0015 info type BDC upload program work normal for one and slow for other?

Hi... Experts
We have created custom BDC tp update infotype 0015 for our employees. It use to work normal initial. recently , We observed for the HR Team who use to upload this is working / update happening very slow. To isolate this , we have given that BDC authorization to another user, for that user it works fine,
For Example
For HR User (HRUSER1) currently file contains 130 records will take 1200 seconds
For New user (HRNEWUSER1) same will will take only 45 seconds to complete.
What could be the reason??
Authroizations are same even we tried SAP_ALL for user who is getting problem,
Any HR specific parameters variants got stored / freezed and many be leading to this issue.
please do let us know if any ides u have to fix it.
Rgds

Amosha...Good Day
Thanks for your reply. If i am not wrong it is all belongs to seetings to specific host.
As advised we found the size is same in GUI Alt+F12 --> Options -> Local Data Settings.; But i was unlucky the problem continues.
The same set users let them login from any host the behaviour same .
I believe it is some thing / HR Selection option got saved ??//some thing saved out and it is checking continuiously some thing..
Similar Problem we had for some other like PA20 was normal to one with the same authroizations i had anotheer user and when he executes PA20 it is slow and was soved like below.
PA20 - Transactions have very long runtimes
just giving hint / any thing else we need to check in HR Master
Thanks
Edited by: B Jyothi on Jun 15, 2009 10:26 PM

Similar Messages

Why do i have to keep clicking my left mouse button to make the program work it just stops and if left click it starts working

Why do i have to keep clicking my left mouse button to make the program work it just stops and if left click it starts working. I'v only just started to use this program and It's no good at all if I go to a website and click a button I have to keep clicking it to finish what its doing.

hello jeffsprig, can you try to replicate this behaviour when you launch firefox in safe mode once?
[[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]]
multiple other affected users have reported that this was an issue caused by malware on their pc. please run a scan of your system with [http://www.bleepingcomputer.com/download/adwcleaner/ adwcleaner] and the [http://www.malwarebytes.org/products/malwarebytes_free free version of malwarebytes].
[[Troubleshoot Firefox issues caused by malware]]

My firefox starts and works normally for a while then all of a sudden it switches to safe mode. I restart the computer and the same thing happens again.

When I restart the computer as before it works normally for a few minutes then all of a sudden it's in safe mode again. It just started doing this a few days ago, I never had a problem before and it's really annoying as I end up having to restart my computer every few minutes.

Try to update firefox to the latest 12.0 and check it again. If you have the problem again try to a new profile see: [http://support.mozilla.org/en-US/kb/Managing-profiles Managing profiles] , see also: [http://support.mozilla.org/en-US/kb/Profiles Profiles] .
thank you
Please mark "Solved" the answer that really solve the problem, to help others with a similar problem.

People picker is not working for ie11 but working fine for other lower version

i am using sharepoint 2010 and windows authentication
recently i have updated my ie to ie11 and problem goes here.
when i try to select from people picker, there are an unexpected error happened
however when i use other ie version, people picker work fine, what goes wrong?
i have already added my system as trusted site
if there any others thing i miss out?

Hi,
According to your post, my understanding is that People picker is not working for ie11 but working fine for other lower version.
IE 11 is known to have compatibility issues on SharePoint 2010, please make sure to:
first of all, try installing latest update for IE 11 (several compatibility issues were fixed since the first release)
add the site to compatibility view (in IE> Tools> Compatibility view settings> type site name> add)
add the site to trusted sites and set the zone security level to low (in IE> Internet Options> Security> trusted sites> sites>add your site there> ok> custom level> select low> reset> ok)
You can use developer tools (f12) and set browser mode to the version that is most compatible with your environment.
Best Regards,
Linda Li
Linda Li
TechNet Community Support

I had all of my video files that I work on in iMovie saved to an external hard drive exclusively to save space on my Macbook. I had just finalized a project, went to work on another one and files couldn't be found, were not deleted how do I find them?

I had all of my video files that I work on in iMovie saved to an external hard drive exclusively to save space on my Macbook. The other day I had just finalized a project and went to work on another one and when I opened the project I could see what should have been there, but scrolling over the entire clip I would only see black and that the file was missing. I did not drag anything on the hard drive to the trash or move anything. How can I get those files? These are videos of my kids and I am devastated and willing to try anything!

Control click does not work - no option to find files. I have no idea what to do. When I look at the usage of the external drive the space is being used, but I cannot find the files. I am going to try MacKeeper's Undelete and see if I can make any progress with it.

I've downloaded CS6 Master Collection but only see The Photoshop icon. I can't seem to find the other programs, except on "uninstall programs" How do I open and run the others?

I've downloaded CS6 Master Collection but only see The Photoshop icon. I can't seem to find the other programs, except on "uninstall programs" How do I open and run the others?

How about you give us some real information.
Did you install the software? What operating system?

I'm downloading a movie to each of my kids new ipads. it says that it's downloading, but the completion % has shown the same % since it began 2 hours ago. is this normal? one shows 94%, the other 24%. how do I know if it's progressing?

I'm downloading a movie to each of my kids new ipads. it says that it's downloading, but the completion % has shown the same % since it began 2 hours ago. is this normal? one shows 94%, the other 24%. how do I know if it's progressing?

You are on Windows 2000, you do not have a "Firefox" button, and should consider yourself to be fortunate in that you still have menus and don't have to do anything to get the menus back instead of the "Firefox" button. (The same applies to Windows XP users).
Use the "File" menu to get to Import. You are not on Windows 7 or Vista, and don't have to put up with the nonsense added for Aero.
If you want the "Firefox" button you can get it with View -> toolbars -> (uncheck) Menu Bar. The menu bar and the "Firefox" button were supposed to be mutually exclusive (which is impossible in some cases without being incompatible).
Once you are using the "Firefox" button ...
Use the "Alt" key to view the menu bar (temporarily) containing File, Edit, View, History, Bookmarks, Tools, and Help. On Windows 7 and Vista, the menu bar was hidden by default in Firefox 4 and above. These menu items are more or less available under the "Firefox" button which has the most used of the built-in Firefox menu items available in a different format.
To get back to having menus again. "Firefox" button -> Options (second column) -> (check) Menu Bar
You can make '''Firefox 7.0.1''' look like Firefox 3.6.*, see numbered '''items 1-10''' in the following topic [http://dmcritchie.mvps.org/firefox/firefox-problems.htm#fx4interface Fix Firefox 4.0 toolbar user interface, problems (Make Firefox 4.0 thru 8.0, look like 3.6)]. ''Whether or not you make changes, you should be aware of what has changed and what you have to do to use changed or missing features.''
* http://dmcritchie.mvps.org/firefox/firefox-problems.htm#fx4interface

Updated iphone4 to ios5 - get Device not supported for icloud - worked fine for other iphone4

Updated iphone4 to ios5 - get "Device Not Supported" message - worked fine for other iphone4 & ipad. Why is this iphone "not qualified for icloud"?

The Apple Support Communities are an international user to user technical support forum. As a man from Mexico, Spanish is my native tongue. I do not speak English very well, however, I do write in English with the aid of the Mac OS X spelling and grammar checks. I also live in a culture perhaps very very different from your own. When offering advice in the ASC, my comments are not meant to be anything more than helpful and certainly not to be taken as insults.
Try a reset. Press & hold the Power and Home buttons simultaneously, ignoring the red power off slider, until the Apple logo appears. Then release both buttons. This should not affect any content on the iPad, it is similar to rebooting your computer.

I have CS6 and CC installed on my mac when I'm using CS6 and use bridge CC activates how can I set this to only work on one and not the other

I have CS6 and CC installed on my mac when I'm using CS6 and use bridge CC activates how can I set this to only work on one and not the other

If you want Bridge CS6 to open when using Photoshop CS6, you must quit Bridge CC.
Then File menu > Browse in Bridge will bring up Bridge CS6.
If Bridge CC is already open, The File > Browse in Bridge for Photoshop CS6 will use Bridge CC and Bridge CS6 will not open.
I hope that's the answer you were looking for.
Gene

While using skype on my iphone 4s i found after an hour or so the iphone was very warm and actually bit hot. Is this normal for other users too?

While using Skype on my iphone 4s i found the phone was heated up. It was very warm. I had used for 1 hour or so. Is this normal for other users aswell ?
And also sometimes when i get the call no matter how much i try to slide the cursor, it doesn't move. I miss those calls. It looks like it is freezed. Has this
happened to others too?

*Update*
I thought I had found the offending 'app' namely "Songpop."
I regularly use "Songpop" on my phone late at night via my wifi connection.
All enteries on my phonebill are at midnight (even though I have a data allowance it was excluded from allowance). I switched 3G off on Friday, played "Songpop" at midnight and at the exact time I got a "Server Error" message.
I posted a message on the "Songpop" support forum.At first they said this was a problem relating to my ISP.
I have spoken to my ISP and asked if there are connection drops at the time I have been billed (ie to establish if my wifi dropped and 3G kicked in without my knowledge) and have been advised that there aren't any connection drops at that time.
"Songpop" have now responded that "This is an issue to take up with Apple Support" see: http://support.songpop.fm/songpop/topics/playing_songpop_on_phone_via_wifi_but_i ncurring_download_data_charges_for_3g_useage?utm_content=topic_link&utm_medium=e mail&utm_source=reply_notification
Hopefully someone at Apple can respond ....

BDC upload program for inoftypes 14 and 168

Hi All,
I am uploading IT 14 and 168 through a single BDC program. i am opening the bdc session using
BDC_OPEN_GROUP before bdc recording. my requirement is to upload IT 168 only when uploading
of IT 14 is successful. For this i am using the message table of the first upload(for IT14). if the message
type is 'S'(success) then i am uploading IT168 else i am moving it to an error internal table. Please suugest
wthr this logic is fine. Also where should i call BDC_CLOSE_GROUP. currently i am calling it after the
PERFORM for upload of infotype 168 but it is giving error "unable to open BDC_CLOSE_GROUP".
Can anyone suggest me the solution through some sample code.
i am attaching here my code for your reference.
REPORT ZUSAHR_IN_BN_E_014_168 NO STANDARD PAGE HEADING
 LINE-COUNT 65 LINE-SIZE 132.
*=======================================================================
TYPE-POOLS
*=======================================================================
TYPE-POOLS: slis,
 truxs.
*=======================================================================
TABLES
*=======================================================================
TABLES: pernr.
*=======================================================================
INFOTYPES
*=======================================================================
INFOTYPES: 0000, "Action
 0014, "Recurring payement/deductions
 0168. "Insurance plan
*=======================================================================
TYPES
*=======================================================================
TYPES : BEGIN OF t_0014_0168,
 num(20) type c, "Number
 actcode(1) type c, "action code
 lgart LIKE p0014-lgart, "Wage Type
 betrg LIKE q0014-betrg, "Amount
 betrg(14) type c, "Amount
 bplan LIKE p0168-bplan, "Benefit plan
 bcovr like p0168-bcovr, "Insurance Option
 END OF t_0014_0168,
 BEGIN OF t_pernr,
 pernr LIKE p0002-pernr, "personnel number
 perid like p0002-perid, "SSN
 END OF t_pernr,
 BEGIN OF errmsg,
 pernr LIKE p0014-pernr, "personnel number
 messg(85), " message text
 END OF errmsg,
 BEGIN OF succmsg,
 pernr LIKE p0014-pernr, "personnel number
 messg(85), " message text
 END OF succmsg.
*=======================================================================
INTERNAL TABLES
*=======================================================================
DATA : i_itab TYPE STANDARD TABLE OF t_0014_0168,
 i_pernr TYPE STANDARD TABLE OF t_pernr,
 i_bdcitab TYPE STANDARD TABLE OF bdcdata ,
 i_bdcmsgcoll TYPE STANDARD TABLE OF bdcmsgcoll,
 i_errmsg TYPE STANDARD TABLE OF errmsg,
 i_succmsg TYPE STANDARD TABLE OF succmsg.
*=======================================================================
RANGES
*=======================================================================
*=======================================================================
DATA DECLARATION
*=======================================================================
DATA : messg(85).
*=======================================================================
GLOBAL WORKAREAS
*=======================================================================
DATA : wa_itab TYPE t_0014_0168,
 wa_pernr TYPE t_pernr,
 wa_bdcitab TYPE bdcdata ,
 wa_bdcmsgcoll TYPE bdcmsgcoll,
 wa_errmsg TYPE errmsg,
 wa_succmsg TYPE succmsg.
*=======================================================================
GLOBAL VARIABLES
*=======================================================================
DATA : g_n1 TYPE sy-dbcnt.
*=======================================================================
GLOBAL CONSTANTS
*=======================================================================
DATA : g_x TYPE c VALUE 'X',
 g_asc TYPE char10 VALUE 'ASC',
 g_xls(3) TYPE c VALUE 'XLS',
 g_f TYPE c VALUE 'F',
 g_1 TYPE c VALUE '1',
 g_0 TYPE c VALUE '0',
 g_u TYPE c VALUE 'U',
 g_int(3) TYPE c VALUE 'INT',
 g_raw(3) TYPE c VALUE 'RAW',
 G_A(1) TYPE C VALUE 'A',
 G_C(1) TYPE C VALUE 'C',
 G_D(1) TYPE C VALUE 'D'.
*=======================================================================
SELECTION-SCREEN
*=======================================================================
*Block for Additional selection
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
PARAMETERS : p_check TYPE char1 DEFAULT 'X', "check box for test run
 p_file1 TYPE rlgrap-filename OBLIGATORY, " upload file
 p_file2 TYPE rlgrap-filename OBLIGATORY, " succ emp
 p_file3 TYPE rlgrap-filename OBLIGATORY. " err emp
SELECTION-SCREEN END OF BLOCK b1.
*=======================================================================
AT SELECTION-SCREEN
*=======================================================================
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file1.
PERFORM sub_file_intake.
*=======================================================================
START-OF-SELECTION
*=======================================================================
START-OF-SELECTION.
PERFORM sub_data_upload.
PERFORM GET_PERNR_SSN.
*=======================================================================
END-OF-SELECTION
*=======================================================================
END-OF-SELECTION.
*> upload the data using BDC
PERFORM sub_bdc_upload.
*> To display the contents of the input file for test run
IF p_check = space.
 PERFORM sub_output.
ELSE.
*> To display in the messages after uploading the input file
 PERFORM sub_output_messages.
ENDIF.
*& Form sub_file_intake
 F4 on filename to accept file
--> p1 text
<-- p2 text
FORM sub_file_intake .
To provide F4 Functionality for file path
CALL FUNCTION 'KD_GET_FILENAME_ON_F4'
 EXPORTING
 program_name = syst-repid
 CHANGING
 file_name = p_file1
 EXCEPTIONS
 mask_too_long = 1
 OTHERS = 2.
IF sy-subrc <> 0.
 MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
 WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM. " sub_file_intake
*& Form SUB_DATA_UPLOAD
 Upload the input file and perform the checkings.
--> p1 text
<-- p2 text
FORM SUB_DATA_UPLOAD .
*> local variable for filename
DATA : l_file1 TYPE string.
*> assign value for file1.
l_file1 = p_file1.
*> function to upload the input file
CALL FUNCTION 'GUI_UPLOAD'
 EXPORTING
 filename = l_file1
 filetype = g_asc
 has_field_separator = g_x
 TABLES
 data_tab = i_itab
 EXCEPTIONS
 file_open_error = 1
 file_read_error = 2
 no_batch = 3
 gui_refuse_filetransfer = 4
 invalid_type = 5
 no_authority = 6
 unknown_error = 7
 bad_data_format = 8
 header_not_allowed = 9
 separator_not_allowed = 10
 header_too_long = 11
 unknown_dp_error = 12
 access_denied = 13
 dp_out_of_memory = 14
 disk_full = 15
 dp_timeout = 16
 OTHERS = 17.
IF sy-subrc <> 0.
 MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
 WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM. " SUB_DATA_UPLOAD
*& Form sub_output
 if program is on test run mode then display records
FORM sub_output .
*> Count the number of employee to be processed
CLEAR g_n1.
DESCRIBE TABLE i_itab LINES g_n1.
IF g_n1 NE 0.
*> if program is in test run mode then display
 LOOP AT i_itab INTO wa_itab.
 WRITE: / wa_itab-num,
 wa_itab-lgart,
 wa_itab-betrg,
 wa_itab-bplan,
 wa_itab-bcovr.
 ENDLOOP.
ENDIF.
ENDFORM. " sub_output
*& Form sub_bdc_upload
 bdc upload
FORM sub_bdc_upload .
*> Count the number of employee to be processed
CLEAR g_n1.
DESCRIBE TABLE i_itab LINES g_n1.
IF g_n1 NE 0.
 PERFORM sub_open_group.
 PERFORM sub_bdc_sessions.
 PERFORM sub_close_group.
ELSE.
 MESSAGE e003(zmsg) WITH text-021.
ENDIF.
ENDFORM. " sub_bdc_upload
*& Form sub_open_group
 bdc_open_group
FORM sub_open_group .
*> group name
DATA : c_group LIKE apqi-groupid .
c_group = text-001.
CALL FUNCTION 'BDC_OPEN_GROUP'
 EXPORTING
 client = sy-mandt
 group = c_group
 holddate = sy-datum
 keep = g_x
 user = sy-uname
 prog = sy-cprog
 EXCEPTIONS
 client_invalid = 1
 destination_invalid = 2
 group_invalid = 3
 group_is_locked = 4
 holddate_invalid = 5
 internal_error = 6
 queue_error = 7
 running = 8
 system_lock_error = 9
 user_invalid = 10
 OTHERS = 11.
IF sy-subrc <> 0.
 MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
 WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM. " sub_open_group
*& Form sub_close_group
 Close the BDC Session
FORM sub_close_group .
CALL FUNCTION 'BDC_CLOSE_GROUP'
 EXCEPTIONS
 not_open = 1
 queue_error = 2
 OTHERS = 3.
IF sy-subrc <> 0.
 MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
 WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM. " sub_close_group
*& Form sub_bdc_sessions
 BDC Sessions
FORM sub_bdc_sessions .
*> Local Constants
DATA: l_ctumode LIKE ctu_params-dismode VALUE 'A',
 l_cupdate LIKE ctu_params-updmode VALUE 'S',
 l_startdate(10) type c,
 l_enddate(10) type c,
 l_tcode(4) TYPE c VALUE 'PA30',
 l_info(2) TYPE c VALUE '14'.
LOOP AT i_itab INTO wa_itab.
 perform bdc_dynpro using 'SAPMP50A' '1000'.
 IF wa_itab-actcode = G_A.
 perform bdc_field using 'BDC_OKCODE'
 '=INS'.
 ELSEIF wa_itab-actcode = G_D.
 perform bdc_field using 'BDC_OKCODE'
 '=DEL'.
 ELSEIF wa_itab-actcode = G_C.
 perform bdc_field using 'BDC_OKCODE'
 '=MOD'.
 ENDIF.
 perform bdc_field using 'RP50G-PERNR' wa_itab-num.
 perform bdc_field using 'RP50G-TIMR6'
 'X'.
 perform bdc_field using 'BDC_CURSOR'
 'RP50G-CHOIC'.
 perform bdc_field using 'RP50G-CHOIC' l_info.
 perform bdc_dynpro using 'MP001400' '2010'.
 perform bdc_field using 'BDC_CURSOR'
 'Q0014-BETRG'.
 perform bdc_field using 'BDC_OKCODE'
 '/00'.
 perform bdc_field using 'P0014-BEGDA'
 '03/18/2008'.
 perform bdc_field using 'P0014-ENDDA'
 '12/31/9999'.
 perform bdc_field using 'P0014-LGART' wa_itab-lgart.
 perform bdc_field using 'Q0014-BETRG' wa_itab-betrg.
 perform bdc_field using 'Q0014-BETRG'
 wa_itab-betrg.
 ' 248'.
 perform bdc_field using 'P0014-BETRG' wa_itab-betrg.
 perform bdc_field using 'P0014-WAERS'
 'USD'.
 perform bdc_dynpro using 'MP001400' '2010'.
 perform bdc_field using 'BDC_CURSOR'
 'P0014-BEGDA'.
 perform bdc_field using 'BDC_OKCODE'
 '=UPD'.
 perform bdc_field using 'P0014-BEGDA'
 '03/18/2008'.
 perform bdc_field using 'P0014-ENDDA'
 '12/31/9999'.
 perform bdc_field using 'P0014-LGART' wa_itab-lgart.
 perform bdc_field using 'Q0014-BETRG' wa_itab-betrg.
 perform bdc_field using 'P0014-BETRG' wa_itab-betrg.
 perform bdc_field using 'P0014-WAERS'
 'USD'.
*> refresh the message tab
 REFRESH i_bdcmsgcoll.
 CALL TRANSACTION l_tcode USING i_bdcitab
 MODE l_ctumode
 UPDATE l_cupdate
 MESSAGES INTO i_bdcmsgcoll.
*> refresh the bdc data tab
 REFRESH i_bdcitab.
*> store the message for this pernr
 PERFORM sub_build_messages.
ENDLOOP.
ENDFORM. " sub_bdc_sessions
 Start new screen *
FORM bdc_dynpro USING program dynpro.
CLEAR wa_bdcitab.
wa_bdcitab-program = program.
wa_bdcitab-dynpro = dynpro.
wa_bdcitab-dynbegin = g_x.
APPEND wa_bdcitab TO i_bdcitab.
ENDFORM. "BDC_DYNPRO
 Insert field *
FORM bdc_field USING fnam fval.
IF fval <> space.
 CLEAR wa_bdcitab.
 wa_bdcitab-fnam = fnam.
 wa_bdcitab-fval = fval.
 APPEND wa_bdcitab TO i_bdcitab.
ENDIF.
ENDFORM. "BDC_FIELD
*& Form sub_build_messages
 Generate the messages
FORM sub_build_messages .
*> Local Constants
DATA : l_s TYPE c VALUE 'S'.
LOOP AT i_bdcmsgcoll INTO wa_bdcmsgcoll.
*> generate the message
 CALL FUNCTION 'MESSAGE_TEXT_BUILD'
 EXPORTING
 msgid = wa_bdcmsgcoll-msgid
 msgnr = wa_bdcmsgcoll-msgnr
 msgv1 = wa_bdcmsgcoll-msgv1
 msgv2 = wa_bdcmsgcoll-msgv2
 msgv3 = wa_bdcmsgcoll-msgv3
 msgv4 = wa_bdcmsgcoll-msgv4
 IMPORTING
 message_text_output = messg
 EXCEPTIONS
 OTHERS = 1.
 IF sy-subrc EQ 0.
*> if message type is 'S' then store in successful table
 IF wa_bdcmsgcoll-msgtyp = l_s.
 MOVE wa_itab-num TO wa_succmsg-pernr.
 MOVE messg TO wa_succmsg-messg.
 APPEND wa_succmsg TO i_succmsg.
 CLEAR wa_succmsg.
 PERFORM BDC_UPLOAD_168.
 ELSE.
*> if message type is 'E' then store in error table
 MOVE wa_itab-num TO wa_errmsg-pernr.
 MOVE messg TO wa_errmsg-messg.
 APPEND wa_errmsg TO i_errmsg.
 CLEAR wa_errmsg.
 ENDIF.
 ENDIF.
ENDLOOP.
ENDFORM. " sub_build_messages
*& Form sub_output_messages
 text
--> p1 text
<-- p2 text
FORM sub_output_messages .
IF p_check = g_x.
*> clear the count
 CLEAR g_n1.
*> count the number of successful employees
 DESCRIBE TABLE i_succmsg LINES g_n1.
 IF g_n1 <> 0 .
*> download success file
 PERFORM sub_succ_file.
*> display the successful employees
 WRITE :/ text-002.
 LOOP AT i_succmsg INTO wa_succmsg.
 WRITE:/ wa_succmsg-pernr, wa_succmsg-messg.
 ENDLOOP.
 ENDIF.
*> clear the count
 CLEAR g_n1.
*> count the number of error employees
 DESCRIBE TABLE i_errmsg LINES g_n1.
 IF g_n1 <> 0 .
*> download error file
 PERFORM sub_err_file.
*> display the error employees
 WRITE :/ text-003.
 LOOP AT i_errmsg INTO wa_errmsg.
 WRITE:/ wa_errmsg-pernr,wa_errmsg-messg.
 ENDLOOP.
 ENDIF.
ENDIF.
ENDFORM. " sub_output_messages
*& Form SUB_SUCC_FILE
 text
--> p1 text
<-- p2 text
FORM sub_succ_file .
*> local variable for filename
DATA : l_file1 TYPE string.
*> assign value for file1.
l_file1 = p_file2.
CALL FUNCTION 'GUI_DOWNLOAD'
 EXPORTING
 filename = l_file1
 filetype = g_asc
 TABLES
 data_tab = i_succmsg
 EXCEPTIONS
 file_write_error = 1
 no_batch = 2
 gui_refuse_filetransfer = 3
 invalid_type = 4
 no_authority = 5
 unknown_error = 6
 header_not_allowed = 7
 separator_not_allowed = 8
 filesize_not_allowed = 9
 header_too_long = 10
 dp_error_create = 11
 dp_error_send = 12
 dp_error_write = 13
 unknown_dp_error = 14
 access_denied = 15
 dp_out_of_memory = 16
 disk_full = 17
 dp_timeout = 18
 file_not_found = 19
 dataprovider_exception = 20
 control_flush_error = 21
 OTHERS = 22.
IF sy-subrc EQ 0.
 MESSAGE s003(zmsg) WITH text-006.
ENDIF.
ENDFORM. " SUB_SUCC_FILE
*& Form SUB_ERR_FILE
 text
--> p1 text
<-- p2 text
FORM sub_err_file .
*> local variable for filename
DATA : l_file1 TYPE string.
*> assign value for file1.
l_file1 = p_file3.
CALL FUNCTION 'GUI_DOWNLOAD'
 EXPORTING
 filename = l_file1
 filetype = g_asc
 TABLES
 data_tab = i_errmsg
 EXCEPTIONS
 file_write_error = 1
 no_batch = 2
 gui_refuse_filetransfer = 3
 invalid_type = 4
 no_authority = 5
 unknown_error = 6
 header_not_allowed = 7
 separator_not_allowed = 8
 filesize_not_allowed = 9
 header_too_long = 10
 dp_error_create = 11
 dp_error_send = 12
 dp_error_write = 13
 unknown_dp_error = 14
 access_denied = 15
 dp_out_of_memory = 16
 disk_full = 17
 dp_timeout = 18
 file_not_found = 19
 dataprovider_exception = 20
 control_flush_error = 21
 OTHERS = 22.
IF sy-subrc EQ 0.
 MESSAGE s003(zmsg) WITH text-007.
ENDIF.
ENDFORM. " SUB_ERR_FILE
*& Form GET_PERNR_SSN
 text
--> p1 text
<-- p2 text
FORM GET_PERNR_SSN .
data : l_cnt type i.
describe table i_itab lines l_cnt.
if l_cnt ge 0.
 SELECT PERNR PERID FROM PA0002 INTO table i_pernr
 FOR ALL ENTRIES IN i_itab
 WHERE PERID EQ i_itab-num.
 IF SY-SUBRC EQ 0.
 PERFORM MODIFY_TABLE.
 ENDIF.
endif.
ENDFORM. " GET_PERNR_SSN
*& Form MODIFY_TABLE
 text
--> p1 text
<-- p2 text
FORM MODIFY_TABLE .
LOOP AT i_itab INTO wa_itab.
 READ TABLE i_pernr INTO wa_pernr WITH KEY perid = wa_itab-num.
 IF SY-SUBRC EQ 0.
 MOVE WA_PERNR-PERNR TO WA_ITAB-NUM.
 MODIFY i_itab FROM wa_itab.
 ENDIF.
ENDLOOP.
ENDFORM. " MODIFY_TABLE
*& Form BDC_UPLOAD_168
 text
--> p1 text
<-- p2 text
FORM BDC_UPLOAD_168 .
PERFORM sub_open_group.
PERFORM sub_bdc_sessions_168.
PERFORM sub_close_group.
ENDFORM. " BDC_UPLOAD_168
*& Form SUB_BDC_SESSIONS_168
 text
--> p1 text
<-- p2 text
FORM SUB_BDC_SESSIONS_168 .
DATA: l_ctumode LIKE ctu_params-dismode VALUE 'A',
 l_cupdate LIKE ctu_params-updmode VALUE 'S',
 l_sdate(10) type c,
 l_edate(10) type c,
 l_tcode(4) TYPE c VALUE 'PA30',
 l_info(3) TYPE c VALUE '168'.
LOOP AT i_itab INTO wa_itab.
 perform bdc_dynpro using 'SAPMP50A' '1000'.
 IF wa_itab-actcode = G_A.
 perform bdc_field using 'BDC_OKCODE'
 '=INS'.
 ELSEIF wa_itab-actcode = G_D.
 perform bdc_field using 'BDC_OKCODE'
 '=DEL'.
 ELSEIF wa_itab-actcode = G_C.
 perform bdc_field using 'BDC_OKCODE'
 '=MOD'.
 ENDIF.
 perform bdc_field using 'RP50G-PERNR' wa_itab-num.
 perform bdc_field using 'RP50G-TIMR6'
 'X'.
 perform bdc_field using 'BDC_CURSOR'
 'RP50G-CHOIC'.
 perform bdc_field using 'RP50G-CHOIC' l_info.
 perform bdc_dynpro using 'MP016800' '2000'.
 perform bdc_field using 'BDC_OKCODE'
 '/00'.
 perform bdc_field using 'P0168-BEGDA'
 '03/18/2008'.
 perform bdc_field using 'P0168-ENDDA'
 '12/31/9999'.
 perform bdc_field using 'BDC_CURSOR'
 'P0168-BCOVR'.
 perform bdc_field using 'P0168-BPLAN' wa_itab-bplan.
 perform bdc_field using 'P0168-BCOVR' wa_itab-bcovr.
 perform bdc_field using 'Q0168-CSTDT'
 '03/18/2008'.
 perform bdc_field using 'Q0168-EEPER'
 '2'.
 perform bdc_field using 'P0168-PERIO'
 '2'.
 perform bdc_dynpro using 'MP016800' '2000'.
 perform bdc_field using 'BDC_CURSOR'
 'P0168-BEGDA'.
 perform bdc_field using 'BDC_OKCODE'
 '=UPD'.
 perform bdc_field using 'P0168-BEGDA'
 '03/18/2008'.
 perform bdc_field using 'P0168-ENDDA'
 '12/31/9999'.
 perform bdc_field using 'P0168-BPLAN' wa_itab-bplan.
 perform bdc_field using 'P0168-BCOVR' wa_itab-bcovr.
 perform bdc_field using 'Q0168-CSTDT'
 '03/18/2008'.
 perform bdc_field using 'Q0168-EEPER'
 '2'.
*> refresh the message tab
 REFRESH i_bdcmsgcoll.
 CALL TRANSACTION l_tcode USING i_bdcitab
 MODE l_ctumode
 UPDATE l_cupdate
 MESSAGES INTO i_bdcmsgcoll.
*> refresh the bdc data tab
 REFRESH i_bdcitab.
*> store the message for this pernr
 PERFORM sub_build_messages_168.
ENDLOOP.
ENDFORM. " SUB_BDC_SESSIONS_168
*& Form SUB_BUILD_MESSAGES_168
 text
--> p1 text
<-- p2 text
FORM SUB_BUILD_MESSAGES_168 .
*> Local Constants
DATA : l_s TYPE c VALUE 'S'.
LOOP AT i_bdcmsgcoll INTO wa_bdcmsgcoll.
*> generate the message
 CALL FUNCTION 'MESSAGE_TEXT_BUILD'
 EXPORTING
 msgid = wa_bdcmsgcoll-msgid
 msgnr = wa_bdcmsgcoll-msgnr
 msgv1 = wa_bdcmsgcoll-msgv1
 msgv2 = wa_bdcmsgcoll-msgv2
 msgv3 = wa_bdcmsgcoll-msgv3
 msgv4 = wa_bdcmsgcoll-msgv4
 IMPORTING
 message_text_output = messg
 EXCEPTIONS
 OTHERS = 1.
 IF sy-subrc EQ 0.
*> if message type is 'S' then store in successful table
 IF wa_bdcmsgcoll-msgtyp = l_s.
 MOVE wa_itab-num TO wa_succmsg-pernr.
 MOVE messg TO wa_succmsg-messg.
 APPEND wa_succmsg TO i_succmsg.
 CLEAR wa_succmsg.
 ELSE.
*> if message type is 'E' then store in error table
 MOVE wa_itab-num TO wa_errmsg-pernr.
 MOVE messg TO wa_errmsg-messg.
 APPEND wa_errmsg TO i_errmsg.
 CLEAR wa_errmsg.
 ENDIF.
 ENDIF.
ENDLOOP.
Many thanks in advance!!!!
Rupesh

For the IDOC perspective, you can uses CREMAS.
For the mass maintenance you still have XK99 (which also uses CREMAS internally)
True there is NO BAPI
For the BDC and the table control. Well this is not really true.
In batchinput, instead of maintaining the rows by there Number, you should select it at the first position.
OK-CODE /06 will open a selection screen SAPMF02K 2324. The result of the selection screen goes to the first line of the table control.
Of course this works only in BDC
reward points if helpful
Edited by: Alain Bacchi on Jun 18, 2008 8:48 AM

I just installed OS X10.8 on my iMac 2.66Ghz, now I cannot use Apple Works or Photoshop CS and a few other programs.

Is it possible to install OS X 10.6 Snow Leopard on an external HDD so I can boot from it? I would like to reinstall my old programms and files on the external drive so I can access them and work on them as they are an ongoing project.

Just reinstall the backup you made before updating to Mountain Lion. Next time it would pay to check if old software will run on new system platforms. Your issues have been known about and very well documented over the past two years or more. Snow Leopard is still a good OSX and works well for those not willing to update their software programs.
Cheers
Pete

After closing Firefox to use IE8 or any other program, everything is very choppy and slow. I have to go into Taskbar, Processes, and close firefox.exe manually (which is using up all the memory/CPU). Then, and only then, does everything behave normally. W

After closing Firefox to use IE8 or any other program (like InterVideo to watch a DVD), everything is very choppy and slow. I have to go into Taskbar, Processes, and close firefox.exe manually (which is using up all the memory/CPU and should have closed before). Then, and only then, does everything behave normally. What is going on and what am I doing wrong or missing??
== This happened ==
Every time Firefox opened
== about a couple months ago and happens every time I close Firefox.

'''Kill Application'''
In Task Manager, does firefox.exe show in the '''Processes''' tab?
See: '''[http://kb.mozillazine.org/Kill_application Kill Application]'''
'''Causes and solutions for Firefox hanging at exit:'''
'''[[Firefox hangs]]'''
'''[http://kb.mozillazine.org/Firefox_hangs#Hang_at_exit Firefox hangs at exit (Mozillazine article)]'''
'''[[Firefox is already running but is not responding]]'''
'''Safe Mode'''
You may need to use '''[[Safe Mode]]''' (click on "Safe Mode" and read) to localize the problem. Firefox SafeMode is a diagnostic mode that disables extensions and some other features of Firefox. If you are using a theme, switch to the DEFAULT theme: Tools > Add-ons > Themes before starting Safe Mode. When entering Safe Mode, do not check any items on the entry window, just click "Continue in Safe Mode". Test to see if the problem you are experiencing is corrected.
See:
'''[[Troubleshooting extensions and themes]]'''
'''[[Troubleshooting plugins]]'''
'''[[Basic Troubleshooting]]'''
If the problem does not occur in Safe-mode then disable all of your extensions and then try to find which is causing it by enabling one at a time until the problem reappears. You have to close and restart Firefox after each change via File > Restart Firefox (on Mac: Firefox > Quit). You can use "Disable all add-ons" on the Safe mode start window.
'''''Other Issues''''': to correct security/stability issues
'''Update Java''': your ver. 1.6.0.19; current ver. 1.6.0.20 (important security update 04-15-2010)
''(Windows users: Do the manual update; very easy.)''
See: '''[http://support.mozilla.com/en-US/kb/Using+the+Java+plugin+with+Firefox#Updates Updating Java]'''
Do the update with Firefox closed.

Safari not working on my computer user account, works fine for other users.

Safari hangs up and barely opens a page, or the beach ball just spins and then Safari dies. This is only happening on my user account, and on the other user accounts Safari is working fine. I have tried most recommendations, including resetting Safari, inserting DNS 208.67.222.222 and 208.67.220.220, and turning off plug-ins.
Thanks for any help on this.
I am using Safari v.4.0.4

Just wanted to add that I am also have the exact same issue. I have not added anything new to my computer. I have not downloaded anything off of the internet, installed any new programs, or changed any preferences. I am running 10.6.2 and Safari 4.0.4
This is extremely frustrating. It makes absolutely no sense.

Can't connect to wireless network that works fine for other machines

I received my MacBook Pro last week (2.16 GHz) and I've been very happy with it so far. However, when I brought it home, I've had nothing but issues trying to connect to my wireless network. It's a Netgear, and you can read more about it at the following link:
http://www.netgear.com/products/details/WGT624.php
It works great with my Windows XP Desktop (HP Pavilion 1250n) and PowerBook G4. It works with no password, 40-bit WEP and 128-bit WEP. But not with the MacBook Pro. However, my MacBook Pro has worked at my office and StarBucks, so it works sometimes. Is there something special I have to set on my router for it to work with the MacBook Pro?

I also had problems with wireless connectivity while trying to access a netgear WGR614 albeit a v2 base station.
The problem was that I could not see the network from my MBP. It just didn't appear. The network was open with zero security. However my dell laptop was able to connect fine.
I noticed in the MBP config that the wireless locale was set to USA. I however live in Ireland. I then changed the locale inside the netgear 'wireless settings -> region' to United States. Now everything works fine. My dell didn't seem to care either way. It just picked up the new 'USA - region' based wireless network.
The problem now is that I travel quite a lot and usually I won't have the luxury of being able to change the routers configuration.
Is this just a MBP and Netgear WGR614 issue?
If this happens in the future is there a way for me to change the AirPort wireless card locale?
MBP 15" Core 2 Duo Mac OS X (10.4.8)

0015 info type BDC upload program work normal for one and slow for other?

Similar Messages

Maybe you are looking for