0897: Formatter doesn't work in package editor

Just downloaded latest version.
The SQL Formatter does nothing in the package editor, but works in the SQL worksheet.

Thanks for the feedback.
This issue has now been resolved

Similar Messages

  • Lightroom 5 doesn´t work as external editor

    Problem with Lightroom 5.
    my workflow on windows 7 was managing the photos with Zoner Photo Studio version 16- then sending the picture  from with : open with  to lightroom.
    . After unistalling updates 5.3  5.4  or 5.6 it doesn´t work .
    Does anyone know this problem?
      Thanks

    Lightroom is not and will not work as an external photo editor as it is a non-destructive digital asset manager and editor that works through it's own catalog database. All images have to be imported into Lightroom before any development can be undertaken.

  • Autocomplete doesn't work for packages that were just installed

    After installing a program with pacman, I wasn't able to use autocomplete in bash or zsh for that program, even though I was able to run it. If I made a new terminal autocomplete worked fine, it was only in the terminal I had just used to install the application where the autocomplete didn't work. I found out after a while that I can manually run `hash -r` after installing a package to get this to work. Is there any way I could do this automatically after installing a package, or is there another way I could get autocomplete to work right after installing a package?

    Your .zshrc is only read when you start a new shell: https://wiki.archlinux.org/index.php/Zs … tion_files

  • EA1 - Right gutter scroll bar in the Code Editor doesn't work?

    SQL Developer version 4.0.0.12, Windows XP
    I'm opening package body in Code Editor. In previous version of SQL Dev after pressing CTRL and moving mouse over the right gutter I could see a few lines of the code from mouse pointed position in the source.
    Now it doesn't work.
    Link below - section "Working in the Procedure Editor":
    http://www.thatjeffsmith.com/archive/2012/01/viewing-plsql-compilation-errors-in-oracle-sql-developer/

    Hi,
    It is true the right gutter's general scrolling window view capability no longer exists in 4.0.  However, if code errors exist, then small blue squares (uncompiled code) or slightly larger red rectangles (compiled code) appear in the gutter representing the relative positions of the bad code.  Hovering the mouse over those produces a pop-up display of the offending code and, in fact, the pop-up will not display if the Ctrl key is pressed at the same time. Of course, clicking on the rectangles or squares moves the editor's current line to that code as in earlier releases.
    So it is not clear whether this is merely the new, intended behavior, or if more of the prior behavior remains to be implemented in 4.0.  As far as I can tell, nothing important has been lost here, but that is just my opinion.
    Regards,
    Gary
    SQL Developer Team

  • Premier Elements 13 Organizer Works. Editor doesn't. Log in doesn't work

    I downloaded and installed Premier Elements 13 last night. In using it today, Organizer works, but when I select Editor, I am required to log in to my account to activate it. When I do so, then I eventually reach the agreement to terms page, accept it but Editor still doesn't work. Contacted Chat and had an extremely humourous but extremely frustrating chat before the chat stopped working (??????)  Here is a copy and paste of the chat up until Chat stopped working: 
    Here is my chat at the last point I saved a copy......
    Thank you for contacting Adobe.
    A representative will be with you shortly.
    Thank you for your patience.
    While you wait, you can try our community forums where experts are available 24 hours a day, 7 days a week.
    Thank you for your patience.
    While you wait, you can try our community forums where experts are available 24 hours a day, 7 days a week.
    You are now chatting with Amit Kumar.
    Amit Kumar: Hello! Welcome to Adobe Customer Service.
    Gordon Stogre: I tried the forums but no one had replied for the last 2 hours. Experts must be on vacation.
    Gordon Stogre: Hello Amit. Are you there?
    Amit Kumar: http://www.adobe.com/cfusion/tdrc/index.cfm?product=premiere_elements&loc=us
    Gordon Stogre: Do you want me to click on that link?
    Amit Kumar: Yes
    Gordon Stogre: Why?
    Amit Kumar: Download it again from this link.
    Gordon Stogre: I've already downloaded and set up Premier Elements 13.
    Gordon Stogre: That was last night
    Gordon Stogre: Why?
    Amit Kumar: Download and install itagain from this link.
    Gordon Stogre: It took about 2 hours to set it up on a fast internet connection
    Gordon Stogre: Why should I have to do it again. It is already set up and installed.
    Gordon Stogre: The problem is with the Editor. The Organizer works correctly.
    Amit Kumar: There is some issue with the software.
    Gordon Stogre: What is the issue. Please explain
    Amit Kumar: Some files did not download that's why it is not working.
    Gordon Stogre: Are you saying that the Adobe file download is faulty?
    Amit Kumar: Yes
    Gordon Stogre: Everything downloaded correctly and it installed correctly
    Amit Kumar: Ok
    Amit Kumar: One moment while I transfer you to the specialist that can assist you.
    Gordon Stogre: I want a refund on what I paid for Premier 13. This is ludicrous that I should have to spend this much of my time downloading and installing.. I want it free now.
    Gordon Stogre: This is absolutely ridiculous that Adobe uploaded a faulty software. My time is extremely valuable.
    Amit Kumar: I have arranged refund for this product.
    Gordon Stogre: I have spent a total of 6.5 hours downloading, setting up and installing and then trying to get it working.
    Gordon Stogre: But I still want to use this product with the properly working software. Is my licence still valid if I download and reinstall it?
    Amit Kumar: I have arranged refund for this product now.
    Gordon Stogre: WILL I STILL BE ABLE TO USE IT ????
    Gordon Stogre: Will my licence that I purchased for Premier Elements 13 still be valid???
    Gordon Stogre: I want to use it but am very frustrated and annoyed by the problem.
    Amit Kumar: You will not be able to use it.
    Gordon Stogre: I NEED TO USE IT !!!
    Gordon Stogre: Do you understand?
    Gordon Stogre: I want a refund and an operating version of Premier 13.
    Amit Kumar: But I have arranged refund for this product now.
    Gordon Stogre: Please escalate this to your supervisor if you are not able to do this.
    Gordon Stogre: Or I will publish this all over internet
    Amit Kumar: Would you mind waiting for 2 - 3 minutes while I research on this issue?
    Gordon Stogre: I will wait
    Gordon Stogre: 6:13 local time now. About 9 minutes since you asked me to wait...............
    This continued on until 6:39 when the supervisor told me he was transferring it to "the group that could help me with this issue"  Then the chat shut down.

    Oldcameraman
    At the forum level, there is no instantaneous reply. And, there is no "how long before I get someone to post in my thread" expectation.
    This is not Adobe. Rather user to user. Although I personally try to see that every thread has a viable reply before the end of the day, there are no guarantee how long it will take for a thread to be answered with some information that may actually help you resolve your particular issue. I am not affiliated with Adobe in anyway. Just a user with an overactive troubleshooting gene.
    From what you wrote, you no longer have a purchased product. You demanded your money back from Adobe via its Adobe Chat, and you got what you demanded, that is, your money back request put into action. So, I am not sure what you are left to work with.
    If you purchased from an online download from Adobe and the install apparently did not take, then it is not unreasonable to be asked to uninstall/reinstall the program with antivirus and firewall(s) disabled. That may or may not help. There are certain troubleshooting drills that need to be followed as one systematically goes through the progress of ruling factors in or out of the problem equation.
    Part of the drill might have included:
    a. What computer operating system is your Premiere Elements 13 running on?
    b. Does the problem exist with and without the antivirus installed?
    c. Are you running the program from a User Account with Administrative Privileges and with Run As Administrator applied to the desktop icon?
    d. Is your video card/graphics card up to date according to the web site of the manufacturer of the card? How many video cards/graphics cards does your computer use, 1 or 2?
    e. Is your computer connected to the Internet?
    f. Is the latest version of QuickTime installed on your computer along with Premiere Elements 13?
    g. Other
    But, none of the above is going to be of use if you do not have a purchased copy of Premiere Elements 13 to work with. You need to sort out your Adobe situation with Adobe.
    We will be watching for your progress. We want you to succeed.
    ATR

  • Adobe Photoshop Elements 12 Editor doesn't work anymore on my Mac Pro...

    Adobe Photoshop Elements 12 Editor doesn't work anymore on my Mac Pro, running Mac OS X Yosemite 10.10.2. I don't know why, because Photoshop Elements has always worked properly before today.
    Quite disappointing. I installed the application in May, 2014, downloading it from the App Store, and now I would like to re-install Photoshop Elements.
    Can you help me, please?

    Command + shift + alt... and it works again! Thanks a lot.

  • Release build and standard packaging doesn't work for iOS mobile project.

    Hi,
    We are trying to port our web application on iOS(iPad). Made some minor changes and package ipa with fast packaging method. It works great.
    Now we are try to package application for AppStore and use Standard method. But error occurs.
         Error occurred while packaging the application:
         Exception in thread "main" java.lang.Error: Unable to find named traits: spark.components::Application
             at adobe.abc.Domain.resolveTypeName(Domain.java:225)
             at adobe.abc.Domain.resolveTypeName(Domain.java:142)
             at adobe.abc.GlobalOptimizer$InputAbc.resolveTypeName(GlobalOptimizer.java:272)
             at adobe.abc.GlobalOptimizer$InputAbc.readInstance(GlobalOptimizer.java:994)
             at adobe.abc.GlobalOptimizer$InputAbc.readAbc(GlobalOptimizer.java:390)
    Distribution certificate and provisioning profile are used for compilation.
    Restarting FB and OS doesn't help. Packaging via command line also throws same error.
    Exporting Release build shows other error. After opening Export Release build window and click next error occur:
         Encountered errors or warnings while building project XXXX.mxml.
         configuration variable 'runtime-shared-library-path' requires a value 'rsl-url'.
    All the libraries are merged into code, not RSL.
    OS: Windows XP SP3, Windows 7.
    Flash Builder: 4.5.1.
    Flex SDK: 4.5.1 build 21328.
    AIR: 2.7.1(2.7 shows erros also).
    Thanks in advance for your answers.

    Hi,
    Please send your swf and app-xml to [email protected] so that we can try it at our end.
    Thanks,
    Amish.

  • BUG: EA 2.1 code editor: completion insight doesn't work in opened files

    I just migrated from SQLDEV 1.5.5 to EA 2.1. It's nice that I colud find so many of my suggestions implemented in this new version. THANKX :-)
    code editor:
    When I'm working in SQL Worksheet the "completion insight" feature is working well, but when I try to use it in an opened file, it doesn't work.
    Is there a special preference to turn on for use with files?
    Edited by: @chris on 12.11.2009 10:57

    Correct it did work in 1.5. on .sql files, when connected, so I have updated the ER to bug. We also need to expand this to support PL/SQL files.
    Sue

  • Subquery for inserting doesn't work in Oracle package

    I have experienced a very strange scenario while inserting data inside a Oracle package.
    I have two tables:
    - table "A"
    Columns: "ID", "Value1", "...."
    - table "A_Backup", which contains backup data for table A. It has one more column "BATCH_NUMBER" than table A
    Columns: "BATCH_NUMBER", "ID", "Value1", "...."
    I created following procedure in a package to backup data from table "A" to "A_Backup".
    procedure proc_backup (v_id in number) is
    declare
    v_batch_number varchar2(20);
    begin
    /** generate a batch number using system date */
    select 'BATCH' || to_char(sysdate, 'YYYYMMDDHH24MISS') into v_batch_number from dual;
    /** insert Batch_NUMBER + data from A into A_BACKUP */
    insert into A_BACKUP (select v_batch_number, id, value1, ... from A where A.id = v_id);
    end proc_backup;
    When I debug the procedure, it will not insert any data into A_BACKUP. Apparently, there are some data in table "A" meets criteria "A.id = v_id".
    The strange thing: If I create same procedure. But this time I didn't put procedure inside the package, insert query will work.
    Please help, I have spent a couple of days on this and never make it work. I also tried cursor, it doesn't work either. It seems Oracle package doesn't support "virtual table" (subquery in insert) or whatever you call it.

    Welcome to the forum!
    Whenever you post provide your 4 digit Oracle version (result of SELECT * FROM V$VERSION).
    I don't see any package or test code that calls the procedure or error messages or results from any procedure calls.
    You say you have a problem with a package but don't post the package version of the code you are having a problem with.
    How is anyone supposed to find a problem in code that you don't post? And when you post use \ tags as discussed in the FAQ.                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                       

  • Package Manager doesn't work

    I have Solaris 11 running under Virtual Box on OS X. When I try to use the Package Manager, I enter my administrator password...and absolutely nothing happens. Same thing with the Update Manager.
    Any idea why it doesn't work?

    but after installing one wire from the VI Package Manager I found nothing new thing in arduino (figure below) I checked : low level, sensors, utility, examples. and I searched on the internet the driver of one wire (DS18B20) to Arduino and i found nothing.
    Attachments:
    arduino (one wire).png ‏43 KB

  • "Auto completion" doesn't work in the new ABAP editor

    Hi Gurus,
    It is quite strange that the "auto completion" doesn't work for me in my new laptop. After I press "ENTER", it starts a new line.
    Any body know this?
    Thanks a lot.

    Hello,
    Use "Tab" instead of "ENTER"

  • EA1 - PgDown, PgUp doesn't work in editors

    SQLDev version: 4.0.0.12, Windows XP
    Select some table -> right-click Open -> select "Data" tab -> pressing keys "Page Up", "Page Down" doesn't work.
    The same is with "Columns" tab (you can check if you have a table with a dozens of columns)
    A little different behaviour is on the "Constraints" tab: "Page Up", "Page Down" scrolls content only one row up or down.

    Bugged.
    Thanks for the report!

  • Code Insight in opened pkb-files doesn't work

    If i open oracle package body under Packages node, then opened editor allows me to use code Insight.
    If i open pkb-file by double clicking it, compiling it against connected database successfully, and trying to use code insight, then it doesn't work. No helping auto-complete works there.
    How can i use autocomplete in pkb-files?
    Version 2.1.0.63

    Yes, seems we have to wait till verson 3.0.
    Also same question is there:
    Autocomplete (code insight) not working when opening package files (.pkb)

  • Trial and Evaluation for NW ABAP 7.02 SP6 64-bit Installation doesn't work

    Hello Colleagues,
    the installation of SAP Developer Version under Download SAP NetWeaver Main Releases\SAP NetWeaver Application Server ABAP 7.02 SP6 64-bit Developer Edition doesn't work.
    Different to the requirements I tried to installed on VM Player and with Windows Server 2003.
    Only when ABAP Imort reached package 34 (successfully imported) the installation process stopped without any error.
    Like frozen.
    Please does anybody now the problem? Or is the Installation on Windows 2003 general not possible or at VM Player?
    Many thanks in advance!
    Regards,
    Jochen

    Hello, Jochen.
    Or is the Installation on Windows 2003 general not possible or at VM Player?
    It is possible.
    Check VMware options, especially allocated operative memory size.
    If there is not enough memory, VMware begins to use swap and productivity becomes very low. As a result, program freezes.
    Best regards,
    George Shlyahov.

  • What to do when Outlook AutoArchive doesn't work

    AutoArchive feature helps us manage the space in the mailboxes or on the e-mail server that were are using by automatically moving items to an archive location. These items can be Email messages, Calendar items, Tasks, Notes, Journal entries.
    However, sometimes some users may find that Outlook AutoArchive doesn’t work as expected, this can be frustrating. In this article I’ll introduce some steps to troubleshoot this issue, I hope it will be helpful to those who meet the issue.
    Always check the Default AutoArchive settings first
    When AutoArchive is not working properly, the first thing we should do to troubleshoot the issue, is to make sure the AutoArchive setting is correct.
    I’ll take Outlook 2013 for example, go to FILE tab -> Options -> Advanced -> AutoArchive -> AutoArchive Settings… button, we will see the AutoArchive window below:

    To make AutoArchive work, make sure the first checkbox has been selected and you have configured how frequently you want AutoArchive to run.

    If you select “Prompt before AutoArchive runs”, it will notify you before AutoArchive runs.

    If you want to delete expired items, select “Delete expired items (e-mail folders only)”.

    You should select “Archive or delete old items”, or only expired items will be deleted.

    Select “Show archive folder in folder list” to let the archive.pst appear in the folder list, which helps you find archived items easily.

    You can set the age of the items that you want to archive in the field of “Clean out items older than x”, the age is based on the last Modified date by default. I’ll introduce this later in this article.

    Then you need to decide whether to move old items to an archive .pst file, or permanently delete old items. Once you have your choice, you can apply these settings to all folders now and click OK to save the settings.
    AutoArchive doesn’t work on one specific folder?
    Apart from the default settings, each folder can be set with its own AutoArchive settings different from the global settings.
    Right click on the folder and select Properties -> AutoArchive tab.

    You can select “Do not archive items in this folder” if you want this folder to be an exception of AutoArchive.

    If you select “Archive items in this folder using the default settings”, you will archive items in this folder using the default settings as it states, and the “Default Archive settings” button below is referring to the same AutoArchive
    window as FILE -> Options -> Advanced -> AutoArchive -> AutoArchive Settings.

    If you want the AutoArchive settings for this folder to be different from the Default AutoArchive settings, select “Archive this folder using these settings”. The age of items can be set to a different one, you can even select a separate
    .pst file to archive items in this folder. After everything is decided, click OK to save the settings.
    Please note these settings are specific to each folder and are not applied to subfolders. Please configure the settings individually for each folder.
    Modify the ArchiveIgnoreLastModifiedTime registry value
    Outlook archive works based on the last modified date and time by default, if you
    reply, forward, move, edit, save, import an item, the modified date will change, this may cause the AutoArchive not to archive the item.
    If you want to let Outlook to archive items based on the received date, you need to set the ArchiveIgnoreLastModifiedTime registry value.
    Since serious problems might occur if you modify the registry incorrectly, please back up registry in Windows first:http://windows.microsoft.com/en-US/windows7/Back-up-the-registry
    To create the ArchiveIgnoreLastModifiedTime registry value, follow these steps:
    Press Win + R to start Run, type
    regedit in the Open box, and then click OK.
    Locate and then click the following registry subkey:
    HKEY_CURRENT_USER\Software\Microsoft\Office\14.0\Outlook\Preferences (Outlook 2010)
    HKEY_CURRENT_USER\Software\Microsoft\Office\15.0\Outlook\Preferences (Outlook 2013)
    On the Edit menu, point to New, click
    DWORD Value, type ArchiveIgnoreLastModifiedTime, and then press ENTER.
    Right-click ArchiveIgnoreLastModifiedTime, and then click
    Modify.
    In the Value data box, type 1, and then click
    OK.
    Exit Registry Editor and restart Outlook to make the registry take effect.
    Once the registry key is added, check if Outlook archives the items properly. We can try manually archiving:
    Go to FILE tab -> Info -> Cleanup Tools -> Archive, select the folders that you want to archive and archive criteria, click OK. Outlook should then archive the items based on the received date.
    The Archive .pst file
    As the Archive storage file, the .pst file may cause AutoArchive not working issue. If the .pst file is corrupted or too large, AutoArchive may not work as expected.
    Scanpst.exe is an Inbox repair tool to fix Outlook Data Files like .ost and .ost files, it can be used to fix a corrupted .pst file. To find Scanpst.exe, browse to the locations below:
    For Outlook 2013 on a 32-bit version of Windows:
    <disk drive>\Program Files\Microsoft Office 15\root\office15
    For Outlook 2013 on a 64-bit version of Windows:
    <disk drive>\Program Files(x86)\Microsoft Office 15\root\office15
    For Outlook 2010 on a 32-bit version of Windows:
    <disk drive>:\Program Files\Microsoft Office\Office14
    For Outlook 2010 on a 64-bit version of Windows:
    <disk drive>:\Program Files\Microsoft Office(x86)\Office14
    When the tool is opened, type the path and the file name of the .pst file or click Browse to locate the file by using the Windows file system, and then click Start.
    More details about the tool can be found in this kb below:
    How to repair your Outlook personal folder file (.pst)
    http://support.microsoft.com/kb/272227/en-us
    Another scenario is the .pst file is full. For Outlook 2003 and Outlook 2007 the default limit is 20GB and for Outlook 2010 and Outlook 2013 the limit is 50GB.
    You won’t be able to add items to the archive .pst file when the file reaches 19GB or 47.5GB, once the .pst file gets too large, I suggest you create a new .pst file to archive the items.
    One more thing to remember, don’t store the .pst file on the network share, which we always reminder our users of.
    Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.

    Consider this program that tests whether a number is
    prime.
    [attempt to divide by each integer from 2 to n-1]At risk of lowering the signal to noise ratio, I
    should point out that the algorithm given is just
    about the worst possible.
    I know that the point was to illustrate debugging
    and not good prime test algorithms, and I disagree
    with the correspondent who thought the post was
    condescending.
    Anyway, the java libraries have good prime testing
    methods based on advanced number theory research that the
    non-specialist is unlikely to know. Looking at the java
    libraries first is always a good idea.
    Even with the naive approach, dramatic improvements
    are possible.
    First, only try putative divisors up to the square root
    of the number. For 999997 this is about 1000 times faster.
    Next only try dividing by prime numbers. This is about
    7 times faster again. The snag, of course, is to find the
    prime numbers up to 1000, so there might not be much
    advantage unless you already have such a list. The sieve
    of Erastosthenes could be used. This involves 31 passes
    through an array of 1000 booleans and might allow an
    improvement in speed at the expense of space.
    Sorry if I've added too much noise :-)

Maybe you are looking for

  • Open a new tab in ios7?

    How do I open a new tab in ios7 without going via favourites or home page? There isn't a +sign on right of tab toolbar as previously.

  • ICloud account not matching my iPhone account?

    So when i sign up for itunes i had a different account so now that i got the update and im trying to use the icloud its not letting me cause the email i had back then its still on my iphone account eventhough i change it in my apple account its not l

  • Resize a PDF File

    Hi all. I have created a multi-page PDF document containing text and images which I want to send to a printer. The printer has told me that the page sizes are too big and that part of the content will be cropped in the print process and that I must r

  • Windows 8.1 Alt + F4 key stops working

    After waking a new Samsung laptop from sleep, the Alt F4 key combination fails to close the desktop window with the focus.  The correct behaviour can be restored by carring out a full shutdown (shutdown.exe /s /f /t 00) and restart.  I am unable to t

  • ICal 6.0 data loss.. How can I restore?

    I turned my 2 month old iMac on today and all of my events on my iCal have been deleted. Luckily, the iCal and my Outlook Calendar were synced and the events were saved on the Outlook Calendar. Why did this happen to my iCal and how can I restore the