01_2008_Welcome_01.png error

When using iWeb on my MacBook Pro, I get a...
PUBLISH ERROR Can’t create the file “01_2008_Welcome_01.png.” The disk may be damaged or full, or you may not have sufficient access privileges.
Any suggestions? I've tried redoing all pages w/ no luck yet. Thank You!

Try the troubleshooting steps under "Fix iWeb" here...
http://www.iwebformusicians.com/iWeb/iWeb-Tips.html

Similar Messages

Rendering to PNG error

A problem cropped up after switching to After Effect CC 2014; grabbing a frame as a PNG file fails with this error message: "AEGP Plugin PNGIO support: PNGIO library error: known incorrect sRGB profile ( 5027 :: 12 )"
So, what the heck is that supposed to mean and how do I fix it?
Thanks

I'm having the same problem, and I'm not amused.
AE CC 2014 (13.0)
2012 MacPro running OS 10.9.5
Working in 16-bit sRGB color space
Outputting a 36-frame 1080x1080 PNG image sequence as client specified.
Error message "AEGP Plugin PNGIO support: PNGIO library error: known incorrect sRGB profile ( 5027 :: 12 )" followed by "AEGP Plugin PNGIO support: Unable to create PNGIO. ( 5027 :: 12 ) appears regardless of whether I'm rendering millions of colors+ or trillions of colors+ or no alpha.
Tiff sequence with same settings outputs fine.
The same PNG settings output fine in AE CS6 (11.0.4).
The same PNG settings output fine in AE CC (12.2)
Since we're spending $50/month for this stupid cloud subscription I thought we might as well start using these CC versions. Installed Premiere Pro CC 2014 for a simple editing job, but it wasn't compatible with Lion, so I upgraded to Mavericks (after cloning my system drive, of course). AE CS6 then wouldn't open, so I moved my project to AE CC 2014 (not the most recent buggy one). Got these PNG errors, so I've updated CS6 which now will open on Mavericks and has no problem outputting my PNG sequence.
Weak. Guess I'll submit a bug report.
Shawn Marshall
Marshall Arts Motion Graphics

Error message when saving a PDF to PNG: Error attempting to write file.

I get an error message when saving a PDF to PNG. JPG and TIFF works, but no PNG.
Disk space is sufficient! 100GB of 250
A few weeks ago it was no problem to save as PNG. But now! (Perhaps from last update?)
Messages:
When clicking "Ignore":
Adobe Acrobat XI Standard
Version 11.0.09

I have this issue too, but my colleagues do not have this issue(we have same Acrobat Pro 11.0.09). I am sure this issue happens only you updated to 11.0.09, because when you use Windows Restore back to 11.0.08, no issues.

Photoshop CS4 .png Error Message

Hi,
I was just browsing through some of my research folders, and came across an image that i wanted to open. The file is a .png and is 2048x1323, 7.75MB, and previews fine in Windows Fax Viewer. However, when i went to open this in Photoshop CS4 Extended 11.0.1, i got an error message shown below:
http://i151.photobucket.com/albums/s133/rickyt_album/error.png
"Could not complete your request because the file-format module cannot parse the file."
Any help on what this means and how to sort it out? At first i wondered if somhow the image wasn't supposed to be a .png, so i changed it to .jpg, but then i had the expected error of it noticing it isn't a jpg, and .jpg is the only other file format it could possibly be.
Thanks,
Ricky

Today I ran into a simular problem. It was a Tiff though and would not open in PS CS4 with the parse error. May sound weird but I could open it in Corel Paint shop pro X2 with no problems. So when I opened it in X2 I "saved as" the file as a PSD and closed out. Then I opened CS4 and the photo opened just fine. I am sure there is a better way but I didn't have the time to try it. I will mess around with the TIFF file tomorrow to see what is going on.

Export PNG Error:

I want to export my *.indd as PNG. I tried the following code:
function ExportPNG("/c/test)
    try
        app.activeDocument.exportFile(ExportFormat.PNG_FORMAT, File(filePath + '.png'));
    catch(e)
        alert(e);
However, I get the following error:
Error: The specified object does not support the desired export format.
How can I fix this?

Hey!
Maybe this will help you, just change export format.
if(app.selection.length > 1){
    var myObj = app.activeWindow.activePage.groups.add(app.selection);
    myObj.exportFile(ExportFormat.JPG, myFile, false);
    app.activeDocument.undo();
}else{
    app.selection[0].exportFile(ExportFormat.JPG, myFile, false);
Hope it helps.
tomaxxi
http://indisnip.wordpress.com/

Problem saving png error (Hex 0xBFF604A5) File not found.

Does anyone have some insight into how to correctly save a .png file that I grabbed from an IMAQ image? I've been trying to use IMAQ write file 2.vi, but it doesn't seem to be able to create a file. My code works fine if I pass it an existing .png file to write to, but it chokes once I tell it to save the image to a non-existing file. I'm not very familiar with the IMAQ file I/O, but I assumed (wrongly) that it would work the same as the normal Open/Close file vi's that you can give write/replace/create permission to. I attached my vi (sorry it's kind of a mess at this point). Any suggestions? Thanks,
John
Attachments:
Grab and annotate pic.vi ‏127 KB
graph and annotate pic.PNG ‏96 KB

drummerguy-
We have encountered this problem before. Typically the solution is checking the permissions.
-The most common reason is if you don't have 'write' privileges in the folder you are trying to write to.
*If are unsure about this, you can check by trying to create a new file manually through windows explorer in the directory that LabVIEW is trying to write a file to. If you can create a file there, but LabVIEW cannot, then we can try something else.
-Another possible reason is if you have any illegal characters in your filename such as "%, /, \"
*A good filename would be something like "C:\test\test.png" for PNG files. If you are writing to a specific file type, could you try to write to a different type (JPEG, PNG, TIFF, BMP) and see if you get the same results?
I would try these things first and see it your problem persists. I hope this works for you
Sam S
Applications Engineer
National Instruments

Can't publish iWeb due to .png error

can't publish iWeb due to .png error

With as many people that have this same issue, I am very surprised that support is still sleeping at the wheel. Some of the suggestions border on the absolute absurd (e.g. create new user account, check the system clock, etc.). I've tried them all, including exclusion from AVAST, resetting router, etc etc etc. iCloud status shows all green.
As the owner of a software development company, I find it hard to believe Apple, of all support, has been unable to get this issue resolved once and for all. It would certainly make sense, as well, to collate this issue into a single thread instead of bouncing users off the moon and back.
I spent 1/2 day on the phone with Apple support trying to get iTunes to backup and was promised a call back from the next tier of support. That was 4 months ago and I still haven't been able to backup my iphone 4S. I've never seen software that is more kludgy and unreliable with every passing upgrade (sorry, but it's the truth)!
After two years of not being able to back up my phone, I am considering going to a more reliable platform. After 6 years on the Apple bus, maybe it's time to get off.
Mike Maurer, [email protected]

Error uploading or updating site

Hi and thank you.
When I go to update or upload my site, I get the following message:
PUBLISH ERROR
Can’t create the file “01_2008_Welcome_01.png.” The disk may be damaged or full, or you may not have sufficient access privileges.
I did a google search and believe this png file is the background image design of my site. I've tried switching the first page's design template to another and then back to the leaf design, but I get the same message. I would upload a different image file in its place, but don't have means that I know of to get another copy of this png file. I don't want to change designs because this is the basis of my entire design AND I have about 30 pages and redoing every page with this template switch method would be very painful indeed.
Can anyone help? Thank you so much in advance.

I have done this with no luck. I had deleted all of the folders in my FTP and tried to re-upload them but I am thinking I deleted something that I shouldn't have and I have no idea what. Is there any way to find out what files I need to have my website running correctly? My site has been down for almost 2 weeks now and I really to get it back up.

I am getting an error when I try to publish that says "Can't create the file "Mod_footer_bg.jpg." How do I fix this?

I was previously getting the droppedimage.png error, but I deleted all of my PNG's and I looked up how to fix that one. The problem is that now I am getting a "Mod_footer_bg.jpg" error when I attempt to publish my site (both the the FTP Server as well as to a local folder). I checked out the HTML using cyberduck, and I see that the Mod_footer_bg.jpg's are the footers of each of my pages. I went through all of my pages and made the "footer height" zero. This did not work, so what do I need to do to fix this? Thanks!

I can offer a shotgun effect fix but don't know if any a definite fix for this. Try the following:
close iWeb.
delete the iWeb preference file, com.apple.iWeb.plist, that resides in your Home/Library/Preferences folder.
go to your Home/Library/Caches/com.apple.iWeb folder and delete its contents.
reboot.
launch iWeb and try again.
If that doesn't help continue with:
move the domain file from your Home/Library/Application Support/iWeb folder to the Desktop.
launch iWeb, create a new test site, save the new domain file and close iWeb.
go to the your Home/Library/Application Support/iWeb folder and delete the new domain file.
move your original domain file from the Desktop to the iWeb folder.
launch iWeb and try again.
OT

Consuming Websphere Portlets in spaces using WSRP WSDL url gives error.

Sr#3-6516739281
Ver- 11.1.1.6.0 spaces.
Hi ,
Customer consuming a websphere portlets in spaces
Producer: Websphere portal server
Consumer - Webcenter spaces 11.1.1.6.0
WSDL url - http://192.168.0.50:9080/producer/wsdl/wsrp_service.wsdl
WSRP 2.0 portlets hosted on IBM WebSpere application server (v. 7.1) are not rendered at all in spaces. Registration part goes fine and when click the test button after registration it says successful.
but when we go the spaces page the portlet is not rendered and says - Portlet consumer error and the following stack trace traced in spaces server logs .
The thrown exception is:
<3-Dec-2012 4:21:33 o'clock PM EST> <Error> <oracle.portlet.binding> <BEA-000000> <An error has occured for Portlet Binding portlet2581387127.
oracle.adf.model.portlet.binding.PortletModelException: Unable to get portlet response (Internal Error) for portlet binding portlet2581387127.
     at oracle.adf.model.portlet.binding.PortletBinding$InnerPortletModel.getPortletRendition(PortletBinding.java:1476)
     at oracle.adfinternal.model.portlet.binding.ActivityPortletModelWrapper.getPortletRendition(ActivityPortletModelWrapper.java:151)
     at oracle.adfinternal.view.faces.renderkit.rich.portlet.PortletRenderer.encodeAll(PortletRenderer.java:916)
     at oracle.adf.view.rich.render.RichRenderer.encodeAll(RichRenderer.java:1396)
     at org.apache.myfaces.trinidad.render.CoreRenderer.encodeEnd(CoreRenderer.java:341)
     at org.apache.myfaces.trinidad.component.UIXComponentBase.encodeEnd(UIXComponentBase.java:767)
     at javax.faces.component.UIComponent.encodeAll(UIComponent.java:937)
     at org.apache.myfaces.trinidad.render.CoreRenderer.encodeChild(CoreRenderer.java:405)
     at oracle.adf.view.rich.render.RichRenderer.encodeChild(RichRenderer.java:2633)
     at oracle.adfinternal.view.faces.renderkit.rich.customizable.PanelCustomizableRenderer.encodeChildrenVertically(PanelCustomizableRenderer.java:1039)
     at oracle.adfinternal.view.faces.renderkit.rich.customizable.PanelCustomizableRenderer.encodeAll(PanelCustomizableRenderer.java:350)
     at oracle.adf.view.rich.render.RichRenderer.encodeAll(RichRenderer.java:1396)
     at org.apache.myfaces.trinidad.render.CoreRenderer.encodeEnd(CoreRenderer.java:341)
     at org.apache.myfaces.trinidad.component.UIXComponentBase.encodeEnd(UIXComponentBase.java:767)
     at javax.faces.component.UIComponent.encodeAll(UIComponent.java:937)
     at org.apache.myfaces.trinidad.render.CoreRenderer.encodeChild(CoreRenderer.java:405)
     at org.apache.myfaces.trinidad.rend
This works fine in .net and other consumers.
Please see the screen shots attached to SR-
WCP_PortletProducerRegistration.png - registration screen in spaces
WCP_Error.png - Error when try to see the portlet in spaces page.
WC_Spaces.out -logs with the above error.
We also tried to register this is Jdevelooper. This gives different error in registration it self.
screen shot- JDeveloper-WSRPProducerRegistration.docx
Please shed some light on this to proceed further.

Sr#3-6516739281
Ver- 11.1.1.6.0 spaces.
Hi ,
Customer consuming a websphere portlets in spaces
Producer: Websphere portal server
Consumer - Webcenter spaces 11.1.1.6.0
WSDL url - http://192.168.0.50:9080/producer/wsdl/wsrp_service.wsdl
WSRP 2.0 portlets hosted on IBM WebSpere application server (v. 7.1) are not rendered at all in spaces. Registration part goes fine and when click the test button after registration it says successful.
but when we go the spaces page the portlet is not rendered and says - Portlet consumer error and the following stack trace traced in spaces server logs .
The thrown exception is:
<3-Dec-2012 4:21:33 o'clock PM EST> <Error> <oracle.portlet.binding> <BEA-000000> <An error has occured for Portlet Binding portlet2581387127.
oracle.adf.model.portlet.binding.PortletModelException: Unable to get portlet response (Internal Error) for portlet binding portlet2581387127.
     at oracle.adf.model.portlet.binding.PortletBinding$InnerPortletModel.getPortletRendition(PortletBinding.java:1476)
     at oracle.adfinternal.model.portlet.binding.ActivityPortletModelWrapper.getPortletRendition(ActivityPortletModelWrapper.java:151)
     at oracle.adfinternal.view.faces.renderkit.rich.portlet.PortletRenderer.encodeAll(PortletRenderer.java:916)
     at oracle.adf.view.rich.render.RichRenderer.encodeAll(RichRenderer.java:1396)
     at org.apache.myfaces.trinidad.render.CoreRenderer.encodeEnd(CoreRenderer.java:341)
     at org.apache.myfaces.trinidad.component.UIXComponentBase.encodeEnd(UIXComponentBase.java:767)
     at javax.faces.component.UIComponent.encodeAll(UIComponent.java:937)
     at org.apache.myfaces.trinidad.render.CoreRenderer.encodeChild(CoreRenderer.java:405)
     at oracle.adf.view.rich.render.RichRenderer.encodeChild(RichRenderer.java:2633)
     at oracle.adfinternal.view.faces.renderkit.rich.customizable.PanelCustomizableRenderer.encodeChildrenVertically(PanelCustomizableRenderer.java:1039)
     at oracle.adfinternal.view.faces.renderkit.rich.customizable.PanelCustomizableRenderer.encodeAll(PanelCustomizableRenderer.java:350)
     at oracle.adf.view.rich.render.RichRenderer.encodeAll(RichRenderer.java:1396)
     at org.apache.myfaces.trinidad.render.CoreRenderer.encodeEnd(CoreRenderer.java:341)
     at org.apache.myfaces.trinidad.component.UIXComponentBase.encodeEnd(UIXComponentBase.java:767)
     at javax.faces.component.UIComponent.encodeAll(UIComponent.java:937)
     at org.apache.myfaces.trinidad.render.CoreRenderer.encodeChild(CoreRenderer.java:405)
     at org.apache.myfaces.trinidad.rend
This works fine in .net and other consumers.
Please see the screen shots attached to SR-
WCP_PortletProducerRegistration.png - registration screen in spaces
WCP_Error.png - Error when try to see the portlet in spaces page.
WC_Spaces.out -logs with the above error.
We also tried to register this is Jdevelooper. This gives different error in registration it self.
screen shot- JDeveloper-WSRPProducerRegistration.docx
Please shed some light on this to proceed further.

[BUG] Problem with Error message handling in JDeveloper 11.2.1.0

Hello!
I'm Daniel from Brazil.
I have been facing a problem recently to which I see no solution. I need to use a specific component called 'Panel Label and Message' in order to nest three other components which need to be grouped together to work properly (an input text box, a LOV calling 'search button', which searchs and populates the input box, and an output text box which displays text depending on the input field). This works fine!!
The problem comes when I try to place an Access Key that should focus on the input text box part of the group component. In order to do that, I put it on the 'Panel Label and Message' component, and set the 'for' property to the input text box. This too works fine, as when I access it the component redirect the focus to the right place.
Problem is, when the user decides to this specific field (which is required) blank, JDev has problems handling the actual name of the component, and just calls it 'Component', as the screenshots below show. Apparently, for the other error messages that are handled by myself or generated by other means, it deals with the component's actual name just fine. Is there any way around this? Thanks!
'Panel Label and Message' component properties. it9 is the id of the 'Input Text' field component. Access Key set to F.
http://img.photobucket.com/albums/v82/myfireburnsblack/PropertiesErrorBug.png
Error message I get (it's in portuguese). Field has been left blank, and JDev says I have to put something in, but refers to the field as 'Component'. Any other error is handled correctly, as far as I've tested.
http://img.photobucket.com/albums/v82/myfireburnsblack/jdevError.png

Hi Daniel,
You're not the only one who has seen this: {message:id=9938606}
As mentioned in that other thread - I had tested similar use cases and it works for me.
Do you have access to https://support.oracle.com to file an SR?
John

Error CreateImage in for loop array

Hi,
I would like to dynamically create images inside a for loop. It dependent on the array_size that the sevlets will send. Snapshots of code:
for (int i = 0; i < ARRAY_SIZE; i++)
img[i] = Image.createImage("\"/nike" + (i+1) + ".png\"");
}Error:
java.io.IOException
     at javax.microedition.lcdui.ImmutableImage.getImageFromStream(+15)
     at javax.microedition.lcdui.ImmutableImage.<init>(+20)
     at javax.microedition.lcdui.Image.createImage(+8)
     at SlidesCanvas.createImages(+138)
     at SlidesCanvas.<init>(+146)
     at ListSlides.commandAction(+113)
     at javax.microedition.lcdui.Display$DisplayAccessor.commandAction(+282)
     at javax.microedition.lcdui.Display$DisplayManagerImpl.commandAction(+10)
     at com.sun.midp.lcdui.DefaultEventHandler.commandEvent(+68)
     at com.sun.midp.lcdui.AutomatedEventHandler.commandEvent(+47)
     at com.sun.midp.lcdui.DefaultEventHandler$QueuedEventHandler.run(+250)
Is this a known bug in CreateImage? Or am i doing it in a wrong way?

Herlena
I tried this, it works.
for (int i = 0; i < ARRAY_SIZE; i++) {
    img[i] = img.createImage("nike" + (i+1) + ".png");
Hope your problem is solved, Darryl

Exact fetch returns more than requested number of rows oracle error ; unable to find where exactly throwing error in the below code.

hi i am receiving "exact fetch returns more than requested number of rows oracle error". but i am not able to locate the error in the below code. Any help would be appreciated!!!
CREATE OR REPLACE PROCEDURE load_scene_collection_item (
--pdname                                  VARCHAR2,
-- LOCATION TO ADD/CHANGE below!!!
pITEM_TYPE_ID                      INTEGER,
pSCENE_COLLECTION_ID        INTEGER,
pCOLLECTION_ITEM_NAME     VARCHAR2,
pCOLLECTION_ITEM_DESC      VARCHAR2,
pDEFAULT_COORD_X      NUMBER,
pDEFAULT_COORD_Y      NUMBER,
pDEFAULT_COORD_Z      NUMBER,
pDEFAULT_WIDTH            NUMBER,
pDEFAULT_HEIGHT            NUMBER,
pDEFAULT_ROTATION      INTEGER,
pDEFAULT_ALPHA            INTEGER,
pfname                                 VARCHAR2)    IS
src_file BFILE;
dst_file BLOB;
lgh_file BINARY_INTEGER;
BEGIN
src_file := bfilename('BUSINESSBLOBSIMAGES', pfname);
-- insert a NULL record to lock
Insert into SCENE_COLLECTION_ITEM
   ( ITEM_TYPE_ID,
   SCENE_COLLECTION_ID,
   COLLECTION_ITEM_NAME,
   COLLECTION_ITEM_DESC,
    COLLECTION_ITEM_IMAGE,
   DEFAULT_COORD_X,
   DEFAULT_COORD_Y,
   DEFAULT_COORD_Z,
   DEFAULT_WIDTH,
   DEFAULT_HEIGHT,
   DEFAULT_ROTATION,
   DEFAULT_ALPHA,
    CREATE_USER,
    CREATE_DATE)
Values    ( pITEM_TYPE_ID, pSCENE_COLLECTION_ID, pCOLLECTION_ITEM_NAME, pCOLLECTION_ITEM_DESC, EMPTY_BLOB(),
   pDEFAULT_COORD_X,
   pDEFAULT_COORD_Y,
   pDEFAULT_COORD_Z,
   pDEFAULT_WIDTH,
   pDEFAULT_HEIGHT,
   pDEFAULT_ROTATION,
   pDEFAULT_ALPHA,
sys_context('USERENV', 'OS_USER'),
sys_extract_utc(systimestamp))
RETURNING COLLECTION_ITEM_IMAGE INTO dst_file;
-- LOCATIONs(2) TO ADD/CHANGE above!!!
-- lock record
SELECT COLLECTION_ITEM_IMAGE
INTO dst_file
FROM SCENE_COLLECTION_ITEM
WHERE ITEM_TYPE_ID     = pITEM_TYPE_ID
AND SCENE_COLLECTION_ID = pSCENE_COLLECTION_ID
AND COLLECTION_ITEM_NAME= pCOLLECTION_ITEM_NAME
AND COLLECTION_ITEM_DESC= pCOLLECTION_ITEM_DESC
AND    pDEFAULT_COORD_X = DEFAULT_COORD_X
AND   pDEFAULT_COORD_Y = DEFAULT_COORD_Y
AND   pDEFAULT_COORD_Z = DEFAULT_COORD_Z
AND   pDEFAULT_WIDTH    = DEFAULT_WIDTH
AND   pDEFAULT_HEIGHT   = DEFAULT_HEIGHT
AND   pDEFAULT_ROTATION = DEFAULT_ROTATION
AND   pDEFAULT_ALPHA    = DEFAULT_ALPHA
FOR UPDATE;
-- LOCATION TO ADD/CHANGE above!!!
-- open the file
dbms_lob.fileopen(src_file, dbms_lob.file_readonly);
-- determine length
lgh_file := dbms_lob.getlength(src_file);
-- read the file
dbms_lob.loadfromfile(dst_file, src_file, lgh_file);
-- update the blob field
UPDATE SCENE_COLLECTION_ITEM
SET COLLECTION_ITEM_IMAGE = dst_file
WHERE ITEM_TYPE_ID     = pITEM_TYPE_ID
AND SCENE_COLLECTION_ID = pSCENE_COLLECTION_ID
AND COLLECTION_ITEM_NAME= pCOLLECTION_ITEM_NAME
AND COLLECTION_ITEM_DESC= pCOLLECTION_ITEM_DESC
AND    pDEFAULT_COORD_X = DEFAULT_COORD_X
AND   pDEFAULT_COORD_Y = DEFAULT_COORD_Y
AND   pDEFAULT_COORD_Z = DEFAULT_COORD_Z
AND   pDEFAULT_WIDTH    = DEFAULT_WIDTH
AND   pDEFAULT_HEIGHT   = DEFAULT_HEIGHT
AND   pDEFAULT_ROTATION = DEFAULT_ROTATION
AND   pDEFAULT_ALPHA    = DEFAULT_ALPHA
-- LOCATION TO ADD/CHANGE above!!!
-- close file
dbms_lob.fileclose(src_file);
END load_scene_collection_item;
Thanks in advance!!!!

Hi PaulHorth,
Thanks for the quick reply.
Actually, i am getting error while updating the records.
below is the error message:
Error starting at line 1 in command:
exec load_scene_collection_item(3,15,'2 Lane 4way Stop','4 Way Stop Intersection with 2 lanes in each direction',0,0,0,400,517,0,1,'2 Lane 4way Stop.PNG');
Error report:
ORA-01422: exact fetch returns more than requested number of rows
ORA-06512: at "DP_OWNER.LOAD_SCENE_COLLECTION_ITEM", line 55
ORA-06512: at line 1
01422. 00000 - "exact fetch returns more than requested number of rows"
*Cause:    The number specified in exact fetch is less than the rows returned.
*Action:   Rewrite the query or change number of rows requested

Assertion failed in file error

I am using the Muse CC 2014 on Windows 8. Need to fix this bug:
Location: Master Page
Click on Browser fill
Select background file. *.png
Error message
When I restart Muse, the background image is there.
Has anyone else seen this. Any suggestions for resolving?

Thank you for the very clear writeup. You're one of a few people who are reporting hitting this particular error. Unfortunately, thus far we haven't been able to figure out how to reproduce this error ourselves, in order to be able to fix it.
Is there any chance you could create a screen recording of you reproducing the error? Our current suspicions are that it may be dependent on exact timing, mouse locations, panel configuration or some other machine or user-specific factor that we're failing to reproduce internally. A screen recording may provide the details we need in order to be able to reproduce and fix this.
A screen recording tool with a free trial plan that I use occasionally is http://www.screencast.com. There are many others.

Error when trying to set FF8 as default browser (uninstall/helper.exe unable to connect)

I've recently installed Firefox 8 alongside Firefox 3.x using a different profile. However, when I try to open a link from Outlook, it totally resets my profile. I didn't have this problem with Firefox 5 alongside 3. I have FF3 installed in the main Firefox program files folder, and Firefox 8 in a sub-folder within that one (FF5 also has an installation folder in there).
In the options when I check the box to set Firefox 8 as the default, I get the following error:
[http://i.imgur.com/82TnP.png error image]
I should mention, this only happens when launching Firefox. If the browser is already open, it'll open the link in the current window just fine.

Thanks, I've done that, however the problem is when I try to open a link from an external program (like Outlook, DestroyTwitter, etc) that launches Firefox when it wasn't already running. For some reason it's getting hung up since I have more than one version installed and thus launches Firefox (sometimes 3, sometimes 8) and each time it appears to completely reset the profile, ignoring the one I had set.
My "FF8" profile is current set as default in the profiles.ini.
I don't understand why it keeps trying to load the uninstall\helper.exe when I try to set 8 as the default in the options menu.

01_2008_Welcome_01.png error

Similar Messages

Maybe you are looking for