0COMPANY mapping issue - Eugene pls advice

Hi,
We are doing a consolidation project. Now during the mapping, we are mapping 0COMPANY to 0COMP_CODE on BCS side, the system gives a error saying that the object lengths dont match. Where company is 6 and comp_code is 4. Now we want to truncate company to 4 from 6 (atleast thats what i was asked to do)due to the dependencies of the object the system wont allow me to change it, which is very normal. 
I believe this is a very common issue faced by everyone, how do u guys overcome this hurdle? Is it a common practice that you change the length of standard object (0COMPANY) to achieve the mapping. I'm confused as i have literally no knowledge how the mapping works on BCS side.
Any help will be appreciated. <b>Eugene please comment.
</b>
Thanks,
Sri

Hi Sri,
When I tried to create a basis with my custom Company infoobject amd mapped it to 0COMPANY in BCS, I got a lot of errors. They were something like uncompatible infoobjects.
First of all, I recreated my custom company infoobject as of the same type and length as 0COMPANY in BCS. Anyway, I got the same errors.
Now I think that the type and the length of the infooobject was not the main issue.
The prerequisite of the succesful mapping the custom company infoobject to 0COMPANY in BCS is:
beside the company, you have in your basis: the trading partner company, the recalculation (reallocation? -the English term may differ) company, the investee company -- I cannot check it right now, I'm writing from my home -- if you need the complete list, I can check it tomorrow in the system.
The main lesson learned -- all these companies MUST BE CREATED AS REFERENCE infoobjects to your custom BW company infoobject.
Map them to the appropriate roles in BCS. The error should vanish.
It's interesting to me if it'll work. So, please come back with your feedback. I think that the different lengths of the IO in BW and BCS shouldn't matter.
Just create the reference company infoobjects in BW and map them correctly to BCS roles.
Hope it helps.
Best regards,
Eugene

Similar Messages

  • RFC Receiver adapter issue. Pls advice

    Hi All,
    When XI is sending data back to R/3 system though RFC Receiver Adapter  I am getting the below error. Any suggestions
    Error Category   XI_J2EE_ADAPTER_RFC
    Error Code  RECEIVER_GENERAL_ERROR
    Pls advice.

    Rick, your question is very unspecific, so anyone trying to help can only guess very roughly.
    So I only have a very rough hint for you, which is the FAQ for RFC adapter.
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes/sdn_oss_bc_xi/~form/handler%7b5f4150503d3030323030363832353030303030303031393732265f4556454e543d444953504c4159265f4e4e554d3d373330383730%7d

  • UDF in message mapping instead of Java Mapping. Pls advice urgent

    Hi All,
    My scenario
    CRM --- XI -- CRM
    In XI I have to open socket connection.
    Pls refer link:
    /people/saravanakumar.kuppusamy2/blog/2005/12/15/socket-integration-with-xi
    Can Java Mapping code given in above link for socket connection can be used in Message Mapping (CRM -- CRM)UDF?
    Pls advice urgent
    Regards

    Hi Henry,
    I understood your requirement.
    But as per the architecture of XI/PI some message has to trigger your scenario.
    In this case there is no adapter where you can directly communicate with CRM system.
    Do one thing configure a dummy scenario on the sender side.
    Use File adapter for simplicity. once it pools the file with some dummy data in the file it comes to Interface mapping(message mapping) of the PIPELINE steps. Now use the code as you mentioned above(within UDF) for opening socket to CRM system and implement you business logic within that program and write the response to target interface which will infact talk with CRM system.
    Dont forget to do the coding in an infinite loop with some delay (if required). Other wise every time you have to put a message for File Adapter for triggering purposes.
    You can also acheive the same if you use Java Mapping instead of Graphical mapping with UDF(code for Opening socket and business logic). I suggest you to use Java Mapping.
    I dont know how you will comunicate with CRM system on receiver side.?
    Thanks,
    Gujjeti

  • XI to WebService . Pls advice urgent

    Hi All,
    Scenario:
    There is some response from System A back into XI.
    I need to send response from XI to System B and get response back to XI.
    System B has Synchronous Web Service and has provided its WSDL to XI.
    Question:
    1. Do I need to Import Webservice WSDL as External Defination in XI.?
    2.Do I need to use only Soap Receiver Adapter in XI as it is Synchronous Web Service and XI can get response back from that System or also I need Soap Sender Adapter ?
    Regards

    Hi Sudeep,
    I am sending this xml from runtime workbench:
    <?xml version="1.0" encoding="UTF-8"?>
    <ns0:MT_REQ_TEST xmlns:ns0="http://CRM">
       <MobileNo>1</MobileNo>
       <Message>2</Message>
       <ActivationCode>3</ActivationCode>
       <StrService>4</StrService>
       <StrFrom>5</StrFrom>
       <StrOptions>6</StrOptions>
    </ns0:MT_REQ_TEST>
    The below XML forms after mapping
    <?xml version="1.0" encoding="UTF-8" ?>
    - <ns1:SendMessageSoapIn xmlns:ns1="urn:MMWebSrvService">
      <strFrom>XI</strFrom>
      <strTo>1</strTo>
      <strMessage>2</strMessage>
      <strSubject>3</strSubject>
      <strService>abc</strService>
      <nOptions>0</nOptions>
      </ns1:SendMessageSoapIn>
    In Soap Receiver Adapter
    URL -- http://172.20.80.11/MMWebService/MMWebSrv.asmx
    Soap action -- #SendMessage
    The error I am getting now:
    <SAP:AdditionalText>soap fault: Server was unable to read request. ---> There is an error in XML document (1, 97). ---> <SendMessageSoapIn xmlns='urn:MMWebSrvService'> was not expected.</SAP:AdditionalText>
    Pls advice
    Regards

  • Webservice sender and Receiver. Pls advice urgent

    Hi All,
    My Scenario
    System A (WebService) -- XI -- System B (WebService)
    Pls let me know
    1. What does it mean by WebService needs WebServer?
    2. For System A (WebService) -- XI
        Do I require WebServer to be installed at System A or XI?
    3. For XI -- System B (WebService)
    Do I require WebServer to be installed at System B or XI?
    Pls advice urgent.
    Regards

    Hi Piyush,
    Hi Piyush,
    System A (WebService) -- XI --- System B (WebService)
    I know the flow -- like both webservices will be impoted as External Definations and will me mapped.
    I was asking about Webserver.
    a. XI --- System B (WebService)
    System B is providing wsdl.
    WebServer is required at System B -- fine.
    b. System A (WebService) -- XI
    System A is providing WebService(wsdl) to XI
    XI is NOT providing WebService to System A.
    So It is a webservice(wsdl) of System A. It will be given to XI and XI will import it as wsdl.
    So do we or not require require Webserver in
    System A or XI?
    Pls tell System A (WebService) -- XI
    Webserver part.
    Regards

  • Alert Problem. Pls advice

    Hi Aall,
    I have made one alert Category.
    Initially Wwhen I do not check -- Suppress Multiple Alerts of This Rule  every time I was getting alert.
    But as I want one alert I check that box I am not getting any alert.
    Pls advice urgent
    Regards

    hi
    here give you some blogs and Docs about alerts
    apply the better for you
    XI: Alerts - Step by step
    /people/michal.krawczyk2/blog/2005/09/09/xi-alerts--step-by-step
    http://help.sap.com/saphelp_nw04s/helpdata/en/d0/d4b54020c6792ae10000000a155106/frameset.htm
    Triggering by Calling a Function Module Directly.
    /people/bhavesh.kantilal/blog/2006/07/25/triggering-xi-alerts-from-a-user-defined-function
    Alerts with variables from the messages payload (XI) – UPDATED
    /people/michal.krawczyk2/blog/2005/03/13/alerts-with-variables-from-the-messages-payload-xi--updated
    Simple Steps to Get Descriptive Alerts from BPM in XI
    /people/community.user/blog/2006/10/16/simple-steps-to-get-descriptive-alerts-from-bpm-in-xi
    Triggering XI Alerts from a User Defined Function
    /people/bhavesh.kantilal/blog/2006/07/25/triggering-xi-alerts-from-a-user-defined-function
    Throwing Smart Exceptions in XI Graphical Mapping
    /people/alessandro.guarneri/blog/2006/01/26/throwing-smart-exceptions-in-xi-graphical-mapping
    /people/sukumar.natarajan/blog/2007/01/07/how-to-raise-alerts-from-abap-proxy
    /people/michal.krawczyk2/blog/2005/09/09/xi-alerts--troubleshooting-guide
    /people/sravya.talanki2/blog/2006/11/22/error-handling-framework-xiout-of-the-box-episode-1
    /people/ginger.gatling/blog/2005/06/16/integrating-alerts-into-uwl--its-no-problem
    /people/aravindh.prasanna/blog/2006/02/20/configuring-scenario-specific-e-mail-alerts-in-xi-ccms-part-3
    /people/aravindh.prasanna/blog/2005/12/24/configuring-scenario-specific-e-mail-alerts-in-xi-ccms-part-2
    /people/aravindh.prasanna/blog/2005/12/23/configuring-scenario-specific-e-mail-alerts-in-xi-ccms-part--1
    http://help.sap.com/saphelp_nw2004s/helpdata/en/56/d5b54020c6792ae10000000a155106/content.ht
    http://help.sap.com/saphelp_nw04/helpdata/en/2c/abb2e7ff6311d194c000a0c93033f7/frameset.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/80/942f3ffed33d67e10000000a114084/frameset.htm
    /people/michal.krawczyk2/blog/2005/09/09/xi-alerts--step-by-step
    check this links.
    https://www.sdn.sap.com/irj/sdn/forums
    Trouble shooting Alert configuration:
    /people/michal.krawczyk2/blog/2005/09/09/xi-alerts--troubleshooting-guide
    /people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions
    Alert Inbox
    http://help.sap.com/saphelp_nw04/helpdata/en/80/942f3ffed33d67e10000000a114084/frameset.htm
    Alert Notification Step-by-Step
    http://help.sap.com/saphelp_nw04/helpdata/en/49/cbfb40f17af66fe10000000a1550b0/frameset.htm
    Defining Alert Classifications
    http://help.sap.com/saphelp_nw04/helpdata/en/49/cbfb40f17af66fe10000000a1550b0/frameset.htm
    Triggering Alerts
    http://help.sap.com/saphelp_nw04/helpdata/en/49/cbfb40f17af66fe10000000a1550b0/frameset.htm
    Setting up alerts
    Setting up alerts in RZ20
    Alert Management
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e04141e8-0f11-2a10-adaa-9d97b062c2df
    Alert Notification
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/90f449a8-a6db-2910-a386-d2b5999f5751
    Thanks
    Rodrigo

  • Http Scenario. Pls advice very urgent

    Hi All,
    My Scenario is
    a. HTTP sends data to XI Synchronously.
    b. XI opens Socket Connection in User Defined Function (UDF)
        of Message Mapping and gets response back from Socket
        in UDF. For Socket Connection request and response I will
        write java code in UDF
    c. XI needs to send back Socket response to HTTP as XI has
        received data from HTTP Synchronously.
    d. XI also needs to send back Socket response to File.
    How to make this approach in XI using BPM.
    Pls expain urgent
    Regards

    Hi Praveen,
    Steps in BPM I have done :
    1. One Rec step with Open S/A mode.
        Abstract Sync Message Interface for HTTP Request and
        HTTP Response.
    2. Transformation Step (Mapping in BPM)
        HTTP Request and Socket Response
    3. Fork Step -- Necessary Branch 2
    4. Branch 1st --
      a. Transformation Step(Mapping in BPM)
        Socket Response and HTTP Response
       b.One Send Step with Close S/A mode for HTTPResponse
          back
    5. Branch 2nd --
    a. Transformation Step (Mapping in BPM)
        Socket Response and File Response
    b. One Send Step for File Response back.
    Pls advice is it ok ?
    Regards

  • HTTP Synchronous Scenario. Pls advice urgent

    Hi All,
    My scenario
    System A -- XI --- System B
    This is Synchronous HTTP scenario.
    I tested in XI RWB.
    a. I took Message Mapping Source xml structure and sent from RWB it worked fine.
    b. I took xsd of Request Data Type and sent from RWB it shows error
    "MAPPING">EXCEPTION_DURING_EXECUTE"
    Now In real scenario System A will send data to XI.
    So does it mean that I need to send Message Mapping Source xml structure to System A and not xsd of Request Data Type
    Pls advice
    Regards

    Hi,
    Check the message status in SXMB_MONI and let me know the trace and error message.
    the below message shows that there is some problem in mapping, u have not done the correct mapping between source and target.
    EXCEPTION_DURING_EXECUTE"
    test the message in message mapping using test tab and let me know the result.
    chirag

  • MapViewer blank map issue

    This is for MapViewer Java API, using tile cache - and it's a hard to reproduce problem
    In our application sometimes the map will return blank with no layers. In the logs I'll see that the layers got queried and styles got applied and no apparent errors, but the returned image is blank with only the background color applied.
    When this happens just panning around /refreshing will cause the map to be rendered correctly, with minimal wait, as if the cached image was already there created from the previous map request.
    Has anyone seen this before ?
    Is there something I should be looking for in the logs that could shed some light on the cause of the problem ?
    Thanks.

    Hi User635830,
    firstly I like you "to out yourself" by going to "Your Control Panel" (upper right) --> Your Settings [edit] and edit your "user635830" and insert your name ! Thanks !
    Secondly for ur blank map issue I recommend to check the "Java Heap Size" settings, i.e. how much memory is assigned to your Mapviewer Java Application.
    Pls see [an explanation how |http://oracle-maps.blogspot.com/2008/05/more-memory.html] in my BLOG.
    Hope that solved the problem.
    Bernhard

  • Safari private browsing is not private-pls advice

    A good and bad thing about MBP is its transparency in documenting things done (things done today, past week etc). Everything is documented and available. It is disturbing of course if one is equipped with secrecy-genes.
    In Safari private browsing is not quite private. As Christian Buerli wrote in MacFormat, uk on page 77 in summer 2008 "even with private browsing on, the domain names of visited, Flash enabled sites will be recorded to /Library/Prefs/Macromedia/FlashPlayer/#SharedObjects/.
    My question is if I can dump all these shared objects (must be many hundreds of them) with no harm done to anything else.
    pls advice,
    pyry

    Safari can keep your browsing history private. When you turn on private browsing, Safari doesn’t remember the pages you visit, your search history, or your AutoFill information, so your partner cannot see where you have been, but you must also remember to also turn off acceptance of cookies.
    In all other respects Private Browsing is not as private as you might think:
    http://www.switchingtomac.com/tutorials/how-to-make-safaris-private-browsing-fea ture-actually-private/
    http://www.insanely-great.com/news.php?id=9054
    and then Apple's own advice from here: http://www.apple.com/pro/tips/privacy_safari.html
    "Note that the Private Browsing option does not prevent Safari from collecting cookies (the preference files automatically generated by many websites). The Reset Safari option clears all cookies. If you want to delete only certain ones, choose Preferences from the Safari menu, click the Security tab, and then click Show Cookies. You can select and delete individual cookies from the list that appears. Careful, though — if you’re a frequent web user, this list can be very, very long."
    which is itself incomplete, the relevant part being 'If you want to delete only certain ones.
    To that end it is useful to have Safari Cookies installed, which is the only cookie manager available for Safari:
    http://sweetpproductions.com/safaricookies/
    which automatically deletes all cookies not marked as 'favourites' when closing Safari. It does the same for Flash Cookies, but they are subject for themselves:
    From this website: 

http://machacks.tv/2009/01/27/flushapp-flash-cookie-removal-tool-for-os-x/

 For those who do not know about Flash cookies, more properly referred to as Local Shared Objects (LSO), they operate in a similar way to regular browser cookies but are stored outside the purview of your browser, meaning you cannot delete them from within your browser, whether Safari, Firefox, Opera or any other. Typically they are issued from sites or 3rd party sites that contain Adobe Flash content. Since virtually all internet advertising is  delivered in Flash, Google/Doudleclick and all other internet advertising companies are sure to be tracking your browsing behavior with Flash cookies. These companies can see you traverse the Internet as you come upon the plethora of sites that contain their embedded advertising. Check out the Wikipedia entry here.

In Mac OS X they are stored in the following location:

    /User’s Home Folder/Library/Preferences/Macromedia/Flash Player/#SharedObjects
    

The settings for the Flash cookies are stored in:
/User’s Home Folder/Library/Preferences/Macromedia/Flash Player/macromedia.com/support/flashplayer/sys

 In OS X Local Shared Objects, or Flash Cookies, are appended with a .sol suffix. Flush deletes all the Flash cookies (.sol) and their settings.

Flush can be downloaded from that page.

If you want to retain certain Flash cookies but not others, the excellent add-on for Safari called SafariCookies now includes a setting for automatically deleting flash cookies you don't want to retain, when Safari is shut down, in the same as it deals with ordinary cookies:


    http://www.sweetpproductions.com/safaricookies/index.htm

 which not only does that but much more equally useful stuff! 

This article covers the issue in more depth:


    http://www.wired.com/epicenter/2009/08/you-deleted-your-cookies-think-again/

 Flash cookies are also known as 'Zombie Cookies' and are used by a number of firms, including Hulu, MTV, and Myspace. Graham Cluley, senior technology consultant at the internet security firm Sophos, told BBC News that the source of the trouble was Adobe Flash itself, which he called "one of the weirdest programs on the planet".

"I think it's highly unlikely that these large companies have abused Flash cookies - which are different from browser cookies - with malicious intent," he said.

"I think it's much more likely that the vast majority of users are simply oblivious to the bizarre way in which Adobe allows them to configure the software." 

http://www.bbc.co.uk/news/technology-10787882 

And a more recent article: 

http://www.nytimes.com/2010/09/21/technology/21cookie.html?_r=3&scp=1&sq=flash&s t=cse

  • XSLT mapping issue in parent child relation

    Hi Guys,
    i have one XSLT mapping issue. Mapping scenario is from IDoc to file.
    IDoc structure is as below
    <ZLOIPRO1>
      <E1AFKOL>
         <A></A>
         <B></B>
         <E1RESBL>
             <MATNR>1</MATNR>
             <CHARG>1</CHARG>
             <ZSBL>
                 <MTART>ABC</MTART>
             </ZSB>
         </E1RESBL>
         <E1RESBL>
             <MATNR>2</MATNR>
             <CHARG>2</CHARG>
             <ZSBL>
                 <MTART>ZHA1</MTART>
             </ZSB>
         </E1RESBL>
         <E1RESBL>
             <MATNR>3</MATNR>
             <CHARG>3</CHARG>
             <ZSBL>
                 <MTART>ZHA1</MTART>
             </ZSB>
         </E1RESBL>
      </E1AFKOL>
    </ZLOIPRO1>
    As you can see 'E1RESBL' is repeatative. Now my issue is i need to select 'MATNR' and 'CHARG' from 'E1RESBL' segment when first occurance of 'ZSBL/MTART' with value 'ZHA1' appears. i.e. my output would be MATNR = 2 and CHARG = 2.
    I hope i am clear. Please let me know if any solution for this.

    Hi,
    Try this
    <xsl:if test="./ZSBL/MTART == 'ZHA1'">
    <xsl:for-each select="./E1RESBL">
      <MATNR>
       <xsl:value-of select="./MATNR"/>
      </MATNR>
      <BATCH>
       <xsl:value-of select="./CHARG"/>
      </BATCH>
    </xsl:for-each>
    </xsl:if>
    You might need to do some changes in the above.
    Thanks,
    Prakash

  • EA4500 – Smart Wi-Fi interface and Windows Network Map issues

    I purchased this Router about 2 weeks ago as a phased upgrade of our Home Network, primarily to enhance media streaming. It has the latest firmware preinstalled from the factory. Prior to the purchase and installation of the EA4500 Router I replaced my old Motorola SurfBoard SB6120 DOCSIS 3.0 Cable Modem with a Motorola SurfBoard SB6141 DOCSIS 3.0 Cable Modem. My old Linksys E2000 Router worked perfectly with the SB6141, with the exception that the E2000 wasn’t IPv6 enabled, but does have 10/100/1000Base-T Ethernet (RJ-45) and Internet ports.
    The EA4500 has been installed for about 10 days and seems to have improved local network speeds and I don’t seem to be having any Internet connectivity issues. However, there are some disturbing issues with the EA4500 and the AE3000 I purchased. There are 11 devices connected through the Router; a Dell Desktop (wireless with the AE3000), a Dell Desktop (Ethernet), a Dell Laptop (wireless), 2 Canon Printers (1 Ethernet and 1 Wireless), 2 Western Digital 1TB MyBookLive Network Drives (both Ethernet), a WD TV Live Streaming Media Player (wireless), an Apple TV media player (wireless), an iPad (wireless), and an Android Smartphone (wireless).
    Issue 1 – The Linksys Smart Wi-Fi interface appears to be unreliable at times!!! I’ve read about this problem here on the Community involving the EA6500, so I don’t know if this is a Linksys Server issue, as suggested in a few responses, or a bug in the Router firmware, or defective hardware. However, when the interface locks up, it can’t be accessed from a wireless or wired connection. Usually, powering down the Router and then powering it back up and restart will allow it to function again. However, at times before the interface completely locks up it shows either just a white screen or the security screen will show no firewall features enabled. This is a little scary, so I’ll do a complete reset and setup; this is becoming a pain in the rear!!!!! Is there any hope for this being fixed, in this Router, not the next generation??????????
    Issue 2 - All of my network devices show up in the Router’s Device List. Except for the Apple devices they also show up, when they are online, in Windows 7 Explorer under Network and when you click on Network they are correctly displayed as Computers, Media Devices, Network Infrastructure, or Storage. However, when you click on “Open Network and Sharing Center” and then click on “See Full Map”; it fails with the response “Windows cannot create the network map. Responses from other devices on the network are delayed or there is an incompatible router on the network”; no device map is shown. When I follow the link for more information, the only thing that stands out is “A device on the network, such as a hub or switch, is not working properly or is not compatible with the Link Layer Topology Discovery (LLTD) protocol, which Windows uses to create the map. To fix this problem, disable the device, turn it off, or remove it from your network”. All of my network devices showed up on the Network Map with the old E2000. This issue is the same on all of my computers, either wired or wireless. Any known solutions for this, or is it as Windows suggests; an incompatible Router????
    Thanks in advance for any insight or solutions. With the issues I’m having with the EA4500 and the AE3000; they are both probably going back to Amazon.

    thebluemamba_24; Thank you for your suggestion; I finally found time yesterday to perform an extensive evaluation before I return the Router. However, rather than trying to add devices manually, my rationale was if the EA4500 can’t process them correctly, automatically, it needs to be returned anyway, so I added devices normally letting the device an Router handle the process.
    In thinking through this issue, all devices on our network are detected and identified by Windows Explorer on Windows 7 computers; except of course the Apple and Android devices (Apple TV, iPad, and Smartphone). So, I wondered if one of those three devices being added to the Router’s device list was somehow causing issues or interfering with Windows 7’s ability to generate a Network Map. Therefore, my approach was to turn off or disable all devices on our network, reset the Router to factory defaults, reestablish the Router to my custom Home Network configuration using a Windows 7 PC that has LAN and Wireless access to the Router, then add one device at a time and check with each addition to see if Windows 7 could still generate a Network Map.
    With the Router reset and reestablishment complete; I began the process of adding one device at a time and checking to see if a Network Map was being generated. What I discovered was when a recent addition to the network, a Western Digital WD TV Live Streaming Media Player, was connected (wirelessly), Windows 7 could no longer generate the Network Map and the failure was consistent. The only way to get the Network Map to work again was to remove power from the WD TV Live, although it remained in the EA4500’s Device List; simply turning it off didn’t help. Since I’d originally witnessed the Windows 7 Network Map working with the Linksys E2000 Router that the EA4500 replaced, I decided to test the WD TV Live with that Router. It worked initially, but it failed consistently after the first success. Interestingly, the failure indication was a little different, but nevertheless generation of the Network Map failed.
    I’ve tried changing a few settings on the EA4500 as well as the WD TV Live, but nothing helped. There was a recent firmware update to the WD TV Live, so I might try rolling back the firmware to see if it makes a difference.
    The Network Map issue might very well be an issue with the WD TV Live, not the Router, but after reading many threads on this Community I have reservations that the problems I’m experiencing with the Smart interface lockup will be fixed. I suspect new emerging replacement products will be the focus and these older products will be abandoned and no more firmware fixes will be forthcoming and I don’t want to spend more money for a new product just to fix old problems and get something that works properly. The Network Map issue is troublesome, but the lockup of the Router’s “Linksys Smart Wi-Fi” interface is a serious matter to me. It appears that once it locks up, the only way to correct it is a power off restart; not practical if you’re traveling and trying to access settings remotely; the selling point for this feature.
    Given the problems I’m experiencing with the EA4500 and AE3000, I guess I’ll return them. Too bad, because otherwise the EA4500 seems like it’s a good Router. I’ve been brand loyal since the Linksys WRT54G came out, but after reading this Community and with my personal experience with the EA4500 and AE3000, now I’ll probably give the NETGEAR N900 equivalents a try.

  • Credit memo and MAP issue

    Hello Guru's
    I have 2 issues, and i am unable to understand the system logic for the same
    Issue 1:-
    We have an Intercomapny scenario
    sequence of transaction is as follows
    1. Create Return purchase order (document type NB) - Intercompany purchase
    2. Post return goods receipts - movement type 161
    3. Post credit memo with respect to return purchase order
    4. Cancel the movement type 161 - using 161 movement type
    System allows me to cancel the document created using 161 movement type
    Step 4 should not be allowed but system is allowing me to do so, please advise how to stop this
    Issue 2:-
    I have a strange MAP issues which is flactuating very drastically
    the scenario is as follows
    Store stock is 10 ea, stock value is 1000, MAP is 100
    DC map is 25
    When we make return STO from store to DC, ths stocks are issued at DC MAP (condition type P101)
    Assume we issue 9 quantity from Store then
    Store stock is 9 ea, stock value is (1000-(25*9)) =  775, MAP is 775/1 = 775
    This transaction is causing major flactuation in store MAP (100 changed to 775)
    Please advise if there is any way we can control this behaviour
    I understand that there is a setting which will in case of major MAP changes will put the amount into PRD account.
    Appreciate if you can guide me to help
    Regards
    Amit

    Hi,
    For your first scenario,
    for a retun po of IC NB type, after creating the PO you  need to deliver the same at VL10G. For the delivery system will allow to create the PGR . Prior to these steps you need to return the goods using 161 at MIGO.Please check this 161 stock posted to stock in transit.After PGR system will clear the stock in transit.
    Now after claring the stock from transit try cancelling the MIGO 161 document.
    For the second query,
    Please review your question' When we make return STO from store to DC, ths stocks are issued at DC MAP (condition type P101)
    Assume we issue 9 quantity from Store then
    Store stock is 9 ea, stock value is (1000-(25*9)) = 775, MAP is 775/1 = 775
    This transaction is causing major flactuation in store MAP (100 changed to 775),
    Please review the third line.
    Regards,

  • Mapping issue in idoc to JDBC scenario

    mapping issue in idoc to JDBC scenario
    source structure
    E1KNB1M
      BUKRS = 1000
    E1KNB1M
      BUKRS=  9000
    E1KNB1M
      BUKRS=  2000
    THE NODE E1KNB1M is repeated many times and the field BUKRS is also repeated with E1KNB1M as above
    TARGET field : ISFRANCHISE
    if any where value of BUKRS =9000 we have to pass Y to the target filed, else N
    if BUKRS = 9000   THEN ISFRANCHISE= Y
                   ELSE
                ISFRANCHISE=N
    I've done the mapping as below
    BUKRS = 9000--> IF THEN Y ELSE N--
    > ISFRANCHISE
    BUT everry time the target value is N only
    pl suggest
    rgds
    mojib

    mapped like this
    BUKRS--->SORT---->
                                                 EQUALS --------IF---THEN    Y
    9000------------------------>                                               ----------------->ISFRANCHISE
                                                                  ELSE   N
    context of BUKRS set to parent node
    its worked
    thanks to all for valuable suggestions
    rgds
    mojib

  • Same Sender and Receiver File Name. Pls advice urgent

    Hi All,
    My sender file name is auto generated number so
    it is dynamic in nature.
    ex. "abc1.txt"
         "abc2.txt"
    Now In my Sender File Adapter I cannot give
    File Name hard coded as my sender file name is auto generated number.
    Also I want same file name received at receving end.
    File Sender --   "abc1.txt"
    File Receiver -- "abc1.txt"
    File Sender --   "abc2.txt"
    File Receiver -- "abc2.txt"
    Pls advice.
    Regards

    Hi Rider,
    All your sender files have .txt extension but the name is not constant(dynamic in nature).Than in this case to pick ur file u can use the *.txt as ur sender file name.Than all the files with .txt extension in the source folder specified would be picked.
    Than u can proceed in the same way given in this blog
    /people/michal.krawczyk2/blog/2005/11/10/xi-the-same-filename-from-a-sender-to-a-receiver-file-adapter--sp14
    Please let me know if u need any information
    Thanks,
    Bhargav
    Note:Award points if found useful

Maybe you are looking for