0CUSTOMER Hierarchy - not same as in vdh2n

Hello,
I have 0CUSTOMER with Text, Attr. and Hierarchy.
Text and Attr. are OK.
0CUSTOMER hierarchy Datasource is 0CUSTOMER_LKLS_HIER.
Upload is also no problem. BUT when I compare the hierarchy structure in Source System with t-code vdh2n is NOT the same(= missing of hierarch nodes).
Or is the hierarchy only visible in BEx?
ANY input is welcome.

Hello,
change run was executed - no changes in the result. Means: 0CUSTOMER hierarchy is <b>NOT</b> same display than in t-code vdh2n.
Any further ideas?

Similar Messages

BP671 object currencies are not same in budget hierarchy

Hi,
We have set object curency in budget profile for budget currency and availablitity control.
Although all the wbs, networks and production orders use the same object currency, we are still getting the error "BP671 object currencies are not same in budget hierarchy"
Any solution / ideas to solve this error ?
Thanks,
Manohar

Thanks for your reply.
But i have already checked all three option in Query designer and executed in Bex Analyzer.
once again i am telling -(first time all posted and without posted node are apperaring but after swapping the axis in analyzer sheet only posted nodes are appearing)
Any other option is require for this please tell.

Webi report on OLAP Bex query - Cost element Hierarchy not working Drill down

Hello,
We have a BO report on Bex query, Not on universe, we have a Hierarchy for Cost Element Group, and we are expecting the Drill down functionality for that in BO report, but it does not.
Webi report on OLAP Bex query - Cost element Hierarchy not working Drill down
Any pointers how to do it please
Thanks
Krishna

Hi,
WebI reports on BEx source don't use same Drill feature as other sources, it's replaced by expland/collapse of hierarchy nodes (documented in WebI user guide in § "24.1 Drill defined"). This means you have to create query which selects all hierarchy sub-tree you plan on exploring later in report, otherwise if no data is available under a node there will be no '+/-' sign to visit this part of tree.
You could try first to select "All members" from hierarchy in QueryPanel and see if behavior in report suits your needs. Then you should restrict hierarchy member selection to what's really needed to avoid performance issues.
Regards,
Loic

Activating and using 0CUSTOMER Hierarchy extraction in R3

Dear Expert,
Could anybody explain me about Activating and using 0CUSTOMER Hierarchy extraction in R3 and then extract to BW systems from R3 in step by step?
Points will be assign granted
Regards
Sanjiv

You can load Hierarchies (sets) from R/3 in the same as other Master Data. Just you need to create Hierarchy DataSource using Tcode BW07. Where you have to give the name of the table and field on which you created Hierarchy iin R/3.
Also there are many standard avilable datasources also for hierarchy for which you can load Hierarchy Directly.
Here are the step by step procedures:
Hi,
If you are using standard infoobject and you want to load r3 hierachy you dont have to configure any additional thing in order to load it in BW.
The Steps are:
1)Activate the hierarcie datasource in R3
2)Replicate it in BW
3)Assign the datasource for an Infosource, and make sure you select the hierarchie datasource.
4)Active the Infosource
5)Create Infopackage
6)Select the desire hierachie in the infopackage(if you dont see it, click on Available Hierarchies from OLTP and select it)
Regards
Asigns point if useful please
http://help.sap.com/saphelp_nw04/helpdata/en/80/1a6729e07211d2acb80000e829fbfe/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/3d/320e3d89195c59e10000000a114084/frameset.htm
Re: Hierarchies

I'm using Iphone 5 .After updating it with the latest software i.e iOS 7.0.6 I'm not able to see the wats app and imsg on my notification until and unless i activate the "Show on Lock Screen" which was not same as in the earlier software version.Help plz

I'm using Iphone 5 .After updating it with the latest software i.e iOS 7.0.6 I'm not able to see the wats app and imsg on my notification center when my phone is locked until and unless i activate the "Show on Lock Screen" under each application. which was not same as in the earlier software version.I dnt want my messages or watsapp msges to be displayed on home screen when locked but should be displayed on the notification center on lock condition.
Please suggest a solution or @Apple please get a software release which can remove this bug .

We aren't Apple, just users like you. Have you tried a reset? Hold down the home button along with the sleep/wake button until the screen goes black and you see the Apple, then let go. (No data loss)

Wireless keyboard mapping is not same as printed on Leopard and MacMini

Hi ...
I bought MacMini and Wireless Keyboard.
when I type, the character that shows are not same like it`s printed
This is what I type+
Keyboard Mapping
~!”#$%&’()0=~
`1234567890-^
QWERTYUIOP`{}
qwertyuiop@[]
ASDFGHJKL+*
Asdfghjkl;:
ZXCVBNM<>?
zxcvbnm,./
If you have a Mac Keyboard, what ever it is, it will show different character as I type above, mostly on the special character.
Can someone help me on this?
Thank you and regads,
Faizal A.-

Hi Tom,
Thanks for identifying the issue.
I am trying to follow that article, here is the result:
/System/Library/CoreServices/KeyboardSetupAssistant.app/Contents/MacOS/KeyboardS etupAssistant ; exit;
2012-02-07 07:22:42.702 KeyboardSetupAssistant[491:507] No unknown keyboard connected - terminating
logout
[Process completed]

Compressor 4 crashes on opening keep getting this warning: The application "Compressor" unexpectedly quit while trying to restore its windows. Do you want to try to restore its windows again? Tried Restoring windows. It crashes again. Tried not = Same r

Compressor 4 crashes on opening keep getting this warning: The application “Compressor” unexpectedly quit while trying to restore its windows. Do you want to try to restore its windows again? Tried Restoring windows. It crashes again. Tried not = Same result. This is the first time I've actually used the app although I purchased it back in April (I think). I had my first longform project completed in FCPX and tried sending it to Compressor 4 and got this result over and over again.

Steve,
Sorry to say I've not had any success in getting Compressor 4 to work. I've tried every suggestion mentioned earlier on this topic to no avail. Compressor 4 is dead in the water. On the last two projects I had to go back to Compressor 3.x.xx to complete the projects. The only hint that I have of wha may have happened concerns something I did early on. When I bought this computer I decided to replace the hard drive with a larger one. Since I already had my software up and working on the drive that came with the computer I decided to clone everything to the new larger drive. As I recall, Compressor 4 worked on the original drive but it doesn't work on this cloned version. So maybe there is a relationship there. I haven't had a chance yet to reinstall my old drive and see if C 4 works on it. If it does work then I know the source of the problem but not how to fix it on the new drive. Did you do anything like cloning your drive recently too? It's just a thought and may not lead anywhere but later this week when I catch a break I'll give the old drive a try and will post my results.
Thanks,
Peter

Status are "open" in CRM but not same shown in replicated sales Doc.

Dear Experts,
Status are "open" in CRM but not same shown in replicated sales Doc ( R/3 ). please suggest with optimal solution.
Regards,
Sany

Hi Sai,
Thanks for your response, I am using PFAL transaction to transfer the employees from ECC to CRM. and I am using only one emplyee for execution, is there any other transactions to replicate employees.
In ECC, after executing the PFAL transaction, getting successful transfer of IDoc message with green light.
In CRM in WE02, it is showing yellow light for the same IDocs.
but even with yellow light (Warning) some employees are successfully converting into BPs, but some employees are not converting.
I could not trace the problem that, why it is happening. IDocs are reaching to CRM system, but some idocs are not converting into BP where as some IDocs are converting into BPs successfully.
Please help me to resolve this issue.
Your suggestions will be highly appreciated.
Best regard
Raghu ram

HT201232 Hey friends is there anyway to retrieve iCloud password I have forgotten it (apple id & icolud not same)

Hey friends is there anyway to retrieve iCloud password I have forgotten it (apple id & icolud not same)

i buy this from a frien & he also dont know the pw for icloud accont
um using 1 emailfor appstore n other one for i cloud

I want to delete icloud account bt i forget the previous password, my apple id and icloud is not same..its for iphone 6

i want to delete icloud account bt i forget the previous password, my apple id and icloud is not same..its for iphone 6

Hi mahmudul haque chowdhury,
The article linked below details how to go about resetting your Apple ID (for your iCloud account) password.
If you forgot your Apple ID password
http://support.apple.com/en-us/HT201487
All my best,
Allen

I Ask About WCS count Client not same WLC

WCS count Client not same WLC as on WLC count client = 100
on WCS count = 23-23
Wireless Control System Version 5.2.148.0
WLC 7.0.250.0
http://postimg.org/image/9boldeqd5/
http://postimg.org/image/l482i9poz/

Your WCS should have a higher (or not equal) version to your WLC.
I wouldn't even consider troubleshooting WCS problems if your WCS is running 5.X because WCS/WLC firmwares 5.X are very, very buggy.

Dateofbirth and start date not same for infotype 2

Hi Gurus,
Recently we have applied supportpacks for 4.6c in development.I am testing for hiring action.What i observed is end date for these infotypes changed to 31.12.1999 instead of 12.31.1999 and in infotype 2 employee dateofbirth and start date is not same which is suppose to be same.Startdate of infotype 2 is taken as employee hire date.Infotype 2 has timeconstraint 1.when i am trying to enter date of birth, for some dates it give me an error invalid date. what could be the cause?Help is appreciated
Thanks

Hi,
Please go to SU3 and check for the Date Format under the Defaults tab.
Hope this helps,
Reward points if helpful,
Thank You,

Flash Player 10.2 will not install - not same problem as Audrey below.

Hi,
Using Win 7 home deluxe, was using Flash player no problem until the office had me uninstall it to fix another problem but now will not reinstall, keeps insisting on installing Mc Afee alongside it and then Mc Afee won't install correctly and won't allow Flash Player to install either.
Have repeatedly uninstalled the full Adobe free software suite, and Mc Afee and started from the beginning have tried using the 32 bit IE instead of thr 64 bit, when the window comes up showing the registration it only shows the Quit button will not let me use the Agree or Install button and again and again it keeps installing Mc Afee without being asked, I don't use or need Mc Afee as have Nortons. I have also been turning off the norton antivrus while doing the installation as i know that can interfere with it.
been trying this on and off for some days now, multiple times, and I do need to get this fixed I would appreciate some advice thanks
T

Yes Friend and I posted a message of thanks also which I'm very pleased to send to you personally, the missing link was that little check box you mentioned, I had done the install or tried to many times but never seen that small box so that was the problem.
Very grateful - thanks very much for your time and patience !!
Best Regards
Tim
Date: Thu, 14 Apr 2011 10:53:23 -0600
From: [email protected]
To:
Subject: Flash Player Flash Player 10.2 will not install - not same problem as Audrey below.
Hi, Since you marked your thread as answered, I'm assuming you have FP Installed and working!!
Thanks,
eidnolb
>
Message was edited by: Timsan55

How to recall back my system preferences password cause i forgot it, the password is not same with apple id?, how to recall back my system preferences password cause i forgot it, the password is not same with apple id?

how to recall back my system preferences password cause i forgot it, the password is not same with apple id?, how to recall back my system preferences password cause i forgot it, the password is not same with apple id?

I'm assuming you mean the admin password.
https://discussions.apple.com/docs/DOC-4101

ı have installed an application about lock system but the application isnt about lock systm this is an code reader. when ı see the application's pictures this is an lock application but content not same. I have got laid...what shoul I do?

I have installed an application about lock system but the application isnt about lock system this is an code reader. When ı see the application's pictures this is an lock application but content not same. I have got laid...what should I do?

semihtinas wrote:
Please make something these fraudsters
You're not addressing Apple here. This is a user to user technical support forum. You can submit feedback to Apple here:
http://www.apple.com/feedback
Other contact information can be found using the Contact Us link at the bottom right of every page.

0CUSTOMER Hierarchy - not same as in vdh2n

Similar Messages

Maybe you are looking for