0distr_chan initial master data load, text missing

Hey: I am trying to do an initial master data load for 0distr_chan on text. The load is not successful. In the monitor detailed error message, it has red alert for transfer rules missing message, update missing message.
0distr_chan attibute is OK.
I am also having problems when loading 0salesorg on text. It fails also.
Can anyone give me a clue?
Thanks!

Hi, thank you for your answer. I am new to this system. Please give me more guidance.
To check on datasource on R3, I use transaction RSA6, underneath the SD-IO master data, I found 0DISTR_CHAN_TEXT with green text icon on the right. Is this a valid way to verify that datasource for 0DISTR_CHAN_TEXT has been activated OK on R3? I am not sure if there is any way for me to check if any transfer rules for the datasource has been activated OK on R3.
thanks!

Similar Messages

  • Master data load: texts are not loaded

    Hi friends,
    Trying to load BW Hierarchy(0COSTCENTER) to BPC dimension(P_CC).
    Loadedd master data & text data using package "Import master data from BI infoobject"(/CPMB/IMPORT_IOBJ_MASTER), but EVdescription (texts) are not uploaded ino BPC dimension (P_CC).
    Because of above error, when i try to load hierarchy(0costcenter), sytem throwoing one more error(JScrpit evaluation error).
    Now i want to load texts into P_CC. ours is bpc 75nw sp10.
    Found 2 notes, but these are related to older support packges
    1462732 u2013 DM: text node descriptions canu2019t be imported.
    1531601 - Incident 737084 / 2010 / text nodes aren't loaded
    Transformation file:
    *OPTIONS
    FORMAT = DELIMITED
    HEADER = YES
    DELIMITER = TAB
    AMOUNTDECIMALPOINT = .
    SKIP = 0
    SKIPIF =
    VALIDATERECORDS=YES
    CREDITPOSITIVE=YES
    MAXREJECTCOUNT=-1
    ROUNDAMOUNT=
    *MAPPING
    ID=ID
    CURRENCY=0OBJ_CURR
    *CONVERSION
    DM package run:
    Infoobject: 0COSTCENTER
    set selection: Attributes Controlling area = SP00
                           Hierarhcy: import text node(yes), selected hierarchy, version(empty),memberid(SP001170),level(not filled)
                           language: English, medium description,
                          attiribute list: currency(0OBJ_CURRENCY),controlling area
    fileter by attributes or hierarhies option selection,
    Mode: Update
    Format: internal
    Dimension: P_cc
    package ended with error
    Failed to write text of master data; check the error message
    checked BPC dim, only member ID & currency is updated, but not evdescription.
    Can you please share valuable inputs.
    thanks,
    naresh

    resolved problem.
    Packages given bpc7.5 nw sp10 are is exactly working.
    Mapping section:
    ID=0CO_AREA+ID
    CURRENCY=0OBJ_CURRENCY
    becoz base members are automatically added with controlling area in BW hierarchy on 0costcenter.
    Followed method given in how to guide.

  • Master data loads for Attributes and texts failing

    Hello
    Master data loads for Attributs and texts are failing. The error is
    1. Lock Not set for Loading master data attributes
    2.Table /BI0/YAccount does not exists (this error is for 0Account master data - attribute load)
    3.Error  1 in the update.
    We had faced this error few days ago and rebooting the server resolved the error but it has recurred after 4 days.
    RS12 and SM12 do not show any locks. Activating the info object has also not resolved the error.
    Any insight is appreciated.
    Thanks
    Inder

    Hello
    Master data loads for Attributs and texts are failing. The error is
    1. Lock Not set for Loading master data attributes
    2.Table /BI0/YAccount does not exists (this error is for 0Account master data - attribute load)
    3.Error  1 in the update.
    We had faced this error few days ago and rebooting the server resolved the error but it has recurred after 4 days.
    RS12 and SM12 do not show any locks. Activating the info object has also not resolved the error.
    Any insight is appreciated.
    Thanks
    Inder

  • Loading GL Master Data -- Attributes, Text, Hier ; and Transaction Data

    Hi all,
    Could any one give me the steps individually to load the following type of data in BI 7.0:
    1. Master Data with Attributes
    2. Master Data with Text
    3. Master Data with Hierarchy
    4. Transaction Data
    Do I have to create the Transformation and DTP's individually to load all the above kind of Data?
    Please give me the information as much as you can.
    Thanks,

    For master data when you create tranformation it will prompt infoobject to act as infoprovider, and then you create DTP to schedule data to it. It works fine with attribute and Texts, though hierarchy dosn;t support much features of 2004s at my side. Like i am not able to migrate Hierarchy datasource to 2004s, and even when i replicate it, it comes as 3.5 datasource only.
    For transaction data follow Gokuls step, or try to find on forums you will get lot of discussion on it.

  • Master Data load does not extract Hierarchy nodes in BPC Dimension ACCOUNT

    Hi Experts,
    I am performing master data load through standard DM package with Filter selection as:
    1. Chart of Accounts
    2. Hieararchy selection has 4 hierarchy names
    3. Selected Import Text nodes
    4. Selected Set Filters by Attribute OR Hierarchies
    I have run this DM package for a set of data and selections a week ago and it worked fine.
    However when i run it now, it is giving issues,
    It extracts any new GL maintained in the BI system however it does not extract any hierarchy nodes at all! (Have tested this by deleting the hierarchy nodes and tried to run the master data load)
    I am running the DM package in Update and have selection as External.
    Any sugestions for checks / has anyone encountered this issue earlier?
    Regards,
    Shweta Salpe

    Hi Guyz,
    Thanks.
    I found that the issue was with the transformation file where i was maintaining the RATETYPE.
    When i removed the mapping of RATETYPE this works fine. (Pulls the nodes of hierarchies)
    however now i do not have Ratetype populated in the system.
    my rate type mapping is:
    RATETYPE=*IF(ID(1:1)=*STR(C) then *STR(TOSKIP);ID(1:1)=*STR(H) then *STR(TOSKIP);ID)
    and in conversion file i have TOSKIP     *skip
    I have to skip the ratetypes for the hierarchy nodes and my hierarchy nodes start with C and H.
    So now that i have removed the mapping for RATETYPE can anyone suggest me a correct way to achieve this? (Note the above mapping formula was skipping all of the hierarchy nodes starting with C and H)
    Regards,
    Shweta Salpe

  • Master data medium text

    Hi,
    Master data medium text and long text is not appearing eventhough i checked Medium and long texts in the master data /texts tab page.Plz let me know the solution.
    Thanks,
    Sr

    Hi,
    Where is it not appearing...in the reports??
    Just check the business explorer tab for this infoobject and see what is the text maintaned there...if it is short text then you will have to change it to long or medium...the way you want.
    Check in the tables and do the mappings and load the data in these two fields...you will get an option to map them in trnasformation.
    once loaded  and activating the master data and making the settings in the business explorer...you should be able to see it in reports.
    Thanks
    Ajeet

  • Master data load gives dump with exception CX_RSR_X_MESSAGE

    Hi all,
    I scheduled master data load for 0MATERIAL in our BI 7.0 Quality server. The load ended in dump with the exception CX_RSR_X_MESSAGE. The data has loaded into PSA( 37257 from 37257 records) but the technical status is red and has not updated the master data object.
    I have seen note 615389 which talks about number range but the check is successful. The data load was successful in development server. This error has occured only in Quality.
    We are on SP 12 in BI 7.0.
    We are moving to production soon, so this is an urgent issue. I would appreciate if anyone responds soon. Points will be rewarded.
    with regards,
    Ashish

    Hi,
    The log of the dump is given below.
    Error analysis
    An exception occurred which is explained in detail below.
    The exception, which is assigned to class 'CX_RSR_X_MESSAGE', was not caught
    and
    therefore caused a runtime error.
    The reason for the exception is:
    No text available for this exception
    Information on where terminated
    Termination occurred in the ABAP program "SAPLRRMS" - in "RRMS_X_MESSAGE".
    The main program was "SAPMSSY1 ".
    In the source code you have the termination point in line 78
    of the (Include) program "LRRMSU13".
    Source Code Extract
    Line
    SourceCde
    48
    *... Nachricht an den Message-Handler schicken
    49
    50
    *... S-Meldung wenn kein Handler initialisiert
    51
    DATA: l_type  TYPE smesg-msgty,
    52
    l_zeile TYPE rrx_mesg-zeile.
    53
    CALL FUNCTION 'MESSAGES_ACTIVE'
    54
    IMPORTING
    55
    zeile      = l_zeile
    56
    EXCEPTIONS
    57
    not_active = 1.
    58
    IF sy-subrc NE 0.
    59
    l_type = 'S'.
    60
    ELSE.
    61
    l_type = 'W'.
    62
    ENDIF.
    63
    64
    CALL FUNCTION 'RRMS_MESSAGE_HANDLING'
    65
    EXPORTING
    66
    i_class  = 'BRAIN'
    67
    i_type   = l_type
    68
    i_number = '299'
    69
    i_msgv1  = i_program
    70
    i_msgv2  = i_text.
    71
    ELSE.
    72
    DATA: l_text  TYPE string,
    73
    l_repid TYPE syrepid.
    74
    75
    l_repid = i_program.
    76
    l_text  = i_text.
    77
    >>>>>
    RAISE EXCEPTION TYPE cx_rsr_x_message
    79
    EXPORTING text = l_text
    80
    program = l_repid.
    81
    ENDIF.
    82
    83
    ENDFUNCTION.
    I went to SM21 and went through the system log.  There was a log with the following text  ORA-20000: Insufficient privileges#ORA-06512: at
    "SYS.DBMS_STATS", line 2150#ORA-06512: at "SYS.DBMS_STATS.
    I found a note 963760 for this error. After the changes said in this note were done I reloaded the data and it worked fine. Data load for another data source which gave dump now worked.
    I am not sure if the note did the trick. So i am keeping this post open in case someone finds another solution or can confirm the solution which worked for me.
    Thanks Oliver and Oscar, for replying.
    regards,
    Ashish

  • Material master data load

    Hi all,
             I am new to loading master data, i have searched forum still getting more confusion, My requirment like material master
    data load i like to know what data source have to use and how to load into target, please guide me step by step.
    thank u

    hello there,
    lets first define what you want, e.g. attribute, text or hierarchy, it can be all 3 as well.
    if you want attribute for material master data you can use 0MATERIAL_ATTR
    for text you can use 0MATERIAL_TEXT and for hierarchy you can use 0MATERIAL_HIER
    all material master data goes into infoobject 0MATERIAL. good luck and feedback if you need further assistance.

  • 7.5 Hierarchy Master Data Load

    Hi experts,
    I am trying to load material masterdata with a hierarchy.
    When I was loading my members I applied an attribute filter.
    It loaded OK and loaded the hierarchy nodes ok.
    Then as I went to load the hierarchy it gave me an error saying that "Hierarchy nodes include dimension members that do not exist"
    When I checked through the log I could see that the "missing" members where all the ones that I had filtered out with the attribute filter.
    But it seems the hierarchy load needs them?
    Is there a way to apply the same filter in the hierarchy load? Or any other way around this?
    Or can an attribute filter only be used if you are not loading hierarchies?
    Thanks

    Hi Joergen,
    Thanks so much for your quick reply.
    My problem is not that my nodes don't load. They do actually come through fine in my first master data load.
    But then when I load the hierarchy BPC complains that the node I want to now create as parents has members that don't exist in BPC. These are basemembers, not nodes.
    For example:
    BW:
    Parent A:
       Child A
       Child B
       Child C
    BPC
    I only load Child A and Child B because Child C does not meet the attribute filter
    When I then load Parent A I get an error that Child C is missing?
    Regardless I tried your method and it didn't work for me?
    -First I loaded my members only with the attribute filter - no problem
    -but then I put in a rubbish filter like you said and ticked to load the hierarchy nodes. When I choose the AND filter nothing is being loaded at all. when I choose the OR filter it loads everything (incl the members that I excluded in the first load)?
    Did I understand that wrong?
    Thanks
    Sabine

  • How many tables are created in Master data loading ( Including hierchy )

    hi ,
    Please anybody , can you tell us how many tables are created in Master data loading ( Including hierchy )
    thanks
    Phani

    Hi PP,
    Depending upon the definition of an infoobject, the tables are created when the objects are activated.
    /BI<C OR DIGIT>/<TABLE CODE><INFOOBJECT>
    <C or digit>: C = Customer-defined InfoObjects
    digit = SAP-defined InfoObjects
    <table code>: S = SID table
    T = Text table
    P = Time-independent master data attributes
    Q = Time-dependent master data attributes
    M = Union of time-dependent and time-independent master
    data attributes
    X = SID table for time-independent navigational attributes
    Y = SID table for time-dependent navigational attributes
    H = Hierarchy table
    K = Hierarchy SID table
    I = Hierarchy SID structure table
    J = Hierarchy interval table
    Thnaks...
    Shambhu

  • BI Statistics Master Data Load

    Hi,
    We are implementing BI Statistics and BI Administration Cockpit.  One of the OSS Note 934848 mentions that I have to install/activate all the datasources that are under the Application Component BW_TECH --> TCT.
    My question is do I have to consider loading the master data for all those datasources/infoobjects ?  There are nearly 80 - 100 datasources.
    The note 934848 mentions to install the Business Content Process Chains.  And I see that those process chains are hardly loading 10 - 12 master data loads.  Is it OK if I just make use of those business content process chains to load master data ?
    Initially I have created DTP's and Transformations to load master data for approx 50 objects.  Later I came to know that BI statistics Cubes etc follow the 3.x format and I should use those as it is delivered.  So, can't I still make use of the 7.0 converted datasourse objects with DTP to load the data ?
    -or- do I have to delete all the transformations and DTP's and migrate all those DataSources back to 3.x ?
    Thanks,

    Hi Sesh,
    1. Yes you need to activate all those Datasources. Its better to activate all of them as in BI 7.0 TCT infoproviders are used as basis for Workload monitor ST03 also in addition to Admin cockpit.
    2. Its sufficient to just load the master data using the standard process chains (Init chains once followed by delta chains.
    3. Its recommended to use the TCT content as 3.x only.
    4. No need to migrate the 3.x content, just use as it is.
    for more information you can refer to this <a href="https://forums.sdn.sap.com/thread.jspa?threadID=279998&tstart=0">thread</a> and related posts by <a href="https://forums.sdn.sap.com/profile.jspa?userID=2035002&start=0">Rajani Saralaya K</a>
    Assign points if helpful,
    Regards, Uday

  • QM action not allowed for DTP requests in master data and Text tables

    Hi,
    I have a master data object load request which has failed, returned error in st22 and job finished.
    BUT the request has not turned red in the monitor - it's still yellow. That means that I can not delete request nor start new load to infoprovider because it believes a request is still running. But it's not, I've checked both sm37, sm50 etc.
    When trying to manually change QM status to 'red' it says 'QM action not allowed for DTP requests in master data and Text tables'
    How can I force QM status to red so that I can move on?
    Running NW2004s BI (7.0) Patch 15.
    I searched for this question but there is no answer
    Thank you

    Folks
    I know how frustrating this problem is even in netweaver 7.0 environment. I found a solution for this problem atlast and it works but a not direct way of resolving this issue.
    When this request is in yellow status and not able to change / delete the request, its actually in a pseudo status and it is a bug in the program. This request sits in table RSBKREQUEST with processing type as 5 in data elements USTATE, TSTATE and this 5 is actually "Active" status which is obviously wrong.
    All we need is, ask your basis person to change the status to 3 in both these data elements and then it allows to reload the delta. Once the delta is successfully loaded, you can delete the previous bad request even though it is still in yellow. Once the request is deleted, the request status gets updated as "4" in table RSBKREQUEST.
    Hope this helps.
    Thanks

  • Master data loading in BPC NW 7.5

    Hi all,
    I am trying to load master data from BW into BPC using the packages provided in BPC7.5.
    Master data infoobject in Bw is compounded with 3 other objects.2 of them dont have any master data tables.All they have is a text table(T table).
    When i run the package i get a warning saying compounded object1 is empty.
    i think i am getting the warning because it doesnt have any master data tables(P table,M table and Z table).
    In a different case i had a compounded info object but i didnt have any issue because it had master data table to it.This case is diff since no master data tables exists.
    Can someone help me on how to approach master data loading in a scenario where compounded objects dont have any master data tables.
    Thanks,
    Any help is appreciated.
    KK.

    Hi,
    The document is for BPC when they didnt have the new process chains to load master data.Now they have 2 new process chains.One to load master data attributes and texts and the other one to load Hierarchy.And these 2 packages support compounded info objects too.
    I was able to load profit center attr/texts/hierarchy into BPC although it was compounded to Controlling Area.This wasnt an issue because Controlling Area had master data defined. meaning it had P table and M table created.
    But my issue is for this new master data load i am trying to do the compounded info object doesnt have master data tables.And thats causing an issue.It says Master data table for 0Division is empty.
    I want to know if there is any workaround in BPC for this issue.
    Any help is appreciated.
    Thanks,
    KK

  • BPC NW 10.0 - Master data load

    Hey guys have you tried the automatic master data load in BPC 10.0?
    Would it be possible to perform a delta load for master data?
    When you do a delata load whether the exisiting dimensions and properties will be overwritten or just add another column/row with new members and properties?
    Please provide your thoughts.
    Thanks a million

    By automatic do you mean scheduled? If yes, you can schedule the 'Import Master Data Attrib and Text InfoObj' data manager package. The second prompt will ask if the process should 'Overwrite' or 'Update' (you can also modify the advanced script if you want to always update) Depending on what properties are you populating with your transformation file, those will be updated with what's in the source InfoObject. Assume for example the transformation file in the Mapping section is blank, you have ID '123' with description 'Test' in your dimension and ID '123' and description 'Test - changed' in BW, when the update runs the description will be changed from Test to Test - changed. All other IDs will be added to the dimension. Hope this makes sense.

  • Master Data Loading in Process Chain

    Hello All
    I want to design process chain for Master data loading we have 8 modules in our project such as SD,MM,FI,CO,PP,QM,PM and LO how Design PC .Each Module one start varient and All Text,Attribaute and hierarchies  Loading parallel ofter one Attribute Change run this Approach is Right Please guide me
    and Module dependence are there ?
    Like First load SD then MM like please guide me
    Regards,
    Ravi

    Hi.......
    Welcome to SDN.........
    It is also possible to load like this:
    load attributes
    change run load texts in parallel
    because chnage run and texts don't disturb each other.
    If you want also to load hierarchies the following order is recommended:
    load attributes
    load hierarchies
    changerun
    texts at last or in parallel with changerun.
    And for loading diiffterent area...........first tell me which architecture you are using..........split or LSA........
    as per ur update u didnt mentioned the type of architecture wheather it split,or,LSA or some other thing which u are useing,
    if you use Split architecture the load ,GD,DP,FC from FC completion of master data COPA will start so Complusary load FC first ,,u can run simulateanously (GD,DP,FC)it will be no problemand have to cross check about configuration of ur server also ,later you can start pp,tp in case of HR it will be total independent so check when u want to load
    IN Case of LSA (layerd Scaleable architecture) first laod Masterdata .. which will same for all the Process areas (like 0costcenetr,0employee) later start the Trancation data which you feel which is important as per my knowledege go for FC in turn COPA because usually reports morely based on FC and COPA
    Hope this helps......
    Thanks==Points as per SDN........;)
    Regards,
    Debjani..........
    Edited by: Debjani  Mukherjee on Oct 22, 2008 4:03 PM

Maybe you are looking for