0ANSALARY problem - BEx Query

Hi All,
I have a BEx Query which Uses 0EMPLOYEE & its attributes. 0ANSALARY is one of the attributes that Iam using in the Query. I have created a Role and assigned a Test User and this Query to the role.
The 0ANSALARY appears as ANSALARY in the query when I open it with the Test User's ID, but it appears normal when I open it with my ID. System says that the Query is syntactically correct too. When I execute the Query from the Test User's ID the 0ANSALARY does not get displayed at all in the result. It looks fine when I run the query with my ID.
what could be the problem for this strange behaviour and where should I look to resolve this problem? Please let me know.
Regards,
-Ravi

Hi, I have this in the Rows (the Query does not have colums as I have merged them). And, I have not used any Template to design the Role.
Any ideas?
Regards,
-Ravi

Similar Messages

Problem Bex Query Designer

Hello,
Our BI guys are facing a problem with the too - Bex Query Designer.
They want us to update the version of the Query Designer.
Can you please guide me as how do I obtain the latest version of Bex Query Designer.
My current version is - release 2004s SUpport pack - 0, revision 418
Thanks.

have a look at this
SAP NW BI BEx Compatibility of MS Operating Systems and Office Products [original link is broken]
Regards,
Ravi

Problem with Queries Structures in Bex Query Designer and Universe Designer

Hi everyone,
I have a problem when i try to do a Universe from a Bex Query Designer.
When I use a Characteristic Restrictions in a Structure, the universe only show me the structure without the objects inside it.
EJ:
1) Bex Query Designer
Colunms
(Structure) ZSRT_123
                      - (Characteristic Restrictions) Reg Guayana
>          (InfoObject)     0Product = 'XXX'
>          (InfoObject)     0Country = 'YYY'
     - (Characteristic Restrictions) Reg Caracas
>          (InfoObject)     0Product = 'AAA'
>          (InfoObject)     0Country = 'BBB'
Rows
(Structure) ZSRT_456
               (Key Figure)     Net Sales
2) Universe designer
(Class) ZSRT_456
>(Measure)      Net Sale
(Class)     ZSRT_123
>(Dimension)      ZSRT_123
The universe dont translate the two Characteristic Restrictions in the structure ZSRT_123.
Any information would be much appreciated. Thank you.

Hi,
I assume that you are using BOE XI 3.1 SP2.
We have added an option in SP2 to generate or not the L00 level.
Unfortunately this option applies not only on characteristics but also on hierarchies, hierarchies variables and structures: that's the reason why you have no elements belonging to the structure generated.
I recommend to always generate L00 in order to have your structure generated correctly.
This issue will be fixed in SP3.
Regards,
Didier

Problem while opening Bex query on the web

Hello BW experts,
I have a problem while opening Bex query from my SAP Favorites.See below.
When i double click on the query, i get the following page, with the server name KBWS01QX.
But, from RSRT Tcode, select the query > query display as HTML > Click on ABAP Web , click execute as shown below, it is going to the correct URL as in the 2nd screen shot below.
My question is why is it going to the wrong URL when i open it from SAP Favorites menu?
I want it to open the same URL as it opened from RSRT(which is the right one)
What is the Config needed to make it to work from SAP favorites.
Any help would be appreciated.
Thanks alot.
SV

Hello,
Thank you all for your responses.
See below some additional info.
From RSRT, this time I clicked on JAVA WEB, and i get the below URL, which is the same URL i was getting when i executed the query from SAP favorites.
http://kbws01qx.xxxxxxx.com:50000/irj/servlet/prt/portal/prtroot/pcd!3aportal_content!2fcom.sap.pct!2fplatform_add_ons!2fcom.sap.ip.bi!2fiViews!2fcom.sap.ip.bi.bex?QUERY=ZCONSUMPTION
Also, i have executed the Function module : RSBB_URL_PREFIX_GET and i get the below values.
It seems that it is trying to connect to Java portal something services may be, but i want it to open in ABAP web only.
Please help.

Problem about printing special character in bex query analyzer

Hi,
in bex query analyzer i have created one restricted key figure , in which i have substracted two date with the help of replacement path.
So i got result.
But i am facing one problem. when in both date, if one date is null or # then it is giving some big value like -734567.
But i want some special character like X instead of this big values.
So how can i do this?
With the help of if and else it can be done.
But how can we print special character in report.
Please help me
Thank you in advance

hi,
You cannot show X in a formula result. You can highlight the row using exception.
Still if you want to show X in the result then you need to create a formula variable on a char which returns X value all the times.
Then you can use the three formula variable to write a formula so that it shows the difference:
date1 -- formula variable
date2 -- formula variable
charx -- formula variable.
the formula will be
Count(date1)Count(date2)(date1 - date2) + charx *(count (delta(date1) + delta(date2))).
this would return the X value if any of the dates are empty otherwise their difference.
regards.
Arvind.

Problem in BW system while tranporting a change in a Bex Query

Hi All,
I am facing a problem in BW system while tranporting a change in a Bex Query. Actually on our BW system our Client team works as well. I have done started doing some change in query in dev. I have created bex transportable request
I want to transport a change in bex query. I am doing that dev work. usually i create a request in RSA1->tranport connection-> drag a query to a bex transportable request which I have already created. But the problem is my client also want to work on the same query for another change. so he is asking me to release the request or delete the request.. Is there any otherway that I can do the transports without conflicting with Client.
Regards.
haaris

Hi Harris,
A transport request if is BEx transport request (i.e. a request which is assigned as BEx transport request in transport connection) allows multiple users to work on same query.
Instead of deleting your request, you could assign it as a BEx transport request in transport workbench and your client can also make changes under the same request without adding him under the request. It will also be better as all the changes made to one query will be onder one request.
Please let me know if you need any more help.
Regards,
Pankaj

Problem with a Bex Query Report with Web Intelligence

Hello!
I have a Bex query (with query Bex version 7.0) I'm connecting with Web Intelligence (4.0) but one of the attributes instead of displaying the description shows only the key, and it is strange because other cubes if given by the conversion.
I wonder if there is a solution for this or if it is a problem of version 4.0 of Web Intelligence.
I await your response,
Greetings!

Hi,
Whereabouts in the application are you seing this problem? (in the query panel conditions, in the prompt list of values, or in the table block? )
also, what do you mean by "and it is strange because other cubes if given by the conversion" ?
it's worth noting that the "key and text display properties" in the Bex Query Designer do not influence webi. WebI consumes the global infoobject property from BW RSH1.
Regards,
H
p.s. if you need to understand which features are or are not supported with BI 4.0 tools, please look here: http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/d056e1bc-2794-2e10-959e-8779c5623cc5

BEx Query Designer Opening Problem

Hi Guys,
I am working on BI 7.0. My system OS is Windows XP. When i try to open Query Designer it showing an as below.
Component 'BEx Query Designer': available version 154, version 229 required.
Before you can continue you have to run the front-end setup.
please let me know to resolve this issue.
Thanks
Murali

Hi Murali,
To make sure it works, you should make sure that:
When you installed the SAP GUI, you have checked the BI option (in addition to the BW option)
Install the latest front end patch (BI patch 7) from SAP Marketplace
I highly recommand to also install the BI SP07 patch for the server - it adds lots of stability for the front end.
It works pretty well for us, I am sure you will also eventually make it work
hope this solves ur problem....
Regards,
Bala...

Input control -Check Box Problem in webi4 over Bex query

Hi All
i am in webi4 over bex query
my customer requirement is to have the option to select multiple values from object (e.g Document class) with out the need of presenting the field(e.g document class) in the report
when I use the input control check box or list box i have the following problem
if I select from the input control all values I see the report ok
if I select 2 values from the list I receive #UNAVAILABLE , but if i add the field to the report ( the document class) it works fine.
the problem is that if I don't have the field in the report i get the #UNAVAILABLE
any assistance is appreciated
Thanks

Hi,
this question has been asked many times before on this forum, so do please search first.
Here's some steers : http://forums.sdn.sap.com/thread.jspa?messageID=10852102#10852102
and : http://forums.sdn.sap.com/thread.jspa?messageID=10838993#10838993
Also, do search the knowledge base articles over here in the cross-search: www.service.sap.com/xsearch
you keywords would be "4.0 webi #UNAVAILABLE" (there are 12 sap notes about this)
Finally, make sure you use all the latest Patches (Patch2.11, 2.12 next week) to include corrections.
Regards,
H

Crystal Reports - Problem with too long BEx Query technical variable names?

Hello!
I have Crystal Reports 2008 SP3 and the SAP BO Integration Kit XI 3.1 SP3 installed and want to access a BEx query on a BW system within my Crystal Report.
The problem is that the name of the BEx variable is not displayed correctly (just "[]" is displayed for the variable name) as a parameter within Crystal Reports when I import the query. Furthermore I can't navigate through the fields of the query within Crystal Reports.
The technical names of the BEx query-variables have a length of 12 characters.
The interessting thing is that if I change the technical names of the BEx query variables to a maximum length of 8 characters everything works fine.
I use the SAP toolbar within Crystal Reports 2008 to create the report and have the "MDX-driver"-setting selected.
Has anyone ever had the same problem? Any suggestions?
I don't want to change the technical names of the variables of my queries...
thanks,
Dominik

Hi!
Just fixed the problem: The "Transports" for the Integration Kit had to be imported at the BW-System
regards

Problems about query filter (BEx).

Hello there,
I have some problems about query filter (BEx).
I have master data and I want to use attribute in this master data to dynamic filter in query(BEx).
But this attribute is key figure. I can't done it now. TT
Is this possible? If yes, could anyone advise how this is to be done?
Thanks in advance.

Hi
In BEx there is option as 'Exceptions' & 'Conditions'. If you go in condition, you can specify range for key figure output. This is either predefined or by user selection. You create the condition as per your requirement & it will show you filtered data.
How to create conditions you will find easily on this site.
You can create as many conditions as no of filters you want. You can create these at query level also at report output level.

SAP BW ,BEX query,Infocube with the universe problem

Hi gurus,
Plz throw some light....
1. Now i can create the universe on the top of each bex query,but how to select 2 or more query in the singel universe itself.Because this leads to me to create lot of universe.

2. I dont have option to select the infocube..how i can select the infocube???only folder is there,when i click on it,bex query is there,but how to select the INFOCUBE??

3. In the particular folder(infocube) itself i cant find the all the bex query available...for eg:i have 20 bex query in SAP BW but i see only 5 querys in universe...
plz guide me gurus...
santose

Hi,
This is a normal behaviour.
Please have a look on the deffierent Universe's guides:
[Designer's Guide|http://help.sap.com/businessobject/product_guides/boexir31/en/xi31_designer_en.pdf]
[Using SAP BW in Universe Designer|http://help.sap.com/businessobject/product_guides/boexir31/en/xi3-1_sap_olap_universes_en.pdf]
Moreover please have a look on SDN documentations:
[OLAP universes best practices|http://www.sdn.sap.com/irj/boc/index?rid=/library/uuid/c0a45246-ce76-2b10-e688-f5c8206203eb]
[Best Practices. Web Intelligence XI 3.x on SAP NetWeaver BI |https://wiki.wdf.sap.corp/wiki/display/globalregions/BestPractices.WebIntelligenceXI3.xonSAPNetWeaver+BI]
[OLAP Universes - how to samples and recommendations |https://wiki.wdf.sap.corp/display/globalregions/OLAPUniverses-howtosamplesand+recommendations]
Regards
Didier

BEx Query Designer - Url openining problem

Dear All,
While running a BI query through BEx Query Designer, it is generating portal URL as:
http:///irj/servlet/prt/portal/prtroot/pcd!3aportal_content!2fcom.sap.pct!2fplatform_add_ons!2fcom.sap.ip.bi!2fiViews!2fcom.sap.ip.bi.bex?QUERY=ZTEST_Q0001&VARIABLE_SCREEN=X&DUMMY=20
have created source system and all RFCs required as running properly.
Any ideas further please ??
my usage type is as below
Active Usage Types
Product Name      UT Code      Short Name      Description      Activation Date      Configured
SAP NetWeaver 2004s      BI      BI Java      BI Java      Mon Aug 11 00:00:00 IST 2008      YES
SAP NetWeaver 2004s      AS      AS Java      Application Server Java      Mon Aug 11 00:00:00 IST 2008      YES
SAP NetWeaver 2004s      EPC      EP Core      Enterprise Portal Core Components      Mon Aug 11 00:00:00 IST 2008      YES
SAP NetWeaver 2004s      EP      EP      Enterprise Portal      Mon Aug 11 00:00:00 IST 2008      NO
SAP NetWeaver 2004s      AAS      AS ABAP      Application Server ABAP      Mon Aug 11 00:00:00 IST 2008      YES
Please correct me where to configure default host name
Regards,
Ravi ghangurde

Dear all.
Below are the details probelm .
i want to open the portal nwa using url "http://10.2.202.154:50000/nwa" but it's ask me username and password screen , when entering J2EE_ADMIN user and correct password next screen is not appears
and same user name and password screen shows again.
when putting worng password it's show authontication fail message.
Below are url details after providig the correct password.
http://10.2.202.154:50000/logon/logonServlet?redirectURL=%2Fwebdynpro%
2Fdispatcher%2Fsap.com%2Ftc%7Elm%7Ewebadmin%7Emainframe%7Ewd%
2FWebAdminApp
in morning it was showing the nwa screen when loginig with path
http://10.2.202.154:50000/nwa and j2ee_admin and password
but we are only change sso tiket parameters in default profile and create tiket in visual administrator.
after than i am not able to open the portal NWA
i want to run post installation wizard for BI post installation please suggest to open the NWA.
is any other way for BI post installation wizard
Regards,
Ravi Ghangurde

Problem in consuming BEX query (MDX/Easy Query) in netweaver gateway Odata model

Hi while accessing the the Odata Service URL i am getting the XSLT Runtime error "No Valid Source context supplied" (CX_XSLT_RUNTIME_ERROR). The landscape is SAPUI5 application consumes the bex query as mdx query via Netweaver gateway odata model. Please refer the attached screenshot for details. Thanks, Ganesh.

Issue resolved by setting flags in alias. Ganesh.

Problem with bex query listing sales "this month" and "same month last year

Hi,
I've created a query in BW BEx, where I have a mandatory variable for 0calmonth, and I list 0material and sales (in volume, liter). And I have a restricted key figure giving me sales (volume in liter) restricted with 0calmonth = variable - 12, to give me the sale for the same month the user select, previous year.
This seems to be working, the sum is correct, but when adding up the number for the sales in the month previous year, the numbers does not fit the sum in the end.
I think the report only lists materials with sales the month selected in the variable, if a material has not been sold that month, but in the same month last year, it's not listed in the reports, but it's added in the sum in the end.
Example.
We have three records like this:
material - calmonth - volume
101 - 01.2010 - 5
101 - 01.2011 - 8
201 - 01.2010 - 7
The report will give the following (calmonth variable = 01.2011)
Material - volume this month - volume same month last year
101 - 8 - 5
Sum 8 - 12
Any way to solve this issue? We noticed because we run BO - Webi on top of the BEx query, and BO sum's the values per material, and in webi the report would give us the sum 8 and 5.
Any input is appreciated.
Regards,
Øystein

Hi,
thanks for your reply.
The error is that the report only seems to list materials that has been sold "this month", and if the same material was sold the same month last year, it will also list the volume for this.
But if the material is only sold in the same month last year, it's not listed in the report, but it's calculated into the sum at the end.
The report is listing material, which is why the error presents itself, as you said
Getting 8 minus 12 is correct unless you drill down by material. In that case, it should be 8 minus 5 and 0 minus 7.
The row with 0 - 7 is not shown, and my guess is that the report will only list materials that has sales this month (which has been selected in the variable)
Regards,
Øystein
Edited by: Oystein Gundersen on Mar 21, 2011 4:36 PM

0ANSALARY problem - BEx Query

Similar Messages

Maybe you are looking for