0crm_sales_act_1 datasource has 0crm_mktelm blank data

Hello,
There are many Marketing campaigns created in CRM and they have a asssociated activities. We run the datasource in rsa3 and fond out that "marketing plan element" is blank. I beleive 0crm_mktelm is mapped to "marketing plan element".
Can anyone tell us why the data for "marketing plan element" coming blank??

Hi!
which data source you are refering to. I guess you r refering to 0crm_sales_act_1. Please check the linked documents for your Activities in CRM. And check whether there is proper mapping in BWA1 for your Datasource. You can see the 0crm_MKTELM filled only when the preceding document is a marketing plan for this activity.
with regards
ashwin
Message was edited by: Ashwin Kumar Gadi

Similar Messages

Is it normal that the DataSource field is blank when opening a master data

Is it normal that the DataSource field is blank when opening a master data which is also an InfoSouce in InfoSource page.
Just locate an InfoSource which is also a master data or data target where next to which is a green triangle picture icon in InfoSource page, open it, the top part (Commnication Structure) is automatically expended. Expend the lower part "Transfer_Structure/Transfer_Rules", find the DataSource field is blank. This only occurs for an InfoSource which is also a master data which have more than two data loads (e.g., one is attibute, and the other is text load) or there are two InfoPackage loads for this master data. We checked for master data with only one InfoPackage under it (e.g., only text load) and find it's OK that the datasource field is not blank when expending the lower section.
Thanks

Kevin
It's not common. If you have three Data Sources like attributes, texts and hierarchy by default attribute data source will appear on the screen and for the rest of the things we need to do dropdown and select. This is how in general it appears.
Thanks
Sat

HT4623 My email program has gone blank. When launched I just get a white frame with nothing in it. It's been fine for ages but now it's got a bug or something.Any ideas? I am up to date with software.Thanks david

My email program has gone blank. When launched I just get a white frame with nothing in it. It's been fine for ages but now it's got a bug or something.Any ideas? I am up to date with software.Thanks david

iOS: Unable to send or receive email
http://support.apple.com/kb/TS3899
Can’t Send Emails on iPad – Troubleshooting Steps
http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
Setting up and troubleshooting Mail
http://www.apple.com/support/ipad/assistant/mail/
iPad Mail
http://www.apple.com/support/ipad/mail/
Try this first - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
Or this - Delete the account in Mail and then set it up again. Settings->Mail, Contacts, Calendars -> Accounts Tap on the Account, then on the red button that says Remove Account.
 Cheers, Tom

When syncing iPod the PC lost power. once power restored synced iPod but the sleeve detail has been blanked. Also when syncing a 'miss-match' message is reported on iTunes. how do I get the sleeve detail back onto iPod?

When syncing iPod the PC lost power. once power restored synced iPod but the sleeve detail has been blanked. Also when syncing a 'miss-match' message is reported on iTunes. how do I get the sleeve detail back onto iPod?

http://ww2.cs.fsu.edu/~rosentha/linux/2.6.26.5/docs/DocBook/libata/ch07.html#excatATAbusErr wrote:
ATA bus error means that data corruption occurred during transmission over ATA bus (SATA or PATA). This type of errors can be indicated by
ICRC or ABRT error as described in the section called “ATA/ATAPI device error (non-NCQ / non-CHECK CONDITION)”.
Controller-specific error completion with error information indicating transmission error.
On some controllers, command timeout. In this case, there may be a mechanism to determine that the timeout is due to transmission error.
Unknown/random errors, timeouts and all sorts of weirdities.
As described above, transmission errors can cause wide variety of symptoms ranging from device ICRC error to random device lockup, and, for many cases, there is no way to tell if an error condition is due to transmission error or not; therefore, it's necessary to employ some kind of heuristic when dealing with errors and timeouts. For example, encountering repetitive ABRT errors for known supported command is likely to indicate ATA bus error.
Once it's determined that ATA bus errors have possibly occurred, lowering ATA bus transmission speed is one of actions which may alleviate the problem.
I'd also add; make sure you have good backups when ATA errors are frequent

How do I set blank data to date field in pdf form ?

Dear Sir,
I made PDF form by Acrobat X on Windows PC and then,
read the pdf form by acrobat reader on iPad.
Date field is included in the form.
The Acrobat version is 10.1.6 .
The acrobat reader version is 10.5.0 .
First, I put the wrong date data to the date field.
So, I tried to clear the date field.
I want to put the blank data to the date, but I think
there are no way to put the blank data on iPad
I would like to know how to reset the date data.
If that helps, I tried to the same thing on Android.
I could put blank data to the date field by BS key.
Sincerely,
PV NEXT CO., LTD.
Kiyonobu Matsuo
PVネクスト株式会社

Here is how to clear the Date field on the Ipad.
NOTE: In order for this to work that has to be another TEXT field in the PDF to get the keyboard to pop-up.
Click on Text field (this is to get the regular keyboard on screen)
Click on Date field (date spinner control will show up)
Click on SAME DATE field (spinner control will disapper)
Click on "Reset Field" on top of keyboard (date field will now be empty)
Click any where on PDF that is not another Date field (keyboard will disappear and date field will be empty)
Bingo! your free and clear.

My iPhone 4S has a blank black screen but when someone calls me I can answer it, I just can't see anything

My iPhone 4S has a blank black screen but when someone calls me I can answer it, I just can't see anything

Try a reset: hold down the home button along with the sleep/wake button until you see the apple, then let go. (No data loss)

Acrobat form with server side submit, posting blank data

Read more
Acrobat form with server side submit, posting blank data,
thanh xả tràn
I have a PDF form which gets submitted to the server using a submit (server-side) button. The data is then received in XML format by a ColdFusion component which does some validation and stores it into the database.
This PDF form is usually filled in by our clients using Adobe Reader 8 or below. While most of the times(and I mean like 96-97% of the times) everything goes well, at times we receive blank data into our database!! This renders couple of other features in our application useless as they try to parse an XML which does not exist.
I do believe that this is not a problem at the ColdFusion side because all it does is trim(ToString(toBinary(GetHttpRequestData().content))).
Does anyone has a clue as to why the data will be lost upon form submission?? I have done a lot of googling around it but in vain!

There is an outside chance someone is just playing with you and submitting a blank form. Not uncommon if someone is not too familiar with forms.

DataSource has to be replicated (time stamp, see long text)

Hi Experts,
in Production i am getting an error like below
DataSource has to be replicated (time stamp, see long text)
@5C@ Errors in source system @35@
Message no. R3016
Diagnosis
DataSource 8ZCRFAC03 does not have the same status as the source system in the Business Information Warehouse.
The time stamp in the source system is 19.04.2011 12:56:44.
The time stamp in the BW system is 19.04.2011 12:29:02.
System Response
The load process has been terminated.
Procedure
Copy the DataSource again and then activate the transfer rules that belong to it. You have to activate the transfer rules in every case, even if they are still active after the DataSource has been copied.
i replicated data source and activated transfer rules giving source system and infosource but still it is failing with same message
what went wrong not able to understand
Please help,
Thanks in Advance
Nitya

Seems to be an incorrect transport sequence:
1. First transport you DS from source system R/3 QA to R/3 Prd
2. Once it is successfully transported to R/3 PRD, Replicate DS in BI PRD
4. Now try to collect your infosource, DS, TR in transport request & try to transport it from BI QA to BI PRD.
5. Once it is successfully replicated in Production try Running the loads
It should work.
Regards
Raj

HT4623 I have a blank screen. It was working then suddenly it has a blank screen. My Ipad is still under warranty I bought it last June 4, 2013

I cannot repair or reset because it has a blank screen

Plug it into the charger for at least 30 minutes.
Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased.
Frozen or unresponsive iPad
Resolve these most common issues:
    •    Display remains black or blank
    •    Touch screen not responding
    •    Application unexpectedly closes or freezes
http://www.apple.com/support/ipad/assistant/ipad/
iPad Frozen, not responding, how to fix
http://appletoolbox.com/2012/07/ipad-frozen-not-responding-how-to-fix/
iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
Black or Blank Screen on iPad or iPhone
http://appletoolbox.com/2012/10/black-or-blank-screen-on-ipad-or-iphone/
What to Do When Your iPad Won't Turn On
http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
 Cheers, Tom

Blank Date on SDK created form

I have a text box on my form which is bound to a userdatasource of type "Date." I want the default to be displayed blank, as dates are in SAPB1 forms. However, the date displays as "12/30/99" when the underlying datasource is left unassigned or is set to "". What do I need to do to get the text box to be blank instead of "12/30/99" ?
Thanks for any help.
Mel Dodd

Hello Dodd,
I think you must unbind first the textbox from the datasource when the textbox is empty. Use the itemevent for checking the textbox. If the itemevent have captured that the textbox is not empty, bind again in the datasource to avoid invalid date inputs. Hope this helps.

Settings has a blank screen

My settings app has a blank grey screen

Do a reset, no data loss.
Hold down the home/sleep button together until you see the apple logo and then release, then wait for the phone to boot back up.

Since i updated my itunes to 10.5, my itunes store has been blank

Since i updated my itunes to 10.5, my itunes store has been blank. I cant purchase anythg from my itunes and my connection and security setting seem fine. Any ideas?

This tutorial for downgrading says you have to do this when that notice appears after you've downgraded:
iTunes 10.5 upgrades the iTunes library file and won’t let you downgrade, so you will need the prior version library file. Here’s how to go about that
5) You will need to rename iTunes Library.itl to iTunes Library.bak
6) Go into the “Previous iTunes Libraries” folder where you will find several files with dates in their names. The most recent one will have the .itl extension, but the others don’t. Copy that to the parent folder ~/Music/iTunes/ and rename it iTunes Library.itl
7) Congrats. You’re done.
from http://ismashphone.com/2011/06/how-to-downgrade-itunes-105-beta-to-itunes-103.ht ml
Can you try this and let me know if it works? *please God please GOD*

How to remove blank data from a byte array

Hi All,
How to remove blank data from a byte array. Suppose I created a byte array as byte[] b = new byte[8192] and i read the data as inputstream.read(b). If the data that has been received is only 1000 bytes length, how to find out how much data has been read or how to delete that blank 7192 bytes of data?
Thanking you,
Regards,
Shankar.

1) Always try to sidestep this by allocating only the necessary amount of space required...
2) If 1 is not possible, you will have to index byte for byte how much data was read into the array which
denotes reading byte for byte... not ideal as this is relatively slow...
Are you reading from a file?

ODBC: This Datasource has not been Registered, Please register first!

Hi,
I just installed Oracle BI 10.1.3.4, and am going to demo the new interactive dashboard to my seniors. First I need to have a database to connect to, so I go to the ODBC client to define a data source. Now I'm stuck here: Under File -> Open DataBase and get the following values to fill out:
DSN:
User:
Password:
Database:
I'm trying to connect to an Oracle database, so under DSN I choose 'ODBC data sources', but get this message everytime: ODBC: This Datasource has not been Registered, Please register first!
It doesn't matter whether I fill out the other fields or not. What's the issue?
All help apprecitated.
Thanks!

First and foremost: "BI 10.2.x"? BI EE hasn't reached beyond 10.1.3.4.0 yet.
Secondly: if you want to access an Oracle data source it's easiest to go over a TNSNAMES entry. Just install an Oracle client locally.
Alternatively, if you want to create an ODBC connection...that's got nothing to do with OBI, that's an OS topic. Assuming you're on a Windows box, it's the "odbccp32.cpl" which normally resides in C:\Windows\system32 that you're looking for (as you say you can't find it in your start menu).
Easy way: windows key + "R" (or Start --> Run...) --> odbccp32.cpl
Hth,
C.

My screen has gone blank and have now lost all my contacts

My screen on my torch 9800 has gone blank. I then plugged the device into the computer to see whether there was any downloads that would help but was told that the phone had never been synced when it had. The result meaning I have lost my contacts, etc. Please help????!!!!!

Hi and Welcome to the Community!
First things first...your data...everything else is IMHO secondary.
When you say you have synced your BB, how exactly have you done that in the past?
True synchronization with, for example, Outlook? If so, then please check Outlook (or whatever other PC Organizer app you are using) to be sure you still have all of your data...and, to be safe, copy all of your contacts and calendar to a safe PST just in case.
On the other hand, if by "synced", you mean backed up, then look on your PC for IPD files...those would be the files that store your data as of the date/time you took that backup...and they remain there, available for restore if needed.
So, please clarify your situation concerning your data before we proceed with any device diagnostics...the data is much more important than the device, and I want to be sure your data is safe before we attempt anything with the device.
Thanks and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

0crm_sales_act_1 datasource has 0crm_mktelm blank data

Similar Messages

Maybe you are looking for