0CRM_SALES_ACT_1 takes a long time to extract data from CRM system

Hi gurus,
I am using the datasource 0CRM_SALES_ACT_1 to extract activities data from CRM side. However, it is taking too long time to get any information there.
I applied the SAP NOTE 829397 (Activity extraction takes a long time: 0crm_sales_act_1) but it did not solve my problem.
Does anybody knows something about that?
Thanks in advance,
Silvio Messias.

Hi Silvio,
I've experienced a similar problem with this extractor. I attempted to Initialize Delta with Data Transfer to no avail. The job ran for 12+ hours and stayed in "yellow" status (0 records extracted). The following steps worked for me:
1. Initialize Delta without Data Transfer
2. Run Delta Update
3. Run Full Update and Indicate Request as Repair Request
Worked like a champ, data load finished in less than 2 minutes.
Hopefully this will help.
Regards.
Jason

Similar Messages

0CRM_SALES_ACT_1 takes a long time to extract data from CRM5.0 system

Hi Team,
We are having CRM 5.0 and BW 701.
We are extracting data from CRM to BW using extractor 0CRM_SALES_ACT_1 in CRM. But it is taking long time.
Please suggest what can we do to improve the performance.

Hi,
its depend on the data volume its take a time along with CRM server.
during your load time if crm server was busy then it may delay your load.
Need to trigger your load where less burden on servers(CRM/BW).
While triggering before please check available application servers to process your request at SM50.
if this full load and have huge data then please split your loads with selections and load them into bw.
you can increase processing records count and info pack wait time at info pack level.
go to info pack--> menu scheduler--> wait time and datas setting for data transfer.
during your load time ask basis team to keep on eye at T code - SM58(CRM).
Thanks

Long time to load data from PSA to DSO -Sequential read RSBKDATA_V

Hi ,
It is taking long time to load data from PSA to DSO. It is doing Sequential read on RSBKDATA_V and table contents no data .
we are at - SAPKW70105. It started since yesterday . There is no changes in system parameters.
Please advice.
Thanks
Nilesh

Hi Nilesh,
I guess the following SAP Note will help you in this situation.
[1476842 - Performance: read RSBKDATA only when needed|https://websmp107.sap-ag.de/sap/support/notes/1476842]
Just note that the reference to Support Packages is wrong. It is also included in SAP_BW 701 06.

Error while extracting data from CRM

Dear all,
I have used some standard and generic datasources to extract data from CRM. These were working fine for more than a year and are scheduled in Process chains. For the past few days I am getting Caller 09 error as shown below, only for the generic datasources. I have checked the connection,replicated the datasources and activated them, reinitialized and have tried all the solutions that were posted earlier, but still the process chain fails. When I execute the process chain for generic datasources manually, it is working fine.
When I tried in RSA3 for both standard and generic datasources in CRM with update mode D, I get a message 'Error occured during the extraction',
Kindly suggest what can be the problem.
Error message from the source system
Diagnosis
An error occurred in the source system.
System Response
Caller 09 contains an error message.
Further analysis:
The error occurred in Extractor .
Refer to the error message.
Procedure
How you remove the error depends on the error message.
Note
If the source system is a Client Workstation, then it is possible that the file that you wanted to load was being edited at the time of the data request. Make sure that the file is in the specified directory, that it is not being processed at the moment, and restart the request.
Thanks all in advance.
Regards
Adhira Anand

Hi Meyappan,
I have checked SM37, SM21 and ST22. There are no errors.
in SM37 the below log is displayed.
Job started
Step 001 started (program SBIE0001, variant &0000000005420, user ID ALEREMOTE)
Asynchronous transmission of info IDoc 2 in task 0001 (0 parallel tasks)
DATASOURCE = ZCRM_SRV_DEFECT
RLOGSYS    = CLNT645BIP
REQUNR     = REQU_4JHQ8HH6KA40JHC1TYLYIV2W2
UPDMODE    = D
LANGUAGES = *
         Current Values for Selected Profile Parameters               *
abap/heap_area_nondia......... 2000000000                              *
abap/heap_area_total.......... 2000000000                              *
abap/heaplimit................ 40000000                                *
zcsa/installed_languages...... DE                                      *
zcsa/system_language.......... E                                       *
ztta/max_memreq_MB............ 2047                                    *
ztta/roll_area................ 6500000                                 *
ztta/roll_extension........... 2000000000                              *
1 LUWs confirmed and 1 LUWs to be deleted with function module RSC2_QOUT_CONFIRM_DATA
IDOC: Info IDoc 2, IDoc No. 101415, Duration 00:00:00
IDoc: Start = 13.10.2010 22:51:39, End = 13.10.2010 22:51:39
Synchronized transmission of info IDoc 3 (0 parallel tasks)
IDOC: Info IDoc 3, IDoc No. 101416, Duration 00:00:00
IDoc: Start = 13.10.2010 22:51:42, End = 13.10.2010 22:51:42
Job finished

BO DI for extracting data from legacy system to SAP BW 7.0

Hi,
Has anyone worked on scenario where BO Data Integrator is being used as ETL tool for extracting data from legacy systems to SAP BW 7.0 ?
Please share your experience on such a landscpae or related documents any of you had come across.
Regards,
Pritesh

There are couple of them - Lawson ERP, Kalido, AS/400. ECC 5.0 might be there as well.
Regards,
Pritesh.
Edited by: pritesh prakash on Jun 14, 2010 2:00 PM

Error during extraction data from APO system

HI Gurus,
We are extracting data from APO system at regular intervals. As poart of business requirement, we enhanced the data existing data source in APO dev system and replicated the same in BW dev system and activated the Tx structure and Tx rules.
When we checked it is working fine in dev environment.
Now we moved the same in Quality system, and we tried to extract data, it throws error " error in data selection in source system".
We tried to check in RSA3 in APO and found that the extract program still refers to the old extract structre and gives dump " Extract structure unknown".
Could anybody throw some light on this issue.
Tnx in advance.
Guru

Hi,
Have u collected all the objects in R3,like the Table/View , DS,Extract Structure.
And
Has replication been done in BI side for the same.
Rgds
SVU
Edited by: svu123 on Sep 24, 2009 7:50 AM

Snow Leopard 10.6.2 takes a long time to run 'X11.app' (with system log)

Hello everyone, English is not my mother tongue so may not be exactly correct, sorry about that.
Background:
I have a MacBook White (13-inch, Mid 2009) that isn't unibody, and was running Leopard 10.5.
I did a clean installation and now Snow Leopard 10.6.2, with iLife, iWork, and many many apps.
I am the only one who will use the Mac and my user account is as the 'admin'.
I previously had a problem concerning X11 too:
http://discussions.apple.com/thread.jspa?threadID=2343732
*What I've done:*
(1) rename my HD to 'Michaels_Home' under 'Get Info' from Finder (I can't rename in Disk Utility though)
(2) press return (enter)
(3) change my home folder path to the '/Volumes/Michaels_Home/Users/Michael' (http://eshop.macsales.com/Reviews/Framework.cfm?page=Tips/relocate3/relocate3.ht ml)
(4) restart
(5) log in and open X11
(6) problem solved!!
==========
*BUT NOW* I have a problem after:
(1) log in as the root user, and use command +ditto -V xyz xyz+ to copy my home folder from '/Volumes/Michaels_Home/Users/Michael' to '/Users>Michael'
(2) change my home folder path to the '/Users/Michael' (http://eshop.macsales.com/Reviews/Framework.cfm?page=Tips/relocate3/relocate3.ht ml)
(3) use the Mac OS X Snow Leopard USD$29 disc to boot my Mac up
(4) delete the 'Michaels_Home' partition (I had 3 partitions: (1) Macintosh HD (2) Michaels_Home (3) Windows XP Professional)
(5) resize the 'Macintosh HD' partition
(6) boot from Macintosh HD
(7) find that there's a problem about X11
_The problem:_
it takes a *long time* for X11 to start.
When I try to open the 'X11.app', the X11 icon begins jumping on the Dock, but nothing happens.
Jumping and jumping... finally, it doesn't jump any more, with just the X11 icon on the dock.
What's more, there is no white dot under the icon, which means the app isn't running at the moment.
I right-clicked the icon, it shows me 'application not responding'.
So, I open the *Activity Monitor*, and I can see there are 3 apps related to X11 are running:
(1) X11
(2) X11.bin
(3) xauth
*At the moment now, if you would wait for about 1.5 min., X11 will open.*
Please see below for the system log (from 'FREEZING' to 'WORKING')
==========
Mar 1 00:42:10 n219073058253 [0x0-0x22022].org.x.X11[327]: X11.app: main(): argc=2
Mar 1 00:42:10 n219073058253 [0x0-0x22022].org.x.X11[327]: argv[0] = /Applications/Utilities/X11.app/Contents/MacOS/X11.bin
Mar 1 00:42:10 n219073058253 [0x0-0x22022].org.x.X11[327]: argv[1] = -psn0139298
Mar 1 00:42:10 n219073058253 [0x0-0x22022].org.x.X11[327]: Waiting for startup parameters via Mach IPC.
Mar 1 00:42:10 n219073058253 org.x.startx[335]: font_cache: Scanning user font directories to generate X11 font caches
Mar 1 00:42:10 n219073058253 org.x.startx[335]: font_cache: Updating FC cache
Mar 1 00:42:10 n219073058253 org.x.privileged_startx[344]: font_cache: Scanning system font directories to generate X11 font caches
Mar 1 00:42:10 n219073058253 defaults[370]: \nThe domain/default pair of (org.x.X11, dpi) does not exist
Mar 1 00:42:12 n219073058253 org.x.privileged_startx[344]: font_cache: Updating FC cache
Mar 1 00:42:13 n219073058253 org.x.startx[335]: font_cache: Done
Mar 1 00:42:14 n219073058253 org.x.privileged_startx[344]: font_cache: Done
Mar 1 00:42:31 n219073058253 org.x.startx[335]: xauth: timeout in locking authority file /Users/Michael/.serverauth.335
Mar 1 00:42:51 n219073058253 org.x.startx[335]: xauth: timeout in locking authority file /Users/Michael/.Xauthority
Mar 1 00:43:31: --- last message repeated 1 time ---
Mar 1 00:43:31 n219073058253 org.x.startx[335]: xauth: timeout in locking authority file /Users/Michael/.Xauthority
Mar 1 00:43:51: --- last message repeated 1 time ---
Mar 1 00:43:51 n219073058253 [0x0-0x22022].org.x.X11[327]: X11.app: Listening on socket for fd handoff: (4) /var/tmp/tmp.0.9OYerf
Mar 1 00:43:51 n219073058253 [0x0-0x22022].org.x.X11[327]: X11.app: Thread created for handoff. Returning success to tell caller to connect and push the fd.
Mar 1 00:43:51 n219073058253 [0x0-0x22022].org.x.X11[327]: X11.app: Received new $DISPLAY fd: 6 ... sleeping to allow xinitrc to catchup.
Mar 1 00:43:51 n219073058253 [0x0-0x22022].org.x.X11[327]: X11.app: dostart_x11server(): argc=6
Mar 1 00:43:51 n219073058253 [0x0-0x22022].org.x.X11[327]: argv[0] = /usr/X11/bin/X
Mar 1 00:43:51 n219073058253 [0x0-0x22022].org.x.X11[327]: argv[1] =
Mar 1 00:43:51 n219073058253 [0x0-0x22022].org.x.X11[327]: argv[2] = -nolisten
Mar 1 00:43:51 n219073058253 [0x0-0x22022].org.x.X11[327]: argv[3] = tcp
Mar 1 00:43:51 n219073058253 [0x0-0x22022].org.x.X11[327]: argv[4] = -auth
Mar 1 00:43:51 n219073058253 [0x0-0x22022].org.x.X11[327]: argv[5] = /Users/Michael/.serverauth.335
Mar 1 00:43:51 n219073058253 org.x.startx[335]: Xquartz: Handoff connection established (try 1 of 5) on fd 6, "/var/tmp/tmp.0.9OYerf". Sending message.
Mar 1 00:43:51 n219073058253 org.x.startx[335]: Xquartz: Message sent. Closing handoff fd.
Mar 1 00:43:51 n219073058253 [0x0-0x22022].org.x.X11[327]: Xquartz starting:
Mar 1 00:43:51 n219073058253 [0x0-0x22022].org.x.X11[327]: X.Org X Server 1.4.2-apple45
Mar 1 00:43:51 n219073058253 [0x0-0x22022].org.x.X11[327]: Build Date: 20090705
Mar 1 00:43:51 n219073058253 [0x0-0x22022].org.x.X11[327]: (EE) XKB: Couldn't open rules file /usr/X11/share/X11/xkb/rules/base
Mar 1 00:43:54: --- last message repeated 1 time ---
Mar 1 00:43:54 n219073058253 [0x0-0x22022].org.x.X11[327]: X11.app Handing off fd to server thread via DarwinListenOnOpenFD(6)
Mar 1 00:43:54 n219073058253 [0x0-0x22022].org.x.X11[327]: DarwinListenOnOpenFD: 6
Mar 1 00:43:54 n219073058253 [0x0-0x22022].org.x.X11[327]: Calling ListenOnOpenFD() for new fd: 6
Mar 1 00:43:54 n219073058253 [0x0-0x22022].org.x.X11[327]: X11.app: Launching /usr/X11/bin/xterm:
Mar 1 00:43:54 n219073058253 [0x0-0x22022].org.x.X11[327]: argv[0] = /bin/sh
Mar 1 00:43:54 n219073058253 [0x0-0x22022].org.x.X11[327]: argv[1] = -c
Mar 1 00:43:54 n219073058253 [0x0-0x22022].org.x.X11[327]: argv[2] = /usr/X11/bin/xterm
==========
I quit the X11:
==========
Mar 1 00:45:45 n219073058253 [0x0-0x22022].org.x.X11[327]: Quitting Xquartz...
Mar 1 00:45:45 n219073058253 org.x.startx[335]: /usr/X11/bin/xinit: connection to X server lost.
Mar 1 00:45:45 n219073058253 org.x.startx[335]: waiting for X server to shut down
==========
AFTER quitting X11, I can see something related X11 is stilling running:
==========
Mar 1 00:46:06 n219073058253 org.x.startx[335]: xauth: timeout in locking authority file /Users/Michael/.Xauthority
==========
So what actually causes this problem?
Thanks in advance!

It turns out that there's something wrong about permissions.
Here's the fix:
(1) log in as the +root user+
(2) type +chown -R Michael:staff ~Michael+
(3) log out the +root user+
(4) log in your account
(5) done!
Hope this thread will help those who encounter the same problem as me!

How often in the real time projects extract data from flat files n process

I am going thru teh BODS data integrator, and trying to understand the demand of ETL services extract data from a flat file, is that really impt in teh real time jobs.
Thank you very much for the helpful info.

Hi,
As per the inputs given by you guys i started loading data from flat file.
I try to load 28 files from i which i was able to load 24 files succesfully.For the other 4 i got this error messages
1) Error 'Enter period in the format __.YYYY...' at conversion exit CONVERSION_EXIT_PERI6_INPUT (field CALMONTH record 1, value DUMYTRA)
Message no. RSDS012
2) a) Error 'The argument '1,008.00' cannot be interpreted as anumber' on assignment field QUANT_B record 11714 value 1,008.00
Message no. RSDS013
b) Error 'The argument '1,110.00' cannot be interpreted as anumber' on assignment field QUANT_B record 15374 value 1,110.00
Message no. RSDS013
3) a) Error 'The argument '1,140.00' cannot be interpreted as anumber' on assignment field QUANT_B record 1647 value 1,140.00
Message no. RSDS013
b) Error 'The argument '2,028.00' cannot be interpreted as anumber' on assignment field QUANT_B record 4625 value 2,028.00
Message no. RSDS013
4) Error 'The argument '1,151.00' cannot be interpreted as anumber' on assignment field QUANT_B record 7808 value 1,151.00
Message no. RSDS013
I'am unable to trace out what is the error exactly.
I checked this values in files they are perfect.
can anybody please guide me on this issue.
With Regards,
Pradeep.B

Error occured in the data selection while extract data from Source system

Hello Friends
i am facing Problem while extracting data to Biw System from SAP R/3 system
The error mesage is 'Error occured in the data selection '
i.e. Monitoring - Details tab - Extraction - With error

Hi
The delta wil take the Last init selection for loading data in to the BW...
Did u check the IP at the Update tab is it the correct delta only.. or its a full..
better to go to the RSA3 and check the extractor in the Delta mode .. if u give ur delta mode it automatically takes the selction options.. so please try in RSA3..
regards
CK
PS: CHECK THE INIT SELECTIONS TOO or do an init with outdatatransfer and perform the delta...
Message was edited by:
BW Star

How to extract data from CRM with Data Service?

Hi all,
I'll try to explain briefly the main issue; We need to read or extract data from SAP CRM with Data Service tool, then we'll show the data with webi, but now I would like to know if there are some standard tool as a rapid mart (i mean that it doesn't exists) but if some one knows how it works and if it's possible, it could be very helpful for us.
BW option doesn't ok because the client needs a lot of queries for a report and the standard tool in our project is Data Service.
Thanks in advance, and ask all u need if it can be a help for answer the question.
Best Regards.
Edited by: Cantabria on Jun 7, 2011 1:14 PM

Hi,
Your very familiar with LO data source even though your getting doubts on it.
LBWE/SM13 belongs to only LO Data sources.
CRM data sources also have delta settings based on data source.
You can search on google about CRM data sources by using data source names.You may get some useful information.
Before using CRM Data sources, CRM functional team need to set proper configurations at CRM system. those also you can easily get form google.
use search term as " CRM - BW Adapter settings".
Like other standard data sources for crm also,
we need to activate from RAS5 and do the modification at RSA6.
test at RSA3 and replicate into BW. Do the rest of the flow at bw system.
Thanks

Extracting data from Legacy system - How do we get the data into a normaliz

Hi All,
Requirement that I have now is to get the data from 6 different tables ORACLE database to BI using DB Connect, where in each of those 6 tables has the transactional data as well - If it is only 2 tables, would have been creating a view and get the data. Each of the 6 tables are linked to one other by the Primary Key and Foreign key relation ship.
If it is from ERP system we would have created a Functional Module.
Please advice me on how to get the data to BI end from those tables in Legacy system.
Thanks in advance.

Anil:
I recommend following Ralph Kimball's EDW data modeling principles.
Have a staging layer of DSO's with data dump from source system. So have 6 different DSO's extracting data from 6 tables from source system independently.
Then have an integeration layer of DSO's depending on requirement. You could combine data from 2 or more DSO's here based on requirement and integrate your data here. Use primary key foreign key relationships here to do look ups or direct loads to do your business logic.
Then have an analytical layer of InfoCubes, MultiProviders, InfoSets as required.
The 3 layered architecture is a standard best practice that i have seen followed in many organizations. You could search for this type of architecture online under EDW (Enterprise Data Warehouse). There should be plenty of information available.
Good Luck.
MP.

Extract datas from CRM - Appliance

Hi experts
Anybody knows if has the standard datasource to extract datas from appliance in CRM ?
Or the tables that I need to read to get all information ther?
Tks,
Cesar Batista

Hi Cesar,
Please check the below link:
http://help.sap.com/saphelp_nw2004s/helpdata/en/af/ed833b2ab3ae0ee10000000a11402f/frameset.htm
Hope it helps!
Regards,
Pavan

Error in Process Chain while extracting data from source system

Hi All,
Dail we are facing problem while retrieving the data from source system for the data source 0TB_AMOUNT1 in the process chain, it is giving error "Function module BANK_TMC_API_SIM_GET does not exist Furnction module". when I repeat the step than it is going fine.
Please let me know why this error is coming for first why it is not coming after repeating the step?
Thanks & Regards,
Murali.

Hi Murali,
Hope you are doing good..
Is it a full or Delta load on a daily basis? Did you check if the FM exists in your system?
Did you try debugging the load in source system and check if the extractor is trying to call FM you mention.
If possible please post the exact error message you are receiving so that we could get an idea whats the error and why you are encountering it.
As of now what i can suggest is, go to RSA2 in source system, give the datasource name and check if the extractor code has FM in it.
Regards,
Anil Pragada.

How to extract data from legacy system to source file

Hi can anyone tell me the procedute to copy data from legacy system to source files....this data needs to be moved to base tables
can any one tell me the procedure and any sample code i,e any example
Thanks & Regards
Krish

You should post your thread to ...:
http://forums.oracle.com/forums/forum.jspa?forumID=183
providing all necessary info......!!!!
Greetings...
Sim

Error while fetching data from CRM system to BW

I am extracting data (BP ID) from CRM system. I have upgraded the BI 7.0 system from patch 12 to patch 14. After upgrading when i execute the infopackage to fetch the data from the CRM system. The request is coming in yellow and is not fetching the data. Can you suggest what could be the solution.. or where can i find some help..
Thanks..
Bhavya

Hi,
1 . Do the Data replication in source system
2. Check the source system connections.
3. Check the Infopackage status and also che the exact error from tcode RSMO.
Regards,
Srini Nookala

0CRM_SALES_ACT_1 takes a long time to extract data from CRM system

Similar Messages

Maybe you are looking for