0CRM_SALES_ACT_1 Cancelled in Source System

Hi, I'm having problems with a BI7 dataload, from our CRM source system, based upon the 0CRM_SALES_ACT_1 datasource. I've cleared down the data in my related InfoProviders, deleted all PSA requests and previous Delta Inits, and I'm now trying to load a new Init with Data Transfer. The job progresses so far (229,398 records) and then gets cancelled in the source system with the error message: "User is not integrated into organizational structure"
I've done some searching on SDN and can't find anyone posts with the same issue - my apologies if I've mised the key one.
I've reactivated the transfer structures using the activate all program in se38, and carried out an RSRV on the InfoProviders.
It was working when I last reloaded the data a few weeks ago, so something has changed either on the source system or the BI7 system since then, but I can't figure out why it's suddenly getting cancelled at source. It's also taking over 16 hours to get to this stage, whereas the last successful Init ran in four hours.
I've included the last part of the job log from the source system, showing the last successful data package and then the final system error message.
Any advice or help on this would be greatly appreciated.
01.07.2010 10:02:20 Asynchronous send of data package 38 in task 0042 (1 parallel tasks)
01.07.2010 10:02:20 tRFC: Data Package = 37, TID = AC10026B18944C2C4F29EB3A, Duration = 00:00:02, ARFCSTATE =
01.07.2010 10:02:20 tRFC: Start = 01.07.2010 09:17:44, End = 01.07.2010 09:17:46
01.07.2010 10:51:54 Call customer enhancement EXIT_SAPLRSAP_001 (CMOD) with 5,882 records
01.07.2010 10:51:54 Result of customer enhancement: 5,882 records
01.07.2010 10:51:54 Asynchronous send of data package 39 in task 0043 (1 parallel tasks)
01.07.2010 10:51:54 tRFC: Data Package = 38, TID = AC10026B1A7C4C2C599D01C0, Duration = 00:00:02, ARFCSTATE =
01.07.2010 10:51:54 tRFC: Start = 01.07.2010 10:02:20, End = 01.07.2010 10:02:22
01.07.2010 11:09:00 User is not integrated into organizational structure
01.07.2010 11:09:00 Job cancelled after system exception ERROR_MESSAGE
Kind regards,
Jeff.

Hi, there's no short dump.
Kind regards,
Jeff.

Similar Messages

Jobs are cancelled in source system

hI all,
i scheduled process chain. load was chain was failed .failed request is showing jobs are cancelled in source system? why jobs are cancelled in source system & how to solve this error.
Thanks,
chandu

Try to repeat the process manually, as a temporary fix.
Check in SM58 and BD87 for pending tRFCs and IDOCS and puch them using F6
But you can analyze as advised by BR and Venugopal.
Hope it helps,
Naveen
Edited by: Naveen Vytla on Jul 21, 2008 2:46 PM

WHEN I CREATE SOURCE SYSTEM IN BW

Hi,
When i create source system in BW it is automatically saying that it has
RFC Destination already exists in the source system. Do you want to transfer,check this
destination or cancel the source system?
it has three option copy,check,cancel
i have done check, copy..it says
RFC CONNECTION CHECK FAILED.CHECK CONNECTION.
Please help

Hi,
1. Check for parameters specified .e.g. password. user name , authorization for the user , ip address etc.
2. While creating source system 1st time in the BW , R/3 client should be open and its status should be changes allowed
.(SCC4-> Double click the client ->
Changes to transport & client specific setting
Changes without automatic Recording
Cross Client object changes
Changes to repo. client ind. object allowed
Hope that helps.
Regards
Mr Kapadia

Unable to kill or cancel the job in source system

Hi gurus,
   got a error , while loading delta for line item ods in AR.
stating as the job is not ended in the source system.'
i find the job in the source system and it is active.
   i tried to kill that job from sm37, its not happening,
and tried to cancel from sm50 even its not happening.
kindly suggest how to cancel or kill that job.
its urgent plz.
pramod

Hi,
        Check If u r system is running on more than 1 server...kill your job with proper appropriate server in tcode SM51.And also after killing the job come to SM37 check that particular job, nd on top menubar,u will 'check job status'.Then do refresh.
Hope this helpful to you.
Regards,
Praveena.

Job Cancelling in the Source System

Hi,
Few days back (one week) our R/3 System upgraded with ECC 5.0, from that day onwards some of the master data loads failed.Whenever we retriggered the infopackage the Job in the R/3 side was immediately(automatically) cancelled.(we tried 3times).
So, please give any suggestions how to get rid of these errors.
Best Reagards
Shyam/venkata

Hi,
well basically we need some more information. Do you get any job logs, system log entries (sm21) or short dumps (st22) in the source system as well as the BW system? What messages do you get in the request monitor?
Keep us updated!
Siggi
PS: in the meanwhile this might be of some help: /people/siegfried.szameitat/blog/2005/07/28/data-load-errors--basic-checks
Message was edited by: Siegfried Szameitat

Data load problem - BW and Source System on the same AS

Hi experts,
Im starting with BW (7.0) in a sandbox environment where BW and the source system are installed on the same server (same AS). The source system is the SRM (Supplier Relationship Management) 5.0.
BW is working on client 001 while SRM is on client 100 and I want to load data from the SRM into BW.
Ive configured the RFC connections and the BWREMOTE users with their corresponding profiles in both clients, added a SAP source system (named SRMCLNT100), installed SRM Business Content, replicated the data sources from this source system and everything worked fine.
Now I want to load data from SRM (client 100) into BW (client 001) using standard data sources and extractors. To do this, Ive created an InfoPackage in one standard metadata data source (with data, checked through RSA3 on client 100 source system). Ive started the data load process, but the monitor says that no Idocs arrived from the source system and keeps the status yellow forever.
Additional information:
BW Monitor Status:
Request still running
Diagnosis
No errors could be found. The current process has probably not finished yet.
System Response
The ALE inbox of the SAP BW is identical to the ALE outbox of the source system
and/or
the maximum wait time for this request has not yet run out
and/or
the batch job in the source system has not yet ended.
Current status
No Idocs arrived from the source system.
BW Monitor Details:
0 from 0 records
but there are 2 records on RSA3 for this data source
Overall status: Missing messages or warnings
- Requests (messages): Everything OK
o Data request arranged
o Confirmed with: OK
- Extraction (messages): Missing messages
o Missing message: Request received
o Missing message: Number of sent records
o Missing message: Selection completed
- Transfer (IDocs and TRFC): Missing messages or warnings
o Request IDoc: sent, not arrived ; Data passed to port OK
- Processing (data packet): No data
Transactional RFC (sm58):
Function Module: IDOC_INBOUND_ASYNCHRONOUS
Target System: SRMCLNT100
Date Time: 08.03.2006 14:55:56
Status text: No service for system SAPSRM, client 001 in Integration Directory
Transaction ID: C8C415C718DC440F1AAC064E
Host: srm
Program: SAPMSSY1
Client: 001
Rpts: 0000
System Log (sm21):
14:55:56 DIA 000 100 BWREMOTE D0 1 Transaction Canceled IDOC_ADAPTER 601 ( SAPSRM 001 )
Documentation for system log message D0 1 :
The transaction has been terminated. This may be caused by a termination message from the application (MESSAGE Axxx) or by an error detected by the SAP System due to which it makes no sense to proceed with the transaction. The actual reason for the termination is indicated by the T100 message and the parameters.
Additional documentation for message IDOC_ADAPTER 601 No service for system &1, client &2 in Integration Directory No documentation exists for message ID601
RFC Destinations (sm59):
Both RFC destinations look fine, with connection and authorization tests successful.
RFC Users (su01):
BW: BWREMOTE with profile S_BI-WHM_RFC (plus SAP_ALL and SAP_NEW temporarily)
Source System: BWREMOTE with profile S_BI-WX_RFCA (plus SAP_ALL and SAP_NEW temporarily)
Someone could help ?
Thanks,
Guilherme

Guilherme
I didn't see any reason why it's not bringing. Are you doing full extraction or Delta. If delta extraction please check the extractor is delta enabled or not. Some times this may cause problems.
Also check this weblog on data Load errors basic checks. it may help
/people/siegfried.szameitat/blog/2005/07/28/data-load-errors--basic-checks
Thanks
Sat

Start Routine to populate the Logical Source System

Hi Friends please help me with the below
1. Requirement : to Populate The system Date , Source System
in BI for Each load request.

1 Solution: I thought of writing the Start Routine for this but it is giving me error
syntax Error: END METHOD MISSING?????
2. Also I have requirement to populate 0sourcsys source system id, can any body help how to populate that.
Thanks
Poonam Roy
ABAP Code.
I have the End Method. what more to do.
METHOD start_routine.
*=== Segments ===
 FIELD-SYMBOLS:
 <SOURCE_FIELDS> TYPE tys_SC_1.
 DATA:
 MONITOR_REC TYPE rstmonitor.

$$ begin of routine - insert your code only below this line -
... "insert your code here

FORM STARTROUTINE
USING G_S_MINFO TYPE RSSM_S_MINFO
CHANGING DATAPAK type TRANSTRU
ABORT LIKE SY-SUBRC.
DATA: ZLOAD_DAT LIKE SY-DATUM
ZZSOURSYS TYPE RSLOGSYS
IF G_S_MINFO-DATAPAKID=1
SOURCE_FIELDS-ZLOAD_DAT = SY-DATE.
SOURCE_FIELDS-ZZSOURSYS = G_S_MINFO-LOGSYS.
ENDIF.
ABORT = 0.
ENDFORM.
ENDMETHOD.
ENDCLASS.
*-- fill table "MONITOR" with values of structure "MONITOR_REC"
*- to make monitor entries
... "to cancel the update process
 raise exception type CX_RSROUT_ABORT.
$$ end of routine - insert your code only before this line -
ENDMETHOD.

Hi,
Check whether the formula is useful here than Routine. Because you can see the Sy-datum , source system( I Guess) fields as avaialable formula elements .
With rgds,
Anil Kumar Sharma .P

Job terminated in source system -- Request set to red,SAPSQL_SQLS_INVALID_

Hi All,
can any one help on this issue.
I run the BI statistics in production and found out the error while triggering the delta's
Error message from the source system
Diagnosis
An error occurred in the source system.
System Response
Caller 09 contains an error message.
Further analysis:
The error occurred in Extractor .
Refer to the error message.
Procedure
How you remove the error depends on the error message.
Note
If the source system is a Client Workstation, then it is possible that the file that you wanted to load was being edited at the time of the data request. Make sure that the file is in the specified directory, that it is not being processed at the moment, and restart the request.
Error msg : Job terminated in source system --> Request set to red
Message no. RSM078
Job started
Step 001 started (program SBIE0001, variant &0000000000756, user ID
Asynchronous transmission of info IDoc 2 in task 0001 (0 parallel tasks)
DATASOURCE = 0TCT_DSA1
RLOGSYS = BCLNT300
REQUNR = REQU_D4GZHNLA3PSQ7XRNGL0EMV6AP
UPDMODE = D
LANGUAGES = *
Current Values for Selected Profile Parameters *
abap/heap_area_nondia......... 0 *
abap/heap_area_total.......... 2147483648 *
abap/heaplimit................ 40894464 *
zcsa/installed_languages...... ED *
zcsa/system_language.......... E *
ztta/max_memreq_MB............ 2047 *
ztta/roll_area................ 3000320 *
ztta/roll_extension........... 2000683008 *
ABAP/4 processor: SAPSQL_SQLS_INVALID_CURSOR
Job cancelled
But delta laoding for same is working in DEV...but not in prod...
Please suggest
Regards
Shweta

Swetha
finally found out the notes.
Please look into them and ask you basis to implemnt,
1161940
1106569
1145041
1146851
Please have a look and ask for implemtation in your system which are suitable for you
We also faced the same issue job termination in source system for BI Statistics
Regards#
Srini

Job was cancelled in source sytem.

Hi,
One job was in cancelled state in source system itself.How can i correct the error?how can i get the data from source sytem.could please anybody help me out on this issue please.In RSMO,in that statu tab its stating as JOB OVERVIEW,by clicking onto this its leads to,r/3.by executing this one it shows as job cancelle.update method is delta.
Thanks & Regards,
Praveena.

Hi anil,
one ODS is getting nearly 500000 of records,it is loading master data,here the problem is that in details tab processing process is well all the datapackets are getting fine data,but at transfer tab after processing of infoidocs,dataidocs should be filled,but there it self problem is getting.in status tab its is in yellow status i cant forcibly make it into green.how can i solve this issue.And please give me reply more detaily about RSODSACT tbale details,what are changes can be done by using this table.
Thanks & Regards,
Mano.

Creating source system in BW3.5

Hi all,
I create a source system connection using automatic method and fill up all entry in create source system window in next screen i give user name and password then these errors are shows
Changes to Repository or cross-client Customizing are not permitted Choose 'Display object' or 'Cancel'.
when i am going in help of that error it shows this information In this logon client any changes to repository and to crossclient customizing objects are prohibited
can anybody tell me why these errors are occur.
thx.

Hi Ankit,
As you posted yourself this message is appearing because your system is locked for any kind of editing. You need to open it to create this source system. This is generally done by a BASIS consultant.
You can go to SCC4 as mentioned above by Pankaj and open the client to create this.
Regards,
Sumit

Data extraction taking long time in source system.

Hi all,
I have created one custom datasource which is full update (not delta).
we are extracting data using function module in the source system.
it works well in Dev system but when I try to pull even 10 days data from source system to BW in production environment it generates huge log in source system. job log gets full & we have to cancel the job.
Job log looks as follows
Job started
Step 001 started (program SBIE0001, variant &0000000642922, user ID ALEREMOTE)
Asynchronous transmission of info IDoc 2 in task 0001 (0 parallel tasks)
DATASOURCE = ZDSHIPTRACKN
*          Current Values for Selected Profile Parameters               *
* abap/heap_area_nondia......... 2000000000                              *
* abap/heap_area_total.......... 2000000000                              *
* abap/heaplimit................ 40000000                                *
* zcsa/installed_languages...... DE                                      *
* zcsa/system_language.......... E                                       *
* ztta/max_memreq_MB............ 2048                                    *
* ztta/roll_area................ 6500000                                 *
* ztta/roll_extension........... 2000000000                              *
Call customer enhancement BW_BTE_CALL_BW204010_E (BTE) with 3,858 records
Result of customer enhancement: 3,858 records
Call customer enhancement EXIT_SAPLRSAP_001 (CMOD) with 3,858 records
Result of customer enhancement: 3,858 records
PSA=0 USING & STARTING SAPI SCHEDULER
Asynchronous send of data package 1 in task 0002 (1 parallel tasks)
IDOC: Info IDoc 2, IDoc No. 7775180, Duration 00:00:00
IDoc: Start = 28.01.2011 11:26:36, End = 28.01.2011 11:26:36
Call customer enhancement BW_BTE_CALL_BW204010_E (BTE) with 0 records
Result of customer enhancement: 0 records
Call customer enhancement EXIT_SAPLRSAP_001 (CMOD) with 0 records
Can someone plz tell me what can be the issue.?
Thank you

Hi
Whats logic for datasource?
can you share code here?
it might work fine after some ABAP tuning.
Regards
Sudeep

Connecting SAP BW to SAP R/3 : Creating source system manually/automaticall

Hello All,
I have created the RFC connection between R/3 and BW system .The message types also have been defined and partner profiles have been generated.
When I am trying to create SAP source system in RSA1 --> Source system it asks me for the SAP Target server name, system ID and System number. After providing this it asks for ALEREMOTE users password in source system and target system.
Shouldnt this be blank!!!
Should this be provided separately by BASIS or shoudl it be the once we define while creating RFC Connections?
Kindly reply.
Regards,
NIKEKAB

Hello,
I used my user id to login. I recieved a message :
User already exists in source system I continue:
Anothre window pops up : "Check RFC connection" and it asks
'RFC connection already exists in source system . Do you want to check, use or cancel source system connection'
Here I select Use - but i get an error : Error in source system'.
how can i track down this error.
Kindly inform.
Regards,
Nikekab

Plug-Ins and Extractors - Related to Upgrade of Source system

Hi,
We are upgrading from R3 to ECC.
Can I say that, if the Plug-in in current R3 system and the new system(post upgrade)(ECC) are same then, the extractors will also remain same ? hence, nothing will be affected in BW ?
For example, if the current system(R3) has the Plug-in as PI 2004.1 and the upgraded ECC also has the same Plug-in PI 2004.1 , Can I say that the extractors will also be the same ?
Regards,
Rekha .

You have to take care of all your deltas are picked into the bw before upgradation.
Some times you may required to replicate the data sources after upgradation.
You may lose the connection between your R3 and you BW.
Please do a souce system check after the upgradation.
You have to take care of all deltas :
As a standard practice we drain the delta queues by running the IP/ chain multiple times.
As a prerequiste we cancel/reschedule the V3 jobs to a future date during this activity.
The V3 extraction delta queues must be emptied prior to the upgrade to avoid any possible data loss.
V3 collector jobs should be suspended for the duration of the upgrade.
They can be rescheduled after re-activation of the source systems upon completion of the upgrade.
See SAP Notes 506694 and 658992 for more details.
Load and Empty all Data mart Delta Queues in SAP BW. (e.g. for all export DataSources)
The SAP BW Service SAPI, which is used for internal and BW to BW data mart extraction, is
upgraded during the SAP BW upgrade. Therefore, the delta queues must be emptied prior to the
upgrade to avoid any possibility of data loss.
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/472443f2-0c01-0010-20ab-fbd380d45881
/message/3221895#3221895 [original link is broken]
OSS notes 328181 and 762951 as a prerequisites.
http://wiki.ittoolbox.com/index.php/Upgrade_BW_to_Netweaver_2004s_from_v3.0B

Deleting a Source System in BW Prod

Hi Guys,
I am trying to delete the assignment of R/3 Production as a Source system in BW Prod but the system is not letting me- informing that:
Package ZBWD does not exist- choos display object or cancel.
The reason I am doing this is at present the source system is assigned to Infoobject 0WBS_ELEMT but I want to assign the 0WBS_ELEMT_ATTR & 0WBS_ELEMT_TEXT datasources to the 0WBS_ELEMT_ATTR & 0WBS_ELEMT_TEXT InfoSources. I would like to un-assign this datasource from 0WBS_ELEMT and assign to the InfoSources stated above.
I am trying to bring in WBS Element master data but found in Dev when I bring it in through the infoSources it is available in BW but through the 0WBS_ELEMT infoObject there is no data in the masterdata tables.
How can I delete this source system assignment in BW Prod?
Thanks
Depesh

hi Depesh,
i think system won't let you delete source system assignment in prod if it's closed for modification
(transaction scc4), if you really need to do this directly in prod, please ask basis open awhile,
have you tried delete the source system assignment in dev and transport to prod ?
regarding package zbwd not exist, check in prod if package zbwd exist,
transaction se80, choose 'package', type in zbwd,
it will display the package or ask to create new if not exist. transport package zbwd from bw dev if it's not exist in prod.
hope this helps.

ABAP CODE TO POPULATE LOGICAL SOURCE SYSTEM

Hi Friends please help me with the below
1. Requirement : to Populate The system Date , Source System
in BI for Each load request.
1 Solution: I thought of writing the Start Routine for this but it is giving me error
syntax Error: END METHOD MISSING?????
2. Also I have requirement to populate 0sourcsys source system id, can any body help how to populate that.
Thanks
Poonam Roy
ABAP Code.
I have the End Method. what more to do.
METHOD start_routine.
*=== Segments ===
FIELD-SYMBOLS:
<SOURCE_FIELDS> TYPE tys_SC_1.
DATA:
MONITOR_REC TYPE rstmonitor.
$$ begin of routine - insert your code only below this line -
... "insert your code here
FORM STARTROUTINE
USING G_S_MINFO TYPE RSSM_S_MINFO
CHANGING DATAPAK type TRANSTRU
ABORT LIKE SY-SUBRC.
DATA: ZLOAD_DAT LIKE SY-DATUM
ZZSOURSYS TYPE RSLOGSYS
IF G_S_MINFO-DATAPAKID=1
SOURCE_FIELDS-ZLOAD_DAT = SY-DATE.
SOURCE_FIELDS-ZZSOURSYS = G_S_MINFO-LOGSYS.
ENDIF.
ABORT = 0.
ENDFORM.
ENDMETHOD.
ENDCLASS.
*-- fill table "MONITOR" with values of structure "MONITOR_REC"
*- to make monitor entries
... "to cancel the update process
raise exception type CX_RSROUT_ABORT.
$$ end of routine - insert your code only before this line -
ENDMETHOD.

You have to write the code (in BI/BW) in the transfer rule (between Datasource transfer structure and infosource/info object)
There the FORM begin with
[code]USING RECORD_NO LIKE SY-TABIX
 TRAN_STRUCTURE TYPE TRANSFER_STRUCTURE
 G_S_MINFO TYPE RSSM_S_MINFO
CHANGING RESULT TYPE /BI0/OIPERSON
 G_T_ERRORLOG TYPE rssm_t_errorlog_int
 RETURNCODE LIKE SY-SUBRC
 ABORT LIKE SY-SUBRC. set ABORT <> 0 to cancel datapackag[/code]
GS_MIN_INFO structure RSSM_S_MINFO contains information on the request being processed.
G_S_MINFO. This passes technical information about the data load request,
such as requesting user, request date and time, update mode, the handling of
duplicate records, error handling flags, parallel processing flags, and what data
targets to update.
If tou want to use start-routine for optimization reasons and fill an empty field in transfer structure, the structure G_S_MINFO is available too.
[code]USING G_S_MINFO TYPE RSSM_S_MINFO
CHANGING DATAPAK type TAB_TRANSTRU
 G_T_ERRORLOG TYPE rssm_t_errorlog_int
 ABORT LIKE SY-SUBRC. set ABORT <> 0 to cancel datapackage[/code]
And stay in FORM between limits :
[code]$$ begin of routine
$$ end of routine[/code]
Update RESULT in first case, and field(s) of DATAPAK in second case.
[code]RESULT = G_S_MINFO-LOGSYS.[/code] or
[code]LOOP AT DATAPAK INTO l_s_datapak_line.
l_s_datapak_line-zzsourcsys = G_S_MINFO-LOGSYS.
MODIFY DATAPAK FROM l_s_datapak_line.
ENDLOOP.[/code]
Regards

0CRM_SALES_ACT_1 Cancelled in Source System

Similar Messages

Maybe you are looking for