0017 Travel Privileges - Period Parameter is not visible?

Hi there
I want to maintain the Period Parameter in infotype 0017 but it is not visible. In the Travel COsts section, I just see
RGrp Travel Costs
Vehicle Type
Vehicle Class
License Plate Number
There is no screen variant switched on. Any ideas?
thanks.

If I understand here correctly...do you mean you wished to have these fields "pre-filled" in IT017?
The assignment of the trip provision variant in feature TRVCT is based on the parameter WERKS = personnel area and PERSK = Employee Subgroup. Both of the parameters are taken from infotype 0001 and this would be the basis of the employee being assigned to trip provision variant. (see also feature TRVCT via tcode PE03) and then subsequent customizing of such trip schemas in transaction FITVFELD
I hope this helps somewhat answer the question!
Sally

Similar Messages

How can make PIR in period of adjustment not visible in MD04

Dear guru ,
I have defined a period of adjustment for planned independent requirements.
These pir are visible in MD04 but they arenu2019t influent for mrp.
I want to make these pir not visible in MD04
I donu2019t want to delete the pir because I want to maintain history of planned and withdrawn quantity.
How can I do that ?
Thanks is advance.

Hi,
A suggestion:
Split the requirements into 2 lines (i.e. 2 versions), one line which is active, but does not contain the requirement which you do not want & the other which is not active & contains the reqmt which you do not want in MD04.
Regards,
Vivek

Reports Parameter Form not visible in Forms 6i webpage

I have my Forms 6i fmx files and Reports rep files runnung off of HP Unix
within the same directory and yet when I call the report with RUN_PRODUCT,
I don't get the Parameter Form popup. I left it as default at first, and then I even tried using ADD_PARAMETER(pl_id,'PARAMFORM',TEXT_PARAMETER,'HTML') to my parameter pl_id in my RUN_PRODUCT call. Can anyone tell me why I don't get a Parameter form?

test

Travel Privilege Infotype (0017)

Dear All,
On trying to create Travel Privilege Infotype (0017) I am getting the following error:
Table V_T702N_A, argument 40 is not fully maintained
When I checked the table for variant 40, Industry field is blank (there is no value for this).
How to solve the problem?
Regards
Astha

Hi Astha,
the field must not be set blank. If you do not use it, you must at least set it to '0'. '0' is not the same as blank.
Cheers, Lukas

Business Area not visible to account with admin privileges

Hello,
I've encountered the following scenario on visiting a client site:
A Business area has been created by the EUL owner account (IFL) and he has granted admin privileges to another account (BRIANB who has been granted the DBA role). However, when BRIANB logs onto DIscoverer Admin, the Business area in question is not visible. BRIANB is able to create a new business area in the EUL which includes folders that are part of the 'invisible' BA. BRIANB is not able to access the 'invisible' BA using Discoverer End User. I'd be very grateful if anyone out there has an explantion for this,
regards,
KEvin.

Problem solved. My client inadvertently created an additional EUL when initially logging onto Disco Admin as BRIANB. Thereafter this was the default EUL. The errant EUL has now been deleted the required BA's are now in view,
Kevin.

Screen Modifications for Travel Privileges (0017) screen

Hi all,
I am trying to change the screen modifications for Travel Privileges with module pool MP001700. The problem is I can't find the module pool through the IMG>Personnel Management>Personnel Administration>Customization User Interfaces>Change Screen Modifications. If not here, where/how can I do this?
Your help is much appreciated.
Thanks.
Regards,
Eric

Hi guys,
Thanks for the replies but I was looking to do screen modifications preferably by non ABAP methods. I have found the solution where you need to create the module pool manually and the fields selections will appear.
Regards,
Eric

Email Address not visible for output device MAIL in created batch job

Issue in ECC6.0: Email Address not visible to display/change for output device MAIL in print parameter of each step in the created batch job.
User wants to periodically receive report file via send to his email, so I create the batch job running report and send the report in pdf file to his email.
Detail in the batch job
1) In print parameter screen of the step in the batch job
-Using output device MAIL (output type ZPDF1)
-inputting email address of receiver in the EMAIL ADDRESS field
2) After the batch job was saved, I tried to display/change the field EMAIL ADDRESS via Tx. SM37, but this field is invisible. The field can not be displayed or changed anymore. I also tried in SM36, but it is for creating new batch job, not changing the existing batch job.
4) User receives email with pdf file from the batch job.
How to change/display the email address of the receiver in the created batch job?
Note that we just changed to use SAP ECC6 from SAP 4.6c. In SAP 4.6c, we can change/display the
Email Address Field via Tx. SM37.
Pls kindly suggest, thank you very much in advance.

Hi Srirompoti,
After saving the job if the job has not started then you can follow the below steps to change the Email address.
1. View the job from Txn SM37.
2. check the check box for your job that you want to change and goto menu path "Job->change
3. in the next screen goto "Edit->steps." or press "F6" key
4. place the coursor on the job and goto menu path "Step->change->print specifications.
5. here you can change the email address.
If you are not able change the data then you might not have authorization.

HR travel privileges

Hi,
i have to customize HR travel privileges (infotype 0017). I have read in different forums that it can be done through customizing point financial accounting/travel management.....
The issue is that i do not have this customizing point but i have the tables U_27000 and all related to HR t70*.
I have tried to find the customizing point without success and i do not how to do it. i though on changing all tables through sm30 but some of them no possible and i supose there is a better way.
Could you please help me?
thanks in advance

Try to get Transaction code - SPRO access to navigate the IMG path as below.
IMG>Financial accounting>Travel management>Travel planning.. etc.
If this helps, pl do reward.
Thanks
Narasimha

After activation of atandard business content key figure is not visible

Hi all,
I am trying to implement inventory management scnerio in BW3.5 using screen shot PDF , for this i activate standard business content ( cube : 0IC_c03 ) and activate all its related object . one of my key figure 0RECVS_VAL I want to change its parameter for this when I search this infoobject in Infoobject tree this is not visible
while its present in cube 0IC_c03 ,can anybody tell me for changing in this key figure what can i do???
Thanks and regards
Ankit modi

Hi
Again it install from BI content and do the changes what ever u want by RSD1
Cheers
Edited by: SDN USER on Jun 26, 2008 12:04 PM

Follow-on documents are not visible in MIRO in TEST server, awsys = PRD300.

Dear Experts ,
The Test Server was refreshed around mid-June 2011 with data of
Production Server. The follow-on documents are not visible for the
invoice documents in MIRO in TEST server due to value in tables
BKPF,RBKP : field : AWSYS = PRD300 .
The newly created Purchase Orders after the refresh, the accounting
documents can be seen for the Goods Receipt (MIGO_GR-display) and
Invoice documents (MIRO).
we had already raised this issue in March & got the feedback from SAP
as shown below.
accordingly we have developed & run the program "zzlogsys2" which
updates the Logsys/Awsys field from PRD300 ( of production server ) to
that of the current server i.e. TST300 as required.
after which the FI documents for the material documents are visible in
MIGO,but follow-on documents are not visible for the invoice documents
in MIRO.
we have Checked notes 781498 and 28958 to see if the logical system is
correctly assigned , where we found that in table RBKP after entering document number, Fiscal Year , the
Field AWSYS is "PRD300" & not "TST300" as it should be. We will take up the activity of updating table RBKP
also as we are currently doing for tables MKPF & BKPF.
But to have clear picture as to what we are doing is correct , pl
advise about the following :
1) Is it a correct process done by our SAP-Basis team , that every time
any Server ( e.g. Test or Quality ) is refreshed with Production server
data, the Field AWSYS in various transaction tables gets value as
"PRD300" which then is required to replaced by running program such as
ZZlogsys.
REPORT ZZLOGSYS.
TABLES: T000, MKPF.
DATA: NEW_SYS LIKE MKPF-AWSYS.
PARAMETER: OLD_SYS LIKE MKPF-AWSYS.
SELECT SINGLE * FROM T000 WHERE MANDT EQ SY-MANDT.
NEW_SYS = T000-LOGSYS.
CHECK NOT NEW_SYS IS INITIAL.
UPDATE MKPF SET AWSYS = NEW_SYS
WHERE AWSYS = OLD_SYS.
WRITE:/ 'Number of updates: ', SY-DBCNT.
2) if the above process is correct & normal , then which are the other
tables in a particular server ,apart from tables MKPF,BKPF,RBKP , which
needs to be updated the value of field "AWSYS" in the same way
replacing value "PRD300".
3) if the process in point no. 1 is not correct , then what is the
correct process that the Basis team can do while refreshing any target
server with production data so that target server retains its value in
Field AWSYS & not showing "PRD300".
With 3 servers TEST,DEV & Quality , recently refreshed with production
server to bring all servers in Sync for a HR patch application, we have
this situation now in all 3 servers .
Thanks in advance ,
Anil Shanbhag

It is appropriate to move this thread from ERP-MM to [Enterprise Resource Planning (ERP)|Enterprise Resource Planning (SAP ERP);
Edited by: Jeyakanthan A on Jul 7, 2011 4:56 PM

Data is visible in base tables of BOM routing but not visible in front end

Hi,
Through BOM_RTG_PUB API I am populating routing data into base tables, it is successfull.. but that data is not visible in front end when i queried from front end..
i am getting error while i run API as......
An error occured while processing business object BOM_ITEM12 in organization MMO. Please check the data in this business object and re-run the import process.
Can any one help me in finding out what's wrong with this..
Thanks in advance..
Edited by: 875417 on Feb 6, 2012 10:49 PM

Your obeservation is correct, and expected behavior.
This behavior is useful when you have inputs that you would like to set as defaults for the user.
Obviously, if there is a value to be saved, it will require some memory to store the value.
If the input is left empty by default, that memory is made available again.
It may not be easy to think of a good use for this for a graph, but think about for numeric or string controls.
What if the user isnt sure how they should input a certain parameter or value?
You could store a default value so they could see how they should input their value.
Message Edited by Cory K on 09-15-2009 11:12 AM
Cory K

Payload not visible in the XI monitor

In my scenario an xml message was successfully reaching its destination. The XI system was upgraded from support pack 13 to support pack 16. After that the process is still working fine as the XML message is still successfully reaching its destination. The issue we have is that the Payload is not visible in the last two steps of the monitor. We can see the Payload until Technical Routing in the monitor. But Call Adapter and Response steps do not have payload.
(TCode: SXMB_MONI)
when we double click a message we get XML message details and on the left hand side it shows following hierarchy:
XML Message:
Receiver Grouping
 - SOAP Header
 - SOAP Body
 - Payloads
Request Message Mapping
 - SOAP Header
 - SOAP Body
 - Payloads
Technical Routing
 - SOAP Header
 - SOAP Body
 - Payloads
Call Adapter
 - SOAP Header
 - SOAP Body
(( No Payload displayed, but present above!! ))
Response
 - SOAP Header
 - SOAP Body
(( No Payload displayed, but present above!! ))
Any suggestions would be highly appreciated!
Thanks in advance.
Faiq

Hi faiq
This seems to be the normal behaviour starting with SP13 or 14. There was a discussion about this a while ago and I believe it turned out to be works as designed.
This is what was posted as final conclusion in Re: SXMB_MONI does not show payload after upgrade to SP15:
According to SAP (OSS) this is working as designed. Apparently it was an error in the past that the payload was stored in the DB on the ABAP (IE) side when the AE is involved, as it would then be stored twice at DB level. This explains why this is not a problem when e.g. the IDOC adapter is used.
Anyway, the only way to let the system show the payload in SXI_MONITOR is to set the runtime trace level to 3 (full trace) and parameter logging to 1 (trace switched on).
regards,
Peter

Animation Preset not visible

I've downloaded the Amortype preset from Mattrunks. I've copied it to the presets folder in the After Effects CC folder. When I search for the preset in the "effects & presets" window in AE, it's not visible. When I browse for the preset in Bridge, it's visible but then I get this message:
Error: After Effects error: Unable to call "applyPreset" because of parameter 1. File can not be opened. Try Checking acces permissions. Path: "/Applications/Adobe After Effects CC/Presets/Mattrunks/Amortype-2.0.3.ffx"
I checked the permissions in the Finder, and they are all on write and read...
Working on OSX Mavericks 10.9.1
Does anybody know this issue, and how to fix it?

I don't have time to download it for myself and test it but these are the first things I would look at.
The preset may not be compatible with CC. There were some changes. The preset may also require a specific plug-in not included with AE. The preset may have the wrong file extension. It may be written in a different language.

Default values for static report parameters are not visible when scheduling

Hello
Crystal Reports 2008 Dev
Crystal Reports Server 2008
When I publish a report to the repository and then try to schedule that report, the default value that I have set for a static parameter in the report is not visible.
In the Parameters section of the Scheduling wizard this parameter is marked as [EMPTY]
However, when I View the report (right click and select View) from within Infoview, the parameter default value is visible
I have published in the following 3 ways:
Publishing Wizard
File > Save As > Enterprise from withing Crystal Reports Dev
CMC > Folders > Add > Crystal Reports
The results are the same for each method of publishing.
To try to eliminate any DB issues etc i have created a report that is not attached to a datasource.
This test report has one Static parameter.
I have set 3 values for its list: Entry A, Entry B, Entry C
Entry X is set as the parameter Default Value
The parameter is placed in the details section of the report
When the report is Viewed it will prompt for parameter entry, with the default value present
When I try to schedule the report is will not have an entry for its parameter
It seems to me that the default values for parameters should be retained from report design through to report schedule, especially when the default values are retained from report design to report View
Is this a config problem that i have ?
Can anyone help me with this ?
Best regards
Patrick Coote
Edited by: PATRICK COOTE on Oct 2, 2008 2:08 PM
Edited by: PATRICK COOTE on Oct 3, 2008 9:23 AM

Hi Robert
Thanks for the reply and apologies for not responding sooner.
What i have found is that if i use Publishing Wizard to upload reports it is then possible to set values for prompts during the last step of this process.
Although this is a bit clumsy, it is sufficient for now
Best regards
Patrick

"Display Form" button not visible in UWL preview

Hi Friends,
We are implementing Travel module. The standard Workflow WS20000050 has a single level of approval. However, we wanted 2 level approval and so accordingly this was implemened.
Now we want a 3rd level of decision step to be approved by the traveldesk on recept of tickets.
Even the pdf form, which contains the travel details, needs to be visible. In the standard task TS20000118, the "Display Form" button is automatically visible in the UWL preview apart from the usual
"Approve" and "Reject" buttons.
However the content that needs to be shown to the traveldesk is different. To achieve this, i copied the standard task TS20000118 and changed only the task description. Rest everything including the parameters and binding remains same.
But for this task, the "Display Form" button is not visible.
1. Please advice on the possible reasons why this is happening ?
2. Is there any setting or any SPRO configuration wherin we need to
specify the tasks for whom the button needs to be displayed ?? or
Is it some portal side configuration ?
Thanks,
Shashank

Hi Vijay,
Goto:
Universal Worklist Content Configuration -> Click to Administrate Item Types and View Definitions
In the table under the "Current Configurations" tab, select the standard travel configuration provided by SAP -> "com.sap.pct.erp.mss.tra".
Here, search for the code of the task for which everything is working fine; in our case it was TS20000118. Copy this piece of code.
Now download the currently active XML configuration. In the saved XML file, search for the task code which is not working as expected. Replace this piece of code with the code copied in the above step. Save with a different name.
Upload this new configuration with HIgh priority.
Reregister the connector and clear the cache.
These steps solved my problem. Probably it should work for you too.
Regards,
Shashank

0017 Travel Privileges - Period Parameter is not visible?

Similar Messages

Maybe you are looking for