04s WAD: Cannot see assigned roles and web templates

Hi,
when i log into the 04s WAD, i am unable to see the roles that are assinged to my id as well as teh templates assigned to those roles. using the "find" function does not return web templates that i should be able to see. I am able to see the roles & web templates when logging in through the 3.x WAD.
We are on SP11. any suggestions are appreciated. Thanks!

Hi,
You should migrate your 3.x WAD to see them with the new WAD.
-> Tool -> migrate.
You can see the old WAD with the 3.X WAD.
hope it help's

Similar Messages

So Can I determine the business partners linked to user based on the assigned role and org. structure?

Hello, I am working on a SAP CRM 7 Sales implementation and we are implementing leads and opportunity scenarios. The current business organization model is that there multiple vertical and horizontal departments. This is typical matrix structure. This organization has done the segregation of its clients based on the verticals so every clients belongs to at least one or more Vertical department but Horizontal departments can contact all the clients. In the same way sales executives are also either belonging to one or more Verticals or Horizontal departments? Horizontal sales executive can create leads for any clients available in the system but a Vertical sales executive can only create lead only for the client belongs to his vertical and assigned to him. This can be achieved by creating organization structure and business partner relationship.
Now the problem statement is that few sales executives need work for both some Verticals and Horizontals at the same time. But requirement is that they should be able to do the both roles with single user id but multiple roles. So when sales executive is creating leads his vertical department, he should only be able to select clients assigned to his Vertical only but when he is creating lead for Horizontal department, he should be able to select any clients.
So Can I determine the business partners linked to user based on the assigned role and org. structure?
Please let me know if this is not clear also note we are only using CRM WebUI no SAP ePortal.
Thanks a lot your help in advance.
Regards
Sudesh Sharma

Thanks, Tahir
my problem has solved
Kind Regards,
Faisal

Hello. I recently updated numbers on my macbook pro. I like the auto completion feature (proposing te word as I type). With this new update, I cannot see this feature and it doesn't work automatically. Can I have any help on this issue ?

Hello. I recently updated numbers on my macbook pro. I like the auto completion feature (proposing te word as I type). With this new update, I cannot see this feature and it doesn't work automatically. Can I have any help on this issue ?

This is really unfortunate. I'm sorry that nothing works. I was going to mention holding down the power button and doing a force shutdown but you already did that. You might need to take it into the Apple store. I don't know if booting into safe mode would help. You would have to turn off the machine again, hit the start button and hold down the shift key after you hear the tone, but normally you would let go of the shift key when you see the apple logo and spining wheel. Maybe by holding down the shift key after you here the tone will cause the screen to come back on? The other option is to start up from the 'install disk' if your machine came with one. You would insert the disk, then shut down the computer, and hold down the C key right after hitting the start button.
Here's the link for the safeboot
http://support.apple.com/kb/HT1564?viewlocale=nl_nl

Query designer report and Web Templates

Dear All,
I have a very basic/stup doubt.
Are reports made through Bex Query Designer and Web Templates the same?
Actually there is a following requirement:-
"Navigate from a BW Web template to a PCUI application". I have a document related to it but it gives me step on how can i modify my web templates to achieve this functionality. But all my reports are made through query designer and it available to user through Web Dynpro portal.
So i just wanted to know is Web Template and Reports made through query designer the same? So that i can implement the changes in my report.
Thanks.

Hi Anup,
by using web templates we can use N number of data providers (Queries) for a single analysis view with various available options. - N number of Queries can be assigned to Web template to create a web report
but by using the Query designer ,you can create a single report which may not provide sufficient information to the client and the number of features are less compared to web template.
as you mentioned that you are using the web dynpro.
i think the web dynpro requires the web reports as an iview and ths iview can be created by using the Query designer and or web app designer.
so the most clear view can be given to client using the WAD reports

Authorization to query and web template in BI 3.5

Hello
I need to grant users athorizatio to the WEB template and its query. Query is based on Multiprovider.
Should I save query and WEB template to existing role and grant authorizaion to tis role or I also need to grant authorization to multicube and all cubes underneath?
Thanks

Hi,
You need to assign two objects for authorizing web templates and query..
S_RS_COMP AND S_RS_COMP1... in both these object you need to assign appropriate roles and activities.
S_RS_MPRO object to assign authorization to MP.
Regards,
Anup
Edited by: Anup Chaudhari on Dec 3, 2009 8:42 AM

Filters Query and Web Template

Dear All,
Many reports use filters in both the query and the web template. What
is the difference?
Regards,
KS

the filter used in query and web templates are same
there is no difference between filters used.
as webtemplate uses the same query as its data provider so it is going to run the same filters.
for e.g. if u have query x then if there are filters in it .
if u have webtemplate y , and u have to assign a data provider to webtemplate which is nothing but query itself....
so if u run webtemplate u will at the end execute query x only...
now wat is filter.
filter means it will filter out that data.
for e.g. if u created a variable for calendar month and u restrict it so that user can enter the calendar month value range when they execute query x....
then if u execute query x
then upon its execution the variable will pop u p and it will ask u to enter range of calendar months
lets say u enter 1/2007-12/2007
so u r query executes and it will only bring data for year 2007.
now if u wish to see the data of 2006 and try to restrict it in Context menu or Restric screen, then it will display as NO DATA.
this means it will filter the data for particular year.
so if u wish to see the data for all years
then dont create variable and dont restrict Calendar month
Instead bring calendar month in Free characteristics
so later u can run the query for different years.
i hope u understand

BEx Web Template (BTMP) and Web Template (TMPL)

Hi,
I found in BI7 Objects, there are BEx Web Template (BTMP) and Web Template (TMPL). what's the different between them? For the BEx Web Template (BTMP), i can find in Web Application designer.
But for Web Template (TMPL), I cannot find them in Web Application designer. How can I edit them?
for example, there is a standard Web Template (TMPL) 0tpli_0tct_mc01_q0111, where can I change it?
Many Thanks
Jonathan

hello,
TMPL is for 3.5 template and BTMP is for BI 7.0 templates. For opening 7.0 template you need to use BI 7.0 WAD not 3.5 WAD.
you can open the standard template 0tpli_0tct_mc01_q0111 in WAD and then do save as to save it custom template.
Then you can edit the custom template and make the changes.
Make sure that the std. template is installed correctly.
Regards,
Dhanya

FCP cannot see or add any master templates

For some unknown reason, my FCP cannot see or add any master templates even thou all of the master templates are there in the right directory. Can someone take me through the steps to correct this issue? I have FCP 6.0.6 and Motion 3.0.2
I appreciate any help I can get.

http://docs.info.apple.com/article.html?artnum=301852
Remove QuickTime receipts:
Go to /Library/Receipts/
Locate the QuickTime receipts files.
Select all QuickTime receipts that have version numbers as part of their names (but don't select the other QuickTime receipts). Here's an example of what they look like (you may have different receipts on your computer):
Drag the selected receipts to the Trash.
Download and install the latest version of QuickTime for Mac OS X.
After following these steps and restarting your computer, your DV device should interact with Final Cut as expected.

Query related to BEx query and web template migration

Hi,
We are upgrading our BW system from BW 3.5 to 7.3 and also planning to migrate the existing BEx 3.X queries and web templates to BEx 7.x version.
We have BEx queries and web templates published on enterprise portal in roles.
My query is that after we migrate BEx 3.5 queries and web templates to new version, do we need to re-publish these (migrated) queries and web templates on the portal or users will be able to access the reports without any issues.
or are there any post migration steps that we need to follow so that reports (with migrated version) are available to the end users through portal as before.
Thanks,
Tarun.

Hi,
We are upgrading our BW system from BW 3.5 to 7.3 and also planning to migrate the existing BEx 3.X queries and web templates to BEx 7.x version.
We have BEx queries and web templates published on enterprise portal in roles.
My query is that after we migrate BEx 3.5 queries and web templates to new version, do we need to re-publish these (migrated) queries and web templates on the portal or users will be able to access the reports without any issues.
or are there any post migration steps that we need to follow so that reports (with migrated version) are available to the end users through portal as before.
Thanks,
Tarun.

Migrating queires and web templates

Hi All
We have just upgraded our front end and are now thinking about converting/migrating the queries and web templates etc.
1: We havent done our dataflows yet as we will do these later. Does anyone know of any possible problmes of dojng the queries/templates but not the datalows?
2: Does anyone have a 'best way of doing the queires and templates...eg. what order?...All at once? ...One by One?
3: What are the tools to convert them all in one go for web templates and queries
Any other useful info would be helpful
Goawatson

Go though these links it would be of help.
Upgrading Bex Queries from BW3.5 to BI7
http://help.sap.com/saphelp_nw04s/helpdata/en/43/54e487c277321ae10000000a422035/frameset.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/43/54e487c277321ae10000000a422035/frameset.htm
Process of Migration
&#56256;&#56452; Save Query with SAP NetWeaver 7.0 BEx Query Designer
&#56256;&#56452; Query object itself will always get new version
&#56256;&#56452; Reusable Query components (structures, key figures, variables) will get
new version only if required

Variance Scaling in Query and Web Template Showing Different Results

Hi experts,
I have the following problem - variance scaling in my query and web template are showing different results.
My variance in column is set as follows:
Formula: NODIM(A % B)
Scaling Factor: 1
I have a structure in row that uses Scaling Factor of 1,000.
Let say the value of Column A is 120 and Column B is 100.
When I execute the query, it will show 0.02
However, when I execute the web template it will show the correct scaling i.e. 20.
May I know what can I do to correct above scaling error?
Thank you!

You can not remove the scalling factor, but once you check the checkbox below the dropdown menu, the scalling factor will go away.
I checked at my end and when I set the scalling fact as 1, I was getting 9.9% while I was expecting 9900%. When I removed the scalling factor I started getting 9900%.
I would let you know if I came across anything else.
What about the unit of Column A and B. Are they same or different?
- Danny
Edited by: Danny Matt on Jun 22, 2009 1:54 PM

IE error of query and web template

Hello experts,
We had completed the configuration of " Integration into Portal"
successfully.
Query and web template can execute successfully via "Execute" button.
After click "Execute" button, query or web template display the result
in IE.
And we can use right-click menu to do all of operation at beginning.
But after we click the right menu a few times, it will occure error.
The error information as follow:
Line : 8914
Char : 2
Error: 'initMenus[...].windowHeight' is null or not an object
Code : 0
URL : http://jt-
pldev.gnpjv.cgnpc.com.cn:50000/irj/servlet/prt/portal/prtroot/com.sap.ip.bi.web.portal.integration.launcher
Is there any solution? Thank you.
Best Regards,
Chen Jianguo

same here.
Internet Explorer 7, web templates or web analyzer:
1. open context menu with right mouse key
2. click on a free area outside the menu, to close the menu
3. opening the menu do not work anymore. buttons do not work anymore either.
searched notes, sdn, ... patched all to the newest level...
still the same error.

Cannot see data in SAP.Web.UI.Controls.Table

Hi,I have created a portal project and dragged a sap table into the design area. then i call a webservice and bind the resulting dataset to the table. the dataset seems to bind, since i can see there are the right number of pages in the table, but i cannot see any of the data. all the rows are blank. am i treating the ascx file correctly? i deploy and browse to test it.
this is the code in the aspx:
<%@ Register TagPrefix="sap" Namespace="SAP.Web.UI.Controls" Assembly="SAP.Web, Version=1.2.0.0, Culture=neutral, PublicKeyToken=50436dca5c7f7d23" %>
<%@ Control language="vb" Codebehind="PortalComponent1.ascx.vb" AutoEventWireup="false" Inherits="pdkdemo2.PortalComponent1" targetSchema="http://schemas.microsoft.com/intellisense/ie5" %>
<!%@ PortalComponent name="PortalComponent1" %>
<LINK href="C:\Program Files\SAP\SAP Portal Development Kit for .NET 1.0\Controls\ur\ur_design.css"
     type="text/css" rel="stylesheet">
<body class="prtlBody">
     <sap:Table id="Table1" runat="server">
          <sap:Caption Text="Table" ID="Caption2"></sap:Caption>
          <sap:TableRow ID="Table1_ItemTemplate">
               <sap:TableCell ID="TableCell4" Title="Column1">
                    <sap:TextView ID="TextView4"></sap:TextView>
               </sap:TableCell>
               <sap:TableCell ID="TableCell5" Title="Column2">
                    <sap:TextView ID="TextView5"></sap:TextView>
               </sap:TableCell>
               <sap:TableCell ID="TableCell6" Title="Column3">
                    <sap:TextView ID="TextView6"></sap:TextView>
               </sap:TableCell>
          </sap:TableRow>
     </sap:Table>
</body>
and this is the code behind:
Imports System
Imports System.Collections
Imports System.ComponentModel
Imports System.Data
Imports System.Drawing
Imports System.Web
Imports System.Web.UI
Imports SAP.Portal.Web.UI
Imports SAP.UI
Imports SAP.Web.UI.Controls
Public class PortalComponent1
    Inherits SAP.Portal.Web.UI.PortalComponent
    Protected WithEvents Table1 As SAP.Web.UI.Controls.Table
    Protected WithEvents Caption1 As SAP.Web.UI.Controls.Caption
    Protected WithEvents Table1_ItemTemplate As SAP.Web.UI.Controls.TableRow
    Protected WithEvents TableCell1 As SAP.Web.UI.Controls.TableCell
    Protected WithEvents TextView1 As SAP.Web.UI.Controls.TextView
    Protected WithEvents TableCell2 As SAP.Web.UI.Controls.TableCell
    Protected WithEvents TextView2 As SAP.Web.UI.Controls.TextView
    Protected WithEvents TableCell3 As SAP.Web.UI.Controls.TableCell
    Protected WithEvents Caption2 As SAP.Web.UI.Controls.Caption
    Protected WithEvents TableCell4 As SAP.Web.UI.Controls.TableCell
    Protected WithEvents TextView4 As SAP.Web.UI.Controls.TextView
    Protected WithEvents TableCell5 As SAP.Web.UI.Controls.TableCell
    Protected WithEvents TextView5 As SAP.Web.UI.Controls.TextView
    Protected WithEvents TableCell6 As SAP.Web.UI.Controls.TableCell
    Protected WithEvents TextView6 As SAP.Web.UI.Controls.TextView
    Protected WithEvents TextView3 As SAP.Web.UI.Controls.TextView
    Private Sub Page_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles MyBase.Load
        Dim proxy As New secblrnd.Service1
        Dim ds As DataSet
        ds = proxy.GetData("U020_EQUIP", "ALL", "NO", 0, "MOODLET1", "MOODLET1")
        Table1.DataSource = ds
        Table1.DataBind()
    End Sub
#Region "Web Form Designer generated code"
    Protected Overrides Sub OnInit(ByVal e As EventArgs)
        ' CODEGEN: This call is required by the ASP.NET Web Form Designer.
        InitializeComponent()
        MyBase.OnInit(e)
    End Sub
    ' Required method for Designer support - do not modify
    ' the contents of this method with the code editor.
    Private Sub InitializeComponent()
    End Sub
#End Region
End class
any assistance would be highly appreciated.

Hi,
The problem is that the SAP table doesn't support this kind of "dynamic binding" at the moment. The SAP table can contain any one of several controls in each cell, and these controls have several possible properties to bind to. So currently you have to "tell" the table what you want to bind to.
You have several options:
1. The easiest option, if you can create a typed dataset in design-time, according to what your webservice returns, then do that... and then put an instance of it on your portal component, and bind your table to that typed dataset (using the designer property grid). This should create a default ItemTemplate with all textViews in the cells, and the texts will be bound to the columns.
2. Write code in ItemCreated Event handler of the table. This event will be raised for each row in the DS. There you can tell the cells to get the data from the content. Remember that you'd have to create the cells according to the number of columns and set the content of each cell to be what control you want (like TextView) and then fill the properties of that control.
3. If you know the Data structure, but don't want to or can't create a typed DataSet - First define the columns using the designer (right click the table, select "edit columns"). Then in the event handler (from "2") just set the property "text" of each TextView which is in the content of each cell (use the Cell's property "TableCellContent" to get to the TextView control)
4. Don't use databinding and create the table contents completely manually (See here -
How to modify cells in a table?)
One last thing, here's a link to some more explanations about DataBinding in SAP controls:
https://media.sdn.sap.com/html/submitted_docs/PDK_for_dotNET_10/Programming%20with%20PDK%20for%20.NET/SAP%20NetWeaver%20.NET%20Controls/Data%20Binding/Complex%20Data%20Binding.htm
If you choose a solution and need more help, just ask.
Regards,
Ofer

How to assign a Bex Web template to a role?

Hi Guys,
How to assign a web template to a role? I have created a role from PFCG but i dont see this role when i open the Bex Web application designer to assign the role using the menu option
choose Web Template --> Publish --> In Role.
what needs to be done to make the role available under the above menu?

HI,
look into this....
http://help.sap.com/saphelp_nw04s/helpdata/en/43/8483a350b130f3e10000000a11466f/frameset.htm
Thanks

Cannot see Networked computers and problems with WEP sign in

I recently installed a new HD (SAMSUNG HM500LI) into my 2.16GHz MacbookPro running 10.5.5 and transferred all my files using Apple's Migration Assistant.
Everything seems to have been working fine until I tried to log in to a friend's wireless network using a WEP password. OSX gives me the error message "Commection Timeout". I can however connect to other unsecured wireless networks on the list.
I have tried deleting the keychain access for the WEP network and reentering the correct password, but no success.
What I have also realised is that I cannot see other macs on my Network in finder any more.
Another point worth mentioning is that the Parallels NAT and Guest in Network preferences (for Parallels virtualisation software) have now automatically been renamed to Ethernet... (en2) and (en3).
I still have my original harddrive in an external casing and booted from that and everything worked perfectly - I can both log onto the WEP wireless internet and see other macs in my vicinity.
Can anyone help me here please? Are there maybe some settings that weren't migrated with the assistant? Could it be that my file sharing settings need altering? Did I maybe not format the new drive correctly (I just erased the new one and formatted it in Mac OS Extended (Journaled))? Has a recent Apple update maybe upset something, and if so, is there a way to uninstall it?
Thank you in advance.
Robert
Message was edited by: Robbie1702
Message was edited by: Robbie1702

Hi Robbie, and a warm welcome to the forums!
Have you done any Maintenance since installing?
If not, at start with this...
Safe Boot , (holding Shift key down at bootup), use Disk Utility from there to Repair Permissions, move these files to the Desktop.
/Library/Preferences/SystemConfiguration/preferences.plist
/Users/YourUserName/Library/Preferences/com.apple.systempreferences.plist
/Library/Preferences/SystemConfiguration/com.apple.airport.preferences.plist
Then delete the orignals & reboot once more.
On the WEP PW, try putting a Dollar Sign in front of it, like...
$xxxxxxxxx
Also, is the WEP PW exactly 5 or 13 ASCII, or 10 or 26 HEX characters?

04s WAD: Cannot see assigned roles and web templates

Similar Messages

Maybe you are looking for