0ANALYSIS_PATTERN Issue
Hi,
I have made a copy of 0ANALYSIS_PATTERN as ZZ0ANALYSIS_PATTERN. I have set it as the default template for Ad-Hoc Analysis. Now when I execute a query from the QAD, the system invoking the standard 0ANALYSIS_PATTERN instead of mine. While I manually modify the URL by inserting the string for template: template=ZZ0ANALYSIS_PATTERN it works. Do I need to restart Java for this to take effect? There was a post that said, it is required but if the settings are right it is not. I am not sure whether I need to restart Java. Any suggestions please?
Cheers
Anand
Hi Anand,
For trouble shoots-
1)starting transaction SE38
2) Executing the program RS_TEMPLATE_MAINTAIN_70
3)opening the Web Template 0ANALYSIS_PATTERN
4)pressing "Runtime Format Preview" (should be the last icon)
-> Notepad with text inside should appear
execute test to check if all the configurations are ok ,if not check the config. related oss note-
917950 -SAP NetWeaver 2004s: Setting Up BEx Web
Note 888687 - BEx Web Java: Analysis of communication/logon problems
Use the report RSOR_SETUP to maintain the settings.
Before you use the report RSPOR_SETUP, you should apply the following notes:
916571 RSPOR_SETUP: Adjustments for Template Installer
928332 RSPOR_SETUP: (Part 2) Adjustments for Template Installer
888687 BEx Web Java: Analysis of communication/logon problems
Regards,
Anil
Similar Messages
-
HELP PLS -exception in deploy transformation for "0ANALYSIS_PATTERN"
Hi All,
I have a serious problem here. Please help me here...thanks
We have recently upgraded our BI 7.0 system from BI ABAP - 10 to
Support Package Stack - 16, which includes BI ABAP - 18 and BI JAVA -
16. After the upgrade we are facing problems running any query on the
portal. We get the same consistent error throughout. The portal error
message is enclosed. I tried installing 0Analysis_Pattern many times
but it didn't work.
Secondly when that didn't work I tried running RSPOR_SETUP, in step 2 I
get the error message, Different ABAP and JAVA support package.
SAP came back with a reply saying to do BI JAVA config using template installer. We did that, all looks fine. We also ran the Netweaver Diagnostic tool and all looks fine there as well except the ADS is not configured( I doubt this error is anything to do with ADS as we are not using abode export)
We went through all these notes, 917950, 937697 and 983156 for the configuration.
But again when we run the RSPOR_SETUP we get the same error message: Different ABAP and JAVA support package
Also I ran queries using RSRT ....when I execute using the ABAP Web works fine but opens in port 8000, but when I execute using JAVA web it throws the same error message again as below using port 50000. Also I get the same error message when I open 0ANALYSIS_PATTERN using WAD and try to execute it.
Has anyone faced this problem before?
Error message below
500 Internal Server Error
BEx Web Application
To avoid this exception see the steps below. To help SAP better investigate this issue, you will need to provide the diagnostic information from these steps.
1. Most likely, the issue you are experiencing has already been corrected. Please make sure that the most recent patch level is deployed on your system according to notes 1033246 and 1011241. Starting with Support Package Stack 16 patch level 30, BI Java is delivered according to the synchronized delivery process described in the note 1033246.
2. Please ensure that NetWeaver Business Intelligence Diagnostics & Support Desktop Tool does not report any issues on your server according to note 937697. You can start it by clicking here (administrator permissions are required).
3. When opening any customer message on this issue, please attach:
Support Desktop Tool support info ZIP file according to note 937697,
Required information for reproduction according to note 948490.
Error Summary
Exception occured while processing the current request; this exception cannot be handled by the application or framework
If the information on this page does not help you locate and correct the cause of the problem, contact your system administrator
To facilitate analysis of the problem, keep a copy of this error page Hint: Most Web browsers allow you to select all content, and copy and paste it into an empty document (such as in an email or simple text file)
Root Cause
The initial exception that caused the request to fail was:
General exception in deploy transformation for object "0ANALYSIS_PATTERN"
com.sap.ip.bi.base.exception.BIBaseRuntimeException: General exception in deploy transformation for object "0ANALYSIS_PATTERN"
at com.sap.ip.bi.deploytime.BISP2Jsp.convert(BISP2Jsp.java:555)
at com.sap.ip.bi.webapplications.runtime.jsp.portal.service.template.PortalTemplateAccessService.getTemplateContent(PortalTemplateAccessService.java:90)
at com.sap.ip.bi.webapplications.runtime.preprocessor.Preprocessor.parseTemplate(Preprocessor.java:163)
at com.sap.ip.bi.webapplications.runtime.xml.XmlTemplateAssembler.doInit(XmlTemplateAssembler.java:79)
at com.sap.ip.bi.webapplications.runtime.template.TemplateAssembler.init(TemplateAssembler.java:128)
Log ID 0017A4AB12A7006B00000395000016180004605B78DEE173
Details: Full Exception Chain
System Environment
Server
BI Java Release: 7 - Patch level: 0000000016 - Description: BI Web Applications Java - Additional info: - Production mode: true
BI ABAP Release: 700 - Patch level: 0018 - Description: SAP NetWeaver BI 7.0 (GBDCLNT100) - Additional info: - Production mode: true
Java Virtual Machine Java HotSpot(TM) 64-Bit Server VM - Sun Microsystems Inc. - 1.4.2_15-b02
Operating System Windows 2003 - ia64 - 5.2
Context
ACCESSIBLE false
CACHE true
CONTENT_PADDING true
COUNTRY
DEBUG false
DEBUG_LEVEL 0
DEBUG_MESSAGES false
DEBUG_TEXTS false
DEFAULT_FONT
DISPLAY_STACK_TRACE_IN_ERROR_PAGES true
LANGUAGE en
Master System Alias GBDCLNT100
NAVIGATION_NODE_ACTIVE_IVIEW pcd:portal_content/com.sap.pct/platform_add_ons/com.sap.ip.bi/iViews/com.sap.ip.bi.bex
PROFILING false
Query String (Initial Browser Request) QUERY=TEST30
RTL false
Request URL
SAP_BW_IVIEW_ID pcd:portal_content/com.sap.pct/platform_add_ons/com.sap.ip.bi/iViews/com.sap.ip.bi.bex
SERVER_URL_PREFIX
THEME_NAME sap_tradeshow
TRACE false
TRAY_TYPE PLAIN
Time Tue Jan 13 11:24:52 GMT 2009
USE_HTTPS_FOR_ADS false
USE_SAP_EXPORT_LIB false
User SERCOWNKN (USER.R3_DATASOURCE.SERCOWNKN)
VALIDATION_DATA false
Deployed SCAs
SCA Version SP Patch Compiled Deployed
ADSSAP 7.00 16 0 2008-06-10 11:48:09 BST 2008-12-29 12:21:02 GMT
BASETABLES 7.00 16 0 2008-06-10 12:02:26 BST 2008-12-29 12:02:50 GMT
BI-BASE-S 7.00 17 23 2008-12-24 10:27:08 GMT 2009-01-07 11:53:24 GMT
BI-IBC 7.00 16 0 2008-06-10 17:29:06 BST 2008-12-29 12:45:13 GMT
BI-REPPLAN 7.00 16 0 2008-06-10 18:46:18 BST 2008-12-29 12:59:08 GMT
BI-WDALV 7.00 16 0 2008-06-10 18:46:28 BST 2008-12-29 12:57:58 GMT
BIWEBAPP 7.00 17 23 2008-12-24 10:27:42 GMT 2009-01-07 11:52:59 GMT
BI_MMR 7.00 16 0 2008-06-10 12:03:07 BST 2008-12-29 12:21:38 GMT
BI_UDI 7.00 16 0 2008-06-10 12:03:25 BST 2008-12-29 12:30:20 GMT
CAF 7.00 16 0 2008-06-10 19:14:45 BST 2008-12-29 12:34:53 GMT
CAF-KM 7.00 16 0 2008-06-10 18:52:06 BST 2008-12-29 13:12:43 GMT
CAF-UM 7.00 16 0 2008-06-10 19:14:53 BST 2008-12-29 12:22:26 GMT
CORE-TOOLS 7.00 16 0 2008-06-10 12:06:18 BST 2008-12-29 12:03:19 GMT
EP-PSERV 7.00 16 0 2008-06-10 17:37:42 BST 2008-12-29 13:00:07 GMT
EP-WDC 7.00 16 0 2008-06-10 15:20:00 BST 2008-12-29 13:01:10 GMT
EPBC 7.00 16 0 2008-06-10 17:36:02 BST 2008-12-29 12:23:03 GMT
EPBC2 7.00 16 0 2008-06-10 17:36:14 BST 2008-12-29 13:01:15 GMT
EP_BUILDT 7.00 10 0 2006-10-24 18:44:00 BST 2007-10-03 17:16:57 BST
JLOGVIEW 7.00 16 0 2008-06-10 11:07:00 BST 2008-12-29 12:03:55 GMT
JSPM 7.00 16 0 2008-06-10 11:07:00 BST 2008-12-19 11:42:33 GMT
KM-KW_JIKS 7.00 16 0 2008-06-10 12:09:28 BST 2008-12-29 12:23:19 GMT
KMC-BC 7.00 16 0 2008-06-10 17:38:03 BST 2008-12-29 13:02:33 GMT
KMC-CM 7.00 16 0 2008-06-10 17:38:59 BST 2008-12-29 13:03:37 GMT
KMC-COLL 7.00 16 0 2008-06-10 17:39:23 BST 2008-12-29 13:04:00 GMT
LM-PORTAL 7.00 16 0 2008-06-10 18:55:57 BST 2008-12-29 13:04:05 GMT
LM-TOOLS 7.00 16 0 2008-06-10 19:19:13 BST 2008-12-29 12:40:40 GMT
NET-PDK 7.00 16 0 2008-06-10 17:39:31 BST 2008-12-29 12:53:38 GMT
RTC 7.00 16 0 2008-06-10 17:39:47 BST 2008-12-29 12:53:44 GMT
RTC-STREAM 7.00 16 0 2008-06-10 17:39:48 BST 2008-12-29 12:44:16 GMT
SAP-EU 7.00 16 0 2008-06-10 18:57:14 BST 2008-12-29 13:11:27 GMT
SAP-JEE 7.00 16 0 2008-06-10 12:14:29 BST 2008-12-29 12:04:52 GMT
SAP-JEECOR 7.00 16 0 2008-06-10 12:16:00 BST 2008-12-29 12:08:11 GMT
SAP_BUILDT 7.00 10 0 2006-10-21 20:06:00 BST 2007-10-03 17:17:12 BST
SAP_JTECHF 7.00 16 0 2008-06-10 12:17:05 BST 2008-12-29 12:09:31 GMT
SAP_JTECHS 7.00 16 0 2008-06-10 12:24:43 BST 2008-12-29 12:29:00 GMT
UMEADMIN 7.00 16 0 2008-06-10 19:27:45 BST 2008-12-29 12:41:03 GMT
UWLJWF 7.00 16 0 2008-06-10 17:40:28 BST 2008-12-29 13:04:23 GMT
VCBASE 7.00 16 0 2008-06-10 17:40:33 BST 2008-12-29 13:13:00 GMT
VCFLEX 7.00 16 0 2008-06-10 17:41:04 BST 2008-12-29 12:55:50 GMT
VCFRAMEWORK 7.00 16 0 2008-06-10 17:41:13 BST 2008-12-29 12:56:00 GMT
VCKITBI 7.00 16 0 2008-06-10 17:34:47 BST 2008-12-29 12:44:17 GMT
VCKITGP 7.00 16 0 2008-06-10 17:41:13 BST 2008-12-29 12:44:20 GMT
VCKITXX 7.00 16 0 2008-06-10 17:41:13 BST 2008-12-29 12:44:21 GMT
WDEXTENSIONS 7.00 16 0 2008-06-10 18:58:51 BST 2008-12-29 13:13:18 GMT
Full Exception Chain
Log ID 0017A4AB12A7006B00000395000016180004605B78DEE173
com.sap.ip.bi.base.exception.BIBaseRuntimeException: Error during conversion of the Web template "0ANALYSIS_PATTERN from the master system at com.sap.ip.bi.webapplications.runtime.jsp.portal.service.template.PortalTemplateAccessService.getTemplateContent(PortalTemplateAccessService.java:95) at com.sap.ip.bi.webapplications.runtime.preprocessor.Preprocessor.parseTemplate(Preprocessor.java:163) at com.sap.ip.bi.webapplications.runtime.xml.XmlTemplateAssembler.doInit(XmlTemplateAssembler.java:79) at com.sap.ip.bi.webapplications.runtime.template.TemplateAssembler.init(TemplateAssembler.java:128) at com.sap.ip.bi.webapplications.runtime.base.Template.doInit(Template.java:113) at com.sap.ip.bi.webapplications.runtime.base.PageObject.doInit(PageObject.java:286) at com.sap.ip.bi.webapplications.runtime.base.PageObject.init(PageObject.java:261) at com.sap.ip.bi.webapplications.runtime.base.ItemRenderer.init(ItemRenderer.java:39) at com.sap.ip.bi.webapplications.runtime.impl.Page.initPageObject(Page.java:4995) at com.sap.ip.bi.webapplications.runtime.impl.Page.createPageObject(Page.java:5342) at com.sap.ip.bi.webapplications.runtime.impl.Page.setTemplate(Page.java:6537) at com.sap.ip.bi.webapplications.runtime.impl.Page.doSetTemplateCommand(Page.java:6249) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:324) at com.sap.ip.bi.util.MethodInvoker.callMethod(MethodInvoker.java:101) at com.sap.ip.bi.webapplications.runtime.command.CommandProcessorHelper.processCommand(CommandProcessorHelper.java:415) at com.sap.ip.bi.webapplications.runtime.command.CommandProcessorHelper.processCommand(CommandProcessorHelper.java:330) at com.sap.ip.bi.webapplications.runtime.base.CommunicationProcessor.processCommand(CommunicationProcessor.java:175) at com.sap.ip.bi.webapplications.runtime.impl.Page.processCommandSuper(Page.java:1821) at com.sap.ip.bi.webapplications.runtime.impl.Page.processCommandInternal(Page.java:1787) at com.sap.ip.bi.webapplications.runtime.impl.Page.processCommandSequence(Page.java:2497) at com.sap.ip.bi.webapplications.runtime.impl.Page.doProcessRequest(Page.java:4018) at com.sap.ip.bi.webapplications.runtime.impl.Page._processRequest(Page.java:3021) at com.sap.ip.bi.webapplications.runtime.impl.Page.processRequest(Page.java:2864) at com.sap.ip.bi.webapplications.runtime.controller.impl.Controller.doProcessRequest(Controller.java:994) at com.sap.ip.bi.webapplications.runtime.controller.impl.Controller._processRequest(Controller.java:883) at com.sap.ip.bi.webapplications.runtime.controller.impl.Controller.processRequest(Controller.java:860) at com.sap.ip.bi.webapplications.runtime.jsp.portal.services.BIRuntimeService._handleRequest(BIRuntimeService.java:362) at com.sap.ip.bi.webapplications.runtime.jsp.portal.services.BIRuntimeService.handleRequest(BIRuntimeService.java:279) at com.sap.ip.bi.webapplications.runtime.jsp.portal.components.LauncherComponent.doContent(LauncherComponent.java:24) at com.sapportals.portal.prt.component.AbstractPortalComponent.serviceDeprecated(AbstractPortalComponent.java:209) at com.sapportals.portal.prt.component.AbstractPortalComponent.service(AbstractPortalComponent.java:114) at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328) at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136) at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189) at com.sapportals.portal.prt.component.PortalComponentResponse.include(PortalComponentResponse.java:215) at com.sapportals.portal.prt.pom.PortalNode.service(PortalNode.java:645) at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328) at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136) at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189) at com.sapportals.portal.prt.core.PortalRequestManager.runRequestCycle(PortalRequestManager.java:753) at com.sapportals.portal.prt.connection.ServletConnection.handleRequest(ServletConnection.java:240) at com.sapportals.portal.prt.dispatcher.Dispatcher$doService.run(Dispatcher.java:524) at java.security.AccessController.doPrivileged(Native Method) at com.sapportals.portal.prt.dispatcher.Dispatcher.service(Dispatcher.java:407) at javax.servlet.http.HttpServlet.service(HttpServlet.java:853) at com.sap.engine.services.servlets_jsp.server.servlet.InvokerServlet.service(InvokerServlet.java:156) at javax.servlet.http.HttpServlet.service(HttpServlet.java:853) at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401) at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266) at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386) at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364) at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039) at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265) at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95) at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175) at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33) at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) at java.security.AccessController.doPrivileged(Native Method) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)Caused by: com.sap.ip.bi.base.exception.BIBaseRuntimeException: General exception in deploy transformation for object "0ANALYSIS_PATTERN" at com.sap.ip.bi.deploytime.BISP2Jsp.convert(BISP2Jsp.java:555) at com.sap.ip.bi.webapplications.runtime.jsp.portal.service.template.PortalTemplateAccessService.getTemplateContent(PortalTemplateAccessService.java:90) ... 63 moreHi,
Please help.
How did you manage to resolve this. I have similar issues.
I have SAP_ALL and can run the reports without problems but users have error message
general exception in deploy transformation for object "WEB_TEMPLATE"
thanks -
Issue with running reports on the portal
Hello Guyz
1. I have a question regarding running reports on the portal.
2. I have standard web templates that have been installed in BI.
3. But in the portal, we are not able to run these reports.
4. Do we need to create custom I-Views or can we install them from business content?
5. Can someone explain the process to me AND also any other issues that we might have?
Thanks.Hi Srinivas,
Standard web templates doesnot get installed with attached queries.Create custom web templates in WAD and attach ur queries based on the type of display u like either tabular or graphical.In order to diplay in portal you have to attach webtemplates to iViews and then group iViews to worksets and attach to portal roles.Then add those roles to portal users.From BI Prospective u just create web-templates and give technical names to EP consultants if you have any then they can takecare of rest.If you want to call standard web template 0ANALYSIS_PATTERN from portal you need to have Business Explorer role added to ur user in EP.Using that template u can only open one query at a time and execute.Hope its clear
Chandu -
Error Loading 0Analysis_Pattern
Hi All,
When I try to open template 0Analysis_Pattern in WAD I get the following error.
Components version A do not exists on the database.
When i try to install 0Analysis_Pattern from the BI content I get the following error as soon as i drag the item from left to right.
Object 'BTMP::0ANALYSIS_PATTERN' refers to the invalid object 'QU::'
Object 'BTMP::0ANALYSIS_PATTERN_EXPORT' refers to the invalid object 'QU::'
Message no. RSO274
etc
Please guide me to fix this issue.
I need to customize 0analysis_template as per our client s requirements.
Appreciate it.
Thanks,
HMHi.
I can tell you how to fix this, but I need to send you a document that tells you how to do it... I've sent it to your email.
If anyone else needs the solution, my email is on my business card.
Points would be nice!
You may well need to be up-to-date on patches as well, of course
Patrick -
Bex Web : Functions Template 0ANALYSIS_PATTERN
Hi all,
I have some questions on the standard template 0ANALYSIS_PATTERN :
1/ How to delete an entry in the favorites ? (function "open")
2/ Could you explain "Bex Portfolio" and "My portfolio" ?
Thanks for your help.
Regards,
BertrandHi,
This is a typical front end issue where you have to look at your GUI
patch and front end patch.I recommend you deinstalling your frontend
installation as follows:
- Remove your frontend via 'START' - 'PROGRAMS' - 'SAP FRONTEND' -
'REMOVE SAP FRONTEND'
Please goto
-> service.sap.com/patches
-> entry by application group
-> SAP Frontend Components
-> GUI 7.20
-> BI ADDON FOR SAP GUI
-> BI 7.0 ADDON FOR SAP GUI 7.20
-> BI 7.0 ADDON FOR SAP GUI 7.20
-> Win32
-> - Install the latest frontend and GUI patch and check the installation
again with sapbexc.xla
Please run the front-end checktool SAPBEXC.XLA as per Note 197460 and
ensure there are no errors.
Please refer to following Notes for GUI patch and front end patch:
578944 Expected release dates for SAP GUI for Windows
558994 General information on BW front-end patches
535308 How to apply a SAP Front End patch?
96885 Downloading frontend patches
Thanks,
Venkat -
Language specific text in 0ANALYSIS_PATTERN after sp8
Hello SDN,
After the application of sp8, we encounter a problem when we execute queries directly from the query designer (using standard template 0ANALYSIS_PATTERN). The buttons on the second row (under the query name) have the following text:
'Taalspecifieke text bestaat niet: TYPE=REP KEY1=SAPLRRSV KEY2=757 LANG='
translated:
'Language specific text does not exist: TYPE=REP KEY1=SAPLRRSV KEY2=757 LANG='
The login is in Dutch. Before sp8 (with sp7), we didn't have a problem. I've alreade re-actived 0ANALYSIS_PATTERN from the business content, without results. Does anyone have a solution for or experience the same problems?
Greetz,
DanielBen,
Is it possible you did something else to solve this problem. We are still encountering it and SAP has been unable to identify any issues yet.
I have installed Front end path 801 and 802. And this problem is still occuring.
It doesnt seem to be front related though. I was just wondering if there is something you did as well that might have contributed to correcting this issue after installing SP8.
Thanks -
Query designer and WAD - always a empty 0ANALYSIS_PATTERN
Hello here,
I'am in ABAP SP13 and Java SPS13.
ABAP SID: BDV
Java SID: PDV
The portail works fine. The java tools from note 937697 is green. SSO and communication seems OK.
When i preview a query or a template, only an empty 0ANALYSIS_PATTERN comes.
No message, no error (on the screen and in the trace files).
Same thing from RS_MAINTAIN_TEMPLATE_70.
When i preview an iview with query directly from the protail, it works fine.
When i push "new analysis" from 0ANALYSIS_PATTERN, it works fine and my query is executed with the Bex Web analyser.
It seems that Bex web analyser iview doesn't see the parameters (TEMPLATE=... or QUERY=...).
Have you a solution for this mystery?
Thanks.
AlexandreHi,
The issue is bit surprising!!!
But is it happening for all the queries in Analyzer or only for this query? Because other query related parameters remains same for all the tools, I just want to check if it might be a connectivity issue?
Regards,
Durgesh. -
Object 'BTMP::0ANALYSIS_PATTERN' refers to the invalid object 'QU::'
Hi friends,
i have faced this problem why installing portal content theme and getting this error object 'Object 'BTMP::0ANALYSIS_PATTERN' refers to the invalid object 'QU::'. please reply me as soon as possible.Hi Viral
how did you reslve ths issue?? -
New DVR Issues (First Run, Channel Switching, etc.)
I've spent the last 30 minutes trying to find answers through the search with no luck, so sorry if I missed something.
I recently switched to FIOS from RCN cable in New York. I've gone through trying to setup my DVR and am running into issues and was hoping for some answers.
1. I setup two programs to record at 8PM, I was watching another channel at the time and only half paying attention. Around 8:02 I noticed a message had popped up asking if I would like to switch channels to start recording. I was expecting it to force it to switch like my old DVR, but in this case it didn't switch and I missed the first two minutes of one of the shows. I typically leave my DVR on all day and just turn off the TV, this dual show handling will cause issues with that if I forget to turn off the DVR. Is there a setting I can change that will force the DVR to choose one of the recording channels?
2. I setup all my recordings for "First Run" because I only want to see the new episodes. One show I setup was The Daily Show on comedy central, which is shown weeknights at 11pm and repeated 3-4 times throughout the day. My scheduled recordings is showing all these as planned recordings even though only the 11pm show is really "new". Most of the shows I've setup are once a week so they aren't a problem, but this seems like it will quickly fill my DVR. Any fixes?
Thanks for the help.
Solved!
Go to Solution.I came from RCN about a year ago. Fios is different in several ways, not all of them desirable. Here are several ways to get--and fix--unwanted recordings from a series recording setup.
Some general principles.
Saving changes. When you originally create a series with options, or if you go back to edit the options for an existing series, You MUST save the Series Options changes. Pretty much everywhere else in the user interface, when you change an option, the change takes effect immediately--but not in Series Options. Look at the Series Options window. Look at the far right side. There is a vertical "Save" bar, which you must navigate to and click OK on to actually save your changes. Exiting the Series Options window without having first saved your changes loses all your attempted changes--immediately.
Default Series Options. This is accessed from [Menu]--DVR--Settings--Default Series Options. This will bring up the series options that will automatically be applied to the creation of a NEW series. The options for every previously created series will not be affected by a subsequent modification of the Default Series Options. You should set these options to the way you would like them to be for the majority of series recordings that you are likely to create. Be sure to SAVE your changes. This is what you will get when you select "Create Series Recording" from the Guide. When creating a new series recording where you think that you may want options different from the default, select "Create Series with Options" instead. Series Options can always be changed for any individual series set up later--but not for all series at once.
Non-series recordings. With Fios you have no directly available options for these. With RCN and most other DVRs, you can change the start and end times for individual episodes, including individual episodes that are also in a series. With Fios, your workarounds are to create a series with options for a single program, then delete the series later; change the series options if the program is already in a series, then undo the changes you made to the series options later; or schedule recordings of the preceding and/or following shows as needed.
And now, to the unwanted repeats.
First, make sure your series options for the specific series in question--and not just the series default options--include "First Run Only". If not, fix that and SAVE. Then check you results by viewing the current options using the Series Manager app under the DVR menu.
Second, and most annoying, the Guide can have repeat programs on your channel tagged as "New". It happens. Set the series option "Air Time" to "Selected Time". To make this work correctly, you must have set up the original series recording after selecting the program in the Guide at the exact time of a first run showing (11pm, in your case), and not on a repeat entry in the Guide. Then, even it The Daily Show is tagged as New for repeat showings, these will be ignored.
Third, another channel may air reruns of the program in your series recording, and the first showing of a rerun episode on the other channel may be tagged as "New". These can be ignored in your series if you set the series option "Channel" to "Selected Channel". Related to this, if there is both an SD and HD channel broadcasting you series program, you will record them both if the series option "Duplicates" is set to "Yes". However, when the Channel option is set to "Selected Channel", the Duplicates Option is always effectively "No", regardless of what shows up on the options screen.
As for you missing two minutes, I have sereral instances in which two programs start recording at the same time. To the best of my recollection, whenever the warning message has appeared, ignoring it has not caused a loss of recording time. You might have an older software version. Newest is v.1.8. Look at Menu--Settings--System Info. Or, I might not have noticed the loss of minutes. I regularly see up to a minute of previous programming at the start of a recording, or a few missing seconds at the beginning or end of a recording. There are a lot of possibilities for that, but the DVR clock being incorrect is not one of them. With RCN, the DVR clocks occasionally drifted off by as much as a minute and a half. -
Pension issue Mid Month Leaving
Dear All,
As per rule sustem should deduct mid month joining/leaving/absences or transfer scenarios, the Pension/PF Basis will be correspondingly prorated. But our system is not doing this. In RT table i have found 3FC Pension Basis for Er c 01/2010 0.00 6,500.00.
Employee leaving date is 14.04.2010. system is picking pension amout as 541. Last year it was coming right.
Please suggest.
AshwaniDear Jayanti,
We required prorata basis pension in case of left employees and system is not doing this. This is the issue. As per our PF experts Pension amount should come on prorata basis for left employees in case they left mid of month.System is doing prorata basis last year but from this year it is deducting 541. I am giving two RT cases of different years.
RT table for year 2010. DOL 26.04.2010
/111 EPF Basis 01/2010 0.00 8,750.00
/139 VPF Basis 01/2010 0.00 8,750.00
/3F1 Ee PF contribution 01/2010 0.00 1,050.00
/3F3 Er PF contribution 01/2010 0.00 509.00
/3F5 Ee Mon PF contribution 01/2010 0.00 1,050.00
/3F6 Ee Ann PF contribution 01/2010 0.00 12,600.00
/3F9 PF adm chrgs * 1,00,00 01/2010 0.00 96.25
/3FA PF basis for Ee contri 01/2010 0.00 8,750.00
/3FB PF Basis for Er Contri 01/2010 0.00 8,750.00
/3FJ VPF basis for Ee contr 01/2010 0.00 8,750.00
/3FL PF Basis for Er Contri 01/2010 0.00 6,500.00
/3F4 Er Pension contributio 01/2010 0.00 541.00
/3FC Pension Basis for Er c 01/2010 0.00 6,500.00
/3FB PF Basis for Er Contri 01/2010 0.00 8,750.00
/3FC Pension Basis for Er c 01/2010 0.00 6,500.00
/3FJ VPF basis for Ee contr 01/2010 0.00 8,750.00
/3FL PF Basis for Er Contri 01/2010 0.00 6,500.00
/3R3 Metro HRA Basis Amount 01/2010 0.00 8,750.00
1BAS Basic Salary 01/2010 0.00 8,750.00
RT table for year 2009. DOL 27.10.2009
/111 EPF Basis 07/2009 0.00 9,016.13
/139 VPF Basis 07/2009 0.00 9,016.13
/3F1 Ee PF contribution 07/2009 0.00 1,082.00
/3F3 Er PF contribution 07/2009 0.00 628.00
/3F5 Ee Mon PF contribution 07/2009 0.00 1,082.00
/3F6 Ee Ann PF contribution 07/2009 0.00 8,822.00
/3F9 PF adm chrgs * 1,00,00 07/2009 0.00 99.18
/3FA PF basis for Ee contri 07/2009 0.00 9,016.00
/3FB PF Basis for Er Contri 07/2009 0.00 9,016.00
/3FJ VPF basis for Ee contr 07/2009 0.00 9,016.00
/3FL PF Basis for Er Contri 07/2009 0.00 5,452.00
/3FB PF Basis for Er Contri 07/2009 0.00 9,016.00
/3FC Pension Basis for Er c 07/2009 0.00 5,452.00
/3FJ VPF basis for Ee contr 07/2009 0.00 9,016.00
/3FL PF Basis for Er Contri 07/2009 0.00 5,452.00
/3R4 Non-metro HRA Basis Am 07/2009 0.00 9,016.13
1BAS Basic Salary 07/2009 0.00 9,016.13
Now please suggest what to do. where is the problem ? If have also checked EXIT_HINCALC0_002 but nothing written in it.
With Regards
Ashwani -
Open PO Analysis - BW report issue
Hello Friends
I constructed a query in BW in order to show Open Purchase Orders. We have custom DSO populated with standard
datasource 2lis_02_itm (Purcahse Order Item). In this DSO we mapped the field ELIKZ to the infoobject 0COMP_DEL
(Delivery completed).
We loaded the data from ECC system for all POs and found the following issue for Stock Transport Purchase orders (DocType = UB).
We have a PO with 4 line items. For line items 10 and 20, Goods issued, Goods received and both the flags "Delivery
complete" and "Final delivery" checked. For line items 30 and 40, only delivery indicator note is issued for zero
quantity and Delivery complete flag is checked (Final delivery flag is not checked) in ECC system. For this PO, the
delivery completion indicator is not properly updated in the DSO for line items 30 and 40. The data looks like the
following:
DOC_NUM DOC_ITEM DOCTYPE COMP_DEL
650000001 10 UB X
650000001 20 UB X
650000001 30 UB
650000001 40 UB
When we run the Open PO analysis report on BW side this PO is appearing in the report but the same is closed in ECC
system.
Any help is appreciated in this regard.
Thanks and Regards
sampathHi Priya and Reddy
Thanks for your response.
Yes the indicator is checked in EKPO table for items 30 and 40 and delta is running regularly for more than 1 year and no issues with other POs. This is happening only for few POs of type Stock Transport (UB).
I already checked the changes in ME23N and the Delivery completed indicator was changed and it reflected in EKPO table. Further, i checked the PSA records for this PO and i am getting the records with the Delivery completed flag but when i update from PSA to DSO the delivery completed indicator is not updating properly.
In PSA, for item 30 i have the following entries. Record number 42 is capturing the value X for ELIKZ but after that i am getting two more records 43 and 44 with process key 10 and without X for ELIKZ. I think this is causing the problem.
Record No. Doc.No. Item Processkey Rocancel Elikz
41 6500000001 30 11 X ---
42 6500000001 30 11 --- X
43 6500000001 30 10 X ---
44 6500000001 30 10 --- ---
(Here --- means blank)
Thanks and Regards
sampath -
HP LaserJet Enterprise 600 M602 driver issue
Hello,
I've got issue with 600-series printers. We use the latest UPD drivrer ver. 61.175.1.18849 and print from XenApp 6.5. The error occurs every time when users try to print jpg files from XenApp session. It only happens with 600 series printers and UPD.
Also I've tried to assign native 600-series driver ver. 6.3.9600.16384 and it works good. But with that driver system says that it's color printer and it brokes our printing reports. These reports are very important for us. So we can't use printer and that driver as well.
Printer installed on Windows Server 2012 R2. All clients are Windows 7 x64. XenApp Servers are Server 2008R2.
Is it possible to get fixed UPD driver or correct native driver for Server 2012 R2?
Regards,
AnatolyI am sorry, but to get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial printer. You can do this at Printers - LaserJet.
Click on New Post.
I hope this helps.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP -
Windows 7 displays error message when exiting +cursor issue
Two issues here. CS5 Phoshop on Wind 7 64 bit.
Physical processor count: 8
Processor speed: 3073 MHz
Built-in memory: 12279 MB
Free memory: 9577 MB
Memory available to Photoshop: 10934 MB
Memory used by Photoshop: 80 %
Image tile size: 128K
First issue is since the latest automatic Adobe update (why fix what isn't broken?) Every time I now exit Photoshop I get the message "Adobe QT Server has stoped working" and occasionally it happens when I exit bridge. Indesign is also behaving badly. I can no longer start a previous document from file manager without ID crashing out.
The other is the cursors in Clone and erase lose their edge (become invisable) for no reason - well not quite. Noise Ninja crashed Photoshop when I tried to use it. I reinstalled it and all is well. The cursor issue seems to be intermittant but came back (for no reason) after I reinstalled NN. I can't seem to change the cursor, no matter what I do. The problem is now seriously affecting how I work. Almost enough to go back to Win XP which ran CS5 Photoshop flawlessly.
Any help will be gratefully accepted.
Dougfunction(){return A.apply(null,[this].concat($A(arguments)))}
doug87510 wrote:
The recent problem is the entire outline of the cursor (including the crosshair in the middle) was missing at any size of cursor. All I had was exactly what I'd get if I used a real spraygun.
Well, that issue is simply a matter of hitting the Caps Lock key. When Caps Lock is on, you'll see the cursor outline, and when it is off you'll see a crosshair. That's a feature, not a bug.
Glad to hear the 11.1 drivers are out. I will download them and try them now myself.
Regarding "Adobe QT" crashing... QT brings to mind QuickTime, though that is Apple, not Adobe. Do you have Apple QuickTime installed?
Regarding memory usage, with 12 GB of installed RAM, you should be able to set Photoshop to use 90% or more in Edit - Preferences - Performance.
-Noel -
Issue in Creation of Periodicals for Contracts in CRM7.0
Hello,
I have a requirement to create Contracts in CRM7.0 system.
And I am doing this using the BAPI *BAPI_BUSPROCESSND_CREATEMULTI*
Good part is Contract Order gets created, but onlywith Header Details.
The issues i am facing --
1. I need to know what kind/type of data must be passed to the interface parameters, the F1 Help/Documentation is vague.
2. I am passing data in the INPUT FIELDS structure with the Object ID, Handle Number, Reference GUID and Fieldname,
here what does 'Logical Key' field indicate? What should be passed here.
What does 'REFERENCE KIND' field indicate, i have been passng 'A' for everything (to be frank i dont know whats its significance is!!).
3. With so much, My Order gets created but with less than half details, i.e. the Objects not getting created are - Partner, Product, terms/appointments, Status, LongTexts......
Any help/inputs would be appreciated.
Hope my problem is stated clearly ...
--Regards
DedeepyaHi Anu,
i found my solution by debugging with existing data or while creating it in CRMD_ORDER.
Ensure that you are passing a correct entry in INPUT_FIELDS structure.
As i haven't worked on rebates i woudlnt be able to help you, I suggest you debug to arrive at a solution.
You can preset your break-points at :-
1. FM - CRM_ORDER_MAINTAIN
2. CRM_ORDER_MAINTAIN_MULTI_OW -- Debug through the complete FM.
3. CRM_ORDER_PREPARE_MULTI_OW -- The data is set in this function module.
Regards
Dedeepya C -
Issue in creation of plant related data at receiving server using BD10
Hi all,
This is regarding Material master creation using B10.I am using MATMAS05 message type for sending data from one system to another.Data is sent and received successfully.When i go in mm03 i can see all the views created successfully accept views related to PLANT.Please guide to resolve the issue.
When i entered into Log-
1)"The field MBEW-BKLAS is defined as a required field; it does not contain an entry".
2)"No material master data exists for material AB_08.04.09(30) in plant 4001".
My segemnt is as follows-
ZMATMAS05 matmas05
E1MARAM Master material general data (MARA)
Z1KLART KLART----
My extention
E1MARA1 Additional Fields for E1MARAM
E1MAKTM Master material short texts (MAKT)
E1MARCM Master material C segment (MARC)
Z1AUSPM E1AUSPMDistribution of Classification:----
My extention
E1MARC1 Additional Fields for E1MARCM
E1MARDM Master material warehouse/batch segment (MARD)
E1MFHMM Master material production resource/tool (MFHM)
E1MPGDM Master material product group
E1MPOPM Master material forecast parameter
E1MPRWM Master material forecast value
E1MVEGM Master material total consumption
E1MVEUM Master material unplanned consumption
E1MKALM Master material production version
E1MARMM Master material units of measure (MARM)
E1MBEWM Master material material valuation (MBEW)
E1MLGNM Master material material data per warehouse number (MLGN)
E1MVKEM Master material sales data (MVKE)
E1MLANM Master material tax classification (MLAN)
E1MTXHM Master material long text header
E1CUCFG CU: Configuration data
E1UPSLINK Reference from Object to Superior UPS
Thanks.
Edited by: sanu debu on Apr 27, 2009 7:10 PMCREATE CONTROLFILE SET DATABASE "NEWDB" NORESETLOGS ARCHIVELOGAlso when you are setting a new database, the option should be RESETLOGS and not NORESETLOGS.
'D:\APP\ADMINISTRATOR\ORADATA\NEWDB\ONLINELOG\O1_MF_2_7FK0XKB8_.LOG
D:\APP\ADMINISTRATOR\ORADATA\NEWDB\DATAFILE\O1_MF_SYSTEM_7FK0SKN0_.DBFWhy underscore(_) at the end of the datafile name. Any specific reason ?
Maybe you are looking for
-
Kernel Panic after 10.7.3 Combo update, help!
Hi everyone, I installed 10.7.3 (combo) from 10.7.2 yesterday on my Mac Mini and everything was smooth-ish, a bit of slowness here and there. Today my Mac crashed completely, I couldn't Force Quit the app I was in, nothing. So I held down the power b
-
Three monitors with Advanced Minidock T400
Hello, I recently purchased the ThinkPad Advanced Mini Dock (250410U* - United States). I have two 24" monitors that output 1920x1200 resolutions. Was wondering if there are any new drivers that allows the T400 to display images on both monitors in a
-
How do I save a picture off the internet and where is it stored?
I wish to save photos people post on the internet or in Facebook but I don't know how to. I am new to Mac computers. Could someone please tell me how to do this and when they are saved, where can I find them? I don't see anything new in iPhoto or
-
My Artisan50 works in this configuration currently!
-
Editing magento blog in dreamweaver
Hello, I would like to create a blog for www.minhoticaonline.com.br and was wondering if anyone managed to use dreamweaver to edit/tweak the blog of a magento shop? tks