0calday data required

Hi GuRUs,
I added 0calday in (0FIGL_O02) ODS and scheduled it.
but i am not getting data for 0calday.
i am using this ODS for infoset and creating report where i want to use 0calday.
looking for your suggesion to fill data for 0calday.

HI SSMS,
0CALDAY is a standard characteristic, available to you so that you are able to Analyze the data being loaded into BW with respect to this Time Characteristic.
So , to be able to do so you need to Load Data into this. What time Charcateristic you map with this depends on how your business would like to Analyze the data for example : If your business Calculates the Total Sales Value based on the Posting Date , then to be able to analyse the Sale you would need to Map the Posting Date with this, some business would like to look at the data based on Document date etc etc.
Regards,

Similar Messages

Error 1074395241: The template descriptor does not contain data required for rotation-invariant matching.

Hello all,
I am using the IMAQ Match Pattern 4 to detect the rotation angle of a template image. However, it shows the error: "Error 1074395241: The template descriptor does not contain data required for rotation-invariant matching." What is the problem exactly? How to solve this? The details are explained below.
My project is a little bit complicated. Part of the block diagram containing the IMAQ Match Pattern 4 is shown below:
The source image is a series of frames of images read from an AVI video (I used a for loop to process the images frame by frame). The template image is a selected region of the first frame. So it means, the user selected the object of ineterst in the first frame of the video, and in each of the following frames, we need to find the matched object of interest & determine its rotation angle. When I run the block diagram shown above, it does not have any error. However, it shows the rotation angle as zero no matter what it "really" is. Therefore, I changed the block diagram by adding the parameters, shown below:
But in this case, when I run it, it shows the error that I have indicated in the subject line.
If you need more details about my project to identify the problem, please let me know.
Thanks in advance.
Solved!
Go to Solution.

-Please go through pattern matching example which comes along with labview fiirst
Go to labview Help>>Find Examples and you can search for example.
-You have create template with angle range and what type of pattern matching you want use.
-For this you have to use IMAQ Learn Pattern before using IMAQ Match Pattern 4
Refer :http://zone.ni.com/reference/en-XX/help/370281U-01/imaqvision/imaq_match_pattern_4/
Thanks
uday,
Please Mark the solution as accepted if your problem is solved and help author by clicking on kudoes
Certified LabVIEW Associate Developer (CLAD) Using LV13

You do not have permissions to access a database that contains data required for this form to function correctly.

I have dropdown on infopath form , and it receives data from sql server table , it works fine when i am running in preview mode , but when i am publishing form to sharepoint server and loading that form
i am getting this
You do not have permissions to access a database that contains data required for this form to function correctly.
Can you please help?
Thanks,

try this one, if not yet
Convert the data connection to UDC (store it in a Data Connection Library within the same site collection as the form library). See if this works without any other changes, but if not, then...
Manually edit your UDC file in Notepad (or your preferred editor) so that the authentication line is not commented out and so that it references the name of the SSO target app you created.
For Type, use NTLM.
Ensure the user has rights to access the database
Also ensure the connection file has been approved - A sharepoint admin can access a non approved Ucdx file. Go to the connection library and approve the file
Also check this post having the similar issue:
http://social.technet.microsoft.com/Forums/en-US/3196bafd-4bc3-40ab-ac2b-d149d1c3e0fa/sharepoint-2010-error-you-do-not-have-permissions-to-access-a-database?forum=sharepointdevelopmentprevious
Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog

HCM Time and Attendance - data requirements

Can anyone help with what data is required from an external time and attendance collection application.
E.G. First Name, Last Name, Emploee Code, Location, Clock in, Clock out and the big one is an 'hours calculated' data required?
Regards
Ray

you would some javascript to refresh
but this works in standard without doing any extra coding
or yoiu can check this
The flag event.target.dirty should be set to true at an appropriate
position (probably form:ready event) for adobe reader versions < 9.
Given below is a sample (javascript):
if ( xfa.host.version < 9) { //handles 8.x.x and previous
event.target.dirty = true;
ie
During the initialization of a PDF form, Since 'dirtyState' is a
property of Reader, and when we open a PDF form, reader would set that
property as "false" automatically. That's why the dirty state could not
be changed to true in some event (like, initialize or Form:readey).
Inorder to set the dirty state to ture, we need to set it after the
initialization of the PDF form. Otherwise, the dirty state would be set
as false during the initialization by default.
The solution would be that they could try this script :
ContainerFoundation_JS.setGlobalValue(event.target, "saveDirtyState",
true);
SaveDirtyState is a property used by ZCI code to judge if a PDF form is
dirty or not.

Test Data Required for Bapi's

Hello All,
I am a newbie to SAP.
I have been tasked with finding the test data for a few BAPi's but have been unable to do so on my own.
I have tried using the respective transactions to find valid test data and have looked at all the imports, tables in the given bapi but have been unable to find the required data.
I am working on ECC 6.0.
I ask all the learned folk out here to please lend your expertise.
The list of BAPI's are :-
1. BAPI_FUNCLOC_GETLIST
2. BAPI_CONTROL_RECEPIE_GET_LIST
3. BAPI_PROCORDCONF_GET_HDR_PROP
4. BAPI_PROCORD_GET_LIST
Edited by: aashrith on Nov 13, 2011 5:03 PM

I suspect that they want you to build some test data rather than find some. And for what you need, there is a lot of master data required. It may or may not be there already, but the task you have defined is not that simple as one or two posts would be required. I would google "SAP PPPI test data" or something similar. You will probably find simple lists of tasks to build a sample Control Recipe or Process Order.
Regards,
Mike

Error: "Depreciation start date required in old assets data (please enter)"

When , I use transaction AS91 , for an asset , with book depreciation key = 0000, the system shows this error:"Depreciation start date required in old assets data (please enter)",
somebody could help me with this please?

Check if the depreciation start date has got populated in the tab for depreciation areas in AS91.
Usually this gets populated based on capitalization/creation date.If not then try to enter this manually.
Thanks and regards
Kedar

Data required by Export Accounts for Container Freight payment can be downl

Dear Gurus,
Data required by Export Accounts for Container Freight payment can be downloaded through a standard query.
Pls help its urgent.
Regards
Mahesh K singh

hello, friend.
are you using LE-Transportation? if yes, there are some helpful t-codes such as VI11 and VI12. you may also use t-code SQVI for queries, but you would have to know what tables to look for.
hope this helped even if a bit. reward, even a little if yes.
thanks and regards.
jty

Master Data Required for 2LIS_02_HDR Data Source Installation

Hi All,
We are trying to install 2LIS_02_HDR DataSource through BC for our purchasing implementation . Can you suggest what all the Master Data required for this Data Source.
Regards,
Aditya

Hi ,
Please see this link.
http://help.sap.com/saphelp_nw70/helpdata/en/ed/62073c44564d59e10000000a114084/frameset.htm
http://help.sap.com/saphelp_nw70/helpdata/en/ed/62073c44564d59e10000000a114084/frameset.htm
In the same page you can find all details.
Hope this helps.
Thanks
CK

Gnome-games-extra-data: requires gnome-games

Getting the following error when trying to upgrade:
error: failed to prepare transaction (could not satisfy dependencies)
:: gnome-games-extra-data: requires gnome-games
I removed gnome-games-extra-data
sudo pacman -R gnome-games-extra-data
and upgrades seem to be going fine now. I have never played a single gnome game any way, so even if I broke something, I'll probably never notice.

I figured it was something to do with either gnome or gdm. I have a couple other machines that I haven't yet upgraded and will have to go through this. I wonder what the deal is with GDM?
Unfortunately I didn't have time to troubleshoot at work and just booted to an opensuse 12.3 KDE CD I was given to try out. First time for both opensuse and KDE for me.
If I figure out anything else concerning GDM I'll post back.
mgeiger wrote:
Hey sensorsmile,
I got the same behaviour after updating today. After trying out a couple of things I found out, that my GDM is broken.
Here's what I did to get my machine running again:
1. when grub screen appears press "e" to edit the additional commands.
2. after "ro quiet ..." enter "single" to make the kernel boot only into the console and avoid GDM.
3. boot with F10
4. login in terminal mode
5. as root type "systemctl disable gdm"
6. install slim (read about it in wiki, especially the part with xinitrc)
8. as root type "systemctl enable slim"
9. reboot
Well I don't know if you're using gnome, but if so, you can try these steps. good luck

Csbp Data Required

anyone help me regarding csbp Fi Asset accounting data required to me

Hi Eshwar,
The masters will be:
MATERIAL MASTER
BOM
WORKCENTER
ROUTING
you'll be given As Is document from the customer. It contains their business process, which you will be mapping with SAP std processes.
plz let me know if you want to know anything in specific......
kindly award points if this info helps

Minimum data required

Hello, Is there a minimum of data, required to be loaded in Demantra for an accurate forecast?
Thx

Hi dcro,
Before answering about the amount/ volume of data needed for accurate forecast I would like to shed some light on the working of the Analytical engine.
There are two phases an analytical engine goes through viz learning stage and forecasting stage.
In the learning stage the analytical engine identifies the repetitive demand patterns that needs to be considered while calculating the figures in the forecasting stage. In the forecasting stage the engine applies the lessons learnt in the learning stage along with the causal factors to generate the forecast figures by using one or more statistical models.
While trying out the statistical models on the nodes for forecasting, the analytical engine checks out for the minimum and maximum history periods defined for the model to be applied. If the amount of data for that node falls outside this range (min-max history period) then that particular model is not used for forecasting.
So in short, the forecast might be generated even if you dont have sufficient history but the accuracy might not be good enough. Likewise, even after having considerable amount of historical data, the accuracy might be poor if sufficient demand pattern is not seen in it.
So to comment on the exact volume of history needed for accurate forecast generation will be a topic to debate on.
Regards,
Shekhar

Data required from plant

Dear all,
What kind of pp-master data required from plant while implementation of SAP ???
Ishwar

Hi Eshwar,
The masters will be:
MATERIAL MASTER
BOM
WORKCENTER
ROUTING
you'll be given As Is document from the customer. It contains their business process, which you will be mapping with SAP std processes.
plz let me know if you want to know anything in specific......
kindly award points if this info helps

Which all tables suffice all line item GL data requirements

Please clarify this requirement for Line Item Data from New GL. my client BMW Inc have configured New GL in ECC 6.0 if i pull all the records to BW from FAGLFLEXA (Line Item Table) is that sufficient to meet the all line item GL data or is there any other tables missing that also shall be combined to bring the Line item GL data. Please help me for this if u can check with any of your friends in FICO.
2. I have seen that BSEG AND BKPF are used earlier in old FI versions so what is there now in New GL ECC 6.0 that will suffice for these BSEG AND BKPF or still i have to pull records by using these tables. for GL Line Item Data.
If you can help me to give the short overview of New GL posting process it would be great.
Thanks
Regards
Soniya Kapoor

Hi Soniya,
FAGLFLEXA & FAGLFLEXT would contain all FI line item
http://help.sap.com/saphelp_erp2005vp/helpdata/en/a8/e26840b151181ce10000000a1550b0/content.htm
Pls assign points as way to say thanks

Req Deliv. Date required on order create VA01 Copy with Reference to Quote

When creating an order with reference to a quote, the screen allows Req Deliv Date entry. I would like to make this field mandatory on the window 'Create with Reference'. Program is SAPLV45C and the screen is not certain: could be 0100, 0301, 0302, 0303, 0900.
Have been looking at maintenance via SE51, but not sure if any of the element characteristics translate into 'required' so user is unable to click "Copy" if the date is without a value.
Thank you.

It is possible by changing the SAP standard.
You can change the special attirbutes (Tick the checkbox in Req. field) in elements list of each screen which you have mentioned through SE51 transcation
Regards,
Udayasankar Rajagopalan

WO basic start date - requirement date

Good morning folks,
Would anyone be able to shed some light on any config that would be suitable for the following:
The materials are assigned to a task list that is then assigned to a plan. That plan is then scheduled and the work orders are generated.
When the materials are added to the work order their requirement date is automatically assigned as the work order basic start date - can this requirement date be pulled from the scheduled dates instead?
The problem is that the material may not be required at the beginning of the WO, so the defaulted basic start date of the WO would not be the way forward.
Thanks
Mantas

hi Mantas
you can set in scheduling parameters with following possibilities
Path Plant maintenance and customer service->Maintenance and service order->scheduling->set scheduling parameter
1)The basic dates are adjusted and the dependent requirements are scheduled for the start dates of the relevant operations.
2)The basic dates are not adjusted and the dependent requirements are scheduled for the start dates of the relevant operations.
3)The basic dates are adjusted and the dependent requirements are scheduled for the order basic start date.
4)The basic dates are not adjusted and the dependent requirements are scheduled for the order basic start date.
so when you add the components you have to assign the operations,after selecting the operation you can change the operation date, after you change the operation dates,the material scheduled dates will be changed to the operation date
(using the option 1)
regards
thyagarajan

0calday data required

Similar Messages

Maybe you are looking for