0CML_DELTA : Change pointers are not active

Hi All,
I have successfully did the delta init without data transfer for datasource 0CML_DELTA and 0CML_DELTA_CAP. Now, While trying to load delta, I am getting an error "Change pointers are not active" for both the datasource 0CML_DELTA and 0CML_DELTA_CAP.
The position datasources are fecthing 0 records.
I have activated the change pointers in BD61, even though I am getting the same error.
Anyone faced the similar issue or have any clue about the problem.
Thanks in advance,
Pravender
Edited by: Pravender on Sep 30, 2010 11:09 AM

I resolved it. I was activating change pointers in BD61. But fot CML we need to activate in SPRO--> SAP Banking --> Loans Management --> Basic settings --> Installation parameters ---> Define general installation parameters.
Then it will work.
Pravender

Similar Messages

Change Pointers are not getting populated in BDCPV table.

Hi All,
         I am trying to create IDOC for Activity type master - KL02 through change pointers. For that I have done following things.
Message type - COAMAS
1. Created Custom message type - WE81 - ZIN_COAMAS_TCSMOBILE
2. WE82 - Config for Mess Type and Idoc type combination
3. SCDO - Checked object type LSTAR and have required tables in that object.
4. BD61 - Activated Change pointers - Generally.
5. BD50 - Checked Active for ZIN_COAMAS_TCSMOBILE
6. BD52 - Added fields for I want to create Change pointers
7. BD60 - Message type and ref Mesage Type and function module config.
8. BD64 - Created distribution model for my Message type
After doing all this settings the change pointers are not getting created in BDCP and BDCPV tables.
Note - The entries are going in CDHDR and CDPOS table for activity which i change through KL02 for class LSTAR
Can anybody figure out what need to be done in this case?
Regards,
Gautam Joshi.

Hi All,
          Solved the problem myself.
          In BD52 I have given
          LSTAR               CSLA         KOARS
          LSTAR               CSLA         LSTAR
          LSTAR               CSLT          KTEXT
          Here the data of activity are stored in TCLA and TCLT tables. So intially while doing config in BD52 I have given TCLA and TCLT table names.
          But I debugged the KL02 and found that change pointers are not created for TCLA and TCLT table. further looking into CDHDr and CDPOS table I found that for COAMAS message type in these two tables table name was CSLAB.
CDPOS entry
LSTAR
3166442
119512890
*CSLAB*
2003166442   2400123120000101
KTEXT
U
--> BUT CSLAB is structure.
After putting these entry in BD52 the problem solved.
LSTAR     CSLAB     KOKRS
LSTAR     CSLAB     KTEXT
LSTAR     CSLAB     LSTAR
Regards,
Gautam Joshi.

Deletion change pointers are not going to ECC after C5

Hi,
My issue is that I am running C5 after Planning run.But deletion change pointers are not going to ECC.Because of this we have duplicate of orders in ECC.We are running CCR to bring back the "Planned orders with deletion change pointers and deleting again using RRP4.Why deletion change pointers are not going along with creation change pointer?Help will be highly appreciated.
Thanks&Regards
Venkadesh

Hi,
Check whether you have enabled the " delete events" check box. This check box will be valid if you are publishing the planning results thru background job.
If you set this indicator, the system deletes all selected change pointers without sending them first.
Thanks,
nandha

Change pointers are not generated when creating a material master

Dear Experts,
Change pointers are not generated when creating a material master.
However, when a change is made to the already created material, the change pointers are created according the fields in BD52.
Am I missing any settings?
I need to create change pointers immediately when I create the material master in MM01.
Please suggest.
Regards,
Shetty

did you follow the steps given in
http://help.sap.com/saphelp_nw73/helpdata/en/4a/6dcbe9c95261a3e10000000a421937/frameset.htm

RSSM: Checks Authorization Objects for Infoprovider are not activ

Hello,
we have BW 3.5 and we use RSSM Authorization Objects.
When we create a new cube with an Infoobject that is authorization relevant, in our development-system in rssm the flags for the checks are automatically activ.
When we transport the new cube to our production-system, the flags in RSSM for the authorization object are not activ.
Sometimes the new infoprovider is not in the list of the infoprovider in rssm, so we have to "update check status" with the appropriate icon.
My question:
It is possible, that when we import the new cube in our production-system, that all authorization objects are activ??

Hi,
Normally system would check all the authorization relevant objects whenever a new Info cube is imported and in case if you want to transport these changes to Production system manually then follow the below listed steps:
1) In Development system, check or un-check the authorization relevancy using the transaction RSSM on a given Info provider
2) These changes are stored in table RSSTOBJDIR
3) Create a manuall transport request and include these entries covering the required Authorization objects manually.
R3TR TABU RSSTOBJDIR
Ex: If Info object 'A' is authorization relevant in Development system but not in Production system and you want to transport this change to Production system then include object 'A' table entries manually.
Hope this helps.
Cheers
Bala Koppuravuri

Cant use colours in AI free version.stroke and fill options are not active either

cant use colours in AI free version.stroke and fill options are not active either

In the Trial version of Illustrator try this:
In the top right of your screen, choose 'Essentials' from the workspace menu.
Then from the same menu, choose Reset Essentials.
Next, click the Selection tool in the Tools panel (strip on the left side of your screen, it is the black pointer at the top).
Click on the object you want to change the stroke and fill colour for. Does it display with little handles around it (this is called bounding box)? E.g. can you tell it is selected?
You should see the Stroke and Fill options in the Control panel (top horizontal strip above your document), if the object you've selected is a path. But if for instance you selected as a placed photo, you won't see the Stroke and Fill options.
If possible take a screenshot of what you are trying to do, and we can be of more help hopefully.

When I am trying to sign in to iTunes Store. I am requested to enter a password to the wrong Apple ID mail which does not belong to me... I can't connect to iTunes store and my Viber and Facetime are not active.

My Apple ID was disabled. I reseted it successfully. Afterwards, when I am trying to update the pending apps in App Store on my phone, in order to sign in to iTunes Store I am requested to enter a password to the wrong Apple ID which definitely does not belong to me ('[email protected]'). Of course, I don't know this password and, consequently, I can't connect to Itunes Store on my Iphone. As a result my Viber and Facetime are not active in the meanwhile. What should I do? Thanks in advance for kind help and solution.

Where did you get this iPhone?
Was it new or second hand?
You have to sign out then sign in with the correct Apple ID and password.
Settings > iTunes & App Store > Apple ID: > do it here.

HT3149 iPhoto 09 When I click on the preview pane to move a photo into edit, it shows up black and the edit buttons are not active. How do I fix that?

When I click on the preview pane to move a photo into the edit pane, there is no image just a black square and the edit buttons are not active. A few images in an event will move to the edit pane but most will not. I cannot work with those images that do not enter the edit pane..no attaching to email, make a card, slideshow, etc.

There are several possible causes for the Black Screen issue
1. Permissions in the Library: Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Include the option to check and repair permissions.
2. Minor Database corruption: Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild.
3. A Damaged Photo: Select one of the affected photos in the iPhoto Window and right click on it. From the resulting menu select 'Show File (or 'Show Original File' if that's available). (On iPhoto 11 this option is under the File -> Reveal in Finder.) Will the file open in Preview? If not then the file is damaged. Time to restore from your back up.
4. A corrupted iPhoto Cache: Trash the com.apple.iPhoto folder from HD/Users/Your Name/Library/ Caches...
5. A corrupted preference file: Trash the com.apple.iPhoto.plist file from the HD/Users/ Your Name / library / preferences folder. (Remember you'll need to reset your User options afterwards. These include minor settings like the window colour and so on. Note: If you've moved your library you'll need to point iPhoto at it again.)
If none of these help:
As a Test:
Hold down the option (or alt) key key and launch iPhoto. From the resulting menu select 'Create Library'
Import a few pics into this new, blank library. Is the Problem repeated there?

My facetime and immesage are not activating. So should I upgrade my iPhone 4 from ios 6 to ios 7 ?

My facetime and immesage are not activating. So should I upgrade my iPhone 4 from ios 6 to ios 7 ?

You can try effetively

Some pages of my website are not active from the home page

Built my website with iweb. When I go to the site the tabs to all the pages show, but several of them are not active from the home page. If I go to one of the active pages I can then click on the other pages. Is there a way to fix this? I've tried reloading the entire site, but several of the tabs remain inactive from the home page. Any help would be greatly appreciate - Thanks, Jodi

Thanks Roddy - I tried moving it down and it didn't work - That line is in the Template I used to build the site and is on every page. I did finally get the command A to work, but there's nothing covering those bottom three tabs.
However, when I put my mouse in the area of the box where it has my name (the image you sent me above) it shows a link desktop/site/booker_files and I noticed I have one of the rss feed blue arrows, but I can't seem to delete it. I wonder if that has something to do with it. It does the same thing on the website if you hover with your mouse.
Truly appreciate your help.
Jodi

When I select my iPod touch in iTunes the buttons are inactive when I try to sort by name, artist etc. Also about half of the links under 'file' etc are not active.

When I select my iPod touch in iTunes the buttons are inactive when I try to sort by name, artist etc. Also about half of the links under 'file' etc are not active.

Further to my question, when I plug in and select my iPad 2 I don't have the same problem. I have restored the settings on my iPod Touch and updated both iTunes and iPod Touch software and restarted my iPod touch. Nothing has made any difference.

HT1688 I can not restore and upgrade my Iphone 4. When i plug in to computer itune's restore and check for update buttons are not active.

I can not restore and upgrade my Iphone 4. When i plug in to computer itune's restore and check for update buttons are not active. What is that mean?

Razmee,
Guess what? After posting, I read another thread on this topic where someone said they went to an Apple store and the tech person there added the optional username and password in the Outgoing Mail Server boxes, and then reset the phone again. Although I had tried resetting and restarting a few times today, I had NOT reset it after entering the username and password into the optional fields.
When I entered my username and password into the optional fields, the iPhone entered checks (ticks) to the right of every entry; it had not done this earlier. (I didn't reset at this time, and the outgoing mail would still not transmit).
So just now, I reset it and the outgoing email was sent!
Thanks to you and this forum, it's a great ending to a few frustrating days.
I hope this message helps others. Not only does everything have to be entered correctly in the respective boxes; but once everything is entered and you press the "Done" button, every box should then have a check mark next to it and then you must reset the phone.

Spelling and grammar buttons are not active

I can not use spelling check nor grammar check because when I go in to Preferences my grammar buttons are not active and i can not click on my choices. Can anyone help me?

Preference in Office Words
You should ask your question in the newsgroup run by Microsoft:
http://www.microsoft.com/mac/community/community.aspx?pid=newsgroups

Hierarchy monitoring detected that the ConfigMgr SQL Server ports 1433,4022, are not active on Firewall exception

SMS_HIERARCHY_MANAGER reports (Message ID=3353):
"Hierarchy Monitoring detected that the ConfigMgr SQL Server <fqdn> ports 1433,4022, are not active on Firewall
exception."
This is a fresh SCCM 2012 environment with no firewall active. SQL is installed on the same server as SCCM 2012. Is there a way to fix this without enabling the firewall?

Check this out
Issue:
ConfigMgr logs the error even though Windows Firewall is disabled or it is enabled and all exceptions are added to SQL Server(s).
Environment: I had an environment consist of a two node SQL Cluster hosting ConfigMgr database and a separate ConfigMgr primary site server
Resolution:
Windows firewall service must be started on both SQL nodes and ConfigMgr itself . As soon as the service is started exceptions for TCP 1433 and 4022 must be added to SQL nodes firewall.
After that the firewall profiles can be disabled using:
netsh advf set allp state off
This is true but if you disable the firewall even thought you have opened the Firewall port then disabled the firewall. The status message will continue to be generated and your site server will still be in an error state.
Notice that I said "disabled" and not "turn off".
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ

Update rules are not active

update rules are not active when transported to quality.
what can possibly be the error. where to check and correct this issue ?
thanks,
Amit

Amit,
In your update rules ,i hope there some start routine of update routines couls be there and those rotines didn't transported successfully .Check your update rules in DEV
Regards
Prasad

0CML_DELTA : Change pointers are not active

Similar Messages

Maybe you are looking for