001 2010 period is not open

Hi experts...
As I post the invoice through MIRO GET this message
001 2010 period is not open
as i tried through OB52 MMPV MMRV but finally i am unable to remove this message...
so please tell me the exact solution
kind regards
Rahul

Hi,
Have you tried transaction MMRV that the MM period is open for the company you are working with?
"MMRV - here you can check which are the open MM periods for company code. If you check Allow posting to previous period - it will forbid MM posting in previous period"
Regards
Ernesto

Similar Messages

Production order creation - posting period is not open

Dear All,
Could you please explain me what the impact on CO/FI is when I create a production oder? Indeed, the posting period is not open in OB52 but I am wondering why the System issues this message when I use CO01 or CO40.
Thanks
D.

Hi d,
Whenever a production order is created or converted to planned orders, each of these orders carries some activities
which are linked to cost elements in CO and GL accounts in FI. The system gives you an alert that if posting periods
are not open you cannot settle the production order. If production order is pending that results in Work in progress
which carries gl accounts relevant to be posted in the particular period.
Regards,
Sadashivan

Ms Office Document On SharePoint 2010 library does not Open and stays on downloading

Ms office documents on a sharePoint 2010 library does not open in client and stays on
downloading... and never opens. This hapeens to Documents more than 2 or 3 Mb. That would be great if u cuold help me, Thanks

Hi,
This is a quick note to let you know that I am trying to involve someone familiar with this topic to further look at this issue.
Max Meng
TechNet Community Support

Posting period is not open

Hello folks,
I am trying to PGI a delivery against an STO.Though the posting period is current, system throws an error "posting period XXXX is not open"
Before this I ran MMPV to make sure the posting period is current.
Please advise.
Edited by: rksap193 on Jan 29, 2008 10:04 AM

Hi,
Just chek MMRV & what's the Current Period ..?
What's the period with MMPV..?
Regards

When I run the Receiving interface i get an error that the period is not open. But all periods are open from Jun 14 through April 15.

I am running the following inserts and all periods are open but I still get this error in the po_interface_errors table.
"Error: Please enter a GL Date within an open inventory accounting period.
Cause:        You provided a GL date that is not within an open inventory accounting period.
Action:        Enter a date that is within an open period."
Here are the inserts.
INSERT INTO rcv_headers_interface
(header_interface_id, GROUP_ID, processing_status_code,
receipt_source_code, transaction_type, last_update_date,
last_updated_by, last_update_login, creation_date, created_by,
vendor_id,expected_receipt_date, validation_flag)
SELECT rcv_headers_interface_s.NEXTVAL, rcv_interface_groups_s.NEXTVAL,
'PENDING', 'VENDOR', v_transaction_type , SYSDATE, v_user_id, 0,SYSDATE, v_user_id,
v_vendor_id, SYSDATE, 'Y'
FROM DUAL;
INSERT INTO rcv_transactions_interface
(interface_transaction_id, GROUP_ID,
last_update_date, last_updated_by, creation_date,
created_by, last_update_login, transaction_type,
transaction_date, processing_status_code,
processing_mode_code, transaction_status_code,
po_header_id, po_line_id, item_id, quantity, unit_of_measure,
po_line_location_id, auto_transact_code,
receipt_source_code, to_organization_code,
source_document_code, document_num,
destination_type_code,
deliver_to_location_id,subinventory,
header_interface_id, validation_flag)
SELECT rcv_transactions_interface_s.NEXTVAL,
rcv_interface_groups_s.CURRVAL, SYSDATE, v_user_id,
SYSDATE, v_user_id, 0, 'RECEIVE', SYSDATE, 'PENDING',
'BATCH', 'PENDING', v_po_header_id,v_po_line_id,
v_item_id, v_quantity,
v_unit_meas_lookup_code,
v_line_location_id, 'DELIVER', 'VENDOR',
v_organization_code, 'PO', v_po_number,
v_destination_type_code,
v_deliver_to_location_id, v_destination_subinventory,
rcv_headers_interface_s.CURRVAL, 'Y'
FROM DUAL;

I went to Inventory > Setup > Organizations
but I do not see a place to open a period under an organization. If there is another place to go let me know.
I looked under calendars but that does not have anything to do with periods as far as I can tell.

SharePoint 2010 - InfoPath form not opening in browser but prompts to open or save the xml

I have 6 site collections for a web app. An InfoPath form has been deployed which is filled by users from each subsite under these site collections. Until recently the form is working fine but recently it stopped opening the form in browser on 4 out of
6 site collections. On the site collections it's not working, when users try to open the InfoPath form, they get the option to save or open the .xml file. This form hasn't been changed since Dec. Not sure what broke this. Can any one help?

Hi,
1.Check whether feature is activated for the infopath form on site collection level. if it is not activate and it will open form in browser.
2.You need to set Browser
File Handling to Permissive.
Open Central Administration -> Manage Web Applications
-> Select web application -> General Settings >>
Browser File Handling >> set to Permissive .
https://social.msdn.microsoft.com/Forums/office/en-US/3367ce25-5933-47c5-9c10-b00f8a11fe4e/sharpoint-2010-published-infopath-2010-filler-form-open-save-or-save-as?forum=sharepointcustomizationprevious
Regards,
Rajendra Singh
If a post answers your question, please click Mark As Answer on that post and Vote as Helpful
http://sharepointundefind.wordpress.com/

Hyperlinks in Outlook 2010 emails do not open browser

I have 2 PCs with nearly identical software configurations except for the OS.
One PC uses Windows 7 Ultimate x64, the other uses Windows 7 Home Premium x64.
Both have Office Professional Plus 2010 and Norton Security Suite 4 installed.
Both PCs have all available updates installed.
My problem is with hyperlinks contained in emals received into Outlook 2010.
On the Ultimate system, the hyperlinks work properly, that is, clicking a hyperlink opens a browser window, as expected.
On the Home Premium system, the hyperlinks don't work at all correctly.
The first time any hyperlink is clicked, a message box titled "Windows" pops up with the following content:
Windows can't open this file.
File:
http://www.youtube.com/watch_popup?v=LO2eh6f5Go0
To open this file, Windows needs to know what program you want to use to open it.
Windows can go online to look it up automatically or you can manually select from a list of programs that are installed on your computer.
What do you want to do?
The first option button is labeled "Use the web service to find the correct program."
The second option button is labeled "Select a program from a list of installed programs."
If I select the first option, nothing appears to happen.
If I select the second, I get a pop up with a list of apps. I select Internet Explorer. check the box labeled "Always use the selected program to open this kind of file", click OK and the browser opens.
However, if I go back to the same email and click the same hyperlink during the Outlook session, a window pops up asking me to confirm that I want to open the link using IE.
If I click on any other hyperlink, in the same email or any other email, I get the first pop up "Windows needs to know what program..."
I didn't see any Outlook settings that would affect this behavior.
Any clues about what needs to be done to fix this very annoying behavior?

Hi,
First, please check if you can open other URL in the email, such as
http://www.microsoft.com.
Based on the current situation, the file should be played by Media Player. Now let’s try to set Internet Explorer and Windows Media Player as the default program:
===========
1.
In a window of Internet Explorer, click
Tools > Internet Options.
2.
Click the
Programs tab, under Internet programs, click the
Set Programs button.
3.
Click
Set your default program.
4.
Click on
Internet Explorer, click Set this program as default, and click the
OK button.
5.
Click on
Windows Media Player, click Set this program as default, and click the
OK button.
6.
Reboot the computer and check the results again.
Please take your time to try the suggestions and let me know the results at your earliest convenience. If anything is unclear or if there is anything I can do for
you, please feel free to let me know.
Best Regards,
Sally Tang

Sharepoint 2010 .pdf will not open 'There was an error opening this document'

In a Sharepoint 2010 document library attempting to open a .pdf from a machine connected externally to the system the error "There was an error opening this document. The filename, directory name, or volume label syntax is incorrect." comes up.
When connected internally .pdf files open as expected.
The .pdfs are being opened in the client application.

I can select a .pdf in the library, then choose 'Download a Copy' in the Sharepoint ribbon, then choose 'read', then the .pdf displays.
But I cannot just click on the item, it will give the error listed above.

Posting period 002 2011 is not open (MRKO)

Dear experts,
I process Vendor consignment:
1. Goods receipt - 501K
2. Transfer posting - 411K
3. MRKO
On MRKO, I choose Document date and Posting date is: 17.12.2010
Open period in MM: 01/2011 (12/2010)
Now is 02/2011 but I want to post in 17.12.2010
I get this error:
Posting period 002 2011 is not open
Message no. F5201
Diagnosis
Period 002 of fiscal year 2011 is not open for posting for the variant of posting period 2650.
System Response
Processing cannot be continued.
Procedure
The error can have several causes. In order to eliminate the error, proceed as follows:
1. Check whether the posting date was entered correctly. The system determines the posting period by means of the date.
2. Check whether the required posting period is open for posting for the variant of posting period 2650 and account type +. Make sure that the period is open for posting.
To do this, specify a period interval in which the required period for the variant of posting period 2650 and account type + is contained.
You make these settings in Customizing of Financial Accounting (New) under Financial Accounting Global Settings (New) -> Ledgers -> Fiscal Year and Posting Periods - > Posting Periods -> Open and Close Posting Periods.
Plz help!

Hi,
If you are sure Open period in MM: 01/2011 (12/2010) & 02/2011 not opened( can be cross checked in MMRV)
As you want post in 12/2010,then use t.code: OB52 and open the 12, 2010 period in Account Types A, K, D,M, S and specially Account Type u201C+u201D which stands for valid for all accounts type and save.
Regards,
Biju K

ASKB - POsting Period not open problem

Hi All,
I saw many threads on this problem but not got suiatable solution thats why i am raising this thread again.
Due to some problem my client not Run ASKB for October period, now when he is trying to run ASKB for November month he is getting error that 'Posting period is not open'.
Now we cannot open 'Posting period' 'October' because of some organizational issues.
Kindly suggest me how i run ASKB for 'Current month.
Regards
Sandeep

Hi Sandeep,
To my regret, is the answer here is definitely NO.
A reconciliation of the system would be not possible (For example, in foreign currency and a parallel currency).
This source of error was stopped by switching from batch input sessions to the Direct booking with RAPERB2000. (With batch input sessions it was possible to manipulate).
Furthermore, the values in the periodically posting areas have to be posted into the correct period.
If the reconciliation is not relevant, you can check via testrun which values have to be posted and post them via FB01. In this case you have to manipulate also the table TABAS and T093D. But take into acount that this is on your own risk and will not be supported by SAP.
My personal opinion: Open the periods and run the RAPERB2000 regular.
Regards Bernhard
Edited by: Bernhard Kirchner on Nov 29, 2010 12:54 AM

Periods not open and No ranges not defined

Hi
When trying to post documents in fb01 or f-43 i get a warning that the period is not open for the year 2008. Earlier I had defined the open and close posting periods for the 1 april 2007 to 31 march 2008.
Even after editing the year I get the errot that the number ranges are not defined for 2008.
How should I fix both these problems

hello,
Create the no ranges for the yerar 2008.
FBN1.
Regards
Ravi

FB01 Posting period not open

Hi,
I am an abapper, i am trying to check a BDC for the transaction FB01, in the first screen i get the error message "Posting period <year> not open" Can any body tell me how to find out the correct data to be given in the respective fields.
Regards
Narendiran

hi.
I am working on ECC 5.0 sand box-IDES
IN OMSY, my current period is 09 and ABp indicator is flagged.
In OBY6 i have the variant as 0001.
In OB52, for variant 0001, for one of the account assignment, i have
" From Period 1 Year 1996 To period 12 1999 From Period 2 13 Year 1995 to period 16 1995"
How do i make the FI posting current the FY 07 untill 9999?
Because when i try to change the Year as follows
" From Period 1 year 1996 to Period 12 9999 From Period 2 13 Year 1995 to period 16 9999". i get the following " Error" Message.
" Posting periods should not be opened"
Where can i change the setting from " Error" to " Warning" or how do i make the changes in FI to make it current to year 2007.
Due to this , i am unable to do Goods receipt since when i do MIGO, i get the error message " Posting periods not open"
Much appreciated for your response.

While creating miro error message posting date 009 2011is not open

sir
while creating miro the error message is not open open for the posting date 009 2011

Hi,
The date format you have mentioned 009 2011 won't be supported by SAP system. Please enter it in correct format. If the format is OK an not working means MM posting periods are not open for this month this error will come.In MMPV give company code and specify the period to close and save.Again go to same transaction open the period for this month. I hope this will resolve your issue. Thanking you.
Edited by: Padmasri Garapati on Sep 16, 2011 6:58 AM

Error while release of production order u201CNext period is not openu201D

Hi Experts,
Need your opinions on this issue where my client is facing a problem while create and release a production Order on the last day of the month (Last day of period change).
While create and release of production order for Plant xxxx, system uses to give the error; period Next (e.g. 12) is not open. Same thing if I have created the order using T. code CO01; but when I tried to release and save the order through T. code CO02 then it gave me the same error (Next period is not Open), it checks for the next period to open.
The above scenario happens only on last day of the month. Earlier this kind of error was not there so the question is why the period check is happening while saving the production order.
After speaking to the user, it is determined that they are facing this problem since upgrade (Since last 8 month). Hence need to check what additional check has been implemented with upgrade from R/3 4.7 to ECC 6.
Error Message No F5201
Appreciate your help how to dig up this issue.
With Regards
Anant

Hi Guys,
Please throw some light why on the last day of the month (Last day of period change) at the time of release the order user is getting error: Period Next (FI Next period) is not open ( message No. F5201).
My question is why system carried out period checks at the time of release of Production Order.
With Regards
Anant

Safari 7 will not open multiple home Tabs

I have my home page tabs properly set for safari to open 4 sites when Safari is started. On my Mac Pro(Mid 2010), they do not open properly in Mavericks on Safari startup. However, if I click File>New Tab, all of the startup tabs open, along with a new, blank tab.
On my Macbook Pro, they open properly. I've searched the forums for this behavior. I do NOT have glims, so I'm not sure what is causing the issue.
Any advice on how to solve this issue would be appreciated.

Try deleting the cache.db associated with Safari.
Open the Finder. From the Finder menu bar click Go > Go to Folder
Type or copy paste the following:
~/Library/Caches/com.apple.Safari/Cache.db
Click Go then move the Cache.db file to the Trash.
Quit and relaunch Safari to test.

001 2010 period is not open

Similar Messages

Maybe you are looking for