03 - Ins. lot
Hi All -
We are using 03 - inspection type for in-process inspection. However, we don't want system to automatically create IL when process order is created.
Is there any way to prevent this in automatic inspection lot creating for 03 inspection lot.
Another option for in-process inspections would be to use inspection type 89. The problem with that is that I have not found a way to enter a process order when creating the inspection lot manually. There is obviously a field for process order, but it is not available for this inspection type. If we use this inspection type, we will need to maintain multiple inspection plans per material because it uses a different task list.
Please advice
Regards
S
Hi,
Thank you very much for the response,
My issue was resolved. The solution what was recommended is set-up material master with 04 inspection type which will be used for creating IL after production GR as well as manual IL creation using QA01 transaction code without material. This would avoid me using 03 IL which automatically creates IL when process order is created.
Thanks for the recommendations. Awarding points.
S
Similar Messages
-
MNT ordr can not generated ins lot
I am crtd
1. Equipmet 2. maint plan with Ins point and sampling procedure 4, task list etc.
But when I REL MNT ordr it gives error that Ins lot can not be generated coz ins point are not defined in Mnt plan, but ins point 300 are assigned in the MNT plan.
what is the reason , that lot is not created in th system,
can u plz tell me?
Regds
Siddheshhi siddhes
kindly check the following reasons
This example shows how the system responds when it creates an inspection lot, depending on which planning activities were completed.
The first table below provides an overview of several examples (cases) in which different combinations of planning steps were completed. The second table shows how the system responds in each case.
Planning Steps Case 1 Case 2 Case 3 Case 4 Case 5 Case 6 Case 7
Was the inspection type assigned to the order type?
No Yes Yes Yes Yes Yes Yes
Was the maintenance task list assigned to an order?
- No Yes Yes Yes Yes Yes
Did you specify the field combination for inspection points in the maintenance task list?
- - No Yes Yes Yes Yes
Does the control key for the operation specify inspection characteristics?
- - - No No Yes Yes
Have inspection points been assigned to the operation?
- - - No Yes No Yes
See 1 See 2 See 3 See 4 See 5 See 6 See 7
Case / Item
System response
1 The inspection lot is not created.
2 The inspection lot is not created and the system records the status ILNC (inspection lot not created) in the maintenance order.
3 The system creates the inspection lot and records the status ILCR (inspection lot created) in the maintenance order. In addition:
The maintenance task list is assigned to the inspection lot.
Inspection characteristics are not created.
In this case, maintain the inspection point in the maintenance task list; then call up the function to change an inspection lot to create the inspection specifications.
4 The system creates the inspection lot and records the status ILCR (inspection lot created) in the maintenance order. In addition:
The system does not create inspection characteristics.
You can create unplanned inspection characteristics.
5 The system creates the inspection lot and records the status ILCR (inspection lot created) in the maintenance order. In addition:
The system creates inspection characteristics.
The system sets the status ICHA (planned inspection characteristics assigned) in the operation specified in the maintenance order.
The operation in the selection screen for results recording is highlighted and printed on inspection instruction.
You can create unplanned inspection characteristics.
6 The system creates the inspection lot and records the status ILCR (inspection lot created) in the maintenance order. In addition:
The system does not create inspection characteristics.
The operation in the selection screen for results recording is highlighted and printed on inspection instruction.
You can create unplanned inspection characteristics.
7 The system creates the inspection lot and records the status ILCR (inspection lot created) in the maintenance order. In addition:
The system creates inspection characteristics.
The system sets the status ICHA (planned inspection characteristics assigned) in the order operation.
The operation in the selection screen for results recording is highlighted and printed on inspection instruction.
You can create unplanned inspection characteristics.
regard
thyagarajan -
Ins lot creation at componenyt Good receipt (Ins type 01)
Hi
We are doing the good receipt of external procured items and for a material (A) and a unique batch (B) if Good receipts are at different point of time still we generate inspection lot/sample plan only at first good receipt. There is no new insp lot/sample plan generated whenever was the last good receipt.This is standard SAP.
Now we want that if last good receipt for a mareial (A) and batch (B) was older than one year then a new insp lot/sample plan should be generated( Since vendor is supplying the same batch for which we had good receipt one year before).
Please suggest how to map it. Is there any user exit to it?
ThanxHello Vineet,
you could do the following:
Set the inspection setting to ' ' for each GR
Then activate the exit QAAT0001 in which you could create the following IF clause:
IQALS is an internal table.
Please don't forget the following line!
E_TQ32 = I_TQ32.
IF I_TQ32-HERKUNFT = '01'.
Select * from QALS into IQALS where
HERKUNFT = ITQ32-HERKUNFT
MATNR = I_MATNR
WERKS = I_WERKS and
CHARG = I_CHARG.
IF SY-SUBRC IS INITIAL.
LOOP AT IQALS.
IF IQALS-ENSTEHDAT < SY-DATUM - 365.
E_NO_INSPECTION = 'X'
ENDIF.
ENDLOOP.
ENDIF.
ENDIF.
I think that simular coding might resolve the described issue.
Regards,
Isabelle
Edited by: Isabelle Britten on May 7, 2008 12:58 PM -
Inspection lot generation for 343 movement type.
Hi,expert,
My client's requirement is to generate inspection lot when a specific type of material is transferred from block stock of a storage location to unrestricted stock of another storage location i.e. movement type- 343, can anybody please explain how to generate the inspection lot and what are the settings, master data to be maintained? thanks in advance.
rgds
rajibHi Rajib,
In first place you need to have Quality infor record for material and vendor create through QI01 t code.
QM must be activated for mvt type 343 in SPRO --> QM --> Qual Insp --> Insp Lot Creation --> Inspection for goods movements.
Check the box "QM Proc. Active" in Mat master in Quality tab.
Activate inspection type 08 in mat master.
Then do the transfer posting you will get mat doc number.
Go to display mode of mat doc,
You will find Ins lot number created in Quantity tab at item level of material document.
Thank You,
Anand K -
Goods issues to Quality inspection
Dear friends,
I have deactivated QM not active(Removed the check ) in IMG/Quality management/QUality inspection/Deactivate movement types for QM for the movement type--103.
So while GR-MIGO-ins.lot is created and QA32--QM people placed in Unrestricted stock.
So through 105 automatically material is placed in Quality inspection.
Requirement is that for Goods issues also Material has to be inspected by QM.
Then I deactivated for movtype-201, Then Qualty inspection lots are created.
But I do 201,material stock is reducing but Quality inspection lot is creating.
But Material shall not be issued,it shall be through QM after relasing only issued to cost center, similar to Goods reciept.
How it can be done,
please suggest.
Regards,
CanandHello Anand,
if I understand you correctly you are creating Inspection lots of the 02 inspection origin, and you want these to be stock relevant.
This is not possible only certain inspection lot origins are stock relevant i.e. 01, 04, 05 and 08.
I hope that this puts more light on the issue.
Regards,
Isabelle -
I'm having the material i.e solvent qty in one batch number. I received same material with other batch number. That receiving batch number will go to Quality. After analysis we will mix the two batches i.e previous one and received one with a new batch number. While mixing i activated QM '08' inspection type. While doing MB1B i'm getting two lot numbers. But i need only one lot number. How can i?
Hi Narendra,
Please set following settings in the Material master QM view to get the Single inspection Lot for when you mix the multiple batches
In Material master QM viewInspection Set up_*08-In the Control ins lot --select the 1-For each material document, material , batch,stotrage location*
Thanks,
Rajanikanth -
IQ09 - Different process for material with bacth Split and no Batch
Hello,
i want to know if IQ09 treats material with batch number and no batch in the same way for fetching the serial number.
view V_EQUI_EQBS_SML is used to fetch the serial numbers.
i just need to confirm if the process is same in case a material has batch & no Batch together.
Thanks
RenuHi,
We faced the same problem and went back to option:
Cont.Ins Lot creation (QMAT-CHG) = "For each Material Document item
This solves the problem and was in our case the solution for receipts from production. But at goods receipt for purchase orders we still use the option for each material document, batch and SL.
There we pick up the materials in WM by hand by scanning the bar codes on the pallets (printed at GR). The transfer order creates a negative quant in unrestricted use that is later filled by the automatic usage decision that moves the stock from quality to unrestricted in the same bin.
Hope this helps.....
Arno -
Material with Skip Inspection but no Skip-to-stock goods movement
We have a material with the following QM setting:
Inspection Type : 01 (Active)
Skips Allowed = Yes
automatic usage decision = Yes
Inspection with Task list = No
Dynamic Modification Rule = Set
Cont.Ins Lot creation (QMAT-CHG) = "1. For each Material Doc, material, batch and sloc)
Current DMR Stage is a Skip Stage
For the above settings, when a GR is done for a material in Skip status, the system creates a Inspection Lot with status "SKIP" but still moves the stock to Q-stock.
We expect the movement to be to "unrest" but this does not happen. Also, this Q-Stock Stock Type prints on the GR Slip, which incorrectly prompts the goods to be sent to Quality Inspection. This causes a lot of confusion in the GR/Inspection process
I contacted SAP and they came back with this very unclear message:
if you are using any form of the inspection lot collection the quantity of the inspection lot will be cumulated during the goods receipt postings. So a skip-to-stock would be dangerous as no check of the quality (UD) of the coming goods receipt would occur after the first goods receipt
Has anyone else had this issue? Is there a use-exit that will work around this and move stock directly to Unrestricted use stock?Hi,
We faced the same problem and went back to option:
Cont.Ins Lot creation (QMAT-CHG) = "For each Material Document item
This solves the problem and was in our case the solution for receipts from production. But at goods receipt for purchase orders we still use the option for each material document, batch and SL.
There we pick up the materials in WM by hand by scanning the bar codes on the pallets (printed at GR). The transfer order creates a negative quant in unrestricted use that is later filled by the automatic usage decision that moves the stock from quality to unrestricted in the same bin.
Hope this helps.....
Arno -
My partner does pretty high end graphics, animation etc. and has pretty much tapped out his G4 DP 500.
A lot of programs we have are Adobe CS, After effects plug-ins, lots of stuff that isn't written for Intel yet.
I'm confused about how well those programs will run on an Intel Mac or whether they'll run at all, or in some separate mode (so green with all this).
We do need to upgrade him but I'm not sure whether we should get a used Non-Intel Mac like my G5 DP 2.0 or 2.5 and wait or whether we won't run into all kinds of software problems on an Intel Mac at this point. Any references or input much appreciated.
thanks
enzosfI have a DP G5 at home and a (brand new) Core2Duo iMac at work and use CS2 quite a bit. I also used the CS3 Photoshop beta for a while. I've found the CS2 runs a bit slower on my Intel iMac and MacBook than on my G5 and with some filters and plug-ins the difference is very noticeable. I can't say that CS2 is unusable on an Intel computer, that isn't true at all. But it sometimes reminds me of how I sometimes started a task at work (on my G4 iMac) and then completed it at home to take advantage of my G5's speed.
Despite it's obvious beta state, I was very excited by the CS3 Photoshop beta. While my two Intel computers didn't blow away my G5 desktop running the beta, the difference between the beta and the older PPC version of PS substantial. I'm looking forward to getting my upgrade (and happy that work pays for it, not me!)
But now for the bad news. All our old plug-ins are PPC and will have to be re-compile (if not rewritten) before we can use them on our Intel computers. (I assume we could run CS3 applications in Rosetta mode and use our plug-ins, but that would defeat the purpose!) I faced this situation once before - when I made the shift from OS 9 to OS X - and I had to bounce back and forth between OS X and Classic mode for a while. I expect I'll be keeping CS2 on my Intel computers for a while.
Now back to your problem. Upgrade to Intel and buy CS3 to boot? Or take the smaller step of buying a G5 computer and waiting for all your plug-ins to be upgraded too? Were I in your shoes I'd look for a good inexpensive G5 desktop or iMac. -
hi,
when i am using the record usages decision i.e QA11it show me no any list
i already maintain
material, Quility info record, inspection method sampling schema , sampling procedure , Dyanamic Modification rule , inspection plan
please suggest me where i am wrong and how to get data in usages decision
Regards
Maashishtry it in QA32
with the ins lot no
Go to QA02 and give the Inspection Lot no and press enter.
In the new screen, select the tab "Inspection Specification/Task" and in that press the "Task List" button. Then you will receive a msg that Inspection Plan is attached to Inspection Lot.
You can go to the "Sampling" tab and click the "Sample" Button if you want to assign a sampling procedure & plan.
After that press save.
Now the status becomes REL.
Next, you can do the Result Recording (from QA32 screen or use QE51N)
Once all results are entered and saved, the status become INSP.
Now, do the Usage Decision (QA32 / QA11) and here give the acceptace code and post the stock into Unrestricted stock
If no Inspection Plan is found,
1. Inspection Plan is not available. Check in QP03 for the material/plant combination the availability of plan. If not available, create it using QP01.
2. The date of creation of Plan is later that date of creation of Inspection Lot. In this case, in QA02 give the key date as before the date of creation of plan.
regards
kunal -
Logic Studio , Lion and a lot of 3d party plug-ins and apps....
Guys,
Apple released Lion but I find the information concerning the tandem Lion-Logic very sparse...
To install Lion or not using LogicPro,that is the question...I use a lot of 3dparty plug-ins but somebody told me that with Lion-Logic Pro you can only use 64bit plug-ins....
Anyone got some info?? Come-on Apple!!
for the rest : Very happy with my Snow Leopard-Logic9 :-)
Club Filth
isound.com/club_filthDid they drop 32-bit bridge because it uses Rosetta? Or just because they felt like it?
I'm pretty disappointed with Apple over their recent decisions (like Final Cut X). And before anyone says "but no one is forcing you to upgrade", well, I have no plans to upgrade my 30+ users - but if I need to buy a new machine for one or more of them, it will probably come with Lion pre-installed. Will it be able to run Snow Leopard? I don't know yet, but I bet the answer will soon be "no". That will be a major blow to my company, although it will likely boost the market for used machines.
Maybe our situation is somewhat unique, but, as content creators, we are often asked to go back and revise or rework older tracks, sometimes years old. When I can't run the software instruments on those tracks (because they are 32-bit, or PPC, or whatever), then I have to recreate some or all of the tracks from scratch, and that is a huge time waster. Long after the PPC to Intel transition, I had to keep some G5's around just for this purpose. Now I will have to keep machines running Snow Leopard around, probably indefinitely. -
A lot of my plug-ins say RESEARCH. I am not sure what that means. Sould I delete them?
half of my plug-ins say up to date on a button. The other half of them say research on the button. What do I do?
Hi Celia51510,
Welcome to the Support Communities!
The article below may be able to help you with this issue.
Click on the link to see more details and screenshots.
I can't tell from your post if you are using a Windows or a Mac Computer.
Try deleting the iTunes application and redownloading the version you need below:
iTunes 11.1 Download for Mac
http://support.apple.com/kb/DL1614
iTunes 11.1 for Windows (64-bit)
http://support.apple.com/kb/DL1615
Cheers,
- Judy -
As it says above, i have been having a lot f trouble with my ipod classic and the latest itunes update, i was unable to sync songs or anything to it and have tried every conceivable 'fix' i could find. i have run an itunes diagnostic and the results are posted below. a major problem is that when i try and view my ipod through my computer it displays nothing at all on the ipod, no files or anything, this may be the problem but i have no idea how it has happened or how i could resolve it.
This ipod holds huge sentimental value and i am loathe to buy a new one! If anybody can help it is greatly appreciated, than kyou in advanced.
Microsoft Windows 7 x64 Home Premium Edition Service Pack 1 (Build 7601)
ASUSTeK Computer Inc. K50IJ
iTunes 11.1.5.5
QuickTime not available
FairPlay 2.5.16
Apple Application Support 3.0.1
iPod Updater Library 11.1f5
CD Driver 2.2.3.0
CD Driver DLL 2.1.3.1
Apple Mobile Device 7.1.1.3
Apple Mobile Device Driver 1.64.0.0
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.6.502
Gracenote MusicID 1.9.6.115
Gracenote Submit 1.9.6.143
Gracenote DSP 1.9.6.45
iTunes Serial Number 0038B8600B98D1E0
Current user is not an administrator.
The current local date and time is 2014-03-21 16:52:39.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is not supported.
Core Media is supported.
Video Display Information
Intel Corporation, Mobile Intel(R) 4 Series Express Chipset Family
Intel Corporation, Mobile Intel(R) 4 Series Express Chipset Family
**** External Plug-ins Information ****
No external plug-ins installed.
Genius ID: 2fd81a1f13cf3ff25a8b4f0e8e725116
**** Device Connectivity Tests ****
iPodService 11.1.5.5 (x64) is currently running.
iTunesHelper 11.1.5.5 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
Universal Serial Bus Controllers:
Intel(R) ICH9 Family USB Universal Host Controller - 2934. Device is working properly.
Intel(R) ICH9 Family USB Universal Host Controller - 2935. Device is working properly.
Intel(R) ICH9 Family USB Universal Host Controller - 2936. Device is working properly.
Intel(R) ICH9 Family USB Universal Host Controller - 2937. Device is working properly.
Intel(R) ICH9 Family USB Universal Host Controller - 2938. Device is working properly.
Intel(R) ICH9 Family USB Universal Host Controller - 2939. Device is working properly.
Intel(R) ICH9 Family USB2 Enhanced Host Controller - 293A. Device is working properly.
Intel(R) ICH9 Family USB2 Enhanced Host Controller - 293C. Device is working properly.
No FireWire (IEEE 1394) Host Controller found.Here is what worked for me:
My usb hub, being usb2, was too fast. I moved the wire to a usb port directory on my pc. That is a usb1 port which is slow enough to run your snyc. -
LOTS of spinning wheels in Mountain Lion--multiple applications, ALL the time
Sep 6, 2012 1:55 AM (in response to teacher24_70)
Having the exact same issue. Also, on right click, many apps freeze/beachball and must force close. Additionally, uTorrent and Transmission are not operating correctly-uTorrent constantly beachballing and unresponsive. Right-click freezes with everything from Word to iMovie. Takes way too much time to do anything, and lots of cursor freezing, here is a sys log excerpt:
Sep 6 01:20:42 Matthews-MacBook-Pro-4 com.apple.launchd[1] (com.daz3d.content_management_service): Throttling respawn: Will start in 10 seconds
Sep 6 01:20:43 Matthews-MacBook-Pro-4.local Google Chrome[271]: Cannot find function pointer pluginFactory for factory 053918F4-2869-11D7-A671-000A27E2DB90 in CFBundle/CFPlugIn 0x808d2800 </Users/happymatt/Library/Contextual Menu Items/ToastIt.plugin> (not loaded)
Sep 6 01:20:43 Matthews-MacBook-Pro-4.local Google Chrome[271]: Cannot find function pointer AntiCMPlugInFactory for factory E7083DE8-B37D-11D9-9B46-000D935563B0 in CFBundle/CFPlugIn 0x808d05b0 </Library/Contextual Menu Items/Antidote - MC.plugin> (not loaded)
Sep 6 01:20:52 Matthews-MacBook-Pro-4 com.apple.launchd[1] (com.daz3d.content_management_service): Throttling respawn: Will start in 10 seconds
Sep 6 01:20:54 Matthews-MacBook-Pro-4.local WindowServer[86]: CGXDisableUpdate: UI updates were forcibly disabled by application "µTorrent" for over 1.00 seconds. Server has re-enabled them.
Sep 6 01:20:59 Matthews-MacBook-Pro-4.local WindowServer[86]: reenable_update_for_connection: UI updates were finally reenabled by application "µTorrent" after 6.13 seconds (server forcibly re-enabled them after 1.00 seconds)
Sep 6 01:21:02 Matthews-MacBook-Pro-4 com.apple.launchd[1] (com.daz3d.content_management_service): Throttling respawn: Will start in 10 seconds
Sep 6 01:21:32 --- last message repeated 2 times ---
Sep 6 01:21:32 Matthews-MacBook-Pro-4 com.apple.launchd[1] (com.daz3d.content_management_service): Throttling respawn: Will start in 10 seconds
Sep 6 01:21:40 Matthews-MacBook-Pro-4.local WindowServer[86]: CGXDisableUpdate: UI updates were forcibly disabled by application "µTorrent" for over 1.00 seconds. Server has re-enabled them.
Sep 6 01:21:42 Matthews-MacBook-Pro-4 com.apple.launchd[1] (com.daz3d.content_management_service): Throttling respawn: Will start in 10 seconds
Sep 6 01:21:47 Matthews-MacBook-Pro-4.local WindowServer[86]: reenable_update_for_connection: UI updates were finally reenabled by application "µTorrent" after 8.50 seconds (server forcibly re-enabled them after 1.00 seconds)
Sep 6 01:21:52 Matthews-MacBook-Pro-4 com.apple.launchd[1] (com.daz3d.content_management_service): Throttling respawn: Will start in 10 seconds
Sep 6 01:22:23 --- last message repeated 2 times ---
Sep 6 01:22:23 Matthews-MacBook-Pro-4 com.apple.launchd[1] (com.daz3d.content_management_service): Throttling respawn: Will start in 10 seconds
Sep 6 01:22:29 Matthews-MacBook-Pro-4.local WindowServer[86]: CGXDisableUpdate: UI updates were forcibly disabled by application "µTorrent" for over 1.00 seconds. Server has re-enabled them.
Sep 6 01:22:33 Matthews-MacBook-Pro-4 com.apple.launchd[1] (com.daz3d.content_management_service): Throttling respawn: Will start in 10 seconds
Sep 6 01:22:37 Matthews-MacBook-Pro-4.local WindowServer[86]: reenable_update_for_connection: UI updates were finally reenabled by application "µTorrent" after 8.81 seconds (server forcibly re-enabled them after 1.00 seconds)
Sep 6 01:22:43 Matthews-MacBook-Pro-4 com.apple.launchd[1] (com.daz3d.content_management_service): Throttling respawn: Will start in 10 seconds
Sep 6 01:23:13 --- last message repeated 2 times ---
Sep 6 01:23:13 Matthews-MacBook-Pro-4 com.apple.launchd[1] (com.daz3d.content_management_service): Throttling respawn: Will start in 10 seconds
Sep 6 01:23:19 Matthews-MacBook-Pro-4.local WindowServer[86]: CGXDisableUpdate: UI updates were forcibly disabled by application "µTorrent" for over 1.00 seconds. Server has re-enabled them.
Sep 6 01:23:22 Matthews-MacBook-Pro-4.local WindowServer[86]: reenable_update_for_connection: UI updates were finally reenabled by application "µTorrent" after 3.61 seconds (server forcibly re-enabled them after 1.00 seconds)
Sep 6 01:23:23 Matthews-MacBook-Pro-4 com.apple.launchd[1] (com.daz3d.content_management_service): Throttling respawn: Will start in 10 seconds
Sep 6 01:23:53 --- last message repeated 2 times ---
Sep 6 01:23:53 Matthews-MacBook-Pro-4 com.apple.launchd[1] (com.daz3d.content_management_service): Throttling respawn: Will start in 10 seconds
Sep 6 01:23:56 Matthews-MacBook-Pro-4.local WindowServer[86]: CGXDisableUpdate: UI updates were forcibly disabled by application "µTorrent" for over 1.00 seconds. Server has re-enabled them.
Sep 6 01:24:02 Matthews-MacBook-Pro-4.local WindowServer[86]: reenable_update_for_connection: UI updates were finally reenabled by application "µTorrent" after 7.20 seconds (server forcibly re-enabled them after 1.00 seconds)
Sep 6 01:24:03 Matthews-MacBook-Pro-4 com.apple.launchd[1] (com.daz3d.content_management_service): Throttling respawn: Will start in 10 seconds
Sep 6 01:24:24 --- last message repeated 2 times ---
Sep 6 01:24:24 Matthews-MacBook-Pro-4.local WindowServer[86]: CGXDisableUpdate: UI updates were forcibly disabled by application "Safari" for over 1.00 seconds. Server has re-enabled them.
Sep 6 01:24:27 Matthews-MacBook-Pro-4.local WindowServer[86]: reenable_update_for_connection: UI updates were finally reenabled by application "Safari" after 4.25 seconds (server forcibly re-enabled them after 1.00 seconds)
Sep 6 01:24:33 Matthews-MacBook-Pro-4 com.apple.launchd[1] (com.daz3d.content_management_service): Throttling respawn: Will start in 10 seconds
Sep 6 01:24:59 --- last message repeated 2 times ---
Sep 6 01:24:59 Matthews-MacBook-Pro-4.local WindowServer[86]: CGXDisableUpdate: UI updates were forcibly disabled by application "µTorrent" for over 1.00 seconds. Server has re-enabled them.
Sep 6 01:25:04 Matthews-MacBook-Pro-4 com.apple.launchd[1] (com.daz3d.content_management_service): Throttling respawn: Will start in 10 seconds
Sep 6 01:25:07 Matthews-MacBook-Pro-4.local WindowServer[86]: reenable_update_for_connection: UI updates were finally reenabled by application "µTorrent" after 8.59 seconds (server forcibly re-enabled them after 1.00 seconds)
Sep 6 01:25:14 Matthews-MacBook-Pro-4 com.apple.launchd[1] (com.daz3d.content_management_service): Throttling respawn: Will start in 10 seconds
Sep 6 01:25:44 --- last message repeated 2 times ---
Sep 6 01:25:44 Matthews-MacBook-Pro-4.local WindowServer[86]: CGXDisableUpdate: UI updates were forcibly disabled by application "µTorrent" for over 1.00 seconds. Server has re-enabled them.
Sep 6 01:25:44 Matthews-MacBook-Pro-4.local WindowServer[86]: reenable_update_for_connection: UI updates were finally reenabled by application "µTorrent" after 1.24 seconds (server forcibly re-enabled them after 1.00 seconds)
Sep 6 01:25:44 Matthews-MacBook-Pro-4 com.apple.launchd[1] (com.daz3d.content_management_service): Throttling respawn: Will start in 10 seconds
Sep 6 01:26:14 --- last message repeated 2 times ---
Sep 6 01:26:14 Matthews-MacBook-Pro-4 com.apple.launchd[1] (com.daz3d.content_management_service): Throttling respawn: Will start in 10 seconds
Sep 6 01:26:36 --- last message repeated 2 times ---
Sep 6 01:26:36 Matthews-MacBook-Pro-4.local WindowServer[86]: CGXDisableUpdate: UI updates were forcibly disabled by application "µTorrent" for over 1.00 seconds. Server has re-enabled them.
Sep 6 01:26:42 Matthews-MacBook-Pro-4.local WindowServer[86]: reenable_update_for_connection: UI updates were finally reenabled by application "µTorrent" after 7.22 seconds (server forcibly re-enabled them after 1.00 seconds)
Sep 6 01:26:44 Matthews-MacBook-Pro-4 com.apple.launchd[1] (com.daz3d.content_management_service): Throttling respawn: Will start in 10 seconds
Sep 6 01:27:06 --- last message repeated 2 times ---
Sep 6 01:27:06 Matthews-MacBook-Pro-4.local purge[1528]: <CPPathUtils.c:526> The device-file for this operating system, 'osx-12.1.0.xml', was not found. An attempt to revert to a previous revision of the OS device-file: 'osx-12.0.0.xml' has been made. Please file a Radar report with Apple, on the 'CoreProfile' component, version 'X'.
Sep 6 01:27:20 Matthews-MacBook-Pro-4.local WindowServer[86]: CGXDisableUpdate: UI updates were forcibly disabled by application "µTorrent" for over 1.00 seconds. Server has re-enabled them.
Sep 6 01:27:21 Matthews-MacBook-Pro-4 com.apple.launchd[1] (com.daz3d.content_management_service): Throttling respawn: Will start in 4 seconds
Sep 6 01:27:24 Matthews-MacBook-Pro-4.local WindowServer[86]: reenable_update_for_connection: UI updates were finally reenabled by application "µTorrent" after 5.71 seconds (server forcibly re-enabled them after 1.00 seconds)
Sep 6 01:27:25 Matthews-MacBook-Pro-4 com.apple.launchd[1] (com.daz3d.content_management_service): Throttling respawn: Will start in 10 seconds
Sep 6 01:27:53 --- last message repeated 2 times ---
Sep 6 01:27:53 Matthews-MacBook-Pro-4.local WindowServer[86]: CGXDisableUpdate: UI updates were forcibly disabled by application "µTorrent" for over 1.00 seconds. Server has re-enabled them.
Sep 6 01:27:55 Matthews-MacBook-Pro-4 com.apple.launchd[1] (com.daz3d.content_management_service): Throttling respawn: Will start in 10 seconds
Sep 6 01:28:00 Matthews-MacBook-Pro-4.local WindowServer[86]: reenable_update_for_connection: UI updates were finally reenabled by application "µTorrent" after 7.22 seconds (server forcibly re-enabled them after 1.00 seconds)
Sep 6 01:28:05 Matthews-MacBook-Pro-4 com.apple.launchd[1] (com.daz3d.content_management_service): Throttling respawn: Will start in 10 seconds
Sep 6 01:28:25 --- last message repeated 1 time ---
Sep 6 01:28:25 Matthews-MacBook-Pro-4.local WindowServer[86]: CGXDisableUpdate: UI updates were forcibly disabled by application "µTorrent" for over 1.00 seconds. Server has re-enabled them.
Sep 6 01:28:25 Matthews-MacBook-Pro-4 com.apple.launchd[1] (com.daz3d.content_management_service): Throttling respawn: Will start in 10 seconds
Sep 6 01:28:33 Matthews-MacBook-Pro-4.local WindowServer[86]: reenable_update_for_connection: UI updates were finally reenabled by application "µTorrent" after 8.65 seconds (server forcibly re-enabled them after 1.00 seconds)
Sep 6 01:28:35 Matthews-MacBook-Pro-4 com.apple.launchd[1] (com.daz3d.content_management_service): Throttling respawn: Will start in 10 seconds
Sep 6 01:29:05 --- last message repeated 2 times ---
Sep 6 01:29:05 Matthews-MacBook-Pro-4 com.apple.launchd[1] (com.daz3d.content_management_service): Throttling respawn: Will start in 10 seconds
Sep 6 01:29:08 Matthews-MacBook-Pro-4.local WindowServer[86]: CGXDisableUpdate: UI updates were forcibly disabled by application "µTorrent" for over 1.00 seconds. Server has re-enabled them.
Sep 6 01:29:16 Matthews-MacBook-Pro-4 com.apple.launchd[1] (com.daz3d.content_management_service): Throttling respawn: Will start in 10 seconds
Sep 6 01:29:22 Matthews-MacBook-Pro-4.local WindowServer[86]: disable_update_likely_unbalanced: UI updates still disabled by application "µTorrent" after 15.00 seconds (server forcibly re-enabled them after 1.00 seconds). Likely an unbalanced disableUpdate call.
Sep 6 01:29:24 Matthews-MacBook-Pro-4.local WindowServer[86]: reenable_update_for_connection: UI updates were finally reenabled by application "µTorrent" after 17.09 seconds (server forcibly re-enabled them after 1.00 seconds)
Sep 6 01:29:26 Matthews-MacBook-Pro-4 com.apple.launchd[1] (com.daz3d.content_management_service): Throttling respawn: Will start in 10 seconds
Sep 6 01:29:56 --- last message repeated 2 times ---
Sep 6 01:29:56 Matthews-MacBook-Pro-4 com.apple.launchd[1] (com.daz3d.content_management_service): Throttling respawn: Will start in 10 seconds
Sep 6 01:30:03 Matthews-MacBook-Pro-4.local WindowServer[86]: CGXDisableUpdate: UI updates were forcibly disabled by application "µTorrent" for over 1.00 seconds. Server has re-enabled them.
Sep 6 01:30:06 Matthews-MacBook-Pro-4 com.apple.launchd[1] (com.daz3d.content_management_service): Throttling respawn: Will start in 10 seconds
Sep 6 01:30:12 Matthews-MacBook-Pro-4.local WindowServer[86]: reenable_update_for_connection: UI updates were finally reenabled by application "µTorrent" after 9.74 seconds (server forcibly re-enabled them after 1.00 seconds)
Sep 6 01:30:16 Matthews-MacBook-Pro-4 com.apple.launchd[1] (com.daz3d.content_management_service): Throttling respawn: Will start in 10 seconds
Sep 6 01:30:26 --- last message repeated 1 time ---
Sep 6 01:30:26 Matthews-MacBook-Pro-4 com.apple.launchd.peruser.501[179] ([0x0-0x59059].com.apple.DiskUtility[769]): Exited: Killed: 9
Sep 6 01:30:26 Matthews-MacBook-Pro-4 com.apple.launchd.peruser.501[179] ([0x0-0x1d01d].com.bittorrent.uTorrent[281]): Exited: Killed: 9
Sep 6 01:30:33 Matthews-MacBook-Pro-4.local WindowServer[86]: CGXDeferSurfaces : Invalid source window 231
Sep 6 01:30:33 Matthews-MacBook-Pro-4.local com.apple.ShareKitHelper[1266]: --warning: [ShareKit-XPC] Received XPC_ERROR_CONNECTION_INVALID
Sep 6 01:30:33 Matthews-MacBook-Pro-4.local com.apple.ShareKitHelper[1266]: --warning: [ShareKit-XPC] connectionWithClientInterrupted
Sep 6 01:30:33 Matthews-MacBook-Pro-4.local com.apple.ShareKitHelper[1266]: --warning: [ShareKit] Cancel UI for running services with Client PID: 1235
Sep 6 01:30:36 Matthews-MacBook-Pro-4 com.apple.launchd[1] (com.daz3d.content_management_service): Throttling respawn: Will start in 10 seconds
Sep 6 01:30:43 Matthews-MacBook-Pro-4.local CVMServer[103]: Check-in to the service com.apple.cvmsCompAgent_x86_64 failed. This is likely because you have either unloaded the job or the MachService has the ResetAtClose attribute specified in the launchd.plist. If present, this attribute should be removed.
Sep 6 01:30:44 Matthews-MacBook-Pro-4.local launchctl[1590]: launchctl: Dubious permissions on file (skipping): /Library/LaunchAgents/com.adobe.AAM.Updater-1.0.plist
Sep 6 01:30:45 Matthews-MacBook-Pro-4.local CVMServer[103]: Check-in to the service com.apple.cvmsCompAgent_x86_64 failed. This is likely because you have either unloaded the job or the MachService has the ResetAtClose attribute specified in the launchd.plist. If present, this attribute should be removed.
Sep 6 01:30:46 Matthews-MacBook-Pro-4 kernel[0]: Sandbox: sandboxd(1596) deny mach-lookup com.apple.coresymbolicationd
Sep 6 01:30:46 Matthews-MacBook-Pro-4 com.apple.launchd[1] (com.daz3d.content_management_service): Throttling respawn: Will start in 10 seconds
Sep 6 01:30:47 Matthews-MacBook-Pro-4.local com.apple.quicklook.satellite[1591]: CFBundle 0x7f8ac3c87370 </Library/Audio/Plug-Ins/Components/Flip4Mac WMA Import.component> (bundle, not loaded): bundle is not loadable: The bundle “Flip4Mac WMV Import” couldn’t be loaded because it is damaged or missing necessary resources.
Sep 6 01:30:56 Matthews-MacBook-Pro-4 com.apple.launchd[1] (com.daz3d.content_management_service): Throttling respawn: Will start in 10 seconds
Sep 6 01:31:26 --- last message repeated 2 times ---
Sep 6 01:31:26 Matthews-MacBook-Pro-4 com.apple.launchd[1] (com.daz3d.content_management_service): Throttling respawn: Will start in 10 seconds
Sep 6 01:31:57 --- last message repeated 2 times ---
Sep 6 01:31:57 Matthews-MacBook-Pro-4 com.apple.launchd[1] (com.daz3d.content_management_service): Throttling respawn: Will start in 10 seconds
Sep 6 01:32:12 --- last message repeated 1 time ---
Sep 6 01:32:12 Matthews-MacBook-Pro-4 com.apple.launchd[1] (com.apple.coremedia.videodecoder[1602]): Exit timeout elapsed (20 seconds). Killing
Sep 6 01:32:17 Matthews-MacBook-Pro-4 com.apple.launchd[1] (com.daz3d.content_management_service): Throttling respawn: Will start in 10 seconds
Sep 6 01:32:47 --- last message repeated 2 times ---
Sep 6 01:32:47 Matthews-MacBook-Pro-4 com.apple.launchd[1] (com.daz3d.content_management_service): Throttling respawn: Will start in 10 seconds
Sep 6 01:33:17 --- last message repeated 2 times ---
Sep 6 01:33:17 Matthews-MacBook-Pro-4 com.apple.launchd[1] (com.daz3d.content_management_service): Throttling respawn: Will start in 10 seconds
Sep 6 01:33:47 --- last message repeated 2 times ---
Sep 6 01:33:47 Matthews-MacBook-Pro-4 com.apple.launchd[1] (com.daz3d.content_management_service): Throttling respawn: Will start in 10 seconds
Sep 6 01:34:17 --- last message repeated 2 times ---
Sep 6 01:34:17 Matthews-MacBook-Pro-4 com.apple.launchd[1] (com.daz3d.content_management_service): Throttling respawn: Will start in 10 seconds
Sep 6 01:34:48 --- last message repeated 2 times ---
Sep 6 01:34:48 Matthews-MacBook-Pro-4 com.apple.launchd[1] (com.daz3d.content_management_service): Throttling respawn: Will start in 10 seconds
Sep 6 01:35:14 --- last message repeated 2 times ---
Sep 6 01:35:14 Matthews-MacBook-Pro-4.local 1PasswordAgent[241]: Failed to return databaseID, encryption key is not loaded
Sep 6 01:35:14 Matthews-MacBook-Pro-4.local 1PasswordAgent[241]: Incorrect password, failed to verify key [5057D5F949924084807D7C8DDB02E833]
Sep 6 01:35:14 Matthews-MacBook-Pro-4.local 1PasswordAgent[241]: Incorrect password, failed to verify key [EF0ED6A834EA4FE8AE6CE569E06DEBDA]
Sep 6 01:35:14 Matthews-MacBook-Pro-4.local 1PasswordAgent[241]: Not enough encryption keys found in [file://localhost/Users/happymatt/Desktop/SECURITY:ENCRYPTION/1Password%202.agi lekeychain/data/default/1password.keys]: 0. The master password entered incorrectly.
Sep 6 01:35:15 Matthews-MacBook-Pro-4.local 1PasswordAgent[241]: Failed to return databaseID, encryption key is not loaded
Sep 6 01:35:18 Matthews-MacBook-Pro-4 com.apple.launchd[1] (com.daz3d.content_management_service): Throttling respawn: Will start in 10 seconds
Sep 6 01:35:19 Matthews-MacBook-Pro-4.local 1PasswordAgent[241]: Failed to return databaseID, encryption key is not loaded
Sep 6 01:35:26 Matthews-MacBook-Pro-4.local Safari[1472]: *** WARNING: -[NSImage dissolveToPoint:fraction:] is deprecated in MacOSX 10.8 and later. Please use -[NSImage drawAtPoint:fromRect:operation:fraction:] instead.
Sep 6 01:35:26 Matthews-MacBook-Pro-4.local Safari[1472]: *** WARNING: -[NSImage dissolveToPoint:fromRect:fraction:] is deprecated in MacOSX 10.8 and later. Please use -[NSImage drawAtPoint:fromRect:operation:fraction:] instead.
Sep 6 01:35:26 Matthews-MacBook-Pro-4.local Safari[1472]: *** WARNING: -[NSImage compositeToPoint:operation:] is deprecated in MacOSX 10.8 and later. Please use -[NSImage drawAtPoint:fromRect:operation:fraction:] instead.
Sep 6 01:35:26 Matthews-MacBook-Pro-4.local Safari[1472]: *** WARNING: -[NSImage compositeToPoint:fromRect:operation:] is deprecated in MacOSX 10.8 and later. Please use -[NSImage drawAtPoint:fromRect:operation:fraction:] instead.
Sep 6 01:35:28 Matthews-MacBook-Pro-4 com.apple.launchd[1] (com.daz3d.content_management_service): Throttling respawn: Will start in 10 seconds
Sep 6 01:35:33 Matthews-MacBook-Pro-4.local CalendarAgent[997]: [com.apple.calendar.store.log.caldav.queue] [Account refresh failed with error: Error Domain=CoreDAVHTTPStatusErrorDomain Code=401 "The operation couldn’t be completed. (CoreDAVHTTPStatusErrorDomain error 401.)" UserInfo=0x7fdf6e3050a0 {AccountName=Google, CalDAVErrFromRefresh=YES, CoreDAVHTTPHeaders=<CFBasicHash 0x7fdf6e3116f0 [0x7fff7579c190]>{type = immutable dict, count = 10,
entries =>
0 : Case Insensitive Key: X-Content-Type-Options = <CFString 0x7fdf6e311770 [0x7fff7579c190]>{contents = "nosniff"}
1 : Case Insensitive Key: Content-Type = <CFString 0x7fdf6e311740 [0x7fff7579c190]>{contents = "text/html; charset=UTF-8"}
2 : Case Insensitive Key: Server = <CFString 0x7fdf6e319f70 [0x7fff7579c190]>{contents = "GSE"}
3 : Case Insensitive Key: Transfer-Encoding = <CFString 0x7fff74a546b8 [0x7fff7579c190]>{contents = "Identity"}
6 : Case Insensitive Key: Date = <CFString 0x7fdf6e317fe0 [0x7fff7579c190]>{contents = "Thu, 06 Sep 2012 08:34:55 GMT"}
7 : Case Insensitive Key: X-Frame-Options = <CFString 0x7fdf6e318070 [0x7fff7579c190]>{contents = "SAMEORIGIN"}
8 : Case Insensitive Key: X-XSS-Protection = <CFString 0x7fdf6e319f50 [0x7fff7579c190]>{contents = "1; mode=block"}
9 : Case Insensitive Key: Www-Authenticate = <CFString 0x7fdf6e31d190 [0x7fff7579c190]>{contents = "BASIC realm="Google CalDAV""}
11 : Case Insensitive Key: Cache-Control = <CFString 0x7fdf6e318040 [0x7fff7579c190]>{contents = "private, max-age=0"}
12 : Case Insensitive Key: Expires = <CFString 0x7fdf6e318010 [0x7fff7579c190]>{contents = "Thu, 06 Sep 2012 08:34:55 GMT"}
Sep 6 01:35:38 Matthews-MacBook-Pro-4 com.apple.launchd[1] (com.daz3d.content_management_service): Throttling respawn: Will start in 10 seconds
Sep 6 01:35:54 --- last message repeated 1 time ---
Sep 6 01:35:54 Matthews-MacBook-Pro-4.local 1PasswordAgent[241]: reloadAllObjects
Sep 6 01:35:54 Matthews-MacBook-Pro-4.local 1PasswordAgent[241]: Database (AGHtmlDatabase:file://localhost/Users/happymatt/Desktop/SECURITY:ENCRYPTION/1P assword%202.agilekeychain/) load time [Cache]: 0.016+0.000 (294 objects)
Sep 6 01:35:56 Matthews-MacBook-Pro-4.local 1PasswordAgent[241]: reloadAllObjects
Sep 6 01:35:56 Matthews-MacBook-Pro-4.local 1PasswordAgent[241]: Database (AGHtmlDatabase:file://localhost/Users/happymatt/Desktop/SECURITY:ENCRYPTION/1P assword%202.agilekeychain/) load time [Cache]: 0.019+0.000 (294 objects)
Sep 6 01:35:58 Matthews-MacBook-Pro-4 com.apple.launchd[1] (com.daz3d.content_management_service): Throttling respawn: Will start in 10 seconds
Sep 6 01:36:18 --- last message repeated 1 time ---
Sep 6 01:36:18 Matthews-MacBook-Pro-4.local 1PasswordAgent[241]: reloadAllObjects
Sep 6 01:36:18 Matthews-MacBook-Pro-4 com.apple.launchd[1] (com.daz3d.content_management_service): Throttling respawn: Will start in 10 seconds
Sep 6 01:36:18 Matthews-MacBook-Pro-4.local 1PasswordAgent[241]: Database (AGHtmlDatabase:file://localhost/Users/happymatt/Desktop/SECURITY:ENCRYPTION/1P assword%202.agilekeychain/) load time [Cache]: 0.015+0.000 (294 objects)
Sep 6 01:36:28 Matthews-MacBook-Pro-4 com.apple.launchd[1] (com.daz3d.content_management_service): Throttling respawn: Will start in 10 seconds
Sep 6 01:36:59 --- last message repeated 2 times ---
Sep 6 01:36:59 Matthews-MacBook-Pro-4 com.apple.launchd[1] (com.daz3d.content_management_service): Throttling respawn: Will start in 10 seconds
Sep 6 01:37:29 --- last message repeated 2 times ---
Sep 6 01:37:29 Matthews-MacBook-Pro-4 com.apple.launchd[1] (com.daz3d.content_management_service): Throttling respawn: Will start in 10 seconds
Sep 6 01:37:59 --- last message repeated 2 times ---
Sep 6 01:37:59 Matthews-MacBook-Pro-4 com.apple.launchd[1] (com.daz3d.content_management_service): Throttling respawn: Will start in 10 seconds
Sep 6 01:38:29 --- last message repeated 2 times ---
Sep 6 01:38:29 Matthews-MacBook-Pro-4 com.apple.launchd[1] (com.daz3d.content_management_service): Throttling respawn: Will start in 10 seconds
Sep 6 01:38:59 --- last message repeated 2 times ---
Sep 6 01:38:59 Matthews-MacBook-Pro-4 com.apple.launchd[1] (com.daz3d.content_management_service): Throttling respawn: Will start in 10 seconds
Sep 6 01:39:30 --- last message repeated 2 times ---
Sep 6 01:39:30 Matthews-MacBook-Pro-4 com.apple.launchd[1] (com.daz3d.content_management_service): Throttling respawn: Will start in 10 seconds
Sep 6 01:40:00 --- last message repeated 2 times ---
Sep 6 01:40:00 Matthews-MacBook-Pro-4 com.apple.launchd[1] (com.daz3d.content_management_service): Throttling respawn: Will start in 10 seconds
Sep 6 01:40:30 --- last message repeated 2 times ---
Sep 6 01:40:30 Matthews-MacBook-Pro-4 com.apple.launchd[1] (com.daz3d.content_management_service): Throttling respawn: Will start in 10 seconds
Sep 6 01:40:48 --- last message repeated 1 time ---
Sep 6 01:40:48 Matthews-MacBook-Pro-4 kernel[0]: CODE SIGNING: cs_invalid_page(0x1000): p=1771[GoogleSoftwareUp] clearing CS_VALID
Sep 6 01:40:50 Matthews-MacBook-Pro-4 com.apple.launchd[1] (com.daz3d.content_management_service): Throttling respawn: Will start in 10 seconds
Sep 6 01:40:51 Matthews-MacBook-Pro-4.local GoogleSoftwareUpdateDaemon[1773]: -[KeystoneDaemon logServiceState] GoogleSoftwareUpdate daemon (1.1.0.3659) vending:
com.google.Keystone.Daemon.UpdateEngine: 2 connection(s)
com.google.Keystone.Daemon.Administration: 0 connection(s)
Sep 6 01:40:51 Matthews-MacBook-Pro-4.local GoogleSoftwareUpdateDaemon[1773]: -[KSUpdateEngine updateProductID:] KSUpdateEngine updating product ID: "com.google.Keystone"
Sep 6 01:40:51 Matthews-MacBook-Pro-4.local GoogleSoftwareUpdateDaemon[1773]: -[KSCheckAction performAction] KSCheckAction checking 1 ticket(s).
Sep 6 01:40:51 Matthews-MacBook-Pro-4.local GoogleSoftwareUpdateDaemon[1773]: -[KSUpdateCheckAction performAction] KSUpdateCheckAction starting update check for ticket(s): {(
<KSTicket:0x253390
productID=com.google.Keystone
version=1.1.0.3659
xc=<KSPathExistenceChecker:0x253740 path=/Library/Google/GoogleSoftwareUpdate/GoogleSoftwareUpdate.bundle/>
serverType=Omaha
url=https://tools.google.com/service/update2
creationDate=2012-08-18 11:28:06
>
Using server: <KSOmahaServer:0x2583a0
engine=<KSDaemonUpdateEngine:0x2044530>
params={
EngineVersion = "1.1.0.3659";
ActivesInfo = {
"com.google.Keystone" = {
LastRollCallPingDate = 2012-09-06 07:00:38 +0000;
LastActivePingDate = 2012-09-06 07:00:38 +0000;
LastActiveDate = 2012-09-06 08:40:51 +0000;
"com.google.Chrome" = {
LastRollCallPingDate = 2012-09-06 07:00:38 +0000;
LastActivePingDate = 2012-09-06 07:00:38 +0000;
LastActiveDate = 2012-09-06 07:42:15 +0000;
"com.google.GoogleDrive" = {
LastRollCallPingDate = 2012-09-06 07:00:38 +0000;
LastActiveDate = 2012-08-31 00:45:54 +0000;
LastActivePingDate = 2012-08-31 07:00:30 +0000;
"com.google.talkplugin" = {
LastRollCallPingDate = 2012-09-06 07:00:38 +0000;
LastActivePingDate = 2012-08-22 07:00:12 +0000;
LastActiveDate = 2012-08-22 02:55:20 +0000;
UserInitiated = 0;
IsSystem = 1;
OmahaOSVersion = "10.8.1_i486";
Identity = KeystoneDaemon;
AllowedSubdomains = (
".omaha.sandbox.google.com",
".tools.google.com",
".www.google.com",
".corp.google.com"
>
Sep 6 01:40:51 Matthews-MacBook-Pro-4.local GoogleSoftwareUpdateDaemon[1773]: -[KSUpdateCheckAction performAction] KSUpdateCheckAction running KSServerUpdateRequest: <KSOmahaServerUpdateRequest:0x259c40
server=<KSOmahaServer:0x2583a0>
url="https://tools.google.com/service/update2"
runningFetchers=0
tickets=1
activeTickets=0
rollCallTickets=0
body=
<?xml version="1.0" encoding="UTF-8" standalone="yes"?>
<o:gupdate xmlns:o="http://www.google.com/update2/request" protocol="2.0" version="KeystoneDaemon-1.1.0.3659" ismachine="1">
<o:os platform="mac" version="MacOSX" sp="10.8.1_i486"></o:os>
<o:app appid="com.google.Keystone" version="1.1.0.3659" lang="en-us" installage="18" brand="GGLG">
<o:updatecheck></o:updatecheck>
</o:app>
</o:gupdate>
>
Sep 6 01:40:51 Matthews-MacBook-Pro-4.local launchctl[1776]: launchctl: Dubious permissions on file (skipping): /Library/LaunchAgents/com.adobe.AAM.Updater-1.0.plist
Sep 6 01:40:54 Matthews-MacBook-Pro-4.local GoogleSoftwareUpdateDaemon[1773]: -[KSUpdateCheckAction(KSServerUpdateRequestDelegate) serverRequest:fetchedWithResponse:] KSUpdateCheckAction received KSServerUpdateResponse: <KSOmahaServerUpdateResponse:0x45437b0
server=<KSOmahaServer:0x2583a0>
url="https://tools.google.com/service/update2"
status=200
tickets=1
activeTickets=0
rollCallTickets=0
data=
<?xml version="1.0" encoding="UTF-8" standalone="yes"?>
<gupdate xmlns="http://www.google.com/update2/response" protocol="2.0" server="prod">
<daystart elapsed_seconds="6017"></daystart>
<app appid="com.google.Keystone" status="ok">
<updatecheck status="noupdate"></updatecheck>
</app>
</gupdate>
>
Sep 6 01:40:54 Matthews-MacBook-Pro-4.local GoogleSoftwareUpdateDaemon[1773]: -[KSUpdateCheckAction(PrivateMethods) finishAction] KSUpdateCheckAction found updates: {( )}
Sep 6 01:40:54 Matthews-MacBook-Pro-4.local GoogleSoftwareUpdateDaemon[1773]: -[KSPrefetchAction performAction] KSPrefetchAction no updates to prefetch.
Sep 6 01:40:54 Matthews-MacBook-Pro-4.local GoogleSoftwareUpdateDaemon[1773]: -[KSMultiUpdateAction performAction] KSSilentUpdateAction had no updates to apply.
Sep 6 01:40:54 Matthews-MacBook-Pro-4.local GoogleSoftwareUpdateDaemon[1773]: -[KSMultiUpdateAction performAction] KSPromptAction had no updates to apply.
Sep 6 01:40:54 Matthews-MacBook-Pro-4.local GoogleSoftwareUpdateDaemon[1773]: -[KSUpdateEngine(PrivateMethods) updateFinish] KSUpdateEngine update processing complete.
Sep 6 01:40:54 Matthews-MacBook-Pro-4.local GoogleSoftwareUpdateDaemon[1773]: -[KSUpdateEngine updateAllProducts] KSUpdateEngine updating all installed products.
Sep 6 01:40:54 Matthews-MacBook-Pro-4.local GoogleSoftwareUpdateDaemon[1773]: -[KSCheckAction performAction] KSCheckAction checking 2 ticket(s).
Sep 6 01:40:54 Matthews-MacBook-Pro-4.local GoogleSoftwareUpdateDaemon[1773]: -[KSUpdateCheckAction performAction] KSUpdateCheckAction starting update check for ticket(s): {(
<KSTicket:0x2643870
productID=com.google.talkplugin
version=3.5.1.8982
xc=<KSPathExistenceChecker:0x2643740 path=/Library/Application Support/Google/GoogleTalkPlugin.app>
serverType=Omaha
url=https://tools.google.com/service/update2
creationDate=2012-08-18 11:28:07
>,
<KSTicket:0x2643480
productID=com.google.Keystone
version=1.1.0.3659
xc=<KSPathExistenceChecker:0x2642ec0 path=/Library/Google/GoogleSoftwareUpdate/GoogleSoftwareUpdate.bundle/>
serverType=Omaha
url=https://tools.google.com/service/update2
creationDate=2012-08-18 11:28:06
>
Using server: <KSOmahaServer:0x204c0e0
engine=<KSDaemonUpdateEngine:0x2044530>
params={
EngineVersion = "1.1.0.3659";
ActivesInfo = {
"com.google.Keystone" = {
LastRollCallPingDate = 2012-09-06 07:00:38 +0000;
LastActivePingDate = 2012-09-06 07:00:38 +0000;
LastActiveDate = 2012-09-06 08:40:51 +0000;
"com.google.Chrome" = {
LastRollCallPingDate = 2012-09-06 07:00:38 +0000;
LastActivePingDate = 2012-09-06 07:00:38 +0000;
LastActiveDate = 2012-09-06 07:42:15 +0000;
"com.google.GoogleDrive" = {
LastRollCallPingDate = 2012-09-06 07:00:38 +0000;
LastActiveDate = 2012-08-31 00:45:54 +0000;
LastActivePingDate = 2012-08-31 07:00:30 +0000;
"com.google.talkplugin" = {
LastRollCallPingDate = 2012-09-06 07:00:38 +0000;
LastActivePingDate = 2012-08-22 07:00:12 +0000;
LastActiveDate = 2012-08-22 02:55:20 +0000;
UserInitiated = 0;
IsSystem = 1;
OmahaOSVersion = "10.8.1_i486";
Identity = KeystoneDaemon;
AllowedSubdomains = (
".omaha.sandbox.google.com",
".tools.google.com",
".www.google.com",
".corp.google.com"
>
Sep 6 01:40:54 Matthews-MacBook-Pro-4.local GoogleSoftwareUpdateDaemon[1773]: -[KSUpdateCheckAction performAction] KSUpdateCheckAction running KSServerUpdateRequest: <KSOmahaServerUpdateRequest:0x2047910
server=<KSOmahaServer:0x204c0e0>
url="https://tools.google.com/service/update2"
runningFetchers=0
tickets=2
activeTickets=0
rollCallTickets=0
body=
<?xml version="1.0" encoding="UTF-8" standalone="yes"?>
<o:gupdate xmlns:o="http://www.google.com/update2/request" protocol="2.0" version="KeystoneDaemon-1.1.0.3659" ismachine="1">
<o:os platform="mac" version="MacOSX" sp="10.8.1_i486"></o:os>
<o:app appid="com.google.talkplugin" version="3.5.1.8982" lang="en-us" installage="18" brand="GGLG">
<o:updatecheck></o:updatecheck>
</o:app>
<o:app appid="com.google.Keystone" version="1.1.0.3659" lang="en-us" installage="18" brand="GGLG">
<o:updatecheck></o:updatecheck>
</o:app>
</o:gupdate>
>
Sep 6 01:40:56 Matthews-MacBook-Pro-4.local GoogleSoftwareUpdateDaemon[1773]: -[KSUpdateCheckAction(KSServerUpdateRequestDelegate) serverRequest:fetchedWithResponse:] KSUpdateCheckAction received KSServerUpdateResponse: <KSOmahaServerUpdateResponse:0x257570
server=<KSOmahaServer:0x204c0e0>
url="https://tools.google.com/service/update2"
status=200
tickets=2
activeTickets=0
rollCallTickets=0
data=
<?xml version="1.0" encoding="UTF-8" standalone="yes"?>
<gupdate xmlns="http://www.google.com/update2/response" protocol="2.0" server="prod">
<daystart elapsed_seconds="6018"></daystart>
<app appid="com.google.talkplugin" status="ok">
<updatecheck status="noupdate"></updatecheck>
</app>
<app appid="com.google.Keystone" status="ok">
<updatecheck status="noupdate"></updatecheck>
</app>
</gupdate>
>
Sep 6 01:40:56 Matthews-MacBook-Pro-4.local GoogleSoftwareUpdateDaemon[1773]: -[KSUpdateCheckAction(PrivateMethods) finishAction] KSUpdateCheckAction found updates: {( )}
Sep 6 01:40:56 Matthews-MacBook-Pro-4.local GoogleSoftwareUpdateDaemon[1773]: -[KSPrefetchAction performAction] KSPrefetchAction no updates to prefetch.
Sep 6 01:40:56 Matthews-MacBook-Pro-4.local GoogleSoftwareUpdateDaemon[1773]: -[KSMultiUpdateAction performAction] KSSilentUpdateAction had no updates to apply.
Sep 6 01:40:56 Matthews-MacBook-Pro-4.local GoogleSoftwareUpdateDaemon[1773]: -[KSMultiUpdateAction performAction] KSPromptAction had no updates to apply.
Sep 6 01:40:56 Matthews-MacBook-Pro-4.local GoogleSoftwareUpdateDaemon[1773]: -[KSUpdateEngine(PrivateMethods) updateFinish] KSUpdateEngine update processing complete.
Sep 6 01:40:59 Matthews-MacBook-Pro-4.local KernelEventAgent[57]: tid 00000000 received event(s) VQ_LOWDISK, VQ_VERYLOWDISK (516)
Sep 6 01:40:59 Matthews-MacBook-Pro-4 kernel[0]: HFS: Vol: Google Chrome 21.0.1180.82-21.0.1180.89 Update Very Low Disk: freeblks: 0, dangerlimit: 12
Sep 6 01:40:59 Matthews-MacBook-Pro-4 com.apple.launchd[1] (com.daz3d.content_management_service): Throttling respawn: Will start in 1 seconds
Sep 6 01:41:00 Matthews-MacBook-Pro-4 com.apple.launchd[1] (com.daz3d.content_management_service): Throttling respawn: Will start in 10 seconds
Sep 6 01:41:01 Matthews-MacBook-Pro-4 kernel[0]: CODE SIGNING: cs_invalid_page(0x1000): p=1804[ksadmin] clearing CS_VALID
Sep 6 01:41:01 Matthews-MacBook-Pro-4 kernel[0]: CODE SIGNING: cs_invalid_page(0x1000): p=1807[ksadmin] clearing CS_VALID
Sep 6 01:41:01 Matthews-MacBook-Pro-4 kernel[0]: CODE SIGNING: cs_invalid_page(0x1000): p=1809[ksadmin] clearing CS_VALID
Sep 6 01:41:02 Matthews-MacBook-Pro-4.local defaults[1813]:
The domain/default pair of (/Applications/Google Chrome.app/Contents/Info, KSBrandID) does not exist
Sep 6 01:41:10 Matthews-MacBook-Pro-4 com.apple.launchd[1] (com.daz3d.content_management_service): Throttling respawn: Will start in 10 seconds
Sep 6 01:41:11 Matthews-MacBook-Pro-4.local GoogleSoftwareUpdateDaemon[1773]: -[KeystoneDaemon logServiceState] GoogleSoftwareUpdate daemon (1.1.0.3659) vending:
com.google.Keystone.Daemon.UpdateEngine: 1 connection(s)
com.google.Keystone.Daemon.Administration: 0 connection(s)
Sep 6 01:41:20 Matthews-MacBook-Pro-4 com.apple.launchd[1] (com.daz3d.content_management_service): Throttling respawn: Will start in 10 seconds
Sep 6 01:41:21 Matthews-MacBook-Pro-4.local GoogleSoftwareUpdateDaemon[1773]: -[KeystoneDaemon main] GoogleSoftwareUpdateDaemon inactive, shutdown.
Sep 6 01:41:30 Matthews-MacBook-Pro-4 com.apple.launchd[1] (com.daz3d.content_management_service): Throttling respawn: Will start in 10 seconds
Sep 6 01:42:01 --- last message repeated 2 times ---
Sep 6 01:42:01 Matthews-MacBook-Pro-4 com.apple.launchd[1] (com.daz3d.content_management_service): Throttling respawn: Will start in 10 seconds
Sep 6 01:42:05 Matthews-MacBook-Pro-4.local purge[2045]: <CPPathUtils.c:526> The device-file for this operating system, 'osx-12.1.0.xml', was not found. An attempt to revert to a previous revision of the OS device-file: 'osx-12.0.0.xml' has been made. Please file a Radar report with Apple, on the 'CoreProfile' component, version 'X'.
Sep 6 01:42:20 Matthews-MacBook-Pro-4 com.apple.launchd[1] (com.daz3d.content_management_service): Throttling respawn: Will start in 2 seconds
Sep 6 01:42:22 Matthews-MacBook-Pro-4 com.apple.launchd[1] (com.daz3d.content_management_service): Throttling respawn: Will start in 10 seconds
Sep 6 01:42:52 --- last message repeated 2 times ---
Sep 6 01:42:52 Matthews-MacBook-Pro-4 com.apple.launchd[1] (com.daz3d.content_management_service): Throttling respawn: Will start in 10 seconds
Sep 6 01:43:22 --- last message repeated 2 times ---
Sep 6 01:43:22 Matthews-MacBook-Pro-4 com.apple.launchd[1] (com.daz3d.content_management_service): Throttling respawn: Will start in 10 seconds
Sep 6 01:43:52 --- last message repeated 2 times ---
Sep 6 01:43:52 Matthews-MacBook-Pro-4 com.apple.launchd[1] (com.daz3d.content_management_service): Throttling respawn: Will start in 10 seconds
Sep 6 01:44:23 --- last message repeated 2 times ---
Sep 6 01:44:23 Matthews-MacBook-Pro-4 com.apple.launchd[1] (com.daz3d.content_management_service): Throttling respawn: Will start in 10 seconds
Sep 6 01:44:53 --- last message repeated 2 times ---
Sep 6 01:44:53 Matthews-MacBook-Pro-4 com.apple.launchd[1] (com.daz3d.content_management_service): Throttling respawn: Will start in 10 seconds
Sep 6 01:45:23 --- last message repeated 2 times ---
Sep 6 01:45:23 Matthews-MacBook-Pro-4 com.apple.launchd[1] (com.daz3d.content_management_service): Throttling respawn: Will start in 10 seconds
Sep 6 01:45:53 --- last message repeated 2 times ---
Sep 6 01:45:53 Matthews-MacBook-Pro-4 com.apple.launchd[1] (com.daz3d.content_management_service): Throttling respawn: Will start in 10 seconds
Sep 6 01:46:23 --- last message repeated 2 times ---
Sep 6 01:46:23 Matthews-MacBook-Pro-4 com.apple.launchd[1] (com.daz3d.content_management_service): Throttling respawn: Will start in 10 seconds
Sep 6 01:46:54 --- last message repeated 2 times ---
Sep 6 01:46:54 Matthews-MacBook-Pro-4 com.apple.launchd[1] (com.daz3d.content_management_service): Throttling respawn: Will start in 10 seconds
Sep 6 01:47:00 Matthews-MacBook-Pro-4.local WebProcess[1474]: *** WARNING: -[NSImage dissolveToPoint:fraction:] is deprecated in MacOSX 10.8 and later. Please use -[NSImage drawAtPoint:fromRect:operation:fraction:] instead.
Sep 6 01:47:00 Matthews-MacBook-Pro-4.local WebProcess[1474]: *** WARNING: -[NSImage dissolveToPoint:fromRect:fraction:] is deprecated in MacOSX 10.8 and later. Please use -[NSImage drawAtPoint:fromRect:operation:fraction:] instead.
Sep 6 01:47:00 Matthews-MacBook-Pro-4.local WebProcess[1474]: *** WARNING: -[NSImage compositeToPoint:operation:] is deprecated in MacOSX 10.8 and later. Please use -[NSImage drawAtPoint:fromRect:operation:fraction:] instead.
Sep 6 01:47:00 Matthews-MacBook-Pro-4.local WebProcess[1474]: *** WARNING: -[NSImage compositeToPoint:fromRect:operation:] is deprecated in MacOSX 10.8 and later. Please use -[NSImage drawAtPoint:fromRect:operation:fraction:] instead.
Sep 6 01:47:04 Matthews-MacBook-Pro-4 com.apple.launchd[1] (com.daz3d.content_management_service): Throttling respawn: Will start in 10 seconds
Sep 6 01:47:34 --- last message repeated 2 times ---
Sep 6 01:47:34 Matthews-MacBook-Pro-4 com.apple.launchd[1] (com.daz3d.content_management_service): Throttling respawn: Will start in 10 seconds
Sep 6 01:48:04 --- last message repeated 2 times ---
Sep 6 01:48:04 Matthews-MacBook-Pro-4 com.apple.launchd[1] (com.daz3d.content_management_service): Throttling respawn: Will start in 10 seconds
Sep 6 01:48:34 --- last message repeated 2 times ---
Sep 6 01:48:34 Matthews-MacBook-Pro-4 com.apple.launchd[1] (com.daz3d.content_management_service): Throttling respawn: Will start in 10 seconds
Sep 6 01:49:04 --- last message repeated 2 times ---
Sep 6 01:49:04 Matthews-MacBook-Pro-4 com.apple.launchd[1] (com.daz3d.content_management_service): Throttling respawn: Will start in 10 seconds
Sep 6 01:49:30 --- last message repeated 2 times ---
Sep 6 01:49:30 Matthews-MacBook-Pro-4.local Dock[197]: Unable to open IOHIDSystem (e00002bd)
Sep 6 01:49:30 Matthews-MacBook-Pro-4 kernel[0]: virtual bool IOHIDEventSystemUserClient::initWithTask(task_t, void *, UInt32): Client task not privileged to open IOHIDSystem for mapping memory (e00002c1)
Sep 6 01:49:30 Matthews-MacBook-Pro-4.local Dock[197]: CGSSetWindowTransformAtPlacement: Singular matrix [inf 0.000 0.000 inf]
Sep 6 01:49:31 Matthews-MacBook-Pro-4.local usernoted[220]: Cannot find originating application to launch for event action. file://localhost/Applications/Postbox.app/ is not the same app as the one that sent the original notification.
Sep 6 01:49:31 Matthews-MacBook-Pro-4.local usernoted[220]: Error finding application com.postbox-inc.postbox.
Sep 6 01:49:34 Matthews-MacBook-Pro-4.local DashboardClient[2154]: *** WARNING: -[NSImage compositeToPoint:operation:] is deprecated in MacOSX 10.8 and later. Please use -[NSImage drawAtPoint:fromRect:operation:fraction:] instead.
Sep 6 01:49:34 Matthews-MacBook-Pro-4.local DashboardClient[2154]: *** WARNING: -[NSImage compositeToPoint:fromRect:operation:] is deprecated in MacOSX 10.8 and later. Please use -[NSImage drawAtPoint:fromRect:operation:fraction:] instead.
Sep 6 01:49:35 Matthews-MacBook-Pro-4 com.apple.launchd[1] (com.daz3d.content_management_service): Throttling respawn: Will start in 10 seconds
Sep 6 01:49:46 --- last message repeated 1 time ---
Sep 6 01:49:46 Matthews-MacBook-Pro-4.local Google Chrome Helper[2162]: Unsure about the internals of CFAllocator but going to patch them anyway. If there is a crash inside of CFAllocatorAllocate, please report it at http://crbug.com/117476 . If there is a crash and it is NOT inside of CFAllocatorAllocate, it is NOT RELATED. DO NOT REPORT IT THERE but rather FILE A NEW BUG.
Sep 6 01:49:48 Matthews-MacBook-Pro-4.local WindowServer[86]: CGXSetWindowListTags: Modification of (unknown tag) (45) on a window 0x17 requiring rights kCGSWindowRightOwner by caller Dashboard
Sep 6 01:49:49 Matthews-MacBook-Pro-4.local Google Chrome Helper[2162]: CGSLookupServerRootPort: Failed to look up the port for "com.apple.windowserver.active" (1100)
Sep 6 01:49:55 Matthews-MacBook-Pro-4 com.apple.launchd[1] (com.daz3d.content_management_service): Throttling respawn: Will start in 10 seconds
Sep 6 01:50:10 --- last message repeated 1 time ---
Sep 6 01:50:10 Matthews-MacBook-Pro-4.local WindowServer[86]: CGXSetWindowListTags: Modification of (unknown tag) (45) on a window 0x13 requiring rights kCGSWindowRightOwner by caller Dashboard
Sep 6 01:50:10 Matthews-MacBook-Pro-4.local WindowServer[86]: CGXSetWindowListTags: Modification of (unknown tag) (45) on a window 0x15 requiring rights kCGSWindowRightOwner by caller Dashboard
Sep 6 01:50:15 Matthews-MacBook-Pro-4 com.apple.launchd[1] (com.daz3d.content_management_service): Throttling respawn: Will start in 10 seconds
Sep 6 01:50:32 --- last message repeated 1 time ---
Sep 6 01:50:32 Matthews-MacBook-Pro-4.local CalendarAgent[997]: [com.apple.calendar.store.log.caldav.queue] [Account refresh failed with error: Error Domain=CoreDAVHTTPStatusErrorDomain Code=401 "The operation couldn’t be completed. (CoreDAVHTTPStatusErrorDomain error 401.)" UserInfo=0x7fdf6981ad60 {AccountName=Google, CalDAVErrFromRefresh=YES, CoreDAVHTTPHeaders=<CFBasicHash 0x7fdf6e807840 [0x7fff7579c190]>{type = immutable dict, count = 10,
entries =>
0 : Case Insensitive Key: X-Content-Type-Options = <CFString 0x7fdf6e806420 [0x7fff7579c190]>{contents = "nosniff"}
1 : Case Insensitive Key: Content-Type = <CFString 0x7fdf6e807780 [0x7fff7579c190]>{contents = "text/html; charset=UTF-8"}
2 : Case Insensitive Key: Server = <CFString 0x7fdf6e801460 [0x7fff7579c190]>{contents = "GSE"}
3 : Case Insensitive Key: Transfer-Encoding = <CFString 0x7fff74a546b8 [0x7fff7579c190]>{contents = "Identity"}
6 : Case Insensitive Key: Date = <CFString 0x7fdf6e8077b0 [0x7fff7579c190]>{contents = "Thu, 06 Sep 2012 08:49:54 GMT"}
7 : Case Insensitive Key: X-Frame-Options = <CFString 0x7fdf6e801320 [0x7fff7579c190]>{contents = "SAMEORIGIN"}
8 : Case Insensitive Key: X-XSS-Protection = <CFString 0x7fdf6e801440 [0x7fff7579c190]>{contents = "1; mode=block"}
9 : Case Insensitive Key: Www-Authenticate = <CFString 0x7fdf6e807750 [0x7fff7579c190]>{contents = "BASIC realm="Google CalDAV""}
11 : Case Insensitive Key: Cache-Control = <CFString 0x7fdf6e807810 [0x7fff7579c190]>{contents = "private, max-age=0"}
12 : Case Insensitive Key: Expires = <CFString 0x7fdf6e8077e0 [0x7fff7579c190]>{contents = "Thu, 06 Sep 2012 08:49:54 GMT"}
Sep 6 01:50:35 Matthews-MacBook-Pro-4 com.apple.launchd[1] (com.daz3d.content_management_service): Throttling respawn: Will start in 10 seconds
Sep 6 01:51:05 --- last message repeated 2 times ---
Sep 6 01:51:05 Matthews-MacBook-Pro-4 com.apple.launchd[1] (com.daz3d.content_management_service): Throttling respawn: Will start in 10 seconds
Below is the EtreSoft Analysis:
Hardware Information:
MacBook Pro - model: MacBookPro8,3
1 2.4 GHz Intel Core i7 CPU: 4 cores
4 GB RAM
Startup Items:
Cocktail - Path: /Library/StartupItems/Cocktail
EyeConnect - Path: /Library/StartupItems/EyeConnect
System Software:
OS X 10.8.1 (12B19) - Uptime: 0 days 0:50
Disk Information:
TOSHIBA MK7559GSXF disk0 : (750.16 GB)
disk0s1 (disk0s1) <not mounted>: 209.7 MB
disk0s2 (disk0s2) <not mounted>: 749.16 GB
Recovery HD (disk0s3) <not mounted>: 650 MB
MATSHITADVD-R UJ-8A8
USB Information:
Apple Inc. FaceTime HD Camera (Built-in)
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
PNY Technologies USB 2.0 FD 32.08 GB
disk2s1 (disk2s1) <not mounted>: 209.7 MBI'm having the same issue - started a few months ago and had to forcibly shut down the Mac. That killed the hard drive, so I got a new hard drive and had the Apple Store install Lion on it, then used Migration Assistant to bring files over. Since then I've upgraded to Mountain Lion and have been experiencing lots of beach balls, freezes, etc. They're so bad that I've had to forcibly shut down 3 times, and each time can't restart. Each time I've erased and done a clean install of Mountain Lion from a USB, then used migration assistant and time machine to bring files back. Just did this last night and am still getting tons of beach balls and freezes. Help please! Here's what Etresoft says.
Hardware Information:
MacBook Pro - model: MacBookPro8,1
1 2.3 GHz Intel Core i5 CPU: 2 cores
4 GB RAM
Video Information:
Intel HD Graphics 3000 - VRAM: 384 MB
Startup Items:
CiscoVPN - Path: /System/Library/StartupItems/CiscoVPN
Parallels - Path: /Library/StartupItems/Parallels
System Software:
OS X 10.8.3 (12D78) - Uptime: 0 days 1:25
Disk Information:
WDC WD5000BPVT-00HXZT3 disk0 : (500.11 GB)
disk0s1 (disk0s1) <not mounted>: 209.7 MB
V (disk0s2) /: 499.25 GB (294.67 GB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
MATSHITADVD-R UJ-8A8
USB Information:
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. FaceTime HD Camera (Built-in)
Apple Computer, Inc. IR Receiver
FireWire Information:
Kernel Extensions:
Problem System Launch Daemons:
Problem System Launch Agents:
[failed] com.apple.accountsd.plist
[failed] com.apple.mrt.uiagent.plist
Launch Daemons:
[loaded] com.adobe.fpsaud.plist
[loaded] com.backblaze.bzserv.plist
[loaded] com.google.keystone.daemon.plist
[loaded] com.microsoft.office.licensing.helper.plist
Launch Agents:
[loaded] com.google.keystone.agent.plist
[loaded] com.puredigitaltechnologies.FlipShare.AutoRun.plist
[loaded] jp.co.canon.CUPSCMFP.BG.plist
[failed] jp.co.canon.CUPSPS2.BG.plist
[loaded] jp.co.canon.UFR2.BG.plist
User Launch Agents:
[loaded] com.adobe.ARM.202f4087f2bbde52e3ac2df389f53a4f123223c9cc56a8fd83a6f7ae.plist
[failed] com.apple.CSConfigDotMacCert-paul.graham...plist
[loaded] com.backblaze.bzbmenu.plist
[failed] com.facebook.videochat.paulburke.plist
[loaded] com.microsoft.LaunchAgent.SyncServicesAgent.plist
User Login Items:
Microsoft Database Daemon
iTunesHelper
Dropbox
3rd Party Preference Panes:
Backblaze Backup
Flash Player
Internet Plug-ins:
AdobePDFViewer.plugin
AdobePDFViewerNPAPI.plugin
Flip4Mac WMV Plugin.plugin
DivXBrowserPlugin.plugin
Flash Player.plugin
FlashPlayer-10.6.plugin
googletalkbrowserplugin.plugin
iPhotoPhotocast.plugin
JavaAppletPlugin.plugin
npg.plugin
npgtpo3dautoplugin.plugin
o1dbrowserplugin.plugin
OfficeLiveBrowserPlugin.plugin
QuickTime Plugin.plugin
RealPlayer Plugin.plugin
SharePointBrowserPlugin.plugin
Silverlight.plugin
User Internet Plug-ins:
WebEx64.plugin
Bad Fonts:
None
Top Processes by CPU:
27% mds
3% WindowServer
2% EtreCheck
2% Skype
2% hidd
1% bztransmit
1% fontd
1% WebProcess
0% Console
0% mtmfs
Top Processes by Memory:
496 MB Mail
283 MB WebProcess
229 MB bztransmit
202 MB mds
164 MB Safari
139 MB Skype
66 MB SyncServicesAgent
57 MB WindowServer
53 MB Finder
41 MB PluginProcess -
LOTS of Memory problems on new 8 core
I just moved from my totally stable G5 running Logic Pro8 on Tiger to my new Mac Pro 8 core. I am having nothing but problems with
low memory issues. Everything is up to date and it doesn't seem to matter if I'm in 32 or 64 bit, running reason in Rewire or not. I am having
trouble narrowing down the problem. It seems to be random. I have seen a lot of posts about this but no real solutions. I'm thinking I got
a bad computer. it's 2 months old. This computer has 6 gig of RAM. I have talked with lots of friends running the same systems with
no problems. What is the latest? I have been on the phone with Apple and Sweetwater and it's all vague. A couple examples and as you can see I don't have
that much going yet. WAY less than I could run on my G5. I have also been unable to get a second monitor to work with the mini display to DVI connector
but it did work with mini display to VGA on the same monitor which is weird, and it seemed slow.
(Mac Pro 8 Core Snow Leopard 10.6.8 - Logic Pro9 9.1.5 - Reason5 (tried 6 for 64 bit as well) - APOGEE Ensemble - Omnisphere, Stylus, KONTACT4,
East West Play, Superior Drums, UAD 2 and others)OK. Here is a perfect example of what I am dealing with. I have a song open with a movie because I am scoring today (I never had trouble on my G5 importing and workin with movies and dialogue tracks). I have Reason open
with one of the Reason5 Bass sounds, which takes alot of memory but again never an issue on my G5. I have TWO audio tracks with no plug-ins. Superior Drums, one kit. 1 ESX with a simple cymbal swell sound. I try and load a pad in Omnisphere and I get the below message. If I turn the bass into audio and quit Reason5 it will let
me load the omnisphere sound, so I'm wondering how much of this is a Reason/ Rewire issue. Again never had
trouble with this on G5, Tiger, Reason4 and Logic8. I am running at 32 bit because Reason5 is not 64 bit. Reason6 is 64 bit and even though I don't like the new interface I will pruchase it and run at 64 bit if it will
work. Again I keep hearing different things about 64 bit and 32 bit. I'm trying both and I don't see any
consistent change, still weird and random memory issues.
Maybe you are looking for
-
IDCS4 preflight errors regarding resolution in .eps files from Illustrator
We have been having real problems with some (but not all) .eps files (both supplied and created in-house) in IDCS4. When viewed in Illustrator, the images are fine, but after the images have been imported into IDCS4, the problems begin. There is noth
-
OK, how can I say this.... You know I needed an internet connection and I did not want to have to use a "phone's" keypad because I have fat fingers. So, I got a USB thing from Sierra Wireless and signed up with ATT (big mistake but anyway) for intern
-
Creating Web Service from R/3 system in Web AS
I'm trying to find out how to create a Web Service from a BAPI running on an R/3 System and have the Web Service hosted on Web AS. Is there anything in the SAP Developer Studio which facilitates this. I've looked into the enterprise connectivity pe
-
Problem finding current iTunes library
When I opened iTunes today it wouldn't open my current library but instead asked for me to choose a library to open. The only ones available are the previous iTunes libraries the most recent of which is from a month ago since which I had added more m
-
Looking for Photo Shop and Illustrater Product
Dear Sir, we are looking for Photoshop and Illustrater product for my small business running personally on yearly Basis, please sugeest me which one is better for me. Thanking you