'000' problem

I'm currently having a problem with my TV @nywhere. when I run MSI PVS and the TV display is up, it acts as if it is continuously receiving the input of the zero button being pressed. has anyone had a similar problem? it does not happen when i have win XP freshly installed. only after i install a few different applications or drivers does it start to act like this, but i'm not sure what is causing it or how to avoid it
i'm running an AMD athlon xp 1900 system on an asus a7v8x mainboard
thanks for any help!

You're going to have to track what you did to find the culprit.
You have two options in this case:
1.) Remove the software that you installed prior to the problem and then re-install the software one by one untill the problem occurs.
2.) If you have system restore enabled, then restore it back to the point where you know there wasn't a problem. Then you can once again start installing software one by one and checking functionality between installation routines. You should be able to narrow it down that way.
The latter is probably your best option, provided you have System Restore enabled.

Similar Messages

RFC error text: timeout during allocate / CPIC-CALL: 'ThSAPCMRCV'

I am having this error pop up very frequently on some new SAP systems. This will randomly happen and keep us from being able to release transports and import them in STMS. I receive the following error:
There was an attempt to start the transport control program tp using the local RFC interface.
An error occurred here.
Error code: 4
RFC error text: timeout during allocate / CPIC-CALL: 'ThSAPCMRCV'
- When I check the Transport Tool (STMS: import queue> check> transport tool) I get the following information:
timeout during allocate / CPIC-CALL: 'ThSAPCMRCV' : cmRc=20 thRc=456#Time
out during connection setup (check that partner exists
- When checking the TP System Log I receive the same error. The RSTPTEST report does not give any additional information. SM21 shows a warning and an error:
Warning:
Communication Error, CPIC return code 020, SAP Return code 456
Dialog Process No. 000
Problem cl: SAP web AS problem
Package: STSK
Further Details:
Module Name: thxxhead
Line: 7488
Error Text: 020456
Caller: ThRecei
Error:
Problem cl: transaction problem
Package: STTO
All of these errors are only pointing to a time out. I cannot figure out why this is happening. I checked the TMS RFC connection in SM59 and they are fine. I have been able to work around this issue in 2 different ways. First, I can delete the files in the "\trans\tmp" directory on the server. Sometimes this resolves the error. Else I have to restart the system.
I need to understand where this issue is coming from and how to resolve it. It is becoming more and more frequent. Thank you for your help!

Hi,
i have had similar issues during this week. After looking for a solution everywhere i found out that i didn't set up the FQDN on this system.
Symptoms were:
se38 > RSTPTEST timed out sometimes(not always)
sm59 > TCP/IP connections > CALLTP_WindowsNT > test connections timed out sometimes (again, not always)
STMS Overview > Systems: I was not always able to distribute and activate configuration from the Domain controller via Extras > Distribute and Activate Configuration (it died on the mentioned system)
Transports failed mostly with the same error.
The error log was somewhere deep in ST11. It could not resolve our FQDN.
The solution, for me, was to add our FQDN to the WINDIR\System32\drivers\etc\hosts file.
We upgraded the kernel as well (from 7.20 patch 046 to most current) but this didn't help.
The FQDN is a concatenation of computer name and dns suffix of the network (if you have none, you can add one via rightclick on the used network adapter>ipv4>properties>Advanced>DNS tab, so in the end the host file looked like
127.0.0.1 localhost computer-name.ourSuffix.com
After this line has been added, the error stopped and the transports work again.
I hope it helps. Good luck.

Change Value based on Dynamical Object

Goal:
The goal is to make the variable with value '2014-06-14 09:00:00.000'
Problem:
The syntax code is created as a dynamical object how do you make it from '2014-06-14 16:20:10.000' into value '2014-06-14 09:00:00.000'?
DECLARE @a datetime = '2014-06-14 16:20:10.000'

Are you looking for this?
DECLARE @a datetime = '2014-06-14 16:20:10.000'
select dateadd(hour,9,convert(datetime,convert(date,@a)))
set @a = '2014-06-14 08:20:10.000'
select dateadd(hour,9,convert(datetime,convert(date,@a)))
Satheesh
My Blog |
How to ask questions in technical forum

Please read this iTunes Devs.

For the love of God, it's impossible to find a direct feedback link on the site for iTunes, so I'm posting it here in prayer of a dev actually reading it.
/end mini-rant
I would like to have iTunes show me a column that simply displays a "Yes" or a "No" in it on each song's line, telling me whether the song has lyrics embeded in it ("Yes") or not ("No"). The reason for this is that I like to add lyrics to my songs before I put them on my iPod so I can view them on the iPod later, and with thousands of songs it gets confusing very quickly which one's I have already added lyrics to, or not, and need to.
The same request goes for album artwork. Both of them obviously would be toggle'able in the View Options along with all of the other columns.
As an addition to the above, I'd love to see a viewer pane, much like the album artwork one, that displays the lyrics embedded in a song as it plays.
My last small request is to add Mozilla Thunderbird to the list email contacts that it can import. I believe Thunderbird is now mainstream enough that it would be useful. There is currently an extension for TB that will do this, but it would be nice to not have to add extra software to my computer and have it built right into iTunes itself.
If these get added you'll automatically have my undying gratitude.
Huge bonus points if you devise a way to auto-import the correct lyrics and artwork for each and every song in the library with the click of a button within iTunes. It's a monumental task to manually do this with a 30gb full iPod.
Thanks in advance.
g5 30gb Windows XP Pro

"Widespread Horror" is a poor characterization for any of the transient problems with the iPod or iTunes (with the possible exception of the 'less than adequate' information provided about the initial iPod batteries). Even iTunes 5.0 wasn't that bad from a percentage basis, but it did spike the posts seen here for quite a while.
The iTunes and iPod programs work fantastically well on the vast majority of Windows and Apple PCs. There are over 25 million unique installations of iTunes out there and somewhat close to 45 million iPods sold to-date. Some will have problems. This is where people go to get them fixed. In the grand scheme of things, it is an extremely small percentage of users that have real problems. The ‘Law of Large Numbers’ dictates that there will, in appearance, be many people with problems. Even 1% of 25 million is 250,000 problems. If only 10% of those folks came here, we would be swamped. It’s not happening.
That said, even one glitch, when it happens to you, can be maddening...
As for why one cannot directly reach the iPod/iTunes/Apple support folks easily, consider this. A fully loaded support service will run a company at least $75/hour per employee assigned to answer phones. There's a lower limit startup/run cost, so 1 or 2 staff is not on that lower level of expense.
If you spend any time on these boards, you'll see that the majority of the problem are self-inflicted in some manner or another: Malware, viruses, poor PC upkeep, failure to read &/or understand the directions, and the like.
Apple could provide a support line for all the users, but the costs would be passed back to everyone (regardless of whether they ever used the service) in the form of higher music download prices, higher iPod prices and maybe even a charge for 'buying' iTunes.
The vast majority of users do not need these services and probably do not want to pay for the small percentage of users who do. I know I do not.
And Katrina is correct. If we see a definitive and reproducible problem with iTunes/iPod, we can directly alert the Hosts who can inform the tech support team. This has happened, but not to the extent that some of the posters would 'expect', all for the reasons I touched on above.

*URGENT* Change in logic of Depreciation key

Dear SAP Gurus,
We have an urgent requirement to change a logic in depreciation key.
Current Scenario:
Asset is depreciated until the remaining value of asset reaches 10% of acquisition cost.
Required Scenario:
Asset is depreciated until the remaining value of asset reaches 10% of acquisition cost. Thereafter, the remaining value is depreciated until the remaining value of asset reaches 5% of acquisition cost.
For eg.)
Acquisition cost: JPY100,000
Life: 4years
depreciation rate 0.438
declining-balance method
Year    accum depre   residual value
Y1        JPY43,800        JPY56,200
Y2        JPY68,416        JPY31,584
Y3        JPY82,250        JPY17,750
Y4        JPY90,024          JPY9,976
Y5        JPY94,394          JPY5,606
Y6        JPY95,000          JPY5,000
[Problem]
In the Depreciation key being set, the final depreciable limit is not considered as described above.
Therefore, the system only compute depreciation until the remaining value of asset reaches 10% of acquisition cost and stop calculation. The system doesn't allow to adjust depreciation amount using ABMA (Manual depreciation) either.
[Requirement]
We would like to ask you to modify configuration.
Question: How and where do I make this change to take care of the requirement?
I have already changed the depreciation rate to 5% in T-code AFAMA (Maintain Depreciation Key.
SPRO > Financial Accounting > Asset Accounting > Depreciation > Maintain Depreciation Key)
But still it is not working properly.
Could you please suggest if there is anywhere else I need to change the configuration?
Suitable reward points shall be awarded.
Regards,
Sreeni.
+919986032960.

Hi.
After making changes to the depreciation key, you must run transaction AFAR in order for the system to recalculate the values.

INITIAL Check on NUMC fields

Hey,
is there any nice way to make a check like "IS INITIAL" for char values on numc fields ? My problem is that there is a '000' in the numc field and so the "IS INITIAL" thinks that there are values.
Bad solution:
IF field IS NOT INITIAL AND NOT field EQ '000'.
ENDIF.
Greetz

IS INITIAL checks if the variable in concern has the initial values. In your case you have the variable as NUMC & initial value for this is '0' for every position (refer [http://help.sap.com/abapdocu_70/en/ABENBUILT_IN_TYPES_VALUES.htm|http://help.sap.com/abapdocu_70/en/ABENBUILT_IN_TYPES_VALUES.htm])
So your assumption that "My problem is that there is a '000' in the numc field and so the "IS INITIAL" thinks that there are values" is not correct. And your IS INITIAL check will be OK if field is defined as numc & has the value '000'
problem exists when you copy the numc field with its initial values into a char. At this point the initial check will not work anymore on the new char field.
Why dint you mention this before ? Anyways if you have character variable, and you want to check if it contains only zeroes you can go for:
IF FIELD CO '0'.
ENDIF.
BR,
Suhas
Edited by: Suhas Saha on Apr 14, 2010 4:38 PM

Problems with outlook and address book contacts: my outlook contacts had around 3,000 entries. Outlook duplicated by itself and now outlook and address book have each over 340,000. What should I do?

Problems with outlook and address book contacts: my outlook contacts had around 3,000 entries. Outlook duplicated entries and have now 340,000. I reinstalled microsoft office and, thus, outlook, and reinstalled mac OS X system and applications. While I managed to delete outlook contacts so that I can re-sync with my blackberry, the contacts at Mac Address Book were not deleted and still have over 340,000 entries. I do not mind deleting all contacts since I have back up, but I have not been able to delete them. Also, when I go at Address Book and try to delete or merge duplicated entries, the system takes forever and never ends because of such large amount of entries. Worse, when I do so I run out of RAM memory.
My Macbook pro is just 2 months old.
What should I do? Is there a way to delete my Mac Address Book without having the problem above?
Many thanks
Regis

zlatan24 wrote:
For solving out troubles connected with corrupted or lost address book you may use address book recovery. It owns various features such as restoring wab files, it working under any Windows OS. The utility has modern and easy to use interface due to almost every experienced users.
If it is a windows problem it's not going to run on the OP's MacBook Pro

Lion Address Book problem - all of over 2,000 contacts disappeared - one mysteriously reappeared - then they all reappeared during resync with Gmail!

The subject iine pretty much describes what happened.
I am wondering if it is anything to do with what looks like an odd file in the directory ~ Library -> Application Support -> Address Book
As well as the "real" database file there is this zero bytes one:
AddressBook-v22.abcddb.0F392545-78F2-4AE6-8D30-457C138332B2.unknown
From the date, it might be something to do with installing and linking Cobook to Address Book maybe?
These are the files and folders in that directory (sub-directory files not shown):
I have enabled the debug menu in Address Book but have not been able to find any info about how to use it. I lie! I did read that I might possibly have been able to "retrieve" the contacts using the debug menu "Force Refresh" - however that was after I had started to resync with Gmail contacts.
I realised that something odd was going on during resync when I saw that there were over 4,000 contacts being processed rather than the 2,000 or so that I was expecting. Initially, none of the contacts groups from Gmail were showing in Address Book after this partial sync (I stopped it when I saw what was happening). However, after quitting and restarting Address Book, the groups appeared again.
I have not lost my contact data - as well as Gmail contacts I also have an Address Book backup from about two weeks ago and also the backup created by Cobook about two weeks ago. (Installed Cobook as it looked like a very efficient way of getting to view individual contacts quickly - Quicksilver just isn't finding them at all). I used third party app "Contacts Sync for Google Gmail" to link Address Book with Gmail as it gives you options about what to do for each duplicate card that it identifies.
I then spent a lot of time sorting through the contacts on Address Book, finding duplicates, updating data, etc. with the intention of managing contacts in Address Book from then on, rather than in Gmail. Not all of these changes are reflected in the Cobook backup or Gmail.
My worry is, with Lion being such a god-awful Pig's Ear in so many more ways than this, that this Address Book mess might happen again.
I seem to have spent most of my time over the last month wrestling with the numerous problems that keep cropping up with Lion and getting little to show for it.
WARNING! FOOT-STAMPING WHINGE ABOUT LION - LOOK AWAY AND DOWN TO THE HOWLING FACES - IT WON'T BE ANYTHING THAT YOU HAVEN'T HEARD BEFORE:
I gave up on OSX when I tried Panther - that was dreadful - but was lured back by Tiger, have used Leopard very comfortably for about 5 years, had a very happy couple of months with Snow Leopard and now - this mess that is Lion! I have repaired OSX install permissions and "home user" permissions time and again, TinkerTooled it until I am blue in the face and it seems that every few days I manage to fix something and then almost immediately something else screws up. I can't upgrade to Mountain Lion on this machine and am seriously considering installing or running Linux as these problems with Lion are just never-ending - and then there are all the other stupid changes that have subsequently been sensibly reverted, mitigated or worked around in ML).
I have never bothered much with Address Book or Mail in the past as I have found them too limited. I have used either the Gmail web interface or Thunderbird. However, Gmail has started crashing my favourite browsers (Seamonkey and Firefox), Thunderbird has got just a bit too complicated and I cannot get Quicksilver to play ball with Gmail. The Lion version of Address Book is better than Gmail Contacts and Mail Smart Folders can emulate Gmail filters and labels - a huge improvement. So, just when these apps look good enough to be worth bothering with, they come part and parcel with what I have seen mocked, and rightly, as "Apple Vista"!
Sorry for that but I am about at the end of my tether with it all ;-/
I would be very grateful if anyone can offer any advice about:
1) That strange looking zero bytes file in the Address Book folder.
2) Whether the Address Book debug menu options might be of any help in this situation?
There seem to be lots of people having problems with Address Book in both Lion and Mountain Lion, if not exactly this issue, so maybe the answers will help others too.
Fingers crossed!
Ms Mousette
ps. In the product list to tick for this question they are grouped so I cannot specify that this is actually nothing to do with the iPhone. I have got a load of contacts on my iPhone too but I am not going to sync them until I have got this issue sorted out.

Could this font be the cause of the problem?
Possibly, since that font is not the one that Address Book uses and there is no method to specify or change the font used by Address Book. You could have recovered your Address Book contacts without syncing, so that could also be part of the problem. You should always make a keep a backup of your Address Book on your computer and in another safe location whenever you make any change to it.
May I ask why you haven't updated to 10.4.11 yet, as it provides various bug fixes and security enhancements?
Mulder

HT4314 There is a defect in SpellTower. I was in the middle of a game of Puzzle Mode on my iPhone and had passed the 63,000 point level. The game then disappeared without any record. My wife had a similar problem on her iPad in Tower mode. Fibonacci44

Has anyone else had the following problem with Spell Tower? I was in the middle of a game in Puzzle mode on my iPhone and had passed the 63,000 point mark. I paused the game (as I had many times before). When I tried to resume the game, the game had vanished without any record. My wife had a similar problem in Tower Mode. In addition, the Apple support page says that, to report an issue, one should click on a specified link at the bottom of the information page for the App in question. There is no such link on the SpellTower information page. Fibonacci44

There are two separate issues here.
1. There is a potential problem with the game Spelltower. That needs to be discussed directly with Spelltower. My attempted emails to Spelltower have been bounced.
2. Apple, on its own webpage, purports to establish a procedure for reporting an issue with an app. But that procedure does not work with Spelltower because someone at Apple neglected to include a link on the relevant information page. I have been trying to find that contact info without success. Apple should take ownership of supplying that contact info.

Render Service Problem - Root Cause ALC-DSC-127-000

I have decided to write a Form Guide renderer instead of using one from the Samples. The renderer process was created by carefully observing the one in the samples. After creating the renderer, I activated it and used it in my process. In the livecycle workspace, when I try to access the initialization task, A popup error shows up. Looking at the logs revealed the following error/exception:
exception: flex.messaging.MessageException: ALC-WKS-005-028: A problem occurred in the Render Service. Please review the render orchestration for this process.
2007-12-26 13:34:23,190 INFO [STDOUT] [Flex] Exception when invoking service: remoting-service
with message: Flex Message (flex.messaging.messages.RemotingMessage)
operation = render
clientId = 60F1A10E-C009-251A-6C47-179779FEB2B7
destination = task-actions
messageId = F65756D8-8D22-85D3-598E-17BBDA529B7E
timestamp = 1198694062784
timeToLive = 1198694062784
body = null
hdr(DSEndpoint) = workspace-polling-amf
hdr(DSId) = 60F1373F-590F-5AC8-B6A5-1296C747EA45
exception: flex.messaging.MessageException: ALC-WKS-005-028: A problem occurred in the Render Service. Please review the render orchestration for this process.
2007-12-26 13:34:23,377 INFO [STDOUT] [Flex] [ERROR] Root cause: ALC-DSC-127-000: com.adobe.idp.dsc.LongLivedInvocationException: The Long Lived Service i3Renderer can not be invoked synchronously.
at com.adobe.idp.dsc.routing.Router.routeRequest(Router.java:76)
at com.adobe.idp.dsc.provider.impl.base.AbstractMessageReceiver.routeMessage(AbstractMessage Receiver.java:88)
at com.adobe.idp.dsc.provider.impl.vm.VMMessageDispatcher.doSend(VMMessageDispatcher.java:21 0)
at com.adobe.idp.dsc.provider.impl.base.AbstractMessageDispatcher.send(AbstractMessageDispat cher.java:57)
at com.adobe.idp.dsc.clientsdk.ServiceClient.invoke(ServiceClient.java:208)
at com.adobe.idp.taskmanager.dsc.service.TaskManagerServiceImpl.renderForm(TaskManagerServic eImpl.java:3404)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at com.adobe.idp.dsc.component.impl.DefaultPOJOInvokerImpl.invoke(DefaultPOJOInvokerImpl.jav a:181)
at com.adobe.idp.dsc.interceptor.impl.InvocationInterceptor.intercept(InvocationInterceptor. java:134)
at com.adobe.idp.dsc.interceptor.impl.RequestInterceptorChainImpl.proceed(RequestInterceptor ChainImpl.java:44)
at com.adobe.idp.dsc.transaction.interceptor.TransactionInterceptor$1.doInTransaction(Transa ctionInterceptor.java:74)
at com.adobe.idp.dsc.transaction.impl.ejb.adapter.EjbTransactionCMTAdapterBean.execute(EjbTr ansactionCMTAdapterBean.java:336)
at com.adobe.idp.dsc.transaction.impl.ejb.adapter.EjbTransactionCMTAdapterBean.doRequiresNew (EjbTransactionCMTAdapterBean.java:282)
at sun.reflect.GeneratedMethodAccessor258.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at org.jboss.invocation.Invocation.performCall(Invocation.java:345)
at org.jboss.ejb.StatelessSessionContainer$ContainerInterceptor.invoke(StatelessSessionConta iner.java:214)
at org.jboss.resource.connectionmanager.CachedConnectionInterceptor.invoke(CachedConnectionI nterceptor.java:149)
at org.jboss.ejb.plugins.StatelessSessionInstanceInterceptor.invoke(StatelessSessionInstance Interceptor.java:154)
at org.jboss.webservice.server.ServiceEndpointInterceptor.invoke(ServiceEndpointInterceptor. java:54)
at org.jboss.ejb.plugins.CallValidationInterceptor.invoke(CallValidationInterceptor.java:48)
at org.jboss.ejb.plugins.AbstractTxInterceptor.invokeNext(AbstractTxInterceptor.java:106)
at org.jboss.ejb.plugins.TxInterceptorCMT.runWithTransactions(TxInterceptorCMT.java:

Hi Gary,
I am getting following error message, can you pls help me with this
Mar 26, 2008 5:25:53 PM com.adobe.workspace.processes.ProcessActions getProcessInstance
WARNING: ALC-WKS-005-059: An error occurred while retrieving the list of process instances for process "Process Packages".
[Flex] Exception when invoking service: remoting-service
with message: Flex Message (flex.messaging.messages.RemotingMessage)
operation = getProcessInstance
clientId = DA923519-C11F-EDFE-A537-D10A27A3FA00
destination = process-actions
messageId = A9726928-7AEA-8308-B7C4-ECFB90EFA472
timestamp = 1206566753361
timeToLive = 1206566753361
body = null
hdr(DSEndpoint) = workspace-polling-amf
hdr(DSId) = DA8DF62D-CD1E-2718-618C-0902E3DF178A
exception: flex.messaging.MessageException: ALC-WKS-005-059: An error occurred while retrieving the list of process instances for process "Process Packages".
[Flex] [ERROR] Exception when invoking service: remoting-service
with message: Flex Message (flex.messaging.messages.RemotingMessage)
operation = getProcessInstance
clientId = DA923519-C11F-EDFE-A537-D10A27A3FA00
destination = process-actions
messageId = A9726928-7AEA-8308-B7C4-ECFB90EFA472
timestamp = 1206566753361
timeToLive = 1206566753361
body = null
hdr(DSEndpoint) = workspace-polling-amf
hdr(DSId) = DA8DF62D-CD1E-2718-618C-0902E3DF178A
exception: flex.messaging.MessageException: ALC-WKS-005-059: An error occurred while retrieving the list of process instances for process "Process Packages".
[Flex] Root cause: com.adobe.idp.taskmanager.dsc.client.query.TaskQueryServiceException: com.adobe.pof.schema.AttributeNotFoundException: Attribute: creator_id does not exist on object-type: workflow.pt_process packages.
at com.adobe.idp.taskmanager.dsc.queryservice.TaskManagerQueryServiceImpl.processSearch(Task ManagerQueryServiceImpl.java:730)
at jrockit.reflect.VirtualNativeMethodInvoker.invoke(Unknown Source)
at java.lang.reflect.Method.invoke(Unknown Source)
at com.adobe.idp.dsc.component.impl.DefaultPOJOInvokerImpl.invoke(DefaultPOJOInvokerImpl.jav a:181)
at com.adobe.idp.dsc.interceptor.impl.InvocationInterceptor.intercept(InvocationInterceptor. java:134)
at com.adobe.idp.dsc.interceptor.impl.RequestInterceptorChainImpl.proceed(RequestInterceptor ChainImpl.java:44)
at com.adobe.idp.dsc.transaction.interceptor.TransactionInterceptor$1.doInTransaction(Transa ctionInterceptor.java:74)
at com.adobe.idp.dsc.transaction.impl.ejb.adapter.EjbTransactionCMTAdapterBean.execute(EjbTr ansactionCMTAdapterBean.java:336)
at com.adobe.idp.dsc.transaction.impl.ejb.adapter.EjbTransactionCMTAdapterBean.doSupports(Ej bTransactionCMTAdapterBean.java:212)
at com.adobe.idp.dsc.transaction.impl.ejb.adapter.EjbTransactionCMTAdapter_z73hg_ELOImpl.doS upports(EjbTransactionCMTAdapter_z73hg_ELOImpl.java:67)
at com.adobe.idp.dsc.transaction.impl.ejb.EjbTransactionProvider.execute(EjbTransactionProvi der.java:104)
at com.adobe.idp.dsc.transaction.interceptor.TransactionInterceptor.intercept(TransactionInt erceptor.java:72)
at com.adobe.idp.dsc.interceptor.impl.RequestInterceptorChainImpl.proceed(RequestInterceptor ChainImpl.java:44)
at com.adobe.idp.dsc.interceptor.impl.InvalidStateInterceptor.intercept(InvalidStateIntercep tor.java:37)
at com.adobe.idp.dsc.interceptor.impl.RequestInterceptorChainImpl.proceed(RequestInterceptor ChainImpl.java:44)
at com.adobe.idp.dsc.interceptor.impl.AuthorizationInterceptor.intercept(AuthorizationInterc eptor.java:80)
at com.adobe.idp.dsc.interceptor.impl.RequestInterceptorChainImpl.proceed(RequestInterceptor ChainImpl.java:44)
at com.adobe.idp.dsc.engine.impl.ServiceEngineImpl.invoke(ServiceEngineImpl.java:113)
at com.adobe.idp.dsc.routing.Router.routeRequest(Router.java:102)
at com.adobe.idp.dsc.provider.impl.base.AbstractMessageReceiver.routeMessage(AbstractMessage Receiver.java:88)
at com.adobe.idp.dsc.provider.impl.vm.VMMessageDispatcher.doSend(VMMessageDispatcher.java:18 3)
at com.adobe.idp.dsc.provider.impl.base.AbstractMessageDispatcher.send(AbstractMessageDispat cher.java:57)
at com.adobe.idp.dsc.clientsdk.ServiceClient.invoke(ServiceClient.java:208)
at com.adobe.idp.taskmanager.dsc.client.TypedTaskManagerQueryService.processSearch(TypedTask ManagerQueryService.java:245)
at com.adobe.workspace.processes.ProcessActions.getProcessInstance(ProcessActions.java:174)
at jrockit.reflect.VirtualNativeMethodInvoker.invoke(Unknown Source)
Caused by: com.adobe.pof.schema.AttributeNotFoundException: Attribute: creator_id does not exist on object-type: workflow.pt_process packages.
at com.adobe.pof.schema.POFAbstractObjectType.getAttribute(POFAbstractObjectType.java:177)
at com.adobe.pof.omapi.POFDefaultQuery.projectAttribute(POFDefaultQuery.java:634)
at com.adobe.idp.taskmanager.dsc.queryservice.TaskManagerQueryServiceImpl.processSearch(Task ManagerQueryServiceImpl.java:627)
at jrockit.reflect.VirtualNativeMethodInvoker.invoke(Unknown Source)
at java.lang.reflect.Method.invoke(Unknown Source)
at com.adobe.idp.dsc.component.impl.DefaultPOJOInvokerImpl.invoke(DefaultPOJOInvokerImpl.jav a:181)
at com.adobe.idp.dsc.interceptor.impl.InvocationInterceptor.intercept(InvocationInterceptor. java:134)
at com.adobe.idp.dsc.interceptor.impl.RequestInterceptorChainImpl.proceed(RequestInterceptor ChainImpl.java:44)
at com.adobe.idp.dsc.transaction.interceptor.TransactionInterceptor$1.doInTransaction(Transa ctionInterceptor.java:74)
at com.adobe.idp.dsc.transaction.impl.ejb.adapter.EjbTransactionCMTAdapterBean.execute(EjbTr ansactionCMTAdapterBean.java:336)
at com.adobe.idp.dsc.transaction.impl.ejb.adapter.EjbTransactionCMTAdapterBean.doSupports(Ej bTransactionCMTAdapterBean.java:212)
at com.adobe.idp.dsc.transaction.impl.ejb.adapter.EjbTransactionCMTAdapter_z73hg_ELOImpl.doS upports(EjbTransactionCMTAdapter_z73hg_ELOImpl.java:67)
at com.adobe.idp.dsc.transaction.impl.ejb.EjbTransactionProvider.execute(EjbTransactionProvi der.java:104)
at com.adobe.idp.dsc.transaction.interceptor.TransactionInterceptor.intercept(TransactionInt erceptor.java:72)
at com.adobe.idp.dsc.interceptor.impl.RequestInterceptorChainImpl.proceed(RequestInterceptor ChainImpl.java:44)
at com.adobe.idp.dsc.interceptor.impl.InvalidStateInterceptor.intercept(InvalidStateIntercep tor.java:37)
at com.adobe.idp.dsc.interceptor.impl.RequestInterceptorChainImpl.proceed(RequestInterceptor ChainImpl.java:44)
at com.adobe.idp.dsc.interceptor.impl.AuthorizationInterceptor.intercept(AuthorizationInterc eptor.java:80)
at com.adobe.idp.dsc.interceptor.impl.RequestInterceptorChainImpl.proceed(RequestInterceptor ChainImpl.java:44)
at com.adobe.idp.dsc.engine.impl.ServiceEngineImpl.invoke(ServiceEngineImpl.java:113)
at com.adobe.idp.dsc.routing.Router.routeRequest(Router.java:102)
at com.adobe.idp.dsc.provider.impl.base.AbstractMessageReceiver.routeMessage(AbstractMessage Receiver.java:88)
at com.adobe.idp.dsc.provider.impl.vm.VMMessageDispatcher.doSend(VMMessageDispatcher.java:18 3)
at com.adobe.idp.dsc.provider.impl.base.AbstractMessageDispatcher.send(AbstractMessageDispat cher.java:57)
at com.adobe.idp.dsc.clientsdk.ServiceClient.invoke(ServiceClient.java:208)
at com.adobe.idp.taskmanager.dsc.client.TypedTaskManagerQueryService.processSearch(TypedTask ManagerQueryService.java:245)
at com.adobe.workspace.processes.ProcessActions.getProcessInstance(ProcessActions.java:174)
[Flex] [ERROR] Root cause: com.adobe.idp.taskmanager.dsc.client.query.TaskQueryServiceException: com.adobe.pof.schema.AttributeNotFoundException: Attribute: creator_id does not exist on object-type: workflow.pt_process packages.
at com.adobe.idp.taskmanager.dsc.queryservice.TaskManagerQueryServiceImpl.processSearch(Task ManagerQueryServiceImpl.java:730)
at jrockit.reflect.VirtualNativeMethodInvoker.invoke(Unknown Source)
at java.lang.reflect.Method.invoke(Unknown Source)
at com.ad

Gapless problem starts after 15,000 songs

I installed the initial release of iTunes 7 and also the latest update and my system crashes after the gapless song review gets above 15,000 songs. I can restart iTunes, but it crashes again. I've reinstalled the program several times and it crashes at the same point. Initially I thought it was due to the songs at that location so I removed them, but it still occurs.
I have no problem installing the program. I am running Windows XP Pro SP2 with 2 GB RAM on a 3 GHz Pentium 4 with tons of HD space.
Is there a way to turn off gapless?
Thanks for any help.

Actually, I forgot to mention that along with turning off Crossfade for good...I trashed all libraries, and plists, Helpfiles.....anything that was in the realm of application re-write. Some of these kind of files stay even when a new version is installed and they are not needed. iTunes 7 seems very stuck up and doesn't like to mix with the older crowd.
It helps correct other docs and apps...thought I'd give it a try. Certainly can't hurt. Can't listen to my tunes anyway. Seems to me a similar scenario occured with a new pre Tiger (or was it Jaguar.... it was furry annyway) version of iTunes.
Thanks for the reply. Why should I spend any time at all fixing anything at all. I need the time to work..make money... to pay for my Mac.

I am having problems importing my Iphoto pics into new Photo programme. I am inporting approx 11,000 pics that all seem fine in Iphoto but the iport rejects around 7,000 of them with incorrect mete data. What can I do to import these?

I am having problems importing my I photo pics into new Photo programme. I am importing approx 11,000 pics that all seem fine in I photo but the import rejects around 7,000 of them with incorrect mete data. What can I do to import these?

I have the same problem.
Thread here: Import fails - "Unable to get metadata"

For some strange reason the songs in my library are multiplying. For example, I really only have 4,000 songs but every time I open itunes I have 6,8,10,000 songs! Any one else have this problem. How do I stop that from happening?

For some strange reason the songs in my library are multiplying. For example, I really only have 4,000 songs but every time I open itunes I have 6,8,10,000 songs! Any one else have this problem. How do I stop that from happening? I keep having to delete my library!

This "original file cannot be found" thing happens if the file is no longer where iTunes expects to find it. Possible causes are that you or some third party tool has moved, renamed or deleted the file, or that the drive it lives on has had a change of drive letter. It is also possible that iTunes has changed from expecting the files to be in the pre-iTunes 9 layout to post-iTunes 9 layout,or vice-versa, and so is looking in slightly the wrong place.
Select a track with an exclamation mark, use Ctrl-I to get info, then cancel when asked to try to locate the track. Look on the summary tab for the location that iTunes thinks the file should be. Now take a look around your hard drive(s). Hopefully you can locate the track in question. If a section of your library has simply been moved, or a drive letter has changed, it should be possible to reverse the actions.
Alternatively, as long as you can find a location holding the missing files, then you should be able to use my FindTracks script to reconnect them to iTunes .
tt2

Conversion Problem in Unit of measure 1PAC=100,000 EA

Hi Experts,
I am facing the problem in conversion of Unit of Measures.
If some material has the conversion unit when we order to Vendor.
The Unit of measure is EA, the Order unit is PAC.
The conversion is 1PAC=100,000 EA
But the System is allowing as 1PAC=10,000 EA only and it is not allowing to enter 100,000 EA and throughing the error
Entry too long (enter in the format __,___)
Message no. 00089
How can we increase the characters of the Unit of measure. Like this we have some 50 Materials, I need to increase the length of the conversion spaces. How to do it, Please guide me.
rgds
Swamy

Hi
you can check this out the denominator factor is Stored in structure - SMEINH - field UMREN.
Best option is to maintain decimal place for the UOM , which is more easier to mainatin.
Even if you go through the note the same is explained. Please read below for Too large numerators and denominators
When 120000 CM3 = 0,2 tons (TO), you can no longer save numerator and denominator of conversion ratio 600000 CM3 = 1 TO as numerator and denominator may have maximally five digits.
Here, you must either select a larger volume unit or a smaller unit of weight: With DM3 the conversion ratio would be 600 DM3 = 1 TO, with KG the conversion ratio would be 600 CM3 = 1 KG.
Generally, the alternative units of measure and the base unit of measure should result in quantities that are in the same dimension since the conversion factors may not be larger than 99999/1 and not smaller than 1/99999.
Thanks & Regards
KK
Edited by: Kishore Kumar Chiluka on Apr 22, 2008 8:25 AM

Performance problem: 1.000 queries over a 1.000.000 rows table

Hi everybody!
I have a difficult performance problem: I use JDBC over an ORACLE database. I need to build a map using data from a table with around 1.000.000 rows. My query is very simple (see the code) and takes an average of 900 milliseconds, but I must perform around 1.000 queries with different parameters. The final result is that user must wait several minutes (plus the time needed to draw the map and send it to the client)
The code, very simplified, is the following:
String sSQLCreateView =
"CREATE VIEW " + sViewName + " AS " +
"SELECT RIGHT_ASCENSION, DECLINATION " +
"FROM T_EXO_TARGETS " +
"WHERE (RIGHT_ASCENSION BETWEEN " + dRaMin + " AND " + dRaMax + ") " +
"AND (DECLINATION BETWEEN " + dDecMin + " AND " + dDecMax + ")";
String sSQLSentence =
"SELECT COUNT(*) FROM " + sViewName +
" WHERE (RIGHT_ASCENSION BETWEEN ? AND ?) " +
"AND (DECLINATION BETWEEN ? AND ?)";
PreparedStatement pstmt = in_oDbConnection.prepareStatement(sSQLSentence);
for (int i = 0; i < 1000; i++)
pstmt.setDouble(1, a);
pstmt.setDouble(2, b);
pstmt.setDouble(3, c);
pstmt.setDouble(4, d);
ResultSet rset = pstmt.executeQuery();
X = rset.getInt(1);
I have yet created index with RIGHT_ASCENSION and DECLINATION fields (trying different combinations).
I have tried yet multi-threads, with very bad results
Has anybody a suggestion ?
Thank you very much!

How many total rows are there likely to be in the View you create?
Perhaps just do a select instead of a view, and loop thru the resultset totalling the ranges in java instead of trying to have 1000 queries do the job. Something like:
int     iMaxRanges = 1000;
int     iCount[] = new int[iMaxRanges];
class Range implements Comparable
     float fAMIN;
     float fAMAX;
     float fDMIN;
     float fDMAX;
     float fDelta;
     public Range(float fASC_MIN, float fASC_MAX, float fDEC_MIN, float fDEC_MAX)
          fAMIN = fASC_MIN;
          fAMAX = fASC_MAX;
          fDMIN = fDEC_MIN;
          fDMAX = fDEC_MAX;
     public int compareTo(Object range)
          Range     comp = (Range)range;
          if (fAMIN < comp.fAMIN)
               return -1;
          if (fAMAX > comp.fAMAX)
               return 1;
          if (fDMIN < comp.fDMIN)
               return -1;
          if (fDMAX > comp.fDMAX)
               return 1;
          return 0;
List     listRanges = new ArrayList(iMaxRanges);
listRanges.add(new Range(1.05, 1.10, 120.5, 121.5));
//...etc.
String sSQL =
"SELECT RIGHT_ASCENSION, DECLINATION FROM T_EXO_TARGETS " +
"WHERE (RIGHT_ASCENSION BETWEEN " + dRaMin + " AND " + dRaMax + ") " +
"AND (DECLINATION BETWEEN " + dDecMin + " AND " + dDecMax + ")";
Statement stmt = in_oDbConnection.createStatement();
ResultSet rset = stmt.executeQuery(sSQL);
while (rset.next())
     float fASC = rset.getFloat("RIGHT_ASCENSION");
     flaot fDEC = rset.getFloat("DECLINATION");
     int iRange = Collections.binarySearch(listRanges, new Range(fASC, fASC, fDEC, fDEC));
     if (iRange >= 0)
          ++iCount[iRange];

'000' problem

Similar Messages

Maybe you are looking for