0CO_OM_OPA_6: Custom fields added, Data - available in RSA3, but not in PSA

Hi Friends,
I have added some custom fields to the 0CO_OM_OPA_6 data source. Following are the details.
1) Custom fields: ZZEBELN (Purchasing Doc), ZZUSNAM (Username)
2) Code populated in SE19 (BADI for this Datasource)
3) RSA3: Test extraction pulls the records for both the custom fields correctly.
4) RSA5, and RSA6 - Fields are unchecked for hidden and field only. They are made available.
5) Extract Structure replicated into BW and its pulled over from extract structure into Transfer structure.
6) Mapped to corresponding fields in BW update rule and transfer rules. (No routines or formulas exist)/
7) When load extracted into BW, data is blank for both the fields in PSA itself.
Our BW is 7.3 but we still use this datasource as 3.x transfer rules and datasource. In BW, it is connected to the Cube 0OPA_C11 via update rules and 3.x transfer rules only.
Is there any reason for the data being populated into the RSA3, where as not into PSA. Please consider the above points, and let me know if I have done or missing anything here in my steps. I have gone thru several forums and havent got any specific replies for such issues. Have you come across such issues, please share your thoughts and views.
Any of your replies will definitely help. Really appreciate your inputs.
Thanks!!
Prasith

Hi Prasith ,
After reading all the answers , what i feel we are missing a major step ie Re-initialization of the cube .
As you changed the extract structure and added new fields and for this Data source i assume that deltas were running already , the BW system cannot pull these new fields directly from ECC unless you have not done a re-INit again .
The Re-init is pretty simple and not as complex as LO.
I would advise you to re-init for 01.2014 till 016.9999 , run full load and then delatas will flow in later on . Check during the full load if you are able to see these fields in BW in (PSA/ Cube) .
But be careful you need to do Re-init only on week ends when there are no transactions happening else you might end up in duplicate data .
Hope this helps !
Let me know how it goes .
Regards
Zeenath

Similar Messages

How to set a default date for a custom field of Date type in project server 2010.

hi,
can somebody help me.
How Can i set the default date for a custom field of date type in project server 2010 ?

Dear Rohan,
You can set default value to custom field thru Lookup table. Assign lookup table to custom field and set default value to some lookup value (Note: check the “Choose a value to use as a default when adding new item” checkbox).
Regards,
Avinash kumar | Blog:http://avigr8.wordpress.com | If you found this post helpful, please “Vote as Helpful”. If it answered your question, please “Mark as Answer”.

Defaulting a customer field (added through EEW) while bus. obj creation.

Hi All,
There a customer field added through EEW.
Now suppose when we are creating an object (BUS2000170, in my case) this customer filed value should be set the a default value. Under GENIL_MODEL_BROWSER i can see this filed in 'BTitemcustext'.
I am trying to do it through EVENTS (by calling a FM after AFTER_CREATE event) but i could not find 'BTitemcustext' in the table type CRMT_EXTENSION_COMT.
Now i dont know where to set this value.
Can anyobe please help on how we can set default value for fields developed through EEW.
Thanx,
Abhi.
Edited by: abhishek ranjan on Jan 7, 2011 10:11 AM

Hi Rajni,
This BADI will only be called when i will save the order.
I want to set the default value the moment the object is created. Thats why i wanted to do it through events(CRMV_EVENT).
The reason being suppose the order is not saved , till then this default value will not be visible in the UI side(Even after the object creation).
Also where i can set this default value??
I mean this field is available under the model 'BTITEMCUSTEXT'. Also the filed is not visible in the table type for extensions (CRMT_EXTENSION_COMT).
Please let me know i am wrong.

How to handle Custom field added in BP : Role Bill Account

Hi Friends,
I am working on an interface which creates Bill Account role for a BP but the problem is there are about 15 Custom fields added to standard BP transaction in BA role.
As I am using BAPI_BUPA_FS_CREATE_FROM_DATA2 for creating the BP and
BAPI_BUPA_CENTRAL_CHANGE for changing the BP role Bill Account?
Can anyone tell me how to handle those custom fields in the existing BAPIs or there is some other way of doing it?
Thanks in advance,
Pradeep
Note : Helpful answers will be rewarded.

Hi,
I have seen these BAPIs but are they used with normal BAPIs for BP creation and change.
For example : I create the BP using BAPI_BUPA_FS_CREATE_FROM_DATA2 and for the Custom fields I should use these BAPIs as suggested by you alongwith the create BAPI.
And will it work for Changing the BP also.
Kindly clarify.
Regards,
Pradeep

I added a custom field into my form in BC but it wont render.

I added a custom field into my form on BC but I cannot get it to show up whhen I preview it. Does anyone know why this is happening?

Check out this http://ellenmemorialhcc.businesscatalyst.com/contact-us.html In this site I am just trying to add a 4 checkboxes. I have tried previewing it and everything and it will not make the changes. How do i get these checkboxes to show up on my site. I found where in business catalyst to access them and I enabled those features in BC but i cannot figure out how to get this to show up live on my business catalyst site.

Adding an image when signing, but not in the signature field, in Reader

Hi,
I would like to know if it is possible to add an image to a pdf document when I sign the document in Reader.
I do not want to add the image in the signature field as a signature, but rather below the signature field. The image is 'n barcode providing me with more information on the signature.
I have looked at the Stamper example, but this functionality is not avialable in Reader.
Thank you,
Magda

If you insert after signing you will break the signature!! You need to do any such stamping BEFORE signing.
From: Adobe Forums <[email protected]<mailto:[email protected]>>
Reply-To: "[email protected]<mailto:[email protected]>" <[email protected]<mailto:[email protected]>>
Date: Wed, 26 Oct 2011 23:54:15 -0700
To: Leonard Rosenthol <[email protected]<mailto:[email protected]>>
Subject: Adding an image when signing, but not in the signature field, in Reader
Re: Adding an image when signing, but not in the signature field, in Reader
created by magdakuit<http://forums.adobe.com/people/magdakuit> in Acrobat SDK - View the full discussion<http://forums.adobe.com/message/3992619#3992619

0fi_ar_4 netduedate(netdt) value coming in RSA3 but not coming in BI PSA

Hi all,
i am using 0fi_ar_4,
netduedate(netdt) value coming in RSA3 but not coming in BI PSA, in BI PSA there is 10-12 do cument there where netduedate is null while for same document we are getting the netduedate running from transaction RSA3, how?
Thanks.

Hi,
I found the problem, i have write a user exit in data sourc e in ecc, i am getting value in rsa3 but not getting in BI PSA becaue ise there is 20000 KB limits for per info package load request i.e. idoc size, as its fixed, i did change little in my user exit at ECC.
thaks

How can I buy an IOS app available in UK but not in Australia

How can I buy an IOS app available in UK but not in Australia.
The App is " Weber'c on the Grill"

That will not work.
Please test your advice before posting it.

Took backup of data files and controlfile but not archive file db is 11g xe

took backup of data files and controlfile but not redo file db is 11g xe r2..was trying complete shut backup,..missed redo..
anyway to restore the db back..
I had failed to backup redo log file..
db was shut...properly
any info highly appreciated.
cheers
Edited by: zycoz100 on Feb 27, 2013 4:42 AM

A controlfile create is a fairly trivial task, for either a cold backup or hot backup scenario. Well, its an easy task after you've done the process a few times.
If you have a healthy oracle instance running any place else, preferably at 11gR2, or even a 10g instance can work as an example, get a system connection and do an `alter database backup controlfile to trace;` and the instance will create a new trace file with all SQL commands needed to rebuild the controlfile in the instance trace directory.
Have a look at the trace file, a `show parameter diag` reveals the diagnostic_dest parameter, look for the "trace" directory under that folder, for the latest *trc file. In 10g its `show parameter dump` and the trace file goes straight to the user_dump_dest directory, no digging required.

I have a MacBook Air with OS X Yosemite 10.10.2. The "cut" function is available in "Edit" but not active upon any file selection. What to do to have it active?

I have a MacBook Air with OS X Yosemite 10.10.2. The "cut" function is available in "Edit" but not active upon any file selection. What to do to have it active?

You cannot; it's intentionally disabled to guard against accidental file loss. If you press Option when pasting the files, they'll be moved instead of copied.
(123543)

How to control the name of custom field in data base table, added by AET

Hi,
I have added the one custom field by Application Enhancement Tool (AET).
The name of custom field has been added in the data base table as ZZFLD000004 by AET.
I need to add the some meaningful name like that ZMYPROB.
How can I control the name of custom field in the database field through AET?
Thanks,
Amit

Got the answer.
Need to click on the Enable Expert mode, then custom field name will be editable.

Sample code for a custom field added to LIS Communication structure for Del

We appended a new custome field into extraction structure of the LO Cookpit datasource 2LIS_02_ITM through RSA6. And then run CMOD to write the exit code to populate the value and it works fine. But after we read Roberto's Weblog:
/people/sap.user72/blog/2005/02/14/logistic-cockpit--when-you-need-more--first-option-enhance-it
Find the enhancement we did can't make the Delta mechanism works if only this new field gets changed in a record, and the change cannot be reflected on BW. I know we can run SMOD on the enhancement LEINS001 to write the code for LIS Communication structure customer exit. But we have never writen such a code for LIS Communication Structure enhancement and also don't know on how to make the Delta mechanism works in the code. We would be very appreciated if some expert here can provide the sample code!
Thanks

hi AHP,
Have you tried Sanyam's code listed in this article you recommended?
Now our R3 team has added a custom field called ZZZ to EKKO table and I modify the code to suit our need and the code would be as following:
*& Include ZXM06U16 *
DATA: i_t_ekko LIKE ekko OCCURS 1 WITH HEADER LINE.
DATA: ebeln LIKE ekpo-ebeln,
it_ekko TYPE TABLE OF ekko WITH HEADER LINE,
old_val(50) TYPE c. "For storing the value from the Field Symbol
FIELD-SYMBOLS <fs> TYPE ANY TABLE.
CASE zeitp.
WHEN 'MA'. "When creating a purchase order
MOVE '(SAPLEINS)T_EKKO[]' TO old_val.
ASSIGN (old_val) TO <fs>.
i_t_ekko[] = <fs>.
LOOP AT xmcekko.
ebeln = xmcekko-ebeln.
IF xmcekko-supkz = '1'. "Old Value ?
SELECT SINGLE * FROM ekko INTO it_ekko WHERE ebeln = ebeln.
xmcekko-ZZZ = it_ekko-ZZZ.
ELSE. "New Value ?
READ TABLE i_t_ekko WITH KEY ebeln = ebeln.
xmcekko-ZZZ = i_t_ekko-ZZZ.
ENDIF.
MODIFY xmcekko.
ENDLOOP.
EndCase.
The compile of the above code works fine and we activated everywhere including project level. Then we set debug points in this code, and run RSA3 on 2LIS_02_ITM, but find the extraction program never reaches this code or call this user exit function EXIT_SAPLEINS_001 of this enhancement LEINS001. Any reason?
Thanks
Kevin
Message was edited by: Kevin Smith

SRM 7.0 New custom fields added to view do not appear in the component conf

Hi
I added two custom fields to the view V_QTE_DOFC_I_DESC of the WD componenet /SAPSRM/WDC_DODC_QTE_I_DS. This view gets called when bidder is trying to create a bid and clicks on add Substitute Item in the Item tab. This view is simply a popup window where we can enter ther substitute item.
I added two custom fields to the context of the above view and placed on the layout of the view as input fields. Then I tried to modify the component configuration /SAPSRM/WDCC_DODC_QTE_I_DS_SUB. When I look in t he web dynrpo built-in for the view V_QTE_DOFC_I_DESC, I don't see the custom fields that I just added. As a result, these custom fields are not displayed when I try to substitute an item. Could anyone tell me how to brining in these two custom fields into the component configuration.
Any help is greatly appreciated.

Hi Prasuna,
Sorry ..You are right..I was looking at some other WDC related to contract data..It you map the CUFs to /SAPSRM/S_CLL_CTR_ITEM which has the include structure INCL_EEW_PD_ITEM_CSF_CTR then it should work fine.
If you do this, are you able to view the new fields on the screen?
you mentioned that you are not able to save the data to the table.
Include your fields in INCL_EEW_PD_ITEM_CSF as well because if you add CUF to any of those doc types, you also have to add those CUF to the global structure for CUF documents.
Also Check if you fields are there in structures BBPS_CTR_CUF_ITEM,BBPS_CTR_UI_ITEM and BBPS_CTR_ITEM.
Check whether you have implemented the BADI's like BBP_DOC_CHECK_BADI ,BBP_DOC_CHANGE_BADI and BBP_DOC_SAVE_BADI . check out the structures (whether they having the CUFS) used in those if you have implemented any of them .
Regards
Lavanya
Edited by: LAVANYA CHAVA on Aug 25, 2010 10:10 AM

Search help for custom fields added through BADI_FDCB_SUBBAS04

Hi guys
I have two cutom fields on basic data screen that i have added using an implementation of the BADI
BADI_FDCB_SUBBAS04
I want to use the value entered in one of the fields as a import parameter in another fiields search help. On value request the structure INVFO contains the other data entered on screen in the basic data screen however my custom fields appear empty.
However if i press enter and request values again the search help will pop up correctly. Is there a way i can avoid having to press enter before i can get my values??
regards
Isaac Prince

Hi guys
I have not found any notes/texts regarding my issue however i think with some user training/re-orientation the small issue will go away.
regards
Isaac Prince

Problem in delta management for custom fields added in standard Table

Hi developers,
we have a problem, when a sales order is modified in a field custom, added in tables (VBAP-VBAK), the delta BW doesn't recognize the modifications. The data type of these fields haven't the flag (Change document) setted in
view Definition.
If this flag is setted, Can the delta BW recognize the modifications of the custom fields?
Best regards
Domenico

You cannot get delta by just appending fields to extract structure & writing the user exit coding as this user exit code is run by the extractor after the X- and Y- tables are compared to create the before & after images.
You have to do this procedure by enhancing LIS comm structures like MCVBAP (for example).
Please refer to OSS note 576886 for complete details.
Kumar Gudiseva.

0CO_OM_OPA_6: Custom fields added, Data - available in RSA3, but not in PSA

Similar Messages

Maybe you are looking for