0 Channels foun in RWB

Hi,
   After configuring all the staffs in XI, while trying to check the connectivity in RWB in XI (RunTime Workbench), I have found that it is not able to find any channels. It's saying "0 Channels Found".
    I checked all the parameters also, they are correct. Moreover if all the parameters are not correct then I think the exception it should throw in RWB, isn't that?
   Could anyone please help me actually where may be the problem be and what steps I need to follow to resolve this.
Thanks
Soumya

Hi Soumya,
Auto Cache refresh is not working.. seems like in your case..
So what you can do is select the row and click on refresh button.. i dont remember the exact ..but something like that..
or you can manually refresh the cache using the following link..
http://servername:j2eeport/CPACache/refresh?mode=full.
You need to use PIDIRUSER to refresh cache or any other user with similar authorization.
Ask your basis team to figure out why auto cache refresh is not working.
One thing i would suggest you is to check in XI server .. SM59 if INTEGRATION_DIRECTORY_HMI destination is working.
Regards,
Sumit

Similar Messages

How to set the specified communication channel invisible in RWB?

Hi,gurus:
We have many communication channels in our XI server.
You know that we can filter the communication channel in communicaiton channel monitoring.
Are there other methods to set the specified communication channel invisible in RWB without using filter or deleting the communication channel?
Thanks in advance.

Hey,
>Are there other methods to set the specified communication channel invisible in RWB without using filter
NO - To my Knowledge,
In RWB - you can stop/inactive the Adapter
Cheers
Agasthuri

Programmatically detect a PI channel stopped in RWB

Hello,
Does anybody know a way to programmatically detect a PI channel stopped in RWB?
Thanks,
Shawn

Hi,
To control communication channels externally, you use an HTTP GET or POST request to the following URL:
http(s)://host:port/AdapterFramework/ChannelAdminServlet?party=party&service=service&channel=channel&action=action
See this wiki,
http://wiki.sdn.sap.com/wiki/display/XI/ExternallyControllingtheCommunicationChannel
http://help.sap.com/saphelp_nwpi711/helpdata/en/45/0c86aab4d14dece10000000a11466f/content.htm
You can easily control comm channel through external control.
Please refer the HELP.SAP material on this.
In RWB you need to enable external control on communication channel.
http://help.sap.com/saphelp_nwpi71/helpdata/en/45/0c86aab4d14dece10000000a11466f/content.htm
To control communication channels externally, you use an HTTP GET or POST request to the following URL:
http(s)://host:port/AdapterFramework/ChannelAdminServlet?party=party&service=service&channel=channel&action=action
The XML structure of the HTTP response is documented in a document type definition (DTD) and an XML schema definition (XSD). You can call this information using HTTP at the following addresses:
● http(s)://host:port/AdapterFramework/channelAdmin/ChannelAdmin.dtd
● http(s)://host:port/AdapterFramework/channelAdmin/ChannelAdmin.xsd
You can try this through internet explorer also
http(s)://host:port/AdapterFramework/ChannelAdminServlet?party=party&service=service&channel=channel&action=action

System Error in Comm channel monitoring of RWB

Dear all,
I have a Proxy to webservice scenario (HCM-PI-SuccessFactors). At receiver side i am using SOAP AXIS adapter. In RWB, the status of the channel is green and running. But when i ping the channel, it shows System Error.
I have made changes in respective communication channels, activated and cleared the cache. Still same error.
Later taken complete restart of system. Still same error.
How to overcome this ?
Note : 1) End to end scenario is working fine
2) Among the three trusted certificates installed, status of one certificate is showing warning (status: which will expire on may 5).
Regards
Uday

Hi Hareesh,
Thanks for you input. I have used the standard swc SFIHCM01. Here it is mentioned that it is applicable for SWC MESSAGING SYSTEM SERVICE 7.31 as shown below
What does this MESSAGING SYSTEM SERVICE mean exactly. In general is it our PI system.
plz correct me if i am wrong
Regards
Uday

Comm Channels are not seen in the Communication Channel Monitoring in RWB

Hello All,
I am facing a strange Problem. In the RWB i am not able to see the Comm Channels that i have configured in the Integration Directory. In the Adapter Monitoring also I am not able to see the Adapters with Green Status.
I am on PI 7.0 and SP9. For a simple IDOC to File Scenario, the IDOC is getting sent but the File is not getting written. I have to monitor it for this. As the Comm Channels are not showing so I am not able to Montitor.
Can anyone please suggest me how to do this montoring and how can I see the Comm Channels that I have created.
Thanks in Anticipation
Best Regards
Chakra and Somnath

Hi,
1. Check created the Busieness system to identify your XI System.
Role of Business system : Integration Server
Pipleline : http://<hostname>:<ICM Port>/sap/xi/engine?type=entry.
2. In XI Tcode : SXMB_ADM
Role of Business system : Integration Server
Pipleline : http://<hostname>:<ICM Port>/sap/xi/engine?type=entry.
3. Go to SXMB_ADM
Execute Integration Engine and Configuration
Click on Check button check the SLD working fine or not.
Regards,
Venu.

Communication channel Authorization in rwb

Hi all
Could you please to help me..
How we can set up authorization for communication channel in rwb? like a user A can start/stop channel A but cannot for channel B or user B can start/stop for channel B but cannot for channel A.
Thanks and Regards
Park

Hi,
http://help.sap.com/saphelp_nw04/helpdata/en/f4/67b340be3dff5fe10000000a155106/content.htm
Thanks,
Madhu

Channels not monitorable in the Communication Channel Monitor / RWB

Hi,
Back on XI after a long break ☺
I am facing an issue with our in-house JCA adapter used in XI scenarios. When trying to monitor the channels using our adapter from the Communication Channel Monitor in RWB, I have the following:
Status: NA
Short Log: No adapter registered for this channel
The adapter is deployed and the integration scenarios using it work perfectly:
- sda package deployed through the SDM
- the metadata defined in the Design
- a valid and working configuration involving the scenario is defined
The messages are going through and are monitorable in both SXMB_MONI and RWB...
All other channels using system adapters (File, RFC, SOAP) do display a status (as a color icon) and a Short Log and they can be administered (start/stop) using the enabled buttons when selected
From the Adapter Monitor page, our adapter has a green status, and all the channels configured to use it display the status, Name and Text information...
I have no idea what could be the issue should the adapter implement a special interface to be monitored from the RWB, is it a configuration issue, permissions issue???
I saw 2 posts with this error message but they did not help me to figure out where the issue is
Thanks for your help,
Adalbert
Edited by: Adalbert Wysocki on Apr 29, 2008 6:52 AM

Hi Gouri,
Thanks for your response, I will try would suggestion for testing... but
I am wondering why the namespace has to be http://sap.com/xi/XI/sample ???
It sounds weird that this namespace has to be fixed... as the purpose of a namespace is to create a isolation/container for names... so it needs to be customizable...
I did not see anything in the Adapter Development guides related to this kind of constraints...
Thanks,
Adalbert

Comm channel not available in RWB comm channel monitoring

Hi All,
I've gone through this(Comm channel missing in comm channel monitoring) unanwered forum. I've facing the same issue.
In my ID, I created XI receiver adapter comm. channel. And data is flowing successfully to the receiver side through this Comm. channel
I'm aware that XI adapter in ID is used to send data via Proxy.
But why i'm not see that in the Comm. channel monitoring in RWB. If anyone has documentation please let me know.
Thanks.

Hi ,
The XI adapter resides in Integration engine thus you cannot see it in RWB. RWB shows comm channels which are in adapter engine. The simple proof is that you cannot enhance this adapter with your own modules on the Module tab page in the module processor. Here is the link to documentation
http://help.sap.com/saphelp_nw04/helpdata/en/f4/0a1640a991c742e10000000a1550b0/content.htm
regards
Anupam

Soap sender communication channel is not shown in RWB

Dear Experts,
We had a recent installation of Xi and after that i m attemting a Soap to rfc syn scenario and i have created both the soap and rfc communication channel on a abap business system.
and now im not able to see the Soap communication channel in the RWB .even the soap icon is shown as disable..
can u tell the reason for this.Or is it bcos i have not sent any soap request to it.
All ur efforts will be greatly respected.
Thx
jeevan

hai prabhu....
thxs for the hint,,,,.
i did that and its throwing the following error...
pls help
<?xml version="1.0" ?>
- <SOAP:Fault xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
<faultcode>SOAP:Server</faultcode>
<faultstring>Server Error</faultstring>
- <detail>
- <s:SystemError xmlns:s="http://sap.com/xi/WebService/xi2.0">
<context>XIAdapter</context>
<code>ADAPTER.SOAP_EXCEPTION</code>
- <text>
- <![CDATA[
java.lang.Exception: invalid channel (party:service:channel) = <null>
     at com.sap.aii.af.mp.soap.web.HelperServlet.processFindChannel(HelperServlet.java:363)
     at com.sap.aii.af.mp.soap.web.HelperServlet.doGet(HelperServlet.java:125)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:385)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:263)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:340)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:318)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:821)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:239)
     at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92)
     at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:147)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:37)
     at com.sap.engine.core.cluster.impl6.session.UnorderedChannel$MessageRunner.run(UnorderedChannel.java:71)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:94)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:162)
]]>
</text>
</s:SystemError>
</detail>
</SOAP:Fault>

CC not visible in RWB-Communication channel monitoring

Hi All,
Communication channel created in the directory is not visible in
Communication channel monitoring of RWB. I refresh ABAP cache, SXI_CACHE,
CPA cache. Still its not visible. Deleted and created again. Still no use.
None of the communication channels newly created are visible in RWB. Could anyone suggest some ideas to resolve this issue.
Thanks
Ricky

Hi
Just to be sure a basic question to start with : You do activate your channels in the ID after creation ?
Dirk

Problem in File Receiver comm channel

Hi,
I can't see anything in the Recevier communication channel in the RWB > Component Monitoring>Comm. channel monitoring-->Comm. channels.
I do have selected my comm channel.Its showing the message as "Comm. channel is configured correctly and started". But I cant see msgID and Explanation or error. Even, I cant fine any info in Error log.
The diagnosis i did as follows. Let me know if u come across any thing.
Checked the logs in VA but i didnt found any information and is not upto date. Bad luck
*Recreated the Rcvr comm channel again and teste. Nohope.
In the MONI its showing successfull, but i cant see output at destination.
*cache is uptodate
I have checked the queues, nothing got stuck.All queues are clear.
*I cant restart the Server since it is in production.
Your suggestions are highly appreciated.
Thanks
SRI

Nilesh,
All the things you mentioned are done by XI IS. FYI plz chk below..
Send binary file "/home/dpiadm/xi/tmp/passthru/EDI_250123.rpz", size 60, character encoding 8859_1 with QoS EO
2007-10-19 13:48:43 Success MP: Entering module processor
2007-10-19 13:48:43 Success MP: Processing local module localejbs/SFTPFileUploadDownloadAdapterModule
2007-10-19 13:48:43 Success 192.133.217.6 /XI/SFTPTest pimsp kuljasimsim EDI_250123.rpz /home/dpiadm/SridharRajuMahali /home/dpiadm/xi/tmp/passthru/ EDI_250123.rpz Enable
2007-10-19 13:48:43 Success EDI_250123.rpz
2007-10-19 13:48:43 Success SFTPOutBoundEDIFileToFile
2007-10-19 13:48:43 Success SFTP_Sender_File
2007-10-19 13:48:43 Success 8878c990-7e6b-11dc-8137-001a4b065b86
2007-10-19 13:48:43 Success SFTPServerNameOrIpAddress 192.133.217.6
2007-10-19 13:48:43 Success Indiashining.txt SFTPOutBoundEDIFileToFile SFTP_Sender_File 8878c990-7e6b-11dc-8137-001a4b065b86 SFTPOutBoundEEIFileToFile
UNDEFINED
2007-10-19 13:48:43 Success Host Key Verified
2007-10-19 13:48:43 Success Socket Opened for Transport and connected..
2007-10-19 13:48:43 Success SFTP SshClient is connected
2007-10-19 13:48:43 Success Authentication Method is Public Key
2007-10-19 13:48:43 Success Ssh2 Client is Connected and Authenticated
2007-10-19 13:48:43 Success pimsp kuljasimsim
2007-10-19 13:48:43 Success /XI/SFTPTest
2007-10-19 13:48:43 Success /XI/SFTPTest
2007-10-19 13:48:43 Success localFolder2 + dropFileName2 /home/dpiadm/xi/tmp/passthru/EDI_250123.rpz
Entering to download file
2007-10-19 13:48:43 Success Current Directory before LCD0 : /home/dpiadm
2007-10-19 13:48:43 Success Current Directory After LCD0 :/home/dpiadm/xi/tmp/passthru
2007-10-19 13:48:43 Success download completed
2007-10-19 13:48:43 Success MP: Processing local module localejbs/CallSapAdapter
2007-10-19 13:48:43 Success Application attempting to send an XI message asynchronously using connection File_http://sap.com/xi/XI/System.
2007-10-19 13:48:43 Success Trying to put the message into the send queue.
2007-10-19 13:48:43 Success Message successfully put into the queue.
2007-10-19 13:48:43 Success The application sent the message asynchronously using connection File_http://sap.com/xi/XI/System. Returning to application.
2007-10-19 13:48:43 Success MP: Leaving module processor
The message was successfully retrieved from the send queue.
2007-10-19 13:48:43 Success Confirmation mode test found. File sent.
2007-10-19 13:48:43 Success The message status set to DLNG.
2007-10-19 13:48:44 Success The message was successfully transmitted to endpoint http://quark:8005/sap/xi/engine?type=entry using connection File_http://sap.com/xi/XI/System.
2007-10-19 13:48:44 Success The message status set to DLVD.
2007-10-19 13:48:44 Success The message was successfully delivered.
Note:- I AM NOT ABLE TO SEE ANYTHING IN THE RCVR COMM CHANNEL(RWB).
any Idea about, where can I see the message if it got stuck in Integration server apart from logs
Thanks
Sri Raj

FCC Error in RWB

Hi All,
My scenario is Idoc to File scenario in which i am using FCC at the target end,
My data type structure was
RootNode
Level -
1
5 Fields
Level -
2
5 Fields
Level -
3
5 Fields
and my FCC parameters was ..
Level1.fieldFixedLengths --- 0,0, (As i dont want all these fields i marked as 0,0,....)
Level1.fixedLengthTooShortHandling -- Cut
Level1.endSeparator                           -- 'nl'
Level2.fieldFixedLengths                    --- 10,15,10,12,15
Level2.fixedLengthTooShortHandling -- Cut
Level2.endSeparator                           -- 'nl'
Level3.fieldFixedLengths --- 10,15,10,12,15
Level3.fixedLengthTooShortHandling -- Cut
Level3.endSeparator                           -- 'nl'
but, unable to find where actaully the error is..
This is the folllowing error which i am getting in Receiver comm channel monitoring in RWB.. I think the error is with FCC
Message processing failed. Cause: com.sap.engine.interfaces.messaging.api.exception.MessagingException: Error occurred while connecting to the FTP server "rps37ykf.rim.net:21": java.lang.Exception: Exception in XML Parser (format problem?):'java.lang.Exception: Message processing failed in XML parser: 'Conversion configuration error: Unknown structure 'ns0:RootNode' found in document', probably configuration error in file adapter (XML parser error)'
request your inputs to solve this issue..
regards,
sai

Hi..
RootNode ..is it the name of your Message type?
Yes Root Node is my message Type
Also are Level1,Level2,Level1 on same level?
Yes all the levels are in same level ..
If i need to suppress any one level at the output end how can i suppress it..
If i alter the Data type structure i can do it but the values which is populated at that level will be used by the other levels
Eg: i want to suppress level 1 but some functionality of that level will be used by the other 2 levels. so in the structure it is essential but at the target end i need to suppress those values..
can i suppress it using any other fixedlength funcitonality
regards,
sai

Sync/Async - JMS receiver comm. channel not processing

I have a Sync/Async scenario (without bpm) in PI 7.11:
RFC -> PI -> JMS
whereby the JMS receiver comm. channel does not fully process the message.
More specifically, the RFC sender comm. channel gets a message in and passes the message to the JMS channel, but that JMS channel within the RWB comm. channel log only shows the entry:
- Message processing started
The odd twist to this is that when we bring the PI server down, then back up again, (or wait a period of time, still trying to determine this period) the FIRST message attempt does successfully get processed, i.e. the first message on that JMS receiver comm. channel RWB log shows as:
- Channel successfully processed the message: 08499236-387c-11e0-b002-000025bab2c2
- Stored the correlation ID 08499236-387c-11e0-b002-000025bab2c2 of the request JMS message: ID:c3e2d840d4d8d4f24040404040404040c754dc12d8b54ec6 correponding to the XI message: 08499236-387c-11e0-b002-000025bab2c2
- Message processing started
(but then because of an issue on the target system, no response comes back, so then we'll additionally get the log entry:
- Message processing failed. Cause: com.sap.engine.interfaces.messaging.api.exception.MessagingException: no message received
Any suggestions appreciated on what I can check here to try and figure this out. Possibly because the first message eventually errors out, it is stopping the other subsequent msgs from getting processed...
When I check the audit logs of a 'success' msg vs. a not-successful msg, the success msg has an entry (and subsequent entries) of:
14.02.2011 12:50:19 Information Transform: transforming the payload ...
14.02.2011 12:50:19 Information Transform: successfully transformed
14.02.2011 12:50:19 Information ROB: entering RequestOnewayBean
14.02.2011 12:50:19 Information ROB: forwarding the request message
14.02.2011 12:50:19 Information ROB: leaving RequestOnewayBean
14.02.2011 12:50:19 Information JMS Message was forwarded to the JMS provider succesfully."
14.02.2011 12:50:19 Information XMB Message as Binary was forwarded to the SAP XI JMS service succesfully.
14.02.2011 12:50:19 Information WRB: entering WaitResponseBean
14.02.2011 12:50:19 Information WRB: retrieving the message for 08499236-387c-11e0-b002-000025bab2c2 ...
wheras the non-success msg shows only:
14.02.2011 12:55:30 Information Transform: transforming the payload ...
14.02.2011 12:55:30 Information Transform: successfully transformed
14.02.2011 12:55:30 Information ROB: entering RequestOnewayBean
14.02.2011 12:55:30 Information ROB: forwarding the request message
14.02.2011 12:55:30 Information ROB: leaving RequestOnewayBean
So, we can see that the message is not "forwarded to the JMS provider..." in the non-success case.
And also the sxi_monitor shows these messages with a status of "Log version".
Keith

Hi Siddhesh - yes that was a while back and am trying to remember the resolution. I have implemented sync/async bridges (as well as async/sync bridges) successfully, so I don't mind checking your settings, particularly I am interested in the settings within the Module tab of the JMS receiver. I can then compare to mine if you'd like. Also if you can let me know what underlying queuing system in that target system (e.g. MQSeries?) that would be great.
Regards,
Keith

Page cannot be displayed error in Communication channel monitoring

Hi,
when i am trying to click on Communication channel monitoring from RWB it shows me the error " Page cannot be displayed".
I am testing this for the for the first time in QA environment.
But in development , CC monitoring works fine in the same Laptop.
I have checked the hosts file and it has the IP address and system name present in it.
i have checked in my collegues laptop and it opens there, but it doesn't open in my laptop.
we are using PI 7.0, windows XP and IE 7.0.
Could anyone help to solve this problem?
Thanks
JJ

I am able to open the communciation channel if i am using the path http://<full qualified host>:<http port>/mdt/channelmonitorservlet
This means that there is a problem in the host file....the changes are not getting reflected.....did you log-ff and then again login?
instead of the FQDN you can also open the page using the IP address of the server.
I am really sorry I am unable to give you points, since the Star icon is not displaying in the browser to award points
This may be because you did not mark the thread as a question
Regards,
Abhishek.

JMS sender communicaton channel error

Hi,
The JMS sender communication channel throws the following error in Communication Channel monitoring in RWB.
<b>Channel started but Inactive</b>
<b>"Channel removed; check whether channel was deleted or moved to another Adapter Engine"</b>
But the channel is active and a copy object of the same channel works succesfully.
Has anyone faced such an issue?
Thanks,
Ambili

Hi Abhishek,
Thanks for ur reply.
1. Already tried it, but still the same status.
2. Yes, i can see the channel in sxi_cache.
3. Tried this several times, same message.
The issue is just for this channel and as I mentioned before, a copy object of the same channel works perfectly fine.
Thanks,
Ambili
Edited by: Ambili Jose on Jan 19, 2010 7:30 AM

0 Channels foun in RWB

Similar Messages

Maybe you are looking for