0 ppm on final cut volume meter?
Hi,
I received some audio suggestions from our broadcaster and they said the peak should be up to 0 ppm.
1) how much is 0 ppm on the final cut studio pro 3 - volume meter (the dbfs one)?
2) how much is 0 ppm to db also?
Thanks,
aemi
aemi wrote:
Hi,
I received some audio suggestions from our broadcaster...
Suggestions?
You want very accurate specifications, not suggestions.
Tolerances will vary from one broadcaster to the other, most will say around -18dfbs for shows. There may be some leeway for commercials because no advertiser wants their commercial to be quieter than the others.
They might also specify average and minimum audio levels.
0 ppm = 0dB Analog.
Note that you should never ever go over 0dfbs because that is the absolute limit in digital audio. There is no more headroom, unlike analog.
A good spec sheet will detail analog and digital levels exactly . Stick to it.
Similar Messages
-
Final Cut x exporting different volumes
I have multiple nested clips in a single project. For some reason, when I export them individually through compressor (I'm using the same setting for each) They export at different volume levels. They sound and look the same in Final Cut so I have to check every single one once they've been exported and it's a nightmare. Anyone have any ideas? I'm using FCPX 10.1.1 and the latest version of compressor on Mavericks.
No ideas, but export one of the problem clips as a master file. Bring it into Compresssor and after processing, check the audio. Is it also a problem with that workflow?
Russ -
2 Final Cut / xRaid / "Networking"
I have inherited an xRaid network. Only an xRaid and 2 G5's w/ Final Cut. Current configuration: 1 fibre cable connected from Fibre card on G5 #1 to Lower Port on xRaid. Same set up on G5 #2 connected to Upper Port on xRaid.
Is there a way to connect both sides of the xRaid together? If not, I need suggestions about what kind of Switch / Hub solution to connect BOTH G5s to Both sides of the xRaid.
I'm hitting a severe bottle neck when trying to access video data that was digitized on the "other" computer's xRaid. I have to share the mounted drive through the 10/100 network.
Other questions: What MODE is the fibre channel of the xRaid? What do you call the CONNECTORS on the end of the cables that came with the system?
Mac OS X (10.4)I use MetaSAN and like it.
It is perfect for a small 2 edit bay setup. It is $1K per machine, but you don't need to have a dedicated MetaData Controller. It performs very well and can be easily disabled for normal OSX disk maintance. Unlike xSAN, MetaSAN is very easy to use and works without as much risk to your drive's filesystem.
Check eBay for a $700 Brocade 3200 fibre switch. These are affordable now that many copanies are only buying 4Gb fibre hardware. They are very nice and perfect for a small SAN like you need. Also get some LC to LC fibre cables and a bunch of SFP adapters for these if you plan on running the cables more than a few feet from the xServe RAID. I got a dozen 30 meter lc cables and another dozen SFP trancievers on ebay for $150.
Total cost of this upgrade would be in the $3K range. That's cheap for a SAN.
The other alternative is to look at an iSCSI solution which shares your volume out to the other G5 over ethernet, but using iSCSI protocol (instead of the lower latency Appletalk protocol). iSCSI is the next big thing for budget oriented SAN's and you would be wise to consider it if you don't have the budget to work in the Fibre world.
I would RAID 50 both channels of the RAID into one megadrive using OSX Disk Utility, then install MetaSAN one machine at at time. Just remember to never let any computer on to your Fibre switch (unless you know how to zone it) without first installing MetaSAN on that machine. Since MetaSAN uses plain old HFS plus format on the disk, it will mount locally to any machine connected to the fibre switch. Since xSAN uses it's own, odd disk format, there is less danger of things getting messed up this way.
good luck. -
Final Cut Studio 2: Requirements and Recommendations
Hello Final Cut Studio 2 Experts,
I'm considering purchasing Final Cut Studi 2, and to make sure that I'll benefit from the full range of specific application (FCS/motion/color...) and I'd like to ask few questions (5 main points) regarding requirements and recommendations. So, please be prepared for much reading as I am not an expert on the matter. I like to know if my computer accepts any further hardware parts highly recommended and if I can purchase and install them myself. And yes, you should also know that I intend to use a Panasonic multi-format (HD/SD) camera for capturing and exporting videos.
N.B. Please note that the full list of my Hardware contents appear at the bottom of this text.
THANKS IN ADVANCE for your expert advise!
So, here we go:
Application-Specific Requirements
Final Cut Studio
Capturing HD resolution video using the ProRes 422 format requires a Mac Pro with an Intel Xeon processor or a G5 Quad computer and a qualified third-party capture card.
1) Do I need an Intel Xeon processor? If yes, can I purchase and install the component by myself (like RAM)?
Motion
The standard graphics card in any Mac Pro, MacBook Pro, iMac with Intel Core Duo, Power Mac G5, or iMac G5; 1.25GHz or faster PowerBook G4; or 1.25GHz or faster flat-panel iMac:
ATI Radeon 9800, 9700 Pro, 9600 XT, or 9600 Pro
ATI Mobility Radeon 9700 or 9600
NVIDIA GeForce 7600 GT, 7300 GT, 6600, 6600 LE, FX Go5200, or FX 5200 Ultra
For 16- and 32-bit rendering: a graphics card with at least 128MB of VRAM
2) Do I need one of the ATI Radeon 9800, 9700... or ATI Mobility Radeon? Why does my Hardware contents say ATI Radeon 9600, and not ATI Mobility Radeon 9600, is there a difference?
Color
The standard graphics card in any Mac Pro, 17-inch MacBook Pro, 24-inch iMac with Intel Core Duo, or 2.5GHz or faster Power Mac G5 Quad:
ATI Mobility Radeon X1600
ATI Radeon X1600
NVIDIA GeForce 7800 GT, 7600 GT, 7300 GT, 6600, or Quadro FX 4500
A display with 1680-by-1050 resolution or higher
A three-button mouse for full functionality
3) Do I need and ATI Mobility Radeon X1600 or ATI Radeon X1600?
DVD Studio Pro
For playback of DVD Studio Pro 4-authored HD DVDs: a Macintosh computer with a PowerPC G5 or Intel Core Duo processor
For writing finished projects to disc: an Apple SuperDrive or other DVD recorder
For writing finished projects to a double-layer disc: a double-layer-compatible recorder and double-layer media
For transporting HD projects to a replicator: an external drive or Internet transfer of the project’s disk image
For transporting SD projects that contain copy-protection or dual-layer features to a replicator: a DLT drive, external drive, or Internet transfer of the project’s disk image
4) Do I have an Intel Core Duo processor? Do I need an Apple SuperDrive?
What is a "replicator"?
Application-Specific Recommendations
Motion
One of the following graphics cards is highly recommended:
ATI Radeon X1900 XT, X850 XT, X800 XT, or X1600
NVIDIA GeForce 7800 GT, 6800 Ultra DDL, 6800 GT DDL, or Quadro FX 4500
For 32-bit rendering: a graphics card with 256MB of VRAM or more
Color
The following graphics card is highly recommended:
ATI Radeon X1900 XT
Dual displays with 1920-by-1200 or higher resolution
5) Do I have one of the highly recommended cards ATI Radeon X1900 XT etc...? How do I get it and can I install it myself?
My Power Mac G5 HARDWARE CONTENTS:
Hardware Overview:
Machine Name: Power Mac G5
Machine Model: PowerMac7,3
CPU Type: PowerPC G5 (3.0)
Number Of CPUs: 2
CPU Speed: 2.3 GHz
L2 Cache (per CPU): 512 KB
Memory: 4.5 GB
Bus Speed: 1.15 GHz
Boot ROM Version: 5.2.4f1
Serial Number: G85167AGRU3
ATA Bus:
SONY DVD RW DW-Q28A:
Model: SONY DVD RW DW-Q28A
Revision: KAS7
Serial Number:
Detachable Drive: No
Protocol: ATAPI
Unit Number: 0
Socket Type: Internal
SONY DVD RW DW-Q28A:
Model: SONY DVD RW DW-Q28A
Revision: KAS7
Serial Number:
Detachable Drive: No
Protocol: ATAPI
Unit Number: 0
Socket Type: Internal
Built In Sound Card:
Devices:
Texas Instruments TAS3004:
Inputs and Outputs:
Line Level Input:
Controls: Left, Right
Playthrough: No
PluginID: TAS
Headphones:
Controls: Mute, Left, Right
PluginID: TAS
Internal Speakers:
Controls: Mute, Master
PluginID: TAS
Line Level Output:
Controls: Mute, Left, Right
PluginID: TAS
Crystal Semiconductor CS84xx:
Inputs and Outputs:
S/PDIF Digital Input:
Controls: Mute
Playthrough: No
PluginID: Topaz
S/PDIF Digital Output:
Controls: Mute
PluginID: Topaz
Formats:
PCM 16:
Bit Depth: 16
Bit Width: 16
Channels: 2
Mixable: Yes
Sample Rates: 32 KHz, 44.1 KHz, 48 KHz
PCM 24:
Bit Depth: 24
Bit Width: 32
Channels: 2
Mixable: Yes
Sample Rates: 32 KHz, 44.1 KHz, 48 KHz
AC3 16:
Bit Depth: 16
Bit Width: 16
Channels: 2
Mixable: No
Sample Rates: 32 KHz, 44.1 KHz, 48 KHz
Bluetooth: No Information Found.
SONY DVD RW DW-Q28A:
Firmware Revision: KAS7
Interconnect: ATAPI
Burn Support: Yes (Apple Shipped/Supported)
Cache: 2048 KB
Reads DVD: Yes
CD-Write: -R, -RW
DVD-Write: -R, -RW, +R, +RW, +R DL
Burn Underrun Protection CD: Yes
Burn Underrun Protection DVD: Yes
Write Strategies: CD-TAO, CD-SAO, CD-Raw, DVD-DAO
Media: No
Fibre Channel: No Information Found.
FireWire Bus:
Maximum Speed: Up to 800 Mb/sec
ATI Radeon 9600:
Chipset Model: ATY,RV351
Type: Display
Bus: AGP
Slot: SLOT-1
VRAM (Total): 128 MB
Vendor: ATI (0x1002)
Device ID: 0x4150
Revision ID: 0x0000
ROM Revision: 113-A58504-113
Displays:
Cinema HD Display:
Display Type: LCD
Resolution: 1920 x 1200
Depth: 32-bit Color
Core Image: Supported
Main Display: Yes
Mirror: Off
Online: Yes
Quartz Extreme: Supported
Rotation: Supported
Display:
Status: No display connected
DIMM0/J11:
Size: 256 MB
Type: DDR SDRAM
Speed: PC3200U-30330
Status: OK
DIMM1/J12:
Size: 256 MB
Type: DDR SDRAM
Speed: PC3200U-30330
Status: OK
DIMM2/J13:
Size: 1 GB
Type: DDR SDRAM
Speed: PC3200U-30330
Status: OK
DIMM3/J14:
Size: 1 GB
Type: DDR SDRAM
Speed: PC3200U-30330
Status: OK
DIMM4/J41:
Size: 1 GB
Type: DDR SDRAM
Speed: PC3200U-30330
Status: OK
DIMM5/J42:
Size: 1 GB
Type: DDR SDRAM
Speed: PC3200U-30330
Status: OK
DIMM6/J43:
Size: Empty
Type: Empty
Speed: Empty
Status: Empty
DIMM7/J44:
Size: Empty
Type: Empty
Speed: Empty
Status: Empty
PC Cards: No Information Found.
PCI Cards: No Information Found.
Parallel SCSI: No Information Found.
System Power Settings:
AC Power:
System Sleep Timer (Minutes): 0
Disk Sleep Timer (Minutes): 0
Display Sleep Timer (Minutes): 0
Dynamic Power Step: No
Reduce Processor Speed: No
Sleep On Power Button: Yes
Automatic Restart On Power Loss: No
Wake On AC Change: No
Wake On LAN: No
Wake On Modem Ring: No
Adobe PDF 7.0:
Status: Idle
Print Server: Local
Driver Version: 10.4
Default: No
URI: pdf700://distiller/
PPD: Adobe PDF 3016.102
PPD File Version: 1.0
PostScript Version: (3016.102) 0
hp LaserJet 1012:
Status: Idle
Print Server: Local
Driver Version: 1.4.5
Default: Yes
URI: usb://Hewlett-Packard/hp LaserJet 1012?serial=00CNFB638356
PPD: hp LaserJet 1012
PPD File Version: 1.0
PostScript Version: (3011.104) 0
Serial-ATA Bus:
Maxtor 6B250S0:
Capacity: 233.76 GB
Model: Maxtor 6B250S0
Revision: BANC1E50
Serial Number: B61QB0RH
Removable Media: No
Detachable Drive: No
BSD Name: disk1
Protocol: ata
Unit Number: 0
Socket Type: Serial-ATA
Bay Name: "A (upper)"
OS9 Drivers: No
S.M.A.R.T. status: Verified
Volumes:
Macintosh HD:
Capacity: 233.64 GB
Available: 50.02 GB
Writable: Yes
File System: Journaled HFS+
BSD Name: disk1s3
Mount Point: /
Maxtor 6B250S0:
Capacity: 233.76 GB
Model: Maxtor 6B250S0
Revision: BANC1E50
Serial Number: B61QB0RH
Removable Media: No
Detachable Drive: No
BSD Name: disk1
Protocol: ata
Unit Number: 0
Socket Type: Serial-ATA
Bay Name: "A (upper)"
OS9 Drivers: No
S.M.A.R.T. status: Verified
Volumes:
Macintosh HD:
Capacity: 233.64 GB
Available: 50.02 GB
Writable: Yes
File System: Journaled HFS+
BSD Name: disk1s3
Mount Point: /
Serial-ATA Bus:
Maxtor 7L300S0:
Capacity: 279.48 GB
Model: Maxtor 7L300S0
Revision: BANC1E00
Serial Number: L602X73H
Removable Media: No
Detachable Drive: No
BSD Name: disk0
Protocol: ata
Unit Number: 0
Socket Type: Serial-ATA
Bay Name: "B (lower)"
OS9 Drivers: No
S.M.A.R.T. status: Verified
Volumes:
Primo Volume:
Capacity: 279.36 GB
Available: 154.23 GB
Writable: Yes
File System: HFS+
BSD Name: disk0s3
Mount Point: /Volumes/Primo Volume
Maxtor 7L300S0:
Capacity: 279.48 GB
Model: Maxtor 7L300S0
Revision: BANC1E00
Serial Number: L602X73H
Removable Media: No
Detachable Drive: No
BSD Name: disk0
Protocol: ata
Unit Number: 0
Socket Type: Serial-ATA
Bay Name: "B (lower)"
OS9 Drivers: No
S.M.A.R.T. status: Verified
Volumes:
Primo Volume:
Capacity: 279.36 GB
Available: 154.23 GB
Writable: Yes
File System: HFS+
BSD Name: disk0s3
Mount Point: /Volumes/Primo Volume
USB Bus:
Host Controller Location: Built In USB
Host Controller Driver: AppleUSBOHCI
PCI Device ID: 0x0035
PCI Revision ID: 0x0043
PCI Vendor ID: 0x1033
Bus Number: 0x2b
Hub in Apple Pro Keyboard:
Version: 4.10
Bus Power (mA): 500
Speed: Up to 12 Mb/sec
Manufacturer: Mitsumi Electric
Product ID: 0x1003
Vendor ID: 0x05ac (Apple Computer, Inc.)
Apple Optical USB Mouse:
Version: 3.40
Bus Power (mA): 100
Speed: Up to 1.5 Mb/sec
Manufacturer: Logitech
Product ID: 0x0307
Vendor ID: 0x05ac (Apple Computer, Inc.)
Apple Pro Keyboard:
Version: 4.10
Bus Power (mA): 250
Speed: Up to 12 Mb/sec
Manufacturer: Mitsumi Electric
Product ID: 0x020b
Vendor ID: 0x05ac (Apple Computer, Inc.)
Hub in Apple Pro Keyboard:
Version: 4.10
Bus Power (mA): 500
Speed: Up to 12 Mb/sec
Manufacturer: Mitsumi Electric
Product ID: 0x1003
Vendor ID: 0x05ac (Apple Computer, Inc.)
Apple Optical USB Mouse:
Version: 3.40
Bus Power (mA): 100
Speed: Up to 1.5 Mb/sec
Manufacturer: Logitech
Product ID: 0x0307
Vendor ID: 0x05ac (Apple Computer, Inc.)
Apple Pro Keyboard:
Version: 4.10
Bus Power (mA): 250
Speed: Up to 12 Mb/sec
Manufacturer: Mitsumi Electric
Product ID: 0x020b
Vendor ID: 0x05ac (Apple Computer, Inc.)
Apple Optical USB Mouse:
Version: 3.40
Bus Power (mA): 100
Speed: Up to 1.5 Mb/sec
Manufacturer: Logitech
Product ID: 0x0307
Vendor ID: 0x05ac (Apple Computer, Inc.)
Apple Pro Keyboard:
Version: 4.10
Bus Power (mA): 250
Speed: Up to 12 Mb/sec
Manufacturer: Mitsumi Electric
Product ID: 0x020b
Vendor ID: 0x05ac (Apple Computer, Inc.)
USB Bus:
Host Controller Location: Built In USB
Host Controller Driver: AppleUSBOHCI
PCI Device ID: 0x0035
PCI Revision ID: 0x0043
PCI Vendor ID: 0x1033
Bus Number: 0x0b
hp LaserJet 1012:
Version: 1.00
Bus Power (mA): 500
Speed: Up to 12 Mb/sec
Manufacturer: Hewlett-Packard
Product ID: 0x0d17
Serial Number: 00CNFB638356
Vendor ID: 0x03f0
hp LaserJet 1012:
Version: 1.00
Bus Power (mA): 500
Speed: Up to 12 Mb/sec
Manufacturer: Hewlett-Packard
Product ID: 0x0d17
Serial Number: 00CNFB638356
Vendor ID: 0x03f0
USB Bus:
Host Controller Location: Built In USB
Host Controller Driver: AppleUSBOHCI
PCI Device ID: 0x0040
PCI Revision ID: 0x0001
PCI Vendor ID: 0x106b
Bus Number: 0x09
USB Bus:
Host Controller Location: Built In USB
Host Controller Driver: AppleUSBOHCI
PCI Device ID: 0x0040
PCI Revision ID: 0x0001
PCI Vendor ID: 0x106b
Bus Number: 0x08
USB High-Speed Bus:
Host Controller Location: Built In USB
Host Controller Driver: AppleUSBEHCI
PCI Device ID: 0x00e0
PCI Revision ID: 0x0004
PCI Vendor ID: 0x1033
Bus Number: 0x4bSORRY, BUT MY PREVIOUS POSTING DIDN'T HAVE THE FULL LIST OF HARDWARE CONTENTS of my Power Mac G5.
Hello Final Cut Studio 2 Experts,
I'm considering purchasing Final Cut Studi 2, and to make sure that I'll benefit from the full range of specific application (FCS/motion/color...) and I'd like to ask few questions (5 main points) regarding requirements and recommendations. So, please be prepared for much reading as I am not an expert on the matter. I like to know if my computer accepts any further hardware parts highly recommended and if I can purchase and install them myself. And yes, you should also know that I intend to use a Panasonic multi-format (HD/SD) camera for capturing and exporting videos.
N.B. Please note that the full list of my Hardware contents appear at the bottom of this text.
THANKS IN ADVANCE for your expert advise!
So, here we go:
Application-Specific Requirements
Final Cut Studio
Capturing HD resolution video using the ProRes 422 format requires a Mac Pro with an Intel Xeon processor or a G5 Quad computer and a qualified third-party capture card.
1) Do I need an Intel Xeon processor? If yes, can I purchase and install the component by myself (like RAM)?
Motion
The standard graphics card in any Mac Pro, MacBook Pro, iMac with Intel Core Duo, Power Mac G5, or iMac G5; 1.25GHz or faster PowerBook G4; or 1.25GHz or faster flat-panel iMac:
ATI Radeon 9800, 9700 Pro, 9600 XT, or 9600 Pro
ATI Mobility Radeon 9700 or 9600
NVIDIA GeForce 7600 GT, 7300 GT, 6600, 6600 LE, FX Go5200, or FX 5200 Ultra
For 16- and 32-bit rendering: a graphics card with at least 128MB of VRAM
2) Do I need one of the ATI Radeon 9800, 9700... or ATI Mobility Radeon? Why does my Hardware contents say ATI Radeon 9600, and not ATI Mobility Radeon 9600, is there a difference?
Color
The standard graphics card in any Mac Pro, 17-inch MacBook Pro, 24-inch iMac with Intel Core Duo, or 2.5GHz or faster Power Mac G5 Quad:
ATI Mobility Radeon X1600
ATI Radeon X1600
NVIDIA GeForce 7800 GT, 7600 GT, 7300 GT, 6600, or Quadro FX 4500
A display with 1680-by-1050 resolution or higher
A three-button mouse for full functionality
3) Do I need and ATI Mobility Radeon X1600 or ATI Radeon X1600?
DVD Studio Pro
For playback of DVD Studio Pro 4-authored HD DVDs: a Macintosh computer with a PowerPC G5 or Intel Core Duo processor
For writing finished projects to disc: an Apple SuperDrive or other DVD recorder
For writing finished projects to a double-layer disc: a double-layer-compatible recorder and double-layer media
For transporting HD projects to a replicator: an external drive or Internet transfer of the project’s disk image
For transporting SD projects that contain copy-protection or dual-layer features to a replicator: a DLT drive, external drive, or Internet transfer of the project’s disk image
4) Do I have an Intel Core Duo processor? Do I need an Apple SuperDrive?
What is a "replicator"?
Application-Specific Recommendations
Motion
One of the following graphics cards is highly recommended:
ATI Radeon X1900 XT, X850 XT, X800 XT, or X1600
NVIDIA GeForce 7800 GT, 6800 Ultra DDL, 6800 GT DDL, or Quadro FX 4500
For 32-bit rendering: a graphics card with 256MB of VRAM or more
Color
The following graphics card is highly recommended:
ATI Radeon X1900 XT
Dual displays with 1920-by-1200 or higher resolution
5) Do I have one of the highly recommended cards ATI Radeon X1900 XT etc...? How do I get it and can I install it myself?
My Power Mac G5 HARDWARE CONTENTS:
Hardware Overview:
Machine Name: Power Mac G5
Machine Model: PowerMac7,3
CPU Type: PowerPC G5 (3.0)
Number Of CPUs: 2
CPU Speed: 2.3 GHz
L2 Cache (per CPU): 512 KB
Memory: 4.5 GB
Bus Speed: 1.15 GHz
Boot ROM Version: 5.2.4f1
Serial Number: G85167AGRU3
ATA Bus:
SONY DVD RW DW-Q28A:
Model: SONY DVD RW DW-Q28A
Revision: KAS7
Serial Number:
Detachable Drive: No
Protocol: ATAPI
Unit Number: 0
Socket Type: Internal
SONY DVD RW DW-Q28A:
Model: SONY DVD RW DW-Q28A
Revision: KAS7
Serial Number:
Detachable Drive: No
Protocol: ATAPI
Unit Number: 0
Socket Type: Internal
Built In Sound Card:
Devices:
Texas Instruments TAS3004:
Inputs and Outputs:
Line Level Input:
Controls: Left, Right
Playthrough: No
PluginID: TAS
Headphones:
Controls: Mute, Left, Right
PluginID: TAS
Internal Speakers:
Controls: Mute, Master
PluginID: TAS
Line Level Output:
Controls: Mute, Left, Right
PluginID: TAS
Crystal Semiconductor CS84xx:
Inputs and Outputs:
S/PDIF Digital Input:
Controls: Mute
Playthrough: No
PluginID: Topaz
S/PDIF Digital Output:
Controls: Mute
PluginID: Topaz
Formats:
PCM 16:
Bit Depth: 16
Bit Width: 16
Channels: 2
Mixable: Yes
Sample Rates: 32 KHz, 44.1 KHz, 48 KHz
PCM 24:
Bit Depth: 24
Bit Width: 32
Channels: 2
Mixable: Yes
Sample Rates: 32 KHz, 44.1 KHz, 48 KHz
AC3 16:
Bit Depth: 16
Bit Width: 16
Channels: 2
Mixable: No
Sample Rates: 32 KHz, 44.1 KHz, 48 KHz
Bluetooth: No Information Found.
SONY DVD RW DW-Q28A:
Firmware Revision: KAS7
Interconnect: ATAPI
Burn Support: Yes (Apple Shipped/Supported)
Cache: 2048 KB
Reads DVD: Yes
CD-Write: -R, -RW
DVD-Write: -R, -RW, +R, +RW, +R DL
Burn Underrun Protection CD: Yes
Burn Underrun Protection DVD: Yes
Write Strategies: CD-TAO, CD-SAO, CD-Raw, DVD-DAO
Media: No
Fibre Channel: No Information Found.
FireWire Bus:
Maximum Speed: Up to 800 Mb/sec
ATI Radeon 9600:
Chipset Model: ATY,RV351
Type: Display
Bus: AGP
Slot: SLOT-1
VRAM (Total): 128 MB
Vendor: ATI (0x1002)
Device ID: 0x4150
Revision ID: 0x0000
ROM Revision: 113-A58504-113
Displays:
Cinema HD Display:
Display Type: LCD
Resolution: 1920 x 1200
Depth: 32-bit Color
Core Image: Supported
Main Display: Yes
Mirror: Off
Online: Yes
Quartz Extreme: Supported
Rotation: Supported
Display:
Status: No display connected
DIMM0/J11:
Size: 256 MB
Type: DDR SDRAM
Speed: PC3200U-30330
Status: OK
DIMM1/J12:
Size: 256 MB
Type: DDR SDRAM
Speed: PC3200U-30330
Status: OK
DIMM2/J13:
Size: 1 GB
Type: DDR SDRAM
Speed: PC3200U-30330
Status: OK
DIMM3/J14:
Size: 1 GB
Type: DDR SDRAM
Speed: PC3200U-30330
Status: OK
DIMM4/J41:
Size: 1 GB
Type: DDR SDRAM
Speed: PC3200U-30330
Status: OK
DIMM5/J42:
Size: 1 GB
Type: DDR SDRAM
Speed: PC3200U-30330
Status: OK
DIMM6/J43:
Size: Empty
Type: Empty
Speed: Empty
Status: Empty
DIMM7/J44:
Size: Empty
Type: Empty
Speed: Empty
Status: Empty
PC Cards: No Information Found.
PCI Cards: No Information Found.
Parallel SCSI: No Information Found.
System Power Settings:
AC Power:
System Sleep Timer (Minutes): 0
Disk Sleep Timer (Minutes): 0
Display Sleep Timer (Minutes): 0
Dynamic Power Step: No
Reduce Processor Speed: No
Sleep On Power Button: Yes
Automatic Restart On Power Loss: No
Wake On AC Change: No
Wake On LAN: No
Wake On Modem Ring: No
Adobe PDF 7.0:
Status: Idle
Print Server: Local
Driver Version: 10.4
Default: No
URI: pdf700://distiller/
PPD: Adobe PDF 3016.102
PPD File Version: 1.0
PostScript Version: (3016.102) 0
hp LaserJet 1012:
Status: Idle
Print Server: Local
Driver Version: 1.4.5
Default: Yes
URI: usb://Hewlett-Packard/hp LaserJet 1012?serial=00CNFB638356
PPD: hp LaserJet 1012
PPD File Version: 1.0
PostScript Version: (3011.104) 0
Serial-ATA Bus:
Maxtor 6B250S0:
Capacity: 233.76 GB
Model: Maxtor 6B250S0
Revision: BANC1E50
Serial Number: B61QB0RH
Removable Media: No
Detachable Drive: No
BSD Name: disk1
Protocol: ata
Unit Number: 0
Socket Type: Serial-ATA
Bay Name: "A (upper)"
OS9 Drivers: No
S.M.A.R.T. status: Verified
Volumes:
Macintosh HD:
Capacity: 233.64 GB
Available: 50.02 GB
Writable: Yes
File System: Journaled HFS+
BSD Name: disk1s3
Mount Point: /
Maxtor 6B250S0:
Capacity: 233.76 GB
Model: Maxtor 6B250S0
Revision: BANC1E50
Serial Number: B61QB0RH
Removable Media: No
Detachable Drive: No
BSD Name: disk1
Protocol: ata
Unit Number: 0
Socket Type: Serial-ATA
Bay Name: "A (upper)"
OS9 Drivers: No
S.M.A.R.T. status: Verified
Volumes:
Macintosh HD:
Capacity: 233.64 GB
Available: 50.02 GB
Writable: Yes
File System: Journaled HFS+
BSD Name: disk1s3
Mount Point: /
Serial-ATA Bus:
Maxtor 7L300S0:
Capacity: 279.48 GB
Model: Maxtor 7L300S0
Revision: BANC1E00
Serial Number: L602X73H
Removable Media: No
Detachable Drive: No
BSD Name: disk0
Protocol: ata
Unit Number: 0
Socket Type: Serial-ATA
Bay Name: "B (lower)"
OS9 Drivers: No
S.M.A.R.T. status: Verified
Volumes:
Primo Volume:
Capacity: 279.36 GB
Available: 154.23 GB
Writable: Yes
File System: HFS+
BSD Name: disk0s3
Mount Point: /Volumes/Primo Volume
Maxtor 7L300S0:
Capacity: 279.48 GB
Model: Maxtor 7L300S0
Revision: BANC1E00
Serial Number: L602X73H
Removable Media: No
Detachable Drive: No
BSD Name: disk0
Protocol: ata
Unit Number: 0
Socket Type: Serial-ATA
Bay Name: "B (lower)"
OS9 Drivers: No
S.M.A.R.T. status: Verified
Volumes:
Primo Volume:
Capacity: 279.36 GB
Available: 154.23 GB
Writable: Yes
File System: HFS+
BSD Name: disk0s3
Mount Point: /Volumes/Primo Volume
USB Bus:
Host Controller Location: Built In USB
Host Controller Driver: AppleUSBOHCI
PCI Device ID: 0x0035
PCI Revision ID: 0x0043
PCI Vendor ID: 0x1033
Bus Number: 0x2b
Hub in Apple Pro Keyboard:
Version: 4.10
Bus Power (mA): 500
Speed: Up to 12 Mb/sec
Manufacturer: Mitsumi Electric
Product ID: 0x1003
Vendor ID: 0x05ac (Apple Computer, Inc.)
Apple Optical USB Mouse:
Version: 3.40
Bus Power (mA): 100
Speed: Up to 1.5 Mb/sec
Manufacturer: Logitech
Product ID: 0x0307
Vendor ID: 0x05ac (Apple Computer, Inc.)
Apple Pro Keyboard:
Version: 4.10
Bus Power (mA): 250
Speed: Up to 12 Mb/sec
Manufacturer: Mitsumi Electric
Product ID: 0x020b
Vendor ID: 0x05ac (Apple Computer, Inc.)
Hub in Apple Pro Keyboard:
Version: 4.10
Bus Power (mA): 500
Speed: Up to 12 Mb/sec
Manufacturer: Mitsumi Electric
Product ID: 0x1003
Vendor ID: 0x05ac (Apple Computer, Inc.)
Apple Optical USB Mouse:
Version: 3.40
Bus Power (mA): 100
Speed: Up to 1.5 Mb/sec
Manufacturer: Logitech
Product ID: 0x0307
Vendor ID: 0x05ac (Apple Computer, Inc.)
Apple Pro Keyboard:
Version: 4.10
Bus Power (mA): 250
Speed: Up to 12 Mb/sec
Manufacturer: Mitsumi Electric
Product ID: 0x020b
Vendor ID: 0x05ac (Apple Computer, Inc.)
Apple Optical USB Mouse:
Version: 3.40
Bus Power (mA): 100
Speed: Up to 1.5 Mb/sec
Manufacturer: Logitech
Product ID: 0x0307
Vendor ID: 0x05ac (Apple Computer, Inc.)
Apple Pro Keyboard:
Version: 4.10
Bus Power (mA): 250
Speed: Up to 12 Mb/sec
Manufacturer: Mitsumi Electric
Product ID: 0x020b
Vendor ID: 0x05ac (Apple Computer, Inc.)
USB Bus:
Host Controller Location: Built In USB
Host Controller Driver: AppleUSBOHCI
PCI Device ID: 0x0035
PCI Revision ID: 0x0043
PCI Vendor ID: 0x1033
Bus Number: 0x0b
hp LaserJet 1012:
Version: 1.00
Bus Power (mA): 500
Speed: Up to 12 Mb/sec
Manufacturer: Hewlett-Packard
Product ID: 0x0d17
Serial Number: 00CNFB638356
Vendor ID: 0x03f0
hp LaserJet 1012:
Version: 1.00
Bus Power (mA): 500
Speed: Up to 12 Mb/sec
Manufacturer: Hewlett-Packard
Product ID: 0x0d17
Serial Number: 00CNFB638356
Vendor ID: 0x03f0
USB Bus:
Host Controller Location: Built In USB
Host Controller Driver: AppleUSBOHCI
PCI Device ID: 0x0040
PCI Revision ID: 0x0001
PCI Vendor ID: 0x106b
Bus Number: 0x09
USB Bus:
Host Controller Location: Built In USB
Host Controller Driver: AppleUSBOHCI
PCI Device ID: 0x0040
PCI Revision ID: 0x0001
PCI Vendor ID: 0x106b
Bus Number: 0x08
USB High-Speed Bus:
Host Controller Location: Built In USB
Host Controller Driver: AppleUSBEHCI
PCI Device ID: 0x00e0
PCI Revision ID: 0x0004
PCI Vendor ID: 0x1033
Bus Number: 0x4b
Message was edited by: Rinaldo -
Project too new for final cut 6.0.2 error message
My colleague at work has edited a rough cut on her Quad Core Intel computer. I'm using a Power Mac G5, and was able to download the project onto my desktop, but I get this message every time I try to open it: "This project is unreadable or may be too new for this version of Final Cut." We're both using FCP 6.0.2, I've done all the software updates I can, but I still receive the message. Does anyone know what I can do?
Did the person use the same workstation you are using? If you have the other person's volume mounted on your desktop, and you are definitely running the same OS, and you have the same version of FCP, then try opening the original file, not a copy. If it opens, do a *"save as"* instead of using a duplicated copy of the project.
Also, if they are using a different workstation, they may have another 3rd party component installed that they used, (maybe a filter or codec), that would interfere with it opening. The best way to make sure FibreJet works seemlessly in a multi-station work environment is to make absolutely sure that every station is a clone of the others. If you do an update on one, you have to do it on all. If you add an application, make sure you add it to all stations.
If you are using a different workstation, try to open it with the other station, then mount your desktop to that station through the LAN, and do a *"save as"* to your desktop, then try opening it from there.
Of course, do all this after trying to zip it before copying it. It only takes a second and would eliminate one aspect of the possible problem. -
So I've got a problem.
I had to restore my system to its factory settings, and I got Final Cut Pro 5 a few years back when I was in High School from my video teacher, under one of those education packages that works for like 15 or whatever different computers to install FCP. So it's a very legal copy.
When I had to restore, I knew I couldn't reinstall the program, so I had to move FCP to my External Hard drive. I had been running it off my external anyways for a while and it worked fine, just because I needed the space on my internal for applications I had to run without the external. But after I restored and installed Snow Leopard, I can't open FCP. I had back'd up my computer with Time Machine before the restore, so I put the Application Support files from the backup back into my Library>Application Support folder. But it doesn't open, but this time it gives me the error code and what not. So if this helps anybody, here you go.
Process: Final Cut Pro [3218]
Path: /Volumes/Thundercat/Applications/Final Cut Pro.app/Contents/MacOS/Final Cut Pro
Identifier: com.apple.FinalCutPro
Version: 5.0.4 (5.0.4)
Build Info: FCPApp-512141418~2
Code Type: PPC (Translated)
Parent Process: launchd [82]
Date/Time: 2010-11-15 03:13:47.297 -0600
OS Version: Mac OS X 10.6.4 (10F569)
Report Version: 6
Interval Since Last Report: 327 sec
Crashes Since Last Report: 7
Per-App Crashes Since Last Report: 7
Anonymous UUID: 5EFD957D-1BD7-4572-8062-870D31368BA4
Exception Type: EXC_CRASH (SIGTRAP)
Exception Codes: 0x0000000000000000, 0x0000000000000000
Crashed Thread: 0 Dispatch queue: com.apple.main-thread
Thread 0 Crashed: Dispatch queue: com.apple.main-thread
0 libSystem.B.dylib 0x802362b2 _pthreadkill + 10
1 libSystem.B.dylib 0x80235b5f pthread_kill + 95
2 com.apple.FinalCutPro 0xb80bfb30 0xb8000000 + 785200
3 com.apple.FinalCutPro 0xb80c0037 0xb8000000 + 786487
4 com.apple.FinalCutPro 0xb80dd8e8 0xb8000000 + 907496
5 com.apple.FinalCutPro 0xb8145397 spinlockwrapper + 1791
6 com.apple.FinalCutPro 0xb801ceb7 0xb8000000 + 118455
Thread 1:
0 libSystem.B.dylib 0x801400fa machmsgtrap + 10
1 libSystem.B.dylib 0x80140867 mach_msg + 68
2 com.apple.FinalCutPro 0xb819440f CallPPCFunctionAtAddressInt + 206231
3 libSystem.B.dylib 0x8016d81d pthreadstart + 345
4 libSystem.B.dylib 0x8016d6a2 thread_start + 34
Thread 0 crashed with X86 Thread State (32-bit):
eax: 0x00000000 ebx: 0x802f8500 ecx: 0xb7fff9ac edx: 0x802362b2
edi: 0xb8211640 esi: 0x00000005 ebp: 0xb7fff9d8 esp: 0xb7fff9ac
ss: 0x0000001f efl: 0x00000286 eip: 0x802362b2 cs: 0x00000007
ds: 0x0000001f es: 0x0000001f fs: 0x00000000 gs: 0x00000037
cr2: 0x802362a8
Binary Images:
0x80000000 - 0x8005bff7 com.apple.framework.IOKit 2.0 (???) <A013B850-6ECB-594A-CBD6-DB156B11871B> /System/Library/Frameworks/IOKit.framework/Versions/A/IOKit
0x8007a000 - 0x800e4fe7 libstdc++.6.dylib 7.9.0 (compatibility 7.0.0) <411D87F4-B7E1-44EB-F201-F8B4F9227213> /usr/lib/libstdc++.6.dylib
0x8013f000 - 0x802e5feb libSystem.B.dylib 125.2.0 (compatibility 1.0.0) <3441F338-2218-6D36-3F95-3A16FBF6713D> /usr/lib/libSystem.B.dylib
0x80366000 - 0x804e0fe3 com.apple.CoreFoundation 6.6.3 (550.29) <00373783-3744-F47D-2191-BEEA658F0C3D> /System/Library/Frameworks/CoreFoundation.framework/Versions/A/CoreFoundation
0x805d8000 - 0x805e6fe7 libz.1.dylib 1.2.3 (compatibility 1.0.0) <3CE8AA79-F077-F1B0-A039-9103A4A02E92> /usr/lib/libz.1.dylib
0x805eb000 - 0x805f7ff7 libkxld.dylib ??? (???) <322A4B52-8305-3081-6B74-813C3A87A56D> /usr/lib/system/libkxld.dylib
0x805fb000 - 0x80641ff7 libauto.dylib ??? (???) <85670A64-3B67-8162-D441-D8E0BE15CA94> /usr/lib/libauto.dylib
0x8064e000 - 0x807d0fe7 libicucore.A.dylib 40.0.0 (compatibility 1.0.0) <2314BD12-0821-75BB-F3BC-98D324CFD30A> /usr/lib/libicucore.A.dylib
0x80832000 - 0x808dffe7 libobjc.A.dylib 227.0.0 (compatibility 1.0.0) <DF8E4CFA-3719-3415-0BF1-E8C5E561C3B1> /usr/lib/libobjc.A.dylib
0x808f3000 - 0x808f6fe7 libmathCommon.A.dylib 315.0.0 (compatibility 1.0.0) <1622A54F-1A98-2CBE-B6A4-2122981A500E> /usr/lib/system/libmathCommon.A.dylib
0x8fe00000 - 0x8fe4162b dyld 132.1 (???) <A4F6ADCC-6448-37B4-ED6C-ABB2CD06F448> /usr/lib/dyld
0xb8000000 - 0xb81defff com.apple.FinalCutPro 5.0.4 (5.0.4) <6437A74D-607F-7339-5F7E-F6B0EF81C25D> /Volumes/Thundercat/Applications/Final Cut Pro.app/Contents/MacOS/Final Cut Pro
0xffff0000 - 0xffff1fff libSystem.B.dylib ??? (???) <3441F338-2218-6D36-3F95-3A16FBF6713D> /usr/lib/libSystem.B.dylib
Translated Code Information:
objc[3218]: garbage collection is ON
NO CRASH REPORT
Model: MacBookPro3,1, BootROM MBP31.0070.B07, 2 processors, Intel Core 2 Duo, 2.2 GHz, 4 GB, SMC 1.16f11
Graphics: NVIDIA GeForce 8600M GT, GeForce 8600M GT, PCIe, 128 MB
Memory Module: global_name
AirPort: spairportwireless_card_type_airportextreme (0x168C, 0x87), Atheros 5416: 2.0.19.10
Bluetooth: Version 2.3.3f8, 2 service, 19 devices, 1 incoming serial ports
Network Service: AirPort, AirPort, en1
PCI Card: pci168c,24, sppci_othernetwork, PCI Slot 5
Serial ATA Device: FUJITSU MHW2120BH, 111.79 GB
Parallel ATA Device: MATSHITADVD-R UJ-857E
USB Device: External HDD, 0x1058 (Western Digital Technologies, Inc.), 0x0903, 0xfd100000
USB Device: Built-in iSight, 0x05ac (Apple Inc.), 0x8502, 0xfd400000
USB Device: Apple Internal Keyboard / Trackpad, 0x05ac (Apple Inc.), 0x021a, 0x5d200000
USB Device: IR Receiver, 0x05ac (Apple Inc.), 0x8242, 0x5d100000
USB Device: Bluetooth USB Host Controller, 0x05ac (Apple Inc.), 0x8205, 0x1a100000
USB Device: USB Receiver, 0x046d (Logitech Inc.), 0xc51b, 0x1a200000
I took a look at it and couldn't really find what was going on, so any help is appreciated.The Final Cut software that I had installed was also the same software that we were running on our Macs at the high school. 3 of those Macs were iMacs with Intel processors. I didn't think I had been running FCP that functioned on the PPC Operating systems, because it's the same software that was working on the iMacs, but now that I think of it, we had PPCs running it too. I hadn't had any issues with it other than the occasional random crash that was solved by a program restart. If it was PPC based, wouldn't it -not- let me install it on the computer? Like I said before, I had been running it on my laptop with ease for a couple years with no large problems.
I had an issues like this when I tried to boot up my Adobe Photoshop from Hard Drive after I restored, and it was solved by taking my application Support folder and some other random files from my backup and putting them in my library. I assume that the movement of files is the problem and I'm just missing some minor things, but it says I'm running a PPC version of the software? -
Is there a way to run Motion and Final Cut Pro on Separate Machines?
Is there a way to run Motion and Final Cut Pro from the same Final Cut Studio license on separate machines? We hadn't realised when we bought Final Cut Studio that it wouldn't allow this. Our editor doesn't use motion, and while I mainly use After Effects on our motion graphics machine, I was wanting to try using motion for some particle effects. Unfortunately, it won't let me open it while Final Cut is running on our editor's machine. I can understand not letting two copies of same application run under the same serial number at the same time, but it would be nice to be able to use both programs that we own concurrently. At very least it would be good to warn you that this isn't possible in the product description, not in some fine print license agreement once you have already bought the software.
-MattI do not know of any software, in any platform that can operate from the same license over a network simultaneously.This is the exact reason for the existence of Volume Licensing. If for example a project ran in each one of the included applications from different sources that were not an active network, I doubt you would have a problem.Like, doing a project at work and geting the outcome with the Powerbook at home...Sorta!
-
Final Cut Studion 2 Install Failure on 1st Disc
I had to reinstall FCS2 after a reinstall of Leopard (along with all the updates). When I checked the FCS2 libraries, none of the pro apps could find any of the content files. The files were there, but somehow the links in FCS2 got messed up, so I figured I would reinstall FCS2 and save myself some grief trying to figure out what got broke.
Famous last words....
When I try to install FCS2 (4 times now), I start the install from the main install disc, go with the defaults, and it fails about 2 minutes in with the following error:
Feb 23 00:47:19 G5Quad Installer[1004]: Processing Motion Series LiveFonts:
Feb 23 00:47:19 G5Quad Installer[1004]: Determining files to install
Feb 23 00:47:19 G5Quad Installer[1004]: It took 0.02 seconds to create the install plan for MotionSeriesLiveFonts.
Feb 23 00:47:19 G5Quad Installer[1004]: Configuring deferred files
Feb 23 00:47:19 G5Quad Installer[1004]: Assembling temporary receipt
Feb 23 00:47:19 G5Quad Installer[1004]: Performing pre-extraction actions
Feb 23 00:47:19 G5Quad Installer[1004]: Creating destination path
Feb 23 00:47:19 G5Quad Installer[1004]: Validating package payload
Feb 23 00:47:19 G5Quad Installer[1004]: Starting file extraction
Feb 23 00:47:19 G5Quad pkgExtractor[1231]: Extracting...
Feb 23 00:48:42 G5Quad pkgExtractor[1231]: BomFileError 2: No such file or directory - ./LiveType/LiveFonts/Pro Series/Wiggle.ltlf/proxy
Feb 23 00:48:42 G5Quad pkgExtractor[1231]: 53 of 53 files written in 82.76 seconds.
Feb 23 00:48:42 G5Quad pkgExtractor[1231]: 1251832 kilobytes installed at 14.8 MB/s.
Feb 23 00:48:42 G5Quad pkgExtractor[1231]: pkgExtractor exited with error 1 while processing package '/Volumes/Final Cut Studio/Installer/Packages/MotionSeriesLiveFonts.pkg/Contents/Archive.pax.gz'
Feb 23 00:48:42 G5Quad Installer[1004]: Install failed: The Installer could not install some files in “/Library/Application Support”. Contact the software manufacturer for assistance.
Feb 23 00:48:42 G5Quad Installer[1004]: IFDInstallController 85CF30 state = 7
Feb 23 00:48:42 G5Quad Installer[1004]: Displaying 'Install Failed' UI.
Feb 23 00:48:42 G5Quad Installer[1004]: 'Install Failed' UI displayed message:'The Installer could not install some files in “/Library/Application Support”. Contact the software manufacturer for assistance.'.
Feb 23 00:53:26 G5Quad installdb[1354]: started (uid 96)
Feb 23 00:53:26 G5Quad installdb[1354]: Opened receipt database on '/' with schema 17.
Feb 23 01:01:03 G5Quad installdb[1354]: done. (193.935u + 199.902s)
Feb 23 01:02:13 G5Quad installdb[1545]: started (uid 96)
Feb 23 01:02:13 G5Quad installdb[1545]: Opened receipt database on '/' with schema 17.
Feb 23 01:09:32 G5Quad installdb[1545]: It took 438.98 seconds to get 552765 files in group >'com.apple.repair-permissions.pkg-group'
Feb 23 01:09:48 G5Quad installdb[1545]: done. (195.237u + 198.497s)
I've installed from these discs before without any problem, but this time it errors out with the same problem every time.
I have checked and repaired the permissions on the destination HDD, but no joy.
Can anyone tell me why the installed failed and what I can do so the install will continue?
Any help or suggestions would be greatly appreciated.
Thanks
GaryThanks, X
All the ram has been replace with new Crucial sticks as when I had the box in for service in Dec (still on Apple care, now not), a daughter card was replaced and I was told I had bad ram. Prior to servicing, the AHT failed almost immediately on a FAN error.
I was doing extensive testing this weekend to, hopefully, eliminate any possible problems on my end, which I have pretty much done, short of wiping the startup drive. I guess now I am only left with making a bootable backup, and dropping the box off with service (hopefully, they will grandfather the SO from Dec to this work) and let them do what the will.....
Anyway, I pretty sure you are right about it being a hardware issue as +99% of the kernel panics occur on CPU3, and the majority while current task is Kernel_task
Thanks for the input...
Gary -
Is my issue with Final Cut Pro or my Macbook pro?
I'm going to try to be as thorough as possible in explaining my situation because I can't figure this problem out and it's exhausting me. I have an early 2011 macbook pro with the 2.2 ghz processor. I upgraded to 16gb of ram almost a year ago. I've been using Final Cut Pro 7 on this computer for several years now without issue and have made no setting changes that would prompt my problems. A few months ago my battery decided to stop holding a charge and now just registers 0%. Around the same time, while editing a short video my computer began behaving like it was overheating. It would crash, restart, crash and then restart again. After I did a disk and permissions repair it began to work normally again and I haven't had any more crashing issues. Around this period of time I began noticing that when my computer turns on it doesn't register the correct time and date. Given a few moments it corrects itself, but for some strange reason it was doing that every time.
Anyway, around that time I tried to upgrade to Mavericks and experienced an issue during installation because my hard drive was apparently damaged in some way and the installation couldn't be completed. I restored my previous OS and tried to carry on as I was with the damaged hard drive for as long as I could. I was still able to do everything I needed on the computer. I could still edit videos with Final Cut. I could still browse the internet. I could still stream Netflix.
About a month ago Final Cut stopped working. I could open the program, start a new project and import media files, but when I dragged them into the timeline, they just stuttered (audio would play but video would lag and then jump several frames then lag and jump frames). At the time I assumed this was because my hard drive finally gave up, but I was still able to do other functions like browse the internet and stream basketball games with nba league pass (granted they weren't crisp hd - on a side note, netflix was also behaving oddly. when I would browse through my list, it wouldn't stop scrolling when I moved the mouse away.) so I assumed the hard drive was my issue.
I just replaced my hard drive with an ssd (crucial m500) and upgraded to mavericks (10.9.1) and now I am having the same issues. Netflix behaves fine. Basketball games stream fine. My battery is still dead (obviously that wasn't going to change). I get the wrong date and time for a minute, but I'm thinking that's battery related now. But Final Cut still lags to the point where I can't use it. Video clips also won't render. I thought this might be an issue with the Final Cut program so I uninstalled it and reinstalled it, but it still did the same thing. Assuming I hadn't correctly/completely uninstalled it, I downloaded HitFilm 2 (an editing program that had a free download promotion at the time), figuring using a different program, if i could edit video with it, then my issue is with Final Cut and not my computer. Unfortunaely, I'm having the same lagging issues with HitFilm as I was with Final Cut.
I'm at a loss as to what the problem is. Sorry if this was a rambling post, but I wanted to get as much of the background out there as possible, should it provides anyone with a clue as to what is the issue here. Does anyone have any idea what could be at fault here? I'm stumped.Hardware Information:
MacBook Pro (15-inch, Early 2011)
MacBook Pro - model: MacBookPro8,2
1 2.2 GHz Intel Core i7 CPU: 4 cores
16 GB RAM
Video Information:
Intel HD Graphics 3000 - VRAM: 512 MB
AMD Radeon HD 6750M - VRAM: 1024 MB
System Software:
OS X 10.9.1 (13B42) - Uptime: 5 days 3:30:18
Disk Information:
Crucial_CT480M500SSD1 disk0 : (480.1 GB)
EFI (disk0s1) <not mounted>: 209.7 MB
SSD (disk0s2) /: 479.11 GB (235.88 GB free)
Recovery HD (disk0s3) <not mounted>: 784.2 MB
MATSHITADVD-R UJ-898
USB Information:
Apple Computer, Inc. IR Receiver
Apple Inc. FaceTime HD Camera (Built-in)
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
FireWire Information:
Thunderbolt Information:
Apple Inc. thunderbolt_bus
Kernel Extensions:
Problem System Launch Daemons:
Problem System Launch Agents:
Launch Daemons:
[System] com.adobe.fpsaud.plist 3rd-Party support link
[System] com.bombich.ccc.plist 3rd-Party support link
Launch Agents:
User Launch Agents:
[not loaded] com.divx.agent.postinstall.plist 3rd-Party support link
User Login Items:
iTunesHelper
Dropbox
WDQuickView
Internet Plug-ins:
FlashPlayer-10.6: Version: 12.0.0.44 - SDK 10.6 3rd-Party support link
OVSHelper: Version: 1.1 3rd-Party support link
Flash Player: Version: 12.0.0.44 - SDK 10.6 3rd-Party support link
QuickTime Plugin: Version: 7.7.3
DivXBrowserPlugin: Version: 2.2 3rd-Party support link
Default Browser: Version: 537 - SDK 10.9
Silverlight: Version: 5.1.10411.0 - SDK 10.6 3rd-Party support link
iPhotoPhotocast: Version: 7.0 - SDK 10.8
Audio Plug-ins:
BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
AirPlay: Version: 1.9 - SDK 10.9
AppleAVBAudio: Version: 2.0.0 - SDK 10.9
iSightAudio: Version: 7.7.3 - SDK 10.9
3rd Party Preference Panes:
DivX 3rd-Party support link
Flash Player 3rd-Party support link
Bad Fonts:
None
Old Applications:
SLLauncher: Version: 1.0 - SDK 10.5 3rd-Party support link
/Library/Application Support/Microsoft/Silverlight/OutOfBrowser/SLLauncher.app
WFTPairing: Version: - SDK 10.4 3rd-Party support link
/Applications/Canon Utilities/EOS Utility/WFTPairing.app
Nisus Thesaurus: Version: 1.1 - SDK 10.4 3rd-Party support link
Time Machine:
Skip System Files: NO
Auto backup: YES
Volumes being backed up:
Destinations:
Time Machine Backups [Local] (Last used)
Total size: 931.16 GB
Total number of backups: 2
Oldest backup: 2013-04-15 00:34:39 +0000
Last backup: 2014-01-22 03:55:49 +0000
Size of backup disk: Excellent
Backup size 931.16 GB > (Disk size 0 B X 3)
Time Machine details may not be accurate.
All volumes being backed up may not be listed.
Top Processes by CPU:
4% WindowServer
3% EtreCheck
0% ps
0% aosnotifyd
Top Processes by Memory:
180 MB Safari
164 MB Finder
164 MB com.apple.IconServicesAgent
115 MB PluginProcess
105 MB com.apple.WebKit.WebContent
Virtual Memory Information:
11.22 GB Free RAM
2.77 GB Active RAM
296 MB Inactive RAM
1.71 GB Wired RAM
782 MB Page-ins
0 B Page-outs -
I wanted to look at getting something more then iMovie and saw the Final Cut Studio 2 is for sale this week for $50 while Final Cut Studio 3 is still $300 at my campus bookstore (education licenses). Is there a $250 difference between the two versions that someone that will just be using it for a few home move projects will be able to detect?
Message was edited by: firemandan900Also why does Apple charge so much more directly for the Academic version ($900 3 times as much) as my school can sell it to me direct, including the 10 lbs of instruction manuals? Is it just a volume agreement my school has?
-
Final Cut Studio 2 and New Macbooks with Nvidia graphics
Do the new Macbooks announced today (10/14/2008) meet the minimum system requirements for running Final Cut Studio 2?
Lecturing? Really? Not hardly, but I'll answer your query as succinctly as possible.
Will the new Macbook run Final Cut Studio 2? I will wager that FCP will operate, DVD SP will operate and Soundtrack Pro will operate. I highly doubt Color will operate and am not sure about Motion due to the graphics card.
That should answer your question. To "lecture" some more, where will you have media stored and how will you get media, any sort of media into these applications?
As far as graphics and video are concerned, that distinction has been met above. I'm sure the Macbook will operate Photoshop with no problem.
But again, why not check the minimum tech specs for yourself? -
Final Cut Pro 7 Setup/workflow
Hello there,
I work at a small company and we are starting to build large amount of raw tape and capture scratch data. I am writing to learn about best practices, procedures, and troubleshooting techniques. We have two editors who both work off Macs on a 1 gig Ethernet network using Final Cut Pro 7. The data lives on a remote storage device, synology volume. They are currently connecting to the device using AFP and creating projects over the network.
Mac Devices:
iMac 27 OSX 10.9.5
16GB RAM
512 SSD
Synology:
4x1 gig E bonded
40 TB usable
Small Project :
Raw Data: approximately 13GB
Capture Scratch: approximately 15GB
Final Cut 7 project file: 170KB
Large Project :
Raw Data: approximately 135GB
Capture Scratch: approximately 345GB
Final Cut 7 project file: 11MB
The two editors are experiencing different level of lags and poor editing experience. The editors work off the remote volumes, they don't move the data (capture scratches) to their local drives when they are working on these projects.
I have a number of questions about to how approach this:
1. What are best practices for setting up -editor machines/volumes/etc?
2. What transfer/mount protocols should they use AFP/SMB/NFS ?
3. What software can I use to get benchmarks for read/write to the remote volumes ?
4. If we went to a 10Gig E network switch, should we upgrade the nic cards on the iMacs? should we use Fiber optic ? copper?
Any help would be greatly appreciated.
Thanks
Media@relayIs this Synology volume rated for the high demands of video playback? Most generic servers companies employ for data isn't up to the rigors and speeds needed for video editing, especially two stations needing to access video at the same time. If you plan on having a server for video, you need to make sure it's fast enough for video work.
Both of those projects really have very little video data. Get 1TB drives for both stations and work off the media on them. FW800 at least...no USB2. USB3 is fine, if the computers have USB 3 connections. Thunderbolt is best, if they have those connections. -
Is it possible to install Final Cut Pro on a External TB Hard Drive
I would like to buy an external TB drive for my iMac and was wondering if it is possible to just run Final Cut Studio and all of it's apps off of a TB drive?
No. The Final Cut Studio applications must be on the same volume as Mac OS X.
You can put the accompanying content, such as motion templates etc on another drive. -
How can I get a version of Final Cut Pro X that works on OS Mountain Lion?
I just downgraded my laptop to its original OS (Lion) and will be upgrading soon to Mountain Lion because this laptop is too old to work with Mavericks or Yosemeti. So far Final Cut Pro X, Motion and Compressor (which I had originally purchased when I first bought the computer) do not work. Will Final Cut Pro X work on Mountain Lion? If not, what can I do to get a version that will work?
Thanks!10.0.9 is the latest version compatible with Mountain Lion. I found this article which may help you:
http://thefcpxeditor.tumblr.com/post/70885235923/what-i-can-run-fcp-x-10-1-and-1 0-0-9-on-the-same
At the time it was written it was apparently possible to download from the app store with a computer running ML. Maybe this is still the case.
FCP 10.1. has video requirements which are not met by older machines. I'm not sue about 10.0.9 but that might possibly be a 'gotcha'
I'm a bit confused though since if you downgraded you laptop to Lion but Mountain Lion is the latest OS it will run then you must have been running ML already
Geoff. -
Final Cut Studio (ver 1.0) won't install on brand new 2.8 ghz intel coreduo
I just bought a new 15inch MacBook Pro (4 GB memory) and went to install Final Cut Studio (ver 1.0) and then install the Final Cut Studio (HD) upgrade, but when I try to install Final Cut Studio (ver 1.0) I get this error: "Your computer does not have the hardware required to run this software. See the Read Me for details." All of the minimum requirements seem to be easily met, and I've run this old version of Final Cut Studio and the HD upgrade on my previous and older macbook, so I'm really confused on this error message. I can't find anything online. Anyone have any idea what is causing this hardware error?
I am getting the same message."Your computer does not have the hardware required to run this software. See the Read Me for details." I have FCP 5 and I am trying to install it on my new MacBook Pro. FCP 5.0 worked fine on my other mac and Im getting this message on my new one! any thoughts?
Maybe you are looking for
-
I had my ipad air stolen and tried using the "find my ipad app" only to realize it won't even track it unless it it hooked to wi-fi! I am sure thieves figure out how to use it even with my pass code on. Is there ANY thing else that can b done to trac
-
Why won't my computer start up fully
It acts like it wants to turn on and them like 15% in it turns right back off and it is fully charged
-
Why can't I downgrade my account?
I Have been charged for storage on icloud that I am not using and I want to downgrade my account. I have followed the instructions to do this but I can't confirm it because the 'done' button is greyed out.why is this happening?
-
When I send an email, the box use to be much small, like 4" X 6", but now it takes up the entire screen. How can I get it to go back to the smaller scree?. What did I accidentally touch?
-
Show VI from another VI as a popup dialog
Hi there, I have a beginner question. I created a VI which displays some data, and I have an Edit button to edit the selected data. When I press the Edit button, I want to show another VI, preferrably as a modal dialog. How to do this? Thanks, Csaba