0calday to 0fiscervariant

Hi ,
Can i map 0Calday to 0FiscalVariant ? The below is the message i am getting when i tried to do so.
"You have not maintained a rule for the fiscal year variant".
I have made the rule type as initial, but when i am trying to change its not allowing me to do.
-Sonti-

Hi Simon,
Your answer is correct. I didn't mentioned the Attribute there. That caused the problem.
It looks ok now, But i got this message.
"Source parameter 0COMP_CODE is not being used".
We r in DEV and no data is there yet, May be the reason for this.
-Sonti-

Similar Messages

Diff b/w sy-datum - 0calday

hi ,
i got a requirement that i need to show difference b/w current date and 0calday in report can any body help me regarding this

Hi,
If you want to get it in Reporting itslef, you have to take 0CALDAY into rows and have to take 2 Formula variables. One FV is a Replacement path varibale with Characterstic = 0CALDAY ,Replace variable with = KEY and dimenaion indicator = Date .And another Fv should be a Customer exit variable with dimenaion indicator = Date .
In the code for 2nd variable , you will simply asign sy-datum.
These 2 variables are used in the formula as FV1-Fv2.
With rgds,
Anil Kumar Sharma .P

Purchasing cube designing, update rule mapping for 0calday

Hi All,
Iam designing cube for Purchasing module in BW. Iam having doubt in mapping for 0calday in update rules, is it with document date or scheduline date. I have searched in SAP cube 0PUR_C01, it is mapped with 0SCHED_DATE( schedule line date). How the difference comes when we choose document date and schedule line date.
FYI, we are using only schedule line data source, which is giving relevant information.
Thanks,
Ram

Hi Ram,
Please note:
0SCHED_DATE: The schedule line date is the day on which the scheduled quantity of the material is to be delivered.
0DOC_DATE: The date on which document has been craeted.
Use the first one for purchasing.
Thanks...
Shambhu

In Generic Delta By selecting 0CALDAY?

hello all
In generic delta,if v select 0calday as a delta type,after selecting this delta type v need to select a field for this delta type,should v need to select Time field only(like Creation date,Last date of creation or something like) or other than Time field like select Matnr,Ername or something like this?
Pl let me know that?
regards
balji

My pleasure!!
The following document should be very helpful for you.. i lik this paper very much..
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/84bf4d68-0601-0010-13b5-b062adbb3e33
hope it helps..
regards,
Hari

Formula Variable with replacement path on 0CALDAY

Hi,
I am trying to enhance an existing query.
I am creating a new formula variable processing by replacement path.
In Reference Characterisitic I have choosen 0CALDAY.
In the tab options , I selected replacement path.
In the replacement path tab, in Replacement Rule /replace variable with I am trying to select the variable. But in the variable list I am not able to find 0CALDAY variable, which we have already created and restricting in some other key figures.
Please help me in this regard.
Thanks & Regards,
Madhav

Hey in the replacement path tab you need to choose either its infoobject or variable from which the value needs to be taken.
If you choose infoobject you get the options of choosing its attributes etc.
If you choose variable you get option to choose variable associated.
But under "General Tab" under reference characteristic you need to choose your CALDAY.
Hope this helps.
Edited by: Praveen G on Sep 26, 2008 5:53 AM

Error while loading : Time conversion from 0CALDAY to 0FISCPER

Hi ,
I get the following error when loading to an ODs .
My 0FISCPER is mapped to one of the date fields from the extractor (Document date) and also Have 0FISCVARNT as part of data fields .
" Time conversion from 0CALDAY to 0FISCPER (fiscal year ) failed with value 20060405 " .
thanks .

Hello CG
Please refere this forum
Time conversion problem
Thanks
Chandran

What are the variables available on 0CALDAY

HI EXPERTS,
I want to know the list of variables on a 0calday.How can i know?
Can i get this information for all the standard characteristics / time chars.?
Beacause ,when i open my query designer ,i see only few variables under the characteristic 0calday.
For example,
when user enters a date, i need to show him both entered date and entire months in next column.
so i need to find.Is there any SAP variable available already for this purpose?
I aslo have some columns.........etc,,
Can any one help. me..
Regards
Laxman

Hi Experts,
I want to extend my doubt a little more.
I have a requirment as below.
User will enter a range of Date say 01.06.2011 to 25.06.2011.
I need to show him data in two columns one cloumn for the entered day range and second column for prevoius month date rangei.e(01.05.2011 to 25.05.2011)
can i achive this without using Customer Exit.
Regards
Laxman

Problem in loading 0calday infoobject date format through Flatfile in cube

Hi All,
I am facing problem in loading the 0calday infoobject data through flat file( format - test.csv) in infocube..
Suppose consider we are having two flat files(test1.csv,test2.csv).
1.First file(test1.csv) has a proper date format (ie YYYYMMDD), while loading it is succesfully .
2.Second file(test2.csv) has improper date format(ie DDMMYYYY), loading fails because of this format..
Is it possible to write the Routine(Start Routine) in the Infopackage (External data-Tab) in such a way the if the flat file(test1.csv) is proper date format load calday data without any conversion, if the file is test2.csv convert the date field format from (DDMMYYYY) to (YYYYMMDD) and finally laod data in cube.
With regards,
Hari.
+91 9323839017

Hello Dinesh,Anil
There is no distinguishing field between the two flat file loads.
We are using only one infoobject(ie 0calday) for two loads.
We are using two external source system(one system generate file as YYYYMMDD date format,and another system generate date formate as DDMMYYY, here two file names are unique.
Here my requirement is i have to compare two file names using start routine of the package (tab:External data) .
if(test1.csv)
load as it is 0calday data (since it is in proper format YYYYMMDD)
else if(test2.csv)
then convert from DDMMYYYY to YYYYMMDD and load data to 0calday infoobject in cube.
Is it possible to compare two files names using start routine.
with regards,
Hari

How to determine 0calday from 0fiscper field ?

we have a requirement where the user will enter the calmonth variable in the user input, and need to get the amount for top 20 customer's on sales, in the report. The problem is we dont have calmonth in the infocube. we have only 0fiscper and 0fiscalyear , and -0calday.
0calday is mapped to the transaction date. No calmonth in the infocube and we cannot add it now. its too late.
The columns we need in the report are ( orange color are column names)
customer        YTD           DEC 2012 ( sales amount) ....for top 20 customers. like
customer 1      99999            900
customer 2      55555             200
customer 20      11111             234
sample data is as follows: ...what I want is user will input 0calmonth and 0fiscalyear. and I need to display the data for that month . Please advise how to achieve it. YTD - is 1st of jan of the current year till today's date right ? Irrespective of the user entry variable. Is that right ?

Now as per your suggestion, I have restricted Z_FY_INPUT to the KF, and created another ZYTD and put this as Z_FY_INPUT as replacement path and and put offshet as 2 to 4 on it.
Again i will clarfiy:
First selection--Revenue KF--Fiscper--variable--User input--Z_FY_INPUT--This selection will give the value of that period which user is entering.If user enters 004.2014 so it will give value for the same.Correct!
Now for YTD we need data from 001.2014 to 004.2014. correct..
A) Take the revenue KF--Drag and drop 0fiscper --Restrict--Show--Value ranges---Less than or equal to--Choose the variable Z_FY_INPUT.
B) Now again restrict the above selection with 0fiscyear--Create a characteristic variable with replacement path--Follow steps with screenshot as mentioned in the document.
So basically for YTD you have restricted with two variables based respectively on 0fiscper and 0fiscyear.
How this works let me explain that also.
In Part A i have restricted the kf with the same user input variable which you used in first selection but the range less that or equal to.
Till this stage if user enters 004.2014 then it will bring all the data which is less or equal to the user input which is not our requirement.We need data from the starting of the year upto user entered value.
In Part B we have restricted the same selection with replacement path variable on 0fiscyear--We are replacing it with variable entered by user.
So now this part will hold only the year i.e 2014..How--user entered 004.2014.
Internal format K42014004--Offset we have given 2 length 4..
Which gives 2014.
On combining both the parts we get data data from the starting of the year up to the user entered value.
I tried my level best to explain you how this works and believe me i have created YTD using the same method in so many queries and it really works as desired.
Regards,
AL

Dynamic variable for 0CALDAY

Hi all, this is my scenario:
I've created a query with input variable for characteristic Year/Month (0CALMONTH), in columns i added a key figure and in rows i added the characteristic 0CALDAY. The result looks someting like this:
Varibale entry: 09.2006
Result table:

0CALDAY | KYF
01.09.2006 | 1,000
02.09.2006 | 2,000
03.09.2006 | 1,500
30.09.2006 | 2,100
31.09.2006 | 2,350
Now, what i need is to add a column that shows the value of the previous day, so the result should be:
Varibale entry: 09.2006
Result table:

0CALDAY | KYF | Previous Day KYF
01.09.2006 | 1,000 | -
02.09.2006 | 2,000 | 1,000
03.09.2006 | 1,500 | 2,000
30.09.2006 | 2,100 | (value for 29.09.2006)
31.09.2006 | 2,350 | 2,350
I guess offsets will be the solution, but i need a variable (dynamic variable) to read the current day (0CALDAY) in the report... anyone knows how to do this? a customer exit can solve it (which code)? Please advice.
Thank you.

Thank you KJ for your answer, but unfortunatelly my knowledge in ABAP is very limited, ¿Do you happen to have an example so i can see how to customize it in order to read values from characteristic 0CALDAY?

Error while loading data into cube 0calday to 0fiscper (2lis_13_vdcon)

Hi all,
I m getting following error while loading the data into cube.
"Time conversion from 0CALDAY to 0FISCPER (fiscal year V3 ) failed with value 10081031"
amit shetye

Hi Amit,
This conversion problem. Calender not maintained for Fiscal variant "V3", for Year: 1008.
Maintain calender for year: 1008 and transfer global setting from soruce(R/3).
RSA1--> Source systems --> from context menu --> transfer global settings > choose fiscal year variants and calender> execute
Hope it Helps
Srini

Choose 0calday from calendar screen in BEx Web input screen

Hi Experts
Is it possible to present variable input screen for 0calday as a calendar in BEx Web? The possible dates should be presented as it is in BEx Analyzer.
Kind regards
Erik

Hi Erik,
Have you seen this:
http://help.sap.com/saphelp_nw04/helpdata/en/61/886b3ca681207ee10000000a11405a/content.htm
Hope this helps...

Query variables for 0CALDAY

Hello gurus,
   I´m trying to create a query variable that shows the last calendar day(infoobject 0CALDAY) in the previous year, current year, next year. I´m not finding these variables in Business Content. Does anybody know any variable for this? If I gonna need to create a user exit for this, where should I put the result of the ABAP program?
Thanks,
David.

Hello David!
Yes, you must create user-exit variable for this.
Go to transaction CMOD and find or create project with RSR00001 enhancement ("BI: Enhancements for Global Variables in Reporting"). After that edit ZXRSRU01 include in function EXIT_SAPLRRS0_001.
Add to ZXRSRU01 code for you user-exit variable. For example:
    WHEN 'ZB_DATE_LASTMINUS1'.
      LOOP AT i_t_var_range INTO wa_range WHERE vnam = 'ZB_FISCYEAR_M1S'.
      ENDLOOP.
      n4 = wa_range-low.
      n4 = n4 - 1.
      CONCATENATE n4 '1231' into l_s_range-low.
      APPEND l_s_range TO e_t_range.
in example ZB_FISCYEAR_M1S - variable for manual input on 0fiscyear characteristic.
ZB_DATE_LASTMINUS1 - user-exit variable. calculate last day for input year - 1.
Anton.

Non-cumulative cubes require 0CALDAY in Netweaver 2004s?

Dear all,
I just noticed, that under NW2004s you are not able anymore to activate a cube (containing non-cumulative data, like stock data) that does not contain 0CALDAY as a time characteristics.
So far our stock cube is only based on 0CALMON and I have not planned to change this. It worked for many years and I really do not need 0CALDAY in there...
Does someone know, why this has changed and whether I can do anything against it? Is there some kind of documentation or information regarding this change?
Thanks,
Andreas

Hi,
this happesn becuase non-cumulative aggreagte based on key date( ie.e values of the key figures till that date value) and if there is no key date given in the query then they take 0CALDAY as defualt key date.
Now in some cases the two cubes may be able to show the correct data becasue of aggregation happening on that level may bring the correct result but in some cases the date could be different and thats why the values are not macthing
Thats why it is not allowed to use more then one non-cumulative in a multicube.
Thanks
Ajeet

0calday master data missing for 2015

Hello
I am having a problem with 0calday master data.
How is this defined?
In the development system I can see that it is only contains values up to 01.02.2015.
How can I define this for future values as well.
I have an IP solution which opens up for time registration on every day. But since 01.02.2015 has passed it will not open up for entering data, since master
data is missing.
Where are these values maintained?
Thx for any input which can lead me to a fix of this urgent issue
BR
Lasse

Hi,
The problem also occurs in prod system
But strangely enough it works in Q system.
The difference between the system seems to be the length of 0calday masterdata, which is used to derive 0calweek (as of my understanding).
There is no regular flow for loading master data i 0calday. (not the same as for e.g 0customer with attributes, hierarchy, text ).
Where can I check the time horisont for which 0calday is defined? I find it strange that it for prod it ends at week 09.2015, for dev it ends at 05.2015 and for q it ends at 09.2018.
There queries and flows in BW is in-sync for all 3 systems.
You mention FI team. Could this problem originate from R/3 source system?
prod
quality

0calday to 0fiscervariant

Similar Messages

Maybe you are looking for