0CRM_LEAD_H

Dear All,
Requirement : I need fields 'TYPE 'and 'IMPORTANCE' from the data source 0crm_lead_h in my Bex report.
Issue : Both the field are available and having data in RSA3 but when i check the datasource in RSA6 and BI system these fields are not available .
Steps Taken: reactivated the data source in RSA5 and replicated it again but with no results.
Any sort of help will be highly appreciated.
Thanks & Regards,
Apoorva Dewan

Hi Krish,
Yes, there are lots of fields in structure but only required fields in data source; this is common in CRM data source development. If you want to understand it, better go to BWA1 and type your data source, under tab mapping whatever fields mapped that fields only you can see in your data source.
if see a field in extract structure tab, that is required to your data source,
There are two concepts
1. go to mapping module and find out whether your extractor feeding the data for your required field, if it yes, just go to selection tab and give your field ,segment and segment field name, under extract structure field not be in hide
2. just re-copy your data source with other name not changing any underlying bdoc and mapping other, and do your required ones.
Thanks
Thota

Similar Messages

Installing business content for 0MKT_DSO1/0CRM_LEAD_H

Hi
I am getting an error whilst installing the business content for any DSO/Infocube.
Grouping
In data flow before.
Error : Rule (target: 0GN_PAR_LSY, group: 01 Standard Group): Syntax error in routine
where as same DSO whilst acitivated wiht diff source system has no errors.
Old source system 199 - No error whilst acitvation business content - (SANDBOX)
New source system 200- error whilst acitvation business content - (DEV)
If Grouping
Only necessary objects are selected above error is not there.
But when after new transfer rules have been created and when infopackage is run, i get another error
error : DataSource 0CRM_LEAD_H is not defined in the source system
Now no data loads for new source system.

Hi hungryRaj:
On your source system use Tcode RSA6 to verify if DataSource 0CRM_LEAD_H is active, if not activate it using Tcode RSA5.
Regards,
Francisco Milán.
Edited by: Francisco Milan on Aug 2, 2010 10:00 AM

How to update the datasource 0CRM_LEAD_H using the BWA1 t-code from CRM

Hi all,
I would like to know how I can update the extractor 0CRM_LEAD_H from BWA1 t-code in CRM.
If I see the datasource thru RSA5 the extract structure doesn't have the STATUS_LEAD field. but thru BWA1 I see the field in the extract structure, and the field has an "A" in the Selection column and I can't change it, the values could be:
Field Attribute     Short Description
A          Field in OLTP and BW Hidden by SAP
M          Selection Required, Visible
          No Selection Possible, Visibility Set
P          Selection Adjustable, Visibility Set
X          Selection Adjustable, Visibility Set
1          Pure Selection Field, Selection Set
2          Pure Selection Field, Selection Set
3          Selection Adjustable, Visibility Adjustable
4          No Selection Possible, Visibility Adjustable
The field is not In the Mapping tab.
Do you know how I can include the field in the extraction?
Regards, Federico

In CRM badis are only used to do enhancement either for EEWB or enhancements (with filter or non filter).
Still the standard exits (EXIT_SAPLRSAP_001,..004) can be used for populate the appened extract structure.
How ever you can apply some tricks to make a dynamic call to function module.. or class methods (as the subroutine call are not advisable in OOPs concept)..
Thanks,
-J

The DataSource 0CRM_LEAD_H does not exist in version A

Hi,
I am not getting any records on to BW side by any of the load(full,init/delta)
When checked RSA3 in source system(CRM) there are 5 records.
When checked RSA3 in source system(BW) it gives an error.
error:
DataSource 0CRM_LEAD_H is not defined in the source system
in (BW)Tcode RSA2 - for the DS 0CRM_LEAD_H
DataSource 0CRM_LEAD_H does not exist in version A
I checked RSA5 in crm and the DS is activated once again
Please suggest

No Nilesh,
Basis did some work around and was able to remote logon from SM59. But still the problem exist.
Now while installing business content I am getting an error (Logical system)
Error: Rule (target: 0GN_PAR_LSY, group: 01 Standard Group): Syntax error in routine
GN_PAR_LSY is an infoobject for Logical system.
Stuck up over here

CRM TERRITORY_GUID extraction to BW using 0CRM_OPPT_H/0CRM_LEAD_H

Hello,
I am using the standard extractor for Opportunity and Lead header data extraction to BW. Being TERR_GUID is a standard field on both the extractor, I always overlooked this field. But recently I saw that this field is not getting populated consistently during extraction.
I did RSA3 test in CRM system, and for some transactions, TERR_GUID is populated and for some it is not. In all cases TERRITORY is maintained while creating the transaction in CRM system. Seems strange, but this is what is happening. So just trying to understand what could be the reason. Does not seems to be extractor issue, may be some issue with Territory maintainance in CRM..not sure though.
Also I found a SAP NOTE# 1017643 for similar issue, however it is not valid for our release.
Anyone faced such problem in past. Please advice.
Regards
Pankaj

One more thing I am observing is that.... when I use one perticular Business Partner (say 'ABC'), RSA3 extract the TERR_GUID value. But when I use business Partner 'XYZ', TERR_GUID is not extracted. Is there link between BP and TERR which is not maintained correctly?

Populating standard field in to crm datasource

HI Gurus
In my crm datasource 0CRM_LEAD_H. I want to include the field " Lead status " which is a part of the
datasource. Earlier it was not a part of the requirement. Now its a new requirement. Please guide me
how to deal with it. What I have to do it in the BW Adapter and related badi(if any).
Please let me know Step by Step.
Thanks in advance
LLOYD

Have to managed to do this,
I am stuck up here
Regards
lalan

Regarding ECC 6.0- CRM and BW. URGENT....Please help!!

Dear All,
I have a small query- Are CRM and BW an integral part of ECC 6.0? I mean, if I install ECC 6.0, will CRM and BW also get installed OR Do I need to explicitly install CRM and BW after installing ECC 6.0?
If CRM and BW are an integral part of ECC 6.0, Do I need to carry out some additional steps/install add-on components(while installing ECC 6.0), to activate CRM and BW OR will it be activated by default once I am through with the normal installation process of ECC 6.0?
Thanks in anticipation!!

CRM-Customer Relationship Management
General Settings in CRM
Use
This section describes the general settings necessary for BW Integration in CRM.
If CRM is not involved in your scenario skip this section.
This step has to be carried out in the CRM system:
Integration with Other mySAP Components  Data Transfer to the SAP Business Information Warehouse  Business Content DataSources  Transfer Application Component Hierarchy
RSA9-Tcode
Confirm the security check: Do you want the content application Transfer Component Hierarchy? with YES.
If a dialog box appears requesting the user to enter a development class, enter a development class in the customers namespace and choose Save or choose Local object.
If no error message is sent the application component hierarchy has been transferred successfully.
Cross Connectivity:
It describes all settings that are necessary to connect the components of the SAP.system landscape with each other. The settings for each combination of two components to be connected are described in a separate structure node. The separate section headings make it possible to identify the activities required to connect certain components with each other. The section headings for components that are not part of the installation can be skipped
Connecting SAP BI with SAP ERP, SAP CRM
Procedure
To carry out the activity, choose one of the following navigation options in the SAP BI system:
Transaction Code     RSA1
SAP BI Menu     Modeling  Data Warehousing Workbench: Modeling
Connecting SAP BI with SAP ERP, SAP CRM
Procedure
To carry out the activity, choose one of the following navigation options in the SAP BI system:
Transaction Code     RSA1
SAP BI Menu     Modeling  Data Warehousing Workbench: Modeling
1.     Choose Modeling.
2.     Choose Source Systems.
3.     Select SAP in the window on the right.
4.     Choose the Context menu (right mouse click).
5.     Choose Create.
6.     Make the following entries:
Field     Entry
Target computer (server)                            Server of the SAP ERP, SAP CRM or SAP SRM system
System ID     System ID of the SAP ERP, SAP CRM or SAP SRM system
System number     System number of the SAP ERP, SAP CRM or SAP SRM system
Background user in source system     RFCUSER
Password for source system     welcome
Background user in BI     RFCUSER (can not be changed in this activity)
Password for BI user     welcome
9.     On the dialog box Please log on as an administrator in the following screen choose Continue.
10.     Log on to the Source System with your administrator user. Choose the correct client.
11.     On the dialog box New Source System Connection choose Continue.
12.     On the Replicate Metadata dialog box, choose Only Activate.
The building block CRM Lead Analysis describes the all the required activities to analyze the Marketing Lead Analysis data from SAP CRM in SAP Business Information Warehouse.
The analysis is carried out with the following queries of the InfoCube 0MKTG_C01 CRM - Lead Management (SAP BW Business Content).
The Lead Management InfoCube contains all the characteristics and data used for the administration of leads. This InfoCube enables you to execute the following standard queries available in SAP BW:
1.     Channel Analysis: This query is used to determine the best channels by which business partners are contacted in the context of a marketing campaign. Following each marketing campaign, the lead manager can compare the success of a given channel to those of others.
2.     Efficiency Reporting: This query is used to analyze the efficiency with which leads are qualified. By navigating to the sales organizations and the responsible employees for the leads, it is possible to assess how efficiently lead teams are working and to identify areas for improvement.
3.     Historical Evaluation: Use to help analyze and compare leads over different intervals (comparison of different quarters or years for example) to see if general characteristics in the processing of leads can be identified for these periods.
4.     Lost Leads: Provides an overview of the number of lost leads in a particular period and the reasons (implemented as a navigation characteristic) for the loss of the leads. This query is used to analyze the main reasons why leads might be lost, with a view to developing new strategies for overcoming these weaknesses.
5.     Channel Mgmt.: Top-n Lost Leads (Current Year): In a Channel Manager Portal, this query provides an analysis of the leads lost by a Channel Manager over the past 12 months. Channel Managers can also view the leads lost by their Channel Partners. In a Partner Portal, this query shows the top-n unsuccessful leads distributed by a Channel Manager to a Channel Partner. Partner Manager can see the lost leads of the Partner Employees over the year. Partner Employee can view his lost leads over the year.
InfoSources
0CRM_LEAD_H - Lead Header (Transactional Data)
0CRM_LEAD_I - Lead Item (Transactional Data)
0CRM_MIG - Mail GUID
Before starting activities in this building block, you need to perform or check the following steps:
1.     From the BW Connectivity building block the following activities have to be completed:
a.     Local Settings è SAP CRM: all activities have to be completed.
b.     Local Settings è SAP BW: all activities have to be completed.
c.     Cross Connectivity è Connecting SAP BW with SAP R/3, SAP CRM, SAP SRM: Connect your CRM System.
2.     From the General Settings for BW Integration building block the following activities have to be completed:
a.     In section General Settings in CRM all activities have to be completed.
b.     In section General Settings in SAP BW all activities have to be completed.

CRM-BW replication problem.

Hi friends,
I have edited existing Standard CRM extractor with all requried steps in CRM Dev system
Later i have activated in RSA6 in CRM Dev system and pressed Data source Transport button and further saved in CRM Dev system.
Later in BW Dev system i have created new Infosource relevent to this extractor, but It is showing old CRM extratcor without any changes.
Please let me know how can we make all new changes replication to BW Dev system.
I have also, performed replication in BW using RSA1 and also using a programe but No use.
Is i am missing any step after RSA6 in CRM?
Plz suggest.
Thanks.

HI,
Symptom
Inconsistency in the assignment of the info-object for the Territory extraction in One order datasources
If the one order Infosources are activated then the mapping of the Datasource fields TERR_GUID and PATH_GUID are assigned to the same infoobject 0CRM_TR. Therefore, activation of the infosource causes an error.
Other terms
Sales Analytics, Service Analytics, One order data Extraction, Territory extraction
Reason and Prerequisites
PATH_GUID field of the Datasource is not marked as field hidden in BW
Solution
Please note that this correction is available from the following CRM Releases
CRM 4.0 SP08
The correction is relevant for the following datasources
0CRM_LEAD_H
0CRM_LEAD_I
0CRM_OPPT_ATTR
0CRM_OPPT_H
0CRM_OPPT_I
0CRM_QUOTATION_I
<b>0CRM_QUOTA_ORDER_I</b>
0CRM_SALES_CONTR_I
0CRM_SALES_ORDER_I
0CRM_SRV_CONFIRM_H
0CRM_SRV_CONFIRM_I
0CRM_SRV_CONTRACT_H
0CRM_SRV_PROCESS_H
0CRM_SRV_PROCESS_I
In order to have this functionality available, please re-activate the datasource in the OLTP (CRM system) and replicate the datasource in the BW systems
The correction is the following:
The Datasource had the fields Territory Guid and Path Guid. The path guid should be marked as Field hidden in BW.
Or in other words in the datasource maintenance in the transaction BWA1, for the extract structure tab, the field PATH_GUID should have the value for Selection as 'A'.
If you still have any problems, do let me know.
regards,
ravi

Problem in extraction ?

Hi,
I'm extractind CRM datasource 0CRM_LEAD_H ,by usibng this datasource we are loading BI content cubes 0MKTG_C01 ,i did each step correctly,after creating infopakage and schedule ...data was alos requested...but when we try to see in monitor...it showing running status in yellow..we wait allmost 2 hours but ut still in yellow status..
In CRM datasource have only 86 records only..
Could any help on this issuse..
Thanksin Advance ,
Vasu..

hi Vasu
go again in to the monitor and check the treatment part (the last steps) by develeoping the hierarchy you will get more detailed information.
Maybe the data load check the presence of another master data.
otherwise if you are sure that there is no errors and that the yellow color remains go to the infopackage with the menu go for pass to succesfull if status remains yellow.
hope this helps
regagrds
Boujema

Error in data upload from CRM to BI

Hi all,
Kindly help me with this error.
An exception occurred. This exception is dealt with in more detail below
. The exception, which is assigned to the class
'CX_SY_DYN_CALL_PARAM_NOT_FOUND', was neither
caught nor passed along using a RAISING clause, in the procedure
"SMOX3_GET_DATA" "(FUNCTION)" .
Data Source - 0CRM_LEAD_H. Error occured in RSA3 , in CRM

Hi Anup,
Check OSS Note 857278 - Generating DataSources with BWA adapters returns errors.
I am pasting the content of the note here:
Symptom
When you generate new fields from BWA DataSources, the system issues an error message:
"DataSource cannot be generated"
This affects the DataSources that use the CRM_BWA_GET_DATA_WITH_ARC extraction module:
0CRM_COMPLAINTS_I
0CRM_LEAD_ATTR
0CRM_LEAD_H
0CRM_LEAD_I
0CRM_OPPT_H
0CRM_OPPT_I
0CRM_QUOTATION_I
0CRM_QUOTA_ORDER_I
0CRM_SALES_ACT_1
0CRM_SALES_ACT_I
0CRM_SALES_CONTR_I
0CRM_SALES_ORDER_I
0CRM_SRV_CODES
0CRM_SRV_CONFIRM_H
0CRM_SRV_CONFIRM_I
0CRM_SRV_CONTRACT_H
0CRM_SRV_IBASE_TRAN
0CRM_SRV_PROCESS_H
0CRM_SRV_PROCESS_I
Other terms
EEW, CRM_BWA_GET_DATA_WITH_ARC, 0CRM_COMPLAINTS_I, 0CRM_LEAD_ATTR,
0CRM_LEAD_H, 0CRM_LEAD_I, 0CRM_OPPT_H, 0CRM_OPPT_I, 0CRM_QUOTATION_I, 0CRM_QUOTA_ORDER_I, 0CRM_SALES_ACT_1, 0CRM_SALES_ACT_I, 0CRM_SALES_CONTR_I, 0CRM_SALES_ORDER_I, 0CRM_SRV_CODES,
0CRM_SRV_CONFIRM_H, 0CRM_SRV_CONFIRM_I, 0CRM_SRV_CONTRACT_H, 0CRM_SRV_IBASE_TRAN, 0CRM_SRV_PROCESS_H, 0CRM_SRV_PROCESS_I
Reason and Prerequisites
To determine whether you had BWA or SAPI DataSources, only SMOX3_GET_DATA was checked for, since up to now the usage of CRM_BWA_GET_DATA_WITH_ARC was unknown.
Solution
Import Support Package 04 of SAP_ABA 7.0, Support Package 14 of SAP_ABA 6.40 or Support Package 54 of SAP_ABA 6.20 or implement the specified advance correction.
When you implement the advance correction for SAP_ABA 6.20, bear in mind that Note 605469 is a prerequisite for this release.
After you implement this note, also implement Note 996352, so that the system will use the correct extractor.
Bye
Dinesh

Enhancment CRM data source

Hi,
I have enhanced CRM data source 0CRM_LEAD_H with "store"(which is customer master) as a Partner function with component type CRMT_ACTIVITY_PARTNER(Activity Partner) in Extract Structure.Now i need to write User Exit can any one help me out with fom which table and field i should take into ABAP code.When i see in the transanction CRMD_ORDER partner is coming from the STRUCTURE(not like in ECC which comes from VBPA, the same enhancement was done in ECC vbpa-knn1.).
Can any one help in coding.
Thanks in advance
Ram

you have to do the enhancment for the same.
it can be done using a badi def .
in sbiw tcode u can go to setting for appln specific datasource (CRM) and enhance the datasoure using a badi.
u can check the help there and proceed accordingly...
for getting the activity partner use FM CRM_ORDER_READ it works in the same fashin as tcode CRM_ORDER.
I hope this is clear if not let me know.

ERRORS OCCURED DURING EXTRACTION USING RSA3

Dear Folks,
I have an error in production client & that is when i am doing test extraction for standard datasource using RSA3 i am geting following error:ERRORS OCCURED DURING EXTRACTION.
I checked the log and message is extraction program failed as it is called by an invalid infosource or object 0crm_lead_h.
note:0crm_lead_h is the DS
Any help
Thanks

Hi ,
Please follow below thread , it will solve ur problem.
Errors occurred during the extraction, Message nos. RJ012 & R3009
Hope this will help you...
Thanks,
Jitendra

CRM Campign Question

hello
I have 2 fields known as
0CRM_MIG CRM Mailing Item GUID
0CRM_OHGUID GUID of a CRM Order Object
I am not able to come to know when do these fields get generated. Please can someone who has worked on campaigns let me know when are these fields populated.

0CRM_MIG - Mail GUID is the Infosource to load CRM Lead Management data in BW. Please check link below. Normally as per CRM lifecycle, Lead are generated in CRM and they are analyzed whether Won or Lost through BW report. Hence you implement Lead Management in BW. For Lead, you load from following infosources.
InfoSources
0CRM_LEAD_H - Lead Header (Transactional Data)
0CRM_LEAD_I - Lead Item (Transactional Data)
0CRM_MIG - Mail GUID
http://help.sap.com/bp_biv335/BI_En/BBLibrary/documentation/B72_BB_ConfigGuide_EN_DE.doc
For 0CRM_OHGUID, see the below link.
http://help.sap.com/saphelp_nw04s/helpdata/en/41/34c64b5c2531fbe10000000a114e5d/content.htm
It is one the infoobject used in cube 0UCCRMC03 (Clearing Costs). This InfoCube enables you to analyze the cost-related actual key figures in the area of CRM utility contracts for commercial and industrial (C&I) customers. CRM characteristics such as the business partner, the CRM utility contract, and the CRM product can be used in the analysis.
Abhijit

Loading Help on MD and ODS?

HI ,
I'm loading CRM data in to ODS.
My Question are :
1) for exmple i need to load DS:0crm_lead_h in to ODS:0mkt_ds01,
First i need to load master data or we can load directly in to ODS?
2)if i load directlyCRM to ODS ,then master data fields are also loading or not ?
Thanks,
Vasu.

1) for exmple i need to load DS:0crm_lead_h in to ODS:0mkt_ds01,
First i need to load master data or we can load directly in to ODS?
2)if i load directlyCRM to ODS ,then master data fields are also loading or not ?
You can load transaction data w/o the master data with no errors.
Infopackage - Update Tab - Select " Load Transaction data even if no master data "
If you select "Donot load transaction if no master " it may fail with NO SID errors.

Lead Analysis in Telesales

I would like to calculate total number of accounts created,number of oppurtunities created,number of emails entered,number of sale amount by a particular sales rep which belongs to particular sales group.Can any one provide me help where I can find the particular info mentioned above.

hi Devendra,
check if helps oss note 761577-User status is not extracted for 0crm_lead_h datasource
Symptom
The user status is not extracted for lead header even after creating a user status in the customization.
Other terms
user status,extraction,crm-bw data exchange,0crm_lead_h
Reason and Prerequisites
This was caused due to a program error.
Solution
Implement the attached corrections.
692195-FAQ: Sales Analytics and CRM-BW data Extraction
Question 10: What do the status BWSTONESYS0 , BWSTONEUSS0,BWSTTECSYS0 and various other BW status mean ?
Suggestion 10: The BW status are used to extract system and user defined status.
The BW status are defined in the customization settings in SPRO.
Check for-> Status Concept for BP/Product/CRM objects
Here goto-> Process user status You will find the documentation attached here for the user status. Going inside the transaction you will find the status groups USS0, ZIOP,ZMOP etc. The names of the various BW status are derived from this For ex. BW + ST+ One + USS0 gives the name of the field BWSTONEUSS0 or BWST + ONE + ZMOP = BWSTONEZMOP (Master opportunity values) (which means BWST + (status group name) + status object group name) Double clicking on any of the object groups will take you to the values that these status can have . For ex. BWSTONEUSS0 in your system can have values E001 ,E002,E003,E007 which will be shown in RSA3 as BW status values 1,2,3,7, respectively.
Similarly we have Goto -> Process system status (in SPRO). Here you can get the values for the system status in exactly the same way as BWSTONESYS0(Lifecycle status) , BWSTTECSYS2 (Error) etc. In RSA3 you get the names as BW status, To know which corresponds to which status here,Goto the record list in RSA3 . Here goto Settings - Layout -Current . Right click -> Press Show technical field names . You will be able to see the BW status names and will be able to adjust the layout accordingly.

0CRM_LEAD_H

Similar Messages

Maybe you are looking for