0CO_ITEM_TX field needs to appear in the report

Hi,
I have a report which gets data from MULTI PROVIDER in turn from DSO 0CCA_O09 CO-OM-CCA: Actual - Line Items. This DSO has the field 0CO_ITEM_TX - but when I try to drag it in from dso to multi provider screen it disappears in the data fields of dso.
This Info Object is marked as attribute only and it gets errors when it is activated by unchecking the attribute only..
Please let me know how to make this field available in multi provider for reporting?
Thanks in advance
Anil

Roberto,
When I uncheck it and try to activate it it gives me errors:
EXCEPTION CX_RSRV_SID_CREATION_ERROR occured (Program:CL_RSDRO_GET_SIDS_FOR_ODSO====CP, include:
CL_RSDRO_GET_SIDS_FOR_ODSO====CM004,
I do not know if I give aclear picture, but if you can provide me ur mail ID, I can send you the screen shot of it. Thanks

Similar Messages

Lead time values are not appearing in the report for current year.

Hi friends,
Iam checking a report in production. where lead time values are displayed as 0 for 1 key figure lead time3 (w/0 dim) . i found there is a formula for this it shows like NODIM ( 'Lead Time 3' ).and there is a value for cal.lead time
how can i get values in the report.
Thanks ,
VRV.

Hi,
Although your question is not clear, I understood that the formula built on that KF is NODIM. Basically it means, units of measurement is not considered when calculating.
Eg: 5 Minutes + 5 Kilograms = 10
You please try to analyze your KF by the above logic. Then you would be able to figure out why the data is not appearing in the report..
Assign if helps...
Regards,
Suman

What are the mandatory fields needed to setup/register the SIP phone manually in CUCM

What are the mandatory fields needed to setup/register the SIP phone manually.Also, if someone can let me know the mandatory fields for Cisco based SIP phone and also the third party SIP hard phones like Avaya or any other Third party SIP phones both Soft phone and physical phone requirements...in CUCM
Please suggest...I need to know if MAC address is mandatory for all Cisco SIP phone to setup

http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/admin/7_1_2/ccmcfg/bccm-712-cm/b09sip3p.html
http://www.cisco.com/c/en/us/support/docs/voice-unified-communications/unified-communications-manager-version-70/112110-phone-add-00.html

A group by field needs to appear on every page of the report.

Hi.
My rtf template has a word header which is the report descriptn that appears on evry page. The report is grouped by business unit and then grouped by job description. The problem is the business unit appears only first time when it gets changed and then it does not repeat its value until the next BU comes up. I want to display the BU on each page even though the value is same (just like as a heading of a section). I used the follwing tags. The one in bold is to solve the issue of puting the BU descr on each page. But does not work. Anybodys help is greatly appreciated.
*<?fld_BUSINESS_DESCR?>*
<?for-each-group:row_CU_DET_STG;./fld_BUSINESS_UNIT?><?sort
<?fld_BUSINESS_DESCR?>
<?for-each-group:current-group()/fld_JOB_FUNCTION?>
<?fld_JOB_DESCR?>
Sid

Thanks alot Tim for spreading your expertise. That worked !!. I added the start and end body tag along with your solution of using the section with the group and it worked. Thanks alot again. However there is one prob now the page numbers are being reset and i dont want to reset it because the page numbers should continue in sequence till the end of the report despite of Business Unit change. Please any suggestion to solve this problem.
Edited by: user12107527 on Oct 27, 2009 6:50 AM
Edited by: user12107527 on Oct 27, 2009 9:06 AM

Transport of Query successful, but changes not appeared in the report

Hi All,
I have 2 Queries(Normal and Total stock reports on the same InfoProvider) in Prd.
For that User asked me to add one characteristic to Free characteristics.
I added one characteristic in Free Characteristics to both Queries in Dev and i collected the Transport requests for both the queries in RSA1->TRANSPORT CONNECTIONS and gave it to basis guy, he transported successfully to PRD and for both the reports the changes reflected in the
query designer, while executed the Normal stock report the characteristic added in free characteristics appeared and while drill down the data is coming, but for the Total stock report the changes appeared in Query designer but on executing the report even the characteristic added to Freecharacteristics is not appearing in Navigation Pane.
Also with the same technical name of total stock report there are 2 reports appearing in query designer. what to do now.
Help me here asap..
Thanks,
Chaitu.
Edited by: chaithu218 on Jun 21, 2011 10:37 AM
Edited by: chaithu218 on Jun 21, 2011 10:40 AM

Hi Chaithu,
As you mentioned that you can see 2 versions by the same technical name in designer for total stock report, it is highly probable that the query you are changing and the query you are executing are different.
2 versions of a query can exist with the same technical name as the system identifies the queries by their UIDs, which would be different for both these versions of queries.Following are the things you need to check:
1) In development system too, do you have 2 versions?
2) In production system, check the UID for both verions of the query
3) In Dev system, make sure you modify the query with UID which is being executed, if it is available there. Else, you need to replace the query in prod with the one you have in Dev system.
2 versions by same technical name can exist if:
1) Someone created a query directly in Prod, and transported a query by same technical name from Dev system
2) or due to system refresh, copy, etc.
Hope it helps.
Thanks,
Abhishek.

How to pull the date parameter to appear in the report template?

Hi Gurus, and Experts,
I need to pull the date parameter I selected in BIP to appear in my report template? How to code this in BIP?
Identifier are: dto and dfrom
date fromat string: MM-dd-yyyy
Regards,
JP
Edited by: user10955574 on Nov 10, 2010 2:38 AM
Edited by: user10955574 on Nov 10, 2010 2:39 AM

Declare the parameter in the template as
<?param@begin:param1?>
and use it as <?$param1?>

Field label not appearing in OIM Report Page

Hi,
Though this sounds like a silly problem, but I am not able to figure out what could be the problem.
I have created a new report in OIM and it is working perfectly fine as per the stored procedure. The only problem is that one of the label name is not appearing correctly in the report page display. It consists of the following fields:
1. First Name
2. Last Name
3. User iD
4. Custom field of the target application resource -say- abc.
In the xlWebAdmin.properties file, I added a new property for the custom field -
report.CustomReport.label.CustomField=abc
The same value has been written in the XML metadata of the report.
However, in the report page in OIM the label appears as - ???en_US.report.CustomReport.label.CustomField???
Please advice.
Regards.

Actually, we are getting a few errors while running the script and hence I was looking for any alternate, if possible.
java.io.IOException: java.io.IOException: /app/oracle/product/APP/10.1.3/j2ee/home/jsp/bin/ojspc: not found
at java.lang.UNIXProcess.<init>(UNIXProcess.java:148)
at java.lang.ProcessImpl.start(ProcessImpl.java:65)
at java.lang.ProcessBuilder.start(ProcessBuilder.java:451)
at java.lang.Runtime.exec(Runtime.java:591)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
It is unable to locate "ojspc" path. I am not sure as to where this path is referenced. I have to change it there, so that it refers to thecorrect one.
Regards.

SOME FIELDS SHOULD NOT SHOWN IN THE REPORT

Hi,
this is to inform you that, there is a requriment in reporting perspective (ALV),
Requriment:
i have to generate a ALV report which is viewed by our CFO with one t.code, in that report suppose there are 10 fields.
That is a specific report if some body apart from my CFO uses the same tcode to generate the same report than it has to display only 5 fields.
if my CFO uses the same t.code all the 10 fields must be visible.
please help me how to do it.
regards,
balajia.

There are couple of ways to achieve this,
1) - Create 2 variants, 1 variant for CFO with all the fields & 2nd variant with only relevant fields. Then use the authorization concept, where basis can restrict the access / execution of the report with specific variants.
From the basis view, they create role & assign this variants in one of the object ( not sure). Basis assistance required
2) - When developing report, write the validation for the respective fields such as maintain Customize table in which maintain userID's & fields which they can access. Display only those fields to the userID who executes this report. It should check this customize table for this UserID & only those fields listed should get displayed. ( for all the fields, instead maintaining each field, you can enter "ALL",
Eg: UserID -
Fields
CFO -
ALL ( report should display all the fields)
NONCFO-------Field1 | Field2 | Field3 | Field4 | Field5 ( only these fields should get displayed)
Note: In Customize table either you can maintain with User ID or Role. It will be more convinient in future as well.
Regards,
Reazuddin MD

Need help in formatting the report created using SSRS

I have created an image and used it as the body background. But I want that image to come at right
Set bodyRepeat as RepeatY.
Currently its showing as below I need this blue image at the right most side of the report as below
Also I need to display text on the image.
Need Help!!!
Abhinav

Hi AbhinavSultania,
According to your description, you created a report and added background image to it, you want to display the image at right side of the report and display text on the image.
According to my knowledge, we could not control position of background image, as a workaround, we can refer to the following steps:
Create an image with the blue line at right side of it using Paint.
Right-click body of the report to open Body Properties dialog box, then import the image as background image.
Drag text box from Toolbox to the blue line of the image. Right-click inside of the text box and click Expression, we can use expression to show dynamic contents at runtime.
The following screenshot is for your reference:
If you have any more questions, please feel free to ask.
Thanks,
Wendy Fu
Wendy Fu
TechNet Community Support

Technical Names appearing in the report output

Hi Experts,
I am in support and got a strange case. When one of the users runs the report in web, he sees technical names of the fields instead of their description. On the contrary, when I run the report, everything comes fine. I don't know where the problem could lie. If you can help me, that would be really great.

Hi Shobhit,
Please check that if the objects are Translated to the language User is using.
When you try to run the report, you might be using English as default language and everything is there in English only.And when user tries to run the report, most possibly use's login Language must be different.
You can crosscheck this by using the users language while logging in to Analyser,
If this is the case (Translation) even you will see the Technical names.
For Translation Help :
[https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/30a65c3a-2ad5-2910-a4be-88412392cfe5]
Hope this helps.
Best Regards,
Pratap Sone

I cannot type anything into the Google search field; each character typed brings up a list of suggestions below the search field, but nothing appears in the search field itself.

When in Mozilla and I bring up Google, the search field appears but the cursor does not blink as it ordinarily would do. When I try to type a search string it doesn't appear in the search field, instead a list of suggestions appear depending on the character(s)

Solved: This was caused by replacing the SegoeUI (Regular) true-type font. I have no idea what process or why that font was deleted, but finding the segoeui.ttf file on another Windows machine, emailing it to myself, saving it to disk, then right-clicking and choosing "Install" fixed this problem.

Fields are not appearing in the configuration

HI All,
I created new view in the BP_HEAD component and view type is table view. In that view i created model context node and it is referring to BuilHeader bol object. these context node fields are not showing in the configuration tab. if i expand my context node folder in the configuartion , it is shoiwng empty. I am facing this problem.I changed view type table to form also it is not working.Could you help me any one .
i

Hi venky
Check the generation of the context node class , check its super class it should be CL_BSP_WD_CONTEXT_NODE_TV, and your view code must support the configuration. check the below view code snippet for table
here replace the partner with your view variable which represents the controller class context node
<%@page language="abap" %>
<%@extension name="thtmlb" prefix="thtmlb" %>
<%@extension name="chtmlb" prefix="chtmlb" %>
<%@extension name="bsp" prefix="bsp" %>
<%
DATA: lv_xml               TYPE string,
lv_visible_row_count TYPE string.
lv_xml = controller->CONFIGURATION_DESCR->GET_CONFIG_DATA( ).
%>
<chtmlb:configTable xml                   = "<%= lv_xml %>"
                    id                    = "ResultTable"
                    navigationMode        = "BYPAGE"
                    onRowSelection        = "Select "
                    selectionMode         = "<%= PARTNER->selection_mode %>"
                    table                 = "//PARTNER/Table"
                    usage                 = "SEARCHRESULT"
                    visibleRowCount       = "10"
                    width                 = "100%"
                    actionsMaxInRow       = "6"
                    selectedRowIndex      = "<%= PARTNER->selected_index %>"
                    selectedRowIndexTable = "<%= PARTNER->selection_tab %>" />
The generated method GET_TABLE_LINE_SAMPLE must refer to BOL structure that you refered
say for example if you are creating table for BuilHeader the generated code should contain the structure CRMST_HEADER_OBJECT_BUIL. (sample code snippet is given below)
    TYPES: BEGIN OF line.
    include type CRMST_HEADER_OBJECT_BUIL.
    TYPES:
           END OF line.
    CREATE DATA rv_sample TYPE line.
Thanks & Regards
Raj

Need to list all the reports in enterprise XIR1

Hi,
My requirement is to list all the reports available within folders their sub-folders?
For ex: Folder A has sub folder B->Sub folder B has another sub Folder C->in which the reports are available some thing like a two-level hierarchy.
Is this possible?
Thanks!!!

some sample queries for Query Builder:
Get a list of all WebIntelligence reports:
Select SI_ID, SI_NAME From CI_INFOOBJECTS Where SI_PROGID='CrystalEnterprise.Webi' And SI_INSTANCE=0
Get a list of all Crystal Reports:
Select SI_ID, SI_NAME From CI_INFOOBJECTS Where SI_PROGID='CrystalEnterprise.Report' And SI_INSTANCE=0
Get a list of all universes:
Select SI_ID, SI_NAME, SI_KIND From CI_APPOBJECTS where SI_KIND ='Universe'
Get list of All Users by log on ID and Full Name:
SELECT SI_ID, SI_NAME, SI_USERFULLNAME FROM CI_SYSTEMOBJECTS WHERE SI_PROGID='CrystalEnterprise.USER'
Get list of all groups:
Select SI_ID, SI_NAME from CI_SYSTEMOBJECTS Where SI_KIND='UserGroup'
get list of all folders:
Select SI_ID, SI_NAME From CI_INFOOBJECTS Where SI_PROGID='CrystalEnterprise.Folder'
get list of all categories:
SI_ID, SI_NAME From CI_INFOOBJECTS Where SI_KIND='Category'
get list of all personal categories:
Select SI_ID, SI_NAME From CI_INFOOBJECTS Where SI_KIND='PersonalCategory'

SY-PAGNO does not appear when the report is run in background

Dear all,
I have one customised program that has page number included in each page. When I run it online, it will display the page number. But, when I run it in background, the page number disappear!!
The command of WRITE: 'PAGE NUMBER:', SY-PAGNO was done under TOP-OF-PAGE.
Am I doing it correctly? Please advice. Thank you.

Dear Seshu,
This is my complete coding under TOP-OF-PAGE.
      write: /130 'VA DYNAMICS SDN BHD',
             /122 'Stock Ageing Report as at ', s_budat.
      skip 1.
      write: /270 'Page: ', SY-PAGNO.
      skip 1.
      format intensified on color col_heading .
      write: /01(292) sy-uline.
      write: /01 sy-vline, 'Part No.                  ',
                  sy-vline, 'Mat.Grp. ',
                  sy-vline, 'Description                             ',
                  sy-vline, 'GT 2 Years           ',
                  sy-vline, '1 - 2 Years          ',
                  sy-vline, '6 - 12 Months        ',
                  sy-vline, '3 - 6 Months         ',
                  sy-vline, '3 Months             ',
                  sy-vline, '7 Days               ',
                  sy-vline, 'Quantity      ',
                  sy-vline, 'Value           ',
                  sy-vline, 'Avg.Price',
                  sy-vline, 'ValA',
                  sy-vline, 'Loc. ',
              292 sy-vline.
      write: /01(292) sy-uline.
Below is my report declaration:
REPORT ZTEST_STKAGE_VAD NO STANDARD PAGE HEADING LINE-SIZE 295 LINE-COUNT 65 .
All this while, I used the same way of displaying SY-PAGNO. No problem at all. Now it give me a problem.
Regards.

Need Help regarding Printing the report in Bi Publisher

Hi,
I have configured the printer successfully. But the problem is when i give the print in PDF format it coming in some symbols and for single page it is printing nearly 10 pages. When i gave print in HTML format then it is printing in Html tags.
Please help me how to achieve this problem...
Thanks& Regards,
satish.e

Usually the BEX is slower than the web applications.BEX needs a lot of resources on the client computer.
Are you using any macors / VB code to do some processing before display the query output in BEX ?
Ravi

0CO_ITEM_TX field needs to appear in the report

Similar Messages

Maybe you are looking for