0CRM_OPPT_H Infosource extraction problem (no transfer rules from Content)

Hi there,
I'm having a problem with 0CRM_OPPT_H infosource on BW 7.0 and Content version 703 SP9.
After activating the object from content there is no transfer rules for header infosource, item infosource is ok and I'm getting data. I've tried to created a DTP from scratch but I'm not geting data from source system. I've tested getting data from source system with RSA3 extraction test and it's working fine.
I've been checking on sdn and tested changing authorizations but it doesnt work.
Any ideas ??? It's normal I'm not getting transfer rules from content? Why I can not assing Datasource 0CRM_OPPT_H to inforsource 0CRM_OPPT_H??
Thanks in advance,
Regards,
Carlos

I believe I had the same problem as you did. When you're installing the Business Content in BI you have to make sure BI knows which source systems you're installing BC from.
Go to RSA1 -> BI Content
In the Edit drop down menu choose "Source System Assignment"
Make sure your CRM and BI system are checked in the window that pops up. Try collecting for the 0CRM_OPPT_H again and see if the objects you're missing show up this time. If that doesn't work search through the specific object types for items you're missing. For example, search transfer rules for "0CRM_OPPT*" or just "0CRM_OPPT" (i'm not sure if the wildcard is valid in this instance) and see if what you're looking for shows up in the list.
Hope this helps.

Similar Messages

I have installed ACDSee Pro3 and have problem to transfer photofiles from device: I got the message; The item could not be edited because you do not have sufficent access privileges or destination volume is no longer available." What can I do?

I have installed ACDSee Pro3 and have problem to transfer photofiles from device: I got the message; The item could not be edited because you do not have sufficent access privileges or destination volume is no longer available." What can I do?

Ask the ACDSee Pro support personnel.
With iPhoto that message means the library is a referenced library (photo not copied when imported into iPhoto's structure) and the source file is not where it was when first added to the library. I don't know how ACDSee works. Does it have a referenced mode as opposed to copying photos into its structure?
OT

How to delete unwanted transfer rules from the pool

Hi experts,
I want to know how to delete the unwanted transfer rules from the pool on the right hand side of the transfer rules. I realized I don't need them. I get a warning icon with them sitting in the pool.

You can't delete it yourself. All you can do is hide it so it doesn't appear on your purchased list, as explained here: iTunes Store: Hiding and unhiding purchases. iTunes store support may be able to do this for you if you contact them by filling out this form: https://ssl.apple.com/emea/support/itunes/contact.html.

Move Transfer rules from BD1 to BQ1

Dear Friends,
How can we Create and Move the Transfer rules from Development system(BD1) to Quality System( BQ1)
Regards
Ramana

Hi Ramana
Follow these steps to collect your objects in a transport.
1. In RSA1, you have a tab "Transport Connection" on the left pane. Click on it and you will see various options, for Ex, InfoObjects, DataSources, DTPu2019s etc.
2. Click on the InfoObjects and expand it, there you will see "Select Objects" option. Double click it and then a windows pops up. You need to put the object names and say Transfer selections.
3. All you objects will be collected on the right pane. It might collect other related objects like DSO (if those objects are being used in that), the corresponding DataSource, DTPu2019s etc. If you donu2019t need them deselect them and then click on the "Truck" icon on the top.
4. It will ask for a transport number, there you can click on the "NEW" icon and it will create a new transport for you. All your objects will be collected in that TR.
To Move the TR
1. Go to SE10 and select your TR (one u create above).
2. Expand it and click on the Sub-TR. Then click on the Truck icon on the top to release the TR.
3. Similarly release the actual TR by clicking on the Truck icon.
4. Go to T-code STMS and move this TR to the desired environment.
Thanks in SDN points
Regards,
Ramana Paruchuri

Problems with Transfer Rules

I have the following message when I try to open a transfer rule
Transfer Rules 2LIS_03_S642_BB are Missing
InfoSource Extraction using 2LIS_03_S642
Cannot Restore
You Now Have to Recreate All Rules with Changes
Do You Want to Create this Identifier Now?
If I say yes it does not allow me to since it asks me to specify a transport which I do but it cannot recognise. Does anyone have a solution? I have run the programs RSAR_TRANSTRUCTURE_CHECK and RS_TRANSTRU_ACTIVATE_ALL which makes no difference. Thanks

hi Niten,
possible your infosource assigned with datasource that source system not exist anymore ?
if no own created routines in transfer rules, perhaps try to activate again from business content infosource 2LIS_03_S642 with dataflow before ?
hope this helps.

Copy transfer structure transfer rules from one client to other client

Hi
Our R3 client 100 is mapped to BW client 100.
R3 client 100 is source system in BW.
As the master data is created by users in R3 client 200 we want to get the data from client 200 to BW. We dont want to replicate each datasource and do all stuff form scratch for client 200.
Now the question is as we need to create transfer rules, transfer structure for all master data objects for client 200 in BW.
1. Going to create R3 200 client in BW.--this is possible.
2.Like create a transport connection in BW for client 200 for all master data infoobjects transfer rules transfer structure,process chain, infopackages..etc
3.Do the source system mapping for new client 200.
4.and then execute the process chain..
What are the best ways to achieve this.
creating all transfer structure and transfer rules only for those we are loading daily ..rather than all active ones.. How can I get the list of that master data that is loading daily.. and how easily can I create transfer structure..etc dependent objects in one go than manually.
Any help or thoughts are appreciated..
can anyone throw some light please....

Hi,
BW is not client dependent!!! When you sign on to BW, you have the client required. However, this field does not appear in any table (master data, ODS, cubes, whatever).
This means that a same BW server with a single client can have multiple R/3 connections (for multiple R/3 clients).
The database do not care about the client in BW. The data will be consolidated.
So, you do not need any new client in BW, just two R/3 connections for your two clients.
Regards,

Problems to transfer photos from Vista to iPod Nano

I´m working with a HP Pavillion laptop based on Vista and an iPod Nano. General connection is ok and I can transfer music. But I have problems to transfer photos. The PC blocks as soon as I start file transfers. In some cases photos are transferred, but quality is very lousy
What can I do?
Oliver

iPod:
http://discussions.apple.com/category.jspa?categoryID=146
iTunes for Windows
http://discussions.apple.com/category.jspa?categoryID=150

Problem to transfer songs from iMac to iPhone 4

Hi folks!
Since I formatted my Mac I can not transfer music from my HD for the iPhone. Can you help?
I'm using OSXLion and iOS 5
Cheers!

Hi Ana,
When I select and drag music onto my iPhone in iTunes it just does not transfer.
I know, it's bizarre
Cheers

Problem in transfer rules-- Calling the function module.

Hi All,
when we r extracting the data from r3, the infoobject 0wbs_elem the data pulled is in internal format in which wbs element is stored.
wbs element gets stored in a different way compared to front end.
Eg. The external format is /abc/123 the internal format is 00012300.
I have written a transfer routine using the function module CONVERSION_EXIT_ABPSP_OUTPUT.
the code goes like this
data ifield(30) type c.
call function CONVERSION_EXIT_ABPSP_OUTPUT
Exporting
input = tran_structure-wbselem (Field in transfer structure---name of the field in source system) .
Importing
output = ifield.
result = ifield.
End of code.
Problem
When I am Scheduling the package the job doesnt get completed for a long time and fails.Is there a problem with the code. When trying for the Simulation of the datapackets, the system says no data package number could be determined.
Please help me out...
Thank You
Mahesh

Hi Mahesh,
Could you please check ST22 and see if there is any short dumps ?
try to do test run for the FMs using SE37 and see what is the output for your input.
Do you have PSA for the load ? It may also have been deleted. You get this message when there is no PSA available.
hope it helps
Thanks
Soumya

Problem with transfer photos from iCloud to Aperture

Hi, I have a problem with APERTURE. I Can't transfer a photos from iCloud to project of Aperture. I have Macboook Pro 15, model 8,2 with MAC OS X Maverick and Aperture 3.5.1. Who can help me ? Many thanx.

If I want to work them I have to transport these photos to some folder or project in aperture but unurtenetly It doesn't work.
Now I see. You should be able to drag any image from your photo stream to a project (not to a folder).
For example:
Or set your Aperture preferences to import automatically:
That will create monthly projects -
Does that not work?

Shared Services 11.1.1.3 - Problem importing Bus Rules from LCM Exports

Hi,
We have some Bus Rules in Calc Mgr that are named the same as the corresponding webform. For instance, a bus rule may be named '2.1.4 - Budget Load'. When we export all bus rules and then try and import them in to target (can be same server), they say they were successful, however none show up in Calc Mgr. After exhaustive testing, we took out the period (.) in the name and made it '2_1_4 - Budget Load' and it worked fine and migrates ok. My question is if anyone knows if this is a know issue bug or are periods not allowed like parens in Bus Rules names? It's weird as I swear this was working on a earlier version of Shared Services. We are upgraded to the latest patch on Shared Services too.
Anyone have an older version of 11.1.1.3 Shared Services that they can test this on for me? Thinking Oracle may not have regression tested :)

Straight from Oracle Support.... What a joke their regression testing is.....
Thank you for your updates.
I found the following Bug for 11.1.1.3. It is as follows :
"Bug 8489999 - Filenames without ext, with artifact ids containing "." are not migrated. "
According to the Development Team, it is validated with Drop 5 build 17.
When discussing this issue with the Development Team earlier today, they wanted to check if this behaviour is noticed even when using 'admin' and Application Owner Account.

Problem in standard routine 0RPM_DSKF in transfer rules 0rpm_role_d

HI all,
I am extracting the data from xRPM 4.0 to BW 7.0.Even though i am using BI 7.0 presently we are using 3.5 only.I have installed the transfer rules after that i am trying to activate the transfer rules .But i am getting the error with standard routine ( Syntax error ) written In transfer rules for one key figure 0RPM_DSKF.
Data source : 0RPM_ROLE_D
Data Target : 0RPM_C02
Info Source : 0RPM_SRAR_02
Routine :
if TRAN_STRUCTURE-&RU& <> 'FTE'.
RESULT = TRAN_STRUCTURE-ANUMBER.
else.
RESULT = 0.
endif.
There is no filed inT.Stru contains RU.
Please suggest me what would be the solution for this.
If is there any relavant OSS Note plz provide me that and also provide me the valuable suggestions.
Thanks & Regards
Ramakanth

Hi Rathy!
Thank you very much for your quick help! Usually I do the same. Now I faced with BI system, where data source were already activated in system A and replicated. I can see all needed active sata source un BI already. But I can not see transfer rules in content!
What you can advise?
Reagrds, Iryna.

Error in Infosource, transfer rules transportation

Hi
I transport the datasources from R/3-DEV to R/3-QA systems . And those are transported successfully. Then i replicated the datasources from
R/3-QA system to BI-QA system.
Now im trying to tranpsort the InfoSource, Transfer rules from BI-DEV to BI-QA system then it says that
<b>DataSource 1_CO_PA_COST does not exist in source system QS1CLNT400 of version A.
QS1CLNT400 - R/3 QA system.</b>
Pls let me know what i need to do
kumar

Hi Ravi,
check in RSA6 whether ur DS is there or not.
If it is not available,then check in STMS whether the transport has been imported or not.If you do not have authorisation to STMS,ask ur Basis guys to check that.
Thanks & Regards,
Suchitra.V

Activate transfer rules - problem

I was creating transfer rules for DSO 0FIGL_O02 for infosources 0FI_GL_4. Activate transfer rules bring me mistake :Data element for InfoObject BELNR 0AC_DOC_NO could not be created.
Information from log:
Data element for InfoObject BELNR 0AC_DOC_NO could not be created
Message no. RSAR274
Diagnosis
Special data elements of the type and length of the source system are required for creating the transfer structure. Errors occurred while creating a data element of this type for InfoObject BELNR 0AC_DOC_NO. The data element should be of type CHAR and length 000010. The technical name of the data element is /BIC/OW_######################.
Procedure
Check the log.
Check data element /BIC/OW_###################### in the repository. Activate data element /BIC/OW_###################### in the repository and check the activation log, if necessary.
0AC_DOC_NO - is important because this is key in DSO. This object have type CHAR and length 10. What i shoult do?

Hi,
Activate the Infoobject 0AC_DOC_NO is not recognizing by system please re-activate this once again and check the transfer rules.
Regards,
Anand Tej.

Content for 0REFX_3 transfer rules missing.

Hi folks
We are trying to implement content for 0REFX_C03 cube. But the transfer rules from datasource to infosource 0REFX_3 is missing from business content.
Inorder to get that we have implemented SAP note
BW transfer rules missing in delivery
SAP Note Number: 1246385
And we installed BI_CONT 704 SAPK-70401INBICONT New support pack for BI content.
It leads to weird changes in the system like previously available objects in BI content are missing.
Did any body encountered same problem.

Hi,
We are having the same problem - no transfer rules for 0REFX_C03.
Currently on BI_CONT 735 Level 003.
Did this problem get resolved?
Any help greatly appreciated.

0CRM_OPPT_H Infosource extraction problem (no transfer rules from Content)

Similar Messages

Maybe you are looking for