0002-Status Single,NM shouldn't trigger Spouse,Children in 0021

Hi Seniors,
I want to controll the movement of 0021-spouse & children details for employee marked as Single or Never Married,
The system should only populate Father,Mother,Guardian details for Single & Never Married status but should continue with
Spouse,Children,Father,Mother and Guardian details with status married.
I have tried with the dynamic actions-T588Z for 0002 to control 0021 but till now it is of no use.
Can any body guide me on this further.
Edited by: srssaphr09 on May 2, 2011 8:04 AM

Hi,
This scenario can be achieved by dynamic action itself. If you are sure it is not working than, you can try User Exit: PBAS0001 and Function module exit: EXIT_SAPFP50M_001 to write the logic.
Regards
Chandrashekar

Similar Messages

Additional contact data not syncing: photos, birthday, spouse/children..

I'm using a 2nd gen Nano with iTunes 7.3.2 (Mac OS).
The iPod software version is 1.1.3, Windows formatted.
I'm syncing Address Book contacts (box is checked in the Contacts tab of iTunes) but additional & exisiting contact data in Address Book is missing on the iPod:
e.g. photo, birthdays/anniversaries, spouse/children info, etc.
However the Notes field is synced okay.
The following post is relevant but also unsolved http://discussions.apple.com/thread.jspa?messageID=4587988&#4587988
And this one is kind of relevant too http://discussions.apple.com/thread.jspa?messageID=5012889&#5012889
So:
- Maybe the contacts photos are only for 5th Gen iPodders - see http://docs.info.apple.com/article.html?artnum=302493 ? And if this is the case, is there a hack/fix for the Nano?
- And in any case what about syncing the rest of the data?
Hope someone can resolve this (or simply come up with a definitive answer). Thanks.

I know that a windows formatted ipod would work on the mac. But why do you have it formated for a windows when you own a powerbook???
Yes, the contact photo is only for the 5th gen ipod and not the nano. No there is no hack to allow this to occur. And also realize any hack used on the ipod WILL void your warranty.
Regardless of your links (first link is for a 1st gen nano) do you own a 1st or 2nd gen nano???? You cannot sync the name of a spouse/child or any other name within a contact to the nano. I have tried this myself and cannot find any preferences or way of allowing this to occur. Just like I cannot sync my contact which has names and a second address to my nano.
Remember there is no hack for this to occur. If you wish for this feature to be present on the nano then please feedback at the link below.
http://www.apple.com/feedback/ipod.html
GFF

How to capture the status of a transaction to trigger the workflow

Hi,
I want to trigger the workflow whenever the user changes the status.How can i capture the status.I gone through some forms,there it has mentioned that with the help of SWEL transaction we can find the status,but we can trace the events with that,I want to trace the status.How can i acheive that.
Thanks & Regards,
Asmitha.

Hi,
im using the SAP R/3 4.6C and trying to launch automatic trigger upon BO FIPP post method. I have configured Instance and Type Linkages but nothing ever happens. Whereas i tried this in SAP IDES and it was working fine.
What is or could be the problem?
Best regards
Laurynas

Question-DAQmx: Using multiple channels on a single device with a trigger

The purpose of the attached VI (Switching_Controller.vi) is to wait for a trigger signal from the input and output a pulse whenever it occurs. However, at the same time I want to output and read a single sample from another input and output channel pair (behavior in Main_Controller.vi). I was planning on doing this in two parallel subvi's but I am running into the common error -50103, "specified resource is reserved". I understand that in order to address this issue I need to compress all output channels and all input channels into just two tasks. However, I am having trouble addressing the issue of the trigger, since I want the second set of inputs and outputs to happen continuously and the trigger forces the task to a certain rate of repetition. Is there any way to run a multichannel task in two parallel subvi's?
Thanks in advance for the insight.
Solved!
Go to Solution.
Attachments:
Switching_Controller.vi ‏36 KB
Main_Controller.vi ‏20 KB

Hello!
Take a look at the attached screen shot. I wrote a small (and very simple) example that I think you'll be able to modify for your needs. Basically, we can use the start task to avoid getting resources reserved and break the task apart so that we write 1 sample on n channels and then write a waveform on a another channel.
You will notice that I needed to enable the "autostart" function of the DAQmx write for the waveform data by writing a true constant to the vi. This way, the vi will start on its own with a start vi.
Hope this helps!
Regards,
Margaret Barrett
National Instruments
Applications Engineer
Digital Multimeters and LCR Meters
Attachments:
multi-channel.png ‏24 KB

Status of report in afterreport trigger

Hi, i need help.
I like to mark as printed some lines, when the reports finish OK.
After reports always fires, whether or not your report completed successfully
How can i know if the reports fails in after reports trigger.??
Thanks very much.

Hi rajendra,
Which data you want , you want user's data or object related data , for user data you will get it from USR01 , for object related data you will get it from TADIR table, Anything else?
or You want to know in which table program data is being created or modified or selected?
even that cab be seen in SM50 at the last column.
Thanks
RK
Edited by: RK on Nov 13, 2008 2:52 PM

Don't want spouse & children to appear on address label

I'm trying to print mailing labels from Address Book. Unless I have the "Company" box checked, Address Book is putting the spouse & all the childrens names along side the adult name on the first line of the address label. How do I stop these names from appearing on my address labels and just have the single adult name appear?
Here is an example of what is being printed:
Jane Smith, Tim, Susan and Harry
101 Cedar Way
Austin, TX 89765
I want the label to look like this:
Jane Smith
101 Cedar Way
Austin, TX 89765

And I am having the opposite problem! (I want the spouse and children names to print, as AB used to work.)
Here is the KB article that discusses this:
http://support.apple.com/kb/HT3952
Since your post indicates you are on 10.5.8 then AB works the way you describe. You will see that, starting with 10.6, it works the way you want it do (but no longer the way I was counting on!!)
Other than modifying the "name" field to be a compound name (which I do not want, in general, for all my contacts), does anyone know how to get the "new & improved" Address Book to print labels for a "holiday" mailing, without distorting the entries for the more general use throughout the year. Ugh!
Or, does anyone have a different label printing app that works better ... works the way Address Book used to work?

Spouse, Children fields from Outlook - syncing, but not displayed

I discovered something rather curious, and am wondering if anyone has any more information about this.
I use the Children and Spouse fields in my Outlook records. When I sync to iPhone, these fields are not shown. However, if I choose to "share a contact", it sends a vCard, which does include these fields! So the iPhone is clearly copying it over, but not displaying it? What's the point of that? I can understand a reluctance to make some fields uneditable, but storing them without displaying them?
Also of note: the vCard does not include the Anniversary field, even though it does sync this and includes other fields in the vCard like Birthday. That looks like a bug to me. Anyone care to confirm?
Thanks,
Keith

Hi,
It depends what you require...suppose in the multiprovider you want the filed from the ODS then you should select the fiel from the ODS but if you want the filed to get the value from the navigational attribute then you should go fro the navigation attribute in the options.
Navigation attribute will show up in the left if you have made them navigation in the cube as well.
identification gives you an option to map the the multiprovoder fileds with the fields of the underlying infoproviders.....if you go for create recoomendations then it will chose the optimal mapping that is one to one mapping.....A to A etc...but in certain case you want A to map to B such as in sone cases shipt-to-party can take data from sold-to-party....depends upon the requirement.
The options in the left gives you the char which will show up in the query and by selecting the char from the right from different inforproviders you actually defeine which filed from the infoproviders it should take data from.
So just make sure that all the fields in the right which are going to show up in the query should get have the identiication from the different infoproviders and there respective char....a navigation mapped to a navigation....and a direct char to a direct char from the infoprovider.
Hope it explains.
Thanks

Workflow - based on idoc status workflow have to trigger

hi, i generating IDOC using abap program, when i generated IDOC workflow triggering, my recruiment is based on IDOC status
workflow have to trigger, eg success status 30 means mail have to go one person, if fail means mail as to go another person. I trying for last two days any one can help me.

Hi Rajendra,
You need to trigger workflow only if u require any approval/Rejection.
If you just need to send a mail on idoc status 30 or fail status, u need not to trigger workflow.
You can do it with the help of standard FM also. Just search by putting Mail or sendmail* in t-code SE37, you will surely get an relevant FM which you can use in Condition of Status of idoc.
Hope it will help u.
Regards
Nitin

Trigger status not changing..

Guys,
Friend of mine is up with a problem that the status of the trigger refuses to change to 'ENABLED'.
Plz help.
SQL> alter trigger TU_T_DRF_INT_UIAUDIT enable
2 /
Trigger altered.
SQL> select TRIGGER_NAME ,status from user_triggers
where trigger_name='TU_T_DRF_INT_UIAUDIT'
TRIGGER_NAME STATUS
TU_T_DRF_INT_UIAUDIT DISABLED

That just work fine ojn my 10.2.0.3 :
SQL> select trigger_name, status from user_triggers where trigger_name = 'TRGTT'
SQL> /
TRIGGER_NAME                   STATUS
TRGTT                          ENABLED
SQL> alter trigger trgtt disable;
Trigger altered.
SQL> select trigger_name, status from user_triggers where trigger_name = 'TRGTT'
2 /
TRIGGER_NAME                   STATUS
TRGTT                          DISABLED
SQL> alter trigger trgtt enable;
Trigger altered.
SQL> select trigger_name, status from user_triggers where trigger_name = 'TRGTT'
2 /
TRIGGER_NAME                   STATUS
TRGTT                          ENABLED
SQL> Nicolas.

Single image by one hardware trigger

I am using Basler Camera Gige vision sca640-70gc with real time EVS and vision builder i use MAX for putting camera settings. when i put settings of camera as mentioned in the manual to get single image per hardware trigger it gives me time out error.
hardware trigger comes every 3.5 second what camera acquisition control settings i have to use to get the desired result?and what is more setting i have to put in my consideration.

Hi frank
I think you are facing a bit troubles please ensure these things
1.Put your camera in hardware trigger mode.
2.Set your timeout period too long.
3.In acquisition mode select the continuous immediate mode (You will get only one image when the camera triggers).
4.If you getting more images its because of your camera triggers.
I think this will help you...
Sasi.
Certified LabVIEW Associate Developer
If you can DREAM it, You can DO it - Walt Disney

Exit for CJ20N where system status changes can be captured

Hi Experts,
I need exit for CJ20N where system status changes can be captured
for both the below cases
1) When WBS Element is having Networks inside it
2) when WBS Element is having no networks inside it
EXIT_SAPLCOBT_001 --->>> ZXCO1U01 , will work for 1) , but not for 2)
i want an exit where status change gets captured for both cases 1 and 2 and
will do further processing according to client needs based on status change
Need to trigger IDOC on status change of WBS element.
If WBS is having network inside it , then network status changes also with WBS status change
and IDOC should trigger for WBS also.
I just want suitable exit / place for coding . Rest i can do.
if no suitable exit / BADI , then what is the best possible place where i can go for Implicit Enhancement
Best Regards,
Gaurav
Edited by: TheGaurav on Oct 25, 2011 7:08 AM
Edited by: TheGaurav on Oct 25, 2011 7:12 AM

I am kind of stuck in a similar issue. I need to perform custom validations on standard fields which cannot be done through OPSI or OPUC transactions. 0007 or 0002 User exits seem to assist on custom field creations/validations. However, I do see people posting the following BADIs which may be useful.
CO_SRULE_CHECK
PROJECTDEF_UPDATE
WORKBREAKDOWN_UPDATE (which you already tried)
WBS_FIELDS_FOR_ASSET
CO_SRULE_CDOC
Let me know if any of these worked out...
AN

How to use update trigger in sql server 2008 with specific column

Hello friends currently my trigger updates on table update, and I need to change this to only fire when specific column changes.
/****** Object: Table [dbo].[User_Detail] ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
CREATE TABLE [dbo].[User_Detail](
[sno] [int] IDENTITY(1,1) NOT NULL,
[userid] [nvarchar](50) NULL,
[name] [nvarchar](max) NULL,
[jointype] [nvarchar](50) NULL,
[joinside] [nvarchar](50) NULL,
[lleg] [nvarchar](50) NULL,
[rleg] [nvarchar](50) NULL,
[ljoining] [int] NULL,
[rjoining] [int] NULL,
[pair] [int] NULL
) ON [PRIMARY]
GO
/****** Object: Table [dbo].[User_Detail] table data ******/
SET IDENTITY_INSERT [dbo].[User_Detail] ON
INSERT [dbo].[User_Detail] values (1, N'LDS', N'LDS Rajput', N'free', N'Left', N'jyoti123', N'SUNIL', 6, 4, 4)
INSERT [dbo].[User_Detail] VALUES (2, N'jyoti123', N'jyoti rajput', N'free', N'Left', N'mhesh123', N'priya123', 3, 2, 2)
SET IDENTITY_INSERT [dbo].[User_Detail] OFF
/****** Object: Table [dbo].[User_Detail] trigger ******/
CREATE TRIGGER triggAfterUpdate ON User_Detail
FOR UPDATE
AS
declare @userid nvarchar(50);
declare @pair varchar(100);
select @userid=i.userid from inserted i;
select @pair=i.pair from inserted i;
SET NOCOUNT ON
if update(pair)
begin
insert into Complete_Pairs(userid,pair)
values(@userid,1);
end
GO
/****** Object: Table [dbo].[Complete_Pairs] Script Date: 05/22/2014 21:20:35 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
CREATE TABLE [dbo].[Complete_Pairs](
[Sno] [int] IDENTITY(1,1) NOT NULL,
[userid] [nvarchar](50) NULL,
[pair] [int] NULL
) ON [PRIMARY]
GO
my query is TRIGGER triggAfterUpdate is fired only when pair column in User_Details table is update only and when we update other column like ljoin or rjoin then my trigger is not fired
please any one can suggest us how it can done or provide solution
Jitendra Kumar Sr. Software Developer at Ruvixo Technologies 7895253402

>select @userid=i.userid
frominserted i;
select
@pair=i.pair
frominserted i;
The code above assumes a single row UPDATE.
You have to setup the trigger for set processing like when 100 rows are updated in a single statement.
UPDATE trigger example: http://www.sqlusa.com/bestpractices2005/timestamptrigger/
Kalman Toth Database & OLAP Architect
SQL Server 2014 Design & Programming
New Book / Kindle: Exam 70-461 Bootcamp: Querying Microsoft SQL Server 2012

RZ20: how to create status attribute for monitoring object ?

Hello,
I am brand new into RZ20 maintenance and my question may be silly.
Anyway, SAP supplies monitoring objects customized with performance attribute (such as MTE class SAPconnect Error). Instead of having such performance attribute, I would prefer to have a MTE class with status attribute in order to trigger an alert each time a there is a SAPconnect message with error.
Is it possible to define such status attribute ? If so, how could it be achieved ?
Thank you for your help.
Regards,
Fabrice

Hello Fabrice,
the monitoring object and its attributes are defined by the data collector. This means the attributes are hard coded (in the function module or report in case of data collection method (a passive data collector) of directly in the kernel (an active data collector).
And as long as the data collector is delivered by SAP, changing the coding is not a good idea
So only way would be to create your own monitoring objects using your own data collector. A documentation how to do this is available in the Service MarketPlace: "<a href="http://service.sap.com/~sapidb/011000358700001752571999E/SUPPLIER_46A_EN_Neu.pdf">How to Write a Data Supplier for the Alert Monitor</a>".
Regards, Michael

What is the system status for a transaction ?

Hi All,
I want to know what is the exact meaning (usage) of system status ?
We can create a user status in status profile and attach it to transaction type, then why do we use system status ?
Regards,
Ashish

Hi Ashish,
User status are defined by the customer to define their business scenarios. So based on the business they can create status like Document Open (E001), In Transit (E002) etc. As you are aware that Status triggers the business flow in the SAP System. So based on a particular status the subsequent action will be followed. But how will SAP System know when to trigger the Billing, delivery and all the subsequent documents based on Customer Status Messages? So, to overcome this problem there is the concept of System Status like open (I001) etc which will help the system to keep track of the necessary actions. You can associate a System Status to User Status and hence you can trigger the business flow based on the status.
Have a look at the following link for a detailed technical info. The Status table is TJ30 for User status.
http://help.sap.com/saphelp_crm60/helpdata/en/5b/e4f53911cac83ce10000000a114084/frameset.htm
Hope this helps.
Thanks,
Samantak

Alert to IC Agent when the status for the service request is changed

HI,
When a Service request status is changed to completed immediately the ic Agent should receive an Alert so that he can call the customer for survey. If he has not taken any action then the alert should be available in his inbox and an Alert should be sent to his manager that the Ic Agent has not done the survey.
With Regards,
Selvam T

Hi,
You may try in the service request action profile, when the status is set 'completed' then trigger the alert.
For this you have to first configure the alert.
Thanks,
Pandu

0002-Status Single,NM shouldn't trigger Spouse,Children in 0021

Similar Messages

Maybe you are looking for