] RAMDISK: 7fa7d000 - 7ffff000
[ 0.000000] ACPI: RSDP 00000000000f97a0 00024 (v02 DELL )
[ 0.000000] ACPI: XSDT 00000000cfee3080 0005C (v01 DELL FX09 42302E31 AWRD 00000000)
[ 0.000000] ACPI: FACP 00000000cfee7200 000F4 (v03 DELL FX09 42302E31 AWRD 00000000)
[ 0.000000] ACPI: DSDT 00000000cfee3200 03FFC (v01 DELL AWRDACPI 00001000 MSFT 03000000)
[ 0.000000] ACPI: FACS 00000000cfe90000 00040
[ 0.000000] ACPI: HPET 00000000cfee73c0 00038 (v01 DELL FX09 42302E31 AWRD 00000098)
[ 0.000000] ACPI: MCFG 00000000cfee7400 0003C (v01 DELL FX09 42302E31 AWRD 00000000)
[ 0.000000] ACPI: SLIC 00000000cfee7440 00176 (v01 DELL FX09 42302E31 AWRD 00000000)
[ 0.000000] ACPI: DMY2 00000000cfee75c0 00080 (v01 DELL FX09 42302E31 AWRD 00000000)
[ 0.000000] ACPI: APIC 00000000cfee7300 00084 (v01 DELL FX09 42302E31 AWRD 00000000)
[ 0.000000] ACPI: SSDT 00000000cfee7ca0 00380 (v01 PmRef CpuPm 00003000 INTL 20041203)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-0000000230000000
[ 0.000000] Initmem setup node 0 0000000000000000-0000000230000000
[ 0.000000] NODE_DATA [000000022fffb000 - 000000022fffffff]
[ 0.000000] [ffffea0000000000-ffffea0007bfffff] PMD -> [ffff880227600000-ffff88022e7fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00230000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009e
[ 0.000000] 0: 0x00000100 -> 0x000cfe90
[ 0.000000] 0: 0x00100000 -> 0x00230000
[ 0.000000] On node 0 totalpages: 2096670
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 5 pages reserved
[ 0.000000] DMA zone: 3921 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 833224 pages, LIFO batch:31
[ 0.000000] Normal zone: 17024 pages used for memmap
[ 0.000000] Normal zone: 1228160 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 000000000009f000
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000cfe90000 - 00000000cfee3000
[ 0.000000] PM: Registered nosave memory: 00000000cfee3000 - 00000000cfef0000
[ 0.000000] PM: Registered nosave memory: 00000000cfef0000 - 00000000cff00000
[ 0.000000] PM: Registered nosave memory: 00000000cff00000 - 00000000e0000000
[ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
[ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at cff00000 (gap: cff00000:10100000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88022fc00000 s79360 r8192 d23040 u524288
[ 0.000000] pcpu-alloc: s79360 r8192 d23040 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2065305
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: root=/dev/system/root cryptdevice=/dev/sda2:root ro apparmor=1 security=apparmor init=/usr/sbin/e4rat-preload-lite initrd=/initramfs-linux-lts.img BOOT_IMAGE=/vmlinuz-linux-lts
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 8185976k/9175040k available (4280k kernel code, 788360k absent, 200704k reserved, 5168k data, 744k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:2304
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 67108864 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2992.609 MHz processor.
[ 0.000004] Calibrating delay loop (skipped), value calculated using timer frequency.. 5985.21 BogoMIPS (lpj=29926090)
[ 0.000007] pid_max: default: 32768 minimum: 301
[ 0.000095] Security Framework initialized
[ 0.000115] AppArmor: AppArmor initialized
[ 0.010311] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.013697] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.015293] Mount-cache hash table entries: 256
[ 0.015649] Initializing cgroup subsys cpuacct
[ 0.015684] Initializing cgroup subsys memory
[ 0.015706] Initializing cgroup subsys devices
[ 0.015708] Initializing cgroup subsys freezer
[ 0.015710] Initializing cgroup subsys net_cls
[ 0.015712] Initializing cgroup subsys blkio
[ 0.015755] CPU: Physical Processor ID: 0
[ 0.015756] CPU: Processor Core ID: 0
[ 0.015758] mce: CPU supports 6 MCE banks
[ 0.015766] CPU0: Thermal monitoring enabled (TM2)
[ 0.015770] using mwait in idle threads.
[ 0.016853] ACPI: Core revision 20110413
[ 0.020014] ftrace: allocating 16930 entries in 67 pages
[ 0.025685] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.128257] CPU0: Intel(R) Core(TM)2 Duo CPU E8400 @ 3.00GHz stepping 06
[ 0.130000] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
[ 0.130000] ... version: 2
[ 0.130000] ... bit width: 40
[ 0.130000] ... generic registers: 2
[ 0.130000] ... value mask: 000000ffffffffff
[ 0.130000] ... max period: 000000007fffffff
[ 0.130000] ... fixed-purpose events: 3
[ 0.130000] ... event mask: 0000000700000003
[ 0.130000] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.130000] Booting Node 0, Processors #1
[ 0.130000] smpboot cpu 1: start_ip = 99000
[ 0.290024] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.290056] Brought up 2 CPUs
[ 0.290058] Total of 2 processors activated (11970.20 BogoMIPS).
[ 0.291770] devtmpfs: initialized
[ 0.291770] PM: Registering ACPI NVS region at cfe90000 (339968 bytes)
[ 0.291770] Time: 22:30:54 Date: 04/09/13
[ 0.291770] NET: Registered protocol family 16
[ 0.291770] ACPI: bus type pci registered
[ 0.291770] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.291770] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.325013] PCI: Using configuration type 1 for base access
[ 0.325392] bio: create slab <bio-0> at 0
[ 0.325392] ACPI: EC: Look up EC in DSDT
[ 0.325392] ACPI: SSDT 00000000cfee7680 0022A (v01 PmRef Cpu0Ist 00003000 INTL 20041203)
[ 0.325392] ACPI: Dynamic OEM Table Load:
[ 0.325392] ACPI: SSDT (null) 0022A (v01 PmRef Cpu0Ist 00003000 INTL 20041203)
[ 0.325392] ACPI: SSDT 00000000cfee7b40 00152 (v01 PmRef Cpu1Ist 00003000 INTL 20041203)
[ 0.325392] ACPI: Dynamic OEM Table Load:
[ 0.325392] ACPI: SSDT (null) 00152 (v01 PmRef Cpu1Ist 00003000 INTL 20041203)
[ 0.325392] ACPI: Interpreter enabled
[ 0.325392] ACPI: (supports S0 S3 S4 S5)
[ 0.325392] ACPI: Using IOAPIC for interrupt routing
[ 0.331156] ACPI: No dock devices found.
[ 0.331158] HEST: Table not found.
[ 0.331160] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.331199] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.331276] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 0.331278] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 0.331280] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.331282] pci_root PNP0A08:00: host bridge window [mem 0x000c0000-0x000dffff]
[ 0.331283] pci_root PNP0A08:00: host bridge window [mem 0xcff00000-0xfebfffff]
[ 0.331292] pci 0000:00:00.0: [8086:29c0] type 0 class 0x000600
[ 0.331325] pci 0000:00:01.0: [8086:29c1] type 1 class 0x000604
[ 0.331353] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.331355] pci 0000:00:01.0: PME# disabled
[ 0.331386] pci 0000:00:19.0: [8086:10c0] type 0 class 0x000200
[ 0.331400] pci 0000:00:19.0: reg 10: [mem 0xfdfc0000-0xfdfdffff]
[ 0.331407] pci 0000:00:19.0: reg 14: [mem 0xfdfff000-0xfdffffff]
[ 0.331413] pci 0000:00:19.0: reg 18: [io 0xff00-0xff1f]
[ 0.331462] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 0.331466] pci 0000:00:19.0: PME# disabled
[ 0.331480] pci 0000:00:1a.0: [8086:2937] type 0 class 0x000c03
[ 0.331514] pci 0000:00:1a.0: reg 20: [io 0xfe00-0xfe1f]
[ 0.331554] pci 0000:00:1a.1: [8086:2938] type 0 class 0x000c03
[ 0.331588] pci 0000:00:1a.1: reg 20: [io 0xfd00-0xfd1f]
[ 0.331629] pci 0000:00:1a.2: [8086:2939] type 0 class 0x000c03
[ 0.331663] pci 0000:00:1a.2: reg 20: [io 0xfc00-0xfc1f]
[ 0.331707] pci 0000:00:1a.7: [8086:293c] type 0 class 0x000c03
[ 0.331720] pci 0000:00:1a.7: reg 10: [mem 0xfdffe000-0xfdffe3ff]
[ 0.331780] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.331783] pci 0000:00:1a.7: PME# disabled
[ 0.331798] pci 0000:00:1b.0: [8086:293e] type 0 class 0x000403
[ 0.331809] pci 0000:00:1b.0: reg 10: [mem 0xfdff4000-0xfdff7fff 64bit]
[ 0.331862] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.331865] pci 0000:00:1b.0: PME# disabled
[ 0.331881] pci 0000:00:1d.0: [8086:2934] type 0 class 0x000c03
[ 0.331915] pci 0000:00:1d.0: reg 20: [io 0xfb00-0xfb1f]
[ 0.331957] pci 0000:00:1d.1: [8086:2935] type 0 class 0x000c03
[ 0.331991] pci 0000:00:1d.1: reg 20: [io 0xfa00-0xfa1f]
[ 0.332031] pci 0000:00:1d.2: [8086:2936] type 0 class 0x000c03
[ 0.332065] pci 0000:00:1d.2: reg 20: [io 0xf900-0xf91f]
[ 0.332110] pci 0000:00:1d.7: [8086:293a] type 0 class 0x000c03
[ 0.332123] pci 0000:00:1d.7: reg 10: [mem 0xfdffd000-0xfdffd3ff]
[ 0.332183] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.332186] pci 0000:00:1d.7: PME# disabled
[ 0.332198] pci 0000:00:1e.0: [8086:244e] type 1 class 0x000604
[ 0.332247] pci 0000:00:1f.0: [8086:2916] type 0 class 0x000601
[ 0.332315] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0800 (mask 003f)
[ 0.332318] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0290 (mask 003f)
[ 0.332356] pci 0000:00:1f.2: [8086:2920] type 0 class 0x000101
[ 0.332368] pci 0000:00:1f.2: reg 10: [io 0xf800-0xf807]
[ 0.332374] pci 0000:00:1f.2: reg 14: [io 0xf700-0xf703]
[ 0.332380] pci 0000:00:1f.2: reg 18: [io 0xf600-0xf607]
[ 0.332386] pci 0000:00:1f.2: reg 1c: [io 0xf500-0xf503]
[ 0.332392] pci 0000:00:1f.2: reg 20: [io 0xf400-0xf40f]
[ 0.332398] pci 0000:00:1f.2: reg 24: [io 0xf300-0xf30f]
[ 0.332434] pci 0000:00:1f.3: [8086:2930] type 0 class 0x000c05
[ 0.332446] pci 0000:00:1f.3: reg 10: [mem 0xfdffc000-0xfdffc0ff 64bit]
[ 0.332462] pci 0000:00:1f.3: reg 20: [io 0x0500-0x051f]
[ 0.332488] pci 0000:00:1f.5: [8086:2926] type 0 class 0x000101
[ 0.332500] pci 0000:00:1f.5: reg 10: [io 0xf100-0xf107]
[ 0.332506] pci 0000:00:1f.5: reg 14: [io 0xf000-0xf003]
[ 0.332512] pci 0000:00:1f.5: reg 18: [io 0xef00-0xef07]
[ 0.332518] pci 0000:00:1f.5: reg 1c: [io 0xee00-0xee03]
[ 0.332524] pci 0000:00:1f.5: reg 20: [io 0xed00-0xed0f]
[ 0.332531] pci 0000:00:1f.5: reg 24: [io 0xec00-0xec0f]
[ 0.332588] pci 0000:01:00.0: [1002:68d8] type 0 class 0x000300
[ 0.332598] pci 0000:01:00.0: reg 10: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.332606] pci 0000:01:00.0: reg 18: [mem 0xfddc0000-0xfdddffff 64bit]
[ 0.332612] pci 0000:01:00.0: reg 20: [io 0xce00-0xceff]
[ 0.332622] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[ 0.332646] pci 0000:01:00.0: supports D1 D2
[ 0.332661] pci 0000:01:00.1: [1002:aa60] type 0 class 0x000403
[ 0.332671] pci 0000:01:00.1: reg 10: [mem 0xfddfc000-0xfddfffff 64bit]
[ 0.332715] pci 0000:01:00.1: supports D1 D2
[ 0.332739] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.332741] pci 0000:00:01.0: bridge window [io 0xc000-0xcfff]
[ 0.332744] pci 0000:00:01.0: bridge window [mem 0xfdd00000-0xfddfffff]
[ 0.332747] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.332773] pci 0000:02:00.0: [8086:107c] type 0 class 0x000200
[ 0.332790] pci 0000:02:00.0: reg 10: [mem 0xfdce0000-0xfdcfffff]
[ 0.332798] pci 0000:02:00.0: reg 14: [mem 0xfdcc0000-0xfdcdffff]
[ 0.332806] pci 0000:02:00.0: reg 18: [io 0xdf00-0xdf3f]
[ 0.332835] pci 0000:02:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[ 0.332866] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 0.332870] pci 0000:02:00.0: PME# disabled
[ 0.332908] pci 0000:00:1e.0: PCI bridge to [bus 02-02] (subtractive decode)
[ 0.332911] pci 0000:00:1e.0: bridge window [io 0xd000-0xdfff]
[ 0.332914] pci 0000:00:1e.0: bridge window [mem 0xfdc00000-0xfdcfffff]
[ 0.332918] pci 0000:00:1e.0: bridge window [mem 0xfde00000-0xfdefffff 64bit pref]
[ 0.332920] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.332922] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.332924] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.332926] pci 0000:00:1e.0: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
[ 0.332928] pci 0000:00:1e.0: bridge window [mem 0xcff00000-0xfebfffff] (subtractive decode)
[ 0.332936] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.333005] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[ 0.333057] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.333059] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
[ 0.333060] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 0.338616] ACPI: PCI Interrupt Link [LNKA] (IRQs *3 4 5 7 9 10 11 12 14 15)
[ 0.338649] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 *4 5 7 9 10 11 12 14 15)
[ 0.338682] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 *10 11 12 14 15)
[ 0.338714] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12 14 15)
[ 0.338746] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 *10 11 12 14 15)
[ 0.338777] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *5 7 9 10 11 12 14 15)
[ 0.338809] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 7 *9 10 11 12 14 15)
[ 0.338841] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 7 9 10 *11 12 14 15)
[ 0.338905] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.338908] vgaarb: loaded
[ 0.338909] vgaarb: bridge control possible 0000:01:00.0
[ 0.338951] PCI: Using ACPI for IRQ routing
[ 0.343725] PCI: pci_cache_line_size set to 64 bytes
[ 0.343777] reserve RAM buffer: 000000000009e800 - 000000000009ffff
[ 0.343779] reserve RAM buffer: 00000000cfe90000 - 00000000cfffffff
[ 0.343870] NetLabel: Initializing
[ 0.343872] NetLabel: domain hash size = 128
[ 0.343873] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.343883] NetLabel: unlabeled traffic allowed by default
[ 0.343887] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[ 0.343891] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.343894] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 0.350015] Switching to clocksource hpet
[ 0.354598] AppArmor: AppArmor Filesystem Enabled
[ 0.354616] pnp: PnP ACPI init
[ 0.354626] ACPI: bus type pnp registered
[ 0.354686] pnp 00:00: [bus 00-ff]
[ 0.354688] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.354690] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.354691] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.354693] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.354694] pnp 00:00: [mem 0x000c0000-0x000dffff window]
[ 0.354696] pnp 00:00: [mem 0xcff00000-0xfebfffff window]
[ 0.354731] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.354769] pnp 00:01: [io 0x0010-0x001f]
[ 0.354771] pnp 00:01: [io 0x0022-0x003f]
[ 0.354772] pnp 00:01: [io 0x0044-0x005f]
[ 0.354773] pnp 00:01: [io 0x0060]
[ 0.354775] pnp 00:01: [io 0x0064]
[ 0.354776] pnp 00:01: [io 0x0062-0x0063]
[ 0.354777] pnp 00:01: [io 0x0065-0x006f]
[ 0.354778] pnp 00:01: [io 0x0074-0x007f]
[ 0.354780] pnp 00:01: [io 0x0091-0x0093]
[ 0.354781] pnp 00:01: [io 0x00a2-0x00bf]
[ 0.354782] pnp 00:01: [io 0x00e0-0x00ef]
[ 0.354784] pnp 00:01: [io 0x04d0-0x04d1]
[ 0.354785] pnp 00:01: [io 0x0800-0x087f]
[ 0.354786] pnp 00:01: [io 0x0290-0x0297]
[ 0.354788] pnp 00:01: [io 0x0880-0x088f]
[ 0.354831] system 00:01: [io 0x04d0-0x04d1] has been reserved
[ 0.354833] system 00:01: [io 0x0800-0x087f] has been reserved
[ 0.354835] system 00:01: [io 0x0290-0x0297] has been reserved
[ 0.354837] system 00:01: [io 0x0880-0x088f] has been reserved
[ 0.354839] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.354847] pnp 00:02: [dma 4]
[ 0.354848] pnp 00:02: [io 0x0000-0x000f]
[ 0.354850] pnp 00:02: [io 0x0080-0x0090]
[ 0.354851] pnp 00:02: [io 0x0094-0x009f]
[ 0.354852] pnp 00:02: [io 0x00c0-0x00df]
[ 0.354870] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.354904] pnp 00:03: [irq 0 disabled]
[ 0.354911] pnp 00:03: [irq 8]
[ 0.354912] pnp 00:03: [mem 0xfed00000-0xfed003ff]
[ 0.354931] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.354949] pnp 00:04: [io 0x0070-0x0073]
[ 0.354969] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.354975] pnp 00:05: [io 0x0061]
[ 0.354993] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.354999] pnp 00:06: [io 0x00f0-0x00ff]
[ 0.355003] pnp 00:06: [irq 13]
[ 0.355022] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.355123] pnp 00:07: [io 0x03f0-0x03f5]
[ 0.355124] pnp 00:07: [io 0x03f7]
[ 0.355128] pnp 00:07: [irq 6]
[ 0.355130] pnp 00:07: [dma 2]
[ 0.355157] pnp 00:07: Plug and Play ACPI device, IDs PNP0700 (active)
[ 0.355195] pnp 00:08: [io 0x0400-0x04bf]
[ 0.355225] system 00:08: [io 0x0400-0x04bf] has been reserved
[ 0.355227] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.355239] pnp 00:09: [mem 0xffb80000-0xffbfffff]
[ 0.355261] pnp 00:09: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.355378] pnp 00:0a: [mem 0xe0000000-0xefffffff]
[ 0.355414] system 00:0a: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.355417] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.355459] pnp 00:0b: [mem 0x000f0000-0x000fffff]
[ 0.355461] pnp 00:0b: [mem 0xcff00000-0xcfffffff]
[ 0.355462] pnp 00:0b: [mem 0xfed00000-0xfed000ff]
[ 0.355463] pnp 00:0b: [mem 0xcfe90000-0xcfefffff]
[ 0.355465] pnp 00:0b: [mem 0x00000000-0x0009ffff]
[ 0.355466] pnp 00:0b: [mem 0x00100000-0xcfe8ffff]
[ 0.355468] pnp 00:0b: [mem 0xfec00000-0xfec00fff]
[ 0.355469] pnp 00:0b: [mem 0xfed14000-0xfed1dfff]
[ 0.355470] pnp 00:0b: [mem 0xfed20000-0xfed9ffff]
[ 0.355472] pnp 00:0b: [mem 0xfee00000-0xfee00fff]
[ 0.355473] pnp 00:0b: [mem 0xffb00000-0xffb7ffff]
[ 0.355474] pnp 00:0b: [mem 0xfff00000-0xffffffff]
[ 0.355476] pnp 00:0b: [mem 0x000e0000-0x000effff]
[ 0.355518] system 00:0b: [mem 0x000f0000-0x000fffff] could not be reserved
[ 0.355520] system 00:0b: [mem 0xcff00000-0xcfffffff] has been reserved
[ 0.355522] system 00:0b: [mem 0xfed00000-0xfed000ff] has been reserved
[ 0.355524] system 00:0b: [mem 0xcfe90000-0xcfefffff] could not be reserved
[ 0.355526] system 00:0b: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.355528] system 00:0b: [mem 0x00100000-0xcfe8ffff] could not be reserved
[ 0.355530] system 00:0b: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.355532] system 00:0b: [mem 0xfed14000-0xfed1dfff] has been reserved
[ 0.355534] system 00:0b: [mem 0xfed20000-0xfed9ffff] has been reserved
[ 0.355536] system 00:0b: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.355538] system 00:0b: [mem 0xffb00000-0xffb7ffff] has been reserved
[ 0.355540] system 00:0b: [mem 0xfff00000-0xffffffff] has been reserved
[ 0.355541] system 00:0b: [mem 0x000e0000-0x000effff] has been reserved
[ 0.355544] system 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.355550] pnp: PnP ACPI: found 12 devices
[ 0.355551] ACPI: ACPI bus type pnp unregistered
[ 0.359835] Switched to NOHz mode on CPU #0
[ 0.359957] Switched to NOHz mode on CPU #1
[ 0.361243] PCI: max bus depth: 1 pci_try_num: 2
[ 0.361257] pci 0000:01:00.0: BAR 6: assigned [mem 0xfdd00000-0xfdd1ffff pref]
[ 0.361260] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.361262] pci 0000:00:01.0: bridge window [io 0xc000-0xcfff]
[ 0.361264] pci 0000:00:01.0: bridge window [mem 0xfdd00000-0xfddfffff]
[ 0.361267] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.361270] pci 0000:02:00.0: BAR 6: assigned [mem 0xfde00000-0xfde1ffff pref]
[ 0.361272] pci 0000:00:1e.0: PCI bridge to [bus 02-02]
[ 0.361274] pci 0000:00:1e.0: bridge window [io 0xd000-0xdfff]
[ 0.361278] pci 0000:00:1e.0: bridge window [mem 0xfdc00000-0xfdcfffff]
[ 0.361281] pci 0000:00:1e.0: bridge window [mem 0xfde00000-0xfdefffff 64bit pref]
[ 0.361290] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.361294] pci 0000:00:01.0: setting latency timer to 64
[ 0.361298] pci 0000:00:1e.0: setting latency timer to 64
[ 0.361301] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.361303] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.361304] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.361306] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
[ 0.361308] pci_bus 0000:00: resource 8 [mem 0xcff00000-0xfebfffff]
[ 0.361310] pci_bus 0000:01: resource 0 [io 0xc000-0xcfff]
[ 0.361311] pci_bus 0000:01: resource 1 [mem 0xfdd00000-0xfddfffff]
[ 0.361313] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.361315] pci_bus 0000:02: resource 0 [io 0xd000-0xdfff]
[ 0.361316] pci_bus 0000:02: resource 1 [mem 0xfdc00000-0xfdcfffff]
[ 0.361318] pci_bus 0000:02: resource 2 [mem 0xfde00000-0xfdefffff 64bit pref]
[ 0.361320] pci_bus 0000:02: resource 4 [io 0x0000-0x0cf7]
[ 0.361321] pci_bus 0000:02: resource 5 [io 0x0d00-0xffff]
[ 0.361323] pci_bus 0000:02: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.361325] pci_bus 0000:02: resource 7 [mem 0x000c0000-0x000dffff]
[ 0.361326] pci_bus 0000:02: resource 8 [mem 0xcff00000-0xfebfffff]
[ 0.361382] NET: Registered protocol family 2
[ 0.361578] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.362545] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.365489] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.365885] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.365887] TCP reno registered
[ 0.365898] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.365957] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.366361] NET: Registered protocol family 1
[ 0.366389] pci 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.366404] pci 0000:00:1a.0: PCI INT A disabled
[ 0.366416] pci 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 0.366430] pci 0000:00:1a.1: PCI INT B disabled
[ 0.366437] pci 0000:00:1a.2: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 0.366450] pci 0000:00:1a.2: PCI INT D disabled
[ 0.366458] pci 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.366482] pci 0000:00:1a.7: PCI INT C disabled
[ 0.366491] pci 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.366505] pci 0000:00:1d.0: PCI INT A disabled
[ 0.366510] pci 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.366524] pci 0000:00:1d.1: PCI INT B disabled
[ 0.366529] pci 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.366543] pci 0000:00:1d.2: PCI INT C disabled
[ 0.366550] pci 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.366567] pci 0000:00:1d.7: PCI INT A disabled
[ 0.366580] pci 0000:01:00.0: Boot video device
[ 0.366585] PCI: CLS 64 bytes, default 64
[ 0.366632] Unpacking initramfs...
[ 0.454751] Freeing initrd memory: 5640k freed
[ 0.456212] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.456215] Placing 64MB software IO TLB between ffff8800cbe8a000 - ffff8800cfe8a000
[ 0.456217] software IO TLB at phys 0xcbe8a000 - 0xcfe8a000
[ 0.456534] audit: initializing netlink socket (disabled)
[ 0.456546] type=2000 audit(1365546653.450:1): initialized
[ 0.464589] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.466761] VFS: Disk quotas dquot_6.5.2
[ 0.466866] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.467034] msgmni has been set to 15999
[ 0.467211] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.467240] io scheduler noop registered
[ 0.467241] io scheduler deadline registered (default)
[ 0.467278] io scheduler cfq registered
[ 0.467351] pcieport 0000:00:01.0: setting latency timer to 64
[ 0.467374] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[ 0.467469] intel_idle: MWAIT substates: 0x22220
[ 0.467470] intel_idle: does not run on family 6 model 23
[ 0.467475] ERST: Table is not found!
[ 0.467514] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.910220] Linux agpgart interface v0.103
[ 0.910276] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 0.910607] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.910611] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.910655] mousedev: PS/2 mouse device common for all mice
[ 0.910685] rtc_cmos 00:04: RTC can wake from S4
[ 0.910758] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 0.910779] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
[ 0.910786] cpuidle: using governor ladder
[ 0.910788] cpuidle: using governor menu
[ 0.910789] EFI Variables Facility v0.08 2004-May-17
[ 0.910954] TCP cubic registered
[ 0.911069] NET: Registered protocol family 10
[ 0.911546] NET: Registered protocol family 17
[ 0.911549] Registering the dns_resolver key type
[ 0.911619] PM: Hibernation image not present or could not be loaded.
[ 0.911633] registered taskstats version 1
[ 0.912247] Magic number: 9:475:552
[ 0.912270] pci_link PNP0C0F:03: hash matches
[ 0.912305] rtc_cmos 00:04: setting system clock to 2013-04-09 22:30:55 UTC (1365546655)
[ 0.912335] Initializing network drop monitor service
[ 0.913212] Freeing unused kernel memory: 744k freed
[ 0.913401] Write protecting the kernel read-only data: 8192k
[ 0.917371] Freeing unused kernel memory: 1844k freed
[ 0.919244] Freeing unused kernel memory: 656k freed
[ 0.924863] systemd-udevd[35]: starting version 200
[ 0.929217] [drm] Initialized drm 1.1.0 20060810
[ 0.935568] [drm] radeon defaulting to kernel modesetting.
[ 0.935570] [drm] radeon kernel modesetting enabled.
[ 0.935608] radeon 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.935612] radeon 0000:01:00.0: setting latency timer to 64
[ 0.935726] [drm] initializing kernel modesetting (REDWOOD 0x1002:0x68D8 0x174B:0xE151).
[ 0.935758] [drm] register mmio base: 0xFDDC0000
[ 0.935759] [drm] register mmio size: 131072
[ 0.935849] ATOM BIOS: REDWOOD
[ 0.935864] radeon 0000:01:00.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used)
[ 0.935866] radeon 0000:01:00.0: GTT: 512M 0x0000000040000000 - 0x000000005FFFFFFF
[ 0.937094] [drm] Detected VRAM RAM=1024M, BAR=256M
[ 0.937097] [drm] RAM width 128bits DDR
[ 0.937161] [TTM] Zone kernel: Available graphics memory: 4097430 kiB.
[ 0.937162] [TTM] Zone dma32: Available graphics memory: 2097152 kiB.
[ 0.937164] [TTM] Initializing pool allocator.
[ 0.937201] [drm] radeon: 1024M of VRAM memory ready
[ 0.937203] [drm] radeon: 512M of GTT memory ready.
[ 0.937217] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 0.937218] [drm] Driver supports precise vblank timestamp query.
[ 0.937250] radeon 0000:01:00.0: irq 41 for MSI/MSI-X
[ 0.937254] radeon 0000:01:00.0: radeon: using MSI.
[ 0.937281] [drm] radeon: irq initialized.
[ 0.937286] [drm] GART: num cpu pages 131072, num gpu pages 131072
[ 0.937772] [drm] Loading REDWOOD Microcode
[ 1.460015] Refined TSC clocksource calibration: 2992.499 MHz.
[ 1.460020] Switching to clocksource tsc
[ 61.120047] r600_cp: Failed to load firmware "radeon/REDWOOD_pfp.bin"
[ 61.120083] [drm:evergreen_startup] *ERROR* Failed to load firmware!
[ 61.120121] radeon 0000:01:00.0: disabling GPU acceleration
[ 61.121175] radeon 0000:01:00.0: ffff880220c5c000 unpin not necessary
[ 61.121177] radeon 0000:01:00.0: ffff880220c5c000 unpin not necessary
[ 61.121191] failed to evaluate ATIF got AE_BAD_PARAMETER
[ 61.122829] [drm] Radeon Display Connectors
[ 61.122830] [drm] Connector 0:
[ 61.122831] [drm] DisplayPort
[ 61.122832] [drm] HPD4
[ 61.122834] [drm] DDC: 0x6440 0x6440 0x6444 0x6444 0x6448 0x6448 0x644c 0x644c
[ 61.122835] [drm] Encoders:
[ 61.122836] [drm] DFP1: INTERNAL_UNIPHY2
[ 61.122838] [drm] Connector 1:
[ 61.122838] [drm] HDMI-A
[ 61.122839] [drm] HPD5
[ 61.122841] [drm] DDC: 0x6470 0x6470 0x6474 0x6474 0x6478 0x6478 0x647c 0x647c
[ 61.122842] [drm] Encoders:
[ 61.122843] [drm] DFP2: INTERNAL_UNIPHY2
[ 61.122844] [drm] Connector 2:
[ 61.122845] [drm] DVI-I
[ 61.122846] [drm] HPD1
[ 61.122847] [drm] DDC: 0x6450 0x6450 0x6454 0x6454 0x6458 0x6458 0x645c 0x645c
[ 61.122849] [drm] Encoders:
[ 61.122849] [drm] DFP3: INTERNAL_UNIPHY1
[ 61.122851] [drm] CRT1: INTERNAL_KLDSCP_DAC1
[ 62.320028] [drm] Radeon display connector DP-1: No monitor connected or invalid EDID
[ 62.371931] [drm] Radeon display connector HDMI-A-1: Found valid EDID
[ 62.423833] [drm] Radeon display connector DVI-I-1: Found valid EDID
[ 62.423849] [drm] Internal thermal controller with fan control
[ 62.423880] [drm] radeon: power management initialized
[ 62.628633] [drm] fb mappable at 0xD0040000
[ 62.628634] [drm] vram apper at 0xD0000000
[ 62.628635] [drm] size 8294400
[ 62.628636] [drm] fb depth is 24
[ 62.628637] [drm] pitch is 7680
[ 62.628675] fbcon: radeondrmfb (fb0) is primary device
[ 62.924892] Console: switching to colour frame buffer device 240x67
[ 62.928774] fb0: radeondrmfb frame buffer device
[ 62.928775] drm: registered panic notifier
[ 62.928779] [drm] Initialized radeon 2.10.0 20080528 for 0000:01:00.0 on minor 0
[ 62.929721] device-mapper: uevent: version 1.0.3
[ 62.929802] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: [email protected]
[ 62.951388] usbcore: registered new interface driver usbfs
[ 62.951408] usbcore: registered new interface driver hub
[ 62.951860] usbcore: registered new device driver usb
[ 62.952716] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 62.952738] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 62.952760] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 62.952762] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 62.952781] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 62.956678] ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
[ 62.956692] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfdffe000
[ 62.964173] SCSI subsystem initialized
[ 62.966530] FDC 0 is a post-1991 82077
[ 62.966568] libata version 3.00 loaded.
[ 62.980013] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 62.980149] hub 1-0:1.0: USB hub found
[ 62.980153] hub 1-0:1.0: 6 ports detected
[ 62.980221] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 62.980241] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 62.980243] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 62.980251] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 62.984146] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
[ 62.984160] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfdffd000
[ 63.000008] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 63.000119] hub 2-0:1.0: USB hub found
[ 63.000122] hub 2-0:1.0: 6 ports detected
[ 63.000275] ata_piix 0000:00:1f.2: version 2.13
[ 63.000283] ata_piix 0000:00:1f.2: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 63.000286] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 63.000312] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 63.000621] scsi0 : ata_piix
[ 63.000680] scsi1 : ata_piix
[ 63.000997] ata1: SATA max UDMA/133 cmd 0xf800 ctl 0xf700 bmdma 0xf400 irq 19
[ 63.001001] ata2: SATA max UDMA/133 cmd 0xf600 ctl 0xf500 bmdma 0xf408 irq 19
[ 63.001013] ata_piix 0000:00:1f.5: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 63.001016] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[ 63.001039] ata_piix 0000:00:1f.5: setting latency timer to 64
[ 63.001372] scsi2 : ata_piix
[ 63.001546] scsi3 : ata_piix
[ 63.001687] ata3: SATA max UDMA/133 cmd 0xf100 ctl 0xf000 bmdma 0xed00 irq 19
[ 63.001690] ata4: SATA max UDMA/133 cmd 0xef00 ctl 0xee00 bmdma 0xed08 irq 19
[ 63.030264] uhci_hcd: USB Universal Host Controller Interface driver
[ 63.030424] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 63.030430] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 63.030432] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 63.030438] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 63.030465] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000fe00
[ 63.030564] hub 3-0:1.0: USB hub found
[ 63.030567] hub 3-0:1.0: 2 ports detected
[ 63.030617] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 63.030622] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 63.030624] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 63.030631] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 63.030658] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000fd00
[ 63.030993] hub 4-0:1.0: USB hub found
[ 63.030996] hub 4-0:1.0: 2 ports detected
[ 63.031041] uhci_hcd 0000:00:1a.2: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 63.031046] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[ 63.031049] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 63.031054] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[ 63.031073] uhci_hcd 0000:00:1a.2: irq 19, io base 0x0000fc00
[ 63.031176] hub 5-0:1.0: USB hub found
[ 63.031179] hub 5-0:1.0: 2 ports detected
[ 63.031221] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 63.031225] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 63.031228] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 63.031233] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[ 63.031252] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000fb00
[ 63.031335] hub 6-0:1.0: USB hub found
[ 63.031338] hub 6-0:1.0: 2 ports detected
[ 63.031391] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 63.031396] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 63.031399] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 63.031403] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[ 63.031423] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000fa00
[ 63.031507] hub 7-0:1.0: USB hub found
[ 63.031510] hub 7-0:1.0: 2 ports detected
[ 63.031554] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 63.031559] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 63.031561] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 63.031567] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[ 63.031586] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000f900
[ 63.031670] hub 8-0:1.0: USB hub found
[ 63.031673] hub 8-0:1.0: 2 ports detected
[ 63.360617] ata3: SATA link down (SStatus 0 SControl 300)
[ 63.371236] ata4: SATA link down (SStatus 0 SControl 300)
[ 63.480010] usb 1-5: new high speed USB device number 4 using ehci_hcd
[ 63.631903] hub 1-5:1.0: USB hub found
[ 63.632248] hub 1-5:1.0: 4 ports detected
[ 63.750013] usb 1-6: new high speed USB device number 5 using ehci_hcd
[ 63.870059] ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 63.870069] ata1.01: SATA link down (SStatus 0 SControl 300)
[ 63.870191] ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 63.870202] ata2.01: SATA link down (SStatus 0 SControl 300)
[ 63.870210] ata2.01: link offline, clearing class 3 to NONE
[ 63.890185] ata2.00: ATAPI: HL-DT-ST DVDRAM GH22NS50, TN04, max UDMA/100
[ 63.903235] ata1.00: ATA-8: WDC WD1002FAEX-00Z3A0, 05.01D05, max UDMA/133
[ 63.903238] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 63.930119] ata2.00: configured for UDMA/100
[ 63.940457] ata1.00: configured for UDMA/133
[ 63.940539] scsi 0:0:0:0: Direct-Access ATA WDC WD1002FAEX-0 05.0 PQ: 0 ANSI: 5
[ 63.943994] scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GH22NS50 TN04 PQ: 0 ANSI: 5
[ 63.946116] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 63.946150] sd 0:0:0:0: [sda] Write Protect is off
[ 63.946152] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 63.946167] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 63.954097] sda: sda1 sda2 sda3
[ 63.954299] sd 0:0:0:0: [sda] Attached SCSI disk
[ 63.963411] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 63.963414] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 63.963518] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 64.360012] usb 2-5: new high speed USB device number 3 using ehci_hcd
[ 64.565540] Initializing USB Mass Storage driver...
[ 64.565618] scsi4 : usb-storage 2-5:1.0
[ 64.565663] usbcore: registered new interface driver usb-storage
[ 64.565664] USB Mass Storage support registered.
[ 64.840010] usb 4-1: new full speed USB device number 2 using uhci_hcd
[ 65.026702] hub 4-1:1.0: USB hub found
[ 65.027689] hub 4-1:1.0: 3 ports detected
[ 65.310009] usb 4-2: new low speed USB device number 3 using uhci_hcd
[ 65.499874] input: USB Optical Mouse as /devices/pci0000:00/0000:00:1a.1/usb4/4-2/4-2:1.0/input/input0
[ 65.499920] generic-usb 0003:0461:4D15.0001: input,hidraw0: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:1a.1-2/input0
[ 65.499929] usbcore: registered new interface driver usbhid
[ 65.499930] usbhid: USB HID core driver
[ 65.570232] scsi 4:0:0:0: Direct-Access TEAC USB HS-CF Card 4.08 PQ: 0 ANSI: 0
[ 65.577604] scsi 4:0:0:1: Direct-Access TEAC USB HS-xD/SM 4.08 PQ: 0 ANSI: 0
[ 65.589979] scsi 4:0:0:2: Direct-Access TEAC USB HS-MS Card 4.08 PQ: 0 ANSI: 0
[ 65.597478] scsi 4:0:0:3: Direct-Access TEAC USB HS-SD Card 4.08 PQ: 0 ANSI: 0
[ 65.636345] sd 4:0:0:0: [sdb] Attached SCSI removable disk
[ 65.675345] sd 4:0:0:1: [sdc] Attached SCSI removable disk
[ 65.691970] sd 4:0:0:2: [sdd] Attached SCSI removable disk
[ 65.700220] sd 4:0:0:3: [sde] Attached SCSI removable disk
[ 65.760011] usb 7-2: new full speed USB device number 2 using uhci_hcd
[ 66.050378] usb 1-5.1: new high speed USB device number 6 using ehci_hcd
[ 66.161907] hub 1-5.1:1.0: USB hub found
[ 66.162251] hub 1-5.1:1.0: 4 ports detected
[ 66.241689] usb 4-1.1: new full speed USB device number 4 using uhci_hcd
[ 66.390902] input: Dell Dell USB Keyboard as /devices/pci0000:00/0000:00:1a.1/usb4/4-1/4-1.1/4-1.1:1.0/input/input1
[ 66.390933] generic-usb 0003:413C:2010.0002: input,hidraw1: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:00:1a.1-1.1/input0
[ 66.397751] input: Dell Dell USB Keyboard as /devices/pci0000:00/0000:00:1a.1/usb4/4-1/4-1.1/4-1.1:1.1/input/input2
[ 66.397794] generic-usb 0003:413C:2010.0003: input,hidraw2: USB HID v1.10 Device [Dell Dell USB Keyboard] on usb-0000:00:1a.1-1.1/input1
[ 121.430130] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null)
[ 123.970098] systemd[1]: systemd 200 running in system mode. (+PAM -LIBWRAP -AUDIT -SELINUX -IMA -SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ)
[ 123.998806] systemd[1]: Set hostname to <530-Arch>.
[ 124.769151] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[ 124.769197] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 124.769210] systemd[1]: Starting Remote File System Setup.
[ 124.769292] systemd[1]: Reached target Remote File System Setup.
[ 124.769300] systemd[1]: Starting Syslog Socket.
[ 124.769374] systemd[1]: Listening on Syslog Socket.
[ 124.769383] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[ 124.769452] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 124.769460] systemd[1]: Starting Device-mapper event daemon FIFOs.
[ 124.769532] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 124.769539] systemd[1]: Starting Delayed Shutdown Socket.
[ 124.769605] systemd[1]: Listening on Delayed Shutdown Socket.
[ 124.769612] systemd[1]: Starting LVM2 metadata daemon socket.
[ 124.769681] systemd[1]: Listening on LVM2 metadata daemon socket.
[ 124.769688] systemd[1]: Starting Encrypted Volumes.
[ 124.769742] systemd[1]: Reached target Encrypted Volumes.
[ 124.769789] systemd[1]: Starting udev Kernel Socket.
[ 124.769854] systemd[1]: Listening on udev Kernel Socket.
[ 124.769891] systemd[1]: Starting udev Control Socket.
[ 124.769957] systemd[1]: Listening on udev Control Socket.
[ 124.769969] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
[ 124.769999] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 124.770015] systemd[1]: Starting Paths.
[ 124.770067] systemd[1]: Reached target Paths.
[ 124.770090] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[ 124.770232] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 124.770240] systemd[1]: Starting Journal Socket.
[ 124.770320] systemd[1]: Listening on Journal Socket.
[ 124.770334] systemd[1]: Mounting POSIX Message Queue File System...
[ 124.879092] systemd[1]: Started Set Up Additional Binary Formats.
[ 124.879212] systemd[1]: Starting udev Kernel Device Manager...
[ 124.953513] systemd[1]: Starting Load Kernel Modules...
[ 124.990140] systemd-udevd[152]: starting version 200
[ 125.020148] systemd[1]: Starting udev Coldplug all Devices...
[ 125.080119] systemd[1]: Starting Journal Service...
[ 125.130194] systemd[1]: Started Journal Service.
[ 125.154128] systemd[1]: Starting Apply Kernel Variables...
[ 125.172193] vboxdrv: Found 2 processor cores.
[ 125.173262] vboxdrv: fAsync=0 offMin=0x252 offMax=0x1098
[ 125.173309] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[ 125.173311] vboxdrv: Successfully loaded version 4.2.10_OSE (interface 0x001a0004).
[ 125.210168] systemd[1]: Starting Setup Virtual Console...
[ 125.239943] vboxpci: IOMMU not found (not registered)
[ 125.280099] systemd[1]: Mounting Debug File System...
[ 125.360097] systemd[1]: Mounting Huge Pages File System...
[ 125.411749] fuse init (API version 7.16)
[ 125.430064] systemd[1]: Starting Swap.
[ 125.430138] systemd[1]: Reached target Swap.
[ 125.430167] systemd[1]: Started File System Check on Root Device.
[ 125.430178] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 125.490117] systemd[1]: Expecting device dev-sda1.device...
[ 125.490952] systemd[1]: Expecting device dev-system-home.device...
[ 125.492912] systemd[1]: Started udev Kernel Device Manager.
[ 125.493937] systemd[1]: Mounted POSIX Message Queue File System.
[ 125.504233] EXT4-fs (dm-1): re-mounted. Opts: (null)
[ 125.550960] systemd[1]: Started Load Kernel Modules.
[ 125.692260] ACPI: Fan [FAN] (on)
[ 125.692495] thermal LNXTHERM:00: registered as thermal_zone0
[ 125.692497] ACPI: Thermal Zone [THRM] (40 C)
[ 125.694631] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3
[ 125.694637] ACPI: Power Button [PWRB]
[ 125.695144] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[ 125.695147] ACPI: Power Button [PWRF]
[ 125.698756] ACPI: acpi_idle registered with cpuidle
[ 125.711049] systemd[1]: Started Apply Kernel Variables.
[ 125.791030] systemd[1]: Started Setup Virtual Console.
[ 125.792132] systemd[1]: Mounted Debug File System.
[ 125.793196] systemd[1]: Mounted Huge Pages File System.
[ 125.823181] iTCO_vendor_support: vendor-support=0
[ 125.832326] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06
[ 125.832413] iTCO_wdt: Found a ICH9R TCO device (Version=2, TCOBASE=0x0460)
[ 125.832465] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 125.861014] systemd[1]: Started Remount Root and Kernel File Systems.
[ 125.925415] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 18 (level, low) -> IRQ 18
[ 125.931016] systemd[1]: Started udev Coldplug all Devices.
[ 125.931053] systemd[1]: Starting Load Random Seed...
[ 125.972288] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 125.974253] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
[ 125.974255] e1000: Copyright (c) 1999-2006 Intel Corporation.
[ 125.974275] e1000 0000:02:00.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[ 126.010143] systemd[1]: Mounting FUSE Control File System...
[ 126.248928] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[ 126.294564] Linux media interface: v0.10
[ 126.300084] systemd[1]: Mounted Configuration File System.
[ 126.300106] systemd[1]: Starting Local File Systems (Pre).
[ 126.301223] systemd[1]: Reached target Local File Systems (Pre).
[ 126.301236] systemd[1]: Mounting /tmp...
[ 126.377775] Linux video capture interface: v2.00
[ 126.432046] systemd[1]: Mounted FUSE Control File System.
[ 126.462280] e1000 0000:02:00.0: eth0: (PCI:33MHz:32-bit) 00:0e:0c:d0:a9:e7
[ 126.462285] e1000 0000:02:00.0: eth0: Intel(R) PRO/1000 Network Connection
[ 126.500227] systemd-udevd[164]: renamed network interface eth0 to enp2s0
[ 126.501038] systemd[1]: Started Load Random Seed.
[ 126.502216] systemd[1]: Mounted /tmp.
[ 126.506786] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 126.506833] HDA Intel 0000:00:1b.0: irq 41 for MSI/MSI-X
[ 126.506848] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 126.531938] uvcvideo: Found UVC 1.00 device <unnamed> (046d:0809)
[ 126.565629] input: UVC Camera (046d:0809) as /devices/pci0000:00/0000:00:1a.7/usb1/1-6/1-6:1.0/input/input6
[ 126.565690] usbcore: registered new interface driver uvcvideo
[ 126.565692] USB Video Class driver (v1.1.0)
[ 126.590651] systemd[1]: Starting LVM2 metadata daemon...
[ 126.616253] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input7
[ 126.619198] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 126.619298] HDA Intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 126.619341] HDA Intel 0000:01:00.1: irq 42 for MSI/MSI-X
[ 126.619358] HDA Intel 0000:01:00.1: setting latency timer to 64
[ 126.656242] HDMI status: Pin=3 Presence_Detect=0 ELD_Valid=0
[ 126.656451] input: HD-Audio Generic HDMI/DP as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card2/input9
[ 126.752008] systemd[1]: Started LVM2 metadata daemon.
[ 126.852107] systemd[1]: Found device WDC_WD1002FAEX-00Z3A0.
[ 126.852132] systemd[1]: Starting File System Check on /dev/sda1...
[ 126.968131] systemd[1]: Starting Sound Card.
[ 126.969099] systemd[1]: Reached target Sound Card.
[ 127.068309] usbcore: registered new interface driver snd-usb-audio
[ 127.090039] set resolution quirk: cval->res = 384
[ 127.191068] systemd[1]: Started File System Check on /dev/sda1.
[ 127.191108] systemd[1]: Mounting /boot...
[ 127.342463] systemd[1]: Found device /dev/system/home.
[ 127.342487] systemd[1]: Starting File System Check on /dev/system/home...
[ 127.345862] EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem
[ 127.347400] EXT4-fs (sda1): mounted filesystem without journal. Opts: (null)
[ 127.402015] systemd[1]: Mounted /boot.
[ 127.571070] systemd[1]: Started File System Check on /dev/system/home.
[ 127.571107] systemd[1]: Mounting /home...
[ 127.733803] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null)
[ 127.735071] systemd[1]: Mounted /home.
[ 127.735105] systemd[1]: Mounting /home/user/Temp...
[ 127.941264] systemd[1]: Mounted /home/user/Temp.
[ 127.941290] systemd[1]: Starting Local File Systems.
[ 127.942288] systemd[1]: Reached target Local File Systems.
[ 127.942344] systemd[1]: Starting Recreate Volatile Files and Directories...
[ 128.511113] systemd[1]: Started Recreate Volatile Files and Directories.
[ 128.511164] systemd[1]: Starting System Initialization.
[ 128.512200] systemd[1]: Reached target System Initialization.
[ 128.512212] systemd[1]: Starting D-Bus System Message Bus Socket.
[ 128.513265] systemd[1]: Listening on D-Bus System Message Bus Socket.
[ 128.513275] systemd[1]: Starting Sockets.
[ 128.514300] systemd[1]: Reached target Sockets.
[ 128.514311] systemd[1]: Starting Daily Cleanup of Temporary Directories.
[ 128.514326] systemd[1]: Started Daily Cleanup of Temporary Directories.
[ 128.514335] systemd[1]: Starting Timers.
[ 128.515358] systemd[1]: Reached target Timers.
[ 128.515366] systemd[1]: Starting Restore Sound Card State...
[ 128.590137] systemd[1]: Starting Basic System.
[ 128.591286] systemd[1]: Reached target Basic System.
[ 128.591300] systemd[1]: Starting System Logger Daemon...
[ 128.651171] systemd[1]: Started System Logger Daemon.
[ 128.651191] systemd[1]: Starting powersave level for Radeon driver...
[ 128.720168] systemd[1]: Started SSH Key Generation.
[ 128.720202] systemd[1]: Starting OpenSSH Daemon...
[ 128.801180] systemd[1]: Started OpenSSH Daemon.
[ 128.801207] systemd[1]: Starting Periodic Command Scheduler...
[ 128.861133] systemd[1]: Started Periodic Command Scheduler.
[ 128.861157] systemd[1]: Starting Apparmor...
[ 128.921385] systemd[1]: Started Apparmor.
[ 128.921416] systemd[1]: Starting Netcfg multi-profile daemon...
[ 128.980152] systemd[1]: Starting Packet Filtering Framework...
[ 129.040127] systemd[1]: Starting Xbox 360 Controller Driver...
[ 129.042976] ADDRCONF(NETDEV_UP): enp2s0: link is not ready
[ 129.121301] systemd[1]: Started Xbox 360 Controller Driver.
[ 129.121333] systemd[1]: Starting Login Service...
[ 129.150621] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 129.190111] systemd[1]: Starting D-Bus System Message Bus...
[ 129.204645] type=1400 audit(1365546783.767:2): apparmor="STATUS" operation="profile_load" name="/usr/lib/dovecot/managesieve-login" pid=367 comm="apparmor_parser"
[ 129.210909] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 129.271230] systemd[1]: Started D-Bus System Message Bus.
[ 129.291825] e1000: enp2s0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX
[ 129.292656] ADDRCONF(NETDEV_CHANGE): enp2s0: link becomes ready
[ 129.314331] input: Xbox Gamepad (userspace driver) as /devices/virtual/input/input10
[ 129.368509] type=1400 audit(1365546783.927:3): apparmor="STATUS" operation="profile_load" name="/usr/sbin/dnsmasq" pid=367 comm="apparmor_parser"
[ 129.381085] systemd[1]: Started Restore Sound Card State.
[ 129.471059] systemd[1]: Started powersave level for Radeon driver.
[ 129.591095] systemd[1]: Started Netcfg multi-profile daemon.
[ 129.691085] systemd[1]: Started Packet Filtering Framework.
[ 129.691122] systemd[1]: Starting Network.
[ 129.692143] systemd[1]: Reached target Network.
[ 129.692153] systemd[1]: Starting Anonymizing Overlay Network...
[ 129.770137] systemd[1]: Starting Network Time Service...
[ 129.851368] systemd[1]: Mounting /home/user/NetworkShare...
[ 129.886172] type=1400 audit(1365546784.447:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/apache2/mpm-prefork/apache2" pid=367 comm="apparmor_parser"
[ 129.886251] type=1400 audit(1365546784.447:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/apache2/mpm-prefork/apache2//DEFAULT_URI" pid=367 comm="apparmor_parser"
[ 129.886306] type=1400 audit(1365546784.447:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/apache2/mpm-prefork/apache2//HANDLING_UNTRUSTED_INPUT" pid=367 comm="apparmor_parser"
[ 129.886417] type=1400 audit(1365546784.447:7): apparmor="STATUS" operation="profile_load" name="/usr/lib/apache2/mpm-prefork/apache2//phpsysinfo" pid=367 comm="apparmor_parser"
[ 129.991051] FS-Cache: Loaded
[ 130.059005] FS-Cache: Netfs 'cifs' registered for caching
[ 130.380110] e1000: enp2s0 NIC Link is Down
[ 130.449417] type=1400 audit(1365546785.007:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/chromium/chromium" pid=367 comm="apparmor_parser"
[ 130.600105] type=1400 audit(1365546785.167:9): apparmor="STATUS" operation="profile_load" name="/sbin/syslogd" pid=367 comm="apparmor_parser"
[ 130.738201] type=1400 audit(1365546785.297:10): apparmor="STATUS" operation="profile_load" name="/usr/sbin/avahi-daemon" pid=367 comm="apparmor_parser"
[ 130.946524] type=1400 audit(1365546785.507:11): apparmor="STATUS" operation="profile_load" name="/usr/lib/dovecot/pop3-login" pid=367 comm="apparmor_parser"
[ 132.681822] e1000: enp2s0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX
[ 133.770110] e1000: enp2s0 NIC Link is Down
[ 134.715491] audit_printk_skb: 63 callbacks suppressed
[ 134.715494] type=1400 audit(1365546789.277:33): apparmor="STATUS" operation="profile_load" name="/usr/lib/firefox{,-[0-9]*}/firefox{,*[^s][^h]}" pid=367 comm="apparmor_parser"
[ 134.833922] type=1400 audit(1365546789.397:34): apparmor="STATUS" operation="profile_load" name="/usr/sbin/identd" pid=367 comm="apparmor_parser"
[ 136.131828] e1000: enp2s0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX
[ 137.230119] e1000: enp2s0 NIC Link is Down
[ 138.190024] CIFS VFS: Error connecting to socket. Aborting operation
[ 138.240053] CIFS VFS: cifs_mount failed w/return code = -115
[ 139.531821] e1000: enp2s0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX
[ 139.950006] enp2s0: no IPv6 routers present
[ 146.452046] EXT4-fs (dm-1): re-mounted. Opts: commit=0
[ 146.834045] EXT4-fs (dm-2): re-mounted. Opts: commit=0
./usr/lib/firmware/radeon/REDWOOD_pfp.bin is present within the initramfs file, so I'm not quite sure why it cannot find it (lsinitcpio /boot/initramfs-linux-lts.img):
./VERSION
./buildconfig
./config
./shutdown
./hooks
./hooks/shutdown
./hooks/lvm2
./hooks/encrypt
./hooks/udev
./init
./init_functions
./lib64
./sbin
./bin
./lib
./usr
./usr/lib64
./usr/sbin
./usr/bin
./usr/bin/findmnt
./usr/bin/lsblk
./usr/bin/cp
./usr/bin/fsck
./usr/bin/fsck.ext3
./usr/bin/fsck.ext2
./usr/bin/fsck.ext4
./usr/bin/dmsetup
./usr/bin/lvmetad
./usr/bin/lvm
./usr/bin/cryptsetup
./usr/bin/udevadm
./usr/bin/udevd
./usr/bin/switch_root
./usr/bin/mount
./usr/bin/blkid
./usr/bin/modinfo
./usr/bin/modprobe
./usr/bin/lsmod
./usr/bin/rmmod
./usr/bin/insmod
./usr/bin/depmod
./usr/bin/kmod
./usr/bin/yes
./usr/bin/wget
./usr/bin/wc
./usr/bin/vi
./usr/bin/uptime
./usr/bin/uniq
./usr/bin/uname
./usr/bin/umount
./usr/bin/true
./usr/bin/touch
./usr/bin/tftp
./usr/bin/test
./usr/bin/telnet
./usr/bin/tail
./usr/bin/tac
./usr/bin/strings
./usr/bin/stat
./usr/bin/sort
./usr/bin/sleep
./usr/bin/sha512sum
./usr/bin/sha256sum
./usr/bin/sha1sum
./usr/bin/sh
./usr/bin/setfont
./usr/bin/seq
./usr/bin/sed
./usr/bin/route
./usr/bin/rmdir
./usr/bin/rm
./usr/bin/reboot
./usr/bin/readlink
./usr/bin/pwd
./usr/bin/ps
./usr/bin/printf
./usr/bin/poweroff
./usr/bin/ping6
./usr/bin/ping
./usr/bin/pidof
./usr/bin/pgrep
./usr/bin/openvt
./usr/bin/nslookup
./usr/bin/netstat
./usr/bin/nc
./usr/bin/mv
./usr/bin/mktemp
./usr/bin/mknod
./usr/bin/mkfifo
./usr/bin/mkdir
./usr/bin/md5sum
./usr/bin/ls
./usr/bin/losetup
./usr/bin/loadkmap
./usr/bin/loadfont
./usr/bin/ln
./usr/bin/less
./usr/bin/killall
./usr/bin/kill
./usr/bin/kbd_mode
./usr/bin/iptunnel
./usr/bin/iprule
./usr/bin/iproute
./usr/bin/iplink
./usr/bin/ipaddr
./usr/bin/ip
./usr/bin/install
./usr/bin/init
./usr/bin/ifconfig
./usr/bin/hexdump
./usr/bin/head
./usr/bin/halt
./usr/bin/grep
./usr/bin/getopt
./usr/bin/free
./usr/bin/false
./usr/bin/expr
./usr/bin/env
./usr/bin/egrep
./usr/bin/echo
./usr/bin/du
./usr/bin/dmesg
./usr/bin/dirname
./usr/bin/df
./usr/bin/dd
./usr/bin/cut
./usr/bin/cttyhack
./usr/bin/clear
./usr/bin/chroot
./usr/bin/chown
./usr/bin/chmod
./usr/bin/chgrp
./usr/bin/cat
./usr/bin/basename
./usr/bin/awk
./usr/bin/ash
./usr/bin/[[
./usr/bin/[
./usr/bin/busybox
./usr/lib
./usr/lib/firmware
./usr/lib/firmware/radeon
./usr/lib/firmware/radeon/BARTS_pfp.bin
./usr/lib/firmware/radeon/BARTS_me.bin
./usr/lib/firmware/radeon/BARTS_mc.bin
./usr/lib/firmware/radeon/BTC_rlc.bin
./usr/lib/firmware/radeon/TURKS_pfp.bin
./usr/lib/firmware/radeon/TURKS_me.bin
./usr/lib/firmware/radeon/TURKS_mc.bin
./usr/lib/firmware/radeon/CAICOS_pfp.bin
./usr/lib/firmware/radeon/CAICOS_me.bin
./usr/lib/firmware/radeon/CAICOS_mc.bin
./usr/lib/firmware/radeon/CAYMAN_pfp.bin
./usr/lib/firmware/radeon/CAYMAN_me.bin
./usr/lib/firmware/radeon/CAYMAN_mc.bin
./usr/lib/firmware/radeon/CAYMAN_rlc.bin
./usr/lib/firmware/radeon/R600_pfp.bin
./usr/lib/firmware/radeon/R600_me.bin
./usr/lib/firmware/radeon/RV610_pfp.bin
./usr/lib/firmware/radeon/RV610_me.bin
./usr/lib/firmware/radeon/RV630_pfp.bin
./usr/lib/firmware/radeon/RV630_me.bin
./usr/lib/firmware/radeon/RV620_pfp.bin
./usr/lib/firmware/radeon/RV620_me.bin
./usr/lib/firmware/radeon/RV635_pfp.bin
./usr/lib/firmware/radeon/RV635_me.bin
./usr/lib/firmware/radeon/RV670_pfp.bin
./usr/lib/firmware/radeon/RV670_me.bin
./usr/lib/firmware/radeon/RS780_pfp.bin
./usr/lib/firmware/radeon/RS780_me.bin
./usr/lib/firmware/radeon/RV770_pfp.bin
./usr/lib/firmware/radeon/RV770_me.bin
./usr/lib/firmware/radeon/RV730_pfp.bin
./usr/lib/firmware/radeon/RV730_me.bin
./usr/lib/firmware/radeon/RV710_pfp.bin
./usr/lib/firmware/radeon/RV710_me.bin
./usr/lib/firmware/radeon/R600_rlc.bin
./usr/lib/firmware/radeon/R700_rlc.bin
./usr/lib/firmware/radeon/CEDAR_pfp.bin
./usr/lib/firmware/radeon/CEDAR_me.bin
./usr/lib/firmware/radeon/CEDAR_rlc.bin
./usr/lib/firmware/radeon/REDWOOD_pfp.bin
./usr/lib/firmware/radeon/REDWOOD_me.bin
./usr/lib/firmware/radeon/REDWOOD_rlc.bin
./usr/lib/firmware/radeon/JUNIPER_pfp.bin
./usr/lib/firmware/radeon/JUNIPER_me.bin
./usr/lib/firmware/radeon/JUNIPER_rlc.bin
./usr/lib/firmware/radeon/CYPRESS_pfp.bin
./usr/This occurs with the 3.4 kernel as well, so whatever incompatibility was introduced was fixed in 3.5 or 3.6. I'm using 3.7.10 right now (since everything else seems to be broken in some way), and not experiencing this.
-
Error Checking File System that doesn't exist anymore [Solved]
I had been dual booting Arch and Ubuntu on my desktop and recently decided to ditch ubuntu and experiment with slackware. I also decided to take advantage of the reinstall to clean up my partition scheme.
The old:
sda1 ntfs windows
sda2 fat32 shared data
sdba5 swap
sdb1 ext3 Arch's root
sdb2 ext3 Arch's home
sdb3 reiser Ubuntu home
sdb4 logical partition
sdb5 reiser Ubuntu's home
sdb6 ext3 used to be shared /boot, but only Ubuntu had been using it since last Arch reinstall
The new
no changes to sda or Arch's partions
sdb3 ext3 Slackware root
sd4 ext3 Slackware home
Slackware is working fine, but when I try to boot up Arch I can only get to where it checks the filesystem, sdb1 and sdb2 check clean, then it tries to check sdb5 and obviously isn't finding this to be clean. When it drops me to the terminal I my old partitions and sdb4 are clean. sdb3 gives me an error saying it can find the reiser journal (don't have the exact wording but it obviously thought this should be a reiserFS not ext3) but if I do fsck.ext3 instead of just fsck it says it's clean.
It's probably relevant that my last few boots before the slackware install were complaing that my ubuntu partitions weren't clean, which kind of confused me since I didn't even mount those in Arch but I didn't bother fixing it since I was planning on reformatting them when I installed slackware and I could still boot into Arch unlike now. I'm wondering if Arch is still complaining about them not being clean from before I reformatted.
Can someone help me convince Arch to let me boot again?
Last edited by mcmillan (2007-08-07 16:23:54)Have you changed fstab on Arch's root partition?
Use some LiveCD (even Arch's installation CD will do) to do so. -
MCS 7825-H3 Experiencing EXT Error
We're receiving the following error on boot - fsck.ext3: invalid argument while checking ext3 journal for /common.
This document suggest that we run the Unified Communications Recover CD in order to restore access - http://www.cisco.com/image/gif/paws/111822/boot-error-00.pdf
Can someone send me a link to download the .iso?Hi,
You can download it from cisco.com from the following path.
Downloads Home >Products >Unified Communications >Call Control >Cisco Unified Communications Manager (CallManager)
Select your cucm version and click on 'Recovery Software .
For example, for version 9.1 , here is the link
http://software.cisco.com/download/release.html?mdfid=284510097&flowid=45900&softwareid=282074294&release=9.1%282%29&relind=AVAILABLE&rellifecycle=&reltype=latest
For 8.6
http://software.cisco.com/download/release.html?mdfid=283782839&flowid=45898&softwareid=282074294&release=8.6%282a%29&relind=AVAILABLE&rellifecycle=&reltype=latest
HTH
Manish -
hi all,
I am running a CentOS base VM on top of Hyper-V server. I upgraded PV drivers of Hyper-V in linux kernel 2.6.32 in order to support
Windows Server 2012, then i am hitting below issue on Windows Server 2008 when kernel switches from old PV(which is 2.6.32 based) to new PV(which is equivalent to linux integration component 3.4).i
am hitting following filesystem check error messages :
Setting hostname hostname:
Checking root filesystem
fsck.ext3/dev/hda2:
The superblock could not be read or does not describe correct ext2 filesystem. If the device is valid and it really contains an ext2
filesystem(and not swap or ufs or something else),then the superblock is corrupt, and you might try running e2fsck with an alternate superblock:
e2fsck -b 8193 <device>
: No such file or directory while trying to open /dev/hda2
*** An error occurred during the filesystem check.
*** Dropping you to a shell; the system will reboot
*** When you leave the shell.
Also, when I go to the repair filesystem mode. I found out the strange behaviour when i ran those command :
(Repair filesytem) 1 # mount
/dev/hda2 on / type ext3 (rw)
proc on /proc type proc (rw)
(Repair filesystem) 1# cat /etc/mtab
/dev/hda2 /ext3 rw 0 0
proc /proc proc rw 0 0
(Repair filesystem) 1# df
Filesystem 1K-blocks used Available Use% Mountedon
/dev/hda2 4%
I think for all above command there should be /dev/sda2 instead of /dev/hda2.
Also my fstab , and fdisk -l looks like ok for me.
(Repair filesystem) 1# cat /etc/fstab
LABEL=/ / ext3 defaults 1 1
LABEL=/boot /boot ext3 defaults 1 2
devpts /dev/pts devpts gid=5,mode=620 0 0
tmpfs /dev/shm tmpfs defaults 0 0
proc /proc proc defaults 0 0
sysfs /sys sysfs defaults 0 0
LABEL=swap-xvda3 swap swap defults 0 0
(Repair filesystem) 1# fdisk -l
Device Boot Start End Block Id System
/dev/sda1 * 1 49 98535 83 Linux
Partition 1 does not end with cylinder boundary.
/dev/sda2 49 19197 39062500 83 Linux
Partition 2 does not end with cylinder boundary.
/dev/sda3 ......
Partition 3 does not ......
/dev/sda4 ......
Partition 4 does not end ....
(Repair filesystem) 1# e2label /dev/sda1
/boot
(Repair filesystem) 1# e2label /dev/sda2
(Repair fielsystem) 1# ls /dev/sd*
/dev/sda /dev/sda1 /dev/sda2 /dev/sda3 /dev/sda4
(Repair filesyatem) 1# ls /dev/hd*
ls: /dev/hd*: No such file or directory
Kindly suggest any configuration of windows server or kernel configs missing or how to resolve this issues
Many many thanks for your reply.
thanks & Regards,
Ujjwali am not able to understand duplicate UUID and from where it is picking /dev/hda* ?
~
VVM:>>
VVM:>> Output of dmesg | grep ata contain substring "Hyper-V" ?
VVM:>>
it doesn't contain "Hyper-V" or ata related message and the output doesn't change with boot parameter reserve=0x1f0, 0x8
~~
~~~~
==
output of dmesg related "ata" Ubuntu v13.04 mini.iso ( with boot parameter reserve=0x1f0, 0x8)
==
see later ( in "good situation" example )
~~
===
Disable legacy ATA driver by adding the following to kernel command line in /boot/grub/menu.lst:
reserve=0x1f0, 0x8
. (This option reserves this I/O region and prevents ata_piix from loading).
==
See output of dmesg related "ata" Ubuntu v13.04 mini.iso ( with boot parameter reserve=0x1f0, 0x8) :
~~
[ 0.176027]
libata version 3.00 loaded.
[ 0.713319]
ata_piix 0000:00:07.1: version 2.13
[ 0.713397]
ata_piix 0000:00:07.1: device not available (can't reserve [io 0x0000-0x0007])
[ 0.713404]
ata_piix: probe of 0000:00:07.1 failed with error -22
[ 0.713474]
pata_acpi 0000:00:07.1: device not available (can't reserve [io 0x0000-0x0007])
[ 0.713479]
pata_acpi: probe of 0000:00:07.1 failed with error -22
~~
As result: 1) IDE disk handled by hv_storvsc , but 2) no CD-ROM device
==
~ # blkid
/dev/sda1: LABEL="ARCH_BOOT" UUID="009c2043-4bl7-4f95-al4d-fb8951f95b5d" TYPE="ext2"
==
~~
VVM>>
VVM>>Q1: Output of blkid contain duplicate UUID ?
VVM>>
-> blkid contains duplicate UUID, below are the output.
~~
This situation is classic problem "
use hv_storvsc instead of ata_piix to handle the IDE disks devices ( but not for the DVD-ROM / CD-ROM device handling)
~~
For compare, see example "good situation":
See output of dmesg related "ata" Ubuntu v13.04 mini.iso ( without boot parameter reserve=0x1f0, 0x8) :
~~~~
~ # dmesg |grep ata
[ 0.167224] libata version 3.00 loaded.
[ 0.703109] ata_piix 0000:00:07.1: version 2.13
[ 0.703267] ata_piix 0000:00:07.1: Hyper-V Virtual Machine detected, ATA device ignore set
[ 0.703339] ata_piix 0000:00:07.1: setting latency timer to 64
[ 0.704968] scsi0 : ata_piix
[ 0.705713] scsi1 : ata_piix
[ 0.706191] atal: PATA max UDMA/33 cmd 0xlf0 ctl 0x3f6 bmdma 0xffa0 irq 14
[ 0.706194] ata2: PATA max UDMA/33 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
[ 0.868844] atal.00: host indicates ignore ATA devices, ignored
[ 0.869142] ata2.00: ATAPI: Virtual CD, , max MWDMA2
[ 0.871736] ata2.00: configured for MWDMA2
~~~~
===
~ # uname -a
Linux ubuntu 3.7.0-7-generic #15-Ubuntu SUP Sat Dec 15 14:13:08 UTC 2012 x86_64 GNU/Linux
~ # lsmod
hv_netvsc 22769 0
hv_storvsc 17496 3
hv_utils 13569 0
hv_vmbus 34432 3 hv_netvsc,hv_storvsc,hv_utils
~ # blkid
/dev/sr0: LABEL=”CDROM" TYPE="iso9660”
/dev/sda1: LABEL="ARCH_BOOT" UUID="009c2043-4bl7-4f95-al4d-fb8951f95b5d" TYPE="ext2"
===
( only CD-ROM and 1( one) IDE disk connected to ATA)
~~
regarding ata_piix.c patch . . .
As far as i understand this patch , it ignore ATA devices on Hyper-V when PV drivers(CONFIG_HYPERV_STORAGE=y) are enabled.
~~
Yes:
ignore ATA-HDD ( but not ignore ATA CD-ROM ) on Hyper-V when PV drivers(CONFIG_HYPERV_STORAGE=y) are enabled.
~
this patches need be backported:
cd006086fa5d ata_piix: defer disks to the Hyper-V drivers by default
and its prerequisite
db63a4c8115a libata: add a host flag to ignore detected ATA devices
~
~~
P.S.
Are You do this:
==
As temporary solution, increase on 1-2 Gb size all .vhd connected to IDE bus
( but not increase size of partitions inside disks)
==
? fsck write message a-la: "no error in file system" ?
2013-01-24 Answer by Ujjwal Kumar: As a temporary solution looks ok for me, but [ VVM: need true solution ]
P.P.S.
To Ujjwal Kumar :
My e-mail:
ZZZZZZZZZZZZZZZ
please send e-mail to me, in reply I send to You patches to ata_piix ( and *.c before and after patches) , etc.
} on 2013-01-14 -- DoNe -
I have a AIR-WLC526-K9, but ive been wondering if the software is correct, because the normal cisco commands wont work.
and there's no webserver page to the device
The BootUp Process:
GNU bash, version 3.2.25(1)-release (i686-redhat-linux-gnu)
These shell commands are defined internally. Type `help' to see this list.
Type `help name' to find out more about the function `name'.
Use `info bash' to find out more about the shell in general.
Use `man -k' or `info' to find out more about commands not in this list.
bash-3.2#
CISCO SYSTEMS
Embedded BIOS Version 1.0(12)6 08/21/06 17:26:53.43
Low Memory: 632 KB
High Memory: 251 MB
PCI Device Table.
Bus Dev Func VendID DevID Class Irq
00 01 00 1022 2080 Host Bridge
00 01 02 1022 2082 Chipset En/Decrypt 11
00 0C 00 1148 4320 Ethernet 11
00 0D 00 177D 0003 Network En/Decrypt 10
00 0F 00 1022 2090 ISA Bridge
00 0F 02 1022 2092 IDE Controller
00 0F 03 1022 2093 Audio 10
00 0F 04 1022 2094 Serial Bus 9
00 0F 05 1022 2095 Serial Bus 9
Evaluating BIOS Options ...
Launch BIOS Extension to setup ROMMON
Cisco Systems ROMMON Version (1.0(12)7) #2: Fri Oct 13 10:52:36 MDT 2006
Platform AIR-WLC526-K9
Launching BootLoader...
Model 3500 S/N:
Booting Primary Image...
Press <ESC> now for additional boot options...
Boot Options
Please choose an option from below:
1. Run primary image (Version ) (active)
2. Run backup image (Version )
3. Manually upgrade primary image
4. Change active boot image
5. Clear Configuration
Please enter your choice: 5
2. ive even pulled the battery on the inside, left power, and the only 'extra' bootup process is this:
CISCO SYSTEMS
Embedded BIOS Version 1.0(12)6 08/21/06 17:26:53.43
Low Memory: 632 KB
High Memory: 251 MB
PCI Device Table.
Bus Dev Func VendID DevID Class Irq
00 01 00 1022 2080 Host Bridge
00 01 02 1022 2082 Chipset En/Decrypt 11
00 0C 00 1148 4320 Ethernet 11
00 0D 00 177D 0003 Network En/Decrypt 10
00 0F 00 1022 2090 ISA Bridge
00 0F 02 1022 2092 IDE Controller
00 0F 03 1022 2093 Audio 10
00 0F 04 1022 2094 Serial Bus 9
00 0F 05 1022 2095 Serial Bus 9
Evaluating BIOS Options ...
Launch BIOS Extension to setup ROMMON
Cisco Systems ROMMON Version (1.0(12)7) #2: Fri Oct 13 10:52:36 MDT 2006
Platform AIR-WLC526-K9
Launching BootLoader...
Model 3500 S/N:
Booting Primary Image...
Press <ESC> now for additional boot options...
Detecting hardware . . . .
Linux version 2.6.18-128.7.1.el5.arrows ([email protected]) (gcc version 4.1.2 20080704 (Red Hat 4.1.2-44)) #2 Sat Sep 19 23:24:38 PDT 2009
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009e000 (usable)
BIOS-e820: 000000000009e000 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000000fbe9000 (usable)
BIOS-e820: 000000000fbe9000 - 0000000010000000 (reserved)
BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
user-defined physical RAM map:
user: 0000000000000000 - 000000000009e000 (usable)
user: 000000000009e000 - 00000000000a0000 (reserved)
user: 00000000000dc000 - 0000000000100000 (reserved)
user: 0000000000100000 - 000000000fbe9000 (usable)
251MB LOWMEM available.
Memory for crash kernel (0x0 to 0x0) notwithin permissible range
disabling kdump
Using x86 segment limits to approximate NX protection
DMI not present or invalid.
Allocating PCI resources starting at 10000000 (gap: 0fbe9000:f0417000)
Detected 498.079 MHz processor.
Built 1 zonelists. Total pages: 64489
Kernel command line: ro root=/dev/hda2 hda=flash printk=yes console=ttyS0,9600 mac=0:0:0:0:0:0 boot-ver=4.0.191.0 mem=257956K
ide_setup: hda=flash -- BAD OPTION
No local APIC present or hardware disabled
Initializing CPU#0
PID hash table entries: 1024 (order: 10, 4096 bytes)
Console: colour *CGA 15x25
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Memory: 249992k/257956k available (2039k kernel code, 7424k reserved, 623k data, 160k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 997.20 BogoMIPS (lpj=1994405)
Security Framework v1.0.0 initialized
Capability LSM initialized
Mount-cache hash table entries: 512
CPU: L1 I Cache: 64K (32 bytes/line), D cache 64K (32 bytes/line)
CPU: L2 Cache: 128K (32 bytes/line)
CPU: AMD Geode(TM) Integrated Processor by AMD PCS stepping 02
Checking 'hlt' instruction... OK.
checking if image is initramfs... it is
Freeing initrd memory: 2137k freed
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xff699, last bus=0
PCI: Using configuration type 1
Setting up standard PCI resources
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Probing PCI hardware
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
NET: Registered protocol family 2
IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
TCP established hash table entries: 8192 (order: 3, 32768 bytes)
TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
TCP: Hash tables configured (established 8192 bind 4096)
TCP reno registered
audit: initializing netlink socket (disabled)
type=2000 audit(1156118776.948:1): initialized
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Initializing Cryptographic API
alg: No test for stdrng (krng)
ksign: Installing public key data
Loading keyring
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered (default)
io scheduler cfq registered
Non-volatile memory driver v1.2
Serial: 8250/16550 driver $Revision: 1.90 $ 2 ports, IRQ sharing disabled
€serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
cs5536_gpio: +++++++++++++ cs5536_init_device enter
cs5536_gpio_baseaddr e800
Trying to free already-free IRQ 1
skge 1.6 addr 0xe0004000 irq 11 chip Yukon rev 1
skge eth0: addr 00:0b:bf:da:90:09
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
CS5535: IDE controller at PCI slot 0000:00:0f.2
CS5535: chipset revision 1
CS5535: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xd400-0xd407, BIOS settings: hda:pio, hdb:pio
hda: STI Flash 7.2.0, CFA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: max request size: 128KiB
hda: 2001888 sectors (1024 MB), CHS=1986/16/63
hda: cache flushes not supported
hda: hda1 hda2
i8042.c: No controller found.
mice: PS/2 mouse device common for all mice
i2c /dev entries driver
lx_acb: AMD SCx200 ACCESS.bus Driver
lx_acb: CS5535:60416:0
arrows-imb: arrows_detect: i2c device addr 32, kind -1
TCP cubic registered
Initializing IPsec netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
Using IPI Shortcut mode
Freeing unused kernel memory: 160k freed
Time: tsc clocksource has been installed.
Red Hat nash version 5.1.19.6 starting
Mounting proc filesystem
Mounting sysfs filesystem
Creating /dev
Creating initial device nodes
Setting up hotplug.
Creating block device nodes.
Loading ehci-hcdehci_hcd 0000:00:0f.5: EHCI Host Controller
.ko module
ehci_hcd 0000:00:0f.5: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:0f.5: irq 9, io mem 0xe0009000
ehci_hcd 0000:00:0f.5: USB 0.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
Loading ohci-hcdohci_hcd 0000:00:0f.4: OHCI Host Controller
.ko module
ohci_hcd 0000:00:0f.4: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:0f.4: irq 9, io mem 0xe0008000
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 4 ports detected
Scanning and configuring dmraid supported devices
Creating root device.
Mounting root filesystem.
EXT3-fs: INFO: recovery required on readonly filesystem.
EXT3-fs: write access will be enabled during recovery.
kjournald starting. Commit interval 5 seconds
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
Setting up other filesystems.
Setting up new root fs
no fstab.sys, mounting internal defaults
Switching to new root and running init.
unmounting old /dev
unmounting old /proc
unmounting old /sys
INIT: version 2.86 booting
Welcome to CentOS release 5.3 (Final)
Press 'I' to enter interactive startup.
Setting clock (utc): Sun Aug 20 17:07:09 PDT 2006 [ OK ]
Starting udev: [ OK ]
Loading default keymap (us): [ OK ]
Setting hostname arrows.localdomain: [ OK ]
raidautorun: failed to open /dev/md0: No such device or address
DM multipath kernel driver not loaded
No devices found
Setting up Logical Volume Management: [ OK ]
Checking filesystems
Checking all file systems.
[/sbin/fsck.ext3 (1) -- /] fsck.ext3 -a -f /dev/hda2
system: 25300/123136 files (0.2% non-contiguous), 144607/245952 blocks
[ OK ]
Remounting root filesystem in read-write mode: [ OK ]
Mounting local filesystems: [ OK ]
Managing tmpfs mount points...
/var/log /
/var/lock /
/var/run /
tar: avahi-daemon: time stamp 2009-09-08 15:48:01 is 96331235 s in the future
tar: console: time stamp 2009-08-30 00:28:19 is 95498453 s in the future
tar: cups/certs: time stamp 2009-09-08 15:48:02 is 96331236 s in the future
tar: cups: time stamp 2009-09-08 15:48:02 is 96331236 s in the future
tar: dbus: time stamp 2009-09-19 14:30:0 INIT: Entering runlevel: 3
Entering non-interactive startup
Checking for hardware changes [ OK ]
Starting multipathd: Starting multipathd daemon: [ OK ]
[ OK ]
Applying ip6tables firewall rules: modprobe: FATAL: Module ip6_tables not found.
ip6tables-restore v1.3.5: ip6tables-restore: unable to initializetable 'filter'
Error occurred at line: 3
Try `ip6tables-restore -h' or 'ip6tables-restore --help' for more information.
[FAILED]
Applying iptables firewall rules: [ OK ]
Loading additional iptables modules: ip_conntrack_netbios_ns ip_conntrack_ftp [FAILED]
Bringing up loopback interface: [ OK ]
Resetting Arrows Switch...
Bringing up interface eth0: [ OK ]
Starting network plug daemon: /etc/netplug.d/netplug eth0 probe -> pid 1074
/etc/netplug.d/netplug eth1 probe -> pid 1075
/etc/netplug.d/netplug eth2 probe -> pid 1078
/etc/netplug.d/netplug eth3 probe -> pid 1081
/etc/netplug.d/netplug eth4 probe -> pid 1084
/etc/netplug.d/netplug eth5 probe -> pid 1087
/etc/netplug.d/netplug eth6 probe -> pid 1090
/etc/netplug.d/netplug eth7 probe -> pid 1093
/etc/netplug.d/netplug eth8 probe -> pid 1096
/etc/netplug.d/netplug eth9 probe -> pid 1099
/etc/netplug.d/netplug eth10 probe -> pid 1102
/etc/netplug.d/netplug eth11 probe -> pid 1105
/etc/netplug.d/netplug eth12 probe -> pid 1108
/etc/netplug.d/netplug eth13 probe -> pid 1111
/etc/netplug.d/netplug eth14 probe -> pid 1114
/etc/netplug.d/netplug eth15 probe -> pid 1117
[ OK ]
Starting system logger: [ OK ]
Starting kernel logger: [ OK ]
Starting irqbalance: [ OK ]
Starting portmap: [ OK ]
Starting system message bus: [ OK ]
Mounting other filesystems: [ OK ]
Starting autofs: Loading autofs4: [ OK ]
Starting automount: [ OK ]
[ OK ]
Starting router discovery: [FAILED]
Server address not specified in /etc/sysconfig/netconsole
Starting sshd: [ OK ]
Starting cups: [ OK ]
Starting xinetd: [ OK ]
Starting ntpd: [ OK ]
Starting vsftpd for vsftpd: [ OK ]
Starting httpd: [ OK ]
Starting mldonkey: [ OK ]
Starting xfs: [ OK ]
Starting SMB services: [ OK ]
Starting NMB services: [ OK ]
Starting VNC server: 0:jeffchan xauth: creating new authority file /home/jeffchan/.Xauthority
New 'arrows.localdomain:0 (jeffchan)' desktop is arrows.localdomain:0
Starting applications specified in /home/jeffchan/.vnc/xstartup
Log file is /home/jeffchan/.vnc/arrows.localdomain:0.log
[ OK ]
Starting Winbind services: [ OK ]
Starting anacron: [ OK ]
Starting atd: [ OK ]
Starting yum-updatesd: [ OK ]
Starting Avahi daemon... [ OK ]
Starting Avahi DNS daemon... [ OK ]
Starting HAL daemon: [ OK ]
Enabling Arrows POE...
cs5536_gpio: user_input 20, 3, 11, 5
cs5536_gpio: user_input 27, 3, 7, 3
cs5536_gpio: user_input 5, 3, 1, 6
bash: no job control in this shell
bash-3.2# exit
exit
cs5536_gpio: user_input 20, 3, 11, 5
cs5536_gpio: user_input 27, 3, 7, 3
cs5536_gpio: user_input 5, 3, 1, 6
bash: no job control in this shell
bash-3.2#
i hope you can help me with this issueI seem to have an 'easy' way of recovery.
but i need someone willing to send me a Binary/Image copy of the CFCard inside the WLC526-K9.
it may even be an old version, if it runs im good.
http://nexp.com.ua/miscellaneous/recovering-bricked-cisco-wlc-4400/ -
Hi
after a long time today I tried to update my arch system. I removed bin and sbin and /usr/sbin directories and perform the update. now I get this messy error which I have no idea on how to fix it.
error: failed to commit transaction (conflicting files)
glibc: /usr/bin/iconvconfig exists in filesystem
glibc: /usr/bin/nscd exists in filesystem
glibc: /usr/bin/sln exists in filesystem
glibc: /usr/bin/zdump exists in filesystem
glibc: /usr/bin/zic exists in filesystem
bash: /usr/bin/sh exists in filesystem
cracklib: /usr/bin/cracklib-check exists in filesystem
cracklib: /usr/bin/cracklib-format exists in filesystem
cracklib: /usr/bin/cracklib-packer exists in filesystem
cracklib: /usr/bin/cracklib-unpacker exists in filesystem
cracklib: /usr/bin/create-cracklib-dict exists in filesystem
pam: /usr/bin/mkhomedir_helper exists in filesystem
pam: /usr/bin/pam_tally exists in filesystem
pam: /usr/bin/pam_tally2 exists in filesystem
pam: /usr/bin/pam_timestamp_check exists in filesystem
pam: /usr/bin/unix_chkpwd exists in filesystem
pam: /usr/bin/unix_update exists in filesystem
libcap: /usr/bin/capsh exists in filesystem
libcap: /usr/bin/getcap exists in filesystem
libcap: /usr/bin/getpcaps exists in filesystem
libcap: /usr/bin/setcap exists in filesystem
kmod: /usr/bin/depmod exists in filesystem
kmod: /usr/bin/modprobe exists in filesystem
shadow: /usr/bin/chgpasswd exists in filesystem
shadow: /usr/bin/chpasswd exists in filesystem
shadow: /usr/bin/groupadd exists in filesystem
shadow: /usr/bin/groupdel exists in filesystem
shadow: /usr/bin/groupmems exists in filesystem
shadow: /usr/bin/groupmod exists in filesystem
shadow: /usr/bin/groups exists in filesystem
shadow: /usr/bin/grpck exists in filesystem
shadow: /usr/bin/grpconv exists in filesystem
shadow: /usr/bin/grpunconv exists in filesystem
shadow: /usr/bin/newusers exists in filesystem
shadow: /usr/bin/nologin exists in filesystem
shadow: /usr/bin/pwck exists in filesystem
shadow: /usr/bin/pwconv exists in filesystem
shadow: /usr/bin/pwunconv exists in filesystem
shadow: /usr/bin/useradd exists in filesystem
shadow: /usr/bin/userdel exists in filesystem
shadow: /usr/bin/usermod exists in filesystem
util-linux: /usr/bin/addpart exists in filesystem
util-linux: /usr/bin/agetty exists in filesystem
util-linux: /usr/bin/blkid exists in filesystem
util-linux: /usr/bin/blockdev exists in filesystem
util-linux: /usr/bin/cfdisk exists in filesystem
util-linux: /usr/bin/chcpu exists in filesystem
util-linux: /usr/bin/ctrlaltdel exists in filesystem
util-linux: /usr/bin/delpart exists in filesystem
util-linux: /usr/bin/dmesg exists in filesystem
util-linux: /usr/bin/fdformat exists in filesystem
util-linux: /usr/bin/fdisk exists in filesystem
util-linux: /usr/bin/findfs exists in filesystem
util-linux: /usr/bin/findmnt exists in filesystem
util-linux: /usr/bin/fsck exists in filesystem
util-linux: /usr/bin/fsck.cramfs exists in filesystem
util-linux: /usr/bin/fsck.minix exists in filesystem
util-linux: /usr/bin/fsfreeze exists in filesystem
util-linux: /usr/bin/fstrim exists in filesystem
util-linux: /usr/bin/hwclock exists in filesystem
util-linux: /usr/bin/kill exists in filesystem
util-linux: /usr/bin/ldattach exists in filesystem
util-linux: /usr/bin/login exists in filesystem
util-linux: /usr/bin/losetup exists in filesystem
util-linux: /usr/bin/lsblk exists in filesystem
util-linux: /usr/bin/mkfs exists in filesystem
util-linux: /usr/bin/mkfs.bfs exists in filesystem
util-linux: /usr/bin/mkfs.cramfs exists in filesystem
util-linux: /usr/bin/mkfs.minix exists in filesystem
util-linux: /usr/bin/mkswap exists in filesystem
util-linux: /usr/bin/more exists in filesystem
util-linux: /usr/bin/mount exists in filesystem
util-linux: /usr/bin/mountpoint exists in filesystem
util-linux: /usr/bin/partx exists in filesystem
util-linux: /usr/bin/pivot_root exists in filesystem
util-linux: /usr/bin/raw exists in filesystem
util-linux: /usr/bin/readprofile exists in filesystem
util-linux: /usr/bin/resizepart exists in filesystem
util-linux: /usr/bin/rtcwake exists in filesystem
util-linux: /usr/bin/sfdisk exists in filesystem
util-linux: /usr/bin/su exists in filesystem
util-linux: /usr/bin/sulogin exists in filesystem
util-linux: /usr/bin/swaplabel exists in filesystem
util-linux: /usr/bin/swapoff exists in filesystem
util-linux: /usr/bin/swapon exists in filesystem
util-linux: /usr/bin/switch_root exists in filesystem
util-linux: /usr/bin/umount exists in filesystem
util-linux: /usr/bin/uuidd exists in filesystem
util-linux: /usr/bin/vigr exists in filesystem
util-linux: /usr/bin/vipw exists in filesystem
util-linux: /usr/bin/wdctl exists in filesystem
util-linux: /usr/bin/wipefs exists in filesystem
e2fsprogs: /usr/bin/badblocks exists in filesystem
e2fsprogs: /usr/bin/debugfs exists in filesystem
e2fsprogs: /usr/bin/dumpe2fs exists in filesystem
e2fsprogs: /usr/bin/e2freefrag exists in filesystem
e2fsprogs: /usr/bin/e2fsck exists in filesystem
e2fsprogs: /usr/bin/e2image exists in filesystem
e2fsprogs: /usr/bin/e2label exists in filesystem
e2fsprogs: /usr/bin/e2undo exists in filesystem
e2fsprogs: /usr/bin/e4defrag exists in filesystem
e2fsprogs: /usr/bin/filefrag exists in filesystem
e2fsprogs: /usr/bin/fsck.ext2 exists in filesystem
e2fsprogs: /usr/bin/fsck.ext3 exists in filesystem
e2fsprogs: /usr/bin/fsck.ext4 exists in filesystem
e2fsprogs: /usr/bin/fsck.ext4dev exists in filesystem
e2fsprogs: /usr/bin/logsave exists in filesystem
e2fsprogs: /usr/bin/mke2fs exists in filesystem
e2fsprogs: /usr/bin/mkfs.ext2 exists in filesystem
e2fsprogs: /usr/bin/mkfs.ext3 exists in filesystem
e2fsprogs: /usr/bin/mkfs.ext4 exists in filesystem
e2fsprogs: /usr/bin/mkfs.ext4dev exists in filesystem
e2fsprogs: /usr/bin/mklost+found exists in filesystem
e2fsprogs: /usr/bin/resize2fs exists in filesystem
e2fsprogs: /usr/bin/tune2fs exists in filesystem
libsasl: /usr/bin/pluginviewer exists in filesystem
libsasl: /usr/bin/sasldblistusers2 exists in filesystem
libsasl: /usr/bin/saslpasswd2 exists in filesystem
keyutils: /usr/bin/key.dns_resolver exists in filesystem
keyutils: /usr/bin/keyctl exists in filesystem
keyutils: /usr/bin/request-key exists in filesystem
krb5: /usr/bin/gss-server exists in filesystem
krb5: /usr/bin/kadmin.local exists in filesystem
krb5: /usr/bin/kadmind exists in filesystem
krb5: /usr/bin/kdb5_ldap_util exists in filesystem
krb5: /usr/bin/kdb5_util exists in filesystem
krb5: /usr/bin/kprop exists in filesystem
krb5: /usr/bin/kpropd exists in filesystem
krb5: /usr/bin/kproplog exists in filesystem
krb5: /usr/bin/krb5-send-pr exists in filesystem
krb5: /usr/bin/krb5kdc exists in filesystem
krb5: /usr/bin/sim_server exists in filesystem
krb5: /usr/bin/sserver exists in filesystem
krb5: /usr/bin/uuserver exists in filesystem
avahi: /usr/bin/avahi-autoipd exists in filesystem
avahi: /usr/bin/avahi-daemon exists in filesystem
avahi: /usr/bin/avahi-dnsconfd exists in filesystem
gconf: /usr/bin/gconfpkg exists in filesystem
pciutils: /usr/bin/lspci exists in filesystem
pciutils: /usr/bin/setpci exists in filesystem
alsa-utils: /usr/bin/alsactl exists in filesystem
apache: /usr/bin/ab exists in filesystem
apache: /usr/bin/apachectl exists in filesystem
apache: /usr/bin/apxs exists in filesystem
apache: /usr/bin/checkgid exists in filesystem
apache: /usr/bin/dbmmanage exists in filesystem
apache: /usr/bin/envvars exists in filesystem
apache: /usr/bin/envvars-std exists in filesystem
apache: /usr/bin/htcacheclean exists in filesystem
apache: /usr/bin/htdbm exists in filesystem
apache: /usr/bin/htdigest exists in filesystem
apache: /usr/bin/htpasswd exists in filesystem
apache: /usr/bin/httpd exists in filesystem
apache: /usr/bin/httpd.itk exists in filesystem
apache: /usr/bin/httpd.worker exists in filesystem
apache: /usr/bin/httxt2dbm exists in filesystem
apache: /usr/bin/logresolve exists in filesystem
apache: /usr/bin/rotatelogs exists in filesystem
apache: /usr/bin/suexec exists in filesystem
icu: /usr/bin/genccode exists in filesystem
icu: /usr/bin/gencmn exists in filesystem
icu: /usr/bin/gennorm2 exists in filesystem
icu: /usr/bin/gensprep exists in filesystem
icu: /usr/bin/icupkg exists in filesystem
ca-certificates: /usr/bin/update-ca-certificates exists in filesystem
v4l-utils: /usr/bin/v4l2-dbg exists in filesystem
gnupg: /usr/bin/addgnupghome exists in filesystem
gnupg: /usr/bin/applygnupgdefaults exists in filesystem
cdrkit: /usr/bin/netscsid exists in filesystem
gpm: /usr/bin/gpm exists in filesystem
ca-certificates-java: /usr/bin/init-jks-keystore exists in filesystem
rtmpdump: /usr/bin/rtmpgw exists in filesystem
rtmpdump: /usr/bin/rtmpsrv exists in filesystem
rtmpdump: /usr/bin/rtmpsuck exists in filesystem
cifs-utils: /usr/bin/cifs.idmap exists in filesystem
cifs-utils: /usr/bin/cifs.upcall exists in filesystem
cpupower: /usr/bin/cpufreq-bench exists in filesystem
cronie: /usr/bin/anacron exists in filesystem
cronie: /usr/bin/crond exists in filesystem
device-mapper: /usr/bin/dmeventd exists in filesystem
device-mapper: /usr/bin/dmsetup exists in filesystem
cryptsetup: /usr/bin/cryptsetup exists in filesystem
cryptsetup: /usr/bin/cryptsetup-reencrypt exists in filesystem
cryptsetup: /usr/bin/veritysetup exists in filesystem
iptables: /usr/bin/ip6tables exists in filesystem
iptables: /usr/bin/ip6tables-restore exists in filesystem
iptables: /usr/bin/ip6tables-save exists in filesystem
iptables: /usr/bin/iptables exists in filesystem
iptables: /usr/bin/iptables-restore exists in filesystem
iptables: /usr/bin/iptables-save exists in filesystem
iptables: /usr/bin/xtables-multi exists in filesystem
iproute2: /usr/bin/arpd exists in filesystem
iproute2: /usr/bin/bridge exists in filesystem
iproute2: /usr/bin/ctstat exists in filesystem
iproute2: /usr/bin/genl exists in filesystem
iproute2: /usr/bin/ifcfg exists in filesystem
iproute2: /usr/bin/ifstat exists in filesystem
iproute2: /usr/bin/ip exists in filesystem
iproute2: /usr/bin/lnstat exists in filesystem
iproute2: /usr/bin/nstat exists in filesystem
iproute2: /usr/bin/routef exists in filesystem
iproute2: /usr/bin/routel exists in filesystem
iproute2: /usr/bin/rtacct exists in filesystem
iproute2: /usr/bin/rtmon exists in filesystem
iproute2: /usr/bin/rtpr exists in filesystem
iproute2: /usr/bin/rtstat exists in filesystem
iproute2: /usr/bin/ss exists in filesystem
iproute2: /usr/bin/tc exists in filesystem
dhclient: /usr/bin/dhclient exists in filesystem
dhclient: /usr/bin/dhclient-script exists in filesystem
dhcpcd: /usr/bin/dhcpcd exists in filesystem
dosfstools: /usr/bin/dosfsck exists in filesystem
dosfstools: /usr/bin/dosfslabel exists in filesystem
dosfstools: /usr/bin/fsck.msdos exists in filesystem
dosfstools: /usr/bin/fsck.vfat exists in filesystem
dosfstools: /usr/bin/mkdosfs exists in filesystem
dosfstools: /usr/bin/mkfs.msdos exists in filesystem
dosfstools: /usr/bin/mkfs.vfat exists in filesystem
procps-ng: /usr/bin/ps exists in filesystem
procps-ng: /usr/bin/sysctl exists in filesystem
pm-utils: /usr/bin/pm-hibernate exists in filesystem
pm-utils: /usr/bin/pm-powersave exists in filesystem
pm-utils: /usr/bin/pm-suspend exists in filesystem
pm-utils: /usr/bin/pm-suspend-hybrid exists in filesystem
usbmuxd: /usr/bin/usbmuxd exists in filesystem
wpa_supplicant: /usr/bin/wpa_cli exists in filesystem
wpa_supplicant: /usr/bin/wpa_passphrase exists in filesystem
wpa_supplicant: /usr/bin/wpa_supplicant exists in filesystem
ppp: /usr/bin/chat exists in filesystem
ppp: /usr/bin/plog exists in filesystem
ppp: /usr/bin/pppd exists in filesystem
ppp: /usr/bin/pppdump exists in filesystem
ppp: /usr/bin/pppoe-discovery exists in filesystem
ppp: /usr/bin/pppstats exists in filesystem
networkmanager: /usr/bin/NetworkManager exists in filesystem
fuse: /usr/bin/fusermount exists in filesystem
fuse: /usr/bin/mount.fuse exists in filesystem
fuse: /usr/bin/ulockmgr_server exists in filesystem
rtkit: /usr/bin/rtkitctl exists in filesystem
gdm: /usr/bin/gdm exists in filesystem
libatasmart: /usr/bin/skdump exists in filesystem
libatasmart: /usr/bin/sktest exists in filesystem
udisks2: /usr/bin/umount.udisks2 exists in filesystem
iputils: /usr/bin/arping exists in filesystem
iputils: /usr/bin/clockdiff exists in filesystem
iputils: /usr/bin/rarpd exists in filesystem
iputils: /usr/bin/rdisc exists in filesystem
iputils: /usr/bin/tftpd exists in filesystem
iputils: /usr/bin/tracepath exists in filesystem
iputils: /usr/bin/tracepath6 exists in filesystem
grub: /usr/bin/grub-bios-setup exists in filesystem
grub: /usr/bin/grub-install exists in filesystem
grub: /usr/bin/grub-mkconfig exists in filesystem
grub: /usr/bin/grub-mknetdir exists in filesystem
grub: /usr/bin/grub-ofpathname exists in filesystem
grub: /usr/bin/grub-probe exists in filesystem
grub: /usr/bin/grub-reboot exists in filesystem
grub: /usr/bin/grub-set-default exists in filesystem
grub: /usr/bin/grub-sparc64-setup exists in filesystem
inetutils: /usr/bin/dnsdomainname exists in filesystem
inetutils: /usr/bin/ftpd exists in filesystem
inetutils: /usr/bin/rlogind exists in filesystem
inetutils: /usr/bin/rshd exists in filesystem
inetutils: /usr/bin/talkd exists in filesystem
inetutils: /usr/bin/telnetd exists in filesystem
jfsutils: /usr/bin/fsck.jfs exists in filesystem
jfsutils: /usr/bin/jfs_debugfs exists in filesystem
jfsutils: /usr/bin/jfs_fsck exists in filesystem
jfsutils: /usr/bin/jfs_fscklog exists in filesystem
jfsutils: /usr/bin/jfs_logdump exists in filesystem
jfsutils: /usr/bin/jfs_mkfs exists in filesystem
jfsutils: /usr/bin/jfs_tune exists in filesystem
jfsutils: /usr/bin/mkfs.jfs exists in filesystem
kexec-tools: /usr/bin/kdump exists in filesystem
kexec-tools: /usr/bin/kexec exists in filesystem
kexec-tools: /usr/bin/vmcore-dmesg exists in filesystem
libbonobo: /usr/bin/bonobo-activation-sysconf exists in filesystem
tar: /usr/bin/tar exists in filesystem
lirc-utils: /usr/bin/lircd exists in filesystem
lirc-utils: /usr/bin/lircmd exists in filesystem
logrotate: /usr/bin/logrotate exists in filesystem
lsof: /usr/bin/lsof exists in filesystem
lvm2: /usr/bin/blkdeactivate exists in filesystem
lvm2: /usr/bin/fsadm exists in filesystem
lvm2: /usr/bin/lvchange exists in filesystem
lvm2: /usr/bin/lvconvert exists in filesystem
lvm2: /usr/bin/lvcreate exists in filesystem
lvm2: /usr/bin/lvdisplay exists in filesystem
lvm2: /usr/bin/lvextend exists in filesystem
lvm2: /usr/bin/lvm exists in filesystem
lvm2: /usr/bin/lvmchange exists in filesystem
lvm2: /usr/bin/lvmconf exists in filesystem
lvm2: /usr/bin/lvmdiskscan exists in filesystem
lvm2: /usr/bin/lvmdump exists in filesystem
lvm2: /usr/bin/lvmetad exists in filesystem
lvm2: /usr/bin/lvmsadc exists in filesystem
lvm2: /usr/bin/lvmsar exists in filesystem
lvm2: /usr/bin/lvreduce exists in filesystem
lvm2: /usr/bin/lvremove exists in filesystem
lvm2: /usr/bin/lvrename exists in filesystem
lvm2: /usr/bin/lvresize exists in filesystem
lvm2: /usr/bin/lvs exists in filesystem
lvm2: /usr/bin/lvscan exists in filesystem
lvm2: /usr/bin/pvchange exists in filesystem
lvm2: /usr/bin/pvck exists in filesystem
lvm2: /usr/bin/pvcreate exists in filesystem
lvm2: /usr/bin/pvdisplay exists in filesystem
lvm2: /usr/bin/pvmove exists in filesystem
lvm2: /usr/bin/pvremove exists in filesystem
lvm2: /usr/bin/pvresize exists in filesystem
lvm2: /usr/bin/pvs exists in filesystem
lvm2: /usr/bin/pvscan exists in filesystem
lvm2: /usr/bin/vgcfgbackup exists in filesystem
lvm2: /usr/bin/vgcfgrestore exists in filesystem
lvm2: /usr/bin/vgchange exists in filesystem
lvm2: /usr/bin/vgck exists in filesystem
lvm2: /usr/bin/vgconvert exists in filesystem
lvm2: /usr/bin/vgcreate exists in filesystem
lvm2: /usr/bin/vgdisplay exists in filesystem
lvm2: /usr/bin/vgexport exists in filesystem
lvm2: /usr/bin/vgextend exists in filesystem
lvm2: /usr/bin/vgimport exists in filesystem
lvm2: /usr/bin/vgimportclone exists in filesystem
lvm2: /usr/bin/vgmerge exists in filesystem
lvm2: /usr/bin/vgmknodes exists in filesystem
lvm2: /usr/bin/vgreduce exists in filesystem
lvm2: /usr/bin/vgremove exists in filesystem
lvm2: /usr/bin/vgrename exists in filesystem
lvm2: /usr/bin/vgs exists in filesystem
lvm2: /usr/bin/vgscan exists in filesystem
lvm2: /usr/bin/vgsplit exists in filesystem
man-db: /usr/bin/accessdb exists in filesystem
mdadm: /usr/bin/mdadm exists in filesystem
mdadm: /usr/bin/mdassemble exists in filesystem
mdadm: /usr/bin/mdmon exists in filesystem
net-snmp: /usr/bin/snmpd exists in filesystem
net-snmp: /usr/bin/snmptrapd exists in filesystem
net-tools: /usr/bin/arp exists in filesystem
net-tools: /usr/bin/ifconfig exists in filesystem
net-tools: /usr/bin/ipmaddr exists in filesystem
net-tools: /usr/bin/iptunnel exists in filesystem
net-tools: /usr/bin/mii-tool exists in filesystem
net-tools: /usr/bin/nameif exists in filesystem
net-tools: /usr/bin/netstat exists in filesystem
net-tools: /usr/bin/plipconfig exists in filesystem
net-tools: /usr/bin/rarp exists in filesystem
net-tools: /usr/bin/route exists in filesystem
net-tools: /usr/bin/slattach exists in filesystem
xinetd: /usr/bin/itox exists in filesystem
xinetd: /usr/bin/xconv.pl exists in filesystem
xinetd: /usr/bin/xinetd exists in filesystem
netkit-bsd-finger: /usr/bin/in.fingerd exists in filesystem
pptpclient: /usr/bin/pptp exists in filesystem
pptpclient: /usr/bin/pptpsetup exists in filesystem
vpnc: /usr/bin/vpnc exists in filesystem
vpnc: /usr/bin/vpnc-disconnect exists in filesystem
ntfs-3g: /usr/bin/mkntfs exists in filesystem
ntfs-3g: /usr/bin/ntfsclone exists in filesystem
ntfs-3g: /usr/bin/ntfscp exists in filesystem
ntfs-3g: /usr/bin/ntfslabel exists in filesystem
ntfs-3g: /usr/bin/ntfsresize exists in filesystem
ntfs-3g: /usr/bin/ntfsundelete exists in filesystem
openssh: /usr/bin/sshd exists in filesystem
parted: /usr/bin/parted exists in filesystem
parted: /usr/bin/partprobe exists in filesystem
pcmciautils: /usr/bin/lspcmcia exists in filesystem
pcmciautils: /usr/bin/pccardctl exists in filesystem
vde2: /usr/bin/vde_tunctl exists in filesystem
reiserfsprogs: /usr/bin/debugreiserfs exists in filesystem
reiserfsprogs: /usr/bin/fsck.reiserfs exists in filesystem
reiserfsprogs: /usr/bin/mkfs.reiserfs exists in filesystem
reiserfsprogs: /usr/bin/mkreiserfs exists in filesystem
reiserfsprogs: /usr/bin/reiserfsck exists in filesystem
reiserfsprogs: /usr/bin/reiserfstune exists in filesystem
reiserfsprogs: /usr/bin/resize_reiserfs exists in filesystem
sane: /usr/bin/saned exists in filesystem
sudo: /usr/bin/visudo exists in filesystem
syslog-ng: /usr/bin/syslog-ng exists in filesystem
syslog-ng: /usr/bin/syslog-ng-ctl exists in filesystem
sysvinit-tools: /usr/bin/bootlogd exists in filesystem
sysvinit-tools: /usr/bin/fstab-decode exists in filesystem
sysvinit-tools: /usr/bin/killall5 exists in filesystem
sysvinit-tools: /usr/bin/pidof exists in filesystem
udisks: /usr/bin/umount.udisks exists in filesystem
zvbi: /usr/bin/zvbid exists in filesystem
vnstat: /usr/bin/vnstatd exists in filesystem
xfsprogs: /usr/bin/fsck.xfs exists in filesystem
xfsprogs: /usr/bin/mkfs.xfs exists in filesystem
xfsprogs: /usr/bin/xfs_admin exists in filesystem
xfsprogs: /usr/bin/xfs_bmap exists in filesystem
xfsprogs: /usr/bin/xfs_check exists in filesystem
xfsprogs: /usr/bin/xfs_copy exists in filesystem
xfsprogs: /usr/bin/xfs_db exists in filesystem
xfsprogs: /usr/bin/xfs_estimate exists in filesystem
xfsprogs: /usr/bin/xfs_freeze exists in filesystem
xfsprogs: /usr/bin/xfs_fsr exists in filesystem
xfsprogs: /usr/bin/xfs_growfs exists in filesystem
xfsprogs: /usr/bin/xfs_info exists in filesystem
xfsprogs: /usr/bin/xfs_io exists in filesystem
xfsprogs: /usr/bin/xfs_logprint exists in filesystem
xfsprogs: /usr/bin/xfs_mdrestore exists in filesystem
xfsprogs: /usr/bin/xfs_metadump exists in filesystem
xfsprogs: /usr/bin/xfs_mkfile exists in filesystem
xfsprogs: /usr/bin/xfs_ncheck exists in filesystem
xfsprogs: /usr/bin/xfs_quota exists in filesystem
xfsprogs: /usr/bin/xfs_repair exists in filesystem
xfsprogs: /usr/bin/xfs_rtcp exists in filesystem
Errors occurred, no packages were upgraded.
whould you please help me out of these?
thenk you.
Last edited by jgvr (2013-10-08 10:06:49)jrussell wrote:Also, I don't think you are supposed to remove those directories.... Are you referring to this? https://www.archlinux.org/news/binaries … ervention/
Judging from the output, I think that OP has a system from before that news post you linked and hasn't quite understood the news post correctly.
@jgvr: I think you have missed this news update and haven't read the forums on how to do it, thus ending up with a borked system.
My approach would be to move everything back to where it originally was, then upgrade everything (including AUR packages) except for glibc,bash and filesystem and see how far that gets you first. But as @Scimmia says, if you installation was from before Jan 2013, just re-install the whole thing.
Last edited by clfarron4 (2013-10-08 21:22:52) -
I pacman -Syu'ed today and i saw that the klibc packages were being upgraded, but when pacman checks for file conflicts it goes wrong:
[~] y -Su
:: Starting full system upgrade...
resolving dependencies...
looking for inter-conflicts...
Targets (10): cdparanoia-10.2-1 gpicview-0.1.10-2 udev-128-4 initscripts-2008.09-2 klibc-1.5.14-1 klibc-extras-2.5-1
klibc-kbd-1.15.20080312-7 klibc-module-init-tools-3.4-2 klibc-udev-128-1 mlocate-0.21-1
Total Download Size: 0,00 MB
Total Installed Size: 15,88 MB
Proceed with installation? [Y/n] Y
checking package integrity...
(10/10) checking for file conflicts [################################################################################] 100%
error: could not prepare transaction
error: failed to commit transaction (conflicting files)
klibc: /usr/lib/klibc/include/asm/Kbuild exists in filesystem
klibc: /usr/lib/klibc/include/asm/a.out-core.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/a.out.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/acpi.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/agp.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/alternative-asm.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/alternative.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/apic.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/apicdef.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/arch_hooks.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/asm-offsets.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/asm.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/atomic.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/atomic_32.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/atomic_64.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/auxvec.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/bios_ebda.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/bitops.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/boot.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/bootparam.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/bug.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/bugs.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/byteorder.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/cache.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/cacheflush.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/calgary.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/calling.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/checksum.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/checksum_32.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/checksum_64.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/cmpxchg.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/cmpxchg_32.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/cmpxchg_64.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/compat.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/cpu.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/cpufeature.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/cputime.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/current.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/current_32.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/current_64.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/debugreg.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/delay.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/desc.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/desc_defs.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/device.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/div64.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/dma-mapping.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/dma.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/dmi.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/ds.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/dwarf2.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/dwarf2_32.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/dwarf2_64.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/e820.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/e820_32.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/e820_64.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/edac.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/efi.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/elf.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/emergency-restart.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/errno.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/fb.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/fcntl.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/fixmap.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/fixmap_32.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/fixmap_64.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/floppy.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/frame.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/futex.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/gart.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/genapic.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/genapic_32.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/genapic_64.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/geode.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/gpio.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/hardirq.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/hardirq_32.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/hardirq_64.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/highmem.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/hpet.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/hugetlb.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/hw_irq.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/hw_irq_32.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/hw_irq_64.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/hypertransport.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/i387.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/i8253.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/i8259.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/ia32.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/ia32_unistd.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/ide.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/idle.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/intel_arch_perfmon.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/io.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/io_32.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/io_64.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/io_apic.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/ioctl.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/ioctls.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/iommu.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/ipcbuf.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/ipi.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/irq.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/irq_32.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/irq_64.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/irq_regs.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/irq_regs_32.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/irq_regs_64.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/irqflags.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/ist.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/k8.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/kdebug.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/kexec.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/kgdb.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/kmap_types.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/kprobes.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/kvm.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/kvm_host.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/kvm_para.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/kvm_x86_emulate.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/ldt.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/lguest.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/lguest_hcall.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/linkage.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/local.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/mach-bigsmp/mach_apic.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/mach-bigsmp/mach_apicdef.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/mach-bigsmp/mach_ipi.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/mach-bigsmp/mach_mpspec.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/mach-default/apm.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/mach-default/do_timer.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/mach-default/entry_arch.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/mach-default/irq_vectors.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/mach-default/irq_vectors_limits.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/mach-default/mach_apic.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/mach-default/mach_apicdef.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/mach-default/mach_ipi.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/mach-default/mach_mpparse.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/mach-default/mach_mpspec.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/mach-default/mach_timer.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/mach-default/mach_traps.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/mach-default/mach_wakecpu.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/mach-default/pci-functions.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/mach-default/setup_arch.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/mach-default/smpboot_hooks.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/mach-es7000/mach_apic.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/mach-es7000/mach_apicdef.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/mach-es7000/mach_ipi.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/mach-es7000/mach_mpparse.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/mach-es7000/mach_mpspec.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/mach-es7000/mach_wakecpu.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/mach-generic/gpio.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/mach-generic/irq_vectors_limits.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/mach-generic/mach_apic.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/mach-generic/mach_apicdef.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/mach-generic/mach_ipi.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/mach-generic/mach_mpparse.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/mach-generic/mach_mpspec.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/mach-numaq/mach_apic.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/mach-numaq/mach_apicdef.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/mach-numaq/mach_ipi.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/mach-numaq/mach_mpparse.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/mach-numaq/mach_mpspec.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/mach-numaq/mach_wakecpu.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/mach-rdc321x/gpio.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/mach-rdc321x/rdc321x_defs.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/mach-summit/irq_vectors_limits.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/mach-summit/mach_apic.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/mach-summit/mach_apicdef.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/mach-summit/mach_ipi.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/mach-summit/mach_mpparse.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/mach-summit/mach_mpspec.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/mach-visws/cobalt.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/mach-visws/entry_arch.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/mach-visws/irq_vectors.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/mach-visws/lithium.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/mach-visws/mach_apic.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/mach-visws/mach_apicdef.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/mach-visws/piix4.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/mach-visws/setup_arch.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/mach-visws/smpboot_hooks.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/mach-voyager/do_timer.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/mach-voyager/entry_arch.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/mach-voyager/irq_vectors.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/mach-voyager/setup_arch.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/math_emu.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/mc146818rtc.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/mca.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/mca_dma.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/mce.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/mman.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/mmu.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/mmu_context.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/mmu_context_32.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/mmu_context_64.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/mmx.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/mmzone.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/mmzone_32.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/mmzone_64.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/module.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/mpspec.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/mpspec_def.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/msgbuf.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/msidef.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/msr-index.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/msr.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/mtrr.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/mutex.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/mutex_32.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/mutex_64.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/namei.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/nmi.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/nops.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/numa.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/numa_32.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/numa_64.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/numaq.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/olpc.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/page.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/page_32.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/page_64.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/param.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/paravirt.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/parport.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/pat.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/pci-direct.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/pci.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/pci_32.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/pci_64.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/pda.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/percpu.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/pgalloc.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/pgtable-2level-defs.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/pgtable-2level.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/pgtable-3level-defs.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/pgtable-3level.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/pgtable.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/pgtable_32.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/pgtable_64.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/poll.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/posix_types.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/posix_types_32.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/posix_types_64.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/prctl.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/processor-cyrix.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/processor-flags.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/processor.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/proto.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/ptrace-abi.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/ptrace.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/pvclock-abi.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/pvclock.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/reboot.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/reboot_fixups.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/required-features.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/resource.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/resume-trace.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/rio.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/rtc.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/rwlock.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/rwsem.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/scatterlist.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/seccomp.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/seccomp_32.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/seccomp_64.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/sections.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/segment.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/semaphore.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/sembuf.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/serial.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/setup.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/shmbuf.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/shmparam.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/sigcontext.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/sigcontext32.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/siginfo.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/signal.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/smp.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/socket.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/sockios.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/sparsemem.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/spinlock.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/spinlock_types.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/srat.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/stacktrace.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/stat.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/statfs.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/string.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/string_32.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/string_64.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/suspend.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/suspend_32.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/suspend_64.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/swiotlb.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/sync_bitops.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/system.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/system_64.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/tce.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/termbits.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/termios.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/therm_throt.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/thread_info.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/thread_info_32.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/thread_info_64.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/time.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/timer.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/timex.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/tlb.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/tlbflush.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/topology.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/trampoline.h exists in filesystem
klibc: /usr/lib/klibc/include/asrlist.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/seccomp.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/seccomp_32.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/seccomp_64.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/sections.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/segment.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/semaphore.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/sembuf.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/serial.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/setup.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/shmbuf.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/shmparam.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/sigcontext.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/sigcontext32.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/siginfo.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/signal.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/smp.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/socket.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/sockios.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/sparsemem.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/spinlock.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/spinlocm/tsc.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/types.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/uaccess.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/uaccess_32.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/uaccess_64.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/ucontext.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/unaligned.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/unistd.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/unistd_32.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/unistd_64.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/unwind.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/user.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/user32.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/user_32.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/user_64.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/uv/uv_hub.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/uv/uv_mmrs.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/vdso.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/vga.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/vgtod.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/vic.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/vm86.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/vmi.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/vmi_time.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/voyager.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/vsyscall.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/xen/events.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/xen/grant_table.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/xen/hypercall.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/xen/hypervisor.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/xen/interface.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/xen/page.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/xor.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/xor_32.h exists in filesystem
klibc: /usr/lib/klibc/include/asm/xor_64.h exists in filesystem
Errors occurred, no packages were upgraded.
Anyone else got the same problem?Hey everyone. So, I guess I'm one of those ones not bright enough to keep track of the new updates on the front page... so I went ahead with the update. Everything's great, ran fine.
Now, I'm travelling to another country for business and after I restarted my laptop... my laptop is dead. This is the first time I started it since the klibc update, and now it's complaining that it can't do a filesystems check (there's no fsck.ext3 to check with). I tried removing the asm symlink with the ArchLive system and forcing the update once again to no avail. What should I do? What are my options. I have to have this back up again by the weekend... help me out guys!!
Thanks
P.S. subscribing to the mailing list now... -
Sometimes fails to load the right codec (or chipset) for audio
Sometimes fails to load the right sound codec (or chipset) for at boot, I think that it's same issue with alsa and OSS.
At boot time (toshiba u300) alsa (or kernel maybe) fails to load sound.
When it works this is loaded:
kike ~ $ log -b | grep "snd_"
jul 02 22:46:10 dokan-laptop kernel: snd_hda_intel 0000:00:1b.0: irq 48 for MSI/MSI-X
kike ~ $ amixer info
Card default 'Intel'/'HDA Intel at 0xf0800000 irq 48'
Mixer name : 'Realtek ALC268'
Components : 'HDA:10ec0268,10ec0268,00100003 HDA:11c11040,11790001,00100200'
Controls : 34
Simple ctrls : 14
kike ~ $ cat /proc/asound/cards
0 [Intel ]: HDA-Intel - HDA Intel
HDA Intel at 0xf0800000 irq 45
kike ~ $ cat /proc/asound/card0/codec#* | grep Codec
Codec: Realtek ALC268
Codec: LSI ID 1040
kike ~ $ modinfo soundcore
filename: /lib/modules/3.9.7-1-ARCH/kernel/sound/soundcore.ko.gz
alias: char-major-14-*
license: GPL
author: Alan Cox
description: Core sound module
depends:
intree: Y
vermagic: 3.9.7-1-ARCH SMP preempt mod_unload modversions 686
parm: preclaim_oss:int
kike ~ $ alsactl init
Found hardware: "HDA-Intel" "Realtek ALC268" "HDA:10ec0268,1179ff50,00100003 HDA:11c11040,11790001,00100200" "0x1179" "0xff50"
Hardware is initialized using a generic method
kike ~ $ lspci | grep Audio
00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 03)
kike ~ $ lsmod | grep snd
snd_hda_codec_realtek 26353 1
snd_hda_intel 30415 0
snd_hda_codec 125545 2 snd_hda_codec_realtek,snd_hda_intel
snd_hwdep 4746 1 snd_hda_codec
snd_pcm 62851 2 snd_hda_codec,snd_hda_intel
snd_page_alloc 6038 2 snd_pcm,snd_hda_intel
snd_timer 14846 1 snd_pcm
snd 44486 6 snd_hda_codec_realtek,snd_hwdep,snd_timer,snd_pcm,snd_hda_codec,snd_hda_intel
soundcore 4386 1 snd
kike ~ $ aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: Intel [HDA Intel], device 0: ALC268 Analog [ALC268 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
kike ~ $ ls -l /dev/snd
total 0
drwxr-xr-x 2 root root 60 jul 8 14:45 by-path
crw-rw----+ 1 root audio 116, 6 jul 8 14:45 controlC0
crw-rw----+ 1 root audio 116, 5 jul 8 14:45 hwC0D0
crw-rw----+ 1 root audio 116, 4 jul 8 14:45 hwC0D1
crw-rw----+ 1 root audio 116, 3 jul 8 14:45 pcmC0D0c
crw-rw----+ 1 root audio 116, 2 jul 8 14:45 pcmC0D0p
crw-rw---- 1 root audio 116, 1 jul 8 14:45 seq
crw-rw----+ 1 root audio 116, 33 jul 8 14:45 timer
kike ~ $ speaker-test -Dplug:front -c2
speaker-test 1.0.27.1
Playback device is plug:front
Stream parameters are 48000Hz, S16_LE, 2 channels
Using 16 octaves of pink noise
Rate set to 48000Hz (requested 48000Hz)
Buffer size range from 64 to 1048576
Period size range from 32 to 524288
Using max buffer size 1048576
Periods = 4
was set period_size = 262144
was set buffer_size = 1048576
0 - Front Left
1 - Front Right
Time per period = 10,949396
0 - Front Left
1 - Front Right
Time per period = 10,959696
When sound doesn't works, only the codec «LSI ID 1040» is loaded, nor «Realtek ALC268» nor both:
kike ~ $ log -b | grep "snd_"
nov 21 07:47:20 dokan-laptop kernel: snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X
kike ~ $ amixer info
Card default 'Intel'/'HDA Intel at 0xf0800000 irq 45'
Mixer name : 'LSI ID 1040'
Components : 'HDA:11c11040,11790001,00100200'
Controls : 0
Simple ctrls : 0
kike ~ $ cat /proc/asound/cards
0 [Intel ]: HDA-Intel - HDA Intel
HDA Intel at 0xf0800000 irq 45
kike ~ $ cat /proc/asound/card0/codec#* | grep Codec
Codec: LSI ID 1040
kike ~ $ modinfo soundcore
filename: /lib/modules/3.11.6-1-ARCH/kernel/sound/soundcore.ko.gz
alias: char-major-14-*
license: GPL
author: Alan Cox
description: Core sound module
depends:
intree: Y
vermagic: 3.11.6-1-ARCH SMP preempt mod_unload modversions 686
parm: preclaim_oss:int
kike ~ $ alsactl init
Found hardware: "HDA-Intel" "LSI ID 1040" "HDA:11c11040,11790001,00100200" "0x1179" "0xff50"
Hardware is initialized using a generic method
kike ~ $ lspci | grep Audio
00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 03)
kike ~ $ lsmod | grep snd
snd_hda_intel 30903 0
snd_hda_codec 127562 1 snd_hda_intel
snd_hwdep 4746 1 snd_hda_codec
snd_pcm 63876 2 snd_hda_codec,snd_hda_intel
snd_page_alloc 5942 2 snd_pcm,snd_hda_intel
snd_timer 14942 1 snd_pcm
snd 44566 5 snd_hwdep,snd_timer,snd_pcm,snd_hda_codec,snd_hda_intel
soundcore 4386 1 snd
kike ~ $ aplay -l
**** List of PLAYBACK Hardware Devices ****
kike ~ $ ls -l /dev/snd
total 0
drwxr-xr-x 2 root root 60 nov 21 07:47 by-path
crw-rw----+ 1 root audio 116, 3 nov 21 07:47 controlC0
crw-rw----+ 1 root audio 116, 2 nov 21 07:47 hwC0D1
crw-rw---- 1 root audio 116, 1 nov 21 07:47 seq
crw-rw----+ 1 root audio 116, 33 nov 21 07:47 timer
kike ~ $ speaker-test
speaker-test 1.0.27.2
Playback device is default
Stream parameters are 48000Hz, S16_LE, 1 channels
Using 16 octaves of pink noise
Playback open error: -2,No existe el fichero o el directorio
kike ~ $
I've followed this topics without luck.
https://wiki.archlinux.org/index.php/Al … sound_card
https://mailman.archlinux.org/pipermail … 05092.html
https://www.kernel.org/doc/Documentatio … Models.txt
First I worked around alsa sound state, it doesn't work, then I tried to point my laptop model in «/etc/modprobe.d/alsa-base.conf» file:
options snd-hda-intel model=toshiba
options snd-hda-intel index=0
options bt87x index=-2
options cx88_alsa index=-2
options saa7134-alsa index=-2
options snd-atiixp-modem index=-2
options snd-intel8x0m index=-2
options snd-via82xx-modem index=-2
options snd-usb-audio index=-2
options snd-usb-caiaq index=-2
options snd-usb-ua101 index=-2
options snd-usb-us122l index=-2
options snd-usb-usx2y index=-2
options snd-pcsp index=-2
options snd-usb-audio index=-2
And last I've tried to load Realtek modules in «/etc/modules-load.d/alsa.conf» file:
snd
snd_hda_intel
snd_hda_codec
snd_pcm
snd_page_alloc
snd_timer
snd_hwdep
snd_hda_codec_realtek
And here is that commands shows this sesion:
kike ~ $ log -b | grep "snd_"
dic 22 08:23:20 dokan-laptop kernel: snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X
dic 22 08:23:21 dokan-laptop systemd-modules-load[146]: Inserted module 'snd_hda_intel'
dic 22 08:23:21 dokan-laptop systemd-modules-load[146]: Inserted module 'snd_hda_codec_realtek'
dic 22 08:23:26 dokan-laptop kernel: snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
dic 22 08:23:26 dokan-laptop kernel: snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
dic 22 08:23:26 dokan-laptop kernel: snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
dic 22 08:23:26 dokan-laptop kernel: snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
dic 22 08:23:26 dokan-laptop kernel: snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
dic 22 08:23:26 dokan-laptop kernel: snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
dic 22 08:23:26 dokan-laptop kernel: snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
dic 22 08:23:34 dokan-laptop kernel: snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
dic 22 08:23:35 dokan-laptop kernel: snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
dic 22 08:23:35 dokan-laptop kernel: snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
dic 22 08:23:35 dokan-laptop kernel: snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
dic 22 08:23:35 dokan-laptop kernel: snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
dic 22 08:23:35 dokan-laptop kernel: snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
dic 22 08:23:35 dokan-laptop kernel: snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
dic 22 08:23:36 dokan-laptop kernel: snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
dic 22 08:23:36 dokan-laptop kernel: snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
dic 22 08:23:36 dokan-laptop kernel: snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
dic 22 08:23:36 dokan-laptop kernel: snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
dic 22 08:23:36 dokan-laptop kernel: snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
dic 22 08:23:36 dokan-laptop kernel: snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
dic 22 08:23:36 dokan-laptop kernel: snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
dic 22 08:23:41 dokan-laptop kernel: snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
dic 22 08:23:41 dokan-laptop kernel: snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
dic 22 08:23:41 dokan-laptop kernel: snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
dic 22 08:23:41 dokan-laptop kernel: snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
dic 22 08:23:41 dokan-laptop kernel: snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
dic 22 08:23:41 dokan-laptop kernel: snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
dic 22 08:23:41 dokan-laptop kernel: snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
dic 22 08:23:46 dokan-laptop kernel: snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
dic 22 08:23:46 dokan-laptop kernel: snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
dic 22 08:23:46 dokan-laptop kernel: snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
dic 22 08:23:46 dokan-laptop kernel: snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
dic 22 08:23:46 dokan-laptop kernel: snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
dic 22 08:23:46 dokan-laptop kernel: snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
dic 22 08:23:46 dokan-laptop kernel: snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
dic 22 08:23:51 dokan-laptop kernel: snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
dic 22 08:23:51 dokan-laptop kernel: snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
dic 22 08:23:51 dokan-laptop kernel: snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
dic 22 08:23:51 dokan-laptop kernel: snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
dic 22 08:23:51 dokan-laptop kernel: snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
dic 22 08:23:51 dokan-laptop kernel: snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
dic 22 08:23:51 dokan-laptop kernel: snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
dic 22 08:23:56 dokan-laptop kernel: snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
dic 22 08:23:56 dokan-laptop kernel: snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
dic 22 08:23:56 dokan-laptop kernel: snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
dic 22 08:23:56 dokan-laptop kernel: snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
dic 22 08:23:56 dokan-laptop kernel: snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
dic 22 08:23:56 dokan-laptop kernel: snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
dic 22 08:23:56 dokan-laptop kernel: snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
dic 22 08:24:01 dokan-laptop kernel: snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
dic 22 08:24:01 dokan-laptop kernel: snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
dic 22 08:24:01 dokan-laptop kernel: snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
dic 22 08:24:01 dokan-laptop kernel: snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
dic 22 08:24:01 dokan-laptop kernel: snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
dic 22 08:24:02 dokan-laptop kernel: snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
dic 22 08:24:02 dokan-laptop kernel: snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
dic 22 08:24:06 dokan-laptop kernel: snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
dic 22 08:24:06 dokan-laptop kernel: snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
dic 22 08:24:06 dokan-laptop kernel: snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
dic 22 08:24:06 dokan-laptop kernel: snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
dic 22 08:24:06 dokan-laptop kernel: snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
dic 22 08:24:06 dokan-laptop kernel: snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
dic 22 08:24:06 dokan-laptop kernel: snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
dic 22 08:24:11 dokan-laptop kernel: snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
dic 22 08:24:11 dokan-laptop kernel: snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
dic 22 08:24:11 dokan-laptop kernel: snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
dic 22 08:24:11 dokan-laptop kernel: snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
dic 22 08:24:11 dokan-laptop kernel: snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
dic 22 08:24:11 dokan-laptop kernel: snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
dic 22 08:24:11 dokan-laptop kernel: snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
kike ~ $ amixer info
Card default 'Intel'/'HDA Intel at 0xf0800000 irq 45'
Mixer name : 'LSI ID 1040'
Components : 'HDA:11c11040,11790001,00100200'
Controls : 0
Simple ctrls : 0
kike ~ $ cat /proc/asound/cards
0 [Intel ]: HDA-Intel - HDA Intel
HDA Intel at 0xf0800000 irq 45
kike ~ $ cat /proc/asound/card0/codec#* | grep Codec
Codec: LSI ID 1040
kike ~ $ modinfo soundcore
filename: /lib/modules/3.12.5-1-ARCH/kernel/sound/soundcore.ko.gz
alias: char-major-14-*
license: GPL
author: Alan Cox
description: Core sound module
depends:
intree: Y
vermagic: 3.12.5-1-ARCH SMP preempt mod_unload modversions 686
parm: preclaim_oss:int
kike ~ $ alsactl init
Found hardware: "HDA-Intel" "LSI ID 1040" "HDA:11c11040,11790001,00100200" "0x1179" "0xff50"
Hardware is initialized using a generic method
kike ~ $ lspci | grep Audio
00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 03)
kike ~ $ lsmod | grep snd
snd_hda_codec_realtek 35534 0
snd_hda_intel 31255 0
snd_hda_codec 128858 2 snd_hda_codec_realtek,snd_hda_intel
snd_hwdep 4750 1 snd_hda_codec
snd_pcm 63880 2 snd_hda_codec,snd_hda_intel
snd_page_alloc 5978 2 snd_pcm,snd_hda_intel
snd_timer 14946 1 snd_pcm
snd 44566 6 snd_hda_codec_realtek,snd_hwdep,snd_timer,snd_pcm,snd_hda_codec,snd_hda_intel
soundcore 4386 1 snd
kike ~ $ aplay -l
**** List of PLAYBACK Hardware Devices ****
kike ~ $ ls -l /dev/snd
total 0
drwxr-xr-x 2 root root 60 dic 22 08:23 by-path
crw-rw----+ 1 root audio 116, 3 dic 22 08:23 controlC0
crw-rw----+ 1 root audio 116, 2 dic 22 08:23 hwC0D1
crw-rw---- 1 root audio 116, 1 dic 22 08:23 seq
crw-rw----+ 1 root audio 116, 33 dic 22 08:23 timer
kike ~ $ speaker-test -Dplug:front -c2
speaker-test 1.0.27.2
Playback device is plug:front
Stream parameters are 48000Hz, S16_LE, 2 channels
Using 16 octaves of pink noise
Playback open error: -2,No existe el fichero o el directorio
My next step is go into kernel but I think it's better to ask here first.
I have to say that before Arch it had installed Ubuntu 10.04 with OSS (problems with keyboard sound keys with alsa), lately before change to Arch I must to restart sound system before it works frequently with this procedure; «soundoff», then «soundon» absolutly freezes the laptop so I had to turn off it and turn on again, then «rm /usr/lib/oss/starting», and last «soundon», then it sometimes works.
Now my only way to have sound is to restart the system time and time again until it works.
Thanks for your advices.
Last edited by Dokan (2013-12-22 11:49:08)Maybe two kernel modules that try to control the same piece of hardware, but how can I know what modules are?
Blacklisting [https://wiki.archlinux.org/index.php/Ke … acklisting]
Blacklisting, in the context of kernel modules, is a mechanism to prevent the kernel module from loading. This could be useful if, for example, the associated hardware is not needed, or if loading that module causes problems: for instance there may be two kernel modules that try to control the same piece of hardware, and loading them together would result in a conflict.
Some modules are loaded as part of the initramfs. mkinitcpio -M will print out all autodetected modules: to prevent the initramfs from loading some of those modules, blacklist them in /etc/modprobe.d/modprobe.conf. Running mkinitcpio -v will list all modules pulled in by the various hooks (e.g. filesystem hook, SCSI hook, etc.). Remember to add that .conf file to the FILES section in /etc/mkinitcpio.conf (if you have not done so already) and rebuild the initramfs once you have blacklisted the modules, and to reboot afterwards.
# mkinitcpio -M
==> Modules autodetected
ac
acpi_cpufreq
ahci
ata_generic
ata_piix
battery
btusb
button
coretemp
ehci_pci
evdev
ext4
firewire_ohci
hid_generic
i2c_i801
i915
intel_agp
iTCO_wdt
iwl4965
joydev
kvm_intel
lpc_ich
microcode
pata_acpi
pcspkr
processor
psmouse
r592
r8169
sdhci_pci
sd_mod
serio_raw
shpchp
snd_hda_intel
sr_mod
thermal
toshiba_acpi
toshiba_bluetooth
uhci_hcd
usbcore
usbhid
uvcvideo
video
wmi
[root@dokan-laptop ~]# mkinitcpio -v
==> Starting dry run: 3.12.5-1-ARCH
-> Running build hook: [/usr/lib/initcpio/install/base]
adding file: /bin/busybox
adding symlink: /usr/lib/libc.so.6 -> libc-2.18.so
adding file: /usr/lib/libc-2.18.so
adding symlink: /lib/ld-linux.so.2 -> ld-2.18.so
adding file: /usr/lib/ld-2.18.so
adding symlink: /usr/bin/[ -> busybox
adding symlink: /usr/bin/[[ -> busybox
adding symlink: /usr/bin/ash -> busybox
adding symlink: /usr/bin/awk -> busybox
adding symlink: /usr/bin/basename -> busybox
adding symlink: /usr/bin/cat -> busybox
adding symlink: /usr/bin/chgrp -> busybox
adding symlink: /usr/bin/chmod -> busybox
adding symlink: /usr/bin/chown -> busybox
adding symlink: /usr/bin/chroot -> busybox
adding symlink: /usr/bin/clear -> busybox
adding symlink: /usr/bin/cp -> busybox
adding symlink: /usr/bin/cttyhack -> busybox
adding symlink: /usr/bin/cut -> busybox
adding symlink: /usr/bin/dd -> busybox
adding symlink: /usr/bin/df -> busybox
adding symlink: /usr/bin/dirname -> busybox
adding symlink: /usr/bin/dmesg -> busybox
adding symlink: /usr/bin/du -> busybox
adding symlink: /usr/bin/echo -> busybox
adding symlink: /usr/bin/egrep -> busybox
adding symlink: /usr/bin/env -> busybox
adding symlink: /usr/bin/expr -> busybox
adding symlink: /usr/bin/false -> busybox
adding symlink: /usr/bin/free -> busybox
adding symlink: /usr/bin/getopt -> busybox
adding symlink: /usr/bin/grep -> busybox
adding symlink: /usr/bin/halt -> busybox
adding symlink: /usr/bin/head -> busybox
adding symlink: /usr/bin/hexdump -> busybox
adding symlink: /usr/bin/ifconfig -> busybox
adding symlink: /usr/bin/init -> busybox
adding symlink: /usr/bin/install -> busybox
adding symlink: /usr/bin/ip -> busybox
adding symlink: /usr/bin/ipaddr -> busybox
adding symlink: /usr/bin/iplink -> busybox
adding symlink: /usr/bin/iproute -> busybox
adding symlink: /usr/bin/iprule -> busybox
adding symlink: /usr/bin/iptunnel -> busybox
adding symlink: /usr/bin/kbd_mode -> busybox
adding symlink: /usr/bin/kill -> busybox
adding symlink: /usr/bin/killall -> busybox
adding symlink: /usr/bin/less -> busybox
adding symlink: /usr/bin/ln -> busybox
adding symlink: /usr/bin/loadfont -> busybox
adding symlink: /usr/bin/loadkmap -> busybox
adding symlink: /usr/bin/losetup -> busybox
adding symlink: /usr/bin/ls -> busybox
adding symlink: /usr/bin/md5sum -> busybox
adding symlink: /usr/bin/mkdir -> busybox
adding symlink: /usr/bin/mkfifo -> busybox
adding symlink: /usr/bin/mknod -> busybox
adding symlink: /usr/bin/mktemp -> busybox
adding symlink: /usr/bin/mountpoint -> busybox
adding symlink: /usr/bin/mv -> busybox
adding symlink: /usr/bin/nc -> busybox
adding symlink: /usr/bin/netstat -> busybox
adding symlink: /usr/bin/nslookup -> busybox
adding symlink: /usr/bin/openvt -> busybox
adding symlink: /usr/bin/pgrep -> busybox
adding symlink: /usr/bin/pidof -> busybox
adding symlink: /usr/bin/ping -> busybox
adding symlink: /usr/bin/ping6 -> busybox
adding symlink: /usr/bin/poweroff -> busybox
adding symlink: /usr/bin/printf -> busybox
adding symlink: /usr/bin/ps -> busybox
adding symlink: /usr/bin/pwd -> busybox
adding symlink: /usr/bin/readlink -> busybox
adding symlink: /usr/bin/reboot -> busybox
adding symlink: /usr/bin/rm -> busybox
adding symlink: /usr/bin/rmdir -> busybox
adding symlink: /usr/bin/route -> busybox
adding symlink: /usr/bin/sed -> busybox
adding symlink: /usr/bin/seq -> busybox
adding symlink: /usr/bin/setfont -> busybox
adding symlink: /usr/bin/sh -> busybox
adding symlink: /usr/bin/sha1sum -> busybox
adding symlink: /usr/bin/sha256sum -> busybox
adding symlink: /usr/bin/sha512sum -> busybox
adding symlink: /usr/bin/sleep -> busybox
adding symlink: /usr/bin/sort -> busybox
adding symlink: /usr/bin/stat -> busybox
adding symlink: /usr/bin/strings -> busybox
adding symlink: /usr/bin/sync -> busybox
adding symlink: /usr/bin/tac -> busybox
adding symlink: /usr/bin/tail -> busybox
adding symlink: /usr/bin/telnet -> busybox
adding symlink: /usr/bin/test -> busybox
adding symlink: /usr/bin/tftp -> busybox
adding symlink: /usr/bin/touch -> busybox
adding symlink: /usr/bin/true -> busybox
adding symlink: /usr/bin/umount -> busybox
adding symlink: /usr/bin/uname -> busybox
adding symlink: /usr/bin/uniq -> busybox
adding symlink: /usr/bin/uptime -> busybox
adding symlink: /usr/bin/vi -> busybox
adding symlink: /usr/bin/wc -> busybox
adding symlink: /usr/bin/wget -> busybox
adding symlink: /usr/bin/yes -> busybox
adding file: /usr/sbin/kmod
adding symlink: /usr/lib/libz.so.1 -> libz.so.1.2.8
adding file: /usr/lib/libz.so.1.2.8
adding symlink: /usr/bin/depmod -> kmod
adding symlink: /usr/bin/insmod -> kmod
adding symlink: /usr/bin/rmmod -> kmod
adding symlink: /usr/bin/lsmod -> kmod
adding symlink: /usr/bin/modprobe -> kmod
adding symlink: /usr/bin/modinfo -> kmod
adding file: /usr/sbin/blkid
adding symlink: /usr/lib/libblkid.so.1 -> libblkid.so.1.1.0
adding file: /usr/lib/libblkid.so.1.1.0
adding symlink: /usr/lib/libuuid.so.1 -> libuuid.so.1.3.0
adding file: /usr/lib/libuuid.so.1.3.0
adding file: /usr/sbin/mount
adding symlink: /usr/lib/libmount.so.1 -> libmount.so.1.1.0
adding file: /usr/lib/libmount.so.1.1.0
adding file: /usr/sbin/switch_root
adding file: /init_functions
adding file: /init
adding file: /usr/lib/modprobe.d/usb-load-ehci-first.conf
-> Running build hook: [/usr/lib/initcpio/install/udev]
adding file: /etc/udev/udev.conf
adding file: /usr/lib/systemd/systemd-udevd
adding symlink: /usr/lib/librt.so.1 -> librt-2.18.so
adding file: /usr/lib/librt-2.18.so
adding symlink: /usr/lib/libkmod.so.2 -> libkmod.so.2.2.5
adding file: /usr/lib/libkmod.so.2.2.5
adding symlink: /usr/lib/libacl.so.1 -> libacl.so.1.1.0
adding file: /usr/lib/libacl.so.1.1.0
adding symlink: /usr/lib/libpthread.so.0 -> libpthread-2.18.so
adding file: /usr/lib/libpthread-2.18.so
adding symlink: /usr/lib/libattr.so.1 -> libattr.so.1.1.0
adding file: /usr/lib/libattr.so.1.1.0
adding file: /usr/bin/udevadm
adding file: /usr/bin/systemd-tmpfiles
adding symlink: /usr/lib/libcap.so.2 -> libcap.so.2.22
adding file: /usr/lib/libcap.so.2.22
adding file: /usr/lib/udev/rules.d/50-udev-default.rules
adding file: /usr/lib/udev/rules.d/60-persistent-storage.rules
adding file: /usr/lib/udev/rules.d/64-btrfs.rules
adding file: /usr/lib/udev/rules.d/80-drivers.rules
adding file: /usr/lib/udev/ata_id
adding file: /usr/lib/udev/scsi_id
adding file: /hooks/udev
-> Running build hook: [/usr/lib/initcpio/install/autodetect]
caching 44 modules
-> Running build hook: [/usr/lib/initcpio/install/modconf]
adding dir: /etc/modprobe.d
adding file: /etc/modprobe.d/alsa-base.conf
overwriting file: /usr/lib/modprobe.d/usb-load-ehci-first.conf
-> Running build hook: [/usr/lib/initcpio/install/block]
adding module: scsi_mod
adding module: sd_mod
adding module: cdrom
adding module: sr_mod
adding module: libata
adding module: pata_acpi
adding module: ata_generic
adding module: libahci
adding module: ahci
adding module: ata_piix
adding module: usb-common
adding module: usbcore
adding module: ehci-hcd
adding module: ehci_pci
adding module: uhci_hcd
adding module: crc-itu-t
adding module: firewire-core
adding module: firewire_ohci
adding module: mmc_core
adding module: sdhci
adding module: sdhci_pci
adding module: firewire-sbp2
adding module: usb_storage
adding module: mmc_block
-> Running build hook: [/usr/lib/initcpio/install/lvm2]
adding module: dm-mod
adding module: dm-snapshot
adding module: dm-log
adding module: dm-region-hash
adding module: dm-mirror
adding file: /usr/bin/lvm
adding symlink: /usr/lib/libudev.so.1 -> libudev.so.1.4.0
adding file: /usr/lib/libudev.so.1.4.0
adding symlink: /usr/lib/libdl.so.2 -> libdl-2.18.so
adding file: /usr/lib/libdl-2.18.so
adding file: /usr/lib/libdevmapper-event.so.1.02
adding file: /usr/lib/libdevmapper.so.1.02
adding symlink: /usr/lib/libreadline.so.6 -> libreadline.so.6.2
adding file: /usr/lib/libreadline.so.6.2
adding symlink: /usr/lib/libncursesw.so.5 -> libncursesw.so.5.9
adding file: /usr/lib/libncursesw.so.5.9
adding file: /usr/bin/lvmetad
adding file: /usr/bin/dmsetup
adding file: /usr/lib/udev/rules.d/10-dm.rules
adding file: /usr/lib/udev/rules.d/13-dm-disk.rules
adding file: /usr/lib/udev/rules.d/95-dm-notify.rules
adding file: /usr/lib/udev/rules.d/11-dm-lvm.rules
adding file: /usr/lib/udev/rules.d/69-dm-lvm-metad.rules
adding file: /usr/lib/udev/rules.d/11-dm-initramfs.rules
adding file: /etc/lvm/lvm.conf
adding file: /hooks/lvm2
-> Running build hook: [/usr/lib/initcpio/install/filesystems]
adding module: mbcache
adding module: jbd2
adding module: crc16
adding module: ext4
-> Running build hook: [/usr/lib/initcpio/install/keyboard]
adding module: hid
adding module: hid_generic
adding module: usbhid
-> Running build hook: [/usr/lib/initcpio/install/fsck]
adding file: /usr/sbin/fsck.ext4
adding symlink: /usr/lib/libext2fs.so.2 -> libext2fs.so.2.4
adding file: /usr/lib/libext2fs.so.2.4
adding symlink: /usr/lib/libcom_err.so.2 -> libcom_err.so.2.1
adding file: /usr/lib/libcom_err.so.2.1
adding symlink: /usr/lib/libe2p.so.2 -> libe2p.so.2.3
adding file: /usr/lib/libe2p.so.2.3
adding symlink: /usr/bin/fsck.ext2 -> fsck.ext4
adding symlink: /usr/bin/fsck.ext3 -> fsck.ext4
adding file: /usr/sbin/fsck
==> Generating module dependencies
==> Dry run complete, use -g IMAGE to generate a real image
[root@dokan-laptop ~]# nano /etc/modprobe.d/alsa-base.conf
options snd-hda-intel model=toshiba
options snd-hda-intel index=0
options bt87x index=-2
options cx88_alsa index=-2
options saa7134-alsa index=-2
options snd-atiixp-modem index=-2
options snd-intel8x0m index=-2
options snd-via82xx-modem index=-2
options snd-usb-audio index=-2
options snd-usb-caiaq index=-2
options snd-usb-ua101 index=-2
options snd-usb-us122l index=-2
options snd-usb-usx2y index=-2
options snd-pcsp index=-2
options snd-usb-audio index=-2
Maybe you are looking for
-
How to delete apps from multiple devices?
I have multiple IOS devices that share a single Apple-id. Is there a way to delete the app from all IOS devices automatically, or do I have to delete it from each device? Also, why do deleted APPs come back when the devices are sync'd (via cable) to
-
Selection Screen Parameters in SQL statements
Very new ABAP programmer here, so sorry if this is a really dumb question. I'm trying to use my selection screen parameters to limit what is pulled in by my SQL statement (which seems to me to be a very logical thing to do). But I'm having a problem
-
Assembled new computer / w MSI 1950Pro - NO POST = No Power ??
Just assembled a new machine but I can´t get any picture to my monitor. All seems to be ok, cables attached and checked everywhere, fans are spinning. Specs: C2Duo E4300 Abit IB9 Buffalo 1GB 800Mhz (D2U800CZ-1GMBJ) MSI RX1950PRO Barracuda 320GB Sa
-
MacBook crashed during update - will not boot
My wife was using iTunes and was prompted to do seven updates on our MacBook. She was told to hold in the power button during the update, and the machine reset. Now the machine will not boot and just accesses the CD/DVD drive over and over. Does anyo
-
How do you download iphone 4 apps to a dell pc to make room for apple os update
How do you download iphone 4 apps to a dell pc to make room for apple os upgrade and transfer it back to the iphone