08 iWeb not allowed previous used fonts

anyone figure why my imported fonts which could be used by older version, now cannot be read with new version for my blog? If this is the situation, I will revert back to older version.... any body know? no genius, procare knew why.

halsri wrote:
We have a group account that we use for support. We have used the Delegated Administrator to limit which domains can send to the list by setting "Allowed Domains:" to the form "*.our.domain" on that list.
We are now getting thousands of the spam to "postmaster" saying that saying the message could not be delivered because "Reason: you are not allowed to use this list:". We have successfully kept a lot of spam from going to that group mailing list, but we as postmasters would like to not receive all those messages telling spammers that they can't send to the list. Is there a way to turn off those "not allowed to use this list" messages to postmaster for the group list?There appears to be two issues here:
1. The postmaster address is getting a copy of the bounce emails.
2. The mailing list is not rejecting the email at the SMTP level, rather it is creating a DSN bounce email.
Whether the postmaster gets a copy of bounce emails is controlled by the various warnpost, sendpost etc. imta.cnf channel configuration parameters. More information on turning these off here:
http://msg.wikidoc.info/index.php/Turn_Off_Postmaster_Notifications
For the second issue, if a mailing list has the "maildeferprocessing" attribute set to "yes" then the email will be accepted (without checking the allowed/disallowed recipients) and processed 'offline'. If the email is rejected during this processing then a bounce email is created.
As of Messaging Server 6.3 you can set mailDeferProcessing to "After_Auth" to cause group validation to be done immediately but group expansion to be deferred.
Setting mailDeferProcess to "no" causes the group expansion and validation to be performed before the email is accepted. The downside to this is that for a large mailing list that take a long time to expand, the email client could time out and the email not accepted.
Regards,
Shane.

Similar Messages

  • Farm Remote App 2012 R : Your system administrator does not allow the use of default credentials to log on to Work Resources

    Hi
    Here is the situation:
    I have a Farm with 3 servers W2012R2 in a Domain
    Server1                           Server 2                                  
    Server3
    RDSession Host            RDSession Host                            
    RDSession Host
    Connection Broker        Connection Broker (Passive)
    RD Web Access
    2 DNS Alias : - poc.mydomain.local (Use for the RD Web Access and points to Server1
                        -poccb.mydomain.local (Use for the Connection Broker and points to Server1)
    I have setup the Connection broker in HA with Server2 as Passive Server : DNS Round Robin poccb.mydomain.local (Server1)
    The certificate Manager has generated 2 CA certificates :
    - 1 for the RD Web Acc (poc.mydomain.local
    -1 for Connection Broker SSO and for publishing
    I have created 1 Group Policy for these 3 servers and 1 GP for my client Windows 7 SP1.
    Server GPO :
    Computer/Administrative Templates/Windows Components/Remote Desktop Services/Remote Desktop Session Host/Security
    Always prompt for password upon connection=Disabled
    Require use of specific security layer for remote (RDP) connections : SSL (TLS 1.0)
    Set client connection encryption level : High Level
    Client GPO
    Computer/Administrative Templates/System/Credentials Delegation = Allow delegating default credentials (Concatenate OS defaults with input above)
    TERMSRV/POCCB.mydomain.local
    I use no Gateway and in my collection,I have activated SSL (Like in my Server GPO)
    I have now problem with SSO.
    Connection with remote desktop client with server name = poccb.mydomain.local
    Your system administrator does not allow you the use of default credentials to log on to the remote computer poccb.mydomain.local because its identity is not fully verified
    If in my client GPO I add the physical name of the 3 servers, it works :
    TERMSRV/Server1
    TERMSRV/Server2
    TERMSRV/Server3
    Open RDP Files with server name = poccb.mydomain.local
    if my connection broker connects me on Server1 , no problem
    But If I arrive on Server2 & Server 3=
    Your system administrator does not allow the use of default credentials to log on to Work Resources
    I have searched on internet. No result for " to log on to Work Resources"
    Any idea ? Thanks for your help

    Hi,
    Thank you for posting in Windows Server Forum.
    Firstly check that, your user is using domain\username to enter the credential in the dialog box.
    Now for a try, you can edit .rdp file with notepad and just place “enablecredsspsupport:i:0” line in it, save it an launch to check whether you are facing same issue.
    As you are using windows 7 then upgrade to RDP 8.1. Also as you have already enter the FQDN name of server under “Allow delegating default credentials”. For a try please enable and configure for all the remaining settings as follow and check the result.
    Start / Run / gpedit.msc / Computer Configuration / Administrative Templates / System / Credentials Delegation, and make sure you have the following four options enabled and configured:
    Allow Delegating Default Credentials with NTLM-only Server Authentication
    Allow Delegating Default Credentials
    Allow Delegating Saved Credentials
    Allow Delegating Saved Credentials with NTLM-only Server Authentication
    Finally, open a command prompt and use “gpupdate /force” command to apply the policy directly.
    More information:
    Remote desktop credentials did not work
    Hope it helps!
    Thanks.
    Dharmesh Solanki

  • Error in COR1 - Material not allowed to use

    Hi,
    Material is in the stock "unrestricted use " but does not allow to use in a production process order. All related options are verified for example : MB51, MMBE, Date of production is prior to use, Quality is OK, Not in blocked stock, not reserved for some other order, same material was in use from same batch till 02.06.09 suddenly since 03.06.09 a error pops up during batch determination during creating a " Process Order " through COR1.
    Regards,
    Suresh

    Check the Cross plant Material status in Basic data and plant specific status in MRp1 in the material master.
    look for material master changes
    Regards
    Ratan
    Edited by: Ratan on Jun 22, 2009 4:17 PM

  • IPad Air iOS8.0.2. I used the photos app to edit my photos and created a new album for them. When I transfer my photos to my PC via cable (not allowed to use cloud services by my boss) i can only transfer the unedited versions. Any tips? Thanks!

    iPad Air iOS8.0.2. I used the photos app to edit my photos and created a new album for them. When I transfer my photos to my PC via cable (not allowed to use cloud services by my boss) I cannot choose this edited album, only transfer the unedited versions. Any tips? Thanks!

    Hi Anjohi,
    Thanks for visiting Apple Support Communities.
    If you've edited photos on your iPad and only see the original version when you import them to your computer, the tips in this article may help:
    iOS: Edited photos show original photo after import or in other apps
    All the best,
    Jeremy

  • HT1539 What happens when you attempt to download a digital copy, but it doesn't upload in iTunes, and you're not allowed to use the code again?

    What happens when you attempt to download a digital copy, but it doesn't upload in iTunes, and you're not allowed to use the code again?

    Thanks for your reply, but you might have misunderstood it a bit. I'm NOT trying to buy a movie. ****, I'm not even in the actual Apple Store, when this happens I'm in the library not the Store part of iTunes.
    To clarify - I have purchased a physical copy of a movie which came with another physical copy which contains the digital copy. The digital copy is on the DVD, all I need is just to transfer this file to my iPod Touch, for example, I'm not trying to download it from the store or repurchase it and it's not any gift code that I've received, the digital copy is on the disc. This is the first time ever that I've purchased something on a disc and I'm not allowed to access it because the disc hasn't been purchased within my country.
    So again - I'm not attempting any purchase or download any purchased digital copy - it's on a DVD I own physically so... why is even the region of my Store relevant, the code I enter is (as I assume) just supposed to check if it's a legal genuine copy (which it is, as I've said - there are 6 discs in the pack: 3 movies on 3 Blu-rays and 3 DVD containing these digital copies of them). If I own it, I think that's proof enough that I have the right to use it. I just don't get it. I fully agree with you and understand your point if there was any purchase going on here, but it's not, it's just - I put a disc into my computer and I can't access it

  • What kind of is this and how do I exterminate it? “Not allowed to use restricted network port”

    What kind of is this and how do I exterminate it?
    “Not allowed to use restricted network port”
    < Edited by Host >

    If you have anti virus software installed, try disabling that and try turning off the Firewall.
    System Preferences - Security / Firewall.

  • Is there any BI Dashboard view not allowed to use in BIP report?

    My customer wants to display BI Dashboard page on BI Publisher report.
    Is there any BI Dashboard view which is not allowed to use in BI Publisher report?
    Seem no summarized document for this, and then can I understand like “No related limit for BIP report”?

    Explore this page OBIEE - Presentation Variable System (reserved variable) | GerardNico.com (BI, OBIEE, OWB, DataWarehouse)

  • Error Employee is not allowed to use cost object

    I am getting below error when I try to submit my expense.
    Employee 1833539 is not allowed to use cost object 9443688 - 10 of type Sales Order Item on 05/01/2014
    I cheked few things as below.
    1. I do have valid sales order with valid end date
    2. I did enter my time in ISP for the date in question
    3. The work location entered for the date in question is "On Premise" which means I travelled.
    has anyone faced similar issue? Any help is greatly appreciated.
    Regards,
    Rajesh

    I suggest that you report an incident so that your travel department can confirm if you are staffed on the SO in SAP Cloud for Travel and Expense. 

  • I am not allowed to use upgrade on this computer ???

    Itunes 7.6 keeps telling me, that I am not allowed
    to use the Jan-update on my computer ? ? ?
    It does not allow me to sync the upgrade
    to my ipod touch FW 1.1.3 eventhough my Vista-PC
    is activated to Apple.
    Need help - thanks

    It works for me now.
    I had to delete the folder C:\ProgramData\Apple Computer\iTunes\SC Info
    Subsequently, I had to authorize my computer from the administrator account.
    Seems that VISTA messes something up when you try to authorize the computer from a non administrator account.
    Gruz

  • Allowed domains and not allowed to use this list messages

    imsimta version
    Sun Java(tm) System Messaging Server 6.3-3.01 (built Jul 12 2007; 32bit)
    libimta.so 6.3-3.01 (built 20:10:10, Jul 12 2007; 32bit)
    SunOS mars 5.10 Generic_125100-08 sun4u sparc SUNW,Sun-Fire-V240
    We have a group account that we use for support. We have used the Delegated Administrator to limit which domains can send to the list by setting "Allowed Domains:" to the form "*.our.domain" on that list.
    We are now getting thousands of the spam to "postmaster" saying that saying the message could not be delivered because "Reason: you are not allowed to use this list:". We have successfully kept a lot of spam from going to that group mailing list, but we as postmasters would like to not receive all those messages telling spammers that they can't send to the list. Is there a way to turn off those "not allowed to use this list" messages to postmaster for the group list?
    Hal Huntley

    halsri wrote:
    We have a group account that we use for support. We have used the Delegated Administrator to limit which domains can send to the list by setting "Allowed Domains:" to the form "*.our.domain" on that list.
    We are now getting thousands of the spam to "postmaster" saying that saying the message could not be delivered because "Reason: you are not allowed to use this list:". We have successfully kept a lot of spam from going to that group mailing list, but we as postmasters would like to not receive all those messages telling spammers that they can't send to the list. Is there a way to turn off those "not allowed to use this list" messages to postmaster for the group list?There appears to be two issues here:
    1. The postmaster address is getting a copy of the bounce emails.
    2. The mailing list is not rejecting the email at the SMTP level, rather it is creating a DSN bounce email.
    Whether the postmaster gets a copy of bounce emails is controlled by the various warnpost, sendpost etc. imta.cnf channel configuration parameters. More information on turning these off here:
    http://msg.wikidoc.info/index.php/Turn_Off_Postmaster_Notifications
    For the second issue, if a mailing list has the "maildeferprocessing" attribute set to "yes" then the email will be accepted (without checking the allowed/disallowed recipients) and processed 'offline'. If the email is rejected during this processing then a bounce email is created.
    As of Messaging Server 6.3 you can set mailDeferProcessing to "After_Auth" to cause group validation to be done immediately but group expansion to be deferred.
    Setting mailDeferProcess to "no" causes the group expansion and validation to be performed before the email is accepted. The downside to this is that for a large mailing list that take a long time to expand, the email client could time out and the email not accepted.
    Regards,
    Shane.

  • Not allowed to use olsql on this Db

    hello all.....
    I have this message when i try to into plsql developer with connection normal, when i use sysdba no problem but i can't see some stored procedures...
    message full:
    you are not allowed to use pl/sql on this database.
    how i can to fix the problem when i access normal way??
    thanks for you help!!!

    I believe this has to do with custom authorization functionality implemented by the PL/SQL Developer product. See the online help to learn how to either grant the privileges you desire or disable the authorization functionality (note that this will not affect native database authorization, just the optional, custom layer implemented by the PL/SQL Developer product).

  • Why is not allowed to use "/" in Storage bin?

    Dear experts,
    It is mentioned in the Help that "For technical reasons it is not allowed to use the special character "/"  while creating storage bins.
    Kindly let me know what is the technical reason behind this?
    regards,
    Shetty

    / is a character that is used in IDOCs to indicate that a field should be left untouched
    So it is impossible for SAP to decide whether it has to input the / or to not process this field.

  • System not allowing to use park workflow only for GL

    Hi Gurus,
    We have created workflow variant and selected release posting and release payment.
    We want to use workflow only for GL document but when we are parking vendor invoice in fv60, system is not allowing to post parked vendor invoice and saying not released.
    We want one user to park and post vendor invoice. Right now we are not able to.
    Please help.
    Thank you

    Hi Mohit,
    Post can be possible to next authorized level. Check settings or else go to FBV3 ,enter document number ,company code and year > Enter > where you can see the workflow tab > Click on that where you came to know how may release levels are assigned.
    In same view > Click on system in menu bar > services for object > Click on workflow icon > where you came to know who is the next approver.
    Regards
    Mani

  • Not allowed to use sudo in X (xterm)

    From the day i started with arch i haven't been able to launch sudo in X, it works perfectly in the virtual terminals. Su works, and i have used that one until now.
    One example of output is yaourts:
    Password:
    You are not allowed to launch /usr/bin/pacman with sudo
    Please enter root password
    Password:
    What have i missed?

    http://wiki.archlinux.org/index.php/Sudo
    Have you configured the user settings right?
    Try giving full privilledges first.
    USER_NAME   ALL=(ALL) ALL

  • 405: Method Not Allowed after using GetRemotePortalSession

    Hi - I'm currently using portal version 5.0.3 and VS.NET 2003. I'm attempting to use a remote session through a test portlet (trying out one of the search samples) and I'm running into an issue. I believe I'm connecting to the remote server, but each time I attempt to call a method using one of the remote interfaces I'm getting:
    The request failed with HTTP status 405: Method Not Allowed.
    The portlet is configured to pass the login token - I can actually query that from the portletContext - after that, I'm sunk. Anyone have any ideas why I might be getting this?
    Thanks,
    Eric
    '// Get the Portlet Context
    DimportletContext AsIPortletContext = Plumtree.Remote.Portlet.PortletContextFactory.CreatePortletContext(Request, Response)
    '// get the remote portal session, the login token must be configured to be sent to this portet
    DimportalRemoteClient AsIRemoteSession = portletContext.GetRemotePortalSession()
    Me.lblOutput.Text = portalRemoteClient.GetAPIVersion.ToString
    '// get the search factory ISearchFactory
    Dim searchFactory As ISearchFactory = portalRemoteClient.GetSearchFactory()
    '//Kaboom.

    For anyone who comes across this issue. Be sure to check your Portal Server Settings utility under the Portal URL Manager. This is what brought the error up for me. While there may be other causes its one easy thing to check. Under the .Net version of plumtree the Soap Server URL should read something like this:
    http://<servername>/ptapi/QueryInterfaceAPI.asmx

Maybe you are looking for

  • Page Fault Processor Exception TSA Scan

    Been getting the following Abend when running a backup job with Backup Exec 12. This only happens when trying to backup the OFFiles directory. Tried to run a nss /poolverify , but it keeps crashing the server each time I try to run. Server is 6.5 wit

  • Error while adding oracle as a source system to BW

    Hi Experts, I am trying to connect BW to the oracle database. While connecting I am getting the error "Source System XXXXX Cannot Be Accessed". I checked for the TNS name and Connection Info in TNSNAMES.ORA  and everty thing seems to be good. Please

  • Importing Photos from iphoto to iweb in proper orientation

    I have photos in iPhoto that I have rotated because they were shot vertically but when downloaded into iPhoto they are in a horizontal or "landscape" mode. When I use the Media browser in iWeb, all images appear as they were originally downloaded, in

  • Battery For Late 2008 Aluminum MacBook?

    Where can I get a genuine Apple battery for my Late 2008 Aluminum MacBook?

  • Uploading info records by using BDC

    Hi all, Does any one having knowledge in uploading info records (ME11) by using BDC. Problem arises when going for multiple scales. Can any one let me know how proceed this BDC. Regards, Raj