0404 and Vista RC1 anyo

Has anybody managed to get EMU 0404 working on Vista RC (Build 5600)?
Help would be greatly appreciated!

Try this:
Here's what I found to work for me with the Audigy Platinum II EX.
.) Download and install the XP drivers -- DO NOT RESTART. You may notice that you have sound already. Don't bother to try to use the Audio Console or other sound utilities -- they may hang or crash the system or drivers.
2.) Without rebooting, install the latest Soundblaster drivers (Beta for Vista) from Creative. Reboot this time.
3.) When the machine restarts, don't be in a hurry. It appears that Vista is busy updating protected storage and swapping out drivers. This took about 20 minutes on my 3.2 GHz hyperthreaded processor. Go ahead and do something else while it's cooking.
4.) When things settle down (processor activity slows and disk activity slows) open the Audio Console (Creative) and adjust the settings for 5., 6., or stereo to match your system.
Bingo!!!
The moral of the story is that the Creative Beta install is expecting some evidence of the sound card before it will replace the drivers and that Vista takes a long time to establish all the drivers for the AV links after Creative Install completes. Hope this works for you. I spent 3 days on it.

Similar Messages

Mac Pro 6 GB, Parallels 1910 and Vista RC1

Hi all,
My 15 days trial expired yesterday so I couldn't try 1908, I've tried the first day two weeks ago and it was not working.
So I'd like to know if somebody installed this config : Mac Pro 6 GB, 1910 and Vista RC1, since to test it I have to buy it, I will if it works.
Thanks,
Peloche,

I've installed Vista RC1 5728 32 bits, installation was fine.
I can't make the network to work, Vista doesn't find any network adapter altought Parallels is emulating Bridged Ethernet at en0: Ethernet Adapter Type Reaktek 8029(AS).
http://peloche.smugmug.com/photos/97790991-O.jpg
I believe that if I could access to Internet I'll be able to install NVidia 7300 GT driver and get a good resolution ?
Thanks,
Peloche
MacPro 2.66, 6GB, 1TB; Mini G4, 1.45, 1GB; iPod 60 GB; 30" & 20" ACD; Apple IIC Mac OS X (10.4.7)

K8N Diamond Plus' Audio drivers 4 Vista RC1???

Guys i need to find drivers for RC1 Vista for my built in Mother board creative Audigy SE on K8N Diamond Plus. Can any one help me where to find these drivers????????

well i installed the vista RC1 and downloaded the Audigy Se's vista RC1 drivers from creative's web site and i installed it on my system and it detected my motherboard's audigy SE as audigy live 24 bit but there was no sound so i updated the driver and i gave the path of my window's xp driver and it worked for windows vista RC1. and my sound card is now dectected as audigy SE not live 24 bit. thanks to msi for making a driver which works with both xp and vista RC1. i ll try to install the Xp's driver directly on Vista with setup.exe, and will see if this will give me all the sound configrations which we do see in windows xp. But i still request MSi to provide us good vista drivers.
I have one question,
CAN WE INSTALL AUDIGY SE's DRIVERS DOWNLOADED FROM WWW.CREATIVE.COM FOR AUDIGY SE BUILT IN SOUND CARD OF DIAMOND PLUS MOTHERBOARD(FOR WINDOWS XP) ?

IPod Mini and Windows Vista RC1

Ok, so I connect my mini to my Vista RC1 machine (FULL PC, not BootCamp), then went to bed. A few minutes later, the mini's screen lights up like I just connected it to the machine, then the main ipod folder opens up like it was set to hard-drive mode. For some reason, the iPod keeps reconnecting to the computer. I can't figure out how to stop it. Any help would be appreciated.

Hello pc1971,
And welcome to Apple Discussions!
Have you tried some of the basics such as plugging it into different USB ports on your computer or try a different USB Connector Cable?
Maybe try resetting the device with it connected to your system. To do this, toggle the hold switch on and off, and then press and hold the Menu and Select (Center) buttons together for a few seconds until the Apple logo appears.
Otherwise, I would continue working through the recommend troubleshooting steps provided in this Apple support document.
http://support.apple.com/kb/TS1369
B-rock

Vista RC1 and itunes authorizations

Has anyone else upgraded to Vista RC1? I just did yesterday, and now whenever I try to play a song I bought on itunes, it asks me to authorize this computer. I enter in my password and it tells me that the computer has been authorized, but when I go to play the file it tells me I am not activated again. The cycle doesn't end.
Any suggestions?

I have the exact same problem. All Apple Support will do is suggest I unistall and re-install iTunes. I have done so three times and even taken off all my music and it still won't work.
I am hoping some future build will resolve it. In the meantime, I am not using iTunes.
Tom in Ohio

Windows Vista RC1 x64 and Audi

Anyone gotten their Audigy2 to work under this version? If so, please share what you did to get it to a state where you have sound. I've been installing/uninstalling and reinstalling for two days now, but I have NO sound.
Oddly enough... the game port on the card gets installed fine.

I've got the Audigy Platinum on a 64bit install, I've managed to get the drivers to install and vista to like them, but I can't actually hear anything. Yet the volume levels in vista do move, so sound is being produced, just not so I can hear it...

WIndows Vista RC1 (No Drivers)

Well, hey there.
I've just installed Windows Vista RC1 (March 2009). It's pretty recent.
I went ahead and installed my Boot Camp drivers, but lo and behold nothing installed. I figured it was a botched installation, formatted that partition, and started again.
So, I have tried once again and I am having all kinds of problems. For some reason I can't change the brightness of my monitor or keyboard (both are max all the time) and much of my hardware is not recognized. (By 'much' I mean 'all'. I manually installed a wireless driver.)
Vista installs smoothly, I go about installing the BootCamp drivers and the installation window itself says it's installing each component, but the device manager isn't changing at all. Everything remains "Generic" & "Unrecognized".
I just want Vista to play some games so I can blow off some steam & to do some 3ds Max stuff for college.
Why is this simple process of installation so difficult?
This Apple business is becoming very stressful very quickly.
What I want is some regular old drivers for my stuff to work, there's nothing unique about the hardware so why is it so awkward and frustrating & difficult to get drivers? At best, can someone maybe tell me what kinds of hardware would be in the late 2008 MacBook Pro & how do I get my brightness adjustments to work?
And also, why don't Apple just have individual drivers for download: Nearly every other manufacturer & vendor does (Dell, HP, Sony, Lenovo, Acer, etc.. They use third party hardware and drivers too).

I don't have a MacBook series, and in the folder "Apple" are drivers for various devices.
Try to install directly. If not try using Device Manager to update.
And try running system file checker just for good measure
*sfc /scannow*
and follow that up with hardware check of your boot partition (schedule chkdsk).
Whether you can install Nvidia drivers manually or not, that would help.
And DO create system restore points and backups.

Satellite M35X-S111: Cannot install W2k and Vista

Greetings! Today I have tried to install windows 2000 on my notebook m35x-s111 but my attempts have not crowned success. After copying initial drivers there was "Blue Screen" speaking about that it is necessary to disable Bios shadow and Video Shadow. In BIOS such options are not present, there in general anything is not present from adjustments.
Today has tried to install Windows Vista RC1 but result that screen and the message on that what not full ACPI (is incompatible). I understand, that it is necessary to disable all these options and then the system will be install but how to do it???

Hi,
Whats for error Code becomes you by the Installation from Win 2000 in the last line by the Blue Screen?
Is this a official Version? Or a OEM Version?
Vista Installation
You becomes not for all Hardware Drivers for Vista.
Please Check the Hardware Premises of the Microsoft Site.
http://www.microsoft.com/technet/windowsvista/evaluate/hardware/vistarpc.mspx
http://www.microsoft.com/technet/windowsvista/relperf/default.mspx
http://www.microsoft.com/technet/windowsvista/evaluate/feat/relperf.mspx
Fact is that vista is not official on the market and till then it is not officially supported by Toshiba.
Bye

Qosmio G20-127: Hotkeys & Fn buttons don't work with Vista RC1

This problem is really annoying me. Neither the Hotkeys(play, pause, forward, record, brightness) nor the Fn Buttons work since I installed windows vista RC1.
I need to find a solution for this issue. If anyone has experienced it please provide me with feedback.
Also the ConfigFree seems to be incompatible with Windows Vista, if anyone knows a trick or two I'd be most thankful

Hi Shaker
There is no trick or two!
Do you know that the Windows Vista RC1 is not an official end version and the RC1 version contains about 1500 bugs!
Furthermore to use the Toshiba features like the FN buttons or the hotkeys you will need the Toshiba drivers. BUT you will not find any Toshiba drivers for the Windows Vista at this time.
Why? Because the Windows Vista is not official on the market. Therefore if you want to use the Vista at this time on your notebook you have to use it without the Toshiba options.
But Im sure that you will get the Toshiba drivers if the Windows Vista was fully developed and official to buy.

Windows Vista RC1 + iTunes 7

Hey,
I was just wondering if anyone knows what i can do with my iTunes. Here's my problem...
I'm using Microsoft Windows Vista RC1 x64. I've installed iTunes and I can use the iPod as an external storage device, as I always could with Windows XP Pro SP2. However, when I add music to the iTunes (from such as a CD that are stored in my Music folder), it "looks" as if it's uploading the song but it isn't.
I have the iPod as manual update, so i drag a track over, and it has the progress bar at the top centre saying "updating ipod, do not disconnect" so that's all well. But once that's finished updating, if i try and search for the track on either iTunes or my iPod, it's nowhere to be seen!
Does anyone have any ideas as to how i could solve this situaion or anything? (Other than restoring my iPod). I just want to really know if iTunes and iPod works with Windows Vista RC1 as i know there are some glitches in some programs running on Vista.
Thanks,
Chris.

Ok, uninstalled 7.0, put back 6.0! if anyone has same problem, or any problems with their ipod and itunes and is using 7.0 for god sake use 6.0!! 7.0 is poo! If you can't get access to 6.0, email me: [email protected] ill happily help you out.

ITunes and Vista RTM

Ever since I installed ITunes 7.02, I have been unable to sync my iPods with any of my Vista PCs. On different machines I was running RC1, RC2, and even build 5780 which was post RC2. Today I installed the final release version and still can't get the PCs to talk to my iPods correctly. Either iTunes does not see them at all (Windows does) OR if they are visible in iTunes you get all kinds of random errors when trying to sync.
Are others having this problem? Are there any known workarounds? I tried Vista compatibility mode but it did not work either. Vista has been around long enough you would think Apple would have this working by now.
Other OS
Other OS

For what it is worth, I second that;
Vista's "final release" does NOT work with 7.02...
In fact it will reboot your machine randomly without warning and Vista will not "catch" the problem...(no blue screen etc - just instant reboot/bios screen).
Phredd
iMac G5 Mac OS X (10.4.8)
PowerBook 12 1.33 / 512M / SD

K8N Diamond Plus & Vista RC1

Upgraded from XP sp2 to MS Vista RC1 - upgrade seemed to go smooth. Only real issue at this point is with the on-board audio. It appears that it only sees two channels - additionally the audio for the tv tuner card is not working as well. Went to the Sound Blaster site - tried their Vista beta drivers - at which point Vista could not detect any sound card. I have not been able to find any Vista drivers for the mobo on the MSI site. Is anyone else testing Vista out on this mobo?

I should update my signature. Because of the fan noise on the GT7900's - I replaced them with Zalman fans - which take up more real estate and I was no longer able to get the X-Fi card to fit in the remaining pci slot. So I dumped the X-Fi card and went with the on-board audio. I have tried several different drivers from Creative - I can now get the card to work albeit - only with 2-channels. When I try to configure it - my only options are either 1 or 2 channels so I think its driver related. I am thinking of trying a low profile sound card -which I think will fit even with the Zalman fans however, the only low profile sound cards I've been able to find so far have been on the cheap side. The one plus with going with a low profile card is getting a game port - which the on-board audio does not have.

Windows XP Pro (32-bit) and Vista Ultimate (64-bit) on the same Mac Pro HD?

Has anyone been able to install both Windows XP Pro (32-bit) and Windows Vista Ultimate (64-bit) on the same dedicated Windows hard drive? I have four HD in my Mac Pro, and one of them is dedicated for Windows (and bootable via Boot Camp). I found the following technical articles about installing Windows XP & Vista on the same hard drive (using two separate partitions) using a VMWare machine as the test system:
http://apcmag.com/howto_dual_boot_vista_and_xp_with_vista_installed_first__the_stepbystepguide.htm
http://apcmag.com/howto_dualboot_vista_with_xp__stepbystep_guide_withscreenshots.htm
Has anyone successfully installed Windows XP (32-bit) and Vista 64-bit) on the same NTFS partition?
I already have Windows XP Pro (32-bit) SP3 installed on my single NTFS hard drive. I am looking for the best way to add the Vista 64-bit installation on the same hard drive.
Any thoughts and advise are appreciated.

Windows has its own list of boot OSs, and default, from msconfig. It will sit and wait for xx-seconds on startup in Windows if you want to boot from an alternate.
As to whether Apple's OS Switcher (aka startup disk bootcamp control panel or tray icon) sees both, I had Windows Home Premium and Ultimate 64, and pretty sure OS X saw both. That was pre-Leopard and before there were 64-bit Apple drivers.
I can't think of any scenerio of wanting to mix 32-bit and 64-bit on the same paritition, you realize you can't install the one over the other and must do a clean install.
When I added a partition out of main partition (I wanted to put search index and page file on their own partition) those partitions aren't seen - are hidden - to Leopard.

Problem with standby and Vista

Hi!
I've a problem with my X61 with the Turbo Memory and Vista x64: When I install the driver for Turbo Memory, I cannot resume from standby. The notebook does only a "normal" reboot.
Can anybody help me with this problem?
scw

well after a lengthy talk with many microsoft reps i found something. I was an updated version of this "WUDfrd.sys" file. But the problem was that i could not see a download link. but after a little while i convinced microsoft to give it to me. at first it looked like it had potential but after i restarted, every went down the plug hole. here is the link that i was talking about.
http://support.microsoft.com/kb/933607/en-us
problem still not solved and not looking to be solved for a long time by the looks of things.... NOT HAPPY JAN!!!

Firefox mage quality and resolution was superb when I used XP and Vista. Now that I have Windows 7, however (with the Firefox 3.6.3 version), the image quality and resolution is poor. Please help me!

I am using the Firefox 3.6.3 version with my new Windows 7 operating system. When I used all the previous Firefox versions in my XP and Vista operating systems, image quality and resolution was excellent! However, now that I have upgraded to Windows 7 and Firefox 3.6.3, the image quality and resolution is poor (unacceptable for downloading purposes).
== This happened ==
Every time Firefox opened
== I first activated my new computer and installed the Firefox 3.6.3.

All my images are pixelated in firefox 3.6.3
http://www.dcgdcreative.com
Not only on my site but on most sites I view.
The issue is not solved by resetting the zoom text view (ctrl+0)
The issue is not resolved by starting in safemode with add-ons disabled
The problem seems to only affect .jpeg files and only on Windows 7 on my desktop; as I have viewed several sites using windows XP with my laptop, no issues.
I had the same issue with IE8 and was able to fix the problem with by setting up the compatibility view for all sites. Issue fixed no problems at all. But nothing similar for firefox?
Whats the deal?

0404 and Vista RC1 anyo

Similar Messages

Maybe you are looking for