0customer problem
Hi,
I tried to enhance 0customer_attr with a couple of fields from adrc table. i added those fields and unhid those fields too. before writing the code to populate them with data, i tried to check first whether these fields are added in rsa3 but i am not able to find it. what am i doing wrong. well i can find those fields in rsa6.
centrino
Hi Arun,
If it is a direct enhancement of MASTER DATA, in this case 0CUSTOMER_ATTR. Why is it needed to change the ROOSFIELD entry. It is usually changed when the RSA6 contains the SELECTION option graded out. Please correct me if I am wrong.
In the current issue, I beleive the issue is with the enhancement. Usually the procedure used for BC master data enhancement follow the below stated steps:
1. Go to RSA6 in R/3, select the one you want to enhance.
2. Click on the button "Enhance Extract Structure. follow the process.
3. Go to CMOD or SMOD. The enhancement is RSAP0001. Have the chunck of code for the enhancement in place.
4. Goto RSA3 and check that, the data is populated perfectly.
5. On BW end, follow the standard procedure. (i.e. Replicate DS, ......)
Regards,
GPK.
Similar Messages
-
Problem with infosource for 0customer
Hello Experts
I am workign in 3.5 Bw system. We have a 0customer master data object and values are being populated from ECC system.
I am not able to look at infosource and whenever i try to expand 0customer in RSA 1 it gives me ABAP dump which i dont understand.
Moreover i have check 0customer using RSRV and there is no problem with infoobjet.
Regards
SudeepHi
Error analysis says
"Short text of error message:
Internal error in Data Warehousing
Long text of error message:
Diagnosis
An internal error occurred. Th
state.
System Response
The system terminates data pro
last correct system state.
Procedure
Search for SAP Notes describin
Procedure for System Administratio
Technical information about the mes
Message class....... "RSAWBN"
Number.............. 000
Variable 1.......... " "
Variable 2.......... " "
Variable 3.......... " "
Variable 4.......... " "" -
Hi,
We have a very weird problem after deleted the assignation datasource...
0CUSTOMER_ATTR
0CUSTOMER_LKLS_HIER
0CUSTOMER_TEXT
Now when tried to assign datasource again we got the messagge:
"The DataSource is already assigned to InfoSource"
How can i assign again the datsource???
Best Regards
JuanSorry.. i dont understand...
The infosource is 0customer and the datasources i need to assign are:
0CUSTOMER_ATTR
0CUSTOMER_LKLS_HIER
0CUSTOMER_TEXT
and the message is
The DataSource is already assigned to InfoSource 0CUSTOMER_ATTR
Best Regards
Juan -
Problem with master data lookup in transformations
Hi,
We're experiencing a strange problem in the transformations for an Error Reporting scenario.
We've the SAP standard customer (0CUSTOMER) in DSO 2 which derives it's value from the navigational attribute of YCUSTNR (0CUSTOMER is the navigational attribute of YCUSTNR) in DSO1. But the problem here is that even when there is no entry for YCUSTNR, the 0CUSTOMER in DSO 2 returns a value.
Referential Integrity check is not employed for this scenario. Is it because of this reason that lack of master data is returning some value held in memory. I'm not sure whether it's an issue with the cache. Is there any work around for solving this problem other than the standard master data look up?
Any help in this issue would be appreciated and rewarded.
Thanks & Regards
HariNote 1031553 - Reading master data returns value that does not exist
will solve this problem.
Regards,
József. -
HI Experts,
I have one data mart from 0SD_C03 to IC_MIS, I have added one attribute in 0CUSTOMER and I made it that attribute as a navigational
in 0SD_C03 also i made it as navigational, after that I loaded data from 0SD_C03 to IC_MIS at that time it is showing still running process, I checked in manage tab records are transfered but not added.
In SM37 job also finished.
I didn't added anything in second cube......
wt will be the problem,
Please help to do this.........
Thanks in advance,
Venakt.
Edited by: Siegfried Szameitat on Nov 3, 2008 10:12 AM
deleted points offerHello,
Try activating the cube 0SD_C03 and IC_MIS.
If you need the navigation attr in IC_MIS, then try to make that settings too.
Make the request RED and delete the request you loaded even from PSA and schedule the load again
Regards,
Dhanya -
Query Problem With Exception Aggregation
Hello,
I have two I/O 0Customer and 0Cont_Acct and also I have a Infoset made out of both. Here is the problem i am trying to solve,
I want to figure out the customers who has more than five contract accounts associated with each customer number.
Here is the solution I approached....
1) Created a formula variable counter on the KF # of data records (which is provided in the Infoset automatically ) with exception aggregation total while referencing the contract acct I/O.
2) Kept my customer # and Contract acct on my rows area.
The results I am getting is less than satisfying. I am expecting this output below.
Customer # Cont Acct Total No of Cont.acct
A 1001 1
1002 1
1003 1
3
B 1007 1
I would appreciate anybody's help in this. Thanks a lot.
-AHi,
We have the same problem and raised an OSS ticket. They replied us with the note 1257455 which offers all ways of improving performance in such cases. I guess there s nothing else to do, but to precalculate this exception aggregated formula in data model via transformations or ABAP.
By the way, cache can not help you in this case since exc. agg. is calculated after cache retrieval.
Hope this helps,
Sunil -
Master Data is not showing for 0Customer info obeject in the portal
Hi Experts,
I'm facing an issue with 0CUSTOMER Info object. When I tried to execute the query from Query designer(BI 7.0) it is not showing all the customers in filter for 0CUSTOMER in WEB but it is showing all values for other characteristics(i.e 0MATERIAL).
I tried to execute same query in Bex Analyser and RSRT but it is showing all the customers list in filter for 0CUSTOMER. I have this problem in WEB only
Please suggest me why 0CUSTOMER is not showing all the values in WEB.
Thanks,
Jaypalin WEB, all values wont be displayed in single page if the list is too long, There will be a button to navigate to the next page and select. Please check that.
-
Hi Gurus,
I am facing a problem here I am using RRI there in RSBBS I have included two queries in One query. After I excuted query when I am trying to navigate to the another query which I have included it is giving me the variable screen i.e input selection screen.
I dont want to the variable screen to appear it should pich the characterstic on which I go for GOTO it should pick automatically.
How can I solve this?
Regards,
SridharHi,
In ur RSBBS-Assigments
The Infoobjcts shud be avaliable in both the Queries.
The objects for which u want to jump shud be avaliable as Input Variable ,in the assignments Make the same infoobjects which u want to jump from Query one to Query two as
TYPE-Infoobject instead of Generic.In the Field give as object name-Tech Name,say 0CUSTOMER,Selection Type as Paramters.
Come bak if u still have issues.
Rgds
SVU
Edited by: svu123 on Oct 26, 2009 10:46 AM -
Transfering 0CUSTOMER from R/3 and activating in Business Content
Hi all,
New to BW. Trying to learn Data Transfer. Need help activating infoobject 0CUSTOMER in Business Content. I transferred 0CUSTOMER from R/3 without any problem. When i try to activate it in Business Content I get the following errors:
1) Char. 0CITY is an navigational attrib. of 0vendor. Exclusive attrib not possible
2) InfoObject 0CITY being used in InfoCubes or ODS objects --> error:
3) Characteristic 0CURTYPE: The length has changed from 000003 to 000002
4) SID Table /BI0/SCURTYPE contains data: Characteristic 0CURTYPE cannot be activated @35\QLong text exists@
Any suggestions would be greatly appreciated.
Thanks,
Prabhu.Prabhu,
The error messages you got are for those InfoObjects that are already activated, and whose active version is different from the business content version. When you are installing 0CUSTOMER, you need to be very careful as to NOT INSTALL those objects that are already active, unless you specifically want to.
in the BC scrren, Right click on the 0CUSTOMER, and select "remove optional objects". Then the system will not select the active objects for installation again. Even after you do this, expand 0CUSTOMER tree to the lowest level and see what objects are prompted for installation. And remove the check marks for those objects which are alrady active
1) Char. 0CITY is an navigational attrib. of 0vendor. Exclusive attrib not possible
0CITY has been modified and the flag "attribute only" has been removed from it. You are trying to install it again, which puts the flag back. But, since it is being used as a NAV attibute, you can not do that. hence the eror.
2) InfoObject 0CITY being used in InfoCubes or ODS objects --> error:
Same reason as above. When you mark something as 'attribute only' it can't be used in InfoCubes or ODS objects.
3) Characteristic 0CURTYPE: The length has changed from 000003 to 000002
0CURTYPE in active version is different from the business content version. You are trying to change that again.
4) SID Table /BI0/SCURTYPE contains data: Characteristic 0CURTYPE cannot be activated @35\QLong text exists@
same reason as above.
Good Luck
Gova -
Different Problems during Business Content Installation in BI 7.0
HI GURUs,
I'm working on BI 7.0. Here I'm trying to do business content installation and facing the following problems.
Question 1:
Let's say when I'm trying to install 0MATERIAL infoobject
Scenario 1:
( with Necessary Objects as Grouping), the job is finishing succesfully, but when I look for 0MATERIAL in Infoobjects of Modelling it is found in Unassigned characteristics Node where as it should have been in 0MMIC_CHA01 Catalog & secondly it's not in Active state. When I tried to manually activate it I'm getting the error stated in Fig 1b of attachment.
When I tried for Object Maintanance of 0MATERIAL in Business Content Screen i'm getting the same error (Fig 1a & 1b).
Scenario 2:
(_with Dataflow before and afterwards as Grouping_). In this scenario i'm getting the issue shown in fig 2. I would like to understand why this issue is popping up, specially the source system issue.
Note: The Figures are found in the file attached with this link.........
[Bi Content INstallation Error Doc|http://rapidshare.com/files/269891244/BI_Content_Installation_Errors.doc.html]
Question 2:
Why are many of the infoobjects like 0Customer, 0Material etc getting assigned to Unassigned Characteristics instead of getting assigned to their respective Characteristic catalogs.
Note: It would be much more helpful if the solution is provided with reference to SAP Note, though alternate solution is always welcome.
Hoping for a early optimistic solution.
Regards,
Syed Shujaath Ali.Hi,
Maintain the material number length in your BW system, tcode- OMSL. Due to this you are getting error, conversion settings are not found for 0material. Check in your source system, what is the material number length has mantained by functional team.
It will sove your issue. -
Missing from 2004s: 0CUSTOMER, 0MATERIAL, ....
Hello,
According to the SAP installation, the following is present in the ECC 6.0 (Netweaver 04s) system
BUT -
0CUSTOMER, 0MATERIAL, etc. is missing
in other words ---
No content at all
What is the problem?
Pts awarded for a working answer.
TIA
SAP_BASIS 700 0009 SAPKB70009 SAP Basis Component
SAP_ABA 700 0009 SAPKA70009 Cross-Application Component
PI_BASIS 2005_1_700 0009 SAPKIPYJ79 PI_BASIS 2005_1_700
ST-PI 2005_1_700 0002 SAPKITLQI2 SAP Solution Tools Plug-In
SAP_BW 700 0009 SAPKW70009 SAP NetWeaver BI 7.0
SAP_AP 700 0006 SAPKNA7006 SAP Application Platform
SAP_HR 600 0007 SAPKE60007 Human Resources
SAP_APPL 600 0006 SAPKH60006 Logistics and Accounting
EA-IPPE 400 0006 SAPKGPID06 SAP iPPE
EA-APPL 600 0006 SAPKGPAD06 SAP Enterprise Extension PLM, SCM, Financials
EA-DFPS 600 0006 SAPKGPDD06 SAP Enterprise Extension Defense Forces & Public Security
EA-HR 600 0007 SAPKGPHD07 SAP Enterprise Extension HR
EA-FINSERV 600 0006 SAPKGPFD06 SAP Enterprise Extension Financial Services
FINBASIS 600 0006 SAPK-60006INFINBASIS Fin. Basis
EA-PS 600 0006 SAPKGPPD06 SAP Enterprise Extension Public Services
EA-RETAIL 600 0006 SAPKGPRD06 SAP Enterprise Extension Retail
EA-GLTRADE 600 0006 SAPKGPGD06 SAP Enterprise Extension Global Trade
ECC-DIMP 600 0006 SAPK-60006INECCDIMP DIMP
ERECRUIT 600 0006 SAPK-60006INERECRUIT E-Recruiting
FI-CA 600 0006 SAPK-60006INFICA FI-CA
FI-CAX 600 0006 SAPK-60006INFICAX FI-CA Extended
INSURANCE 600 0006 SAPK-60006ININSURANC SAP Insurance
IS-CWM 600 0006 SAPK-60006INISCWM Industry Solution Catch Weight Management
IS-H 600 0006 SAPK-60006INISH SAP Healthcare
IS-M 600 0006 SAPK-60006INISM SAP MEDIA
IS-OIL 600 0006 SAPK-60006INISOIL IS-OIL
IS-PS-CA 600 0006 SAPK-60006INISPSCA IS-PUBLIC SECTOR CONTRACT ACCOUNTING
IS-UT 600 0006 SAPK-60006INISUT SAP Utilities/Telecommunication
SEM-BW 600 0006 SAPKGS6006 SEM-BW: Strategic Enterprise Management
LSOFE 600 0006 SAPK-60006INLSOFE SAP Learning Solution Front-End
Edited by: Casey Harris on Mar 11, 2008 10:38 PMHi and thanks for the detailed response.
OK, I went to the Netweaver 04s box and saw BI_CONT under the "System:Component Information" but did not see it in the ECC 6.0 box. I had assumed that since I saw BW Content come with the Netweaver 04s box (Solution Manager) where there are no application components - i.e. SD, MM, FI, CO, etc., that it would also have come with ECC 6.0 - which does have the application components :-|
But obviously, this is not the case although, it seems that the datasources are present for both systems: Netweaver 04s and ECC 6.0
One last question though please ...
When doing "Modeling: Source Systems : BI", under it is the client for BI (which is CLNT<SID>001 - ex: CLNTXYZ001) for example. When double clicking on this, one sees all of the datasources here. But one has to "replicate" them to the BW side.
What exactly are we replicating to? I log into Box: XYZ Client:001 - which is the BW client, yet, I have to replicate datasources from CLNTXYZ001 "to the BW side".
CLNTXYZ001 looks like the "myself" system.
Thanks once more for all of the help ... -
Problem with Transformation Routine
Hi all
I am using a DSO 0FIGL_O02 taking data from the DataSource 0FI_GL_4 . I have a field 0Customer to the DSO & for that i´m taking data from the another DSO ZPCA_EC3 .
The folllowing is the Tranformation Routine i have tried
Routine 1,
Data : zcustomer type /BIC/AZPCA_EC300-CUSTOMER.
select single customer
from /BIC/AZPCA_EC300
into ZCUSTOMER
where AC_DOC_NO = SOURCE_FIELDS-BELNR.
RESULT = zcustomer.
Routine 2.
Data : zcustomer type /BIC/AZPCA_EC300-CUSTOMER.
select single customer
from /BIC/AZPCA_EC300
into ZCUSTOMER
where AC_DOC_NO = SOURCE_FIELDS-BELNR
and COMP_CODE = SOURCE_FIELDS-bukrs
and FISCYEAR = SOURCE_FIELDS-gjahr.
RESULT = zcustomer.
I dont get any errors for this Routine , But when i run the DTP it is going on Running & Running for hours, with no results , But again no errors also.
What could be the problem ?
Could anyone help me write a better routine .here is my requirement
I want to pick up 0Customer field data from ZPCA_EC3 based on 0AC_DOC_NO in both ZPCA_EC3 & 0FI_GL_4 DataSource.
Regards
RameshHi,
well I don't know the key of your ods. But the first check would be to use fields in the where clause which are in the key or a additional index. Another option might be to select the data for the complete data package at once into a internal table and access the internal table in the routine. May be you can also do the whole thing in the start routine.
regards
Siggi -
Navigational Attr. problem
Hi,
We have reference char. which is refering to 0CUSTOMER.
This has Nsv. Attr. 0COUNTRY.
We are using this Nav. Attr. as selection parameter for Query.
The problem is that for the customers of GREECE country there are double entries in the master data with different Source SYS ID. One entry with country GREECE and Source Sys ID P1 , the other entry is without country and Source Sys Id FF.
If we input GREECE in the query selection parameters it is not retriving any data.
I have checked data in the cube, data exists for these Customers.
I have checked CUBE & Infoonject using RSRV, everything is fine.
What could be the solution?
Regards
SSSHi SSS,
Can't compound Country with source system?
Udo -
S_RS_IOBJ - authorization problem
Hi
How in Nw2004s implement this problem:
Query have characteristic 0material, 0comp_code and 0customer.
User A must see only 0material and user B 0comp_code and 0customer.
Create 2 query isn't good solution.
Best Regards
PiotrDear Piotr,
Sorry but a donu2019t understand you question,
Regarding the authorization system in BI 2004s, you have two levels. First, you restrict access by object (authorization object, mange through tcode: pfcg); second, you restrict access by characteristic and navigational attribute values (analysis authorizacion, manage through tcode: rsecadmin).
If BW 3.5 it works good, the problem must be in the reporting authorization object 3.5, now analysis authorization in 7.0. Because the authorizations object has the same behaviour in both versions.
According explanation give above, you should be focus in the analysis authorization, but I need more details. For example the User A and User B what do they do?, they can create query, or only execute query. In case of, they only need execute query and display data. The authorization by focus in analysis authorization, and we need have to check, the query structure, and what characteristics (0MATERIAL, 0COMP_CODE, 0CUSTOMER) in InfoProvider are joined and which characteristic are relevant of authorization.
For example, in your scenario, you need that user A should display 0MATERIAL value,
In this case you need to create an analysis authorization (through tcode: RSECAUTH), where have to the following design:
0MATERIAL: specific values that you need
0COMP_CODE: u201C:u201D aggregate value
0CUSTOMER: u201C:u201D aggregate value
For the user B, the design must be:
0MATERIAL: u201C:u201D aggregate value
0COMP_CODE: specific values that you need
0CUSTOMER: specific values that you need
I hope this suggestion can help you to answer your question,
Luis -
0MATERIAL and 0CUSTOMER Delta error
Hi Gurus,
I have a problem regarding the 0MATERIAL and 0CUSTOMER Delta. It stopped due to an error in source system. When I tried to do a Repeat Delta, the system did not permit me because the Infosources does not allow update mode R (repeat). I checked previous SDN topics and found the solution.
1. Delete 'Delta Init' in Delta Channel (InfoPackage)
2. Do a Init load.
My questions are:
1. Is this the proper process or did I misinterpret the posts.
2. Would creating a new Init for the InfoSource not affect the data in the Cubes?
3. Do I have to create a Delta right after the Init?
Please advise,
JakeHi Jake,
1. Is this the proper process or did I misinterpret the posts.
>>Solution suggested by you is fine,
2. Would creating a new Init for the InfoSource not affect the data in the Cubes?
>> It should not affect the cube data, remember to activate your master data ( customer & material) after data load ( right click -->activate)
3. Do I have to create a Delta right after the Init?
>> you need to create delta Infopackage whenever you wish to take delta from R/3. When you do the intialization system starts tracking delta for you irrespective of whether you create delta infopackage in BW or not.
hope it helps
regards
VC
Message was edited by: VC
Maybe you are looking for
-
Just Recently bought a new Mac, because my old PC crashed again, ( finished w/ microsoft) but now i would like to migrate data from my external drive i used on my PC to my new Mac. i loaded the Migration assitant from utilities but didnt see how to m
-
Connecting Mac to TV! Please Help
Hi guys, I just bought a mini display port to dvi cable and a dvi to hdmi cable. I go home and plug the mac into the tv. My mac flashes blue for a second. The tv says there is no video signal. What is the problem here and what do I do? Thank you so m
-
Setting From Field/Gmail?
I have two email addresses: 1. one from a university I attended (this is a virtual address) 2. one from the telephone company (this is a real address) Mail can be sent to my university address and is forwarded to my real address. The problem I'm havi
-
Middle mouse button problem after arch update
Dear Arch Users, I have a very strange problem in xfce4 with middle mouse button after arch linux update. It is especially annoying in firefox. Earlier, the middle button just opened a new tab (in firefox) now it also tryies to go back everywhere it
-
Splitting dataset into regions using sdo_relate
Hi all, I am having difficulty subdividing my dataset into different regions. I have the spatial data of the city auckland and found the co-ordinates of the lower left and upper right limits of the data. What I want to do now is to break up this data