0 DSP resource allocation failure after IOS upgrade

                   Hi all
i can't make and call after upgrade IOS to Version 15.3(3)M2
                           *DSP VOICE CHANNELS*
CURR STATE : (busy)inuse (b-out)busy out (bpend)busyout pending
LEGEND     : (bad)bad    (shut)shutdown (dpend)download pending
my router is Cisco 2901

I think there are more people... So I suggest to iPad2+3G user not to upgrade more than iOS5 :)
and more I am trying to solve the problem for a couple hours...unfortunetly, there is nothing solved yet.
I have restored from iTunes, with and without SIM... Just 1 second I see the my carrier than lost again
By the way to be sure about it, I have checked my and friend's SIM with iPhone 4 which is updated with
iOS 5.0.1 and all the SIM worked perfectly on phone...
I think we are not alone but we are the only having problem as iPad2 user...since there is no feedback
From others...

Similar Messages

Apple iPad 3. BT email not working. Cannot send emails from btconnect SMTP after iOS upgrade. This is the only difference I am aware of. Can anyone help me please.

BT email not working. Cannot send emails from btconnect SMTP after iOS upgrade. This is the only difference I am aware of. Apple iPad 3. Can anyone help me please.

All resolved at last
Deleted the SMTP setting
Recreated the SMTP using the same settings
Able to send emails now
No logic - as usual - just a bug!

I bought a Sandisk Connect Media Drive, downloaded the app from iTunes. Before iOS 8, movies played fine. After iOS upgrade I can no longer play movies downloaded from iTunes to the media drive. Anyone else have a similar issue?

I bought a Sandisk Connect Media Drive, downloaded the app from iTunes. Before iOS 8, movies played fine. After iOS upgrade I can no longer play movies downloaded from iTunes to the media drive. Anyone else have a similar issue?

I checked with SanDisk's own online support and they indicate that they have notified Apple of the issue.
According to SanDisk, the problem lies with Apple not having the iOS 8 version of the Safari browser having DRM decoding enabled that the Media Drive relies upon to decode and play iTunes DRM titles. Non DRM encoded videos will play in the browser.
DRM audio is not effected as this is handled by the native iOS music app.
As of the date of this post SanDisk have not been given a timeframe by Apple for this issue to be resolved.
I hope that Apple resolves this issue quickly as I have a large collection of DRM video titles on a 128Mb memory card installed in the Media Drive that I am unable to view.

IPAD Mini Locked after iOS upgrade, tried reset on iPAD did not work, plugged in and device not appearing in iTUNEs for reset/restore

PAD Mini Locked after iOS upgrade, tried reset on iPAD did not work, plugged in and device not appearing in iTUNEs for reset/restore. Just get an Apple Logo then a flashing blue screen as if it is caught booting up. This has happened twice before and iTunes restore fixed it. But this time device not appearing in iTunes.
Running iTunes for PC. But as stated restore has worked before! Any help greatly appreciated!!

Place the device in DFU mode and let iTunes restore the device to factory condition.

3G icon in the status bar got disappear after ios upgrade 8.1

3G icon in the status bar got disappear after ios upgrade 8.1

Nginear48 wrote:
Thanks for your quick response. I've tried everything you suggested and get only temporary fixes. Sometimes for a day or two, sometimes only until I use Safari for the first time. It's annoying and probably effects battery life between charges.
You would think that it must have some effect on the battery, but oddly enough, the update to iOS 8 actually helped my battery life, in spite of all of these hinky little issues that are taking place. In my experience, the activity icon is not affecting the battery in a negative way.
Another issue with IOS 8.1 that you may have seen is the loss of icon pictures on home pages. Again it seems to be Safari related, since app icons found in the App Store are not affected, only web based icons you personally put on home pages. I get what I call a test screen similar to what you used to get on old tv sets on every one of my personal icons.
I know exactly what you mean. I got that as well. On a few of them, when I opened the websites using the generic test screen icons and then closed them, they changed back to the way that they should look. For the ones that did not change, I recreated the home screen shortcuts and deleted the generic looking ones - the test screen icons.
And don't get me started on iBooks.
For the very limited use that I make of the iBooks app, i haven't noticed any problems, but I rarely use the app. I don't read books on the iPad other than a few user guides and if they are pdf guides, they reside in more reliable and feature rich pdf apps on my iOS device.
I wish that I had the fix for the spinning activity icon, but everything that I try, is temporary at best. IMO, this is the buggiest iOS update that I have seen, and I have been using iOS devices since iOS 3 on my first iPad. I realize that there are plenty of people that are not experiencing issues, but I have seen a number of weird things that I wish I could fix. None of my problems are major, but they are annoying.

No valid license found after IOS upgrade on C3750x switch

HI,
Two switches below are working fine as a stack with IOS c3750e-universalk9-mz.122-55.SE5.bin & ipbase license.
Switch#1 (Master, WS-C3750X-24P-S)
Switch#2 (Member, WS-C3750X-24P-S)
After IOS Upgrade to c3750e-universalk9-mz.150-2.SE7.bin, The stack was broken. Switch#2 didn’t recognise valid ipbase license with new IOS and came up with lanbase license instead. Therefore stack cannot be composed due to license mismatch between Switch#1 (ipbase) and switch#2(lanbase).
I’m wondering why Switch#2 didn’t recognise ipbase license with new IOS even though IPASE is running well with previous IOS.
Here is excerpt from “show version” with 15.x image on Switch#2.
License Level: lanbase
License Type: Default. No valid license found.
Next reload license Level: lanbase
Here is excerpt from “show version” with 12.x image on Switch Stack.
License Level: ipbase
License Type: Permanent
Next reload license Level: ipbase
Thanks
Jeong

Thanks guys,
I have fixed the issue by configuring 'license boot level ipbase' on the member switch#2. The switch recognised IPBASE license well and joined the stack successfully.

After ios upgrade to 7.0.4 i got power botton and no sim problem need help help

after ios upgrade to 7.0.4 i got power botton and no sim problem anyone having this problem?

Installing an iOS update does not add a physical button.
As for the "No SIM" message, try removing and reinserting the SIM or replacing the SIM.

POE 3560 Issue after IOS upgrade

Hello,
I having issue where 6 WLAN AP's not coming back uo after reboot and IOS upgrade of 3560 POE swtiches - . Prior to changes here most if not all ALL the 23 Aps were mainly on one switch, Now after these changes they are now spread over three switches ( 3560's) - with 17 coming back on line
I am sure its not the power limitation of the switch(s) as the one switch I am TS at present had a fairly large allocation of the aps attached prior to ios upgrade and reload. and the available power value now showing is applicable.for 8 AP's
I have tried various TS steps to try and bring them back up - A couple of things I would like to try but I am restricted to do so is to check the APS physically or downgrade the ios!
Any input on this matter would be truly appreciated.- (attached is the log buffer debug)
res
Paul

c3560-ipbase-mz.122-25.SEE2.bin
You upgraded the IOS to the switch? I shudder at the thought of what old version did you upgrade FROM.
Available:370.0(w) Used:110.4(w) Remaining:259.6(w)
You've got more than enough PoE left.
Only two things comes to my mind:
1. Cable issue - Unfortunately, the 3560 is a non-GigabitEthernet and this particular sub-model does NOT support TDR.
2. Hardware failure - Read THIS.

Photos not going to pc photo stream after ios upgrade

After spending 2.5 hours with Apple phone representative on 10-31-13, I still do not have an answer as to why once I completed the upgrade to ios 7, my photo stream on my pc no longer contains any photos taken after the upgrade. I had to send Apple logs and their engineers are supposed to call me back.
I am getting this weird "desktop icon" in place of photos. I had been using i cloud for 18 months prior to upgrade and all had been working fine. They had me reset phone, computer restrted 10 times and upgrade i cloud, reset all settings for photostream and ios settings...still no photos uploaded to my pc.
Very frustrated and just wondering if anyone else is having similar issues.
Thanks.

Hey Shivas7,
Thanks for the question. I understand you are experiencing issues with Photo Stream. The following resource may help to resolve your issue:
iCloud: My Photo Stream troubleshooting
http://support.apple.com/kb/TS3989
Thanks,
Matt M.

Can't sync iPad after iOS upgrade to7.0.2 - repeated authorisation prompt - using admin profile, file SC info does not exist

Hello,
After I upgraded to iOS 7.0.2 I can't sync iPad mini with PC (on Windows XP). I keep getting the folowing message: "The iPad could not be synced because this computer is no longer authorized for purchase items on this iPad". I tried everything:
1) De-authorizing and rebooting (about 100 times);
2) De-installing and reinstalling itunes;
3) Deactivating the firewall;
4) Run Diagnostics (result - all works fine including sync);
5) Tried to look for the "SC info" directory or file everyone is referring to in the Computer (Hidden files) of the iTunes directory - nothing;
6) Ticking and unticking the |Sync over Wi-Fi" option;
7) Changing backup from iCloud to this Computer and back.
I am using the admin account on my PC - doesn't help.
I cannot sync anything at all.
BTW - on the PC and on the iPad - everything that is there plays OK. I can get stuff from iStore both from iPad and from the PC - but I can't sync the two.
It looks like an iOS 7 bug to me - any ideas or advice?
Thanks.
D.

No I have tried multiple connections, at home, at work, and even at my church but to no avail. For example I have recently purchased a CD from Itunes using my computer, but my ipad will only play it from the cloud. I've tried to download straight from my Ipad and that too does not work. When ever I try to plug the Ipad into the computer a window pops up and says that the sync has failed. If I try to drag the file to the Ipad it will say it's loading than just quit before it transfers. hmmm. I hope they get this bug fixed some. would really like to have that CD to isten to on the go. Another issue I am no having is the apps are having trouble updating. I have tried to turn off auto update and do it manually and that too is failing.

IPad 2 Does not retain names and passwords after iOS-upgrade to 8.0.2

After the last series of iOS upgrades (device current status is 8.0.2 , latest available) the iPad2-16G WIFI version, does not retain any names and passwords anymore. Function (Safari) is enabled.
Re-booting, clearing memory etc did not solve anything).
Is this a known version 8.0 bug or .......?

Make sure "Private Browsing" is disabled.

AP350 won't boot after IOS upgrade

I have an AP350 and after I upgraded the IOS to 12.2.15-JA it won't boot. In monitor mode it tells me there are no bootable images available. I see the new image there. I was having issues with the authentication on this box. This was the reason to upgrade the box to begin with. Now I have more problems here. If anyone can help please I could use it. The old directory where 12.2.13-JA1 was in is not there and the new image is not in a directory either if that helps.

Please read the attachment. It shows you how to recover IOS from bootstrap. Specifically, please go to "Using the MODE button" in "Reloading the Access Point Image"
As a side note, you cannot use HTTP interface to upgrade IOS software starting 12.2(15)JA. Below is from release notes:
TFTP Required to Upgrade 1200 Series Access Points to this Release
Software upgrades fail when you use the web-browser interface to install Cisco IOS Release 12.2(15)JA on 1200 series access points. The image size exceeds the access point's 4-MB restriction for software upgrades. Use TFTP to upgrade your 1200 series access point to this release. For complete instructions on using TFTP to upgrade access point software, see the "Working with Software Images" section on page 20-18 in the Cisco IOS Software Configuration Guide for Cisco Aironet Access Points.

Trying to reinstall apps on ipad after ios upgrade but not downloading.

Just upgraded both my ipad 1 and iphone 4 to iOs 5 and both had all the apps deleted after the upgrade. I'm manually reinstalling the apps but while the apps download and install fine on my iphone they are hung up in the "waiting" mode on my ipad. Checked and the ipad is connected to the internet since I can surf the web still on the ipad. Anyone else having issues like this?

Change to the correct store this way.
Settings>iTunes and App Stores>Apple ID
Tap your ID
Tap View Apple ID
Enter your password
Go to country/region in the popup window to change the store.
Or swipe down to he bottom of the App Store in the featured tab and tap on your Apple ID. Sign out of your ID and then sign in again and see if that changes the store for you.

Shortcuts for messages don't work after iOS upgrade

After having upgraded to the most recent iOS, my shortcuts don't work in messages and mails anymore. Has anyone else had the same experience?

Well, it's telling you that the datset doesn't exist. From the help in 4.7:
OPEN DATASET
Addition 1a
... FOR INPUT
Effect
OPEN ... FOR INPUT opens the file in read mode.
If the file does not exist, OPEN ... FOR INPUT fails with Return Code SY-SUBRC = 8.
Note
If OPEN DATASET is not executed in a Unicode program and if the user has write authorization for the file, the file is opened in read and write mode. Otherwise, it is only opened in read mode.
Rob

No blue tooth connection after ios upgrade

My Iphone 4s does not find any bluetooth devices after upgrading from ios6 to ios7.
I've tried reseting all configurations for network connections and all configurations in the phone without success.
What is the next step?

The iPhone has previously been paired with the device. But neither the iPhone or the connecting device (car stereo) detect the other device after this upgrade. I have removed all previously paired devices from the car stereo and other iPhones detect the car stereo.
It's like the iPhone bluetooth doesn't start at all.

0 DSP resource allocation failure after IOS upgrade

Similar Messages

Maybe you are looking for