070302ex603 Formatting errors when posting via BD87 transaction

Hi experts,
When posting idocs manually via transaction BD87 all users receive "Formatting error in the field BSEG-WRBTR..." or "Formating error in the field BKPF-BUDAT..." regardless of personal user settings. When the same idoc is posted via scheduler it posts without any error. Can anybody help me out in this issue.
Points will be rewarded.
With thanks in advance
Saravanan

Hi
Go to T code ST22. here for the user id in which the dump is generated, click on how to rectify. The system will give you a probable resolution for the problem.  In many cases, there would be some key words, on which you need to serach for a suitable note of SAP to resolve the dump. Take the hlp of your ABAPER also
Thanks & Best Regards
Sanil K Bhandari

Similar Messages

  • Error when posting IDoc *** in system ERP100

    Hi Experts!
    Can you pls help me with a goods receipt issue?
    When user tries to make a good receipt on a PO, we have the msg "Error when posting IDoc *** in system ERP100" in SRM front-end application monitor.
    The same msg is getting displayed in RZ20.
    On the idoc itself in tcode WE02 however, I can't see any problem and unfortunately I have no access to the same t-code in R/3. Anyway, I don't see the GR on the PO.
    What can be the reason for this problem please?
    What is in general the way to analyse and solve this kind of issue?
    Thanks a lot !!
    imre

    Hi,
    First find out the PO number from the idoc in tx WE02 in SRM system. Then in ERP , transaction BD87 , specify the details like message type and the system information .... and find out the PO that was errored out for GR. From this we can find the cause of the error. First try to rectify the error and then run the report to clear the contents of  BBP_DOCUMENT_TAB.
    Hope this helps.
    Regards,
    Kalyan

  • Error when posting to profitabilty segments

    Dear All
    I get the following error when posting poriftabilty segment data in the accounting doument, if i try to enter the same characteristic value even to diffrent G/L Accounts.
    Data record already exists
    Message no. KE581
    Diagnosis
    This error should not occur.
    Procedure
    Contact your system administrator or SAP directly (component CO-PA-ACT).
    Has anyone come across this issue... ? Pls let me know how to resolve this?
    Thanks
    Gayani

    Hi,
    Please implement the latest version of the note 1321225 into your system in order to solve this problem!
    Afterwards please execute the function module RKE_GENERATE_INTERFACE_ACT in transaction SE37 for the operating concern you use - as described in note 1321225 under 'Solution'!
    Please enter function module RKE_GENERATE_INTERFACE_ACT in transaction SE37, press F8, enter your operating concern and press F8 again.
    Afterwards the described problem with error message KE581 should be solved.
    regards
    Waman

  • Error when posting a SOAP request

    Hi all,
    Facing error when posting the SOAP request and after entering the Server Username and password giving error that http not found and url
    The URL i follow is http://<hostname>:<port>/XISOAPAdapter/MessageServlet?version=7.0&channel=:BusinessSystem:PI_SOAP_CC
    can any one of you tell me in place of XISOAPAdapter what should i place?
    Please help me to post the SOAP request to PI server.
    Thanks in advance ,
    Manohar.

    Hi ,
    copy the same URL  (Endpoint that you had given while generating wsdl file) to the browser and chek the status. ( http://host:port/XISOAPAdapter/MessageServlet?channel=party:service:channel)
    See the below URL for the same i.e. SOAP adapter...http://help.sap.com/saphelp_nw04/helpdata/en/fc/5ad93f130f9215e10000000a155106/content.htm
    You should get response something like this '
    Message Servlet is in Status OK
    Status information:
    Servlet com.sap.aii.af.mp.soap.web.MessageServlet (Version $Id: //tc/aii/30_REL/src/_adapters/_soap/java/com/sap/aii/af/mp/soap/web/MessageServlet.java#15 $) bound to /MessageServlet
    Classname ModuleProcessor: null
    Lookupname for localModuleProcessorLookupName: localejbs/ModuleProcessorBean
    Lookupname for remoteModuleProcessorLookupName: null
    ModuleProcessorClass not instantiated
    ModuleProcessorLocal is Instance of com.sap.aii.af.mp.processor.ModuleProcessorLocalLocalObjectImpl0_0
    ModuleProcessorRemote not instantiated
    This  is make sure that webservice endpoint is given correctly. Don't forget to give username and password for connecting to XI server. user should xiappluser .
    Ranjeet Singh.

  • Error When Opening the Setup/Transactions/ Sources Window

    Hi All,
    in Oracle E-Business Suite R12 Version
    Error When Opening the Setup/Transactions/ Sources Window
    APP-FND-01388: Cannot read value for profile option FND_DEVELOPER_MODE in routine &ROUTINE.
    ORA-01403: no data found
    FRM-40735: WHEN-CREATE-RECORD trigger raised unhandled exception ORA-06502.

    Amr,
    Please see the suggested solutions in these docs.
    App-Fnd-01388: Cannot Read Value For Profile Option Fnd_developer_mode In Routine [ID 563884.1]
    R12: How To Avoid The Error Message APP-FND-01388 On Drilldown [ID 556668.1]
    R12 APXINWKB Error APP-FND-01388 When Trying To Query Invoice [ID 864195.1]
    APP-FND-01388 Cannot Read Profile Option FND_DEVELOPER_MODE In Benefits Service Center Form [ID 422182.1]
    Thanks,
    Hussein

  • Error when posting goods issue

    hi gurus,
    can anyone please help me with this error when posting goods issue to a free issue sales order " line item text is mandatory for vendor invoices".
    thanks in advance

    Dear Ysabella
    It seems the item texts is not maintained in the order which is made as mandatory.
    Go to sale order VA02, select that line item and click on "GotoItemTexts".  There maintain the relevant text and retry.
    thanks
    G. Lakshmipathi

  • "Bad image format" error when displaying an image on Nokia 6600

    I get a "bad image format" error when I try and display an image on a Nokia 6600 cellphone. The image displays correctly when I run it on the J2ME 2.1 Emulator, but gives an error on the phone. Plz help!!

    More info please... what kind of an image are you trying to display?

  • Error when posting the goods receipt

    Hi we have recently successfuly updated 4.6 B to ECC 6.0.But when i am doing captive consumption by 949 Mvt. through process message system gives an error that
    Error when posting the goods receipt
    Message no. CB345
    Diagnosis
    With the selected process message, a goods receipt for the order was reported to the warehouse (destination ZPI1).  However, an error occurred when the goods receipt was posted.
    Please do needful.
    Regards,
    PP

    Hi Daniel,
    This is the first time i am coming across an issue like this.
    neverthless from a logical front,
    1. Remove Cost center as a valid receiver in Settlement Profile.
    2. Your OKB9 setting are pretty much good. No need to worry about it.  Becasue, OKB9 only will work if the system doesn't identify any other cost object. In this case Production Order is an automatic cost object which system should have taken.
    3. Check the Settlement rule when you have created Production Order. It should have been MAT.
    4. I hope you are creating Production Order with Material (using CO01 and not CO07)
    5. Make sure in OPL8, the default rule in controlling tab is PP1.
    Once all these are fine, i do not see any reason why you will get your probelm.
    Please check and revert back to me if the problem still persists.
    Best Regards
    Surya

  • Unrecognized database format error when trying to access addin to Acrobat reader?

    I get an "Unrecognized database format" error when trying to access addin to Acrobat reader so I can use Pro to edit a pdf document?  What do I do so that teh ACCESS program aI am generating PDF's from uses Pro and not Reader?
    Thanks,
    Dan

    Adobe Reader and Acrobat Professional are 2 different products. Reader is for free and limited as to what it can do an support.
    Add-ins can only use features supported by Reader.
    You need Acrobat to edit PDF forms. Acrobat no longer supports access to SQL databases through Acrobat JavaScript.
    If you have an add-in and Acrobat can use it for filling a PDF form from Access, you need to talk to the developer to see if it can work with Reader.

  • Runtime Error when Posting Invoice with text added (MIRO)

    Hi Gurus,
    We are getting a shortdump (runtime error) when we post certain invoices in MIRO. This happens when we input some text in the text field or add some text to the NOTE tab.
    We are having exception ERROR_DP raised in the program c_textedit_control.
    If the text field is blank and nothing is writing in the NOTE tab, the invoice gets posted with no problem.
    Has anyone come accross this issue before and how did you solve it please.
    Thanks.

    are u processing thru BADI, then it is very easy there are interfaces and methods for handling texts. u sud not get any error and plz never write commit work in BADI.
    May be i cud provide more help if u share more details but let me tell more but let me share one recent development that i did.
    In ME59n when we do PR TO PO then texdts sud be copied to header text in PO and get reflected in PO. the coding is like below may be can give some clues wid ur MIRO stuff.
    METHOD if_ex_me_process_po_cust~process_header.
    *  Author        : Prasenjit Bist                                          *
    *  ID            : PRBIST                                                  *
    *  Date          : 04.08.2011                                              *
    *  Changes       : New Devlopment                                          *
    *  Change Request:                                                         *
    *  Description: To copy LSP information in PO                               *
    TYPES:
            BEGIN OF ty_text,
              auto_pr_po TYPE zman_auto_pr_po,
              plant TYPE zman_plant,
              vendor TYPE zman_vendor,
              lsp_vendor TYPE zman_lsp_name,
              contract_no_text TYPE zman_contract_no_text,
            END OF ty_text.
      TYPES:
           BEGIN OF ty_address,
             ort01      TYPE ort01_gp,  " city
             ort02      TYPE ort02_gp,  " district
             pfach      TYPE pfach,     " PO Box
             pstlz      TYPE pstlz,     " Postal code
             region     TYPE regio,     "Region (State, Province, County)
             telf1      TYPE telf1,     "1st telephone number
             telf2      TYPE telf2,     "2nd telephone number
             telfx      TYPE telfx,     "Fax number
             land1      TYPE land1,
           END OF ty_address.
      DATA:
       get the header level details
            ls_mepoheader TYPE mepoheader,
            lt_purchase_order_items TYPE purchase_order_items,
            ls_purchase_order_items LIKE LINE OF lt_purchase_order_items,
       get the line item details
            lt_mepoitem TYPE STANDARD TABLE OF mepoitem,
            ls_mepoitem TYPE mepoitem,
            lt_textlines TYPE mmpur_t_textlines,
            ls_textlines LIKE LINE OF lt_textlines,
    TEXT TYPES
            lt_texttypes TYPE mmpur_t_texttypes,
            ls_texttypes LIKE LINE OF lt_texttypes.
      DATA: l_name TYPE thead-tdname,
            ls_header TYPE thead,
            lt_lines TYPE STANDARD TABLE OF tline,
            ls_lines TYPE tline,
            l_tdobject TYPE thead-tdobject,
            l_metafield TYPE mmpur_metafield.
      DATA: ls_text TYPE ty_text,
            l_text(50).
      DATA: l_continue(1).
      DATA: l_pass_vendor TYPE lifnr,
            l_pass_plant TYPE werks,
            l_name1(35).
    fetch the address
      DATA: ls_address TYPE ty_address,
            l_landx    TYPE landx.
      CONSTANTS: lc_id TYPE thead-tdid     VALUE 'F01',
                 lc_langu TYPE thead-tdspras  VALUE 'E',
                 lc_object TYPE thead-tdobject VALUE 'EKKO'.
      CONSTANTS: lc_set(1) VALUE 'X',
                 lc_vendor(11) VALUE 'Vendor:    ',
                 lc_lsp_vendor(11) VALUE 'LSP Vendor:',
                 lc_contract_no_text(14) VALUE 'Contract Text:'.
      CLEAR: l_continue.
      IF sy-uname EQ 'PRBIST'.
    Read the header data
        ls_mepoheader = im_header->get_data( ).
    read teh item level data.
       break prbist.
        lt_purchase_order_items = im_header->get_items( ).
        LOOP AT lt_purchase_order_items INTO ls_purchase_order_items.
    The item attribute of the structure is reference to line item
          ls_mepoitem = ls_purchase_order_items-item->get_data( ).
          APPEND ls_mepoitem TO lt_mepoitem.
        ENDLOOP.
    CHECK VENDOR IS THE ONE WE WANT.
        SELECT SINGLE name1 FROM lfa1 INTO l_name1 WHERE lifnr = ls_mepoheader-lifnr.
    First read the vebdor name based on LIFNR.
        TRANSLATE l_name1 TO UPPER CASE.
        IF ( l_name1 EQ 'LSP1' ) OR ( l_name1 EQ 'LSP2' ).
          LOOP AT lt_mepoitem INTO ls_mepoitem.
            TRANSLATE ls_mepoitem-werks TO UPPER CASE.
            IF ls_mepoitem-werks EQ 'FI01'.
              l_continue = lc_set.
              l_pass_vendor = ls_mepoheader-lifnr.
              l_pass_plant = ls_mepoitem-werks.
              EXIT.
            ENDIF.
          ENDLOOP.
        ENDIF.
        IF l_continue EQ lc_set AND sy-tcode EQ 'ME21N'.
    Call the POP UP screen to display LPS information.
          CALL FUNCTION 'ZMAN_LSP_POP_UP'
            EXPORTING
              im_vendor = l_pass_vendor
              im_plant  = l_pass_plant
            IMPORTING
              ex_text   = l_text.
    GET Text Object (TTXOB)
          im_header->if_longtexts_mm~get_textobject(
                        IMPORTING ex_tdobject = l_tdobject
                                  ex_metafield = l_metafield ).
    GET TEXT IDS
          im_header->if_longtexts_mm~get_types(
                        IMPORTING ex_texttypes = lt_texttypes ).
    CHECK TEXT TYPE 'F01' EXISTS.
          READ TABLE lt_texttypes INTO ls_texttypes WITH  KEY tdid = lc_id.
          IF sy-subrc EQ 0.
    UPDATING ITEM TEXT.
            MOVE: l_tdobject TO ls_textlines-tdobject,
                  ls_texttypes-tdid TO ls_textlines-tdid,
                  '*' TO ls_textlines-tdformat.
         break prbist.
            ls_text = l_text.
         CONCATENATE l_text ls_texttypes-tdtext INTO ls_textlines-tdline.
           CONCATENATE ls_text-vendor
                       ls_text-plant
                       ls_text-lsp_vendor
                       ls_text-contract_no_text
                                               INTO ls_textlines-tdline SEPARATED BY space.
           APPEND ls_textlines TO lt_textlines.
          INSERT VENDOR
           CLEAR ls_textlines-tdline.
           CONCATENATE lc_vendor ls_text-vendor INTO ls_textlines-tdline SEPARATED BY space.
           APPEND ls_textlines TO lt_textlines.
          INSERT LSP VENDOR
            CLEAR ls_textlines-tdline.
            CONCATENATE lc_lsp_vendor ls_text-lsp_vendor INTO ls_textlines-tdline SEPARATED BY space.
            APPEND ls_textlines TO lt_textlines.
          INSERT CONTRACT TEXT.
            CLEAR ls_textlines-tdline.
            CONCATENATE lc_contract_no_text ls_text-contract_no_text INTO ls_textlines-tdline SEPARATED BY space.
            APPEND ls_textlines TO lt_textlines.
         INSERT A BLANK LINE.
            CLEAR ls_textlines-tdline.
            APPEND ls_textlines TO lt_textlines.
    INSERT addreSS CAPTION.
            CLEAR ls_textlines-tdline.
            MOVE 'Address:' TO ls_textlines-tdline.
            APPEND ls_textlines TO lt_textlines.
            break prbist.
    READ THE ADDRESS
            SELECT SINGLE   ort01      " city
                            ort02      " district
                            pfach      " PO Box
                            pstlz      " Postal code
                            regio      "Region (State, Province, County)
                            telf1      "1st telephone number
                            telf2      "2nd telephone number
                            telfx      "Fax number
                            land1      "COUNTRY
            FROM lfa1 INTO ls_address WHERE lifnr = ls_mepoheader-lifnr.
    GET COUNTRY
            SELECT SINGLE landx FROM t005t INTO l_landx WHERE spras = 'E' AND land1 = ls_address-land1.
    INSERT ADDRESS DETAILS.
            CLEAR ls_textlines-tdline.
            CONCATENATE ls_address-ort01 ls_address-ort01 INTO ls_textlines-tdline SEPARATED BY space.
            APPEND ls_textlines TO lt_textlines.
    INSERT COUNTRY.
            CLEAR ls_textlines-tdline.
            MOVE l_landx TO ls_textlines-tdline.
            APPEND ls_textlines TO lt_textlines.
    TELEPHONE DETAILS
            CLEAR ls_textlines-tdline.
            CONCATENATE 'Tel:' ls_address-telf1 '/' ls_address-telf2 INTO ls_textlines-tdline.
            APPEND ls_textlines TO lt_textlines.
    FAX DETAILS.
            CLEAR ls_textlines-tdline.
            CONCATENATE 'Fax:' ls_address-telfx INTO ls_textlines-tdline.
            APPEND ls_textlines TO lt_textlines.
          SAVE THE HEADER LONG TEXT.
            im_header->if_longtexts_mm~set_text(
                          EXPORTING im_tdid = ls_texttypes-tdid
                                    im_textlines = lt_textlines ).
          ENDIF.
        ELSEIF l_continue EQ lc_set AND sy-tcode EQ 'ME59N'.
    No need to display POPUP simply read the values and show.
    if not
        ENDIF. "(l_continue = 'X' and transaction code is ME21N or ME59N)
        CLEAR l_continue.
      ENDIF. "(sy-uname)
    ENDMETHOD.
    Edited by: Prasenjit Singh Bist on Aug 14, 2011 10:15 AM
    Edited by: Prasenjit Singh Bist on Aug 14, 2011 10:21 AM

  • Error when posting unplanned depreciation

    Hello,
    When posting an unplanned depreciation  we are facing an error "In area 01 you can post manual dep upto the amount 0.00".
    I checked the depreciation area and in it when for unplanned depreciation changed the setting to postive values but the error persists. I also tried all values and still the error persists. I also checked the transaction type 640 and there also if I made changes to allow postive values the error still persists.
    I also want to mention that is not happening if I used another asset belonging to another asset class.
    Please let me know if there is something else I am missing out.

    Hi Susan,
    do you have the option to reverse the transfer postings? If so, you could specify another period control for transfer postings (such as fiscal year start, etc.) in your depreciation key, with which you can influence how much depreciation is left back respectively transferred.
    It is correct that you can´t post an unplanned depreciation on the sending asset now, because the net book value would go below zero. As unplanned depreciation does not influence the ordinary depreciation in the year of posting, this value below zero can not be adjusted with a reduction of planned ordinary depreciation.
    I am wondering which effect you´d like to have on the sending asset. Did you post a complete retirement? If so, there should be no APC left which you can depreciate on the sending asset. And as the net book value is zero already, which effect do you want to get? You have to keep in mind that the non-depreciated APC will be continued to depreciate (normally) on the receiving asset. But maybe I misunderstood the problem here ...
    Regards,
    Markus

  • FORMATTING ERROR when executing smartform with message SSFcomposer  159

    Hi all,
    I have created a custom smartform.When i execute it in tcode SMARTFORMS,i get the error "FORMATTING ERROR" "GRAPHIC CANNOT BE DISPLAYED".
    I have a image file(LOGO) which is used in this Smartform.However this problem is faced only in the QUALITY system.In DEV system,the Smartform works fine.
    PLease advise.
    Thanks.

    Hi,
    is the logo also in the QTY system.
    Che the name of the logo, then go in transaction SE78 and check if the logo exist.
    Otherwise, create a transaport (always from SE78 trx) and transport the logo in the other systems.
    Hope it helps
    Bye
    Andrea

  • I am getting an unsupported format error when trying to import the.aaf file.

    When I select File > Import > File, and then select my .aaf file, nothing happens.
    When I select File > Import > Pro After Effects and then select my .aaf file, it imports the files, then I get an unsupported format error for .mov files.
    Help!

    Kbuggle,
    Which video in the tutorial does this step apply to (i.e. importing the AAF file)? Are you importing from the sample files that accompany the tutorial? Finally, can you post a screen shot of the error message you're getting?
    Also, please confirm which version of After Effects you're running, as well as the operating system.
    Thanks!
    Stefan

  • Update termination error when posting goods issue

    Helllo
    I have a strange problem I can not figure out.  We have serial numbers like 12345/345.  When trying to post goods issue I get an update termination error  for invalid character. This only happens if the quantity is more than 1 each.  A quantity of 1 each works fine and receives no update termination when post goods issue...only recieve termination error if the post goods issue is for a qty of 2 each.
    I searched the SAP site found OSS note 40355...applied the note.  The note also mentions the chaging print paramters to include "/ _"  this is all done.
    I tried doing a ABAP Debug in SE38 (for the delivery note print program) and setting the breaking point, but when I go to run the transaction after the setting break point...when I hit post goods issue...SE38 does not return back to its screen.  So not sure if I am running the correct program there...or if this works for the update terminations?
    So strange I do not get this for a qty of one each only when it is greater than that.  I am stumped need help....
    Any advice wiould be GREATLY appreciated....

    Looks like there is an error in the delivery (or material movement ?) print program. Easiest would be to disable these outputs for test purposes. When no dump then the error is somewhere in the print program an could be analysed by triggering the print separately with ABAP RSNAST00.
    regards Jack

  • BORGR. Error when posting Inbound Delivery

    Within transaction BORGR, when posting an inbound delivery, the material document is in state "Archived" instead of completed.
    This is observed in the document flow of inbound delivery.
    Status WBSTK and WBSTA of tables VBUK and VBUP are recorded with " C" even though that the material document does not exist in the system.
    This error does not allow to continue with the transport order creation of the received material.
    I would like to know the possible reason for this problem and the solution.
    Thanks.

    In the config of  Define Internal Confirmation Categories 
    is
    2 shipping notification is assign to 10 or LA if it LA than it will allow you to create the inbound delivery
    The delivery is created in my system
    i got message
    Notified quantity exceeds quantity still to be notified 15.000- CS   Message no. ME160                                               
    but it is warning not error.

Maybe you are looking for