02 STO 's for a single process order

Hi All,
Can anyone explain me whether there any problem in getting two STO's for a single process order?
If its a problem how to generate only one STO for a one process order?

Hi Mallika,
can you explain your sceanrio . i am not able to understand your requirement.....
Regards,
Venkat.

Similar Messages

  • Single process order spanning over multiple days...

    Hi All -
    My scenario is as follows:
    I have a semi FG C going into multiple FGs A and B.
    Receipts for A and B create dependent requirements for C on different days of a week. It would always be 2 continous days, Monday-tues or Tue-Wed and so on.
    My lot size period type is "Days - 1." So when I run PPDS heuristic, the system creates 2 planned orders to cover the 2 different dependent requirements since my period bucket is days - 1.
    We would want only 1 planned order for semi FG C which spans over 2 days of the week. To achieve this, what I did is change the lot size period type to Week-1 ( with period factor 1) which would create a single process order on the last day of the week and have the scheduler move the order and align it with the receipt of the FIRST planned order( for A or B).
    Is there anyway we can let the system do this for us? Again the requirements can be on Day 1-2,2-3,3-4,4-5 etc...but what we would like is based on when the multiple requirements are, the system create the planned order for C on the day of the requirement of the first receipt( be it A or B).
    IF Dep Reqs are on day 2-3, the planned order for C is needed on day 2. If the dep reqs are on 4-5, the planned order for C should be on day 4.
    Any inputs will be appreciated.
    Also, is there any function in the DS planning board to "Merge" 2 orders?
    Varun

    Hi
    Changing to weekly lot size is the best option.  It seems your problem is that the process order should get over (end date) before the first requirement.  In such a case, you should also maintain a rounding value/fixed lot size in material C.  Then process order will be created before the order of A or B (The first of the two) starts.  In product view it will show a surplus on the first day and it will get consumed on the next day when B is produced.
    Another way is to avoid using period factor so that heuristic creates planned order before the requirement.
    Hope this should solve.
    Nitin

  • Multi Plnd Order to Single Process Order

    We have implemented Process Industry in our organisation (PP-PI).
    Can we convert MULTIPLE planned order to SINGLE process order ? How?
    If 'No' then what is the reason behind it?
    Chintan Patel

    Thank you Mr. Shiva & Mr. Vittal for prompt reply.
    But going furhter in the scenario as under:
    1) FERT, Strategy: 20 Make-to-Order
        Ind/Collective: 2 Collective Only,
        MRP Type: M0,
        Lot Size: MB,
        Procurement: Inhouse Production
       FERT has BOM which include HALB, VERP
       HALB has BOM which include ROH & VERP
    2) Sales Order Entered
        Line: 10  FERT: 600000673    Qty: 2000
        Line: 20  FERT: 600000673    Qty:      3  (free qty)
    3) Run MPS by MD50 on Sales Order, Line Item 10
        Result: Planned Order for line item 10 is generated
    4) Run MRP by MD41 on FERT 600000673
        Result: Second Planned for line item 20 is also generated
    Requirement:
    Can we obtain only one planned order for both line items as FERT are same for both lines ?
    Chintan Patel, Gujarat

  • Restriction of number of POs for a single Sales Order

    Hi,
    Currently, For a Single Sales Order multiple Purchase Orders are being created. Now, the Client wants to restrict number of Purchase Orders for a Single Sales Order that means, he wants only 1 Purchase Order for 1 Sales Order. Could you guys suggest how can I do this..? Is there any configuration for this ? Please suggest.
    A quick reply would be very helpful.
    Thanks in advance.

    Hi Pavan,
    In VA01 once you enter into the document and give the sold to party name below that you can see PO No there give only one PO no and and PO date based on the requested quantity the sale order will be created subsequent delivery and billing will happen.
    Regards
    Ram

  • Tolerance limit for Components in Process Order

    Dear Friends,
    As we can provide underdelivery / overdelivery tolerance for GR of process order, likewise is it possible to provide tolerance for BOM components in process order?
    The requirement is like that confirmation should be allowed with GI done within + / - 5 % of BOM qty in process order. Is it possible to cater this requirement with any exit / BAdi?
    Kindly help with your valuable inputs.
    Thanks in advance.
    Regards,
    Tejas

    Dear,
    Thanks for your prompt reply. Actually I have been already working on this exit only.But me & my technical fellow are stuck up for build logic for tolerance limit. It is working to restrict confirmation till GI has been done. But we are unable to give provision of tolerance limit for GI with this exit.
    Can you pls share more details about writing logic for it?
    Regards,
    Tejas

  • Create two outbond edi 850(simultaniesly)  for a single Purchase Order ,

    hi,
        I have to Create two outbond edi 850(simultaniesly)  for a single Purchase Order , How to go,
    Thanks in advance.

    Hi anikesh,
    just configure a second message [type] for the order.
    If the outbound IDoc is sent as the result of a message, why not have two of them?
    Regards,
    Clemens

  • How to find Missing Parts for a particular Process Order?

    Hi,
    How to find Missing Parts  for a particular Process Order ?
    Is there any function module or Table ??
    Thnx in Advance.

    Hi prince roy
    you can use the T-code = <b>CO24 - Missing Parts Info System</b>
    if helpful PLEASE REWARD YOUR POINTS
    thanks
    chakri

  • Report for conformation cancelled process orders.

    Hi frnds,
    I need a report for orders which have got cancelled of confirmation.
    plz suggest...
    Robert.

    Dear,
    There is no standard report in SAP which shows Report for conformation cancelled.
    But you can check in order it self in COR2 good movement details.
    Or  check document in MB03
    Use CORS to reverse the phases.
    After canceling if you want to view it again then use CORT (here there is one check box named 'Reversed' means that phase is reversed).
    Or Please use user exit
    EXIT_SAPLCORF_404 Process order conf.: Customer specific input checks 2
    Regards,
    R.Brahmankar

  • Table for transaction code for creation of process order

    Hi Gurus,
    Please tell me, in which table i can see the transaction code used to create process order.
    regards
    Kaisar

    Hi,
    Table for transactions is TSTC.
    If your looking for t-code for process order - COR1.
    Regards,
    Vivek

  • Special stock indicator for component in process order

    Hi,
    There is a field in process order where we can maintain special stock indicator for component.
    In this filed if we define consignment stock, then the vendor field becomes activated, where the vendor can be given.
    Now we want to maintain the data as a master data so that whenever process order is created the sp stock indicator as well as vendor are populated for that particular component.
    Q - where to define this master data. I could not see such fields in BOM?
    regards,
    Mohit

    Hi Sunderesan,
    Thaks for responding. Even by doing this system does not propose special stock indicator as '3' in process order & even vendor is not proposed.
    My requirement is that system should propose '3' in special stock indicator in process order.
    Request to look into this.
    regards,
    Mohit

  • BADI for COR1 transaction(Process orders)

    HI All,
    My requirement is to create a idoc  for the process order which is released from COR1.(idoc part is completed)
    Can any one suggest me a badi which will triger while releasing the process order from COR1 (not cor5),
    i worked with workorder_update and BEFORE_UPDATE but they are not satisfying my requirement bcoz when releasing a process order from COR1 the order number is not creating it is in the form of %00000001..so i need a badi which will get the process order after it is saved and has to triger the code which we written in that badi.

    Hi Suresh,
    My Application is also like that but instead there is COR5. Is it possible to pass me the codes you used using BADI. Eventhough its not satisfying ur requirement, I just want to see how ur doing it.
    Please.
    Thank you.

  • Problem in automatic batch determination for components in process order

    hi
    Ours is a process order industry. Here we prepare food items.
    We are entering manual batch for finished product. We want to perform automatic batch determination for one of the components raw material. For other packing material we do not want to maintain batches.
    The batch procedure picked is me0001 for 261 movement type instead of C00001.
    Because of that we need to enter batch manually.
    Send us the procedure to automatic batch determination for components.
    regards
    ravi

    Ravi,
    Before posting please do search in this forum because this topic has been discussed many times in past.
    Please check below links which could be helpful to you Automatic batch determination in process order
    http://www.sapsword.com/home/sap-batch-management/sap-batch-determination
    If you still have issues then please come back.
    Br
    KK

  • Prodcution Scheduling Profile for without material process order

    Hello Gurus,
    I am creating process order without material and assigning Production Scheduling Profile in assignment tab. Production Scheduling Profile  has release on creation activated in configure, but when I save process order its not released, it remains as CRTD.
    When I am creating process order with material as you know Production Scheduling Profile is copied from material master and when I save process order, its automatically released.
    I am assigning same Production Scheduling Profile which I am using for second case listed above.
    Any ideas?
    Thanks
    Bhavesh Patel

    Dear Patel,
    I Already told, once , you are in order  screen, system status will set as CRTD, after that if U assigned, the PSP, It won't work,  In case of COR1, material have PSP, If you convert planned order to production, release is triggered in background before the status is created.
    If you have still doubt
    Create a order in COR1, When you enter the quantity and start date finish date then release is carried out and the status is set as CRTD
    in CORO
    It is not possible to  maintain PSP before entering the qty and Dates
    Once U entered the dates, Sytem set the status as created, After you assigna PSP, It won't work
    Regards,
    Sundaresan
    Edited by: Sundaresan . E. V on Sep 14, 2010 7:01 PM

  • Sched.start date not allowing on week-ends for fwd scheduling process order

    Hello Experts,
    For a process order & scheduling typr forward/in time if I take sat or sunday as a start date then if I click on schedule, system changes it to previous workin day (friday). But however if i select backward/in time scheduling type & put week ends as finish day then system does not change this date.
    How can I make system to allow schedule start date on week ends also for forward/in time scheduling type. in a factory calendor sat & sunday are holidays. while for work center, calender sat & sunday are marked as working days.
    Thanks for advance,
    Vijay.

    Hi
    it depends upon client requirement.you must have defined the holiday calender as well.if you select the public holidays in your factory calender.then system will allow you to do your daily transctions on public holidays as well and vice versa.so better go with all options selected .and plz check at your end
    plz revert back if it works
    Regards
    Anupam Sharma

  • Batch Determination for material in Process Order

    Hello,
    I need to set up a Batch determination strategy for the Raw material at IM level for a Process Order.
    Basically the materials are Batch Managed and already have a Batch number assigned to it.
    I just want to use a simple strategy of determining material with the oldest GR datel(FIFO) during the Process Order creation/release or during the Process Order confirmation.
    Can you guide me how to set up the strategy and the conditions to do a FIFO for the materials during the Process order.
    Thanks in Advance
    SAP FANS....

    Hi,
    Only Problem with this FIFO strategy in which you want to do Batch Determination with reference to Oldest GR date is GR date itself.
    Batch determination will only possible if Batch Characteristic values are maintain.What I have observe for this GR date is if we use this as a Reference Characteristic in that case also Value is not set automatically in the Batch Data, so value of the GR date is maintain manually.Pls check it your end if no problem then The rest of the things for Batch determination are not difficult.
    Use below link for Batch determination,
    [Batch Management and Determination |Re: Browser Based PI sheet]
    Regards,
    Dhaval

Maybe you are looking for