0CRM_SALES_ACT_1 - Problems on Delta with several Inits

Hello Friends,
I try to load Deltas for 0CRM_SALES_ACT_1 from CRM System. Due to the amount of data I had to split Init-Loads by month.
So 1st Init Load loads 01.01.0001 - 31.12.2003
2nd Init loads 01.01.2004 - 31.12.2004
3rd Init loads 01.01.2005-31.01.2005
and from 2005 on there are monthly inits.
Now I scheduled Delta loads - but there are always 0 Data coming. In CRM System the queue is filling up - close to 1 million Data sets.
It seems 0CRM_SALES_ACT_1 can´t work when Inits are devided into several Infopackages - but I can´t load all of them in just one InfoPackage due to system sizes.
Do you have an idea where the problem ist?
Your help is really appreciated!
Angelika

hi Angelika,
in crm, delta activated with BWA5 ?
also BWA7 if necessary.
oss 692195-FAQ: Sales Analytics and CRM-BW data ...
hope thish helps.

Similar Messages

My computer has some serious problems, my iphoto only shows thumb size pics when I try to open them, i tried to rebuild my files from folders that had the pics in them. originally all the photos has a large delta with a question mark. also I can't back up

my computer has some serious problems, my iphoto only shows only shows thumb size pics when I try to open them, i tried to rebuild my files from folders that had the pics in them. originally all the photos had a large delta with a question mark. also I can't back up the library file because its not there. I went to time machune and tried to find the file but I can't find it or I am looking in the wrong place. I also lost my Idvd file, only have broken chain showing.

Details please
What version of iPhoto and of the OS?
i tried to rebuild my files from folders that had the pics in them.
Exactly what did you do and how did you do it? this ay be the cause of your issue but without details we can n=ony guess
my iphoto only shows only shows thumb size pics when I try to open them,
where do you see htis? In the iPhoto window? what does "try to pen them" exactly mean?
originally all the photos had a large delta with a question mark.
Ok - this usually has a simple solution - do you still have a copy of the library that has this problem?
also I can't back up the library file because its not there.
This makes no sense at all - all of your previous statements indicate that you do have an iPhoto library but have some problems with it
By default your iPHoto library is located in your Pictures folder and is named iPhtoo library - if tha tis not the case the you have moved or renamed it and only you know what you did until you tell us the details
I went to time machune and tried to find the file but I can't find it or I am looking in the wrong place.
Again unless you actually share what and how you are doing thing but continue to simply state abstract problems it is no possible to assist you - details on using Time Machine are here -- http://support.apple.com/kb/HT1427?viewlocale=en_US&locale=en_US -- and -- http://pondini.org/TM/FAQ.html ---
I also lost my Idvd file, only have broken chain showing.
This would be better addressed in the iDVD forum - but again unlesss yu share detailed information no one can assist
LN

Problem with severe connection fail and slow inter...

Havin problem with several automatic disconnection, slow internet and cant get inside online bt repair centre coz its sayin - this no is not provided by bt business...
ADSL Line Status
Connection Information
Line state: Connected
Connection time: 2 days, 06:57:44
Downstream: 1.122 Mbps
Upstream: 80 Kbps
ADSL Settings
VPI/VCI: 0/38
Type: PPPoA
Modulation: G.992.5 Annex A
Latency type: Interleaved
Noise margin (Down/Up): 4.0 dB / 7.2 dB
Line attenuation (Down/Up): 65.0 dB / 34.6 dB
Output power (Down/Up): 19.1 dBm / 10.0 dBm
FEC Events (Down/Up): 9019906 / 503
CRC Events (Down/Up): 656 / 131
Loss of Framing (Local/Remote): 0 / 0
Loss of Signal (Local/Remote): 0 / 0
Loss of Power (Local/Remote): 0 / 0
HEC Events (Down/Up): 5492 / 23
Error Seconds (Local/Remote): 62 / 33

as you are a business user you need to post on the business forum https://business.forums.bt.com/
this forum is for residential customer
If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

Performance Problem with several Database accesses

Hello
We have SAP ERP 2004 running on a Oracle DB 9.x and we face a strange behavior of our system. Sometimes it is very slow. MB51 with 1 Material and 1 Month as selection runs into timeout. But i faced the most significant (or strange) problem using SE16 with table bseg. If i use Company code, one item number and year as a selection, it is very fast. If i put in 2 items numbers instead of one, it takes 15 minutes to show the result. This happens everytime i try it.
For me it looks like the system is doing a sequential read instead of using the proper index. This "wrong index" behavior could be the source of many of our performance problems.
Does anybody have a suggestion for me, how to fix this problem?
Thanks in advance
Hans-Peter

> We have SAP ERP 2004 running on a Oracle DB 9.x and we face a strange behavior of our system. Sometimes it is very slow. MB51 with 1 Material and 1 Month as selection runs into timeout. But i faced the most significant (or strange) problem using SE16 with table bseg. If i use Company code, one item number and year as a selection, it is very fast. If i put in 2 items numbers instead of one, it takes 15 minutes to show the result. This happens everytime i try it.
>
> For me it looks like the system is doing a sequential read instead of using the proper index. This "wrong index" behavior could be the source of many of our performance problems.
As mentioned above you can active trace with ST05 to monitor the problematic SQL request. With the explain function, you will see the estimated cost of the request and the used index.
An other way is during the execution of the request --> ST04 -> performance -> Wait event analysis -> Session monitor
If you use the IN option, your request could be very expensive. And in many cases, the reads can only performed with sequential access.
For an overlook of possible indexes for a table, you can use the DB05. To interpret the results : an index is representative when you have numerous distinct values for a few 'rows per generic keys'
Hope this will help you

How can I delete all delta request and init from InfoCube?

Hi,
We are working with an extractor that support deltas, but we are presenting problems with it, some changes in the data are not displayed. For this reason we are thinking change this type of processing and make a full load (with the full updating the changes are shown).
For this reason we need to delete all requests of delta and its init. But in manage option of the infocube we cant see the init and the first deltas.
If I delete the initialization information at info package (menu option scheduler-> initialization). With this only we will delete the Initialization. I need to delete the data in the infocube.
I would appreciate your help.
Regards,
Victoria

Hi Victoria,
You can either display all the requests in the manage tab and delete from there. Or you can use the Automatic Request Deletion option in the Data Target tab of the InfoPackage. See here for details:
http://help.sap.com/saphelp_nw04/helpdata/en/80/1a65a8e07211d2acb80000e829fbfe/content.htm
Hope this helps...

Generic Delta with numeric pointer (Without safety interval and no field)

Hi
We have problems with Generic Delta extraction. Our previous Dev has created the data source with numeric pointer as the data source without any safety interval and without any field for numeric pointer selection even we have the date field (creation and change dates in view)....
He created the generic delta with numeric pointer and Additive delta selection on top of view (EKKO,EKPO and EKKN). So we are missing lot of records. Now I need to fix this asap, I have done generic delta with timestamp and cal day with change/creation date.
Now in order to fix our delta loads should I use the cal day as the delta pointer with change or creation date already available or is it ok to use numeric pointer with additive delta and safety lower limit as 10 or 20 with upper limit blank?
Also Should I use any field in the field nm section or is it ok to leave it blank ? Please advice...
Note: I checked the missing delta records in ECC and the change timing is in the afternoon and our load time is only night...We also have several other data sources with same settings (numeric with no safety and no field) but it is not giving any issues.
Thanks
Edited by: ganesh uttitti on Jan 26, 2011 10:33 PM

Hi Ganesh ,
I'm a little confuse,Why are you not use LO Delata for it?

Print a JTable with several Header and Footers

Hi everybody,
my name is Lothar and I come from Germany. My english is not very well, but I hope you understand me an my problem.
I want to print a JTable, but I want to print a header with several headers and footers.
For example:
h3. Header
h5. 1. Subtitle
h5. 2. Subtitle
Table
h5. 3. Subtitle
h5. Footer
But, I do not know how I can do that. Can anybody tell me, how I can solve my problem. Please, explain for a newbie because I have learned Java since two months ;)
Here the code:
import java.awt.*;
import java.awt.event.*;
import java.text.*;
import java.util.Date;
import javax.swing.*;
public class Beispiel extends JFrame implements ActionListener {
    private JTable table;
    public static void main(String[] args) {
        Beispiel tl = new Beispiel();
        tl.setVisible(true);
        tl.pack();
    public Beispiel() {
        setLayout(new BorderLayout());
        // DruckButton
        JButton print = new JButton("Print");
        add(print, BorderLayout.SOUTH);
        print.addActionListener(this);
        // Tabelle
        add(new JScrollPane(createTable()), BorderLayout.CENTER);
        // schließt das Frame
        setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
    public JTable createTable() {
        // titel
        String[] title = new String[] { "Datum", "Von", "Bis",
                "Dauerinsgesamt", "Bemerkung" };
        // daten
        String[][] data = new String[][] { { "", "", "", "", "" },
        table = new JTable(data, title);
        table.setAutoResizeMode(JTable.AUTO_RESIZE_OFF);
        return table;
    public void actionPerformed(ActionEvent e1) {
        MessageFormat header = new MessageFormat("Header");
        MessageFormat footer = new MessageFormat("Footer");
        try {
            table.print(JTable.PrintMode.FIT_WIDTH, header, footer);
        } catch (Exception e2) {
            System.err.format("Cannot print %s%n", e2.getMessage());
}

Nobody?
Can nobody solve my problem?

Problem when syncing with MobileMe

I am using iPhone 3G, software 2.1. I use GMail for email (no problems) but my contacts, and only my contacts, sync through MobileMe.
The problem is that with MobileMe active, my Contact list, "Mail, Contacts and Calendars" settings and several other minor features simply do not work - they open, pause for a few seconds, then crash. The Mail application also hangs and crashes every other time I open it.
My local Apple Store restored 2.1, after which my Contact list and Email worked perfectly until I re-activated my MobileMe syncing, after which the problems resumed.
As the problems occurred only after MobileMe syncing is turned on, I assume this is the cause of the problem, but because "Mail, Contacts..." settings crashes every time I open it I cannot disable MobileMe syncing.
Any suggestions please? All help gratefully received...

This was resolved by completely removing the MobileMe account from the iPhone, rebooting it and adding the account again.

I am feeling so ripped off right now. I have wanted a Mac for years and believed the hype about it's stability and I have had more trouble with this Imac 2011 than I have ever had with a pc. It locks up with several software products from APP store.

I am feeling so ripped off right now. I have wanted a Mac for years and believed the hype about it's stability and I have had more trouble with this Imac 2011 than I have ever had with a pc. It locks up with several software products from APP store. I have already had to have a technician to look at it and really couldn't figure out what the deal was. I was told that the APP store software should give me no problems but the truth is that it locks up on the software. This machine is only 4 weeks old and I am using 37 g on a 1 T hard drive. There is no reason for it to be locking up. Also, when I try to use the help program, it always tells me that I am not connected to the internet even though I have used both the mail program and the browser with no problem just before that. I successfully used the help program on my pc lots of times. I did not need a $2000. plus machine to just get email. I just wanted to unload on somebody that might understand my pain and after checking out this site...I think there is a few of you out there.

I was told that the APP store software should give me no problems but the truth is that it locks up on the software.
The apps downloaded from the Mac App Store are written by third party developers, not Apple. If you have problems with those apps you need to visit the support area for their websites. Launch the App Store, locate the app name. You should see a support link.
when I try to use the help program, it always tells me that I am not connected to the internet even though I have used both the mail program and the browser with no problem just before that
Go to ~/Library/Preferences. Move the com.apple.helpviewer.plist file from the Preferences folder to the Trash. Restart your Mac, try the Help menu.
If you need help finding that file, hold down the Finder icon in the Dock then click: New Finder Window. From the menu bar top of your screen click: Go > Go to Folder. Type this in exactly as you see it here: ~/Library/Preferences/com.apple.helpviewer.plist That will take you right to that file.
(.plist) files stores information about a particular app or in this case, the Help viewer. Often times deleting the .plist file resolves the issue.
It's fine to "unload"... we understand that you expect your iMac to be stable but there are times when things go awry. That's why we have these forums so that you can you get help.
You may want to read up on how to repair the disk if necessary or reintsall Lion > OS X Lion: About Lion Recovery
Apple - Find Out How - Mac Basics
How to "switch" from PC to Mac > Apple - Support - Switch 101
I'm sorry you feel, "ripped off", but you are using the world's most advanced operating system and it may take some time to adjust to a new OS. http://developer.apple.com/technologies/mac/

I have tried VERY unsuccessfully to install iphoto 9.2.3 update...it says it has successfully updated - then on opening says: iPhoto cannot be opened because of a problem. Check with the developer to make sure iPhoto works with this version of Mac OS X.

I have tried VERY unsuccessfully to install the new iphoto 9.2.3 update.
I have installed it several times both from the appstore and from Apple Support downloads...it says it has 'successfully updated' - then on opening iphoto, a dialogue box pops up and says:
iPhoto cannot be opened because of a problem.
Check with the developer to make sure iPhoto works with this version of Mac OS X. You may need to reinstall the application. Be sure to install any available updates for the application and Mac OS X.
Click Report to see more detailed information and send a report to Apple.
Insane...I have all my updates including Lion 10.7.3 why does APPLE KEEP SENDING BETAS AS A REAL PRODUCT?
Does anyone know how to copy over a backup from a twinned drive Backup? What files etc.
Thanks tons...

Thanks Terence,
I did get it working finally...and your last advice was what I needed.
I am embarassed that I was an early adopter...SHOULD HAVE KNOWN BETTER and read the problems before creating some for myself.
This was an excercise in frustration, because of the obtuse division between the appstore and Apple Support downloads... it was a bit of a circuitous route...strange that with all the security reciepts and tracking that Apple goes to to prevent piracy... which Steve by his own admission used to build Apple...
Why aren't the server scripts smart enough to say…”HEY DUMMY you can't use this download because you purchased the last iPhoto upgrade from the appstore...and… DON'T WASTE YOUR TIME and precious data BUDGET downloading this gargantuan file which will eat 20% of your expensive 5Gb monthly data allotment!!!…and NOT WORK…only pretend to…and then foul your system….kill your productivity and turn your hair whiter…even worse than LION did.
I am just so antagonized by the inept scripts in recent installations that don't do a diagnostic before allowing installation that is going to corrupt things...I had less effort and frustration when I ran my ATARI with a MAC emulator...rarely lost any productivity to nonsense.
I AM TIRED OF BETAs dressed as products...designed and rushed out for Apple toys that once were tools of the creative trade...COREL...may still have a chance at a comeback if Apple keeps pumping out toys instead of the venerable tools we once adored as income enhancers.

Problem in Safari with pull-down menus

My current version of Safari, Version 7.0.3 (9537.75.14), is the buggiest software I have ever had from any Apple--bar none. The problem is dealing with pull-down menus.
The first such problem is in dealing with pull-down menus on websites.   Some of these menus are quite long.   On one particular menu the choice that I routinely need is way down near the bottom.   Routinely Safari stops scrolling before I can get that far down the pull-down menu.
And, always, when Safari stops scrolling on a pull-down menu on a webpage, it refuses to allow me to scroll down again.   To get the webpage's pull-down menu to operate then, I have to re-load the webpage.   That is a big problem for one website that I MUST use. This website has three pull-down menus on one webpage. Because Safari always locks up on the first menu, this crucial website is unusable in Safari. I have to use Firefox for this absolutely essential website.
And Safari has trouble with one of its own pull-down menus. This is the PDF menu in the printer window. Not always, but too often, when I pull down that menu to print to PDF, Safari crashes.   I have to wait for a dialog box to come up and click "send report to Apple" in order to get Safari to reopen.   I don't know how many such reports I have sent to Apple. I get the feeling that Apple is not listening.
Does anyone have any suggestions for these problems? TIA

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
For this step, the title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen.
In the top right corner of the Console window, there's a search box labeled Filter. Initially the words "String Matching" are shown in that box. Enter the name of the crashed application or process. For example, if iTunes crashed, you would enter "iTunes" (without the quotes.)
Each message in the log begins with the date and time when it was entered. Select the messages from the time of the last crash, if any. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
☞ The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
☞ Some private information, such as your name, may appear in the log. Anonymize before posting.
Step 2
In the Console window, select
DIAGNOSTIC AND USAGE INFORMATION ▹ User Diagnostic Reports
(not Diagnostic and Usage Messages) from the log list on the left. There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of crash reports. The name of each report starts with the name of the process, and ends with ".crash". Select the most recent report related to the process in question. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot.
I know the report is long, maybe several hundred lines. Please post all of it anyway.
☞ If you don't see any reports listed, but you know there was a crash, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
☞ Please don’t post other kinds of diagnostic report—they're very long and rarely helpful.

Problem in connecting with Oracle

hi everybody
I have a problem in connecting with Oracle express 10g. I got an error that doesn't allow me to connect. hope anyone can help me and solve this problem
--------------------Configuration: test - JDK version 1.6.0_20 <Default> - <Default>--------------------
java.sql.SQLException: Io exception: The Network Adapter could not establish the connection
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:112)
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:146)
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:255)
at oracle.jdbc.driver.T4CConnection.logon(T4CConnection.java:387)
at oracle.jdbc.driver.PhysicalConnection.<init>(PhysicalConnection.java:414)
at oracle.jdbc.driver.T4CConnection.<init>(T4CConnection.java:165)
at oracle.jdbc.driver.T4CDriverExtension.getConnection(T4CDriverExtension.java:35)
at oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:801)
at java.sql.DriverManager.getConnection(DriverManager.java:582)
at java.sql.DriverManager.getConnection(DriverManager.java:185)
at DB.dbConnect(test.java:36)
at test.main(test.java:18)
this is the code that I'm following
import java.io.*; import java.sql.*; public class test2 { public static void main(String[] args) { try { Connection con=null; Class.forName("oracle.jdbc.driver.OracleDriver"); con=DriverManager.getConnection( "jdbc:oracle:thin:@PLANET:1521:ORCL", "scott", "tiger"); Statement s=con.createStatement(); s.execute("INSERT INTO BOOKS VALUES('A Tale of Two Cities','William Shakespeare',4567891231,'05-JAN-1962')"); s.close(); con.close(); } catch(Exception e){e.printStackTrace();} } }
Edited by: Vantasia on Nov 12, 2010 10:18 AM

1. Is the connection url correct?
"jdbc:oracle:thin:@PLANET:1521:ORCL" is fine.
2. Is the TNS listener started?
c:\oracle\product\ora10\bin> lsnrctl status
3. Is a firewall between client and database server?
Connection url with firewall would be different.
http://download.oracle.com/docs/cd/B28359_01/java.111/b31224/jdbcthin.htm#i1004276

Problem in tilelist with dataprovider.

I have a problem in tilelist. with the dataprovider a get the
message error
ArgumentError: Error #2025: The supplied DisplayObject must
be a child of the caller.
at flash.display::DisplayObjectContainer/removeChild()
if i delete the images from the last added to the first one i
have no prob but if i want to delete from the middle i get the
message error th sode that i use is
<mx:TileList id="tileList"
dataProvider="{imgData}"
columnCount="4"
columnWidth="222"
rowCount="2"
rowHeight="194"
themeColor="haloSilver"
verticalScrollPolicy="on"
x="0" y="415" width="100%">
<mx:itemRenderer>
<mx:Component>
<mx:VBox horizontalAlign="center"
verticalAlign="middle" width="222" height="194"
verticalScrollPolicy="off" horizontalScrollPolicy="off" >
<mx:Image id="img" width="165" height="126"
maintainAspectRatio="true" source="{data.asset}" />
<mx:Label id="txt" text="{data.title}"/>
<mx:Button id="del" label="Delete"
click="outerDocument.deleteSnapShot(event)"/>
</mx:VBox>
</mx:Component>
</mx:itemRenderer>
</mx:TileList>
the function to add the image is :
public function addImgToTile(bm:Bitmap):void{
var bm1:BitmapData = Bitmap(bm1_source.content).bitmapData;
var bitmap:Bitmap = new Bitmap(bm1);
var vo:MyVOBm = new
MyVOBm(bitmap,formatTime(inStream.time));
imgData.addItem(vo);
And the function to delete the image is:
public function deleteSnapShot(ev:Event):void{
imgData.removeItemAt(tileList.selectedIndex);
tx for your help

tx Amy for your help here i give you the code that generate
the image from streaming video
<mx:Canvas id="videoHBox" horizontalScrollPolicy="off"
verticalScrollPolicy="off" backgroundColor="#000000" width="456"
height="284" y="37">
</mx:Canvas>
<mx:Button x="464" y="188" label="In" width="48"
id="btnIn" click="addStart(inStream.time);" enabled="true"
visible="true" useHandCursor="true" buttonMode="true" toolTip="Add
Start Image (shotcut Home)"/>
<mx:Button id="Btn_add_action" x="464" y="221" label="Add
Screenshot" click="addImgToTile(bm1)" useHandCursor="true"
buttonMode="true" toolTip="Add Clip (shotcut insert)"/>
<mx:TileList id="tileList"
dataProvider="{imgData}"
columnCount="4"
columnWidth="222"
rowCount="2"
rowHeight="194"
themeColor="haloSilver"
verticalScrollPolicy="on"
x="0" y="415" width="100%">
<mx:itemRenderer>
<mx:Component>
<mx:VBox horizontalAlign="center"
verticalAlign="middle" width="222" height="194"
verticalScrollPolicy="off" horizontalScrollPolicy="off" >
<mx:Image id="img" width="165" height="126"
maintainAspectRatio="true" source="{data.asset}" />
<mx:Label id="txt" text="{data.title}"/>
<mx:Button id="del" label="Delete"
click="outerDocument.deleteSnapShot(event)"/>
</mx:VBox>
</mx:Component>
</mx:itemRenderer>
</mx:TileList>
variable:
private var videoHolder:UIComponent = new UIComponent();
[Bindable] public var imgData:ArrayCollection = new
ArrayCollection();
init :
nc = new NetConnection();
nc.addEventListener(NetStatusEvent.NET_STATUS, netStatus);
nc.addEventListener(SecurityErrorEvent.SECURITY_ERROR,
netSecurityError);
nc.connect(Srv_Name);
videoHolder.setActualSize(Playing_Video_width,
Playing_Video_height);
Playing_Video = new Video(Playing_Video_width,
Playing_Video_height);
videoHolder.addChild(Playing_Video);
Playing_Video.x = 0;
Playing_Video.y = 0;
videoHBox.width = Playing_Video.width;
videoHBox.height = Playing_Video.height;
videoHBox.addChild(videoHolder);
functions:
public function addStart(timecode:Number):void{
var bm:Bitmap = copyBitmap(videoHBox as
UIComponent,timecode,"start");
bm1 = bm;
img_start_time.text = formatTime(timecode);
start_time = timecode;
public function addImgToTile(bm:Bitmap):void{
var bm1:BitmapData = Bitmap(bm1_source.content).bitmapData;
var bitmap:Bitmap = new Bitmap(bm1);
var vo:MyVOBm = new
MyVOBm(bitmap,formatTime(inStream.time));
imgData.addItem(vo);
private function
copyBitmap(source:UIComponent,timecode:Number,origin:String=''):Bitmap
try{
var bmd:BitmapData = new BitmapData( source.width,
source.height );
bmd.draw(source);
corectImg = false;
catch (err:Error){
this.setFocus();
inStream.seek(timecode);
if (origin == "start") setTimeout(addStart,750,timecode);
return new Bitmap(bmd);
public function deleteSnapShot(ev:Event):void{
imgData.list.removeItemAt(tileList.selectedIndex);
and the MyVOBm class is :
package components
import flash.display.Bitmap;
[Bindable]
public class MyVOBm
private var _asset:Bitmap;
private var _title:String;
public function MyVOBm(asset:Bitmap, title:String)
this.title=title;
this.asset=asset;
public function set title(title:String):void{
_title=title;
public function get title():String{
return _title;
public function set asset(asset:Bitmap):void{
_asset=asset;
public function get asset():Bitmap{
return _asset;

Some images do not display in browser, iPad Air 2. When I load a page with several jpgs (one 1920x720, then 8-10 800x800px), only the first few are shown. Behaviour is similar for Safari and Chrome. Website issue or iPad?

I have just bought an iPad, partly to check that my websites work OK on mobile devices. When I load a page with several jpgs (e.g. one 1920x720, then 8-10 800x800px), only the first few are shown. If I remove the large one, that sometimes fixes the problem. Behaviour is similar for Safari and Chrome. Is this a website issue or iPad?

Sorry, I didn't make myself clear. I'm using a new Wordpress theme that is meant to be responsive. The large image is for a header, than you scroll down to see the rest, one by one. Some one the pages work OK on my iPad, typically the old ones where the maximum image size was 500 x 500. It's the new pages and those I've updated that are causing the problem. On the iPad the large image loads, then a couple of the small ones become visible as I scroll down, but then darkness (rather like my knowledge level).
Being new to IOS and iPads, I'm trying to work out whether I should be looking here, or amongst the Wordpress stuff for a solution.
Here's the website with its new theme: http://www.new-zealand-pictures.com/

Configure a project with several toolkits ?

Hello everybody,
Here are my problem and my question.
In my case, I use a RCP application so I configured my project with a RCP toolkit. But during my automated tests with Jubula, there are some elements whose aren't recognized by Jubula.
In fact, these elements aren't RCP components but I recognized HTML components (hypertext links), AWT/SWING components (tree), kind of array and maybe others... And that, I didn't know and it was a surprise because for me, a RCP application only uses RCP components.
I understood the control on the application depends on the choosen toolkit. So with my setup, I can only interact with the RCP elements.
So one day, could we configure a project with several toolkits ?
Thanks for your time.

Hi Alex,
I tested my program and there isn't modification.
But I got another question.
When we use replaceText function (and maybe other functions), I saw there is a "default event handler" step included in the Test Result. In the application, there are text fields whose use a tabulation, it's automatic when the user enters the good number of characters. And I can't change that because it's required by the company (time saving for the testers).
I have this error detail in the properties of Replace Text function :
Type : Action Error
Error Description : Timeout received before confirming the posted event
Is there a way to desactivate this step ?
Best Regards,
Romain.

0CRM_SALES_ACT_1 - Problems on Delta with several Inits

Similar Messages

Maybe you are looking for