0000 on the end of a subTexture name in the sprite sheet generator

How can I get rid of the 0000 on the end of a subTexture name in the .xml atlas file created sprite sheet generator? (I'm using the Sparrow v2 option) is there anyway to stop that form being tacked on?
Thanks for any help.

Hi Terry,
You mentioned DNS servers. I see a DNS tab in the Network settings control panel. Right now there is a single IP address in the DNS Servers list. But just about everything in this control panel is mumbo jumbo to me. I know barely enough to keep myself operational, but I'm often hesitant to monkey around in there. I'm happy to listen, however, if you want to clarify further.
DNS is the system that converts the human-readable web addresses into things (namely the IP address) that computers can use to find the other computers out there on the internet. Think of it as being like a phonebook - say you need to call Bob, you'd check the phonebook to find out his number to call him.
So, for example:
- say you type www.apple.com into the web browser
- the browser then makes a request to the DNS asking for the location of the Apple web server (it's IP address)
- the browser then uses this IP address to contact Apple and request the page
In Charter's case, when you type just 'apple', instead of their DNS servers returning that the address does not exist, they instead redirect you to their search pages instead.
So, if you specify different non-Charter DNS address (the ones I mentioned above are from Verizon), you should avoid the problem you are seeing. Make a note of your existing entry if you're worried about replacing it and then you can change it back should this not improve things.
Hope that makes more sense, but yell if not

Similar Messages

  • BUG: Extra characters at the end of attachment file names

    I received complaints that my attachments didn't open on the PC's of the recipients. After I saw the messages I noticed there were extra characters at the end of their file names. That's why they wouldn't open. When I looked into my sent mail folder it was there as well. The addition took place when I sent the mail, while composing everything looked fine. It took me a while to realize the pattern. There was one extra for every non-ASCII character in the file name.
    Apparently Mail.app is using two different libraries. The other one counts the non-ASCII characters as two while the other doesn't. I don't know whether Finder still uses MacRoman or Unicode, but this seems to relate to double-byte characters.
    The short term solution is to use only ASCII for file names, but that's not what OS X is all about.

    The class files are broken. Recompile them. If you're uploading them, doublecheck if the FTP program used doesn't do mad things with binary files.

  • When i open an irc link with a channel name that contains "~" at the end, firefox (14.0.1) opens the same channel name but with "%7E" instead of "~" at the end

    when i open an irc link with a channel name that contains "~" at the end firefox (14.0.1) opens the same channel name but with "%7E" instead of "~" at the end
    http://img835.imageshack.us/img835/2856/clipboard05nq.jpg

    I can not open the image, but I can say something in general about the tilde.<br>
    The tilde "~" is an unreserved character and therefore it can be replaced by its percent-encoded form "%7E" inside a URI without changing meaning. See<br>
    http://en.wikipedia.org/wiki/Percent-encoding<br>
    According to section 2.3 of RFC3986 we should prefer the unencoded form so this behavior seems to be a bit out-dated.<br>

  • I plugged my iphone in to my laptop to update it and the computer shut down right at the end. My phone now has the itunes symbol and an arrow asking me to plug my phone into itunes (I assume the laptop). It's frozen like that even when switched off

    I plugged my iphone in to my laptop to update it and the computer shut down right at the end. My phone now has the itunes symbol and an arrow asking me to plug my phone into itunes (I assume the laptop). It's frozen like that even when switched off. If I plug the connection into the laptop it's not recognising it now. HELP!

    Hello there, xkatiex255.
    The following Knowledge Base article should provide the steps for you to resolve your issue:
    iOS: Unable to update or restore
    http://support.apple.com/kb/HT1808
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • I have tried to download a movie via iTunes. Every time the download nears the end, it stops and restarts from the beginning. This has happened 5 times. Any solutions?

    I have tried to download a movie via iTunes. Every time the download nears the end, it stops and restarts from the beginning. This has happened 5 times. How can I clear the download or solve this?

    If it is a HD movie, it may not be enough. The iPad also need working space.
    Try download to iTune (computer) and "Move" to iPad.

  • How do I ungroup the pages in my doc, I need to move the first to the end, and it shows me all the pages are in a group

    On Pages:  I need to move the first page of my document to the end, and it shows me all the pages are in a group.  How do I ungroup the pages in my doc. 

    Hello there, linafrompereira.
    The following portion of the online Pages Help for Mac provides information on grouping items in Pages:
    Layer, group, and lock objects - Pages Help for Mac
    http://help.apple.com/pages/mac/5.2/#/tan5eab46568
    Group and ungroup objects
    Shift-click to select multiple objects.
    In the Arrange pane of the Format inspector, click Group (or choose Arrange > Group from the Arrange menu at the top of your computer screen).
    To ungroup an object, select it, then click Ungroup or choose Arrange > Ungroup.
    Tip: You can Control-click objects, then choose Group or Ungroup from the shortcut menu. You can also add these buttons to the toolbar: Group and Ungroup.
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • How do i launch Adobe Reader,accept the end user agreement,quit,and relaunch the browser?

    How do i launch Adobe Reader.accept the end user agreement,quit,and relaunch the browser?

    Find the Reader application (same place as all your other apps. Not sure where that is since we don't know your OS) and launch it.

  • HT204406 My iMatch is crashing every time is reaches the end of step #2 - checking all the songs in my iTunes library.  There are 4,389 songs to match, and when it reaches 4,388 songs checked and matched, it crashes and shuts downs iTunes altogether.

    My iMatch is crashing every time is reaches the end of step #2 - checking all the songs in my iTunes library.  There are 4,389 songs to match, and when it reaches 4,388 songs checked and matched, it crashes and shuts downs iTunes altogether.

    hi i had the same problem today when i updated my itunes to latest version. however, i have just found my songs in the 'itunes media' folder. this was accessed through 'my music'  then keep clicking through until you find itunes media and all my library songs were in there and i then just added these files to my library and all were restored however, i have lost all my playlists but at least my 700 songs are back. very dissapointed with apple that they have let this happen with their latest update, the previous version was miles better than this one . hope you find them. stevo

  • TS3938 The message "PowerPC applications are no longer supported" sounds like the end, not an interruption. Nevertheless the gaming world could use a wake up call. Is this really a solution?

    The message "PowerPC applications are no longer supported" sounds like the end, not an interruption. Nevertheless the gaming world could use a wake up call. Is this really a solution?

    Scot Lee wrote:
    The message "PowerPC applications are no longer supported" sounds like the end, not an interruption. Nevertheless the gaming world could use a wake up call. Is this really a solution?
    Yes Rosetta has been gone for over two years. You can always search here for how Michael Lax's instructions on how to run SL Server in a virtul environment, but I don't think it is too kind to gamers.
    Advice? Buy an old Mac that runs PPC software.
    Cheers
    Pete

  • I am having trouble fading out a song at the end of an iMovie.  Also, the volume of the song is too high...I would like it to be more background music?  I have tried everything and can't figure it out...Can anyone help me, Please!!??

    I am having trouble fading out a song at the end of an iMovie.  Also, the volume of the song is too high...I would like it to be more background music?  I have tried everything and can't figure it out...Can anyone help me, Please!!??

    Did you ever resolve the iCloud problem.I am in the same position and its driving me mad!!! If you have a link to an solution I would appreciate it.

  • When typin on facebook ipad, the end of my sentence goes to the front of the sentence, why?

    WHy does the end of my sentence jump to the front of sentence on ipad??

    You cannot, this most likely indicates a hardware or software problem. I am guessing that rebooting does not make it go away as it happens on startup. If you don't have red replacing black anywhere else, then a restore should fix it. Otherwise you want it repaired.

  • Sender File adapter - DataTime stamp at the end of aarchived file name

    Hello,
    I am archiving the file once PI file sender adapter picks the file from source directory.
    The file is archived in the archive directory as <Date-Time-SSS_>FileName.
    I need to append the value <Date-Time-SSS_> after the file name.
    So archived file looks like FileName_<Date-Time-SSS>
    How can I achieve this? Appreciate your help for valuable suggestions.
    Thanks,
    Namadev

    Hi Namdev,
    Generally when we archive file then in sender CC we just put the processing mode as Archive and specify the Archived directory name in Archive Directory section. in that case when the Communication channel pick the source file then after picking it it remove it from source directory and put it into Archived directory without making any change in the file name.
    so if the file name is A.txt then in Archived directory also its name will be A.txt . However if you want to make any change in the name of the source file in the archived directory then you have two write Unix or DOC scrpt( depending upon your soure server )
    if your source server is Unix then write shell script otherwise dos scriprt
    .after wrtting the shell script just place in the archived directory or your source directory and call it in by mentioning it in Coomand Line section of your sender CC. You can easily search and get the required  shell script .
    Regards,
    Saurabh

  • How to replace the end of a file name

    I have a seriously dumb question...
    I have a row of thousands of file names (top-down, row a), these names are, for example, "photo-1.jpg" and I need to change the .jpg to .nef. How can I accomplish this?
    thanks!!

    Or just use this 'Find Replace in Selection' Automator Service (Dropbox download) without having to fuss about taking columns out to another app, fiddling with them there, and bring them back in.
    It is just a short AppleScript that, after a quick installation, will look like this in your menu:
    Select the cells where you want to make the replacement, choose 'Find Replace in Selection' from the menu, and enter the find-replace values when prompted. In your case you will see something like this:
    Hit OK and you're done.
    One-time installation is just a doubleclick on the .workflow package.
    Depending on your settings you may have to go to System Preferences > Security & Privacy and click 'Open Anyway'.
    'Install' simply moves the script to your Library > Services folder so it will show up in your Numbers menu.  It doesn't do anything to the innards of your computer.  If you want, you can check out the script first by choosing 'Open with Automator'.
    Since this (obviously) changes values in your document you might want to test it first to make sure it is working as you want.
    If you need to get rid of it then in Finder hold down the option key, choose Go in the menu and navigate to Library > Services, where you can trash it the way you would any other file or package in Finder.
    SG
    Edit: use jpg and nef rather than .jpg and .nef.

  • I am trying to update a number of items which the software check brings up:      It runs and says it is installing but at the end I get this error message:    The update could not be expanded, and may have been corrupted during downloading. The update wil

    Hi,
    I am trying to update a number of items which the software check brings up:
    It runs and says it is installing but at the end I get this error message:
    BUT then I ge tthis:
    Can anyone help me to enable the software to update?
    Thanks

    Thanks.  Something isn't right as I just tried to download the iphoto update - it said it had competed the download but then when I clicked on the download item I get this:
    Think will have to take it into the store.....
    thanks for replying.

  • How to drag the end of two text objects at the same time

    I have two seperate bits of text in a particular section of video. If I select the two text objects and drag the end left or right it only moves one. I I want to be able to drag the end of multiple things at the same time.
    I may be being dumb but cant find how to do it. Any solutions gratefully received.
    Best
    Tom B.

    Two stacked separate title clips or two text text boxes in a single clip?
    Russ

Maybe you are looking for