0AFMM_C02 Infocube - which is right Initialization datasource

Hi,
We are planning to use infocube 0AFMM_C02 but want to know which initialization datasource has to use for this infocube.
There are two initialization datasources one is 2LIS_03_BX and 2LIS_AF_STOCK_INITALIZATION. Among these two which datasouce is correct to use for the infocube 0AFMM_C02?.
If I have to use datasource 2LIS_AF_STOCK_INITALIZATION as specified in help.sap in the below link i have to fill setup table by going to SBIW in Customizing: Business Information Warehouse ® Settings for Application-Specific DataSources ® Logistics ® Settings: Inventory Controlling ® Stock initialization. Here which transfer structure i need to select because 2LIS_AF_STOCK_INITALIZATION datasouce is not showing as transfer structure there eventhough it is activated.
http://help.sap.com/saphelp_nw70/helpdata/en/c2/62464ddadb4d658a3bbb03ca935bbc/content.htm
Best Regards,
SG.

Check here >
Inventory extraction - AFS
http://help.sap.com/saphelp_sm32/helpdata/EN/6f/830b3b5d6d924fe10000000a11402f/content.htm
Thanks.
Shambhu

Similar Messages

Delete Data in Infocube which come from the same datasource before loading

Hi,experts
We would like to delete the data in infocube which come from the same datasource--0CO_OM_CCA_1 before we load it again.
and would like to using a process chain to do it.but it seems difficult in BI7.0
Could you give some suggestion,thanks
Best Regards
Jero

Hi Ian,
have you tried to use the "Get Delta only Once" flag in the DTP.
Please see for example thread
<a href="https://forums.sdn.sap.com/thread.jspa?threadID=370427">https://forums.sdn.sap.com/thread.jspa?threadID=370427</a>
for some details.
Nevertheless, the process type 'Delete overlapping requests' is most of the times needed in conjunction with this flag and should work. If in doubt please send me a private EMail containing the customer problem number. Maybe you have a specfic scenario.
Cheers
SAP NetWeaver BI Organisation

How to I produce a PDF which goes right to the edge on a Mac?

How to I produce a PDF which goes right to the edge on a Mac? I have recently moved to a Mac. I now have Acrobat X Pro 10.1.3, and Mac OS X 10.7.3. When I used Windows and Acrobat X Pro I was able to print to Acrobat to produce documents which went right to the edge on screen. Now on Mac I can only produce documents which have a border on them. I expect I am missing something quite fundamental, but it is frustrating me so I am seeking some help from those who know how to do this. Thank you in advance.

So I did a little exploring in Word for the Mac. I set the Word margins to 0 inches, then I placed a picture that went to the edges of the page.
The problem seems be that Word is very simple-minded, and when in the Print dialog, it adjusts the preview of the Print feature to the margins of the currently-selected printer. For my HP inkjet printer, that's about 1/8" in from the edges. When that data is passed to OS X to create a PDF, it uses those margins in the PDF file.
In Word for Windows, Acrobat installs a PDFMaker plug-in for Word. PDFMaker contols the creation of PDF so there are a lot more settings possible.
Acrobat has never made a plug-in for Word for the Mac. As to why, this has been debated endlessly for the past 15 or so years. Adobe claims that Microsoft doesn't provide the handles to do it in the Mac version of Word. Whether that's true, I don't know.

Saprouter service on windows - which user rights are required?

Hi,
We have the saprouter service running in a windows 2003 server, this service is started by a user account named 'saprouter' which has its password set to never expires.
Due to security concerns, our IT Security Deparment have ask us to apply all the following restrictions to the 'saprouter' user:
   1) 'Logon locally' user right is disabled
   2) Userid is not a member of the Administrators group
   3) Deny access to the user rights: 'Access this computer from network' and      'Logon through Terminal Services'
As per our security policy, non-expiring passwords are allowed only for users that can meet all the conditions listed above.
The questions are ¿Which user rights should be granted to the user account that starts the saprouter service? ¿Could we apply the conditions listed above without impact the saprouter service?
Thank you for your kind attention.
Sokram

following permissions are required to set SAPRouter working :
1. password never expires
2. user never change the password
3. should be member of administrator
4. profile --> home folder :c:\user\sap\saprouter (path of instllables)
5. end disconnected session : never , active session limit : never , idle session limit : never
check if you can apply above points for your users
Regards,

Which are the initialization parameters that can be replaced by Environmet ariables

If I am connecting to SQL Plus from a command window(cmd), which are the variables that I can set in Environment, so that it overrides the values set in init.ora file.
For eg I can SET the following environment variables using a batch file
SET NLS_DATE_FORMAT=RRRR-MM-DD
SET NLS_LANGUAGE=US.AMERICAN.ISO***
Now when a new SQL session starts this values are set in the new session.
Can I know which other Oracle initialization parameters can be set in a batch file.

http://otn.oracle.com/docs/products/oracle9i/doc_library/release2/nav/initora.htm

Which are the initialization parameters that can be modified by Environmet variables

If I am connecting to SQL Plus from a command window(cmd), which are the variables that I can set in Environment, so that it overrides the values set in init.ora file.
For eg I can SET the following environment variables using a batch file
SET NLS_DATE_FORMAT=RRRR-MM-DD
Now when a new SQL session starts this values are set in the new session.
Can I know which other Oracle initialization parameters can be set in a batch file.

http://otn.oracle.com/docs/products/oracle9i/doc_library/release2/nav/initora.htm

Attempting to use bluetooth, but my newly replaced 2nd generation iPod touch searches but never detect my wireless headphones which are right beside it. My old iPod had no problem detecting and connecting to the same headphones.

Attempting to use bluetooth. My newly replaced 2nd generation iPod touch searches but never detect my wireless headphones which are right beside it. My old iPod had no problem detecting and connecting to the same headphones.

You can try:
- reset:
Reset iPod touch: Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
- Power off an then backon your router
- Reset network settings: Settings>General>Reset>Reset Network Settings
- The troubleshooting here:
iPhone and iPod touch: Troubleshooting Wi-Fi networks and connections

HT4437 U-verse says I don't need APPLE TV to use Air Show. Apple instructions say I do. Which is right?

U-verse says I don't need APPLE TV to use Air Show. Apple instructions say I do. Which is right?

If you mean AirPlay, you can only wirelessly stream video (either the iPad's screen or an app with video out) via an Apple TV or a computer running software such as Reflector or AirServer (the computer would be connected to the TV). There are other devices, including Apple's Airport Express and a number of third-party audio receivers and speaker sets, that can stream audio only.
Regards.

Creating process chains containing an infocube which contains a DSO

Hi All,
I am trying to create a process chain for Delivery Services which contains an infocube(0PUR_C08).the infocube in turns contains a DSO(0PUR_O01) which contains 4 datasources.please give me the flow of the process chain and how to link the DSO and the infocube..
Points will be awarded:)
Regards,
Manjari.

Hi Manjari,
If you have four datasources and if you are loading data into a single Data target from those Datasources, you should follow the order according to the fields and the dependency on the primary keys in those loads. To load data from different datasources into a single data target, all the datasources should have common field which represents a primary key.
For example:
Datasource1 contains Fields F1, F2, F3.
Datasource2 contains fields F1, F4, F5.
Here F1 is the common field in both the datasources.
If you want to load data into single Datatarget from these two datasources, you should load according to the requirement and the retrieval of data based on each other. If you want to link all the fields, you may need to write routines in the update/Transfer rules. It all depends on the dataflow.
Based on these you should have the order in process chains.
If you are loading data into different data targets from different data sources, you can load anything at anytime either parallelly or one after the other.
Hope this helps u...
Regards,
KK.

Delete data from infocube which is older than 7 days.

Hi Gurus,
I have a Cube with the time dimension characteristic as 0CALDAY. This cube gets data from a DSO ,which has 0calday as one of its key fields, in Delta mode. I am in a need to delete the data with calday in the previous week. i.e SY-DATUM - 0CALDAY >= 7 in the infocube.
I just tried to create a transformation such that both the data target and the source is the above mentioned DSO and used the technical rule group to set the record mode as "D" for the older records and it works fine with the DSO.
But the Cube still has the data. Just the keyfigure becomes zero. But i want to completely delete the data. I do not want to use "DELETE-FACTS" or the FM "rsdrd_sel_deletion."
Please help me get out of this problem.
Thanks in advance,
Rajesh.

Hello Rajesh
Not sure if I understood the problem correctly, but what I understood is you need to keep only last 7 days data in the cube and anything else got loaded earlier should need to be deleted.
If this is correct then can you delete the whole cube content and load only last 7 days data from DSO to cube via DTP filter ( or some start routine).
In this case first time delta ( or full) will never read from change log table but it will read from active table of DSO only
Regards
Anindya

AirPort Express versus AirPort Extreme - which is right for me?

I am trying to figure out what the right product is for me to set up my apartment for Wireless. I have a new MacBook Pro, and my boyfriend has an older MacBook. Our Internet service is of a moderate speed - up to 10 Mbps.
My question is whether I will see any difference in speed for Internet access and downloads with the AirPort Extreme, or if I will have basically the same experience with the Express? Also, someone told me that since there will be an older (approximately 2.5 yo) computer connected to the Express, it will default to that speed if I have the Express. I want to connect at the best speed possible, but also don't have the money to waste if the Extreme won't make a huge difference.
Any advice would be appreciated.
Thanks!

Welcome to the discussions!
The AirPort Express will create a single wireless network that will handle up to 10 connections, to that would work fine for your purpose. Since you have a newer "n" speed computer and an older "g" speed computer there (when you say 2.5 yrs+ I am guessing that it is a "g" device..you might want to confirm), the default radio mode that the Express creates would allow both computers to connect. If you are connected, you will be at the faster "n" speed. If the "g" device connects, the wireless network will drop down to "g" levels as long as that device is active.
The AirPort Extreme will create two separate wireless networks, plus it includes 3 ethernet ports if you wanted to connect devices to it directly with an ethernet cable, which is a much faster connection that wireless. The advantage of a dual network arrangement would be that you could connect at a faster "n" speed on the "main" network, while the other computer would connect to the "guest" network at "g" speeds and the "g" connection would not affect your "n" connection.
If you are going to use your wireless for normal internet browsing, etc. the Express would probably suffice. If you do a lot of downloading, have big email attachments, etc., then the faster "n" speed will make a difference for you. The "g" computer will perform the same with either the Express or the Extreme.

How to declare a JNDI resource which is not a datasource ?

Hi,
I'm looking for a way to create a jndi bound resource, as a jang.lang.String for instance, within oc4j enterprise console or maybe by editing config files.
I'm trying to configure an application once for all, so that I can deploy a .ear which is identical for development, testing, validation, production, ... environments while being able to configure those instance independently.
Can it be done with oc4j ? (it's intuitive to create a jndi bound resource if it's a datasource, but it seems to be the only kind of resource we can create) and if so, how ?
thx in advance
Olivier

Hi Olivier,
As far as I know, this is not possible. I see only three ways
1. Add an OC4J startup class and bind the desired names into JNDI
(not sure, whether this is really possible)
2. If you need the bound JNDI objects only in a web application: just add them to your web.xml file
3. Write your own provider and add it to the default application.xml or to your application's application.xml
Best,
Manfred

Which is right? speedfan or corecenter for temperatures?

For some reason SpeedFan is reporting 3c less than CoreCenter for the CPU temperature, they report the same temperature for system temp.

I've always found that CoreCenter always gives a very conservative (erring on the hot side) reading. Other hardware monitors (SpeedFan (http://www.almico.com/speedfan.php), MBM (http://mbm.livewiredev.com/), Hmonitor (http://www.hmonitor.com/)) consistently report 4-5 degrees less for all CPU temps (idle and load) than MSI's CoreCenter does. I have also found that everybody else who has tested this has found the same thing.
As for which one is "right", just about all temperature readings (BIOS included) are not especially accurate. I tend to trust whatever monitor I'm using at the time. In the broad scope of things, 3-5 degrees is not the difference between stability and instability (or usability and unusability). The temperature report is more or less just an estimate.
-Angler

My iPhone 4S says 4.6Gb free memory, iTunes says 2.7Gb, which is right?

iTunes and my iPhone 4S disagree on how much free memory I have. iTunes report of other memory use bounces between 1.13Gb and 6.4Gb unpredictably after syncs and power-downs. Restore has had no effect.
Which one is right? What gives?

My iPhone 4S replaced my 3G on December 1st. It came straight from my wireless provider. It is NOT jailbroken. When I upgraded from my 3G, other memory went from less than 1.5 GB to around 4.5 GB.
Occasionally a sync or a power-down/power-up has drastically reduced other memory usage, but I can't find a pattern to it.
I just upgraded my MacBook Pro to OS Lion, and iTunes to 10.5.3. Now iTunes says that other memory takes 8.1 GB and that I have 1.24 GB free. The iPhone says there is 3.1 GB available.
A restore has done nothing to reclaim any of that other memory.
I am seeing a similar problem on a brand new iPod Touch, so the problem isn't just my iPhone.
Is the problem IOS 5.0.1 or iTunes 10.5?

How to insert a null value to combobox which is bind with datasource

Hi,
i am working on c# winforms application. I have 2 comboboxes one is CustomerCbBox and another is OrderCbBox. CustomerCbBox is bind with data source.
on CustomerCbBox SelectedIndexChanged event data is populated in OrderCbBox from data source.
i want to add a null or empty field in CustomerCbBox. all I want is that when the user don't Select Customer Name and OrderNo null or empty data enter in database. but when i click Insert Button it generate error "Object reference is not "object
reference not set to an instance of an object".
here is my code.
private void MainForm_Load(object sender, EventArgs e)
production pd = new production();
CustomerCbBox.DataSource = pd.Customer();
CustomerCbBox.DisplayMember = "Cust";
CustomerCbBox.ValueMember = "CustId";
private void CustomerCbBox_SelectedIndexChanged(object sender, EventArgs e)
try
string PartyName = CustomerCbBox.SelectedIndex.ToString();
PONum1.DataSource = pd.GetPOnumActive(PartyName1);
PONum1.DisplayMember = "PONum";
PONum1.ValueMember = "PONum";
catch (Exception ex)
MessageBox.Show(ex.Message);
Please help me to solve this problem thanks.

Hello,
We could check whether the user has selected any items before adding that to database.
if (CustomerCbBox.SelectedIndex > -1)
// do something
}else{//add dbnull to database}
And for adding null to databse, we could pass DBNull.Value instead.
Regards,
Carl
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

0AFMM_C02 Infocube - which is right Initialization datasource

Similar Messages

Maybe you are looking for