09 Inspection - QA07 Option to move stock in QI on Insp date
Hi Experts,
I'm having question regarding QA07 option. Just wanted to let you know I already gone through below link as well as some of SAP help document. Even I tested scenario in my system. So wanted ask question to clear my confusion.
http://wiki.scn.sap.com/wiki/pages/viewpage.action?pageId=217383204
Our business requirement is is Inspecton date falls in intial run days then just create an inspection lot without posting stock in QI. But when we run deadline monitoring job second time and if "next inspection date becomes today's date" then only post stock from UNR to QI. What option should I select in QA07/ QA05 to meet this requirements?
First I tested with "to inspection stock at inspection date" option but in this case if 'next insp. date' falls in initial runs then system create a lot and post stock in QI, which we don't want to do. Even this option creates an inspection lot if next insp date is future date not today's. If Next insp. date becomes todays date and lot is still open then only just post stock in QI for an open lot.
Secondly I started testing with 'Lot creation only' option. This option does create a lot without posting stock in QI. But when next insp date becomes today's date then deadline monitoring does not post stock in QI for open lot.
Don't suggest me any document to read. Just suggest acording to your exp.
Hello Eric,
System will never add QI quantity to Existing Inspection lot with status REL CALC.
But system may create new inspection lot with different variant maintained in QA07.
Please check SAP Note.
84857 - Recurring inspection;several active inspection lots.
I would like to see how it works! (or Not)
Update*: This note is not for creating new Inspection lots with different variant but for Avoiding New inspection lots if active inspection lot exist.
I misunderstood.
Amol.
Similar Messages
-
Material with Skip Inspection but no Skip-to-stock goods movement
We have a material with the following QM setting:
Inspection Type : 01 (Active)
Skips Allowed = Yes
automatic usage decision = Yes
Inspection with Task list = No
Dynamic Modification Rule = Set
Cont.Ins Lot creation (QMAT-CHG) = "1. For each Material Doc, material, batch and sloc)
Current DMR Stage is a Skip Stage
For the above settings, when a GR is done for a material in Skip status, the system creates a Inspection Lot with status "SKIP" but still moves the stock to Q-stock.
We expect the movement to be to "unrest" but this does not happen. Also, this Q-Stock Stock Type prints on the GR Slip, which incorrectly prompts the goods to be sent to Quality Inspection. This causes a lot of confusion in the GR/Inspection process
I contacted SAP and they came back with this very unclear message:
if you are using any form of the inspection lot collection the quantity of the inspection lot will be cumulated during the goods receipt postings. So a skip-to-stock would be dangerous as no check of the quality (UD) of the coming goods receipt would occur after the first goods receipt
Has anyone else had this issue? Is there a use-exit that will work around this and move stock directly to Unrestricted use stock?Hi,
We faced the same problem and went back to option:
Cont.Ins Lot creation (QMAT-CHG) = "For each Material Document item
This solves the problem and was in our case the solution for receipts from production. But at goods receipt for purchase orders we still use the option for each material document, batch and SL.
There we pick up the materials in WM by hand by scanning the bar codes on the pallets (printed at GR). The transfer order creates a negative quant in unrestricted use that is later filled by the automatic usage decision that moves the stock from quality to unrestricted in the same bin.
Hope this helps.....
Arno -
Move stock from block to inspectin
HI, i have to move stock from block to inspection, i have tried Mov 349 but it 's giving error
Change the inspection stock of material 6520330201524 in QM only Message no. QA495 Diagnosis You want to make a stock posting to/from the inspection stock. This is not allowed for material 6520330201524 because the quality inspection control has been activated by QM. The following cases can occur: The inspection stock should be increased, although an inspection is not foreseen for the current goods movement The inspection stock should be released, although you can only do this using the QM transactions.Sandeep,
There are many posts here in the forum regarding this topic. I even posted a few myself a couple of years ago. Search them out you'll see there're many ways material can and will be moved into QI, Blocked and Res. intentionally and unintentionally. QM activated negates all the MM and MB Txs. Search them out.
One of several ways this can be done is to:
1. Revise the batch classification/specs. MSC2n
2. Reversing the transaction which put the material in Block, QI, Res. in the first place via MBST if
you've the auth.
3. (Otherwise) Have the creator of the material doc.perform #2 above
Hope it helps.
V. -
Inspection lot using WM movement
Dear All,
I am using QM with WM. I want to create an inspection lot when I am move stock from one bin to another.
Is it possible using a WM movement type and no IM movement type?Hi,
For automatic inspection lot creation. is based on IM movement type only
what movement type u will use for bin to bin transfer
why u need inspection for Bin to Bin transfer ?
thanks -
How to set field "vendor" as optional for movement type 221
Hello experts, I want to set the field "Vendor"(LIFNR) as optional for movement type 221 when create reservation using T-code MB21. As far as I know, field selection of reservations is determined by the settings in the field selection(from201) of the movement type. But even when I have set the field "Vendor" as "optional" both in field selection (from 201) and field selection (Enjoy) for mvt 221 using T-code OMJJ, it is still not shown on the screen of creating reservation. Is it the SAP inside logic that restrict this field for movement type 221 or should I change any other settings elsewhere?
Any help will be highly appreciated.
Best regards!Let me understand ,
u want to reserve stock with MB21 with optional for vendor code or name .
then against the reservation u was t to issue to cost centre or production with 201 rt .
If so hopefully this scenario excludes the normal production order process ( cozz their GI is w.r.t prd order only since reservation is created at backend and also shown in prod order).
ur req is normally for consumables or spares etc and u want o track the vendor also in the Reservation .
possible check is Movement type - screen in omjj
GL account variant settings
MB1a setting
last option - create a screen variant with SHDO tode and activate it .
all will be at client level so please -
Printing movement stock papers - wrong printer in Smartforms
I have two output information for movement stock papers - the standard one and the custom one (which is the copy of the standard one - from the point of configuration).
The only one difference is the forms they uses.
Standard is writen in Sapscript and custom in Smartforms.
Both outputs are printed automatically during the stock movement but the standard one is printed on the the proper printer which was given in configuration and the custom one on the default printer (for the user). Then when I check in document both outputs were processed ok and it should be printed on the same printer - although they wasn't.
I would be appreciated for any clue,
MartaI call my smartforms with following options:
CALL FUNCTION fname
EXPORTING
control_parameters = control_parameters
USER_SETTINGS = ' '
user = z_user_name
id_zm07draus_mm = id_zm07draus_mm
EXCEPTIONS
formatting_error = 1
internal_error = 2
send_error = 3
user_canceled = 4
OTHERS = 5
and now it's even worse... there is no printout at all... -
How to move stock from 916 to Open Area
Dear all
I have stock in Storage Type 916 is 600 KG, in MB52 also to 600 KG
I want to move stock from storage type 916 to Open Area with TCode LT01
I have Message Erorr "E::000 Strg.Type : 916 to is not correct, please changed."
Can you help me please
thanks
imron916 is the zone for goods issue to deliveries.
so the stock is probably allocated to a delivery.
You can unpick the quantity and move it back to any bin you want by using LT0G transaction. -
Not seeing 'Rent' option for movie previously rented
Not seeing 'Rent' option for movie previously rented
^ just want to know why I'm not seeing 'Rent' option for a movie in iTunes Store. Was able to rent same movie previously (on another device)
-
Option to move files rather than to copy them in "consolidate Project"
The option to move files rather than to copy them in "consolidate Project" seems to be missing in LPX. Bummer. Am I missing something?
Hello Darlene.
I don't know if this is what you want, but you may try configuring your applications screen to handle specific file types in a way you prefer:
https://support.mozilla.com/en-US/kb/Options+window+-+Applications+panel -
I am trying to download music from itunes store. it does not however give me that option on the top of the screen. I can only get apps, books, podcasts and itunes u. No option for movies or music
In iTunes go to general preferences and check the boxes for those you wish to see in the library.
-
When click the email icon on my iphone, it opens on one email only. I can not go to the next or previous email, a different email or anything. It only gives me the option to move that email! How can I stop this. Its been working perfectly well before!
Now as you may know there is some icons at the bottom of the mail app, at the top left conner you should have the inbox button and on the upper right conner you should have two arrows to shift between emails. If any of those options works try :
Settings>General>Reset>Reset all Settings
If that does not work try to re add the account
Last but not least, restore as new.
Hope that helps. -
After installing FF 6.0, right-click doesn't work on select boxes, checkboxes & radio buttons, i.e. nothing happens on right-clicking.
The context-menu is available on other elements, but there's no"Inspect Element" option in the context-menuRegarding the two-button click: just go to the "Sytem Preferences --> Mouse" pop-op and under "One Finger", check the "Secondary Click" box. Problem solved. I don't know how I missed this the first 3 times I went to there. Oh well.
And as for why I had to change the Trackpad settings to get the Magic Mouse zoom feature to work (see original question): I'm still stumped. Your guess is as good as mine.
Hope this helps!
Steve -
Installed 1.13 - No option for Movies
After installing the upgrade I confirmed that Maps and Home page features are available. But when I launch iTunes on the iPhone I see the same music choices I had before the upgrade. No option for movie downloads, either rental or purchase. Suggestions welcomed as to what to do. Thanks.
PS. Installed upgrade to iPhone before I upgraded iTunes on my iMac.You can't buy or rent movies from iPhone - do it on your computer and then transfer them to the iPhone.
-
No video output option at movie project setting can not use my blackmagic video card
no video output option at movie project setting can not use my blackmagic video card
There's no change if I hold command-R to boot into recovery. The mac chimes on powerup but nothing else seems to happen.
The machine has an SSD drive in it so I can't even listen to hear if it is loading anything or acting differently when I try different keypresses.
As I had some spare RAM lying around, I've tried swapping that in but no change there either. I still suspect it's a software rather than hardware problem, but without any way to control the boot up, I'm not sure how I can fix it.
I do have remote time machine backups - is there any way of restoring these manually, perhaps by removing the drive from the mac and copying the backup data over using another system? (Unfortunately I don't have any other mac systems to experiment with this, though) -
Stock Report as on any date.
i am developing a stock report as on any date where i have to get the closing stock of unrestricted blocked and transit stock as on any date.
i have taken a table mkpf and mseg to get the quantity and date.
i am not getting what all movement type i should use to get the closing stock for unrestricted blocked and transit and what method i shoud use?
please help me out.Jairaj Kumar ,
Your Report is Little bit complex and time consuming as well.We did a Report same as like you but not Special Stock (means for all of Stock).
For Closing Balance Which will be Opening Balance of next perio/ next day , can be calculated based on DEBIT / Credit inidcator available in the table you are using. This will used of calculate Stock balance. along with movement type for date range.
Hope this will give some info about for ur requirement. Note refer to Tcode MB5L for reference.
Maybe you are looking for
-
How can I see which color space a picture is in in LR5
I don't want to open the pics in Bridge or in Photoshop, but I want to see this information in LR5
-
Error message with Soundtrack after installing on new MacBookPro
I just installed FCStudio v.2 on my new MacBook Pro and did all necessary software updates. I checked all my system requirements and they are fine (it is a brand new MacBook Pro) but when I launch Soundtrack, I get this message: "This machine does no
-
How to retrieve the data stored in BLOB field in MySql using java?
Hi all! i stored a file content into the MySql database in BLOB field. and i now want retrieve the data...... Please help me out in doing the task........... Thanx...........
-
Hi there. I have the iPhone NJ 6 (64Gb) I got (unlock). After returning home, I put the phone to the local operator's sim card. After the first attempt, however, was a problem on the phone screen. the screen was invisible. Scratches appeared. Improvi
-
Safari crash when I open facebook timeline
I prefer to browsing fb desktop on safari instead of fb app, but safari just crash all the time after I zoom in&out several times on the timeline(myself) page. Anyone got the same problem? I hope ios will fix the bug in the future.