020: The custom scan file is corrupted.
Hi
Can someone please tell me how to fix the error "020: The custom scan file
is corrupted." This is the error being thrown up when we do a custom scan.
We have already tried creating a new policy package but to no avail, the
output is still the same. Does anyone know of another solution other than
reinstalling zenworks 4?
Thank you.
Danny
Robin,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Do a search of our knowledgebase at http://support.novell.com/search/kb_index.jsp
- Check all of the other support tools and options available at
http://support.novell.com.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://support.novell.com/forums)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://support.novell.com/forums/faq_general.html
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/
Similar Messages
-
021: Unable to access the Custom Scan file.
6/24/05 12:10 PM,Scanner(Information) : 024: Initiated scan
successfully.;Scanner(Warning) : 021: Unable to access the Custom Scan
file.;Scanner(Information) : 002: Unable to register in to the DMI Service
Layer.;Scanner(Information) : 009: Software Scan done using Microsoft
Installer (MSI).;Scanner(Error) : 022: Unable to write to the .STR file.;Jlombard,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Do a search of our knowledgebase at http://support.novell.com/search/kb_index.jsp
- Check all of the other support tools and options available at
http://support.novell.com.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://support.novell.com/forums)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://support.novell.com/forums/faq_general.html
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/ -
I tried down loading mozilla firefox to use as a web browser. It was downloaded 100% then when prompted to "run" An error message comes up with a red cross and the message'This file is corrupted" and won't let me proceed. What do I do now?
It is possible that your anti-virus software is corrupting the downloaded files or otherwise interfering with downloading files by Firefox.<br />
You can try to disable the real-time (live) scanning of files in your anti-virus software temporarily to see if that makes downloading work.
See http://kb.mozillazine.org/Unable_to_save_or_download_files -
NSS6000 "Firmware Update Error: The firmware image file is corrupt."
Hello All,
I've recently run into a problem trying to update the firmware on our NSS6000 to either 1.20.1 or 1.21.0. We are currently running 1.16-3.
Each time after I click "Upgrade Firmware", the upgrade fails with the same error: "Firmware Update Error: The firmware image file is corrupt. Obtain another copy of the file and try the firmware upgrade again".
I've tried re-downloading the NSS6000_FW_1.20.1.tar.gz and NSS6000_FW_1.21.0.tar.gz several times from multiple PCs, and using multiple browsers. I've tried several combinations of Windows Server 2003R2, Windows Server 2008R2, Windows 7, and Firefox, Chrome, and IE 8/9.
The downloads all appear to be fine, and they all can open/extract with 7-zip without issue. The file sizes are always the same.
No combination of OS/Browser yields a different result on the upgrade attempt either.
I tried renaming NSS6000_FW_1.21.0.tar.gz to NSS6000_fwupgrade_0121.tar.gz to match the convention used in early versions (thinking that the extra "."'s could be the issue) but no luck either.
I was able to successfully re-apply the NSS6000_fwupgrade_0116.tar.gz firmware without any issues at all.
A strange thing I noticed, though, was on the "The system will reboot now. Please close your browser." window, it shows the device as an "NSS2000 2-Bay Gigabit Network Storage System" (please see attached screenshot). I'm chalking that up to a simple reusing-the-same-web-code issue rather than the root of the problem, but thought I should mention that as well.
Has anyone else run into this issue, or have any suggestions for workarounds in order to successfully upgrade the FW on this device? Thanks in advance for any suggestions.Hi,
Not sure what is going on i haven't see the issue you are having, can you try downloading both images at a different location; instead of behind your router. Also upgrade to .20 and then .21. Im pasting the release notes upgrades step.
When upgrading the firmware from v1.12 to v1.14, v1.12 to v1.20.1, or v1.12 to
v1.21.0 the Configuration GUI displays a "Programming images.." message
for more than 12 minutes (the time it takes to upgrade the firmware is
usually 5 to 10 minutes).
The workaround is to wait at least 15 minutes to complete the upgrade and
then power cycle the NSS by removing the power cord. Do not try and
access the Configuration GUI during this time. (CSCsx17923) When upgrading the firmware from v1.12 to v1.14, v1.12 to v1.20.1, or v1.12 to
v1.21.0 the Configuration GUI displays a "Programming images.." message
for more than 12 minutes (the time it takes to upgrade the firmware is
usually 5 to 10 minutes).
The workaround is to wait at least 15 minutes to complete the upgrade and
then power cycle the NSS by removing the power cord. Do not try and
access the Configuration GUI during this time. (CSCsx17923)
If this don't help you might have to give us a call @ 1-866-606-1866 and open a support case.
Thanks,
Jasbryan
Cisco Support Engineer -
Windows says the itunes download file is corrupt and will not install
Im trying to install itunes on my new windows 8 pc. It seems to recognize my software and takes me to a download the 64 bit file (iTunes64Setup.exe). Once the download completes, the file appears in my windows download manager with the message "The signature of this program is corrupt or invalid". If I right click and chose install anyway, I get a message saying that Windows prevented this from running.
I then found the 32bit download file (iTunesSetup.exe). I get the same results as above. Any ideas how to fix this?I get that all the time with all sorts of programmes. I normally shut down my pc, unplug it, wait for the light to go out on the back, plug back in reboot and it works (with most of my downloads) try this, it might fix it, it might not. I tried this the other day after it kept telling me it was corrupt, then it came down and installed fine. I do this now with every update of every program, if I forget they will all say they have an 'invalid signature' or 'corrupt from source file' etc. Hope this helps you. Also I have to do this before I download music as well, because otherwise it seems to come down with the stupid DRM still on the file, meaning I can't put it on my ipod, convert it or even play it on my system.
-
Error Encounterd while executing the Custom java file
Hi,
I have created a Custom Java file namely TestClient.java,if I try to run this file I get the following error:-
java.lang.NoSuchMethodError: oracle.xml.parser.v2.SAXParser.setContentHandler(Lorg/xml/sax/ContentHandler;)V at oracle.jdeveloper.cm.DefaultConnectionStore.read(DefaultConnectionStore.java:182) at oracle.jdeveloper.cm.ConnectionManager.loadConnectionDescriptors(ConnectionManager.java:1223) at oracle.jdeveloper.cm.ConnectionManager.getConnectionDescriptorImpl(ConnectionManager.java:1203) at oracle.jdeveloper.cm.ConnectionManager.putConnectionDescriptor(ConnectionManager.java:336) at oracle.jbo.client.Configuration.registerConnectionsFromDocument(Configuration.java:1029) at oracle.jbo.client.Configuration.loadFromStream(Configuration.java:262) at oracle.jbo.client.Configuration.loadFromClassPath(Configuration.java:350) at oracle.jbo.common.ampool.PoolMgr.createPool(PoolMgr.java:272) at oracle.jbo.common.ampool.PoolMgr.findPool(PoolMgr.java:473) at oracle.jbo.client.Configuration.createRootApplicationModule(Configuration.java:1286) at oracle.jbo.client.Configuration.createRootApplicationModule(Configuration.java:1264) at Package6Module.TestClient.main(TestClient.java:20)
Any Idea?Where am I going wrong ?The code that I have wriiten is as below :
package package6.Package6Module;
import oracle.jbo.*;
import oracle.jbo.domain.Number;
import oracle.jbo.client.Configuration;
public class TestClient
public TestClient()
public static void main(String[] args)
String _cf = "Package6ModuleLocal"; // Configuration Name
String _am = "package6.Package6Module.Package6Module"; // Application Module Name
// Create an instance of the appmodule by name, using Local mode
ApplicationModule am_Ord = Configuration.createRootApplicationModule(_am,_cf);
// Find the "CustomerView" view object by name in the app module
ViewObject vo_Dept = am_Ord.findViewObject("GecmRpScheduleLinesTestView");
System.out.println("AM_Module :"+am_Ord);
}BI Publisher
-
Where Are The Custom Preset Files Stored?
I deleted FCS 2 before installing FCS 3 and unfortunately all of my custom presets in Compressor were lost.
I have got Time Machine with the old Compressor but I don't know where the old preset files are stored.
Ideally I would like to copy them to the new version as re-writing them will be a pain, assuming I can still remember what they were!Ian,
Now aren't you glad you went to the trouble of setting up Time Machine? -
This is the 2nd time I've tried to download your browser to use, and when I click "run", it tells me the "file is corrupt", and I can't do the download or obtain it. Is there a CD of it, or another means that I can obtain this? I am in terrible need of it, as the "Tagged" site has directed me to use it to access their site, & Internet Explorer is messed up & I can't use it. I used to have your browser previously, & tried to get it again before now, as I like it better, but I can't if your online version of the download file is corrupt. Thank you in advance for helping me with this.
Nevermind. I just figured it out.
-
How to reduce the size of the pdf scanned file ?
Hi,
I have canon PIXMA MG2120. I am trying to scan the documents but the size is to big to attach to email. Any Idea how to reduce the size of the PDF file?Hello
For pdf size,you can compress the pdf size if you want to reduce the size of the pdf files.
Here is the code to do it:
using System.IO;
using System.Drawing.Printing;
using RasterEdge.Imaging;
using RasterEdge.Imaging.Codec.Compression;
using RasterEdge.Imaging.PDF;
DocumentCompression.infile(@"C:\1.pdf");
DocumentCompression.Outfile(@"C:\2.pdf");
DocumentEncoder = DocumentEncoder.Group3Encoding
RasterEdgeImaging Document = new RasterEdgeDocumentg();
Image. DocumentCompression(@"C:\1.pdf", "C:\2.pdf", DocumentEncoder DocumentEncoder.Group3Encoding); -
My computer is 2 months old and the windows sound files seem to be corrupted
I have a computer 3 months old and the window sound files are corrupted. When I move the slider in the volumn control I get a pinging, twanging sound. It started about 3/4 weeks ago.
I've made not changes, just one morning I turned on PC and that is what was happening.
Pavilion dv7-6b55dx
Windows 7Hi
You have a couple of options as I see it.
Please First check if the speaker icon on the unit is not muted.
Go to Device manager and uninstall the driver and restart and unit will install the driver automatically.
Try doing System restore to the date when the unit was working fine.
Try to update the driver from hp.com website.
Let us know how it goes!
*Although I am an HP employee, I am speaking for myself and not for HP.
*Did my response help with your issue? If so, please give me Kudos by clicking the "Kudos" button. Thanks!
Regards
Manjunath
Let us know how it goes!
"I work for HP."
****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
****Please mark Accept As Solution if it solves your problem****
Regards
Manjunath -
How to configure and save presets for custom scanning?
There are 5 presets in Acrobat XI for scanning files: "Autodetect...", "Black &White...", "Grayscale...", "Color Doc...", and "Color Image".
There is also an option to to do a "Custom Scan..." and "Configure Presets" (modify the 5 above).
However, I could not find any way to create my own custom presets.. is that not possible?
I was hoping to at least save my configuration(and/or possibly create a few different custom scan templates) in the Custom Scan for future scans but that was also not an option.
I would gladly use the 5 presets and configure them to how I want them but its unfortunate there are no output options there to automatically append a scan to an existing file or create multiple files from a continuous scan.
So... 1) Can you create custom presets for scanning? 2) Is there a way to configure output options in the existing scan presets? Thanks!Pavanmeet,
you have to set all activities in the workflow to "general task" as well, not only for WS12300111 itself (doubleclick on each symbol with the "triangle").
check the status of the sent leave request in transaction PTARQ (Display Documents). Here the "next agent" & the "pers. no" of the next agent is of interest.
logon with the user, that is saved in infotype 0105 of the above mentioned pers.no. there should be the approve request.
you can check the status of the workitems with SWI1 (i assume your system is prepared for workflows , check SWU3)
Message was edited by: Achim Hauck -
After downloading a number of 1.0 MB files, the system became very sluggish, and I started to get lots of (Not Responding) messages when trying to download or just use Firefox for browsing. Using Performance Monitor, I observed that the Firefox executable was growing larger and larger - up to as large as 1.2 GB on a system with 2.0 GB memory. Page faults were off the chart.
Looking for a similar problem, I found one that discussed the downloads.sqlite file becoming corrupted. I first noticed that this file was over 600 MB in size, so I deleted it. I then downloaded additional files, and observed that the new downloads.sqlite file would increase in size by about 150% of the size of each file that was downloaded. Once it would get up to 500 MB in size, the system started slowing down again.
I don't know the purpose of this file, but it appears that it keeps a full copy of every file downloaded, which may be the function of a download history file, but it does not seem correct that the file should grow in size without limit, and thus impact the system.
I would also appear that the Firefox executable is trying to read the entire contents of this file each time a new file is downloaded, which does not seem right.
Temporary fix is to periodically delete the downloads.sqlite file when it gets too large and starts impacting performance.. Apparently it is smart enough to open a new file if the old one is not found. I am not sure what the correct behavior for this file should be. Apparently is does not re-initialize when a new Firefox session is initiated.
Please feel free to contact me if more information is desired. I'm not sure what details you might need to troubleshoot this type of problem.Hi Katy, and a warm welcome to the forums!
What is the exact name of the file?
Is it aim.bin?
Which requires either Stuffit Expander, or the Unarchiver to deflate.
http://www.apple.com/downloads/macosx/systemdiskutilities/theunarchiver.html -
Right, so I have a windowsform with lots of Textboxes, where the user can type in Information, and then hit "Save", once its saved it goes into a sortof XML Format
<?xml version="1.0" encoding="utf-8"?>
<!--Database-->
<Case>
<Person>l<Driver></Driver><License-Holder></License-Holder><Address></Address><Phone></Phone><Date-of-Birth></Date-of-Birth><Registration></Registration>
Like that.
Now, on my Startup Form (The main form) there is a Listview that I gave the name Objectlist1. This list displays ANY file located in a specific folder on my computer. This is also where the Saved files appear.
The list also updates every 5th second so after you save it appears quickly.
Now, the Files are saved using the content or Value of the first Textbox:
Dim XmlWrt As XmlWriter = XmlWriter.Create("C:\Users\USER\Desktop\TESTFOLDER\" + Firsttextbox.Text, settings)
So it appears in the folder and on the list with the value inserted in the first Textbox.
My problem comes when I want to load this back (Or reverse the function if you will)
Where I can go to the Objectlist1/Listview, either doubleclick a file or Mark a file, and hit my button "Retrieve"
I want the Form where you could input all the values to show - which it does
And the information from the XML/File saved to appear where it once was typed or inserted.
Here is an example of the code used to save the values from the Textboxes;
Private Sub Savebutton_Click(sender As Object, e As EventArgs) Handles Savebutton.Click
If IO.File.Exists(Pholderbox.Text) = False Then
Dim settings As New XmlWriterSettings()
settings.Indent = True
Dim XmlWrt As XmlWriter = XmlWriter.Create("C:\Users\USER\Desktop\TESTFOLDER\" + Pholderbox.Text, settings)
With XmlWrt
' Write the Xml declaration.
.WriteStartDocument()
' CLIENT
' Write a comment.
.WriteComment("Database")
' Write the root element.
.WriteStartElement("Case")
' Start our first person.
.WriteStartElement("Person")
.WriteString(Textbox1.Text)
' The person nodes.
.WriteStartElement("Driver")
.WriteString(Textbox2.Text)
.WriteEndElement()
I've tried multiple codesamples but they all give either "XML Not found" or such Overloads.
This is the current code I used when trying to make it work
Private Function ReadSettingsXML(ByVal path As String) As MySettings # On Debug It marks here and tells me it wasn't found.
Dim thisSettingsInfo As New MySettings
If My.Computer.FileSystem.FileExists(Objectlist1.SelectedItems.ToString) Then
Dim settingsInfo = XElement.Load(Objectlist1.SelectedItems.ToString)
If settingsInfo IsNot Nothing Then
For Each mainGroup As XElement In settingsInfo.Elements
If mainGroup.Name = "<Database>" AndAlso mainGroup.HasElements Then
For Each subGroup As XElement In mainGroup.Elements
If subGroup.Name = "<Person>" Then
thisSettingsInfo.Textbox1 = subGroup.Value
ElseIf subGroup.Name = "<Driver>" Then
thisSettingsInfo.Textbox2 = subGroup.Value
ElseIf subGroup.Name = "<Address>" Then
thisSettingsInfo.Textbox3 = subGroup.Value
End If
Next
End If
Next
Else
thisSettingsInfo = Nothing
Throw New Exception("The settings XML file is corrupt and cannot be read.")
End If
Else
thisSettingsInfo = Nothing
Throw New Exception("The settings XML file could not be located.")
End If
Return thisSettingsInfo
End Function
Private Sub LoadXML_Click(sender As Object, e As EventArgs) Handles LoadXML.Click
Dim settings As New MySettings
settings = ReadSettingsXML(Objectlist1.SelectedItems.ToString)
If settings IsNot Nothing Then
Dim sb As New System.Text.StringBuilder
With settings
Caseworker.Textbox1.Text = .Person
Caseworker.Textbox2.Text = .Driver
Caseworker.Textbox3.Text = .Address
End With
End If
End Sub
Also, the "Caseworker" is the form where all the textboxes are located.
Been stuck on this for two working days, so any help is highly appreciated
Codesamples are also highly welcome so I can see what the heck you did and find and answer to my problems.I found a code that might be close to what I'm looking, but as of this code used here, it looks for a static document that already exist and is located in the code.
See this one here, checks for the XML file, and since I can't link one program to 1 file, when its gonna have and use 100's of files.
If (IO.File.Exists("MyXML.xml")) Then
Same here with the static document.
Dim document As XmlReader = New XmlTextReader("MyXML.xml")
While (document.Read())
Dim type = document.NodeType
'if node type was element
If (type = XmlNodeType.Element) Then
If (document.Name = "FirstName") Then
TextBox1.Text = document.ReadInnerXml.ToString()
End If
If (document.Name = "LastName") Then
TextBox2.Text = document.ReadInnerXml.ToString()
End If
End If
End While
Am I at least close here, people?
Can anyone help with the now critical issue I got?
I basically need to change these two;
If (IO.File.Exists("MyXML.xml")) Then
Same here with the static document.
Dim document As XmlReader = New XmlTextReader("MyXML.xml")
To whatever value, so they read from the file SELECTED in my Listview
Cos the program saves files according to the info inserted in textboxes, so it can have whatever name you can think of, I need the program to "find and load" that file, once its selected, and then once I hit Retrieve or LOAD or whatever button, it
injects the info from the File to the correct Textboxes.
And I think this will work to get the info in the right boxes;
If (document.Name = "FirstName") Then
TextBox1.Text = document.ReadInnerXml.ToString()
End If
If (document.Name = "LastName") Then
TextBox2.Text = document.ReadInnerXml.ToString()
Any good advise? I'm stranded here. -
'Save Scanned File As' dialog box causing problems
A lot of our users just upgraded to Adobe Std 8 from Adobe Std 7. With Adobe Std 8, the 'Save Scanned File As' dialog box comes up even before the document gets scanned (this was not the case with Adobe Std 7). How do you get rid of the dialog box? This is causing us a lot of problems because our Adobe is integrated with a document management program called DM5. With Adobe Standard 8 our users cannot save directly to DM5.Because the
#Save Scanned File As# dialog box comes up first, now they have to tell Adobe to save it first somewhere other than DM, after the document
gets scanned they save the document again to DM then they go back and delete the document that they saved in the other location. Is there a registry setting or anything that I can set to get rid of the 'Save Scanned File As' box. If you hit CANCEL, the document does not get scanned so users really do not have a choice but to save the document twice. As I said earlier, this was not the case with Adobe Std 7.Is there a registry setting or anything that I can set to get rid of the 'Save Scanned File As' box.
No. -
Troubleshooting Custom WSDL files and duplication
I am attempting to provide a web service for my company's CRM with Siebel, requiring multiple types(Specifically: Lead, Campaign, Contact, Activity).
However, when I import the custom WSDL files for these into my C# project, there are roughly alot of build errors due to the duplication of partial classes(and the fields therein)
Is there anyway around this besides manually going through the duplicates and removing them?Thanks for the response.
I have it working now.
I used wsdl.exe to create .cs files and imported those.
Each .cs file has its own namespace(I just used the class name again).
So instead of calling Campaign.CampaignInsert(CampaignWS_CampaignInsert_Input), its Campaign.Campaign.CampaignInsert(Campaign.CampaignWS_CampaignInsert_Input)
and so on for the other classes/methods.
Maybe you are looking for
-
How to show application "DavMail" in dock?
How to show application"DavMail" in dock?
-
CS3 Component Creation With Preset
I have created a CS3 component with around 10 inspectable parameters. Now I would like to add another Inspectable parameter with enumeration such that it contains a list of presets for the rest of the 10 parameters. When i select any one preset from
-
Switching images used as a symbol late in development
Does anyone know a way to switch the image you are using as a symbol later in the development stage? Lets say you edit an image in Fireworks, then convert it to a symbol, then copy and paste it into Flash and use it throughout the movie. Is there a w
-
Which is the best way to record full hd on digital betacam tape?
Hello, I'm capturing and editing full hd size but the final product has to be delivered on a digital betacam tape with Edit to Tape option to record. I have tried doing so with the following 2 ways: 1. Recording from HD timeline on a HD tape. Then ca
-
HT4314 I can't set up a game center account
when it asks for my DOB i put "1982" as my year and it says "invalid characters" in that field. Any ideas?