02 card reader controller update

Should I update this on my Qosmio x-Q880 the 03 card reader controller? I have had an error lately periodically on the Nivida driver not responding and recovered?
I did update the Toshiba service station today.
I would probably take it to a computer shop to update the Nivia driver.
I also have the SSD almost full as it always goes to this drive when installing something. I have everything moved off it but software but it won't pop up for me to select what drive to put on. My Microsoft Office tales a lot of space and I will probably have to move this over. Any hints how to get to correct drive? I have never had this problem on my other Toshiba laptops.
Thanks.

Pardon my jumping in with some options and opinions.
This driver doesn't stop responding as much as the other one but..
Maybe something in here is useful.
   "Display driver stopped responding and has recovered" error in Windows 7 or Windows Vista
items I could stop at start-up or running in the background..
If you can find a situation or sequence that makes the problem occur within a reasonable time, you may be able to identify a module in memory that interferes.
   How to perform a clean boot to troubleshoot a problem in Windows Vista or Windows 7
I thought of CC Cleaner but not sure if that would speed it up or mess it up.
I recommend you stay away from registry cleaners.
I was going to change the Performance tools setting to Adjust for best performance but was not sure of that either.
That won't hurt a bit and may very well solve your problem. We're talking about this setting.
   System Properties (sysdm.cpl) > Advanced tab > Settings button (under Performance) > Visual Effects tab
Try setting Adjust for best performance and see what happens.
And it won't hurt to review what's here.
   Optimize Windows 7 for better performance
-Jerry

Similar Messages

Realtek USB 2.0 Card Reader Driver Update

I ran an HP Hardware Diagnostic Tools test on my USB card reader and I got errors on every test.
I am running Windows Vista 32 bit system.
I went into the device manager and tried to update drivers, but it says that is the latest driver.
My card reader is always has the green light on even when I'm not using it. I couldn't find an updated driver on the HP site or the Realtek site.
If I install any of the driver update programs, it tells me that my driver is out of date, but I have to buy their program to get the update.
Any suggestions?

Hi:
Unfortunately, I wouldn't know why the light is always on in your card reader.
Does the card reader work?
Probably it thinks it has a card in one of the read slots.
One of the read heads might be damaged.

Satellite A300 - dvd, usb and card reader will not work

Help required please.
Have a A300 Satellite laptop, running vista.
Until a couple of weeks ago all good, then noticed the dvd/cd did not recognized and disc in it. The card reader cannot find anything on the card (and yes the card was full).
The usb scanner is recognized as a external memory card and the other usb port does not fuction.
I have not installed or cannot remember changing settings or doing anything out of the usually.
Any help or thoughts would be appreciated.

Hi
Your posting is very confusing.
> Until a couple of weeks ago all good, then noticed the dvd/cd did not recognized and disc in it.
Well, there are many reasons for that; it could be possible that inserted disk is not fully compatible. Try different disks from different manufacturers.
It could be also possible that laser lens of the ODD is dirty. In such case you could clean it using a cotton-wool tip and alcohol. In my case this helped.
> The card reader cannot find anything on the card (and yes the card was full).
Did you use a compatible card? The notebook handles these cards:
SD Card 8MB - 2GB
SDHC Card - 4GB
xD picture card - 16MB-2GB
Memory Stick - 8MB-256MB
Memory Stick Pro - 256MB-2GB
MultiMediaCard - 8MB-1GB
miniSD (with SD adapter) - 32MB-2GB
I would also recommend to format the card and to copy some files from computer and then to test this.
You could also reinstall and update the driver for card reader controller...
> The usb scanner is recognized as a external memory card
Cannot believe that You should use a scanner software (should be provided with the scanner) and should test this device. By the way; mostly a scanner driver needs to be installed in order to use this

Satellite P300-1C9 - SD Card reader code 10

Hi All,
I have a new Toshiba P300-1C9, well six months old, and have just for the first time tried an SD card in the digital media card slot.
The card is not showing in "my computer". In device manager it is showing with the yellow fault sign warning of a problem.
Double clicking it gives this message "This device cannot start code 10" In Disc Management the card is not listed in the upper pane but is showing as a drive in the lower pane without a drive letter being assigned.
If I try to assign a drive letter I get a message saying the operation failed to complete because the Disc Management console view is not up to date.
It requests refreshing the view using the refresh task. That does nothing.
I have reinstalled the drivers for the SD Card listed under disk drives when the card is in, for the storage Controllers and the Generic volume listed under Storage volumes. Also I have updated the driver for SD host adaptors.
A card format has made no difference. I know the card reader is okay as a few days ago I took an up to date image with Acronis TI and then reinstalled the OS from the recovery media. The card worked fine then. I've now put the Acronis image back and the card isn't working. I've had loads of driver updates along the way from Toshiba for various things (but not the media card reader) via their Tempro service including a bios update.
I am wondering if the bios update caused the problem. I am debating whether to put the bios back to the default setting.
I have tried everything I can think of, and followed a number of suggestions after googling the problem. The MS Knowledge Base wasn't very helpful and a lot of people seem to have the same problem. I am now at a complete loss.
Thanks,
cheven
Any ideas would be most welcome.
Thanks.

Hi
Generally the Error code 10 means that the device cannot start.
Your card reader is not ready and does not run and therefore the SD card cannot be used and is not recognized in My Computer.
In most cases the driver update/reinstallation should help to sort put this issue.
The Satellite P300-1C9 belongs to the PSPCCE series.
The Toshiba European driver page provides the Card Reader Controller driver for this notebook model. This is the driver which controls the SD card slot.
I recommend downloading this driver. Then access the device manager and uninstall the previous installed driver. Then reboot the notebook.
After new reboot the OS should search for a new device and should ask for the necessary driver.
Then you should point to the driver which you have downloaded and should finish the installation.
Usually this should solve your problem.

[SOLVED]Laptop Internal SD card reader no longer working

Two weeks ago I purchased a Raspberry Pi and set up my own SD card with Arch Linux ARM using the directions at http://archlinuxarm.org/platforms/armv6/raspberry-pi with the internal SD card reader on my laptop and had no issues. Today I decided to load up a XBMC distro to a new SD card, but my internal card reader doesn't seem to autodetect or mount my new card. I tried inserting my other card with Arch ARM that I know is a good card, but it no longer works with that card either. Here are all my logs that I could think of to post for any advice:
uname -r
3.9.8-1-ARCH
lspci
00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub (rev 03)
00:01.0 PCI bridge: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express PCI Express Root Port (rev 03)
00:1b.0 Audio device: Intel Corporation NM10/ICH7 Family High Definition Audio Controller (rev 02)
00:1c.0 PCI bridge: Intel Corporation NM10/ICH7 Family PCI Express Port 1 (rev 02)
00:1c.2 PCI bridge: Intel Corporation NM10/ICH7 Family PCI Express Port 3 (rev 02)
00:1c.3 PCI bridge: Intel Corporation NM10/ICH7 Family PCI Express Port 4 (rev 02)
00:1d.0 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #1 (rev 02)
00:1d.1 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #2 (rev 02)
00:1d.2 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #3 (rev 02)
00:1d.3 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #4 (rev 02)
00:1d.7 USB controller: Intel Corporation NM10/ICH7 Family USB2 EHCI Controller (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2)
00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge (rev 02)
00:1f.2 IDE interface: Intel Corporation 82801GBM/GHM (ICH7-M Family) SATA Controller [IDE mode] (rev 02)
00:1f.3 SMBus: Intel Corporation NM10/ICH7 Family SMBus Controller (rev 02)
01:00.0 VGA compatible controller: NVIDIA Corporation G73M [GeForce Go 7600] (rev a1)
02:00.0 Network controller: Intel Corporation PRO/Wireless 3945ABG [Golan] Network Connection (rev 02)
04:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168 PCI Express Gigabit Ethernet controller (rev 01)
06:00.0 FireWire (IEEE 1394): VIA Technologies, Inc. VT6306/7/8 [Fire II(M)] IEEE 1394 OHCI Controller (rev c0)
06:04.0 CardBus bridge: ENE Technology Inc CB-712/4 Cardbus Controller (rev 10)
06:04.1 FLASH memory: ENE Technology Inc ENE PCI Memory Stick Card Reader Controller (rev 01)
06:04.2 SD Host controller: ENE Technology Inc ENE PCI Secure Digital Card Reader Controller (rev 01)
06:04.4 FLASH memory: ENE Technology Inc SD/MMC Card Reader Controller (rev 01)
lsusb
Bus 001 Device 002: ID 0c45:624f Microdia PC Camera (SN9C201 + OV9650)
Bus 004 Device 002: ID 08ff:2580 AuthenTec, Inc. AES2501 Fingerprint Sensor
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
lsblk
NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT
sda 8:0 0 74.5G 0 disk
|-sda1 8:1 0 9.3G 0 part /
|-sda2 8:2 0 63.3G 0 part /home
`-sda3 8:3 0 1.9G 0 part [SWAP]
sr0 11:0 1 1024M 0 rom
fdisk -l
Disk /dev/sda: 80.0 GB, 80026361856 bytes, 156301488 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk label type: dos
Disk identifier: 0x000f2f32
Device Boot Start End Blocks Id System
/dev/sda1 * 63 19535039 9767488+ 83 Linux
/dev/sda2 19535040 152296199 66380580 83 Linux
/dev/sda3 152296200 156301487 2002644 83 Linux
dmesg | tail
[17198.557922] mmc0: new SDHC card at address aaaa
[17535.391900] mmc0: card aaaa removed
[17537.984043] mmc1: new SDHC card at address aaaa
[18198.208331] usb 4-1: new full-speed USB device number 3 using uhci_hcd
[18199.855227] mmc1: card aaaa removed
[18221.345032] usb 4-1: USB disconnect, device number 3
[18473.771242] mmc1: new SDHC card at address aaaa
[20787.874847] mmc1: card aaaa removed
[21102.784624] mmc1: new high speed SDHC card at address e624
[21119.691467] mmc1: card e624 removed
It seems I have all the necessary information, but I am not sure where to go from here. It's obvious my laptop is detecting the card being inserted and removed, but the card reader is never listed in /dev so I can't mount it. It's listed under lspci but not under lsusb. I'm assuming that it was two weeks ago and that's why it worked, but I'm not sure how to get lsusb to detect it so it will work again. Thanks for any help you guys have.
Last edited by coolcashews (2013-07-06 00:32:55)

Thanks for your quick reply. Here are the logs you asked for:
lsmod | grep mm
mmc_core 94486 2 sdhci,sdhci_pci
usb_common 954 1 usbcore
pacman -Qi linux
Name : linux
Version : 3.9.9-1
Description : The linux kernel and modules
Architecture : x86_64
URL : http://www.kernel.org/
Licenses : GPL2
Groups : base
Provides : kernel26=3.9.9
Depends On : coreutils linux-firmware kmod mkinitcpio>=0.7
Optional Deps : crda: to set the correct wireless channels of your country
Required By : None
Optional For : None
Conflicts With : kernel26
Replaces : kernel26
Installed Size : 65511.00 KiB
Packager : Tobias Powalowski <[email protected]>
Build Date : Wed Jul 3 16:00:01 2013
Install Date : Fri Jul 5 11:31:57 2013
Install Reason : Explicitly installed
Install Script : Yes
Validated By : Signature

SD card reader doesn't work on Satellite C850-1CN after Win 8.1 install

Hi,
Since I installed Windows 8.1 on my computer Satellite C850-1CN ref. : PSKCAE my SD port does not work
I would like to know if there is a driver I need to download because I searched the site for a pilot port but in vain ...
Sorry for my English I speak French and I hope I'm in the right forum

Hi
You have to download and install the card reader controller driver for Win 8.1 system
This driver should be the right one:
[Card Reader Controller v 6.1.8400.30136 Windows 8.1 - 64 Bit|http://www.toshiba.eu/innovation/download_driver_details.jsp?service=EU&selCategory =2&selFamily=2&selSeries=312&selProduct=7499&selSh ortMod=3417&language=13&selOS=all&selType=316&year upload=&monthupload=&dayupload=&useDate=null&mode= allMachines&search=&action=search&macId=&country=a ll&selectedLanguage=13&type=316&page=1&ID=88526&OS ID=46&driverLanguage=42]

Cannot use the card reader on my Equium A100

I've put my SD HC card into the reader, and ensured it's clicked in properly.
But nothing is happening. I recently reformatted my hard drive.
Can you please tell me which driver I need?
I've seen these on the toshiba downloads page and think they might be of help?
SD memory format, SD secure module, and also SD utilities.
I hope someone can help me, as I really need to get the info of this card!
Thanks.

Hi
I assume you use Win XP.
The Flash Media Driver from Texas Instruments is the driver for card reader controller.
Download it and install it!
PS: not all cards are supported and compatible so if an card will not work in the card reader then sometimes this doesnt mean that an card reader driver has not been installed
Anyway, in device manager the card reader should be recognized properly!

Still trying to get my memory card reader to work (H520)

Hello, all,
I see in Lenovo support that there are two card reader drivers updated for win 8.1. I wonder if that is why my card reader does not work.
How do I know what card reader is installed in my H520? I can't findit listed in device manager.

I restarted. That helped. But I deleted the DVD files a few restarts ago and it didn't do anything. Is there anything in the Disk Utility that I'm supposed to be doing? I downloaded the Omni Sweeper and that's doing its thing. Also the Omni Sweeper says my home folder is using 174GB which is just not possible since I only have 120GB

Re: Satellite A300-1EG - Card reader doesn't work

Hi. Here is my problem:
My OS is WinXPSP2, all necessary drivers was installed including for Card reader controller. But when I insert SD card into my laptop, nothing changes. In Device manager "Secure Digital Storage Device" marked with "!".
What is the reason of such problem? If somebody knows, help me please.
Thank you for attention.
P.S. I am sorry if something is wrong in my English.

Can you try to install the notebook with the recovery disk? This would be important because so can be sure that all functions will work.
If doesnt work it seems like a faulty hardware or lets say a faulty card reader but try the recovery disk first.

Satellite C850-B635 and Win7 - card reader is not working

My notebook came with windows 8 and the card reader was working
but I installed windows 7 64-bit , downloaded all required drivers to my notebook , but the card reader is not working now .
I downloaded a driver called card reader controller but it didn't work as well
I don't know if there is a problem or there is a driver that I should install and I don't know .
please help me solving that problem .
In my windows device manager these devices isn't recognized :
*PCI simple communications controller
*SM Bus Controller
*Unknown Device
I tried to search in my drivers download page in Toshiba website but couldn't find these
please help me making my card reader working again.
Regards
Message was edited by: domaking

To me the case is simple and the reason why the SD card reader does not work is that an compatible driver isnt installed.
My theory seems to be correct since the SM bus controller and PCI simple communications controller appear in the device manager and I guess one of these devices belongs to the SD card reader/controller.
I think you should simply install this Realtek Card Reader Controller which I found on the Toshiba EU driver page
http://support1.toshiba-tro.de/tedd-files2/0/carc-20130924161048.zip
Furthermore you should install all other Win 7 drivers as well as Toshiba tools available for Satellite C850 series.
Very important is the chipset driver, USB 3.0 driver (Win 7 needs this driver to control the USB 3.0 port), display driver. etc
Not very essential tools are Bulletin Board, Online Product information, Reeltime, etc such additional tools dont improved the notebook performance so its up to you if you want to use these software parts

Card Reader H8-1110

Hi, after installing W8.1 (i.e. upgrading from W7) on my HP H8-1110 Desktop computer, the Realtek Card Reader (controller) stopped working (was no longer available).
I would appreciate if you could please advise me where I can find a W8.1 Driver for the Realtek Multi (6 SD) Card Reader for my Hewett Packard H8-1110 Desktop computer?
Thank you for your help,
Lin

Hi swedishdiva
Try install Card reader driver for XP,Vista,Win7,Win8,Win8.1
Download - Realtek

MSI P67A-G45 (B3) - Problems with USB3 & Updates & card reader, etc.

Hi, I have the MSI P67A-G45 (B3) motherboard and I'm still having problems with it (as from day one).
1) I still seem to have some problems with stability with the USB. I updated the drivers for the Renesas USB to the latest (2.1.39.0) from the station-drivers website,
I was thinking of grabbing the firmware update as well. But I wasn't sure if I should. The page also shows firmware updates for uPD720200 & uPD720200a, and I'm not sure which one is in my motherboard. Should I update? If so, which one is in my MB, uPD720200 or uPD720200a?
2) I'm also having trouble updating the Intel ME Driver and the Intel INF Update (although I'm googled that the INF update doesn't really matter).
3) I can't seem to get the firewire port working with my WD Home 2TB external HDD (it works through USB though).
4) I have an old internal flash card (SDHC/MS/MMC/etc.) reader from another desktop that I wanted to add to my MSI one. Is it possible to do so? Where would I plug it in?
5) Is there anything else I need to update: software or firmware? I've generally updated the stuff listed in the Live Update (except for the stuff I never installed).
Thanks. Please answer any of the questions if you can.

Quote from: xmad on 13-June-13, 01:03:41
Update the firmware and re-test:
>>Firmware and BIOSes<<
Scroll to the bottom of the page at that link and flash the USB controller firmware.
Thanks, Renesas update seems to have taken. Let's hope it's more stable.
I have a Core i5-2500k Sandybridge processor. Is there a point to me updating the BIOS & Management Engine to the latest? The support page for my MB says don't bother unless I have an Ivybridge processor?
Quote from: XFM on 13-June-13, 05:56:07
What PC is the card reader from? Some of those card readers such as from Sony & Dell will only work in the respective brand PCs they came from and not any other. I have one I removed from a Sony and it will not work in my rig. If the card reader is a normal 3rd party model purchased from a store it should work but may require drivers from the manufacturer of it. As far as plugging in a card reader they go to an internal USB header on the MB.
The old desktop was from computer maker Cisnet.
I plugged the 5-hole (or rather 4 holes, since one is blank) plug into JUSB1, but it seems to keep connecting and disconnecting in Windows 7 x64. Windows made drives for all 4 card slots, but whenever I put a memory card in, it would just connect and disconnect and the memory card would never show up. Is it a driver problem?
It's a Foxconn internal card reader, except I can't seem to figure out which model it is despite googling (not indicated anywhere on the card reader).
Don't really want to cough up $15-$20 for a new card reader, so I'm hoping to get this one to work. Thanks.

USB memory card reader not working since latest security update

Hi, I have an iApp CR-e500 multi-format memory card reader; worked great prior to the latest security update. Now every time I plug it in I get the following errors in the console:
Oct 19 03:37:00 dachshund kernel[0]: USBF: 1496.818 AppleUSBEHCI[0x1b4d800]::Found a transaction past the completion deadline on bus 91, timing out!
Oct 19 03:37:00 dachshund kernel[0]: USBF: 1496.826 AppleUSBEHCI[0x1b4d800]::DoIOTransfer - error 0xe000404f queueing request
The reader works fine on my office Windows laptop and my USB pendrive still works on my Mac, so the USB ports appear to be functional; they just don't like this thing anymore.
Was there a USB driver change? If so is there anything I can do to sort this? I suppose I could just buy a new card reader if someone can confirm one that works with the latest security update of 10.4.11, that would be great.
Alternatively if Apple could please loosen up whatever they tightened in their USB drivers that would be nice as well...

Disregard. Looks like it's the memory card I'm trying to mount; not working on the Windows machine either.
Sorry!

USB Card Reader no longer works after Lion update.

My USB card reader/writers no loger work since I "upgraded" to Lion 10.7.4. All was well with Snow Leopard, but with no built-in SD card reader I must rely on USB readers. Anyone know how to fix this issue? Are there updates avaiable or coming soon to resolve this issue?

Hi MissMedia 83 and welcome to the forums!!
This has been a trend that a lot of AppleCare advisors have been seeing as call drivers. Essentially, many of the USB internet modems that are used widely require a 32bit kernel to operate. In Snow Leopard, although the system was in 64bit by defauly, people had the option of booting the computer into a 32bit mode to use the USB modems successfully.
With Lion, however, no such options exists. If your USB modem device is only compatible with a 32bit machine, then your only options are to either downgrade to Snow Leopard or find a different provider that supports 64bit.
Sorry to be the bearer of crappy news. My suggestion is to use something like a pocket wifi or personal hotspot, where you have a wifi network that is being created by a small device that connects to the cell network. Much much easier and your computer thinks it's just a regular wifi network.
This is what I think the issue is anyway. Could be wrong.
Any other suggestions?

TS2634 My friends sd card reader no longer shows the pictures after updating to ios 7, is there a fix?

My friend has an ipad, and after updating to ios 7.0.2 the sd card reader that came with it no longer shows the pictures... just squares where the pictures would be. Is there a way to fix this?

@ Settings>iCloud
1. Icloud account being used
2. I see the following switches
>mail
>contacts
>reminders
>safari
>notes
>keychain (not a toggle switch)
>photos (not a toggle switch)
>find my iPhone
3. Storage & Backup
delete account option

02 card reader controller update

Similar Messages

Maybe you are looking for