03.12.12 i cannot access my MobileMe server.

Today 03.12.12 i cannot access my MobileMe server. I have it as a legacy from last year but have not received any notification that it would be switched off today. I need access to my data - How & who do I need to contact at Apple to help me resolve this?
My iCloud accout is working fine.

appleforsbach wrote:
I knew it was coming but the comfort of it still working (yesterday all was good) meant I kept taking advantage of it!
You can't have been accessing the server - it's been closed since 1 August (and you will not be able to recover any data from it).
Were you using 'iDisk Syncing'? This is where you have a 'local copy' on your Desktop which in the past would have synced with the server, but obviously has not been doing so. However you would still be able to place data in it, but it has presumably now decided to disappear.
The 'local copy' is sourced from a 'sparsebundle' disk image which lives in (user)/Library/FileSync (and then in a sub-folder) so you may be able to locate that and open it to retrieve your data. However some people have reported difficulty in doing this, suggesting the file had become corrupted. You can only try. I really wouldn't bother contacting Apple: they won't be able to retrieve any of your data.

Similar Messages

I cannot access my mobileme on my imac it tells me that my browser safari and mozila can't open the page. However on my macbook it all works (in the same room)

i cannot access my mobileme on my imac it tells me that my browser safari and mozila can't open the page. However on my macbook it all works (in the same room. I have rebooted and rebooted. I have enough memory. Any help?

Hi Hawaiian_Starman,
Thank you for the suggestion.
I ran the first aid in the Keychain both for verification and for repair and both immediately returned with "no problems found".
As for the certificate, according the web administrator nothing had changed for the certificates.
even on the windows laptop I also get the certificate as being expired, but by simply accepting that I still have access.
I had a pop up every time that alerted me to the certificate issue, but whether I "continued" or not that still did not matter.
Yesterday, in an effort to find a solution, I went into the "details" and entered to trust this website.
Now that certificate issue does not pop up anymore. But I do not know how to reverse that either.
I have the feeling indeed it has something to do with a certificate, but how is the question.

I cannot access my mobileme's account from my Ipad 2

I cannot access my mobileme's account from my Ipad 2 because it assumes I do not have an account and need to create a new one (I can access my mobileme's account from my MacBook Pro). What can I do?

What are you trying to look up on your mobile me account? You should be syncing mobile me e mails, contacts, ect. You have to set them up.

Server 2012 R2 SMB - The process cannot access the file '\\server\share\test.txt' because it is being used by another process.

Hi,
We are having issues with Server 2012 R2 SMB shares.
We try to write some changes to a file, but we first create a temporary backup in case the write fails. After the backup is created we write the changes to the file and then we get an error:
The process cannot access the file '\\server\share\test.txt' because it is being used by another process.
It looks like the backup process keeps the original file in use.
The problem doesn't always occur the first time, but almost everytime after 2 or 3 changes. I have provided some code below to reproduce the problem, you can run this in a loop to reproduce.
The problem is that once the error arises, the file remains 'in use' for a while, so you cannot retry but have to wait at least several minutes.
I've already used Process Explorer to analyze, but there are no open file handles.
To reproduce the problem: create two Server 2012 R2 machines and run the below code from one server accessing an SMB share on the other server.
Below is the code I use for testing, if you reproduce the scenario, I'm sure you get the same error.
We are not looking for an alternative way to solve this, but wonder if this is a bug that needs to be reported?
Anybody seen this behavior before or know what's causing it?
The code:
string file =
@"\\server\share\test.txt";
if (File.Exists(file))
File.Copy(file, file +
".bak", true);
File.WriteAllText(file,
"Testje",
Encoding.UTF8);
The error:
System.IO.IOException: The process cannot access the file '\\server\share\test.txt' because it is being used by another process.

Hi,
There is someone else having the same issue with yours. You could try code in the article below:
“The process cannot access the file because it is being used by another process”
http://blogs.msdn.com/b/shawncao/archive/2010/06/04/the-process-cannot-access-the-file-because-it-is-being-used-by-another-process.aspx
If you wonder the root cause of the issue, the .NET Framework Class Libraries forum can help.
Best Regards,
Mandy
If you have any feedback on our support, please click
here .
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Error: "Cannot access the web server" with BlazeDS Turnkey

Help! I'm new to Flex and BlazeDS and Eclipse. I was trying to setup a Flex Project using a BlazeDS/Tomcat server running from Eclipse on Windows XP per the example in flexbandit.com/archives/55#comment-269 and in (www.infoq.com/articles/blazeds-intro).   I am NOT using the Eclipse Flex plug-in. I'm using Flex Builder for the Flex code.
Here's what I've done:
I installed BlazeDS and tested http://localhost:8400 - That worked.
I setup Tomcat in Eclipse. - That seemed to work.
I created a Dynamic Web Project in Eclipse - That seemed to work.
I created the bare-bones BlazeDS Configuration under the Eclipse project and then created a basic HelloWorld java class.
I added the destination in the “remoting-config.xml” file found in the c:/projects/workspace/ReportGenTool/WebContent/WEB-INF/flex” directory:
<destination id="HelloWorld">   <properties> <source>HelloWorld</source> </properties> </destination>
When I started the application server by clicking on the server's green play button in Eclipse and then tried to open localhost:8400/ReportGenTool, I got the 404 error : The requested source (/ReportGenTool/) is not available which according to the instructions is fine.
Next I created a Flex Project, but when I try to validate the new Flex project configuration, it gives me an error "Cannot access the web server. The server may not be running, or the web root folder or root URL may be invalid."
When I validated the server was running after setting up the BlazeDs Turnkey, I saw the BlazeDS page.
Now when I bring up http://localhost:8400 I get:
      Directory Listing for /
      Apache Tomcat/6.0.14
My eclipse project is named ReportGenTool and I've overwritten the WebContent directory with the META-INF and WEB-INF directories from the BlazeDS installation (C:\blazeds\tomcat\webapps\blazeds). According to Eclipse the server is running.
My Flex project is named ReportGenTool and is located in another directory away from the Eclipse project directory.
     My root folder is: C:\Projects\workspace\ReportGenTool\WebContent
     Root URL: is http://localhost:8400/ReportGenTool/
     Context root is: /ReportGenTool/
Any idea what might be wrong? What didn't I configure that needs to be configured?
Thanks in advance.

This is not working because your router has a direct to your web server that is not through the outside interface which is needed for nat to occur, for this to work you need to setup a loopback interface as nat outside and policy route traffic to there for your server traffic
Bu if your server is internal why do you need nat at all? Can you not use bind with views that might be simpler
M
Sent from Cisco Technical Support iPad App

Windows 7 pro client cannot access folders on server 2003 domain server

I added a windows 7 64 bit client to a server 2003 32 bit domain 3 weeks ago and file sharing was working fine until today, 5/4/12. Now, when trying to access shared folders that reside on the server,
I get the following "access denied" message:
[…folder…] is not accessible. You might not have permission to use this network resource. Contact the administrator of this server to find out if you have access permissions.
The user name could not be found.
Strangely enough...
The windows 7 client
can open shared folders that reside on the XP clients in the domain
All the XP clients in the domain can access the server 2003 folders
All the XP clients and the server 2003 machine can access shared folders and printers on the windows 7 client.
The windows 7 client can ping the server 2003 machine and vice versa
I can “see” the server in my network list, but when I click on it, I get the same “access denied” message listed above.
So... the only problem is that the windows 7 client cannot access folders that reside on the windows server 2003 machine. There must be some sharing setting that got changed
by a recent windows update.
Here is what I have done/verified so far on the windows 7 client:
In advanced sharing settings for Home/Work, Public and Domain profiles:
network discovery is enabled
file and print sharing is enabled
use user accounts and passwords to connect to other computers is selected (I also tried allowing windows to manage homegroup connections instead, but the problem remained.)
40 -56 bit encryption is enabled
In “gpedit.msc” Local Policies/Security Settings:
enabled the following policies:
Network access: Allow anonymous SID/name translation
Network access: Let Everyone permissions apply to anonymous users
disabled the following policies:
Network access: Restrict anonymous access to Named Pipes and Shares
Network access: Do not allow anonymous enumeration of SAM accounts
Network access: Do not allow anonymous enumeration of SAM accounts and shares
What am I missing? Are there policies on the server that need to be adjusted?
Please help! My business is crippled if I cannot access server files from this workstation. Thank you in advance.

As this thread has been quiet for a while, we assume that the issue has been resolved. At this time, we will mark it as ‘Answered’ as the previous
steps should be helpful for many similar scenarios.  <o:p></o:p>
If the issue still persists and you want to return to this question, please reply this post directly so we will be notified to follow it up. You
can also choose to unmark the answer as you wish.  <o:p></o:p>
In addition, we’d love to hear your feedback about the solution. By sharing your experience you can help other community members facing similar
problems.  <o:p></o:p>
Thanks!<o:p></o:p>
Arnav Sharma | http://arnavsharma.net/ Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading
the thread.

Mail cannot access the mail server, but other email clients do.

My web host recently had extended problems with the mail server my sites are on. Now, Mail on my iMac Intel 27 Duo says it cannot access the server. However, Thunderbird and Entourage Mac have no problem. Sending from Mac Mail seems to be Ok as well. I've checked the settings over and over. I received no system disk for this machine when I bought it. Do I need to reinstall Mail, and if so, how?
The info below from Connection Doctor shows it appears to be trying to access through Port 25 but I have Mail set for 587 as instructed by the hosting company. I have renamed private info in the text below.
READ Jan 16 09:56:42.941 [kCFStreamSocketSecurityLevelNone] -- host:mail.myemail.com -- port:25 -- socket:0x11f51aed0 -- thread:0x122c48a20
250-servername-a41.g.webhostname.com
250-PIPELINING
250-SIZE 40960000
250-ETRN
250-STARTTLS
250-AUTH PLAIN LOGIN
250-AUTH=PLAIN LOGIN
250-ENHANCEDSTATUSCODES
250 8BITMIME

However, Thunderbird and Entourage Mac have no problem. Sending from Mac Mail seems to be Ok as well. I've checked the settings over and over.
Well if TB and Entourage can both send and receive but Mail can only send I can only conclude you missed something in you rechecking. Of course with you being the only one checking you are going to make the same "mistake" and never no it. So post the relevant POP server info for your ISP (edit out personal info and passwords of course):
Account Info:
Incoming Mail server: pop server address
User Name:             required user name POP server is looking for (censor)
Password:              password required by POP server (censor)
Advanced:
Port:      995, 25, default?
Use SSL:   yes or no
Auth:      kind of authentication

Cannot access internal web server from same lan

i cant resolve one problem in may 1921 ISR router, i have a web server in my internal lan , i set up static nat for accessing that web server from outside and it works fine but i cannot view that site from internal workstations can you suggest me what to do. i need packets to go out the outgoing interface of router and then come back and enter the static nat wich will direct to the web server is it possible?
static nat is
ip nat inside source static tcp <local web server adress> 80 <global address> 80
also i have set up dinamic nat for outgoing trafic
ip nat inside source list <access-list> interface <outgoing interface>
and it is working fine too.
on external interface i have nat outside
on internal interface i have nat inside

This is not working because your router has a direct to your web server that is not through the outside interface which is needed for nat to occur, for this to work you need to setup a loopback interface as nat outside and policy route traffic to there for your server traffic
Bu if your server is internal why do you need nat at all? Can you not use bind with views that might be simpler
M
Sent from Cisco Technical Support iPad App

Cannot access one specific server

Hi!
I'm using an eMac G4 to manage my website, very simple (Wordpress + images). I had no problems until last week, when my hosting company turned out some FTPs to prevent massive usage of other users. I tried to upload some files to my FTP and tried to send some emails with an associated account to that site but I couldn't. When my hosting company solved the problem I could access the FTP and download my email, but I could not upload anything nor send emails with attachments.
I thought it was my Internet connection, but it wasn't as I could upload files with a PC connected to the same DSL. I can use it with no problems with any other computer but my eMac. Besides, it's the only FTP I'm having trouble too.
I flushed my DNS and no changes. I introduced manually my DNS and no changes. I renewed my IP as I have dynamic IP and no changes. I checked if I got a firewall and no firewall. My hosting company doesn't know what to tell me and I don't know what to do.
Any clue on what might be happening?

Hi again!
The problem remains. I upgraded to Tiger and I cannot upload files to ONLY ONE specific server. As the hosting company told me my IP address is not blocked from the server (and I have dynamic IP, so it doesn't matter), I pressume it is some kind of problem of my Network configuration. However, I don't know what to do.
Could it be my OSX be blocking uploading information to one specific server? Is there any "black list" or something at any plist?
It's really, really frustrating. Any ideas?

Cannot access web integration server admin page

Hi guys,
1)After Installing 9iAS and setting up all the configurations needed to run the sample test page .jsp file from the web integration server i get the following error....YOU ARE NOT AUTHORIZED TO VIEW THIS PAGE.
2)What value to set for HTTP & HTTPS proxy under the URL-http://host_name.domain:5555 ?
3)I tried to change the port number of the HTTP LISTENER from inside the http://host_name.domain:5555 pressed OK.Now how to find the port number of he web integration server(previously it was http://host_name.domain:5555 but now the port number is changed without which i cannot login to the admin page of that server.)
Gimme a solution to these probs
Thanx in advance,

I am trying to access our Production Enterprise Manager for the 10g AS.
When I try to access it I am getting an error:
An error has occurred!
IOException in sending Request :: Connection refused: connect
So from the command line I check:
emctl status iasconsole and it says that
EM Daemon is not running.
So then I type: emctl start iasconsole and it says:
An instance of Oracle 10g Application Server control is already running
Do you wish to shut down first?
If I say no, the startup is aborted. If I say yes then:
The OracleOracle10gASProdASControl service is not started?
What the heck does that mean? The status shows the Daemon is not started, but when I try to start it, it says it is already running? Can anyone help?
Thank you,
Jeff

Cannot access weblogic admin server console

All,
I am not able to access https://<myhostname>:7001/console URL after sucessfull installation of web logic server on linux. During installation I also created base_domain.
Here is the log during the AdminServer startup :-
<Oct 4, 2009 9:02:02 AM PDT> <Notice> <Log Management> <BEA-170027> <The Server has established connection with the Domain level Diagnostic Service successfully.>
<Oct 4, 2009 9:02:02 AM PDT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to ADMIN>
<Oct 4, 2009 9:02:02 AM PDT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RESUMING>
<Oct 4, 2009 9:02:03 AM PDT> <Notice> <Server> <BEA-002613> <Channel "Default[1]" is now listening on fe80:0:0:0:20c:29ff:fe28:8f5b:7001 for protocols iiop, t3, ldap, snmp, http.>
<Oct 4, 2009 9:02:03 AM PDT> <Notice> <Server> <BEA-002613> <Channel "Default" is now listening on 192.168.119.129:7001 for protocols iiop, t3, ldap, snmp, http.>
<Oct 4, 2009 9:02:03 AM PDT> <Notice> <Server> <BEA-002613> <Channel "Default[3]" is now listening on 127.0.0.1:7001 for protocols iiop, t3, ldap, snmp, http.>
<Oct 4, 2009 9:02:03 AM PDT> <Notice> <Server> <BEA-002613> <Channel "Default[2]" is now listening on 0:0:0:0:0:0:0:1:7001 for protocols iiop, t3, ldap, snmp, http.>
<Oct 4, 2009 9:02:03 AM PDT> <Notice> <WebLogicServer> <BEA-000329> <Started WebLogic Admin Server "AdminServer" for domain "base_domain" running in Production Mode>
<Oct 4, 2009 9:02:03 AM PDT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RUNNING>
<Oct 4, 2009 9:02:03 AM PDT> <Notice> <WebLogicServer> <BEA-000360> <Server started in RUNNING mode>
From the above it looks like there was no issue in starting up the admin server. But when I try to access the weblogic admin server url, it does not show up.
Can you please help me to resolve the issue if any so that I can access the admin console?
THanks,
Amit

hey, same here...
this is what i get when starting up the console
<May 4, 2010 12:52:51 PM WIT> <Notice> <Log Management> <BEA-170027> <The Server has established connection with the Domain level Diagnostic Service successfully.>
<May 4, 2010 12:52:51 PM WIT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to ADMIN>
<May 4, 2010 12:52:51 PM WIT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RESUMING>
<May 4, 2010 12:52:51 PM WIT> <Notice> <Server> <BEA-002613> <Channel "Default" is now listening on xxx.xxx.xxx.xxx:7777 for protocols iiop, t3, ldap, snmp, http.>
<May 4, 2010 12:52:51 PM WIT> <Notice> <Server> <BEA-002613> <Channel "Default[1]" is now listening on 127.0.0.1:7777 for protocols iiop, t3, ldap, snmp, http.>
<May 4, 2010 12:52:51 PM WIT> <Notice> <WebLogicServer> <BEA-000329> <Started WebLogic Admin Server "AdminServer" for domain "xxxxxDomain" running in Production Mode>
<May 4, 2010 12:52:51 PM WIT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RUNNING>
<May 4, 2010 12:52:51 PM WIT> <Notice> <WebLogicServer> <BEA-000360> <Server started in RUNNING mode>
but when i go to the browser
http://xx.xx.xx.xx:7777/console..
Error 404--Not Found
From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:
xx.xx.xx 404 Not Found
The server has not found anything matching the Request-URI. No indication is given of whether the condition is temporary or permanent.
If the server does not wish to make this information available to the client, the status code 403 (Forbidden) can be used instead. The 410 (Gone) status code SHOULD be used if the server knows, through some internally configurable mechanism, that an old resource is permanently unavailable and has no forwarding address.
i still try to fix this..

Cannot Access OpenLDAP Directory Server for Windows

Hi All,
Need urgent help for connecting to LDAP server which I installed on my Win 2000 Professional m/c. The LDAP installation was downloaded from the site www.ilex.fr/openldap. I successfully installed it. In the slapd.conf file, I have set the server suffice as dc=mycompany,dc=com and the rootdn is cn=Manager,dc-mycompany,dc=com. I have the following piece of code which tries to list the Java schema in the LDAP directory. The code was downloaded from sun's JNDI tutorial. The name of the Program is
CreateJavaSchema and it is run by giving the following options:
-l     List the Java schema in the directory
-n<dn>      Use <dn> as the distinguished name for authentication
-p<passwd>     Use <passwd> as the password for authentication
-a<auth>     Use <auth> as the authentication mechanism. Default is "simple".
I tried to run the program as java CreateJavaSchema -ncn=Manager,dc=mycompany,dc=com -psecret99
where secret99 is the root password . However I get the following exception
javax.naming.CommunicationException: localhost:389. Root exception is java.net.ConnectException: Connection refused: connect
Can somone help me with this?
Thanks

The Code ..yes
Here it is: .This code is availbale from JNDI tutorial. I run the program by specifying following command-line arguments.
java ListJavaSchema -ncn=Manager,dc=mycompany,dc=com -psecret99.
However I get the exception "javax.naming.CommunicationException: localhost:389. Root exception is java.net.ConnectException: Connection refused: connect"
import javax.naming.*;
import javax.naming.directory.*;
import java.util.Hashtable;
public class ListJavaSchema {
protected static String dn, passwd, auth;
protected static boolean netscapebug;
// NS 4.1 has problems parsing an object class definition which contains
// a MUST clause without parentheses. The workaround is to add a
// superfluous value (objectClass) to each MUST clause.
// It also doesn't like the Octet String syntax (use Binary instead)
protected static boolean netscape41bug = false;
// AD supports auxiliary classes in a peculiar way.
protected static boolean activeDirectorySchemaBug = false;
protected static boolean traceLdap = false;
protected static final int LIST = 0;
protected static final int UPDATE = 1;
private static String[] allAttrs = {
     "javaSerializedObject",
     "javaFactoryLocation",
     "javaReferenceAddress",
     "javaFactory",
     "javaClassName",
     "javaClassNames",
     "javaDoc",
     "javaSerializedData",
     "javaCodebase",
     "javaFactory",
     "javaReferenceAddress"};
private static String[] allOCs = {
     "javaObject",
     "javaNamingReference",
     "javaSerializedObject",
     "javaRemoteObject",
     "javaMarshalledObject",
     "javaContainer"};
public static void main(String[] args) {
     new ListJavaSchema().run(args, allAttrs, allOCs);
ListJavaSchema() {
protected void run(String[] args, String[] attrIDs, String[] ocIDs) {
     int cmd = processCommandLine(args);
     try {
     DirContext ctx = signOn();
     System.out.println("Context: "+ctx);
     switch (cmd) {
     case UPDATE:
//          updateSchema(ctx, attrIDs, ocIDs);
          break;
     default:
          showSchema(ctx, attrIDs, ocIDs);
     } catch (NamingException e) {
     e.printStackTrace();
* Signs on to directory server using parameters supplied to program.
* @return The initial context to the server.
private DirContext signOn() throws NamingException {
     if (dn != null && auth == null) {
     auth = "simple";      // use simple for Netscape
     Hashtable env = new Hashtable();
     env.put(Context.INITIAL_CONTEXT_FACTORY,
     "com.sun.jndi.ldap.LdapCtxFactory");
     env.put(Context.REFERRAL, "follow");
     if (auth != null) {
     env.put(Context.SECURITY_AUTHENTICATION, auth);
     env.put(Context.SECURITY_PRINCIPAL, dn);
     env.put(Context.SECURITY_CREDENTIALS, passwd);
     // Workaround for Netscape schema bugs
     if (netscapebug) {
     env.put("com.sun.naming.netscape.schemaBugs", "true");
     // LDAP protocol tracing
     if (traceLdap) {
     env.put("com.sun.jndi.ldap.trace.ber", System.err);
System.out.println("HashMap: "+env);
     return new InitialDirContext(env);
void showSchema(DirContext ctx, String[] attrs, String[] ocs)
     throws NamingException {
     DirContext attrRoot =
     (DirContext)ctx.getSchema("").lookup("AttributeDefinition");
     printSchema(attrRoot, attrs);
     DirContext ocRoot =
     (DirContext)ctx.getSchema("").lookup("ClassDefinition");
     printSchema(ocRoot, ocs);
private void printSchema(DirContext ctx, String[] ids) {
     for (int i = 0; i < ids.length; i++) {
     try {
          System.out.print(ids[i] + ": ");
          System.out.print(ctx.getAttributes(ids));
     } catch (NamingException e) {
     } finally {
          System.out.println();
private int processCommandLine(String[] args) {
     String option;
     boolean schema = false;
     boolean list = false;
     for (int i = 0; i < args.length; i++) {
     option = args[i];
     if (option.startsWith("-h")) {
          printUsage(null);
     if (option.startsWith("-s")) {
          schema = true;
          netscapebug = option.equals("-sn");
          netscape41bug = option.equals("-sn41");
          activeDirectorySchemaBug = option.equals("-sad");
     } else if (option.startsWith("-l")) {
          list = true;
     } else if (option.startsWith("-a")) {
          auth = option.substring(2);
     } else if (option.startsWith("-n")) {
          dn = option.substring(2);
     } else if (option.startsWith("-p")) {
          passwd = option.substring(2);
     } else if (option.startsWith("-trace")) {
          traceLdap = true;
     } else {
          // invalid option
          printUsage("Invalid option");
     if (!schema) {
     return LIST;
     } else {
     return UPDATE;
protected void printUsage(String msg) {
     printUsageAux(msg, "Java");
protected void printUsageAux(String msg, String key) {
     if (msg != null) {
     System.out.println(msg);
System.out.print("Usage: ");
System.out.println("java [-Djava.naming.provider.url=<ldap_server_url>] \\");
System.out.println(" Create" + key + "Schema [-h|-l|-s[n|n41|ad]] [-n<dn>] [-p<passwd>] [-a<auth>]");
System.out.println();
System.out.println(" -h\t\tPrint the usage message");
System.out.println(" -l\t\tList the " + key + " schema in the directory");
System.out.println(" -sn\tUpdate schema:");
System.out.println(
"\t\t -sn use workaround for Netscape Directory pre-4.1 schema bug");
System.out.println(
"\t\t -sn41 use workaround for Netscape Directory 4.1 schema bug");
System.out.println(
"\t\t -sad use workaround for Active Directory schema bug");
System.out.println(" -n<dn>\tUse <dn> as the distinguished name for authentication");
System.out.println(" -p<passwd>\tUse <passwd> as the password for authentication");
System.out.println(" -a<auth>\tUse <auth> as the authentication mechanism");
System.out.println("\t\t Default is 'simple' if dn specified; otherwise 'none'");
     System.exit(-1);

Server with same Profile cannot access same networking

Hi,
I have a lab running 1 x Nexus 5010, 2 x FIC 6120'XP's, UCS 5108 and 2 x B200 M2 Blades. I have configured everything per flexpod guidelines (except I have only 1 Nexus). I boot from SAN over Fibre and zoning everything is working 100% My firmware is 2.1(1f)
Question:
Assinged to each blade is 2 vNICs connected to FabricA and FabricB (FabricA = port-channel from FICA to Nexus and FabricB = port-channel from FICB to Nexus - Nexus has 2 different port-channels conf for each link to each FIC)
After I install VMware, I tag vlan 10 (management vlan) for the management traffic of each VMware node. The funny thing is when I ping server 2, iget a response but not from server 1. Both are configured using the same service profile. If I ping server 1 from server 2, I get a response. This leads me to believe that for some reason the traffic is not leaving the FIC from server 1, but it is when using server 2. I have attached screenshots of both servers vifpaths.
Can someone please help urgently as this is driving me crazy as I do not know what the hell is going on.
Cheers

Hello
Hope this solution will help.
Just found my notes on deleting the users profile:
"Deleted Profile logs back in with temporary profile.
This problem occurs if the current user's profile was accidentally deleted from the system.
Note: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems might occur if you modify the registry incorrectly. Therefore, make sure that you follow these steps carefully. For added protection, back up the registry before you modify it. Then, you can restore the registry if a problem occurs. For more information about how to back up and restore the registry
1. Log on to the system by using an administrative user account other than the user account that is experiencing the problem.
2. Back up all data in the current user's profile folder if the profile folder still exists, and then delete the profile folder. By default, the profile resides in the following location:
%SystemDrive%\Users\UserName
3. Click Start, type regedit in the Start Search box, and then press ENTER.
If you are prompted for an administrator password or for confirmation, type your password, or click Continue.
4.Locate the following registry subkey:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList
5.Under the ProfileList subkey, delete the subkey that is named SID.bak.
Note SID is a placeholder for the security identifier (SID) of the user account that is experiencing the problem. The SID.bak subkey should contain a ProfileImagePath registry entry that points to the original profile folder of the user account that is experiencing the problem.
6. Exit Registry Editor.
7. Log off the system.
8. Log on to the system again."
& for more information kindly check the below link too :- http://community.spiceworks.com/topic/187995-network-pc-cannot-access-1-specific-server .
Regards
keshav

Every time I try to access my email on my iPad it says "cannot access mail, server has failed" Anyone know what I need to do?

Every time now I try to access my email on my iPad it says "cannot access email the server has failed" Anyone know what I need to do to fix it?

Hello sandy1972
Check out the article below to troubleshoot issues with accessing your email on your iPad. Make sure that the settings are correct for your email address if you are using on that you set up yourself.
iOS: Troubleshooting Mail
http://support.apple.com/kb/ts3899
Mail Settings Lookup
https://ssl.apple.com/support/mail-settings-lookup/
Regards,
-Norm G.

Cannot access MobileMe Gallery

I cannot access anyone's (including mine!) MobileMe Gallery with my 3G iPhone. Instead, I get a black screen with an Apple logo and the text, "This request could not be processed."
I'm current with all updates, I've reset the iPhone (several times) and I've cleared the cache on iPhone Safari.
My wife's iPhone has no problem viewing any MobileMe Gallery.
I have no issues with any other website I surf to.
Any ideas?

Came across the same problem today. I was hoping there was a solution here on the discussion boards, but I did find this online:
http://forums.macrumors.com/showthread.php?t=520523
and this
http://www.macosxhints.com/article.php?story=20080804065204249
Basically from what I can gather the site is recognizing that you're on an iPhone and adjusts the URL accordingly (by inserting an /iphone/ into the address. The solution seems to be to type in this address:
http://gallery.me.com/<yourusername>
and it will work. I noticed its not the black gallery I get on mobileme but it works. Still investigating how to set the preferences for this page.
hope this helps.

03.12.12 i cannot access my MobileMe server.

Similar Messages

Maybe you are looking for