0ADHOC web template - How do I execute query views?

Friends,
I am using 0adhoc web template as default. After executing a query I use drill downs and change output and then I click on save view and fill in all the required fields. I can find all those query views in BEx analyzer but not on web report. How do I execute query views from web report?
Thanks in advance.
Message was edited by:
BJ P

Thanks for your input. My users are using save view option on web report and they want to run previously saved views. There should be a way otherwise why would they put save view option.
Any suggestions??????

Similar Messages

WAD: Missing Items in 0ADHOC Web Template

In the Web Application Designer, when I open the 0ADHOC Web Template, it comes up with several missing items. Specifically, SAP_BW_TEXT_!llD_119, SAP_BW_TEXT_!llD_129, SAP_BW_TEXT_!llD_132.
Also, for some Web Items the image is missing. The web items are the Query View Selection, Broadcaster, Data Provider. There is a little red 'x' mark in the left hand side and the words "Image is missing"
Has anyone encountered this? If so could you pelase help me.
Thanks.

hi,
I have just made a test:
I have copied 0adhoc to zadhoc and then deleted SAP_BW_TEXT_!llD_129
then I executed template in IE and text "BEx Ad-hoc Analysis" is missing from the top of report
so those texts are exist as well
Only question is: does those texts numbers same for all systems?
Regards,
Andrzej

How to create a query view in sap bw?

can any one please tell me how to create a query view in sap bw 3.5?

Hi,
you can do this by using Bex analyzer and WAD ..
gop through this link ..
http://help.sap.com/saphelp_nw70/helpdata/en/0e/1339427f82b26be10000000a155106/content.htm
http://help.sap.com/saphelp_nw70/helpdata/en/0d/af12403dbedd5fe10000000a155106/frameset.htm
hope this helps you ..
Reagrds,
shikha

Web Template with multiple Data Provider Query with partial authority

Dear Guru,
I have a single web template, that contains 2 query data providers (e.g. Query A, Query B), and all users access to this web template for both queries.
Now, there are some users that have authority to Query A only.
When they access to this web template, the system automatically say the users do not have authority for Query B in the variable entry screen, and show the variable selection for query A only.
And the problem comes, when user submit the variable entries, the system keep asking for the mandatory variables for query B, which the user actually not authorized to execute. How can this be fixed??
Please kindly help me. Thank You.
Best regards,
Chris

Hi all,
I am looking into the use of Javascript and CustomExtension, but still cannot find any solution.
Can I use CustomExtension to generate Javascript to redirect the page to another web template??
Can I use Javascript to check authority of the users, and alter the Web Items?
Can Anybody help? Many many thanks.
Best regards,
Chris

Precalculated web template - how to use it

Hello everybody,
i need your advice on how to correctly use the feature of precalculated webtemplate.
I have following situation:
we have created a pretty compliacted web template, which must be optimized on performance.
The rule should be: current month data should be available as precalculated webtemplate. people will access the web template with borwser (it will be not send via emial)
Below my questions:
1) How to call the precalclauted web template (if variable is part of report)
I was playing around with this prcealculation fueature and got to the result that the only way to call a precalculated web template if we use variables, is to include the variable and variable value into the URL string
Is this true?
Any other ideas how to call a precalculated web template
2) How to define flexibly the precalculation variant
Right now I have define up to 22 variants for each month (for eachworking day of the month).
For new month i have to define new variants.
My idea is to have it flexible: define one variant for each day of the month. As the month changes, the variants should consist of new dates (for the new month). This should happen automatically. Maybe with ABAP program.
Any idea how to do it?
Maybe anyone has batter idea how to mange the precalculation for given dates
TIA
pawel

hi Kavi,
precalculated webtemplate can be said 'produce' query result first in the background, the 'calcuated' result stored in HTML format (statis), so will speed up report access without execute olap query/accessing database.
the 'disadvantage' is no olap navigation.
use via 'reporting agent'.
there is specific pdf doc for precalculate webtempate in sdn forum, point you later.
http://help.sap.com/saphelp_nw04s/helpdata/en/28/734d3caa70ea6fe10000000a114084/frameset.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/9e/9f653ade969f4de10000000a114084/content.htm
simply wad can be said is editor for webtemplate.
The BEx Web Application Designer is a desktop application for creating Web applications with BW-specific contents. Using the BEx Web Application Designer, you can create an HTML page that contains contents such as various tables, charts or maps.
http://help.sap.com/saphelp_nw04s/helpdata/en/16/a6fe41b227096fe10000000a155106/frameset.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/a9/71563c3f65b318e10000000a114084/frameset.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/1a/456a3badc1b315e10000000a114084/frameset.htm

Remove "inforarea" option when press "open view" in 0ADHOC web template

hello expert,
in a web template 0ADHOC, when you click on "open view" it gives you the option to select your view from history, favorites, roles, and infoarea.
I'd would like to remove the possibility to select a view from "infoarea" in the web template (a little bit like hiding the infoarea button in Bex using S_RS_FOLD).
How can I achieve this?
Many thks in advance,
/Sid

hi,
I have just made a test:
I have copied 0adhoc to zadhoc and then deleted SAP_BW_TEXT_!llD_129
then I executed template in IE and text "BEx Ad-hoc Analysis" is missing from the top of report
so those texts are exist as well
Only question is: does those texts numbers same for all systems?
Regards,
Andrzej

Missing 'open view' functionality in 0ADHOC_TABLE (0ADHOC), web template

Hi - it appears that the 'open view' functionality is missing as button in web template 0ADHOC_TABLE (0ADHOC), despite there is 'safe view' functionality (button).
Did someone add this button/functionality to 0ADHOC_TABLE?
What is the correct Javascript coding as we already tried to incorporate the 'open view' Javascript from template 0ANALYZER what does not work in this matter!
Thx for any hint!
Rgrds,
Markus
Message was edited by: markus hoerr
Message was edited by: markus hoerr

Hi,
as described in the documentation you have to add first HELP_SERVICE and HELP_SERVICE_CLASS to your Web Item
http://help.sap.com/saphelp_nw04/helpdata/en/53/295640a2f78437e10000000a155106/frameset.htm
This is done in Template 0ANALYZER with the TITLE Web Item. Just copy those 2 parameters from 0ANALYZER to 0ADHOC Template, then it should work.
Heike

Web Analysis Error -- Error while executing query and retrieving data

Regarding Web Analysis:
We have a number of reports that we created. yesterday they were all working fine. today we try to open them and most are generating an error.
The error is:
Error while executing query and retrieving data.; nested exception is:
com.hyperion.ap.APException: [1033] Native:
1013033[Thu Oct 22 09:08:17
2009]server name/application name/database name/user name/Error91013033)
ReportWriter exit abnormally
Does anyone have any insight into what is going on?
My version information is:
Hyperion System 9 BI+ Analytic Administration Services 9.3.0.1.1 Build 2
Web Analysis 9.3.0.0.0.286
Thanks in advance for your help.
DaveW

Hi,
And also click on check option by opening the query in Query designer,as Mr . Arun suggested.
And if you get any error in checking, see the long message(detail).
With rgds,
Anil Kumar Sharma .P

Executing Query Views not populating Query Cache?

Hi, I'm executing 3 query views in a web template. I was expecting this to populate the cache for the query which they are based upon, but they are not?
Can anyone verify this behavior?
Thanks!

Hi,
A query uses a cache entry only if it is suitable for it regarding navigational status, filters...
I recommend you to read this how to guide:
https://websmp103.sap-ag.de/~sapdownload/011000358700004339892004E/HowToOLAPCache.pdf
Have a detalied look at sections 3.4 and 3.5:
<i>Cached query results can be used only for the same query. In some cases, real subsets of
cached query result sets can be used; this is possible, if the three following requirements are
met:
It is the same query ID
All selection criteria of the second query must be contained in those of the first call, i.e.
the query result set of the cached query is a superset of the second query
Note that the selection variable must defined as changeable with query navigation! If the
variable was not changeable, the variable value would be part of cache entry key and,
hence, the cache entry could only be used for exactly the same variable values.
The characteristics with differing selection criteria are included in the drill-down of the
cached query result</i>
Hope it helps,
David.
Message was edited by: David Sirvent

How to use execute query For a single record

Hi All,
I am working with oracle forms 10g, I have developed a custom form.
I the form user enter some data and click save in the menu and data get inserted into my table. Inside the insert statement i have hardcoded some values, Once data get inserted i cant able to see that values immediately in my text fields in my form.After requerying i can able to see the changes.
For example I have a text field called Status, and the field is display only field. At that time of insert i have hardcoded as "INCOMPLETE". Once the user enter the data in the form and click save the data get inserted in to my table but i cant able to see the status, after i requery my form i can able to see the status.
Here i do multi insert also.
This is my insert statement
BEGIN
First_Record;
LOOP
IF :BANK_GUARANTEE_BLK.CHECK_IN_OUT = 'Y'
THEN
XXBANK_GUARANTEE_HEADERS.XXBANK_GUARANTEE_INSERT;(this is my package, here i have written my insert statement)
--Execute_query;
END IF;
Exit when :System.Last_Record = 'TRUE';
Next_Record;
END LOOP;
END;
If user insert only one row and i gave Execute_query to refresh and bring the current data, but when i use execute_query Its brings up all the datas in the table.
Can any one tell me how to avoid this and how to use execute_query for a single record.
Thanks &regards
Srikkanth

Solved,
The solution is
set_block_property('LC_REQ_BLK',ONETIME_WHERE,'LC_PO_NUMBER='||:LC_REQ_BLK.LC_PO_NUMBER);
go_block('LC_REQ_BLK');
execute_query;
Works fine.
Regards
Sri

Precalculate Web Templates

Hi Gurus,
I have created a web template with a drilldown, itemviewdropdown (Query View Selection Item), chart and a table. Made the required reporting agent settings and scheduled the package. once the package was released and job was executed in the background, I copied the URL from the WAD's Publish Menu and added &DATA_MODE='STATIC'at the end of the URL and executed in the browser.
I want to make sure that is this how a static precalculated web reports are generated.
Thank You all,
Suneel

Hi Suneel,
Here are some good docs on precalculation;
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/3f85aa90-0201-0010-2282-8dcb123cd7f3
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/0c67b390-0201-0010-e2b8-ff288a5c4c66
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/31b6b490-0201-0010-e4b6-a1523327025e
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/bb7eb390-0201-0010-498c-80532df171a5

Variable in adhoc web template

Dear Experts,
In my adhoc web template, I included a dummy query which has a text variable.
Upon executing the web template this variable is prompted correctly in selection screen.
But, when I execute a query from query designer (the query will be automatically embedded to this adhoc web template when publish to web),
only variable from the query is prompted,
and NOT the text variable which I have in adhoc web template.
Is there any way to have this text variable from adhoc web template even when I execute query from query designer?
Thanks,
Sari.

Yes thanks.
I have put the variable in the query designer and it works fine.
Cheers,
Sari.

Query View missing in the BI Content

Hi
I want to install a 3.x Web Template which is using a Query View as the dataprovider, but the Query View is not available as D-version and hence the Web Template throws an error that the query view is missing and hence cannot execute the web Template.
I have checked in the tables : RSZWVIEW and there is an entry but there is not object in RSORBCT to install.
SAP BI_CONT version 704 level : 003
When i try to activate the D-version of the query view the it gives the following message:
*Object 0CSAL_C07_Q0101_V01 (Query View) could not be collected for object ()
Message no. RSO296
Diagnosis
You have collected objects in the BI Metadata Repository. Associated objects for object of type have also been collected. Object 0CSAL_C07_Q0101_V01 of type Query View was among these objects.
However, this object 0CSAL_C07_Q0101_V01 of type Query View is not available in the metadata repository.
System Response
Object 0CSAL_C07_Q0101_V01 of type Query View is ignored in further collections. The links for object of type are incomplete. This may result in you not being able to activate this object.
Procedure
If this error occurs while you are installing BI Content, an error may have occurred during the delivery. Inform SAP. In all other cases, check that the object has not been deleted by another user during collection, for example.*
Please let me know incase of any other info required.Thanks!

Hi Kumar....
Go to Datasource Repository(RSA2)................give the datasorce name and click on display.......from there u will get the extract structure name......copy it ...........go to SE11.............In the table field give the Extract structure name.............and click on the Where used list in the top.................from there u will get all the program name/Function module............where this extract structure is used...........copy that name and open it through SE37................
Hope this helps..........
Regards,
Debjani........

Deleting query views in a portal

Hello BI fans,
I want to add a delete button in a web template to delete a saved query view (based on a query which shows data). Unfortunately there is no default command or instruction for data provider according to the commands LOAD and SAVE_AS.
Can I use SCRIPT_FUNCTION instead of INSTRUCTION to get the necessary functionality? There is a method DELETE_VIEW (CL_RSZ_WWW_DB_INTERFACE). Has anybody an idea to use this method or another idea?
To delete the query views by BEx Analyzer is not a good way for us since the normal user should not use the BEx Analyzer but the portal.
Thanks in advance

Hi Britta,
Now, I understood your concern. Please check the link:-------
http://help.sap.com/saphelp_nw04/helpdata/en/33/51fa40badbf36fe10000000a1550b0/frameset.htm
You can follow the Durgesh thread also.
Regards,
Suman

How to build Information button in WAD, web template

Hello friends,
I am working in BI 7.0 WAD
well i designed a query in Bex and it is linked with portal , so if i run the query it shows the result in Portal
On portal while executing the query if i filter on some characteristics, then there is a button on Upper left named INFORMATION--- so if i click that it will give me the details, what extra filters i did , what extra restrictions i did.
I am now using the same query in WAD, in order to design a web template.
So please suggest how to create that Information tab in Web template.
I think i have to create a Button, than name it as Information,
But then selecting a Command, what Selection do i have to make
Which command selection i have to do and what settings I have to make.
Please suggest appropriate step by step approach as i am new and learning.
Also if you can tell how to use a specific Query in WAD to design a Web template.
Thanks
W

I am new ,so if you can shed light by giving steps i will appreciate it.
In SPRO, i can see SAP REFERENCE IMG, IMG INFORMATION, PROJECT ANALYSIS, MANAGE WORKLIST ....
How shall i go to reporting section.
All reports are linked to portal so they execute equally on Portal with same setting.
So how shall i copy that web template/
If i copy the web template , how shall i remove everything else.
How shall i use that web template in My WAD.
How to save that Web template.
Do i have to do everything in Bi server, as i can use SPRO tcode only there.
If i create new template in WAD, how can i drag and drop the function as of default template.
How shall i set the property
Please suggest

0ADHOC web template - How do I execute query views?

Similar Messages

Maybe you are looking for