0102 inspection type missing

Hi,
I found that 0102 inspection type is missing in ECC 6.0 in my development client. But it is available in IDES when I checked it. Is there any specific reason why which this inspection type is removed.
01- Goods Receipt
0101- Goods Receipt- Model
0102- good sreceipt- Prelimimary (Missing)-----Any reason why which its removed or any other issue its not there
0103- External processing
It can be customized, but please tell me why its not now as , it used to come as default earlier.
Thanks and Regards
J

Thanks Sujith,
Offcourse I worked with 0101, 0102 and 01 in the 3 stage approval process in automotive insutstry. But I got a buit surprised when I couldnt see 0102 in inspn type list or in status profile.
Anyway we can customize it and create a status profile. But its my curiosity to know whether 0102 is removed by SAP for some reason.
IDES, if I check in status profile, assignment of inspn type 0102 inspection type is assigned against preliminary inspection.
But in development ECC 6.0, 0102 inspection type not available, to make sure its not deleted, I cross checked in status profile, inspection type assignment and there also 0102 is not available.
Anyway, i am closing this thread, thanks for your thoughts.
Thanks
J

Similar Messages

Cannot create copy of Std inspection type 08 (Stock transfer inspection)

Dear All:
I have created a copy of std inspection type 08 as Z08CP. I have made all the relevant assigments in IMG such as Maintain Inspection Lot Origins and Assign Inspection Types, Default values, etc.
During my unit testing I did use the newly created Z08CP but I have noticed I keep getting the error message " Change the inspection stock of material XXXXX in QM only" BUT THE MOMENT I SWITCHED THE MATERIALS MASTER BACK TO inspection type 08 the problem is gone. Only when I have the std inspection type in the material master I am allow it to post a MB1b (322) and created the inpscetion lot in the background
Weird !!
Any ideas.
Regards,
Mauricio

Let me see if i understand exactly what you guys are saying.
Following entries have been made in IMG
1. Plant dependent QM settings. Inspection Type for Available Stock in Quality Inspection field is empty
2. Maintain Inspection types: Created Z08CP as copy of 08
3. Maintain Inspection Lot Origins and Assign Inspection Types. For lot origin 08. created the following relationship
Lot Origin 08
01 08 Stock transfer inspection
02 Z08CP Prod Defect: Stock transfer inspection
4. Default values for inspection type. Copied default values from 08 to Z08CP
Note i did not make any changes to IMG section "Inspection for Goods Movements"
I tried again and same error was displayed. what is that I am missing here?
Regards,

Inspection type 03 - PP/PI not creating auto inspection lot

Hello Experts,
I've read the Best Practices for PP and QM master data, as well as the BPs for Creating and Completing inspection lots.
I have 03 activated for my inspection type usage.
When the PO is released, I am not seeing an auto inspection lot.
Please suggest the troubleshooting steps to solve this issue. Some are auto creating and some are not, but my QM MData is correct for inspections...
Thanks
Verroz

Hi Craig,
I guess 'Insp. Char. required' in control key flagged or not, does not affect Inspection lot creation.
I just checked for existing 03 inspection lots and we do not have this field flagged.
My understanding is also based on F1 help which states
In the following situations, consistency check for the task list generates a warning message:
if you set the indicator in the control key but have not maintained
inspection characteristics for the operation or phase
if you have not set the indicator in the control key but have maintained
inspection characteristics for the operation or phase
Or have I missed something here?
Amol.

Inspection type 03 and QM order

Dear
1.I am not able to assign QM order QL01 by t code QK01 to my finished product to which in material master is activated for inspection type 03
in material master's inspection set up data QM order text box is missing
Pls help me to solve this issue
2.For a single material is it possible to assign different order type for example QL01 for Appraisal cost and QN01 for Non confirmation cost
Thnks in advance
Faisal

1.I am not able to assign QM order QL01 by t code QK01 to my finished product to which in material master is activated for inspection type 03
>In SAP standard the activities for the inspection type '03' are allocated into production order.
>Therefore you cannot assign any QM order to inspection type '03'.
2.For a single material is it possible to assign different order type for example QL01 for Appraisal cost and QN01 for Non confirmation cost
>You don't need to assign the order type 'QN01' into material master.
>The order 'QN01' is assigned to a quality notificaion manually or by configuration.
>QCC0 > Quality Notifications > Notification Processing > Define Costing Parameters > Account Assignment for QM Orders
>Also check SAP help portal.
>http://help.sap.com/saphelp_erp60_sp/helpdata/en/2d/351c93448c11d189420000e829fbbd/content.htm
Regards
Luke

STANDARD BEHAVIOUR OF INSPECTION TYPE 03

Hi All,
I am implementing Inprocess Inspection Points for a Material.
1) I have enabled QM view of MM with Inspection Type 03.
2) I have created Routing and assigned Inspection Characteristics for operations.
When I release the Production order, I have Lot created in Quality Inspection.I now do a operation confirmation at the last operation in the routing.
I do a Result recording but I dont do a UD. I now do GR for the Production Order.
It moves the stock to Unrestricted from Quality while I still have Inspection Lot in QA32 without UD done.
Q1. Is this a standard SAP behaviour or I am missing out something. If this is a standard behaviour why will any body clear Inspection Lot created under this inspection Type. It is after all not stalling the process.
Q2. I learn that Inspection type 03 is not relevant for Stock. What does this mean ?
Any important pointers will be appreciated.
I am confused. Please help.
Thanks,
Rahul.

Dear Rahul
You have understood it correctly
2) Let me answer your second question first - 03 inspection is not stock specific. this is because you dont have a stock posting tab (unrestricte, block etc) in this inspection tab as you have in 01 or 04 inspection. here you do only confirmation of quantity. Hope you understood
1) 03 inspection is to assisst people in recording result for during process. It is doesnt hold any stock.It gives you a control over operation confirmation where you can practise Rework order , calculation of First pass yield etc. It also helps in some processing companies if they need to do result recording after every 1 hour or after some fixed quantities have been made.
But 03 inspection can be made effective if you have follow the below.
1) All Operation confirmation are mandatory for doing the GR of the order
2) Operation sequencing should be mandatory so that people dont skip QM operation and confirm operation next to QM Operation.
3) also there can be link made between 04 inspection and 03 inspection so that to give UD for 04 inspection you have to mandatorily give UD for 03 inspection
Hope this throws some light.
please let me know your feedback
Regards
gajesh

Follow up action 14 Inspection Type- Equipment status change

could anyone tell me which follow up action for 14 inspection type is to be bought into for changing Equipment Availablity status to Non Availability status when I reject calibration lot for that particular equipment.

hi
kindly check whether this FM will work for you QFOA_OBJECT_STATUS_SET
regards
thyagarajan

How to maintain inspection type at the time of material creation using LSMW

Hi All,
I have a differnet Issue.
I am using a std. LSMW to create the materials.
But now using same LSMW i have to maintain Inspection types(ART-RMQAM) for the materials to be created.
How this can be done.
This filed is not found in any structures like BGR....to BMMH8
Can I create such a structure ??
Amol

Some need the hard answer: it is not possible in one go.
It is an embedded functionality in material master like classification, but it is not stored in a material master table.

While executing in DTP, Conversion Type missing

Hello Sir:
I can see my data is loaded OK in PSA through infopackage. While executing DTP, I get the error "CONVERSION TYPE MISSING" for my keyfigure. any idea for the error, and its fix
Regards

hi mark,
u should have created transformation rule .
1.go to transformation rule.
2.u will have 2 tables one for source second for target table.
3.two tables would be mapped one u give the data source right.
4.here go to that infoobject that asks for the stated error.
5.click the group rule for that infoobject.
6.u find a pop up having conversions from source to target specify wat ever conversion u need and check it out.
if error still persists .
check for u r infobject is it a fixed currency/uom.
try to write a routine for the target conversion in start routine .
thank u.

Link of material movement with inspection type

Hello Masters,
I have scenario where component at shop floor will be segregated for inspection. The requirement is to do result/defect recording for those parts and if required then those parts need to be scrapped. So one way of doing that can be to move those parts to either blocked stock or QI stock (ideal option) or to specific storage location so that planning can be taken care of (if material are still in unrestricted then planning will consider those part as OK part and planning may fail). And to record result/defect we require inspection lot, which can be created by using above mentioned material movement.
But problem is how to create inspection lot so that we can do result/defect recording for those materials and scrap those material.
Please note that material master will have QM setup active (inspection type 01 - Goods Receipt Insp. for Purchase Order) and hence we can move material from unrestricted stock to QI stock only through QM.
I am not sure if we should use inspection type 08 - Stock transfer inspection, as there can be many instances of material transfer within plant. And with inspection type 08 active, system will create inspection lot every time there is any material transfer.
One way can be to create new goods movement only for this kind of transfer and new inspection type and link both together. So that when ever material is transferred using that particular goods movement, system creates inspection lot as well as material will be in QI stock. But I am not sure how this is possible or not and if yes then how this can be done.
I know query was too long to read and I think I was clear enough to explain what the requirement is.
It would be great if I can get some guidance from you masters at the earliest convenience as it is bit of importance.
Thanks and regards,
Devang

Hi Devang,
I guess this is Line rejection scenario. Correct me if understanding goes wrong. You have okayed the material against 01 inspection lot and UD has been given. Now you find this material defective on shop floor.
I think the 2nd option suggested by marwadi sounds better. I suggest one more possibility, just check whether feasible.
1.     Create quality notification Q2 type through QM01. While creating you can give references of original PO and material document, which fetch vendor name and material code automatically.
2.     Record defects and all other required information in notification.
3.     After this, you find an option in action box, transfer post unrestricted - >block . Click there. This will transfer the stock from unrestricted to block.
4.     If you want planning persons should not consider this stock as OK, remove block stock from MRP stock availability check. As a result of which stock lying in block will not be considered as available stock.
5.     From block stock you can send this material back to vendor through MIGO. Otherwise you can create return delivery from notification through action box also. Check what is feasible in your case.
Here you need not create inspection lot, no need to use any user exit.
Regards,
Anand Rao

Inspection lot creation for inspection type 05

Hi Gurus,
We have finished material FERT & semifinished material HALB.We have assigned insp. type 02 & 05 in material master of matl. HALB.When we create production order for FERT & confirm the order , inspection lot is generated for matl.HALB of inspection type 02.
Now we are reversing the goods issue by movement type mb1a, movement 262.In customizing for movement 262 inspection lot origin 05 is assigned.
My problem is that when i reverse the goods issue with mvmt.262, inspection lot is not created for insp. type 05. What should be the reason behind this? or are any changes to be done to above setting?
Regards
Ram

Hi Ram,
Just check the SPRO setting SPRO---> Quality Management ->Quality Inspection->inspection lot creation--->inspection for goods movement --->deactivate quality inspection for a movt type.
Here against movt type 262 uncheck the QM not active tick.
It will solve your problem.
Cheers,
Tushar

Inspection type 01 - inspection lot creation based on vendor batch number

Hi Guys,
this topic has been discussed several times here, but I was not able to find a suitable answer for my question.
I am facing the folowing requirement:
I have activated inspection type 01 for a raw material.
I am receiving a firs goods receipt from vendor A with vendor batch number 0001.
The system creates its own goods receipt batch number 0546 based on internal numbering.
A new inspection lot is created.
I am posting a second goods receipt from vendor a with vendor batch 0001.
The system creates a new batch number 0547 based on internal numbering.
A new inspection lot is created.
I do not want to get the second inspection lot, because I received vendor batch 0001 before and I am assuming it has been inspected or is in inspection.
Option 1: Post the second goods receipt against the first internal batch number created.
I am aware of this need at the moment, but a user is not always checking if there is an internal batch with the same vendor received before.
Can I customize the system to create inspection lots based on the fact that the vendor batch number was received before?
Or do I have to use an exit and some ABAP code to get the wanted result?
Thanks for your advice in advance.

You need to use one of the enhancements that Do-Wook has suggested. There is no standard SAP way to suppress the inspection based on the vendor batch number.
With the first enhancement you use the system to check for a previously received vendor batch and if one is found, then that batch number is proposed and not the next one from the numbering series. In this case, the lot isn't created than due to the inspection lot control of the inspection type.
With the second enhancement you check the vendor batch number and if it's been received you suppress the inspection lot creation and the stock goes right to unrestricted.
You'll probably need to do one or the other. Myself, I prefer the first enhancement.
Craig

Mass creation of Inspection types

Dear QM gurus
How to create the inspection types in mass processing?
For example I have to assigne inspection type 05 for 100(with activation of Inspection Type indicator) materials (the material masters are already created )
is there any method?Without using BDC or LSMW can i do it by MASS or MM17?
Thanks
MK

There is std T code available for activation of Inspection type in SAP-QM
Use T code QA08
Enter Material & plant and Inspection type with mass processing.
Regards
Sujit

Creation of inspection type (mm02 insp.setup) in mass

Hi All,
Is there a way of creating inspection type for all materials via mass update.
It is in the Quality management view of mm02.
Thanks
Venkat

Hi
Try to use trx MASS
Max

GR Purchase Order to Blocked Stock / Inspection Type 01

Hi all,
I want to receive 100 KG of Material X from a purchase order: 95 KG to Quality Inspection Area and 5 KG to Blocked (Stock Category S)
For the 5 KG to be received to the Blocked Stock, I used movement type 103, the material was received to "GR Blcoked Stock".
Then I used movement type 105 to release it. I chose Stock Type "Blocked".
After posting, the material was received to "Quality Inspection Area" and NOT to Blocked Stock. I think the reason was the Inspection Type 01 was activated, so the material was received by default to Quality Inspection Area.
How can I receive a material directly to "Blocked Stock"?
Regards,
Kifah Yacoub

thank you, but it seems you misunderstood my question.
What i want is: How to receive from purchase order to Blocked Stock (Stock Category S).
I tried movement type 103, but it's not exactly what i want.
Thank you

Digital signatures for calibration inspection (inspection type 14)

Hi,
I want to use digital signatures for results recording and usage decision (ud) when performing a calibration (inspection type 14). Normally you'd set-up the material authorization for digital signatures. But this can't be added to maintenance plans or equipment. Is there any way to set-up digital signatures for calibrations?
Regards,
Maarten

Explore SAP Note 576307
It may help u.

0102 inspection type missing

Similar Messages

Maybe you are looking for