0 idocs generated for msg type cosmas

Hi everyone..
please help out with this idoc issue
I'm trying to send data with msg type COSMAS from 800 to 810 using BD16 as follows:
it just says 0 idocs generated.
I have again gone back and checked my customizations but can't figure it out.
the steps i have done are:
create and assign logical systems
open rfc connections from both c800 and c810
create model view and assign msg type in bd64 in c800.
create partner profiles in both c800 and c810.
open port from c800 .. .DO i have to open a port from c810 as well??
Some doubts I have :
do i have to do :
"Generate the partner profiles by selecting the navigation path from the main menu, Environment --> Generate Partner profiles"
from BD64 after i create the model view and add msg type COSMAS.
regards,
allwyn

HI
no, i have not done anything relating to bd64 in c810 ..that wasn't mentioned in the notes I am following .. Do I have to repeat the same steps like I did in c800?

Similar Messages

IDOC reduction for MSG type MATMAS

HI all,
i have a requirement where clients need only some standard segments and some particulars staructure.We are using MATMAS as a message type and MATMAS05 as a basic type.Basically it leads us for IDOC reduction. Can someone pls help me out for getting this requirement.
Rgds,
Raghav
Edited by: raghav on Jun 9, 2009 12:28 PM

Hi,
Launch the BD53 transaction (IDoc Reduction Maintenance: Initial Screen). In the Reduced message type field, type the value ZVISTAPM_REDUCED, then press the Create button. In the popup window which appears, type in the Message type reference field the value MATMAS.
Validate.
In the next popup window, type a short description for the new reduced message type.
Validate.
In the following window, select the segments and the fields needed for the new reduced message type.
Save.
KR Jaideep,

Usage of ALE - idocs generated for BAPIs

Hi
I need to use - the std idocs generated for BUS2032 object - CREATEFROMDAT2 method to store the BAPI call ( BAPI_SALESORDER_CREATEFROMDAT2 )data for those sales orders that could not be created.
If I want to use the SAP delivered BAPI ( BAPI_SALESORDER_CREATEFROMDAT2 ) to call as it within an ABAP program - and then if the call did not go through - then log the data for BAPI into the corresponding idoc with the message type SALESORDER_CREATEFROMDAT2 ( idoc type SALESORDER_CREATEFROMDAT202 ) do I need to move the values from the BAPI structures to the idoc segments programatically ? Or since the idoc is linked to the BAPI - by definition, is there an implicit way to move data to the corresponding idoc segments and save the idoc .
Can anyone out there give me a code sample to do - what I have asked above ?

Hi,
I guess you can use function module ALE_SALESORDER_CREATEFROMDAT2 to create idoc from bapi data. You can pass the entire data in internal tables that you are passing to BAPI into above mentioned function module and then it will create an Idoc for the same. Also populate the receivers in the internal table receiver.
KR Jaideep,

How to find the number of idocs generated for a customer on the basis of his purchase order in a day ?

How to find the number of idocs generated for a customer on the basis of his purchase order in a day ?

Dear Friends,
I am absolutely agree with your answer .
But my question is,
Lets say.....
One customer sending X number of purchase orders in a day , so how many IDocs generated on that specific day for that specific customer .
So, Question is , How can we find the no of sales orders(IDocs) generated for the customers on the specific day ?
Hope you all understood my requirement .
Thanks & Regards,
Aditya

1 request Idocs created for message type MATMAS

Hi Experts
I have done necessary config.
I have attempted BD10 and BD11.
I have got message that "1 request Idocs created for message type MATMAS"
But iam unable to find the material in target system.
Please suggest what need to be done.
regards
ramSiva

Marias,
And in PI, after having changed the password (why not), have you unlock this user account ? in SU01 of PI, you have a lock button.
if you did it, and changed also the password, as explained, you have perhaps another (or several) program like a RFC destination which uses another password, and so after some exchanges... with a bad/old password, you have your message "too many...", and then the user is again locked...
If you change the password in PI, you should change it in all application which uses this user. I hope you have not the same user from ECC to PI, than from a third-party to PI...
that's why: the use of such technical users have to be referenced in a doc. By this way, if password has to modifiy, we know where we have to update it (mainly in different RFC destination).
Mickael
Edited by: Mickael Huchet on Dec 5, 2011 5:33 PM

No Communication IDOC generating for MATMAS --- Urgent

Hi,
I have two systems in the Landscape; one is DA1 and other is DA3. Both systems are exactly identical.
When I am triggering idoc of message type MATMAS from bd10 in DA1 systems, it successfully generating MATMAS idoc and I am able to see that idoc in we02 but when I am triggering MATMAS idoc in DA3 system; it is generating Master IDOC but it is not generating Communication idoc for Message type MATMAS and in we02 as well I am not able to see any such idoc.
Both the Systems are exactly same and I have checked ALE configurations in both the systems, they are same.
Can anyone suggest, what could be the problem.
Regards,
Varun

hi,
As Bineah mentioned check the distribution model, distribute it and generate partner profile. verify all the configurations once again i hope it will do.
if any queries let me know .
~linganna

Sendind idoc tcode foe msg type WVINVE and WPUUMS

Dear All,
What is the tcode for sending phy inventory data through IDOC message typy WVINVE, and also for message type WPUUMS POS interface: Upload sales data (Compressed)
Ex: BD10 for sending material.
Thanks and regards,
Arun.

Hi,
Wpuums is inbound IDOC so you can crete this IDOC with the help of We19
and for testing purpoase u can use WPUK tcode
Thanks
Amit Shivhare

Error: 0 communication IDoc(s) generated for message type

what is this??..wher i need to screw this error.

Hi Priyank,
Just cross check with this weblog:
ALE configuration for pushing idocs from SAP to XI
Regards,
Sachin

Idoc generation for message types

Hi All,
regarding IDOC generation....
how do we activate the message type so that every time the application data which is created or changed or deleted generates the idoc and send it to other system. If iam not using Chnage pointers technique then i would not be activating the message type in BD50. In such case ie if the message type is not present in BD50 list and if change pointers is not used to transfer that message type . How do we genrate the idoc for such message types.
Thanks
Avinash

Hi,
For ur scenario u need to go for change pointers method only.U have other options like distributing master data and transactional data..But i don't think anything otherthan change pointers is useful.
Regards,
Nagaraj

Schedule Lines not generated for MRP Type PD

HI All,
I have created Schduling Agreement, maintained Source List with MRP Relevant - 2 option and maintained Vendor as Fix, maintained info record.
I have created a material with MRP type as PD and lot size as EX, and strategy group as MTS. Now when i enter requirement through MD61 and do MRP Run through MD02, system is generating PR instead of Del Schdule line inspite of schduling agreement.
But If i change MRP type to VB and maintain reorder point and maintain min lot size, then system generates Del Schdule lines for the same material.
What could be the reason. I want delivery schedules based on MRP Type PD.
Where I am wrong in MRP Views or in any cutomization. It seems that purchasing part is fine since it creats scudles line so no problem in SA or in Source List.
Please help
Regards,
Vikas

I have created Schduling Agreement, maintained Source List with MRP Relevant - 2 option and maintained Vendor as Fix, maintained info record.
I have created a material with MRP type as PD and lot size as EX, and strategy group as MTS. Now when i enter requirement through MD61 and do MRP Run through MD02, system is generating PR instead of Del Schdule line inspite of schduling agreement.
But If i change MRP type to VB and maintain reorder point and maintain min lot size, then system generates Del Schdule lines for the same material.
What could be the reason. I want delivery schedules based on MRP Type PD.
Where I am wrong in MRP Views or in any cutomization. It seems that purchasing part is fine since it creats scudles line so no problem in SA or in Source List.
Hi Vikas,
After being thru with your query,i would like to reply your ultimate question"I want delivery schedules based on MRP Type PD"
Simple answer:put parameter 'delivery schedule line' as '3'(schedule lines in opening period) without simulation mode.
Please make sure you don't make any change with previous settings(custom)
please get it done and revert.
Regards
Chandra

Accounting documents not getting generated for mvt. type 221 Q

Hi friends,
When goods are issued for consumption for project accounting documents are not getting generated.
I have tried with mvt. type 412 Q, 211 Q,
by mvt type 412 Q, the stock is transfered to project stock, it shows the stock of material in project stock, by movement type 211 Q the project stock gets consumed. So at the time of consumption of consumption account should hit and relevent accounting document should get generated. this is not happenning.
When i check material document and check for accounting document, message flashses that movement is not rrelevent for accounting.
Can any one throw more light on this?
Thanks and regards
SAP MM

Hi,
Please check in PO item details Delivery tab. In that GR Non-valuated checkbox might be checked.Generally for account assignment category asset it is ticked.
If you tick GR non-valuated check box then at the time of GR accounting document will not be created.Accounting document will be created only at the time of IR.
or
Have you mantained Chart of accounts.
have you mantained Valuation area settings
Transaction event key
Valuation class settings.
Check your material master data in accounting view have mantained Valuation class.
Check your back ground settings OMWN.

Problem using IDOC_INPUT_DELVRY in ship.conf for msg type SHPCON

Hi Experts,
We are confirming the picked quantity from warehouse for the outbound delivery using the EDI IDOC_INPUT_DELVRY as shipping confirmation using message type SHPCON and process code DELV.
           Problem is that this process is checking the determination of the output type LAVA maintained in NACE before the actual post goods issue take place. since the SAP itself has the requirement check for goods issue status 'C' ( Complete check status ), this output type is not picked while doing the automatic post goods issue using EDI since at that time goods issue status is 'A'. In other words, goods issue has not taken place.
       But when we did manually using VL02N for confirmed picked quantity and did the post goods issue manually it is determining the output type LAVA since while checking the requirement in LAVA has goods issue status 'C' ( Completed ).
In simple words, while doing manually the output type LAVA is determined but while doing
automatic post goods issue using EDI output type LAVA is not determined.
This is very urgent. Please help with this?.
Thanks,
suresh

Hello Mohanaselvan,
Thank you for this info. Definitely making some progress now.
Can you advise some of the necessary iDOC DELVRY03 data elements necessary to transmit the sales order data?
I am receiving the 51 status error message:
"Data of Preceding Document was not transmitted" and
"Essential transfer parameters are missing"
I tried referencing the Sales Order in few places, but I don't seem to have it correct:
E1EDL20-VBELN = Sales Order (Instead of Delivery Number)
AT ITEM LEVEL
E1EDL43-QUALF=C
E1EDL43-BELNR=Sales Order
E1EDL43-POSNR=Sales Order Item Number
Regards,
Sandy

Idoc generated for creation of sales order

Hi all,
In my project we have two different boxes-I and B.When a purchase order is created in I Box an idoc is triggered which goes to the B Box and creates a sales order.I want to do some changes in E1EDKA1 and E1EDPA1 segment in the idoc in I Box so that when it goes to B Box it will show the changed one.For example if there is EN in E1EDKA1 and E1EDPA1 segment then in B Box it will be appeared as ZA.I need to know that for this change I have to do the coding changes in which USER EXIT?The function module which is triggered during the sales order creation in B Box is IDOC_INPUT_ORDERS.
Thanks in advance
Raj

Hi Raj,
go to se37..
enter the function module and after each segement append there is a customer exit and badi is available to add you custom code..
in the user exit read the segement and modify the segemnt data..
these are the below exits available for the Orders
ORDCHG I VEDB0001 Sales Ord. Change
ORDERS I VEDA0001 Sales Orders "this is the user exit for you to code..
ORDRSP I MM06E001 Order Response for
Purchase Order
search-- CALL CUSTOMER-FUNCTION '011'--Fm--EXIT_SAPLVEDA_011--include--INCLUDE ZXVEDU13.
Regards,
Prabhudas

PR not generating for MRP type VB

hi all,
i have bill of material wich contain some raw material. for this raw material i have maintained MRP type VB , along with reorder point and safety stock in material master
but after MRP run, i am not gettting requirenemnt of raw material, if i changed the MRP type to PD , then requirenment (PR) coming for raw material. MRP control parameter are NETCH,1,3,1,1,1
so why i m not geting requirenment with MRP type VB.

hi,
Try in the below way:
Make the Create Preq. indicator as 2 in the planning file...make the delievery schedule as 1(ie. no schedule line)( this would be one of the mistake as you specified as 3)...
Then maintain the source list with the MRP indicator as 1, make the vendor as FIX, Define proper valid dates in it and save...
Now try and revert back...
Hope it helps..
Regards
Priyanka.P

IDOC Exit for Basic Type PORDCR101

I had extended the idoc type PORDCR101( Create Purchase Order ) and added the new segment under E1BPMEPOITEM .
Now i want to find the exit which will help me in populating the added segment fields when the IDOC is posted .
Any sort of help is appreciated .
Regards,
Praveen.

Hello,
The message PORDCR will use FM IDOC_INPUT_PORDCR and further processing is done using a BAPI: BAPI_PO_CREATE.
Enhancement SAPLMEWP deals with the Exits related to the BAPI.
Hope the above point helps you.
Best Regards, Murugesh AS

0 idocs generated for msg type cosmas

Similar Messages

Maybe you are looking for